FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ferguson 65 Parts

[Categories] [All Ferguson Models] [Print]

Belts

Brakes

Actuator and Latch Kit - With spring and clevis pin. For tractor models TO35, FE35, F40, MH50, 50, (65 up to serial number 692932), 135, 150, 230, 235, (240 up to 2/1995), (283 Brazil), 20, 20C, 30B, 30D, 35 Turf and Utility, (40, 40B, 50C, 50D with instant reverse transmission), 50. Replaces 181450M1, 181449M1, 180809M1, 181149V1. (Item #: 169743, Ref: 181450M1) $16.80

Brake Pedal Lock - For tractor models 135 UK, (202 gas), (203 diesel), 20D, 20F, 240, 240S, 250, 253, 30E, 35, 40E, (50 serial number up to 533414), (65 serial number up to 692932), FE35, TO35. (Item #: 173120, Ref: 181960M1) $14.20

Brake Pedal Shaft Bushing - For Massey Ferguson tractor models TO35, 35, 35X, 50, 65, 135, 150, 165, 175, 178, 230, 235, 240, 245 (s/n 9A349239-earlier), 250, 253, 263, 265, 265S, 271, 281, 282, 283, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30E, 31, 40, 40E, 202, 203, 2135, 3165, Replaces Massey Ferguson OEM number 195910M1, (Item #: 150916) $13.40

Brake Shoe Set - Includes 2 shoes with linings. 2 inches wide. One wheel set. Tractors: 135 UK, 148, 158 Indust/Const, 165 UK, 175 UK, 178 UK, 20 Indust/Const, 20C Indust/Const, 20D Indust/Const, 230, 231, 240, 240P, 240S, 241, 340, 35 UK, 35X, 50 Indust/Const, 50B Indust/Const, 50D Indust/Const, 50F Loader, 50H Loader, 50HX Loader, 550 UK, 60 Loader, 60H Loader, 65, FE35, TE20, TEA20, TED20, TEF20. Replaces Massey Ferguson: 1810348M91, 1810517M1, 1810517M92, 3620602M91 (Item #: 179590, Ref: 1810517M91) $124.00

Spring, Parking Brake Latch - For tractor models F40, FE35, TO35, 1080, 1085, 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 20, 230, 235, 240, 282, 30, 3165, 65, 35, 35 UK, 40, 50, MH50. (Item #: 173676, Ref: 180809M2) $5.20

Clutch

Carrier - Carrier for clutch release bearing. Carrier bore 2.228 inch (2-1/4 inch approximately), outside diameter 2-1/2 inch. PLEASE CHECK CARRIER BORE BEFORE ORDERING. This part is used on many Massey Ferguson Agriculture and Industrial Models. Replaces 519232M1, 886727M1, 886727M2, 886727M3, 886727T4 (Item #: 112309, Ref: 886727M4) $14.50

No
Picture
Clutch Alignment Tool - Dual Stage Clutch Alignment Tool with 1 1/8 inch by 10 splines and 1 5/8 inch by 25 splines. For tractor models 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 175UK, 178UK, 180, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240P, 240S, 245, 253, 255, 261, 263, 265, 265S, 270, 271, 271X, 271XE, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 290UK, 30, 30E, 3165, 35, 40E, 383, 390, 481, 670, 690, 50, 65, 97, TO35. (Item #: 119890, Ref: 1212-5955) $16.90

Clutch Disc - 6 Pad - For Massey Ferguson tractor models TO35, 35, 50, 65, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 2200, Compatible with Massey Ferguson Construction and industrial models 20, 30, 30B, 30D, 40, 40B, 202, 203, 302, 2135, 3165, Replaces Massey Ferguson OEM number 184542M91, 185892M94, 193141M91, 516068M91, 516068M93, 890302M91, Clutch Diameter: 11", Clutch Hub Diameter: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Regular Pads, (Item #: 122774) $164.00

Clutch Disc, 11 Inch - 10 spline, 1.125 inch hub. For all MF tractors with 11 inch DUAL Clutch, EXCEPT for TO35: (to serial number 177394 and 177520 thru 177537); F40, MH50. Tractors: TO35 late production, 35, 50, 65, 135, 150, 165, 175, 180, M230, MF235, MF245, MF255, MF265, MH50, industrials: 20, 20C, 30, 30B, 30D, 40B.. Will replace 890302M91. (Item #: 112308, Ref: 516068M91) $43.80

Clutch Disc, 9 Inch - 10 spline on a 1 3/4 inch hub diameter. PTO Clutch Disc For 20, 30, 40, F40, MF135, MF150, MF165, MF175, MF180, MF35, MF50, MF65, TO35. (Item #: 163114, Ref: 3620411M91) $52.00

Clutch Disc, Remanufactured - For Massey Ferguson tractor models TO35, 35, 50, 65, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 2200, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 302, 2135, 3165, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Reg Pads, (Item #: 206742) $149.00

Clutch Disc, Remanufactured, 184542M91 - For Massey Ferguson tractor models TO30, 35, 50 (s/n 515433 - later), 65, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 2200, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 302, 2135, 3165, Replaces Massey Ferguson OEM number 184542M91, 185892M94, 193141M91, 516068M91, 516068M93, 890302M91, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads, (Item #: 206741) $114.01

Clutch Fork Shaft, LH - This Clutch Fork Shaft is the left (long) side. It measures 1 inch in diameter by 5-17/32 inches long. It is used with: 184592M1 bushing, 886719M1 fork and 180449M1 RH shaft (each sold separately). Replaces 180444M1, 180444M2, 1679460M1 (Item #: 166103, Ref: 180444M1) $14.60

Clutch Kit, 11 inch, Fine Spline - Our new 11 inch complete clutch kit contains: 11 inch, 25 spline, 1.625 inch hub, standard spring, double pressure plate (532319M91). 11 inch 10 spline, rigid drive disc (516068M93). 9 inch 1 3/4 inch hub PTO disc. Pilot bearing measuring 1.57 inches outside diameter, 0.669 inch inside diameter, 0.472 inch width (832960M3). Release bearing measuring 4.06 inches outside diameter, 2.49 inches inside diameter and 0.870 inch width (892862M2). Clutch alignment tool. For tractor models 135, 150, 165, 175, 175 U.K., 178 U.K., 180, 20, 20C, 2135, 235, 245, 255, 265, 30, 3165, 35, 50, 65, 97, TO35. (Item #: 111060, Ref: 1212-1420) $308.00

No
Picture
Clutch Kit, Remanufactured, 516068M93 - For Massey Ferguson tractor models F40, TO30 (S/N 177395-177519 and S/N 177538-later), TO35 (S/N 177395-177519 and S/N 177538-later), 35 (S/N 245087-later), 50, 65, 135, 150, 2135, Compatible with Massey Ferguson Construction and industrial models 20 (IND S/N DC2061-later), 202, 203, 302, 304, Replaces Massey Ferguson OEM number 516068M93, 526665M91, Clutch Diameter - 11", Clutch Hub Diameter - 1-1/8", Clutch Splines - 10, Clutch Center - Solid Offset, Clutch Type - Woven, Pressure Plate Size - 11", Pressure Plate Levers - 3, Pressure Plate Springs - 9, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 10, For a New version of this sku use Item #: 122859, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202053) $410.01

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.10

Clutch Release Shaft - For tractor models 1200, 135, 135UK, 148, 165, 168, 175, 178, 178UK, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 290, 298, 30B, 30D, 30E, 30H, 35, 35X, 375E, 390E, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65, TO35, MH50. This Shaft is 1 inch diameter X 3 19/32 inches long. (Item #: 165437, Ref: 180449M1) $8.30

Clutch Release Shaft - For tractor models FE35, TO35, 165, 180, 20F, 240, 250, 270, 275 UK, 290 UK, 35, 40E, 50, 50E, 65. This shaft is 1 inch diameter x 5 17/32 inches long. Also replaces 1679460M1. (Item #: 166103, Ref: 180444M2) $14.60

PTO Disc, 9 Inch - 10 spline on 1.750 inch hub. For tractor models 135 dual, 165 dual, 175 dual, 180, 20 dual, 202 dual, 203 dual, 204, 2135 dual, 2165 dual, 2200 dual, 30, 302 dual, 30B dual, 3165 dual, 35 dual, 50, 65, F40 dual, TO35 dual. Replaces 1753753M91, 1753753M92, 1753753M93, 1753753M94, 3620411M91, 3620411V91 (Item #: 113815, Ref: 1753753M94) $41.10

PTO Disc, 9.055 - 9.055 inch rigid disc, organic, spline diameter 1.75 inch 10 spline. For tractor models 130, 135, 165, 175, 180, 20, 202, 203, 2135, 2165, 2200, 245, 25, 255, 265, 290, 30, 302, 30B, 30D, 3165, 35, 40B, 50 serial number 515396 and up, 65, TO35 serial number 177395-177519 and 177538 and above. All with dual clutches. Replaces 1034195M1, 1539020C1, 1753753M1, 1753753M94, 1753753M94-A, 181102M92, 1851652M92, 323022046, 323022047, 3620411-RF, 3620411-RO, 3620411M1, 3620411M91, 392492R91, 709640R92, 899823M91. (Item #: 163114, Ref: 323022047) $52.00

Pilot Bearing - Clutch pilot bearing, heavy-duty, long lasting stainless steel. Bore: 0.670 inches (17mm), OD: 1.57 inches (39.88mm), 0.470 inches width. For tractors: MF50, MF65, MF85, MF88, MF235, MF245, MF255, MF285, MF1080 industrials: 20, 20C, 30, 30B, 31, 35 utility and turf, 40, 40B, 50, 50A, 50C, 202, 203, 204, 205, 302, 304, 2135, 2200. Replaces 832953M3, 1440487X1, 828123M1, 828123M2, 832960M3 (Item #: 107933, Ref: C5NN7600A) $3.40

Pilot Bearing - This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 375, 382, 390, 390T, 398, 399, 40, 40B, 40D, 40E, MH44, 50, MH50, 500, 50A, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 675, 690, 698, 698T, 699, 85, 88, F40, FE35, Super 90, TE20. Replaces OEM part number 828123M2. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate Assembly, Remanufactured - For Massey Ferguson tractor models TO30, TO35, 35, 50, 65, 135, 150, 202, 203, 302, 304, 2135, 2200, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 10, Pressure Plate Type: Dual Stage, (Item #: 206883) $240.01

Pressure Plate Assembly, Remanufactured, 184543M91 - For Massey Ferguson tractor models TO30, TO35, 35, 50, 65, 135, 150, 202, 203, 302, 304, 2135, 2200, Compatible with Massey Ferguson Construction and industrial models 40, Replaces Massey Ferguson OEM number 184543M91, 193931M92, 512356M91, 526665M91, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 10, Pressure Plate Type: Dual Stage, For a New version of this sku use Item #: 122859, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206884) $259.50

Pressure Plate, 11 Inch - For 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35 (Late production) (Item #: 182796, Ref: 1040884M1) $66.00

Release Bearing - Bearing, clutch release, 2.49 inch inside diameter, 4.10 inch outside diameter, 1.5265 inches wide. For single clutch tractors: TO35, MF35, F40, MF50, MF65, MF135 industrials: 2135, 3165. (A2336-37/A2336-147) For 2135, 3165, F40, MF135, MF35, MF50, MF65, TO35, 202, 203, 302, 304. Replaces 833085M1, 833085, 180505M2, N2336-147 (Item #: 168448, Ref: 833085M2) $173.94

Release Bearing - Release Bearing for Single and Dual Clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 350, 352, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 40, 40B, 40D, 40E, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 690, 698, 698T, 699, F40, TO35. Replaces original part numbers 195508M1, 892862M1, 892862M2 and 256179M1. (Item #: 112189, Ref: N1585) $23.50

Release Bearing Carrier - Carrier, for clutch release bearing. Carrier bore 2.130 inch (2-1/8 inch approximate); outside diameter 2.503 inch (2-1/2 inch). PLEASE CHECK CARRIER BORE BEFORE ORDERING. For single or dual clutch. Tractors: TO35, MF35, MF50, MF65. Industrials: 20, 202, 203, 302, 2135. Use with bearing 892862M2 for DUAL CLUTCH ONLY. This is the old style for retainers with bronze bushing. (Item #: 165363, Ref: 183129M2) $21.70

Release Lever - For tractor models 150, 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35. (Item #: 182186, Ref: 899818M2) $17.50

Cooling System

Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. Replaces 184528M1, 184528M91, 184528M1. Fits 135, 150, 165, 175, 180, 235, 240, 255, 35, 50, MH50, 65, 85, 88, TO20, TO30, TO35. (Item #: 112331, Ref: 180224M91) $6.60

Radiator Hose, Upper - 5 1/2 inches long and 1 1/2 inches diameter. For tractor models TE20, TO20, TO30, TO35, F40, (50, 65 with Continental Engine), (35, 50, with Perkins Diesel), (135 with Perkins Gas or Diesel), (230 serial number 243032 and up), (235 with Perkins Diesel), 20, 2135, 50, 2500 gas Z120, Z129, Z134. PLEASE NOTE: You may receive a longer piece up to 8 1/2 inches long and you can cut-to-fit. (Item #: 110453, Ref: 180085M1) $6.20

