FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Oliver 60 Tractor Parts

[Categories] [All Oliver Models] [Print]

Clutch

Pilot Bearing - Bearing measures .591 inches I.D. and 1.378 inches O.D.. For tractor models 2-44, 55, 550, 552, 60, 66, Super 55, (Super 66 after SN# 7085). (Item #: 108447, Ref: JD10107) $1.80

Release Bearing Fork - Throwout Bearing Fork for Models: (1550, 1555 SN# 160000 and up), 160, (1650, 1655 SN# 147569 and up), 170 Workhorse, (1750 SN# 180537 and up), 1755, (1800, 1900 SN# 90525 and up), 185, (1850, 1950 SN# 150421 and up), (1855, 1955 SN# 220000 and up), (195 Workhorse, (2050, 2150 SN# 204001 and up), (White 2-105, White 2-110, (White 2-135 SN# 272595 to 292563), (White 2-150, White 2-155, White 2-180, (2255 SN# 235650 and up), 2270, (White 2-62 SN# 160000 and up), White 2-70, (White 2-78, White 4-78 SN# 147569 and up), White 2-85, White 2-88, White 4-150, White 4-175, White 4-180, White 4-225, 60 American, (770, 880 SN# 60501 and up), 80 American. Replaces 101510A. (Item #: 172793, Ref: 72160045) $153.00

Transmission Plate, Driven - For tractor models Field Boss 185, (White 2-155 SN# 287812 and up with over under trans), (140, 145 Workhorse, 160, 170 Workhorse, 185, 195 Workhorse, White 2-180, White 4-150, White 4-175, White 4-210, White 4-225, White 4-270, 60 American, 80 American all with over under trans). Replaces 30-3214346. (Item #: 160796, Ref: 72161819) $20.40

Transmission Plate, Seperator - For tractor models (White 2-155 SN# 287812 and up with over under trans), (140, 145 Workhorse, 160, 170 Workhorse, 185, 195 Workhorse, White 2-180, White 4-150, White 4-175, White 4-210, White 4-225, White 4-270, 60 American, 80 American all with over under trans). Replaces 303061825. (Item #: 160795, Ref: 72161818) $14.50

Cooling System

Radiator - Core is 18.50" high, 20.50" wide. For model 60 American less cab. (Item #: 101832, Ref: 303451321) $740.00

Radiator Cap - Original style with "WATER" Iimprint, non-pressurized system. For tractor models 60, Super 55, Super 66, 66, 77, 88, 70. Replaces 1B507 (Item #: 112117, Ref: 43983D) $9.50

Radiator Hose, Lower - 2.250" I.D.. For tractor models 60, 80. (Item #: 159371, Ref: 303457265) $19.90

Thermostat - 180 Degree thermostat for 1550, 1555, 550, 570, 570 Super, 60, 66, 770, 880, Super 66. (Item #: 110455, Ref: 101400A) $20.80

Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: Super 55, Super 66, Super 77, Super 88, 60, 66, 77, 88, 90, 99, 550, 660, 770, 880, 900, 1550, 1555, and 1600. It does not come with a gasket. Replaces Oliver/White numbers 3112353, 311807, J-525, J-525A and Cockshutt T5380, T5406, 3112353. (Item #: 110010, Ref: R1852) $39.00

Thermostat - This Thermostat opens at 180 degrees F. It is used on the following Oliver: 1550, 1600, 1650, 440, 550, 60, 66, 660, 77, 770, 88, 880, 90, 950, 99, Super 55, Super 66, Super 77, Super 88, Super 99. Replaces 101400A, 102148A (Item #: 110455, Ref: 70229927) $20.80

Water Pump - For 100, 120, 140, American 60, American 80, Workhorse 125, Workhorse 145, Workhorse 6124, Workhorse 6125, Workhorse 6144, Workhorse 6145. It comes with o-ring. Also replaces 72515588, 3913432. 30-3456242, A77703 (Item #: 100796, Ref: 303456242) $55.00

Water Pump, Less Pulley - For model 60. (Item #: 172633, Ref: HS350A) $151.00

Decals and Emblems

No
Picture
Decal Set - Complete set for models 60 Row Crop. This is an 8 piece set. These are printed on Mylar, not die cut. (Item #: 102860, Ref: R0410) $41.70