Thermostat - Thermostat. For Continental Gas Equipped tractors: 2200, 202, 204, 2135, 3165, F40, TO35, 50, 2500, 302, 304, 356, 135, 150, 165, 175, 180, 35, 65, 35, Colt, MH21, MH20, MH22, MH50. 160 degree. Comes with gasket. Replaces 830842M91, 836000V91, 836000M1, 830842M91, 830685M91, 184406V2, 181566M1 (Item #: 108422, Ref: 836000M91) $13.80

Decals and Emblems

Drive Train

Ball Bearing - Bearing, ball, for countershaft front. Also used for multi-power mainshaft front. Replaces 831469M1. For MF135, MF150, MF165, MF175, MF180, MF35, MF65, TO35 (Item #: 169628, Ref: 195507M1) $27.80

Bearing Cone - Cone (HM903249), for differential. For tractors: TO35 serial number 169467 and up, using sleeve 181251M93 MF35, MF65 serial number CL2686122 and up, MF165, MF180 using sleeve 190606M92 MF175, MF235, MF255, MF265, MF275. 1.750 inch bore, 1.125 inch bearing width. (Item #: 117943, Ref: 831888M1) $27.10

Bearing Cup - Double tapered cup (53376D) for differential. For tractors: TE20, TO20, TO30, TO35 prior to serial number 169467 MF35, MF50 using sleeve number 181251M91 also MF65 to serial number CL2686121 MF135, MF150, MF165, MF175, MF180. (Item #: 180440, Ref: 181251DTC) $329.00

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $27.10

Bearing Cup, Rear Axle, LH Inner - This Left Hand Bearing Cup measures 4.438 inch outside diameter and .938 inch width. Fits models 135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF50, MF65, TO20, TO30, TO35. (Item #: 116984, Ref: 195160M1) $18.30

Bearing Kit - Needle Bearing Kit. For transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions. (1) required. For tractors: TO35 serial number 171549 and up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Item #: 125327, Ref: 830735M91) $34.00

Bearing, Input Drive Shaft - Bearing, ball, input drive shaft. Inside diameter 1.574 inches, outside diameter 3.150 inches, width .709 inches. For tractor models TO35, MF35, 50, 65, 135, 150, 165, 175, 180. (Item #: 172367, Ref: 195505M1) $27.30

Bearing, Needle - Needle Bearing for countershaft. For 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 265 S (TR), 270, 275, 282, 283, 283 Brazilian, 285 (FR), 285 S (TR), 285 US Built, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 35X, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 40H, 415 Brazilian, 4215, 4220, 4225, 4235, 4245, 425 Brazilian, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 475 Brazilian, 481 Brazilian, 50, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 550, 560, 565, 575, 590, 592, 595, 60H, 60HX, 65, 65 US Built, 670, 675, 690, 698, 698T, 699, 765, 835, 865, Super 90, TO35, Massey Harris 50. Replaces 532883M1, 195453M1 (Item #: 167261, Ref: 195453M1) $9.60

Bearing, Needle - Needle Bearing, for power input pilot, multi-power. For MF135, MF150, MF165, MF175, MF180, MF35, MF65, TO35. 1 inch inside diameter, 1-5/16 inch outside diameter, 3/4 inch wide. (Item #: 116985, Ref: 195873M1) $19.50

Bearing, Pinion Pilot - For tractor models 135, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11 x 38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11 x 38 differential, 590 with 11 x 38 differential, 65, 675, 690 with 11 x 38 differential, 765, FE35. Replaces 191250M1, 191250V1, 196098M1 (Item #: 117942, Ref: 191250M1) $30.90

Countershaft - Countershaft, 6 speed transmission. 20/17/10 spline, 15 tooth, 12.750 inches long. For the following tractors: 135, 202, 203, 204, 205, 2135, 2200, 3165 35, 50, 65, FE135, MH50, TO35. (Item #: 173663, Ref: 183085M1) $194.41

Countershaft, Transmission, 17 Spline, 15 Teeth - Shaft is 12.25 inches long. For MultiPower Transmissions on: 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 235, 240, 245, 250, 255, 265, 270, 275, 285, 290, 298, 30, 35, 50, 550, 565, 575, 590, 65, 765, FE135, FE35. (Item #: 173274, Ref: 189391M92) $181.00

Coupling, Wheel - 5.00 inch long, 3 groove, 10 spline. For tractor models 135, 148, 150, 155, 158, 165, 168, 175, 178, 188, 202, 203, 204, 205, 2200, 35, 365, 50, 65, 765, F40, FE135, FE35. (Item #: 160182, Ref: 880069M2) $38.30

Detent Plunger - This Detent Plunger is used on; 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces original part numbers 180418M1 and 180418M2. (Item #: 169495, Ref: 180418M2) $4.60

Detent Plunger Spring - This Detent Plunger Spring is used with 180418M2 Detent Plunger. It is used on 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces 180417M1, 191221M1, 191221M2 (Item #: 165970, Ref: 180417M1) $1.90

Differential Bearing and Cup - Fits in Differential Lock. Bearing and cup is used on multiple Massey Ferguson Tractors. Replaces original part numbers: 1850087M91, 1850087M92, 1851533M91, 1851533V91, 185773M1, 185775M1, 185776M1, 1857775M1, 1857776M1, 195159M1, 195159V1, 195160M1, 195160V1, 300975M1. (Item #: 179801, Ref: 195159M1) $29.60

Differential Bearing and Cup - Bearing and cup set Fits multiple Massey Ferguson Models. (159x108x21mm) Replaces 1850849M91, 1850909M91, 185251M1, 185252M1, 185252V1, 3039248M1, 3039249M1 (Item #: 150360, Ref: 185251M1) $146.00

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 3/16 outside diameter and 0.053 inches thick. Used on 1080, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20C, 20D, 20F, 2135, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285, 290, 298, 30B, 30D, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 372, 375, 382, 390, 390T, 398, 399, 50, 550, 565, 575, 590, 595, 65, 675, 690, 698, 698T, 699, 85, 88, Super 90, TE20, TEA20, TED20, TEF20, TO20 Replaces OEM number 181247M1. (Item #: 173021, Ref: 181247M1) $11.50

Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 170391, Ref: 180445M1) $22.30

Gasket, Rear Axle Trumpet Housing - Size is approximately 15-1/4 inches. Fits TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 180, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 2500, 30, 31, 3165, 35, 40, 50, 50, 65. (Item #: 151916, Ref: 183254M1) $4.40

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $2.40

Gear Shift Boot - For tractor models TE20, TO20, TO30, TO35, 20, 35, 50, 65, 85, 88, Super 90, 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 285. Top Hole 1/2 inch. Bottom hole 1 1/2 inch. Replaces 180579M4, 180579M3, 108579M3, 520858M1, 237461 (Item #: 114031, Ref: 520858M1) $2.90

No
Picture
Gear Shift Knob - Round ball, 3/8 inch NF thread. For tractor models TO20, TE20, TEA20, TEF20, TO30, TO35, FE35, F40, 130, 135, 150, 165, 175, 20, 202, 203, 204, 205, 2135, 220, 2200, 2500, 30, 302, 303, 304, 30E, 3165, 320, 333, 35, 356, 40, 404, 406, 44, 444, 50, 50A, 50E, 555, 65, 85, 88, 90, Super 90, 95, 98, F40, FE135, MH50, TO35. (Item #: 150683, Ref: 180006M91) $3.90

Gear Shift Spring Retainer - This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Item #: 126687, Ref: 1861024M1) $13.30

Gear, 1st - This gear is 1st gear for 8 speed transmission. Replaces 520700M1, 183042M1. Gear has 44 teeth and is a 18 spline. For tractor models FE35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 203, 2135, 2200, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 3165, 360, 362, 375, 383, 390, 390T, 40, 40B, 50, 50C, 50D, 50E, 65, (20F, 40E, 50H ALL UK MODELS), 35 GAS/DIESEL, 282 MEX. (Item #: 151828, Ref: 1682688M1) $80.00

Gear, 2nd - This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Item #: 173295, Ref: 180419M1) $25.90

Gear, 2nd and 4th - This gear is 2nd and 4th, for an 8 speed transmission. Gear is 36 and 46 teeth, 18 spline. For tractor models FE35, MH50, 1080, 1085, MF11, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 202, 203, 204, 205, 230, 235, 240, 245, 250, 2500, 255, 265, 275, 283, 285, 290, 30, 31, 3165, 35, 40, 40B, 50C, 50D, 550, 565, 575, 590 (65, 765 ALL with MULTI POWER), FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 179620, Ref: 1682691M1) $142.00

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $27.10

Input Housing Shaft Seal - 1-1/8 inch inside diameter x 2-1/4 inch outside diameter. For tractor models (TO35, FE35 with single clutch), 135, 135 UK, 2135, 240, 3165, 65, MF35, MF50. (Item #: 178027, Ref: 195523M1) $4.80

Input Shaft Housing Gasket - For tractor models F40, FE35, TO35, 135, 135 UK, 2135, 240, 3165, 65, MF35, MF50, MH50. (Item #: 166860, Ref: 180434M1) $1.40

Layshaft Housing Gasket - This Layshaft Housing Gasket, also known as Bearing Housing Cap Gasket, is used on some 6 speed, Multi-power and 12 speed Syncromesh transmissions. It replaces OEM part numbers 1004633M1, 181237M1 (Item #: 169496, Ref: 181237M1) $1.50

Lock Nut, Pinion - Used on Massey Ferguson 133, 135, 140, 148, 165, 175, 178, 180, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, 35UK, 40, 4500, 50, 50A, 65, 6500. (Item #: 179636, Ref: 180456M1) $27.27

MAIN Shaft Bearing - Bearing, ball, for MAIN shaft (1 37/64 inch). For all single and dual clutch, 6-speed and multi-power models. Tractors: TO35, MF35, MH50, MF65, MF135, MF150, MF165. (Item #: 169639, Ref: 195502M2) $9.30

Main Drive Pinion Shaft Seal - Measures 1.125 inch x 1.562 inch x .250 inch. For tractor models 20, 20C, 202, 203, 2135, 30, 31, 3165, TO35, 135, 150, 165, 175, 230, 235, 245, 35, 50, 65. Replaces: 195501M1, 195870M1. (Item #: 165141, Ref: 195501M1) $4.70

Main Shaft Gear - Transmission Mainshaft Gear. Intermediate and high for regular transmission with serial number to 213313. 36/46 tooth, 18 spline. For the following tractors: 35, 50, 65, FE35, TO35. (Item #: 179610, Ref: 180416M1) $158.00

Mainshaft - 11.360 inches long. For tractor models (135, 150, 165, 202, 203, 2135, 3165 all with 6 speed transmission and narrow 1.560 inch planetary gear), (202 early production with standard transmission), (203 serial number up to 659001340 with standard transmission), (35 serial number CN13556 and up with standard transmission), (50, 65 all serial number CN13566 and up with regular transmission), (FE35 serial number 213314 and up with regular transmission). (Item #: 172289, Ref: 187168M1) $149.00

Mainshaft - 12.00 inches long. 4 Groove. For tractor models (150 early models with multipower transmission), (135 serial number up to 9A11664 with multipower transmission), (FE35, 50, 65 all with multipower transmission), (165 with multipower transmission and serial number prefix C). Replaces OEM part number 189440M1, 189441M1, M05-12-07. (Item #: 178378, Ref: 189440M1) $195.00

No
Picture
PTO Lift Pivot Shaft - For Massey Ferguson tractor models F40, TO35, 35, 35 (France), 35X (France), 50, 50 (Harris and Massey), 65, 135, 135 (UK), 150, 165, 165 (UK), 175, 175 (UK), 178 (UK), 180, 230, 231, 231S, 235, 240, 240 (S, Turkey), 245, 250, 255, 265, 265S (Turkey), 270, 271X, 271XE, 275, 275 (UK), 281, 281X, 281XE, 282, 283, 283 (UK), 283 (Brazil), 285, 285S (Turkey), 290, 290 (UK), 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 451, 461, 471, 481, 492, 543, 583, 596, 670, 690, 698, 699, 1080, 1085, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 898304M91, (Item #: 176229) $7.30

Pinion Nut Washer - Used on Massey Ferguson models: 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, FE35, 40, 4500, 50, 50A, 65, 6500, 765, 865 (Item #: 183834, Ref: 180455M1) $2.50

Planetary Thrust Washer - This Planetary Thrust Washer is for tractor models 135, 150, 165, 202, 203, 204, 205, 2135, 302, 304, 3165, 35, 356, 50, 65, 85, 88, Super 90, F40, FE35, TO35. (Item #: 172988, Ref: 180414M1) $16.10

Rear Drive Coupling - Drive coupling, differential, rear. For tractors: TO35, MF50, MF65 industrials: 202, 204 Work Bull, 203, 205, 356 Tractor shovel, 2200 Treever, 2135 utility. 5 inches long, 10 splines 1-1/4 inch and 2 inches long. Replaces 183088M1, 880069M1, 880069M2 (Item #: 160182, Ref: 183088M1) $38.30

Shift Fork, 1st, Reverse, 2nd and 3rd - For tractor models FE35, F40, MH50, TO35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 202, 203, 204, 205, 2135, 2200, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 30, 31, 3165, 35, 50, 65. (Item #: 151023, Ref: 180437M1) $38.00

Shift Lever Locking Pin - This Shift Lever Locking Pin is used on Ferguson, Massey Harris and Massey Ferguson applications. It replaces OEM part numbers 180581M2, 1678440M1, 180581M1 (Item #: 183009, Ref: 1678440M1) $1.10

Shift Rail, 1st and Reverse - Replaces: 180442M2. For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 231, 235240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 35, 40, 50, 65, F40, FE135, MH50, TO35 (Item #: 172890, Ref: 1678867M1) $47.00

Shift Rail, 2nd and 4th - Shift Rail, 2nd and 4th. Replaces 180438M2 For the following tractors: 135, 138, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11x38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11x38 differential, 590 with 11x38 differential, 65, 675, 690 with 11x38 differential, 765, FE35. (Item #: 172896, Ref: 1678866M1) $37.70

Side Cover Gasket - This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92. (Item #: 112236, Ref: 9N4131) $1.00

Transmission Mainshaft - For Regular Transmission with serial number to 213313. Shaft is 11.375 inches long, 18 spline. For the following tractors: 35, 50, 65, FE35, TO35. (Item #: 173091, Ref: 180441M1) $89.00

Electrical System

Alternator with Tach Drive - This is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. Tach drive is appropriate for gas tractors where the tach drive is on the generator. Use part number ADR9209 to make this a single wire self exciting alternator (not included). (Item #: 164228, Ref: ADR0382) $140.00

Coil, 12 Volt - This 12 Volt Coil has an internal resistor for tractor models Super 90, Super 95, TO35, 150, 165, 180, 202, 35, 410, 50, 65, 85, 88. (Item #: 105299, Ref: 189673M1) $17.00

Coil, Ignition 6V - Coil for Delco Distributor with clip held cap. For 202, 204, 20, 26, 27L, 27, 302, 303, 304, 34, 356, 35, 402, 404, 60, 70, 72, 80, 82, 90, 92, MF35, MF50, MF65, MF85, MF88, MH50, Super 92, Super 90, TO20, TO30, TO35. Replaces 1024481M91. (Item #: 105281, Ref: D4PE12029AA) $16.30

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. For models TO20, TO30, TO35, 35, 202, 204, 302, 304, 50, 65, 85, 88, Super 90. Replaces 811735 Delco and 1750411M1. (Item #: 104554, Ref: 1750411M91) $9.20

Distributor Dust Cover - Dust Cover for Delco Distributor with Clip Held Cap. For 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35. Replaces 1750491M91. (Item #: 103153, Ref: 1900119) $9.80

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. fits tractor models F40, 202, 204, 40, Super 90, 85, 88, TO20, TO30, TO35, 302, 304, 35, 50, 65, 95, 97 with one of the following Delco distributors: 1112557, 1112570, 1112585, 1111722, 1111737, 1111740, 1112583, 1112589. Replaces: washer: 1750412M1, bushing: 1750499M1, shim washer: 1750406M1, 1025008M1 (Item #: 178103, Ref: ABC3007) $29.30

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Massey Harris 92 Combine, Massey Harris 50. Ferguson F40, TO30, TO35, 202, 204, 302, 304, 356, 50, 65, 85, 88, 95, 97, Super 90, 35. Replaces: 1750513M1, 1750514M1, 1750520M1, 22303X, 353444XL, 354119X (Item #: 111468, Ref: 1904376) $14.50

Electronic Ignition Conversion Kit, 12 volt negative ground - Fits TO20, TO30, TO35, 50, MH50, 65 : - For TO20 with Continental Z120 engine and Delco distributor. TO30 with Continental Z129 engine and Delco 1111740 distributor, TO35 and MH50 with Continental. Z129 or Z134with Delco distibutor 1112557 or 1112570, TO35, 35 and 50 with Continental Z134 and a Delco 1112570, 1112585 or 1112385 distibutor, 65 with Continental G176 engine and a Delco 1112583 or 1112589 distributor. Also fits aftermarket ATL-55-1200. Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For counter clockwise distributors with clip type cap. For use on 12 volt negative ground system only. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. (Item #: 113775, Ref: 1143) $150.00

Electronic Ignition Conversion Kit, 6 volt positive ground - For TO20 with Continental Z120 engine and Delco distributor including Delco distributor 1112618. TO30 with Continental Z129 engine and Delco 1111740 distributor, TO35 and MH50, 50 with Continental. Z129 or Z134with Delco distibutor 1112557, 1111722 or 1112570, TO35, 35 and 50 with Continental Z134 and a Delco 1112570, 1112585 or 1112385 distibutor, 65 with Continental G176 engine and a Delco 1112583 or 1112589 distributor. Also fits aftermarket ATL-55-1200. Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For counter clockwise distributors with clip type cap. For use on 6 volt positive ground system only. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. (Item #: 113774, Ref: 1143P6) $171.00

Generator, 12 Volts - Lucas style replacement, 12 volt, pulley is not included. For tractor models: 135, 148, 155, 158, 165, 168, 175, 178, 185, 188, 35, 35X, 50, 65, FE35, TE20, TEA20, TED20, TEF20. Replaces K908882, 3049871R91, 81806433, ADN10001R, ADN10001, E27N10000, 2871170, 897104M92, 12871182, 37H8231, 22703, 22791, LRD101, 2871170, 2871182, 22703, 22791, LRD101, 897104R92, 897104T, 897104M92, 2871182 (Item #: 113578, Ref: R1192673) $151.00

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit For Delco distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. Fits 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35, 95, 97, F40, 202, 204, MH50. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1111740. (Item #: 103151, Ref: ATK1DCR) $10.50

Ignition Tune-Up Kit - For Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88, 202, 204, Fits models with Continental engines with Delco distributors with clip held cap, (Item #: 168708) $28.10

Neutral Safety Switch - This Neutral Safety Switch has blade type terminals. For tractors: MF240*, MF250*, MF253, MF282, MF283 except Brazil, MF298*, MF360, MF362, MF375, MF383, MF390, MF393, MF398, MF399 industrial: 40E*. *Optional with 3381094M1. Replaces 888501M2, 963417M2, 1012043M91, 1679 223M2, 1679223M1, 1679223M2, 3381094M1, 34198, 39121, 39855, 963417M2, SMB497. (Item #: 164579, Ref: 1679223M2) $22.00

Neutral Safety Switch - This Neutral Safety Switch is for bullet type terminal. Replaces 181140V94, 53208520, 181140M1, 181140M91, 181140M94, 181140M93, 181140M92. (Item #: 111507, Ref: 181140M94) $11.80

Rotor - Used with Delco distributor and clip held cap. For tractor models (35 up to serial number 245033), (50 up to serial number 536249), (65 up to serial number 702826), TO20, TO30, TO35. (Item #: 110177, Ref: 1750498M1) $3.80

Rotor - Used with Delco distributors1112577, 1112570, 1112585, 1112591, and 1112598 with a clip held cap. For tractor models: 35 (up to serial number 245033), 50 (up to serial number 536249), 65 (up to serial number 702826), 85, 88, Super 90, 97. Replaces 1750498M1 and 1750785M1. (Item #: 110177, Ref: 1750498M1) $3.80

Solenoid Switch - Solenoid Switch, 12-volt. Three Post. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. For tractors: TO35, F40, MF35, MF50, MF65, MF85, MF90 Industrials: 202, 204, 302, 304, 256 utility gas and LP models. Replaces 182696M91, 182696M1. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.20

Solenoid, Starter - For Massey Ferguson tractor models TO35, 35, 35 (Turf and Utility), 35 (Government (655 Series)), 50, 65, 85, 88, 205, 300 (S), 302, 304, 350 (SS), Compatible with Massey Ferguson Construction and industrial models 200, 202, Compatible with Massey Ferguson Lawn and Garden (s) 10, 12 Replaces Massey Ferguson OEM number 182696M91, 182696M1, , Compatible with Massey Harris tractor models 50, Fender or firewall mount, Fits Massey Ferguson tractor models 205-4, 400SST, 500SST, 500 Special, Super 90, Fits Massey Ferguson Lawn and Garden (s) 7, 8, 8E, 14, , (Item #: 168108) $37.50

Spark Plug - Spark Plug 18MM Thread Diameter fits Continental Gas Engines in: TO20, TO30, TO35, 50, 65, 85, 88, S90, 135, 150, 165, 175, 180, 1100, 230, 235. Gas Industrials: MF35 Utility and turf, 202, 204, 302, 304. Massey Harris: Pony, 21, 22, 23, 30, 33, 44, 44-6, 44 Special, 101Jr. 333, 444, 555, 303, 402, 404. Replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs. (Item #: 111742, Ref: AL386) $3.20

No
Picture
Starter - Delco Style (4145), Remanufactured, Delco Remy, 1107654, 182454M92 - For Massey Ferguson tractor models TO35, 35, 65, Compatible with Massey Ferguson Construction and industrial models 50, 202, 204, Replaces Massey Ferguson OEM number 182454M92, 1900347M91, 182454M91, Replaces Delco Remy manufacturer number 1107654, Replaces manufacturer number 4145, 140-026, 91-01-4708, Delco Style, Voltage: 12, Rotation: Clockwise, Teeth: 9, (Item #: 203436) $440.01

Starter Drive - Drive Assembly attaches with keyway and set screws. For tractors: TO20, TO30, TO35, 50, MH50, 35, 65, F40, 202, 203. Services Delco Starters 1107755, 1107654, 1109457. NOTE: Please check the starter that is in your tractor, some starters use a pin to attach drive not a set screw. (Item #: 113968, Ref: 1035335M91) $33.90

Starter Nose Cone - VERIFY BOLT PATTERN - THIS NOSE CONE USES 2 BOLTS TO MOUNT TO THE STARTER BODY. If you have a 4 bolt, we do not have a replacement. Can fit OEM starter part number: 182454M92/1107654. For tractor models TO20, TO30, TO35, F40, MH50, 50, 65, Early 302, 304, 356. Replaces Delco number 1934316. Will NOT fit 4858MFGXL aftermarket starter. (Item #: 111739, Ref: 1751902M91) $45.10

Starter Solenoid - Solenoid Assembly, flange mounting to starter. Replaces Delco 1114356 on starters 1108649, 1107503, 1107512, 1108649. Gas and diesel applications. 12-volt. Replaces 1025381M91, 1047083M91, 1755027M91. (Item #: 105675, Ref: 1047083M91) $17.10

Starter Switch - Switch Assembly with key, for ignition and light. Switch has 3 terminals. For GAS tractors: TE20, TEA20, TO20, TO30, TO35, MF35, MF50, MF65, 202, 203, 204, 205. (Item #: 111516, Ref: 180681M93) $15.30

Starter Switch - For tractor models Super 90, 135, 165, 50, 65), 35 Gas and Perkins Diesel, TO35 Gas and Standard Diesel. Starter Switch. 4 prong. Includes 2 keys. This is a three position switch, heat, operate, start. - LUCAS Equipment. Replaces 35630, 883920M1, 967570M4, 504809M91, 963416M1, 883928M1, 883928M91, 417402M1, 2846124 (Item #: 111515, Ref: 883928M1) $10.10

Starter, 12 Volt - This new 12 volt starter with drive is for tractor models TO20, TO30, 35, 50, 65, 202, 204, 302, 356, TO35. Verify number off old starter. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 InchES), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Replaces the Delco number 1107226 and the original equipment numbers: 181541M91, 1109457, 182454M92, 1107654, 190004M91, 1107226 and TISCO starters 7877-EX, 81271-EX, 85451-EX, 4858MFGXL_12V, and 1900348M91. (Item #: 160371, Ref: 1107226) $235.00

Starter, 6 Volt ONLY, Continental GAS Engine - STARTER ASSEMBLY FOR 6 VOLT SYSTEMS ONLY with Continental Gas engine. For TO20, TO30, TO35, F40, MH50, 50, 65, Early 302, 304, 356. Has 9 tooth gear on bendix. Single bolted stud on rear side of starter (about 2 inches from the end) for electrical connection. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 Inches), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Can replace OEM starter numbers 181541M91, 1109457, 182454M92, 1107654, 190004M91, 1107226 and TISCO starters 7877-EX, 81271-EX, 85451-EX. 1 YEAR warranty. Measurement from the outer bolt flange to the end of nose cone is 3.274 inches. (Item #: 111068, Ref: 4858MFGXL) $159.00

Starter, Rebuilt 12 Volt - This remanufactured 12 volt starter has 9 tooth gear on bendix. Single bolted stud on rear side of starter (about 2 inches from the end) for electrical connection. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 InchES), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Replaces 1900347M91, 1900348M91, 4858MFGXL. A refundable $80.00 core charge will be added to your order. (Item #: 203430, Ref: TS-1126) $332.46

Switch, Lamp and Horn - Lucas type. Used on 135, 148, 165, 168, 175, 178, 185, 188, 230, 235, 240, 245, 250, 255, 265, 275, 290, 298, 35, 35 Gas / 35 Petrol, 35X, 375E Brazilian, 390E Brazilian, 50, 50E, 50EX, 565, 575, 590, 65, 765. Replaces 882283M1, 54033364, 34952 (Item #: 124742, Ref: 1502378C1) $17.50

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 189158M1, 189158M91, 767828M91. (Item #: 121141, Ref: R7994) $13.80

Switch, Push Button - Fits multiple Massey Ferguson tractors. Replaces 189158M91, 189158V91, 181141M91. (Item #: 105703, Ref: 189158M91) $10.40