No
Picture
Decal Set - Complete set for model 60 Standard. (Item #: 102800, Ref: R0409) $75.00

No
Picture
Decal Set - Complete set for GOODISON Model 60 Standard. (Item #: 183080, Ref: R3982) $86.00

Oliver Decal Set, Finest in Farm Machinery, 10", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Finest in Farm Machinery", 10", Vinyl decal, (Item #: 102950) $29.70

$Oliver 60 Oliver Decal Set, Finest in Farm Machinery, 1-7\8 inch, Vinyl$
Oliver Decal Set, Finest in Farm Machinery, 1-7/8", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Finest in Farm Machinery", 1-7/8", Vinyl decal, (Item #: 102946) $3.80

Oliver Decal Set, Finest in Farm Machinery, 4", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Finest in Farm Machinery", 4", Vinyl decal, (Item #: 102947) $11.20

Oliver Decal Set, Finest in Farm Machinery, 6", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Finest in Farm Machinery", 6", Vinyl decal, (Item #: 102948) $18.60

Oliver Decal Set, Finest in Farm Machinery, 8", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Finest in Farm Machinery", 8", Vinyl decal, (Item #: 102949) $20.50

$Oliver 60 Oliver Decal Set, Keystone, 1-7\8 inch, Vinyl$
Oliver Decal Set, Keystone, 1-7/8", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Keystone, 1-7/8", Vinyl decal, (Item #: 102942) $3.80

Oliver Decal Set, Keystone, 3", Mylar - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Keystone shield, 3" Mylar decal, (Item #: 102958) $3.80

Oliver Decal Set, Keystone, 4", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Keystone, 4", Vinyl decal, (Item #: 102943) $14.90

Oliver Decal Set, Keystone, 7", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Keystone, 7", Vinyl decal, (Item #: 102944) $20.50

Oliver Decal Set, Keystone, 9", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Keystone, 9", Vinyl decal, (Item #: 102945) $26.00

$Oliver 60 Oliver Decal Set, Sales\Service, 10 inch, Vinyl$
Oliver Decal Set, Sales/Service, 10", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Sales and Service", 10"diameter, Vinyl decal, (Item #: 102954) $29.70

$Oliver 60 Oliver Decal Set, Sales\Service, 4 inch, Vinyl$
Oliver Decal Set, Sales/Service, 4", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Sales and Service", 4"diameter, Vinyl decal, (Item #: 102951) $10.10

$Oliver 60 Oliver Decal Set, Sales\Service, 6 inch, Vinyl$
Oliver Decal Set, Sales/Service, 6", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Sales and Service", 6"diameter, Vinyl decal, (Item #: 102952) $18.60

$Oliver 60 Oliver Decal Set, Sales\Service, 8 inch, Vinyl$
Oliver Decal Set, Sales/Service, 8", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Sales and Service", 8"diameter, Vinyl decal, (Item #: 102953) $20.50

Oliver Decal Set, Shield, 10" Red, Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 10" Red, Vinyl decal, (Item #: 102941) $29.70

$Oliver 60 Oliver Decal Set, Shield, 1-1\2 inch Red and Green, Mylar$
Oliver Decal Set, Shield, 1-1/2" Red and Green, Mylar - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 1-1/2" Red, Mylar decal, (Item #: 102956) $3.80

$Oliver 60 Oliver Decal Set, Shield, 1-1\2 inch Red, Green and Black, Mylar$
Oliver Decal Set, Shield, 1-1/2" Red, Green and Black, Mylar - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 1-1/2" Red, green and black, Mylar decal, (Item #: 102955) $3.80

$Oliver 60 Oliver Decal Set, Shield, 1-7\8 inch Red, Vinyl$
Oliver Decal Set, Shield, 1-7/8" Red, Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 1-7/8" Red, Vinyl decal, (Item #: 102937) $3.80

Oliver Decal Set, Shield, 3" Red and Green, Mylar - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 3" Red, Mylar decal, (Item #: 102957) $3.80

Oliver Decal Set, Shield, 3" Red, Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 3" Red, Vinyl decal, (Item #: 102938) $7.30

Oliver Decal Set, Shield, 6" Red, Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 6" Red, Vinyl decal, (Item #: 102939) $18.60

Oliver Decal Set, Shield, 8" Red, Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 8" Red, Vinyl decal, (Item #: 102940) $20.50

Tractor Decal Set, Oliver 60 Row Crop, Vinyl - For Oliver tractor model 60 (Row Crop), Vinyl decals, For Mylar decal set use Item #: 102860, (Item #: 102799) $75.00

Drive Train

Gear Shift Boot - For tractor models 550, 660, 770, 880, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150, 2255, (White 2-70, 2-85, 2-105, 4-150, 4-180), 60 American, 80 American, Super 55, 60, 66, Super 66, 70, 77, Super 77, 88, Super 88. (Item #: 114539, Ref: BA916A) $9.80

Shift Knob - For tractor models Super 44, Super 55, Super 66, Super 77, Super 88, Super 99, 60, 70, 66, 77, 88, 660, 770, 880, 950, 990, 995, 1550, 1650, 1750, 1800, 1850, 1950, 1950T, 2050, 2150, 1555, 1655, 1755, 1855, 1900, 1955, 2255, 2-44, 2-70, 2-85, 2-88, 2-105, 100, 120, 125 WORKHORSE, 140, 145 WORK HORSE, 160, 170, 185, 195. Replaces 103098A, B909A, 72160047. (Item #: 110012, Ref: BB7213A) $4.20

Electrical System

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. Replaces part number 1H7406. For tractor models Super 55, 60, 66, Super 66, 550, White 2-44. (Item #: 104554, Ref: 1750411M91) $8.50

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models Super 44, 440, 60, Super 55, 550, 66, Super 66, 660, 70, 77, Super 77, 770, 88, 880, 90, 99, 1600, (1800 up to serial number 124395), Cockshutt 540, Cockshutt 550, Cockshutt 570. (Item #: 103153, Ref: 1900119) $9.00

Distributor, Remanufactured, Delco Remy, 1111530, HS7324 - For Oliver tractor model 60, Replaces Oliver OEM number HS7324, Replaces Delco Remy manufacturer number 1111530, Includes new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, For Dust Cover use Item #: 104554, (Item #: 205100) $265.01

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Round Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.345 inch diameter round hole. If not sure, measure before ordering. Used on Super 44, 440, 60, 66, 70, 77, 88, 90, 900 (Industrial), 99, Cockshutt 540; Replaces: MA466, MA467, MA625, MA789, MA790, MA797, MA798, MA799, 1H7430, 1H7431, 1H7432, 1H7433, 1H7434, 1H7436, 1H7437 (Item #: 111459, Ref: 1878405ASSY) $15.00

Electronic Ignition Conversion Kit, 12 volt negative ground - For Oliver 44, 55, 60, 66, 99, 550. For the following Delco distributors: 1111716, 1112614, 1112555, 1111530, 1111704, 1112555, 1112618, 1111411, 1885555. Replaces points and condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fule economy. Compatible with all 12-volt negative ground systems and 6-volt systems that have been converted to 12-volt negative ground. (Item #: 105071, Ref: 1142) $155.00

Electronic Ignition Conversion Kit, 6 volt positive ground - For 44, 55, 60, 66, 99, 550. For the following Delco distributors: 1111716, 1112614, 1112555, 1111530, 1111704, 1111411, 1885555, 1112618. Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For distributors with clip type cap. For use on 6 volt positive ground system only. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. (Item #: 105072, Ref: 1142P6) $160.00

Ignition Tune-up Kit - For Delco Clip-Held Cap Distributor. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Includes points, condenser, and rotor. For tractor models 44, 90, 900, 55, 60, 66, 99, 550, 70, 77, 88, 770, 880, 950, Super 44, Super 55, Super 66, Super 77, Super 88, Super99, 440, 660, 1800, AG, AG6, BG, DG, OC4, OC6. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. (Item #: 103151, Ref: ATK1DCR) $9.50

Rotor - Used with Delco distributors with a clip held cap. For tractor models: 60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, 90, 99, Super 99, Super 44, Super 55, Super 66, 440, 550, 950, 1800 (up to serial number 124395 with 111263). Replaces 1H7416 and 1K7416. (Item #: 110177, Ref: 1750498M1) $3.60