Tune-up Kit, Comprehensive - For Delco distributor with clip-held cap. For 4-cylinder gas engine, kit includes: AL 386 spark plugs, plug wires, points, condenser, rotor, distributor cap. Fits tractors: TO20, TO30, TO35, 35 Ag. before serial number 245033, 35 Utility before serial number 655001052, 35 Turf before serial number 65600452, 85, 88, 90 Super, MH and 50 before serial number 536249, 65 before serial number 702825, 202 Ind. Before serial number 308962, 204 Ind. Before serial number 343688, 302 Ind. Before serial number 119750053, 356 Ind. Before serial number 570001025, Swathers 34, 44. Combines 92, Super 92. (Item #: 158888, Ref: MFTUNEKIT) $55.00

Tune-up Kit, With Plugs - This Tune-up Kit is for Clip held Cap Delco Distributors, 4 cylinder gas models and includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For models TO20, TO30, TO35, (MF35 with serial number prior to 245033), (MH50 with serial number Prior to 536249), (MF50 with serial nunber prior to 536249), (MF65 with serial number prior to 702825), MF85, MF88, MF90 Super, (35 Utility with serial number prior to 655001052), (35 Turf with serial number prior to 656000452), (202 with serial number prior to 308962), (204 with serial number prior to 343688), (302 with serial number prior to 119700082), (304 with serial number prior to 119750053), (356 with serial number prior to 570001025), Super 92. Verify correct spark plug size and type (Item #: 173738, Ref: MFITK10) $27.30

Voltage Regulator, 12 Volt - 12 Volt - 4 Terminal - Flat Mount. 4 Terminal: Light - Battery - Field - Armature (underneath base). Fits TO35, MF25, F40, MF35, MF50, MF65, MF85, MF88, MF Super 90, MF135, MF150, MF165, MF175, MF180, MF202, MF204, MF203, MF205, MF2135, MF3165. Combines SP300, SP410, SP510. 12 Volt models with generators. The Three Post side of this regulator may be parallel or slightly splayed. (Item #: 105581, Ref: 182548M92) $26.50

Engine Bearings

Thrust Washer Set - 4 Pieces - FOR AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 107167, Ref: 31137211_21) $6.90

Thrust Washer Set - 4 Pieces - Tabbed. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50.735113M1 (Item #: 107167, Ref: 31137211_21) $6.90

Engine Gaskets

Crank Seal, Rear - Lip-Type. Fits Four Cylinder Continental Engines. For 135, 202, 204, F40, MF135, MF150, MF165, MF35, MF50, MF65, MH50, TE20, TO20, TO30, TO35. (Item #: 106079, Ref: 1750216M92) $11.20

Crankshaft Seal, Rear Rope Type, Perkins - Sold individually - requires 2. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, 356, MF65, 300, 302, 304, 3165, MF165, 30, 40B, 50, MF255. (Item #: 107228, Ref: 735866M1) $2.90

Crankshaft seal, Front Lip Type, Perkins - Fits 152 CID 3 cylinder or 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203 and 205 to serial number 659002115, 35, FE35, MF35, MF50, 2135, MF235 engine serial number ending in D, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, 40B, 50, MF165, MF255. (Item #: 107221, Ref: 1851747M1) $9.60

Engine Rebuild Kits

Engine Parts

Crankshaft Pulley - For tractor models TO35, MF35, MH50, MF50, 65, 202, 204 with Continental Engine. 4 hole, spoked pulley with 7/16 inch holes, 2 3/4 inch center to center hole spacing. (Item #: 164737, Ref: 1750076M1) $100.00

Crankshaft Pulley, 3-Hole - For Perkins Engines. Fits Massey Ferguson Forklifts: 2500 and 4500. Massey Ferguson Industrial: 20 (Gas Engine serial number <152UA22587A, All Diesels), 20C (Diesel) 20D, 20F, 203 (Diesel), 205 (Diesel), 2135 (Utility), 2200, 30B (Diesel), 30D, 30E, 30H, 40 (Gas Engine serial number <152UA22587A, All Diesels), 40E, Tractors: TO35 (Equipped with 102 Loader), 135 (Gas Engine serial number <152UA22587A, All Diesel), 150 (Gas Engine serial number <152UA22587A, All Diesel), 230, 235 (Orchard), 245 (Orchard), 35 (Diesel), 35X (FE) (Diesel), 50 (Diesel), 65 (Engine serial nubmer <2820092). Uses 704812M93 hydraulic adapter plate. Replaces 31147784. (Item #: 118287, Ref: 734628M1) $78.00

No
Picture
Epicyclic Carrier Assembly - For Massey Ferguson tractor models TO35, 35X (FE, s/n 383154-earlier), 40, 65, Compatible with Massey Ferguson Construction and industrial models 765, Replaces Massey Ferguson OEM number 827719M91, (Item #: 170921) $292.00

Flywheel Plate - For tractor models 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35 (Item #: 173138, Ref: 1040886M1) $73.24

Ring Gear, Flywheel - This ring gear is for models TE20, TO20, TO30, TO35, 35, 50, 65, 135, 150, 165, 175, 180, all with Continental Gas Engine. Flywheel Ring Gear with 145 teeth measures 14.685 outside diameter and 13.680 inside diameter and 1/2 inch thick. (Item #: 101976, Ref: 1750034M1) $47.10

Shift Rail, 1st and Reverse, Used - For Massey Ferguson tractor models TO35, 35, 50, 65, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 431, 451, 471, 481, 543, 583, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 180442M2, For a new version of this item use Item #: 172890, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460983) $24.76

Transmission Gear, Used - For Massey Ferguson tractor models F40, TO35, 35, 35X (FE), 50, 65, 135, 135 (FE), 148, 150, 155, 165, 168, 175, 178, 185, 188, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 431, 451, 471, 481, 543, 565, 575, 583, 590, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 11, 20, 20C, 20D, 20F, 30, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 204, 205, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 180419M1, Splines: 17, Teeth: 23, 8 Speed Transmission, For a new version of this item use Item #: 173295, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460714) $15.01

Valve Spring Retainer, Perkins Diesel - Fits 152 CID and 203 CID perkins engines. For tractor models 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. Price shown is for each, sold only in multiples of 2 items. (Note: 2 halves = 1 retainer) (Item #: 180600, Ref: 731959M1) $4.90

Valve, Exhaust - Exhaust valve for engines 152, 203 or 305 CID diesel in models 203, 205, 35, 356, FE35, MF35, MF50, MF65, Super 92. (Item #: 166347, Ref: 731152M1) $5.90

Valve, Intake - Intake valve for 152 or 203 CID diesel standard bore 3.6 inch, injectors vertical in head. For 203, 205, 35, 356, FE35, MF35, MF50, MF65, Super 92. (Item #: 167112, Ref: 731151M1) $4.71

Engine Pistons and Sleeves

Piston Sleeve, Perkins 152 and 203 Gas or Diesel - Sleeve, CAST, replacing original CAST sleeve 734175M1, flange thickness .150 inch. Fits 152 CID 3 Cylinder and 203 CID 4 Cylinder Gas or Diesel Engines 3.6 inch standard bore. For tractor models 2500, 20, 40, MF135, MF150, 35, 203, 205, FE35, MF35, MF50, 200, 2244, 2200, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, MF255, 40B, 50. (Item #: 128601, Ref: 739043M1) $22.50

No
Picture
Piston, Flat Head, Perkins 152 or 203 Diesel - Piston with pin, flat head. For 152 or 203 CID Perkins Diesel Engines (standard 3.6 inch bore) in TRACTORS: 203, 205, 356, 35, FE35, MF35, MF50, MF65, Super 92. (Item #: 128657, Ref: 734460M91) $31.80

Sleeve Seals, Pack of 2 - Pack of 2. O-ring for Piston Liner Sleeve. (NOTE: Sleeves usually use a minimum of 2 O-rings each). Use on Ferguson, Massey Harris and Massey Ferguson tractors with Z120, Z129, Z134, Z145, and G176 engines. Replaces 1750000M1 (Item #: 128575, Ref: 1750000M1) $9.20

No
Picture
Sleeve, Perkins 152 or 203 Diesel - Sleeve, CAST, for replacing original CHROME sleeve. Flange thickness .040 inch, standard bore 3.6 inch. For 203, 205, 356, 35, FE35, MF35, MF50, MF65, Super 92. (Item #: 128654, Ref: 732638M-CST) $34.60

Engine Rings

No
Picture
Piston Ring Set, 1 Cylinder, Perkins 152 or 203 Diesel - 152 or 203 CID diesel engine standard bore 3.6 inch. Ring set, for 1 piston, used with CAST sleeves only. For 20, 200, 200B, 203, 205, 2135, 2200, 2244, 2500, 30, 300, 302, 304, 3165, 35, 356, 40, 40B, 4500, 50, FE35, MF135, MF150, MF165, MF230, MF235, MF250, MF255, MF35, MF50, MF65, Super 92. Set includes 2 at 3/32 inch, 1 at 1/8 inch, 2 at 1/4 inch. (Item #: 120667, Ref: 836325M91) $12.90

Exhaust System

Vertical Muffler Pipe to Manifold Gasket - Exhaust Elbow Gasket. For tractor models TE20, TO20, TO30, TO35, 135, 150, 35, 50, 65, 230, 235, 245, 20, 202, 203, 204, 205, 20C, 2135, 30B, 30D. Also Replaces OEM number 827877M1, 180104M1, 4222475M1, 72080353. Priced each. (Item #: 101628, Ref: 3640488M1) $2.00

Fuel System / Air Intake

Choke Knob - For Massey Ferguson tractor models TO20, TO30, TO35, 35, 40, 50, 65, 85, 88 Replaces Massey Ferguson OEM number 193346M1, 180708M1, , Compatible with Massey Harris tractor models 50, Replaces OEM number TO9703, (Item #: 126115) $12.50

Fuel Cap - This fuel cap may come bare metal or painted red. NOTE: EXTERNAL LOCK TABS. Used on Massey Ferguson 158, 20, 20B, 20D, 20E, 20F, 30D, 30E, 30H, 40, 40E, 50B, 50D, 50E, 50F, 50H, 60H, 6500H (FORK LIFT), 6800 (FORK LIFT), 1080, 135, 135 UK, 148, 155, 165 UK, 168, 175 UK, 178, 185, 188, 231, 240, 240P, 250, 253, 260, 261, 270, 275 UK, 283, 290, 298, 35, 35X (FE), 50, 550 UK, 560, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699. Replaces 1077576M1, 1666439M91, 1698042M91, 1876534M91, 1876534V91, 3762586M92, 3762586M93, 828583M91, ATJ3092, 001584U91, 1103177 (Item #: 153639, Ref: 1876534M1) $13.60

Fuel Cap, Vented - Fuel Cap INTERNAL LOCK TANGS 2.7 inch OD, 1.78 inch overall tab length, 0.250 inch tab width. This silver cap is for models: Pony, Pacer, TE20, TO20, TO30, 35, F40, 50, 65, 85, 88, 90, 135, 150, 165, 175, 1080, 1100, 1130, 1150, 1500, 1800, 202, 203, 204, 205, 302, 304, 356, 2135, 3165. Replaces 850493M1, YTO 520948M91. Verify OEM number to ensure fit. (Item #: 184806) $10.00

Fuel Filter - Fuel filter element, cartridge type. Comes with 3 o-rings. Overall length measures 3.504, outer diameter of 2.835, and inner diameter of 1.259 on both ends. Used in filter assembly 882272M91 (Purolator) Replaces 32327, 1850450M1, 1850 450M2, 1850450M2, 500764, 894974M91, P551167 and FF5364. (Item #: 172359, Ref: 1850450M2) $6.00

Fuel Filter - Measuring: inner diameter 5/8 inches, outside diameter 3 5/16 inches, length 2 3/4 inches, and 15/16 x 16 UN thread. Replaces 31938, 62594, 70460R91, 7111/44, 1012006M2. This filter is used on some Massey Ferguson tractors with large diameter cartridge filter. Massey Ferguson 2705, 35, 35FE, 50D Indust/Const, 65, 85, 88, TO35 (Item #: 182558, Ref: FF2102) $27.20

Fuel Line - For tractor models (165 UK, 50 with AD4.203 engine), (FE35, 35X all with A3.152 engine). Replaces 890324M93, 892130M92, 963213M1. (Item #: 173104, Ref: 892130M93) $18.10

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 180060M1. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.70

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. For the following models:TE20, TO20, TO30, TO35, F40, 35, 50, 65, 85, 88, Super 90 (all gas). Replaces 1001514M1. (Item #: 105382, Ref: 9N9162) $3.20

Fuel Shut Off - Fuel Shut Off Valve. For tractor models 165, 20D Indust/Const, 20E Indust/Const, 231, 240P, 255, 261, 2640, 30E Indust/Const, 35, 3505 Combine, 3525 Combine, 3545, 50 Loader, 65, 765, TE20, TEA20, TO20, TO30. 3/8 BSPT male thread to tank, 1/2 UNF female outlet. (Item #: 151838, Ref: 1851653M91) $10.80