Spark Plug Wire Set - This is an Original Style Spark Plug Wire Set with Cotton Braid Wire. Used on Oliver 60, 550 and Super 55 Tractors. Like original, these do not come with a boot on the spark plug end. (Item #: 179316, Ref: R6773) $42.60

No
Picture
Starter - Delco Style DD (4759), Remanufactured, Delco Remy, 1109452 - For Oliver tractor model 60, Replaces Delco Remy manufacturer number 1109452, Replaces manufacturer number 4759, 140-9828, 74759, Delco Style: Direct Drive, Voltage: 6, Rotation: Clockwise, Teeth: 10, For Starter Drive use Item #: 109966, (Item #: 203216) $412.39

Starter Drive - For tractor models 2310, 2600, 2810, (U, ZAU ALL SERIES with DELCO STARTER 1107905), (0C6, 60, 70, 80 ALL with 6 VOLT DELCO STARTERS 1107065 and 1107939). (Item #: 109966, Ref: 1850844) $37.70

Starter Drive Spring - Services 6 volt starters Delco 738-U, 1107065, 1107939 on Models: 60, 70, 80, 55, 66, 77, 88, OC-6. 12 volt starter 1107682 on Models: 55, 66, 77, 88, 550, 770, 880, 1600, 1800. Replaces Delco 1850812. (Item #: 111380, Ref: B7720) $35.30

Starter Solenoid - 12 volt, fits Delco starter 1998457. For tractor models 100, 120, 125 Workhorse, 140, 60 American, 80 American. (Item #: 117516, Ref: 303457575) $23.80

Tune-up Kit, Basic - This basic tune-up kit is for Delco Distributors with Clip held cap, 4 Cylinder gas. Kit includes Points, Condenser, Rotor, Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs). For tractor models Super 55, 60, 66, Super 66, 550, White 2-44. Verify correct spark plug replacement. (Item #: 173738, Ref: MFITK10) $27.30

No
Picture
Wiring Harness - Main engine harness, cloth sewn. For model 60. (Item #: 180036, Ref: R4625) $49.17

Wiring Harness - For Oliver tractor model 60 (rowcrop or standard with cut-out), For 6 volt generator systems only with cut-out, Cotton braided - exactly like original, Includes headlight wires and wiring instructions, All terminals are soldered and sealed, (Item #: 126806) $236.44

Engine Bearings

Connecting Rod Bearing - .010 - For Oliver tractor models Super 55, Super 66, Super 77, 60, 66, 77, 550, 660, 770, Sold per journal, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 107528, (Item #: 107529, Ref: CRK-W016-010) $35.80

Connecting Rod Bearing - .020 - For Oliver tractor models Super 55, Super 66, Super 77, 60, 66, 77, 550, 660, 770, Sold per journal, Bearing Size: .020" Oversize, For Standard connecting rod bearing use Item #: 107528, (Item #: 107530, Ref: CRK-W016-020) $34.40

Connecting Rod Bearing - Standard - Journal - For Oliver tractor models Super 55, Super 66, Super 77, 60, 66, 77, 550, 660, 770, Bearing Size: 2.00" Standard Rod Journal, Sold per journal, For .010" connecting rod bearing use Item #: 107528, (Item #: 107528, Ref: CRK-W016) $37.60

Rod Bearing, Standard - This a single standard rod bearing. These are for the 2.250 inches rod journal. 6 required per engine. This fits models: Super 55, Super 66, Super 77, Super 88, 60, 66, 77, 88, 550, 660, 7 70, 8 80, 1550, 1555, 1600. Replaces 191010A, K217A, S1191010A, and CB-451P-STD. (Item #: 107408, Ref: CRK-W026-STD) $16.20

Engine Gaskets

Head Gasket Set - For Oliver tractor model 60, Engine: Waukesha 121 Gas, (Item #: 107612) $321.00

Engine Parts

Camshaft - For tractor models 60 American with 4-390 engine, 80 American with 4T-390 engine. Replaces 30-3484815, 72515594. (Item #: 123506, Ref: 3929039) $135.00

No
Picture
Crankshaft, Remanufactured, 160211 - For Oliver tractor model 60 (gas), Replaces Casting number 160211, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200605) $390.01

No
Picture
Cylinder Head, Remanufactured, 160002 - For Oliver tractor model 60 (gas), Replaces Oliver Casting number 160002, Cylinders: 4, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200550) $720.01

No
Picture
Cylinder Head, Used - For Oliver tractor model 60, Replaces Oliver Casting number 160002, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200550, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400550) $349.01

Ring Gear, Flywheel - This ring gear has 159 teeth and measures 16.06 inches outside diameter and 15.092 inside diameter. For tractor models 100, 120, 125 Workhorse, 140, 145 Workhorse, 60 American, 6124, 6125, 6144, 6145, 80 American, 8310, 8410. Replaces 30-3456153. (Item #: 159134, Ref: 3901774) $39.00

Exhaust System

Manifold - Intake and Exhaust. For model 60. Order Manifold Gasket Set R4435G if Needed. Replaces H415B, H415A (Item #: 180025, Ref: H415A) $189.00

Manifold Gasket Set - For model 60. (Item #: 179653, Ref: R4435G) $21.60

Fuel System / Air Intake

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Oliver and White tractors, it is used on the following carburetors: TSX49, TSX120, TSX138, TSX168, TSX181, TSX186, TSX221, TSX363, TSX374, TSX380, TSX384, TSX397, TSX399, TSX405, TSX418, TSX477, TSX581, TSX603, TSX610, TSX665, TSX738, TSX755, TSX791, TSX807, TSX811, TSX868, TSX880, TSX903, USX29, USX32, USX32-1. These carburetors are possible on the following models 2-44, 2-70, 60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, 99, Super 99, Super 44, Super 55, Super 66, 440, 550, 900, 950, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, OC-4, OC-9, OC-12. Replaces 1H7610, H7610 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor Gasket Set - 5-piece gasket kit is for small bowl Marvel Schebler carburetors. The overall length of the bowl gasket is 4-5/16 inch. 60, 66, 70, 77, Super 77, 660, Super 44, Super 55, Super 66, 440, 550, OC3, White 60 with the following carburetors: TSX120, TSX138, TSX186, TSX264, TSX338, TSX363, TSX380, TSX418, TSX480, TSX49, TSX520, TSX531, TSX603, TSX633, TSX665, TSX694, TSX804, TSX94, TSXU828, TSXU829, TSXU830, TSXU831, TSXU832, TSXU833 (Item #: 182465, Ref: 9N9502) $4.20

Carburetor Kit, Basic - Kit for Marvel TSX603, TSX120, TSX49, TSX138, v418, TSX363, TSX186, TSX380, TSX665, TSX694 carbs used on 550, 60, 66, 660, 70, 77, Super 44, Super 55, Super 66, Super 77, Super 99. (Item #: 100733, Ref: MS101) $15.60

Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is used on Marvel-Schebler numbers TSX120, TSX138. The Kit contains all the parts shown. Verify Carburetor before ordering. (Item #: 184662, Ref: R8112) $63.00

Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is for Marvel-Schebler number TSX49. The kit contains all the parts shown. (Item #: R8110) $54.51

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX49, TSX120. For the following tractor models: 60. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203995, Ref: 1902-CARB) $225.01

Fuel Filter, Final - Fuel Filter for tractor models 550, 660, 770, 880, 1600, 1650 up to serial number 187586, 1550, 1555. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. All with Diesel Engines. Replaces 609689AS, 159044AS, 159044AS, 20-7100980, 20-7100980 243190601, 163953AS. (Item #: 158868, Ref: CAV7111296) $8.20

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 1J-5304, 1J5304. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. For the following models:60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, Super 99, Super 44, Super 55, Super 66, 440, 550, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1950T, 2050, 2150. Replaces IJ5301 and IJA-5301. (Item #: 105382, Ref: 9N9162) $3.20