Fuel Tank Cap - For Massey Ferguson tractor models Super 90, TE20, TEA20, TO20, TO30, TO35, 20, 35, 50, 65, 85, 88, 135, 150, 165, 175, 178, 180, 1080, 1100, 1130, 1150, Compatible with Massey Ferguson Combine (s) 300, 410, 510, 540, 550, 750, 760, 850, 855, 860, 865, Compatible with Massey Ferguson Construction and industrial models 30, 50A, 203, 205, 302, 304, 2135, 3165, Replaces Massey Ferguson OEM number 520948M91, 180144M91, 188716M93, (Item #: 154999) $7.70

Sediment Bowl Assembly - Strainer assembly, for GAS tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65, MF85, MF88 industrials: 35, 202 to serial number 309328, 204 to serial number 343891, 302 to serial number 119700213, 304 to serial number 119750210, 356 to serial number 670001084. The fuel bowl assembly has a 3/8 inch NPT male inlet and 1/4 inch pipe thread (7/16 -24) female outlet, 1-1/4 inch long bowl. Replaces OEM numbers 0236986, 180141V91, 193995M91, 193995M92, 193995V92, 180141M91, 632948M92. (Item #: 105381, Ref: 2NAA9155B) $16.00

Gauges

Ammeter - Measures 1.614 inch diameter. 30-0-30 black face with chrome bezel. For models: Super 90, TO35, 35, 50, 65, 85, 88. VERIFY HOLE SIZE AND NOTE GAUGE MAY OR MAY NOT HAVE "POWERLINE" PRINTED ON THE FACE OF THE GAUGE. (Item #: 172843, Ref: 180107M91) $28.30

Ammeter Assembly - Fits all TO and MF models using 30-0-30 amperes. Non-luminous, chrome bezel for 2 inch hole. Replaces 515521M91. (Item #: 121632, Ref: A0NN10670A) $6.60

Ammeter Black Ring - Fits all TO and MF models using 30-0-30 amperes. Black bezel for 2 inch hole. Replaces 515521M91. (Item #: 110410, Ref: A0NN10670A-BLAC) $10.70

Oil Pressure Gauge - 80 pound oil gauge. Fits TE20, TEA20, TO35, MF35, MF50, MF65, Massey Harris 44, 55 Series. For 2 inch hole. Replaces OEM number 506902M92. (Item #: 110411, Ref: FAD9273A) $15.00

Oil Pressure Gauge - For tractor models FE35, TEA20, 135, 148, 165, 168, 175, 178, 185, 188, 35, 65, 765, TO35 with STD. DIESEL ENGINES. (Item #: 104108, Ref: 1853097M91) $21.80

Proofmeter Drive Assembly - For a DELCO Alternators and Generators. This improved design uses a steel drive gear (originals used a fiber gear). Proofmeter Drive Assembly mounts on original type generator. Fits TO20, TO30, TO35, 35, 50, 65, 85, 88, Super 90, 135, 150, 175, 180, 1080, 1100, Industrials: 30, 31, 35 Turf and Utility, 50, 2135, 2200, 2500, 3165, 202, 204. ALL GAS ENGINES. Includes housing, 2 drive gears and gaskets. 7/8 - 18 threads. Does NOT include cable. (Item #: 113771, Ref: 1751295M91) $26.70

Tachometer Cable - 23 inches long, 7/8 inch drive end, 5/8 inch load end. Verify length. Replaces 1853233V1, 827855M1, 827855V1, 828033M92, 882539M91, 882539V91, 890232M91, 890460M91. (Item #: 104132, Ref: 41092S) $14.64

Tractormeter (Tachometer) - For TO35 with Continental Gas Engine (all years), Early MH50 and MF 50 with Continental Engine, 65 Continental Gas. Will also work on Massey Ferguson 35. Replaces 193966M91, 193967M91. (Item #: 104104, Ref: S.42754) $67.00

Water Temperature Gauge - This temperature gauge has a 72 inch Capillary tube, 2 inch Face Diameter, Chrome Ring. 180 degree normal temperature setting, 220 degree pegs top end. 5/8 inch UNF connector. TO20, TO30, TO35, FE35, F40, MH44, 50, 333, 444, 555, MF35, 50, 65, 85, 88, Super 90, 135, 165, 175, 178; ind. 20, 30, 31, 40, 50A, 70, 80, 202 Work Bull, 2200, 3165. Replaces: 1078125M91, 1079390M91, 180727M91, 180727M93, 182652M92, 1850512M94, 881396M91, 899455M91, 108727M93, 1078125M91, 0236708, 1078125M91, 180727M91, 180727M92, 180727M93, 881369M91, 899455M91 (Item #: 104116, Ref: 180727M91) $24.60

Hitch / Drawbar

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models TE20, TEA20, TO20, TO30, TO35, 20, 31, 35 (France), 35, 35X (France), 40, 50, 65, 130 (France), 135 (UK), 135, 150, 165 (UK), 165, 175 (UK), 175, 178 (UK), 180, 205, 230, 231, 231S, 235, 240 (S, Turkey), 240, 240P, 241, 245, 250, 253, 255, 261, 263, 265, 265S (S, Turkey), 270, 271, 275 (UK), 275, 281, 282, 283 (UK), 283, 285S (S, Turkey), 290 (UK), 290, 298, 302, 304, 360, 362, 365 (s/n: B18009-earlier), 375, 383, 390, 390T, 393, 394S (s/n: D03066-earlier), 396, 398, 399, 698, 2135, 2200, 3050, 3060, 3065, 3070, 3090, 3095, 3125 (France), 3125, 3140, 3165, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 202. Replaces Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Item #: 172986, Ref: C5NN594E) $9.10

No
Picture
Drawbar Pin - For Massey Ferguson tractor models TEA20, 35, 35X (FE), 65, 135, 165, 175, Replaces Massey Ferguson OEM number 824393M1, Replaces manufacturer number VPL4413, Used with drawbar 872149M1, (Item #: 174469) $10.70

Drawbar, Straight - For tractor models TO35, 135, 150, 165, 20, 30, 3165, 35, 50, 65. This drawbar is 35 3/4 inches OVERALL LENGTH, 2 inches WIDE, 1 1/8 inches THICK. (Item #: 160846, Ref: 184611M1) $58.00

Drawbar, Swinging - Swinging Drawbar is 35.75 inches in length, 2 inches wide, 1.125 inches thick. Also replaces 184611M1. Three 1.032 inch diameter holes at 1.25, 3.25, and 3.25 inches from front. For models:130, 135, 150, 165, 202, 205, 20C, 235, 245, 255, 265, 275, 30B, 35, 40B, 50, 65, TO35. (Item #: 110371, Ref: 531468M1) $86.00

Leveling Box Assembly - With hand crank adjusts from 19 inches to 24 inches. For tractor models 135 serial number 439191>, FE35, 150, 20, 20C, 203, 205, 2200, 230, 240, 245, 30, 65, FE135 COVENTRY, 2135 TURK, (20D, 20F, 250, 30B, 30D, 30E, 40B, 40E, ALL UK MODELS), 231 URSUS, (202, 204, ALL WORK BULL). Adjustment is 19 inches to 24.5 inches center to center hole. (Item #: 115661, Ref: 1660373M92) $63.00

Leveling Box Fork - A=5/8 inch, B= 3/4 inch, C= 11/16 inch, D=14-3/16 inch. For tractors: TE20, TO20, TO30, TO35, FE35, F40, MF35, MF135, MF150, MF65 (used in standard right hand assembly with 10-1/2 inch shaft), also left hand on MF65. (Item #: 110971, Ref: 184358M1) $28.50

Leveling Box Gear Housing - For tractor models 135, 148, 150, 165, 175, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 25, 250, 255, 265, 275, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 35, 40, 40B, 40E, 50, 65, 765, F40, FE135, FE35, TE20, TEA20, TO35. (Item #: 182821, Ref: 193181M1) $42.20

Pin - Pivot Pin. For swinging drawbar. 1 inch outside diameter by 1-7/8 inch working length. Not for swinging drawbar kit SDA6 which requires part number Pt3, 7/8 inch diameter pin. Fits original swinging drawbar 184611M1. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF230, MF235, MF245, MF255 industrials: MF20C, MF30B, MF40B, MF3165. For MF165, MF65. (Item #: 155129, Ref: 184630M1) $7.70

Retaining Clip Ring - For Massey Ferguson tractor models TE20, TEA20, 35, 35X, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 461, 543, 575, 590, 675, 690, 698, 699, 3050, 3060, 3070, 3080, 3090, 3095, 3140, Compatible with Massey Ferguson Combine (s) 550, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 193092M1, (Item #: 173702) $3.61

Top Link Pin, Hinged - Hinged Top Link Pin. Category I, hinged upper hitch pin assembly 3/4 inch diameter, 9-5/8 inch useable Length. For tractors: TO35, MF35, F40, MF50, MF65. For MF135, MF150, MF35, MF50, TO35 and others. Replaces 180901M91, 180901M1 (Item #: 173190, Ref: 180901M91) $5.60

Hydraulic System

Cover Cap - For 1080, 1085, 130, 135, 150, 165, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 40, 50, 65, 85, MH50, TO35. Hydraulic Cover Cap, 2 bolt. Replaces 180908M1, 520933M91, 182373M91, 190809M1 (Item #: 167498, Ref: 180908M1) $20.00

Dipstick - Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1. (Item #: 111829, Ref: 193400M1) $10.70

Draft Control Plunger Spring - For tractor models 1080, 135, 150, 165, 175, 180, 202, 205, 20C, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30E, 3165, 35, 360, 362, 375, 392, 40, 40B, 40E, 50C, 50D, 50E, 65, 670, F40, MH50, TO35, TO30, TO20, TE20. Hydraulic Spring. Replaces 182582V1, 180998M1, 182582M1, 182582M1 (Item #: 165989, Ref: 9N547B) $35.30

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.00

Dual Hydraulic Remote Valve Kit - This Dual Hydraulic Remote Valve Kit includes levers, hoses and Female couplers. Use with Pioneer 8010-4 series male plugs for the couplers (not included). Replaces Massey Ferguson part number 677421. (Item #: 168678, Ref: 677421) $440.00

Hydraulic Cylinder Stud Nut - Hydraulic Stud Nut is used with 899258M1 and 899257M1 Studs. It is 9/16 UNF Thread (Din 934). Replaces 368749X1 (Item #: 173194, Ref: 368749X1) $11.20

Hydraulic Cylinder Stud, 3 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 3 Inch Stud. Verify length before ordering. Replaces 1667579M1, 1667580M1, 1667580M2, 899258M1 (Item #: 173649, Ref: 899258M1) $7.70

Hydraulic Cylinder Stud, 4 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 4 Inch Stud. Verify length before ordering. Replaces 1667579M2, 1667579M1, 908934M1, 899257M1. (Item #: 173644, Ref: 899257M1) $5.30

Hydraulic Diverter Valve - Hydraulic Diverter Valve made for 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Verify the diagonal bolt pattern of the part in the picture as this only fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Item #: 161564, Ref: S.60032) $116.00

Hydraulic Filter Kit - This Kit contains 521451M1 filter, 185839M91 cap and 185555M1 bowl. It is used on Massey Ferguson models: 1080, 135, 145, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 2135, 245, 30, 31, 3165, 35, 35X, 40, 50, 65, FE35 (Item #: 184914, Ref: 185839M92) $27.40

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Pump - For tractor models (TO35 serial number 179304 and up), 35, (50 serial number 516837 and up), 65, 203, 205, 202, 203, 204, 231, 253, 302, 304. Valve Pushes Rearward. Replaces 183005M91, 184473M93, 184773M93. 10 spline w/1 3/8 inch diameter shaft. Horizontal safety valve. This pump is 7 3/4 inches wide, 5 1/2 inches high, 12 1/2 inches long. Shaft Length 6 1/2 inches. ***NOTE: various pumps were used on these models - verify configuration in picture. (Item #: 155591, Ref: 184473M93) $288.00

Hydraulic Pump Filter O-ring - This O-Ring is used with 185555M1 cap and Bowl Set. (Item #: 178156, Ref: 831907M1) $0.50

No
Picture
Hydraulic Pump Kit - For Massey Ferguson tractor models TO35, 35, 35X, 50, 65, 135, 150, 165, 175, Compatible with Massey Ferguson Construction and industrial models 202, 302, 304, 2135, Replaces Massey Ferguson OEM number 556601, Kit Contains: (2) Valve Chamber Assembly, (2) Piston, (1) Front Camblock, (1) Lift Block, (4) Piston Rings, (1) Seal Kit, (2) Repair Kit, (Item #: 174219) $196.00

No
Picture
Hydraulic Pump Piston Rings - For Massey Ferguson tractor models TO35 (s/n: 176304-later), 35 (s/n: 568747-later), 50 (s/n: 568747-later), 65, 135, 165, Replaces Massey Ferguson OEM number 892604M1, 190848M1, Inside Diameter: 21.5mm, Outside Diameter: 23.9mm, Width: 2.3mm, (Item #: 174693) $2.60

Hydraulic Pump Rear Cam Block, Used - For Massey Ferguson tractor models F40, TO35, 30, 31, 35, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 205, 230, 235, 240, 245, 250, 265, 275, 285, 290, 298, 350, 355, 365, 375, 390, 398, 399, 565, 575, 590, 595, 675, 690, 698, 699, 1080, 1085, 2135, Compatible with Massey Ferguson Combine(s) 40, 550, 765, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 204, 302, 304, 765, 2200, 2220, 3165, Replaces Massey Ferguson OEM number 894608M1, For a new version of this item use Item #: 113790, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460533) $13.26

Hydraulic Pump Support Peg - Hydraulic Support Peg has no shoulder on the pin. Verify type before ordering. If a stepped pin is needed, order part number 898643M1. This Pin use gasket 180904M1, sold separately. Replaces 180905M1 (Item #: 167221, Ref: 180905M1) $15.80

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.70

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.80

Hydraulic valve - This is a Single Hydraulic Remote Valve. It bolts to the lift cover in place of 180908M1 cap. (Item #: 166954, Ref: 12012002) $202.00

Lift Arm - For tractor models TE20, TEA20, TO20, TO30, FE35, F40, TO35, 130, 135, 202, 203, 204, 205, 2135, 25, 302, 304, 35, 65. Lift arm for both right hand/left hand side. Lift arm has a 1.80 inch inside diameter and 37 spline hole. (Item #: 114032, Ref: 180910M1) $54.00

Lift Arm - This Lift Arm is 2.25 inches with 42 splines. It is 2.125 inches on both ends. For tractor models 135, 150, 165, 202, 204, 2135, 302, 304, 35, 50, 65, F40, TO35. Replaces 180970M2, 180 970M2, 180970M3, 353720X1, 365334X1, 376374X1, 70918887 (Item #: 168806, Ref: 180970M2) $83.22

Lift Clevis - This lift clevis, has on the inside of the yoke, a multi-level face. If you need a smooth face on the inside of the yoke, this is not the correct part and we do not have what you need available. For tractor models 135UK, 165, 180, 20, 203, 205, 20C, 2135, 2200, 230, 235, 245, 30, 302, 304, 31, 3165, 35, 40, 50, F40, MH50, TO35. Hydraulic Lift Clevis. (Item #: 173304, Ref: 180972M2) $29.40

Lift Clevis Bushing RH - Right hand slotted bushing for rocker on draft control clevis. For 135, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 230, 245, 30, 302, 304, 31, 3165, 35, 40, 50, 65, F40, FE35, MH50, TO35. Replaces 181982M1, 180974M1 (Item #: 153600, Ref: 181982M1) $6.50

Lift Clevis Bushing, LH - Left hand slotted bushing for rocker on draft control clevis. For 135, 150, 165, 165UK, 175, 175UK, 185UK, 180, 20, 200, 202, 203, 204, 205, 20C, 20D, 2135, 2200, 230, 235, 240, 240S, 245, 265S, 271, 281, 285S, 30, 302, 304, 31, 3165, 35, 40, 50, 65, FE35, MH50, TO35. (Item #: 153601, Ref: 180974M1) $6.60

Lift Cover Gasket - For tractor models 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 202, 203, 204, 205, 20C, 20E, 20F, 2135, 2200, (230, 245, 265, 275 serial number 9A349239), 235, 2500, 255, 256, 282, 30, 302, 304, 30B, 30H, 31, 3165, 35, 40, 40B, 4500, 50, 50A, 50C, 50F, 60, 65, 6500, 6500H, F40, FE35, TO35. (Item #: 112052, Ref: 886549M2) $1.70

Lift Cylinder - For tractor models 202, 203, 204, 205, (35, 50, 65, FE35, all early), TO35. Hydraulic Rockshaft Cylinder has 3 inch diameter, is 7.937 inches long. Used with 184443M91 piston and (3) 184447M1 rings. NOTE: BOLT PATTERN IS 3 3/4" X 3 3/8" WITH 9/16" NF HOLES. THE HOLE SIZES WERE CHANGED BY MASSEY FERGUSON. THE COVER MUST BE REDRILLED AND STUDS CHANGED. REQUIRES (2) 899257M1 9/16"X3" STUD (2) 899258M1 9/16"X4" STUD (4) 368749X1 NUTS - We do not stock these items but they should be available locally. (Item #: 115763, Ref: 184442M1) $93.00

Lift Cylinder - 3 inch Lift Cylinder for tractor models 135, 150, 165 with Pressure Control, 202, 203, 204, 205, 2135, 302, 304 (Late 35, 50, 65, FE35). This cylinder originally came with 1/2 inch studs and then later models used 9/16 inch studs. This part comes made for 1/2 in studs. Verify which you have. This will replace the 9/16 diameter studs if you purchase studs and bushings. We do not supply the studs or bushings. (Item #: 115418, Ref: 190859M1) $101.00

Lift Cylinder Piston Ring, 3 Inch - Piston Ring for a 3 inch piston. For tractor models FE35, TO35 (serial number 179304 and above), 202, 203, 204, 205, 35, 35 Ind/Turf/Util, 50, 65, Early 135, 150, 165, 2135, 202, 204. Three are typically used. Sold individually. Replaces 184447M1, 53202383, 830741M1 (Item #: 111673, Ref: 184447M1) $4.50

Lift Cylinder Piston, 3 inch - Piston is 3 inch (piston ring is available separately, see part number 184447M1). For tractor models FE35, TO35 (serial number 179304 and above), 202, 203, 204, 205, 35, 35 Ind/Turf/Util, 50, 65, Early 135, 150, 165, 2135, 202, 204. (Item #: 112025, Ref: 184443M91) $37.00

Lift Piston Rod - For tractor models 135, 150, 165, 202, 203, 204, 205, 2135, 302, 304, 35, 50, 65, FE135, FE35. Lift piston rod is 7 3/4 inches. (Item #: 170854, Ref: 191211M1) $19.70

Lift Pump Cam Block, Front - This is the Lift Pump Cam Block, front, WITH LIP. For tractors: TO35, MF35, MF50, MF65, MF135, MF165, MF175, MF180. Replaces 894607M1. (Item #: 113791, Ref: 180924M2) $27.00

Lift Pump Cam Block, Rear - For tractors: TO35, MF35, MF50, MF65, MF135, MF165, MF175, MF180. Replaces 894608M1. (Item #: 113790, Ref: 180925M2) $27.00

Lift Pump Camshaft - For tractor models FE35, TO35, 135, 150, 165, 175, 202, 202, 204, 205, 302, 304, 3165, 35, 50, 65, 2135 TURF UTILITY NARROW. This camshaft has 10 spline and 1.3 Inch REAR SPLINE LENGTH. (Item #: 180715, Ref: 181993M91) $144.00

Lift Pump Cap Kit Bowl - For 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, FE135, FE35. Hydraulic Pump Cap Kit Bowl. Replaces 185839M1, 185555M1 (Item #: 178614, Ref: 185555M1) $12.10

Lift Pump Coupling - 10 spline coupling for models: 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, F40, FE135, FE35, MH50, TO35. (Item #: 173680, Ref: 180926M1_) $58.00

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Item #: 170928, Ref: 180979M2) $8.90

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 173508, Ref: 180933M1) $10.20

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.90

Lift Pump Overhaul Kit - Fits MF35, 65, 135, TO35, 150, 165, 175, 202, 2135, 302, 304, 50, 765. Repairs OEM Pump. Valve chamber has 5 holes on the sides of valve chambers. Hydraulic Pump Overhaul Kit contains (2) 184471M1, (2) 190799M1, 180924M2, 180925M2, (4) 8992604M1, 1810467M91, 556601 (Item #: 168716, Ref: S.40843) $226.21

Lift Pump Plug - For tractor models 135, 135UK, 150, 165, 165UK, 175, 175UK, 178, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 3165, 35, 40, 50, 65, TO35. Hudraulic Pump Plug. Used with 897491M1 Valve Chamber Assembly. (Item #: 180701, Ref: 181999M1) $6.20

Lift Pump Relief Valve - For tractor models FE35, 135, 20F, 231, 240, 240P, 253, 30E, 35, 350, 355, 365, 375, 390, 398, 399, 40E, 50E, 65, 765, FE135 COVENTRY. (2800 pound psi). (Item #: 170916, Ref: 828927M92) $20.90

Lift Pump Repair Kit - Hydraulic pump overhaul kit. Contains valve chamber assemblies, pistons, piston rings and cam blocks. Tractors: TO35 (serial number 179304 and up), MF35, MF50 (serial number 526837 and up), MF65, MF135, MF165 using 190799M1 .91 diameter piston. Hole sizes: (B) 3/8 inch 9.5mm; (C) 7/16 inch 11.1mm; (D) 15/32 inch 11.9mm. (Item #: 182670, Ref: HPOK3WCB) $182.00

Lift Pump VALVE CHAMBER Repair Kit - For tractors models TO35, MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180. Hydraulic Pump VALVE CHAMBER Repair Kit. Kit contains (4) 827718M1 rings, (1) o-ring kit, (4) 180928M1 springs, (4) 180930M1 outlet valves, (4) 180927M1 springs, (4) 180929M1 inlet valves. Contains valves, springs, snap rings and o-rings to repair all 4 chamber ports in one tractor. Services 180920M1 and 180921M1 body on early TO35. (Item #: 173170, Ref: 830997M1) $46.60

Lift Pump seal kit - For tractor models TO35, 135, 148, 165, 168, 175, 175S, 185, 188, 240, 250, 265, 290, 550, 565, 575, 590, 65, 675, 690, 698, 765, 595 WITH MK2. Replaces 894906M91. (Item #: 184402, Ref: 1810467M91) $5.70

Lift Shaft Bushing - Bushing is 2.36 inch outside diameter, 1.97 inch inside diameter, 1.39 inches long. For tractors: TE20, TEA20, TEF20, TO20, TO30, FE35, F40, TO35, MF35, MF50, MF65, MF135, MF150, MF165. For shaft 184359M2, 4 required. If Shaft 897567M3 is used, it requires bushing 1870934M1 not supplied. (Item #: 152601, Ref: 181018M1) $8.60

Lift Spring Plunger - For 35, 65, 765, FE35 all with Open Center Hydralics. Hydraulic Lift Spring Plunger. (Item #: 165198, Ref: 182580M1) $18.10

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

Quadrant Stop Kit - For tractor models TE20, TE35, TEA20, TO20, TO30, TO35, 35, 40, 50, 65, Massey Harris 50. Replaces: 825753M1. (Item #: 126615, Ref: 9N521) $8.30

Relief Valve - For tractor models TO35, 135, 150, 165, 175, 180, 235, 245, 255, 265, 2705, 2745, 35, 50, 66. (2750 psi) Replaces 884747M93, 884747M92, 884747M93, 883402M1, 40A63 (Item #: 163455, Ref: 883402M1) $18.50

Selector Valve - Converts MF hydraulic to external service (valve has 3/8 inch BSP thread in pressure ports) This 3 way selecter valve is designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. Provides a positive change over from tractor hyd. to external service. Does away with need to fix the tractor lift arm in the lower position when external service is in use. The 3 point linkage of the tractor can be free for use while the external service remains connected simply by operating the valve. Services lift arms plus three external ports w/ return going back to rear end. Ports can only be used one at a time. Designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. This is a replacement for the earlier VFD1103 (Item #: 161563, Ref: VFD1104) $158.00

Valve Chamber - For tractor models 135, 150, 165, 175, 202, 2135, 302, 304, 35, 50, 65, 765, FE35, TO35. Hydraulic Valve Chamber has .914 inch bore. Chamber only, does not come with valves. (Item #: 112582, Ref: 184471M1) $37.15

Lights

Bracket Set For lights - Fits rounded fenders. For tractor models TE20, TEA20, TO20, TO30, TO35, FE35, F40, MH50, MF50, 65, 85, 90, 135, 150, 165, 175, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 290, 298, IND 20, 20C, 20D, 30, 30B, 30D, 40B, 50C. Replaces 1750674M1, 52335M1, 523334M1. (Item #: 125324, Ref: 9N13471) $57.00

Clips, Bulb Retaining, (Pack of 4) - For tractor models F40, Super 90, TO20, TO30, TO35, 135, 150, 165, 35, 40, 5 0, 65, 85, 88, 98, MH22, MH23, MH33, MH44, MH44-6, MH50. 4 used per headlight (one pack) Replaces 1002808MI (sevicable), 1750642M1 (exactly like). (Item #: 126558, Ref: S.43070) $13.50

Headlight Bracket, Winged, Left - Winged Headlight Bracket for the left side. For TO20, TO30, 20, 30, 35, 40, 50, 65, 95. Replaces 510439M1. (Item #: 111699, Ref: 9N13473) $23.60

Headlight Bracket, Winged, Right - Headlight Winged Bracket for the right side. For TO20, TO30, 20, 30, 35, 40, 50, 65, 95. Replaces 510438M1. (Item #: 111600, Ref: 9N13472) $20.20

Headlight Washer - Used with light part number 164089AS. For the following tractors: TO20, TE20, TO30, TO35, 35, 40, 50, 65, 85, 135, TEA20-85, 150, 165, 175, 180, 770, 88, 90, Super 90, 97, 1080, 1085, 202, 1100, 1105, 203, 1130, 204, 235, 245, 255, 265, 275, 285, 30, 31 (Item #: 154899, Ref: 504781M1) $5.30

Headlight, 12 Volt - This is a serviceable 12 Volt headlight. It is 5-3/4 inch diameter, sealed beam bulb. Will work for left or right side. This light is not like the original. Will replace 505088M91, but is not the same. There is no visor. (Item #: 183739, Ref: S.66419) $56.00