Sediment Bowl Assembly - Large Bowl. 1/8 inch pipe thread to fuel line, 3/8 pipe to tank. Fuel Strainer assembly with 2.25 inch bowl. For the following models using the long bowl: 60, 66, 70, 660, 80, 90, 99, Super 99, Super 66, 950. Replacement bowl available as part S.65504. Replaces 112180, CS841, JS841, WJAS841. (Item #: 105393, Ref: S.61581) $22.00

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: 60, 66, 70, 660, 80, 90, 99, Super 99, Super 66, 950. Replaces 31-2761387, 1C-5301, CA5301, C5301, and 1JAS-841. (Item #: 105365, Ref: S.65504) $6.10

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 1BS-5307A, 1J-5307 (Item #: 105364, Ref: 49923D) $3.30

Gauges

Water Temperature Sender - 1/2" NPT. For tractor models Field Boss 185, 100, 120, 125, 140, 145, 160, 170, 185, 195, White 2-135, White 2-150, White 2-155, 60, 80. Replaces 30-3167526, 30-3391116. (Item #: 173209, Ref: 71312851) $19.20

Lights

Headlight - 6-volt, 5 3/4 inch diameter. Fits Super 55, 60, 66, 77, Super 77, 88, Super 88, Super 99. (Item #: 105351, Ref: R2025) $82.00

Headlight - 12-volt, 5 3/4 inch diameter. Fits Super 55, 60, 66, 77, Super 77, 88, Super 88, Super 99. Replaces: 1H7379A, 1K7379A. Zinc Plated. (Item #: 105352, Ref: R2024) $86.00

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: 60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, 80, 90, 99, Super 99, Super 44, Super 55, Super 66, 440, 500, 550, 900, 950, 990, 995, 1250, 1250A, 1255, 1265, 1355, 1365, 1450, 1465, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1865, 1870, 1900, 1950, 1950T, 1955, 2-105, 2-150, 2-80, 2-85, 2050, 2055, 2150, 2155, 2255, 2270, 2655, 4-105, 4-150, 4-180, 4-80, 4-85. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00

No
Picture
Light Switch, 3-Position - For tractor models 30, 40, 50, 60, 70, BF, BG, E3, E4, E5, UTS all with cut out on generator. (Item #: 105312, Ref: 70208197) $23.00

PTO / Driveline

PTO Drive Hub - 12 internal spline. For tractor models (60, 80 American series tractors). (Item #: 172396, Ref: 303420116) $182.00

PTO Shaft - 12 splines, 68.750" long. For tractor models (60, 80 American series). (Item #: 172399, Ref: 303422690) $269.00

PTO Shaft, 540 RPM - 23 spline. For tractor models White 2-70, 60 American, 80 American, (1650, 1655, White 2-78, White 4-78 serial number 147569 and up), (1550, 1555, White 2-62 serial number 160000 and up). (Item #: 116894, Ref: 158287A) $197.00

Seats

Seat Spring, Rubber - This Seat Spring is used on Oliver: Super 66, Super 77, Super 88, Super 99, 60 Standard Serial number 474232 and up, 66 Rowcrop Serial Number 429771 and up, 660, 77 Rowcrop Serial Number 347732 and up, 77 Standard Serial Number 273376 and up, 770, 88 Rowcrop Serial Number 136899 and up, 88 Industrial Serial Number 920856 and up, 88 Standard Serial Number 826416 and up, 880, 950, 990, Industrial: 60 Serial Number 462256 and up, 77 Serial 403291 and up. Replaces K1854A (Item #: 105356, Ref: 1K1854A) $37.00

Sheet Metal / Body Parts

Engine Panel Set, 4 Piece - Includes RH/LH front, RH/LH rear, hinge pins, springs, clips and latches, black primered on 14 gauge metal. For tractor models (Cockshutt 60 Row crop), 60. Replaces HS1016, HS1015, HS1378. (Item #: 179253, Ref: HS1377) $580.01

Fender, Left Hand - The fender skin is 25" tall. The brackets extend an additional 7" below the skin.-- FIT TO TRACTOR BEFORE PAINTING---This fender is primer painted, color may vary, it will need to be sanded and filler primer to fill in any spots from spot welding. Replaces: HS861, JS861 (Item #: 179281, Ref: JS861) $241.00