Headlight, 6 Volt, RH or LH - Light is NOT an original replacement. For: TO20, TE20, TO30, TO35. Painted light grey. Will also function on MF20, Super 90, 135, 150, 165, 175, 202, 203, 204, 2135, 302, 304, 35, 65, 85, 88, 95, 97, 98 Replaces 186141M91, 186142M91, 510436M91, 510437M91. (Item #: 113349, Ref: 2N13005C) $52.00

Light Ring - This Light Ring has a 6-5/8 inch outside diameter. It comes with ground wire. Attaches with two screws (not included). Replaces original part numbers 752311M91, 1752311M91 (Item #: 185530, Ref: 1752311M91) $25.20

Sealed Beam Bulb - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Early fender mount for tractors: TO35, MH50, MF50, MF65 Inner or upper fender for tractors: MF150, 165, 175, 180, 1100, 1130. Fits various other models. (L4411). Replaces 1002803M91, 1509347M1, 1751347M91, 1752866M91, 181856M91, 189544M91. (Item #: 111241, Ref: 373662R91) $9.10

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $16.00

$Ferguson 65 Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. (Item #: 150699, Ref: TLBULB12V) $1.70

Tail Lite, License Light, Clear Glass Lens - For tractor models TE20, TO20, TO30, TO35, MF35, 40, 50, 65, 85, 90, 135, 202, 204, 205, MH50. Uses Gasket FAA13447A, not included. (Item #: 1750664M1) $21.36

Tail Lite, License Light, Lens Gasket - For tractor models TE20, TO20, TO30, TO35, MF35, 40, 50, 65, 85, 90, 135, 202, 204, 205, MH50.1750666M1 (Item #: 178109, Ref: FAA13447A) $2.40

Taillight Mounting Bracket - Exact of original. Manufactured in USA. (goes between tail light and fender bracket). Fits: TE20, TO20, TO30, TO35, 135, 202, 203, 204, 205, 65, 85, 90. Ferguson: 40, 50, 35. Replaces: 1750671M91, 1751824M91, 1751825M1. (Item #: 125325, Ref: 8N13423) $10.50

Oil System

Oil Filter - Measuring 4-3/16 inches in length, 3-15/32 inches outside diameter with a 0.525 center stud hole diameter, this cartridge type filter replaces OEM numbers 835817M91, 1014219M92, 1003879M91, 840751M91, 835817V91, 1014219M92, 15434A, 452050A, 761515M1, 8152AB, AT212, O8926AB, T16546, VT2427. Used in Continental Gas applications. (Item #: 111097, Ref: 835817M91) $11.00

Oil Filter Cartridge Type - For Perkins engines in models 135, 150, 165, 203, 205, 2135, 302, 304, 3165, 35, 50, 65, FE35. Replaces 1851766M1, 1883258M91, 1883258M92, 837595M91, 837595V91, 894975M91. This filter is (4 1/2 inches in length, 2 3/4 inch outside diameter, 3/4 inch inside diameter). (Item #: 126048, Ref: 837595M91) $7.00

PTO / Driveline

Bearing - Bearing, outer, for PTO Output Shaft (inside diameter 1.771 inch X outside diameter 2.952 inch x .629 inch thick) For tractors: TO30, TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175 late production, MF235 For tractors with dry brakes: MF255, MF265 to serial number 9A349239, MF275 to serial number 9A349239. For tractors using snap rings on bearing. (Item #: 172368, Ref: 195498M1) $34.30

Bearing, PTO Drive, Pinion - This PTO Drive Pinion Bearing is a ball bearing type for the PTO drive. For tractor models MF135, MF150, MF165, MF35, MF65, TO35. (Item #: 173341, Ref: 195494M1) $14.40

PTO Cap - For tractor models TO35, 135, 150, 165, 175, 180, 35, 40, 50, 65. Replaces 180313M1, 897268M1, 1868778M1 (Item #: 161741, Ref: 1868778M1) $25.30

PTO Disc - 5.039 inch outside diameter, 3.457 inch inside diameter, 57 internal teeth. For tractor models FE35, 20C, 30, 30E, 31, 35, 40B, 40E, 50, 50C, 50D, 50E, 65, 85, 88, 90, 135, 150, 165, 175, 180, 235, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 398, 670, 690, 698, 699, 1080, 1085, 1155, 4800, 4840. Replaces 190177M1, 533326M2, 1870879M1. (Item #: 114029, Ref: 1672626M1) $10.80

PTO Housing Retainer O-Ring - This O-Ring is 3/16 inch in diameter and has a 2-7/8 inch inside diameter. It replaces OE numbers 195522M1, 70923936, 81801571, C5NN533A (Item #: 173311, Ref: 195522M1) $0.90

PTO Main Drive Shaft, 19 teeth, 10 Spline - For the following tractors using Multi-Power Transmissions: 135 (serial number <9A11664), 150 and 165 (early), 35 and 50 (Transmission serial number CQ16563>), 65, FE135 (serial number 307136>), FE35. PTO Main Drive Shaft has 19 tooth gear and 10 spline shaft. (Item #: 173094, Ref: 191500M92) $204.00

PTO Retainer Housing - Retainer Housing, PTO Pinion Shaft, Multi-Power Transmission. Inside diameter of tube is 2.21 inches. Unit is less bearing and seal. For MF135, MF150, MF165, MF175, MF180, MF235, MF245, MF255, MF265, MF275, MF35, MF50, MF65, FE35. Note: If replacing old style housing that uses a bushing: seal number 1860867M3, bearing number 886668M1 and throw out bearing carrier number 886727M4 must be used also. (Item #: 110786, Ref: 1860889M91) $167.00

PTO Seal - PTO Shaft Oil Seal. 1-3/4 inch inside diameter, 2.685 inch outside diameter. For tractors: FE35, TO35, MF35, F40, MF50, MF65, MF135, MF150, MF165, MF175, MF180. For 20D, MF135, MF165, MF175, MF180, MF235, MF240, MF245, MF255, MF265, MF275, MF35, MF50, MF65, TO35. Replaces 1860325M1, 195506M1, 1077452M1. (Item #: 111984, Ref: 1860325M1) $7.60

PTO Seal - For 135, 150, 165, 175, 180, 20, 20C, 230, 235, 245, 30I, 31, 35, 50, 65, TO35. PTO Drive Shaft Seal. Measures 1.75 x 2.25 x.25 inches. (Item #: 152783, Ref: 195503M1) $3.90

PTO Seal Retainer Housing - This Seal Retainer Housing is used on many Massey Ferguson tractors. Uses 195522M1 o-ring, not included. Replaces part numbers 180465M1, 180465V1 (Item #: 151850, Ref: 180465M1) $22.80

PTO Shaft, 540 RPM - For F135, F35, F40, MH50, TO35, 135, 150, 165, 175, 180, 202, 203, 204, 205, 2135, 2200, 302, 304, 3165, 35, 50, 65 all with Live PTO, (20, 30, 31, 40, all Ind For Live PTO). PTO Shaft 540 RPM, 1 3/8 inch x 22.75 inches long, 10 drive splines, 1 snap ring groove. Replaces: 181204M92, 181204M91, 181204V92, 1812204M92, 1867084M91, M05-39-02. (Item #: 168169, Ref: 181204M92) $60.00

Seal - PTO Main Drive Shaft - For 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 290, 35, 50, 65, FE35. PTO Main Drive Shaft Seal. (Item #: 165440, Ref: 883935M1) $4.00

Shaft Bushing, PTO - For 135, 135UK, 150, 165, 165UK, 175, 175UK, 180, 20, 202, 203, 2135, 2200, 230, 235, 2500, 255, 265, 275, 30, 302, 31, 3165, 35, 35FE, 35X, 40, 4500, 50, 65, 6500, TO35. PTO Shaft Bushing. (Item #: 173076, Ref: 180461M1) $11.90

Seats

Bucket Style Base Cushion - Approx 19 inches wide x 15 inches deep x 5 inches thick. Has strap to secure bottom. For models: MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This seat cushion is GREY grained vinyl. (Item #: 101317, Ref: R1000) $54.00

Bucket Style Metal Pan Seat - Color may vary. Size is approximately 19 inches wide x 13 inches deep x 9-1/2 inches high. Fits Models: TE20, TEA20, TO20, TO30, TO35, MF50, MH50, MF35, 50, 65, 85, 88, 98, 135, 150, 165, 230, 235, 240, 245, 250, 265, 283, 333, 444, 555, 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 40, 40B, 50, 50A, 50C, 200, 2135, 2200, 3165. Uses cushion number R1001 and number R1000. (Item #: 113263, Ref: 181313M93) $75.00

Bucket Style Seat Back - Curved seat back measures approximately 16 inches wide x 4-1/2 inches tall x 2 inches deep. Has 2 mounting studs (on back) spaced approximately 9-1/4 inches apart. For tractor models MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This seat back is GREY grained vinyl. (Item #: 101318, Ref: R1001) $42.60

Bucket Style Seat and Backrest - Grey seat covered cushions, back and bottom with inlay as pictured. Contains part R1000 and R1001. For tractor models MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This kit contains: backrest assembly (part number 181324M1 inlay and 513353M91 cover), seat cushion assembly (part number 181326M1 inlay and 513351M91 cover). (Item #: 133469, Ref: FCX810) $94.00

Pan and Seat Cushion Set - Comes with black metal pan, black bottom cushion and black backrest cushion with metal plate and hardware. For tractor models: 135, 150, 165, 20, 20C, 20D, 2135, 2200, 235, 245, 265, 282, 283, 30, 30B, 30D, 30E, 3165, 35, 40, 40B, 50 LOADER, 50A, 50C, 555, 65, 85, 88, 98, TE20, TEA20, TO20, TO30, TO35. Replaces 181313M93, 181324M1. (Item #: 178546, Ref: 1210-1604) $156.00

Rubber Seat Bumper - This seat bumper is used with 181316M92 seat brackets. The measurements are 2 inches long, 1 inch wide, 1/2 inch thick. It includes 2 1/4 -�20 UNC screws. Replaces 181319M1, 32008AF, 354239X1, screw: 43142PF, bumper: 887074M1 (Item #: 115161, Ref: 887074M1) $8.20

Seat Bracket - This seat bracket is used on the bucket style seat part number 181313M93 and is for tractor models: TEA20, TE20, TO20, TO30, TO35, 35, 50, 65, 85, 88, 98, 135, 150, 230, 235, 240, 245, 250, 265, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 35 Turf and Utility, 40, 40B, 40E, 50, 50A, 50C, 202, 203, 204, 205, 2135, 2200, 3165. Replaces original part number 181316M92. (Item #: 155779, Ref: 181316M92) $82.00

Seat Bumper, Rubber - For use in a flip top pan seat (NOT a bucket seat), .957inch head diameter, .302 inch stem length, 1.283 inch overall length. For tractor models TO20, TO30, 35, 40, (50 up to serial number 514381), 65 diesel special, 135, 202, 204, 2135. Replaces TO434A. (Item #: 126664, Ref: 180289M1) $6.70

Seat Cushion - New Black Canvas Seat Fits Massey Ferguson 35, 20, 202, 203, 204, 205, 30, 40, F40, TE20, TO20, TO30, TO35, 130, 135, 150, 185, 230, 235, 250, 283, 50, 65, 85, 88, 95 Models Interchangeable with 1690046M91-1, 1753008M1 (Item #: 183821, Ref: 1753008M1) $74.00

Seat Cushion Set - Black seat cushion and backrest cover and inlay assembly. NOTE CUSHIONS MAY COME WITH WHITE PIPING. Consists of one MFCC13 and BR205. Fits later production MF235 and MF245 tractors with foam float seat. Replaces 181324M1, 181326M1, 513353M91. (Item #: 168734, Ref: FCX811) $123.00

Seat Hinge and Pins - This is the hinge and pin found on bracket part number 181316M92. It is used for attaching bucket seat part number 181313M93. It includes 181322M1 hinge link, 181321M1 pin (3/8 inch x 6-7/8 inch) and 181320M1 pin (3/8 inch x 7-5/16 inch). (Item #: 182977, Ref: 181322M1) $48.70

Sheet Metal / Body Parts

Fender - Less Toolbox - With ORIGINAL STYLE BRACKET. Fender comes with toolbox hole (NO TOOLBOX), must fit New/Used toolbox into fender, check fit before painting. For tractor models TO35, 35, Massey Harris 50, 50, 65, 135, 35 Ind., 2135, 202, 203, 204, 205. Replaces 180736M92. Add additional $150.00 to shipping due to weight. (Item #: 178722, Ref: S.43774) $323.00

Fender With Bracket - With NON-ORIGINAL TYPE BRACKET. Rear fender, dished type with mounting bracket, mounting bracket spot welded on. For tractors without roll-over protection structure. No tool box hole. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 except Orchard, MF150, MF165, MF175, MF230, MF235 except Vine and Orchard, MF245, MF255 with 16 inch rims, MF265 standard, MF275 standard, MF285 standard Industrials: 20 except Turf, 20C except Turf, 30 except Turf, 30B, 35 Utility, 40, 50, 50A, 202, 203, 204, 205, 2135 Utility, 3165 Utility, also these models with 4-post R.O.P.S., 30D, 40B, 50C. For MF1100, MF1105, MF1130. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104069, Ref: 8N16312) $102.00

Fender with Toolbox - Fender comes with toolbox, NOT assembled, must fit toolbox into fender, check fit before painting. For tractor models TO35, 35, Massey Harris 50, 50, 65, 135, 35 Ind., 2135, 202, 203, 204, 205. Replaces 180736M92. Additional $145.00 shipping due to weight. If you want 2nd matching fender without tool box hole, order S.66428. (Item #: 116087, Ref: S.43775) $332.00

Fender, Clamshell without Bracket - Fender Panel (Fender Skins) comes as pictured without bracket, dished type, made exactly like the original. Price is for one fender. For tractors without roll-over protection structure. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 exc. Orchard, MF85 standard, MF135 except Vine and Orchard, MF150, MF165, MF175, MF230, MF235. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 100026, Ref: 526904M1) $101.00

Hood, Dash and Grill Rubber Bumper - 1/2 inch outside diameter X 7/16 inches tall. For tractor models 20C, 20D, 20F, 30B, 30E, 30H, 40B, 40E, 50A, 50C, 50D, 50E, Super 90, TE20, TO20, TO30, 30, 31, 60, 65, 85, 88, 135, 150, 165, 175, 180, 202, 203, 204, 205, 230, 231, 235, 240, 245, 250, 255, 265, 302, 303, 404, 1080, 1100, 1130, 1150, 2135, 2200, 2640, 2675, 2705, 2745, 2775, 2805, 3165, 3505, 3525, 3545, 4500, 6500, MF 20, MF 25, MF 35, F40, MF (Ag and Ind): 40, 50, TO35. Replaces: 194768M1. (Item #: 163112, Ref: 180673M1) $2.80

Metal Toolbox, In-Fender Style - For tractor models: T035, MF35, 50, 135, Industrial 35, Utility 2135. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Also replaces S.60010. (Item #: 116980, Ref: 180737M1) $56.00

Steering

Power Steering Pump Filter - Measures 1.02 inches inside diameter, 2.99 inches outside diameter, 1.61 inches height. For tractor models 11, Pony, 16, Pacer, 175, 180, 20, 202, 204, 2135, 2155, 2200, 230, 235, 245, 30, 302, 303, 304, 30B, 30D, 3165, 333, 35, 4500, 50, 50D, 555, 555D, 55D, 55G, 55K, 55LP, 65, 85, 88, Colt, FE35, FE35X, 50, Mustang, Pacemaker, TO30. VERIFY MEASUREMENTS of old filter. Replaces 1008553M1, 1052262M91, EP3, P183. (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump with Reservoir - For tractor models MH50, TO35, 135, 202, 203, 204, 2135, 35, 40, 50, 65, (150 AG GAS (CONT ENG)GAS/DSL). Replaces part number 182493M92, 191277M91, 191423M92, 191426M91, 191486M91. Pump comes with internal relief valve. (Item #: 112571, Ref: 544443M91) $510.00

Seal, Power Steering Pump Driveshaft - For tractor models 135, 20, 200, 20C, 20D, 20E, 2135, 2200, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 35, 40, 4500, 50, MH50, 65, TO30. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.40

Spindle Nut - Castle Nut is 3/4 inch x 16 UNF. Replaces 353928X1, 376451X1. (Item #: 156038, Ref: 387930S36) $1.10

Spindle Thrust Bearing - This Spindle Thrust Bearing measures 1.250 inch inside diameter, 2-3/16 inch outside diameter, 5/8 inches deep. Replaces 195175M1. For tractor models 20, 2135, F40, FE35, MF135, MF150, MF165, MF230, MF235, MF245, MF35, MF50, MF65, TE20, TO20, TO30, TO35. (Item #: 102478, Ref: 18560X) $7.10

Steering Column Grommet - Verify Measurements: 1 3/8 inch inside diameter, 2 3/8 inch outside diameter. For tractor models TO35 (serial number 154616-204180), 25, F40, 50, 65, 85, 88, 90, 356, 10, 12, 14. (Item #: 126706, Ref: 180575M1) $15.00

Steering Sector Shaft Bushing - Replacing OEM number 1850018M1, 21910014, this bushing has an inside diameter of 1.252 inches and an outside diameter of 1.382 inches. Used on Massey Ferguson 135, 145, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20B, 20D, 20E, 230, 231, 235, 240, 245, 250, 30E, 35, 35X, FE35, 40, 65, 765. (Item #: 168937, Ref: 1850018M1) $10.40

Steering Wheel - For TO20, TO30, TO35, 35, 135, F40, 50, and 65. 17-3/4 inch diameter, 3/4 inch hub with 3/16 inch keyway. Covered Metal Spokes. (41486S) (Item #: 122474, Ref: 180576M1) $25.00

Steering Wheel - Original Type - For tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 135, 50, 65, 2135. 17-3/4 inch diameter, 3/4 inch hub with 11/16 inch keyway. Metal Spokes. (Item #: 101418, Ref: 180576M1-OE) $28.00

Steering Wheel Nut - Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5/8 - 18 NF thread. 1.132 inches tall. 1 inch wrench size. Replaces 207562, 70207562, 913133, 351103-S, 351103S, 751454R1, AL2315T, 195592M1 (Item #: 183746, Ref: 351103S) $9.00

Steering Wheel Washer - This steering wheel washer is 1.497 inch outside diameter, 0.645 inch inside diameter and is 0.180 inches thick. It is used on F40, TE20, TO20, TO30, TO35, 135, 35, 50, 65, 85, 88, 202, 204, 2135. Replaces 180577M1, 180577V1, TO3673. (Item #: 179684, Ref: 180577M1) $4.40

Wheel Hub - Front Wheel Hub. Six bolt. For the following tractors: 35, 50, 65, MH50, TE20 (serial number to 49998 and 52497-52565), TO30, TO35. Replaces 180338M91, 898085M91. (Item #: 133657, Ref: 180338M92) $33.90

Wheels

Dual Wheel Adapter - Measuring 2 3/4 inches over all length, with 9/16 UNF threads male and female sides, this adapter is used on Massey Ferguson 133, 135, 140, 148, 150, 20, 202, 204, 20C, 20D, 2135, 230, 231, 235, 240, 245, 30, 3165, 340, 342, 35, 35X, 50, 550, 65, 765, TE20, TEA20, TED20, TEF20, TO20. Replaces 818017M1 (Item #: 179639, Ref: 818017M1) $15.00

Front Lug Nut - Used on Ferguson and Massey Ferguson models 1100, 1130, 135, 148, 150, 165, 168, 175, 178, 180, 202 Indust/Const, 203 Indust/Const, 204 Indust/Const, 205, 20D Indust/Const, 20F Indust/Const, 2135 Indust/Const, 250, 253, 255, 263, 265S, 270, 271, 275, 281, 282, 283, 290, 30E Indust/Const, 30H Indust/Const, 3165 Indust/Const, 340, 342, 35, 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 399, 40E Indust/Const, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50 Loader, 565 Combine, 575 Skid Steer Loader, 590, 65, 670, 675, 690, 765, 85, 90, F40, TE20, TEA20, TO20, TO30, TO35, the nut has 1/2 inch - 20 thread and is 1-1/16 hex head. Replaces 195489M1, 195490M1, S9512A. (Item #: 112060, Ref: 195490M1) $2.30

Front Rim - 4.50" x 16", 6 bolt, 6" circle, 4-5/8" pilot, 5.50 or 6.00 x tire. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 535448M91, 506020M91, 195638M91.1883335M3 Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $72.00

Front Rim, 4.50 x 16 - Front wheel, with weight holes. 4.50 inch x 16 inch, 6-bolt, 6 inch bolt circle with 4.62 inch pilot for 5.50 inch or 6.00 inch x 16 inch tires. 2500 pound capacity. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 506020M91, 195638M91, 535448M91, R2055, and 1883335M3. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $72.00

Front Wheel Hub Seal - This Front Wheel Hub Seam measures 9/16 inches inside diameter, 2 11/16 inches outside diameter and 3/8 inches wide. Replaces OEM numbers 646110M1, 6110M1, 897363M1, 897363V1, 190443M1, 2048A, 319394M1, 2048B, 180008M1, 105334, G13053 (Item #: 112187) $5.60

Hub Cap WITH Zerk Fitting - Threaded. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. 2.00 inch outside thread diameter, 24 right hand threads. Has Zerk fitting center of cap. 2.00 inch with 24 RH Thread. (Item #: 100661, Ref: 1884289M1WZ) $6.40

Hub Cap Without Zerk Fitting - Threaded. 2.00 inch outside thread diameter, 24 right hand threads. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. Replaces 1884289M1 (Item #: 183735, Ref: 2N1139B) $11.40

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 180876M1, 353427X1. (Item #: 184824, Ref: 350719KIT) $22.50

Rear Spinout Rim Stop - For 90 degree drilled rim rail. For spin out rims with 4 sided rectangle shaped stops. Limited applications, verify style before ordering. Will NOT fit the spinout rims that we offer. Replaces 232274, 1755060M1, 230832, 70230832, 7023227, E5NN1057BA, K917337, T14751 (Item #: 152053, Ref: 1755060M1) $16.20

No
Picture
Spin-Out Rim Stop - For Massey Ferguson tractor models Super 90, TO35, 35, 50, 65, 135, 150, 165, 175, 180, 240, 282, 290, 298, 390, 398, 399, 670, 690, 698, 1080, 1100, 1130, 2640, 3050, 3060, 3070, 3090, 3630, 3650, 3680, 4225, 4235, 4245, 4255, 4270, 6150, 6170, 6180, 8120, 8140, 8150, 8160, Replaces Massey Ferguson OEM number 3531378M1, (Item #: 174311) $16.60

Spindle Dust Seal - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 50, 65, 135, 150, 165, 230, 235, 240, 245, Compatible with Massey Ferguson Construction and industrial models 20, 2135, Replaces Massey Ferguson OEM number 180355M2, 180355M1, Upper seal used on spindle upright, (Item #: 158129) $2.50

Spindle Tab Washer - This Tab Washer is used on Massey Ferguson FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, 130, 135, 148, 150, 165, 168, 175, 178, 180, 185, 20, 20B, 20C, 20D, 20E, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 30, 3165, 340, 342, 35, 350, 35X, 360, 375E, 40, 550, 565, 65, 765. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2 (Item #: 173191, Ref: 957E1195) $1.50

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 1751403M1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.60

Wheel Bearing Kit - For tractor models 35, 40, 50, 65, FE35, TE20, TO20, TO30, TO35. Kit contains 1 each: 15123 (Cone), 15245B (Cup), 09067 (Cone), 09195 (Cup), 180008M1 (Seal). Replaces 1810391M91, 835964M91. (Item #: 102486, Ref: WBKMF1) $22.60

Wheel Clamp - Rear wheel clamp for power adjust rear rims.For tractor models 1080, 1100, 1130, 135, 150, 165, 175, 180, 240, 2640, 282, 290UK, 298, 3050, 3060, 3070, 3090, 35, 3630, 3650, 3680, 390, 398, 399, 4225, 4235, 4245, 4255, 4270, 50, 6150, 6170, 6180, 65, 670, 690, 698, 8120, 8140, 8150, 8160, Super 90, TO35. Also replaces p/n 1755057M2, 70235676. (Item #: 124526, Ref: 898021M1) $18.20

Wheel Stud - Front wheel stud. Measures 1.59 inches overall length and .930 threaded length. Threads are 1/2 UNF. These are #5 Steel per OEM specification and may come with a silver steel finish or a gold zinc finish. Fits TE20, TEA20, TO20, TO30, TO35, FE35, F40, 1100, 1130, 130, 135, 150, 165, 175, 180, 202, 203, 204, 2135, 250, 253, 255, 263, 270, 275, 281, 283, 290, 30, 3165, 340, 35, 350, 355, 360, 365, 375, 390, 4225, 4255, 4265, 50, 575, 590, 65, 675, 690, 85. (Item #: 108606, Ref: 181328M1) $1.30

Wheel Stud Nut - Nut is 9/16x18 inches For tractor models 135, 148, 150, 20, 202, 204, 205, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 265, 285, 30, 30D, 3165, 35, 50, 65, F40, FE135, FE35, TO35. May come in a silver metal color or as pictured. (Item #: 126617, Ref: 180004M1) $1.60

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.20

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.80

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.60

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.90

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.90

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.40

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $77.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $99.00

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $22.60

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $28.30

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $31.00

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

$Ferguson 65 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $132.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $163.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $147.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Ferguson 65 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Ferguson 65 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ferguson 65 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Ferguson 65 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Ferguson 65 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Ferguson 65 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.08

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $13.80

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.10

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Ferguson 65 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.60

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.00

Drawbar - Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Item #: 103174, Ref: 180485M1) $42.10

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $70.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $90.00

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $68.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $89.00

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $90.30

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $90.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $64.05

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $29.20

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $76.00

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $89.00

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $77.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $257.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.62

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $64.00

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.80

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $20.60

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $140.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $872.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $75.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.40

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $303.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.70

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $104.78

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $108.25

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $420.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $123.00

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $91.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $4.40

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $29.30

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $57.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $71.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $27.00

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.40

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $61.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $90.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $35.00

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $11.00

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $53.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $21.60

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.70

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $56.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $24.00

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.20

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $138.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $61.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $10.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.01

Seats

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $56.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $76.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $135.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $147.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $138.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $63.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Item #: 183819, Ref: WHS064) $82.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00