Fender, Right Hand - The fender skin is 25" tall. The brackets extend an additional 7" below the skin.-- FIT TO TRACTOR BEFORE PAINTING---This fender is primer painted, color may vary, it will need to be sanded and filler primer to fill in any spots from spot welding. Replaces: HS860, JS860 (Item #: 126642, Ref: JS860) $234.94

Steering

Steering Wheel - 18" diameter, 7/8", 3 steel spokes. For model 60. (Item #: 101465, Ref: HA767) $42.00

Steering Wheel - 16 inch diameter, replaces OEM# HA767. For model 60 (Early - Verify OEM part #). (Item #: 101465, Ref: R2419) $42.00

Steering Wheel - 16" diameter, 13/16" keyed hub, 3 covered spokes. For tractor models (60 late), (66 early). (Item #: 101466, Ref: H767) $56.00

Steering Wheel Cap - Steel. For tractor models Super 55, 60, 66, Super 66, 77, Super 77, 88, Super 88. (Item #: 101470, Ref: 1E1082) $20.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Super 55, Super 66, Super 77, Super 88, Super 99, 1555, 1600, 1650, 1750, 1850, 1800, 1900, 550, 60, 70, 80, 66, 660, 77, 770, 88, 880, 90, 950, 99, 990, and 995. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 915090, 72162485, and S170. (Item #: 157780, Ref: 353435X1) $1.00

Tie Rod, Short - A= 3.50", 11/16" diameter, 18 RH thread. For tractor models 1550, 1555, 1650, 1655, 1755, (1800 row crop SN# 90525 to 115376 and wheatland SN# 90525 and up), 1855, (1900 wheatland SN# 90525 and up), 1955, White 2-62, White 2-78, White 4-78, (60 row crop SN# 600001 and up), (770, 880 row crop). Replaces KS1160. (Item #: 108171, Ref: 107291AS) $25.90

Wheels

Front Rim-Heavy Duty - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces 100014A, 30-3040003, K905277, K907805, G57046, K914312, 3114166R91 (Item #: 116854, Ref: FW55166) $70.00

Wheel Bolt - This wheel bolt fits the following tractor models: Super 55, Super 66, Super 77, Super 88, 550, 60, 66, 660, 70, 88, 880, 1550, 1555, 1600, 1650, 1655, 1755, 1800, 1850, 1855, 1900, 1950T, 1955, 2050, 2150, 2255, 77, 770, 2-62, 2-105, 2-110, 2-135, 2-150, 2-155, 2-70, 2-78, 2-85, and 2-88. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number: 1H706A. (Item #: 108605, Ref: WB916) $2.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Oliver Shield Decal - 3/4 inch. printed on vinyl. Decal size is 3/4 inch by 3/4 inch. (Item #: 178286, Ref: R5239) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Item #: 179436, Ref: AL65) $4.40

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

Starter Switch - Used on models with 6 volt manual starters. Replaces B7392A (Item #: 105684, Ref: 9N11450A) $9.90

Starter Switch - 4-position: LEFT=accessories, CENTER=off, RIGHT accessories and ignition, FAR RIGHT start. 4 stud terminals. 7/16 inch long mounting stem with 3/4 inch dia. 2 brass keys. 1 1/8 inch mounting nut. This does not fit all models. (Item #: 109511, Ref: 782979) $22.00

$Oliver 60 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Oliver 60 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Oliver 60 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Oliver 60 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Oliver 60 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Oliver 60 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Oliver 60 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Carburetor Elbow and Strainer - Fits some Oliver and Cockshutt models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$Oliver 60 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 25 Micron replacement element for SF2-25 filter assembly. (Item #: 159754, Ref: 1A9253) $43.40

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Cockshutt Red, 1 Quart - This Cockshutt Red is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on models from 1969-1975, 1555, 1655, 1755, 1855.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108385, Ref: TP185QT) $29.80

No
Picture
Paint, Cockshutt Red, Spray Can - This Cockshutt Red is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on models from 1969-1975, 1555, 1655, 1755, 1855.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108018, Ref: TP185SP) $9.60

No
Picture
Paint, Cockshutt Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108392, Ref: TP175GAL) $112.00

No
Picture
Paint, Cockshutt Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108391, Ref: TP175QT) $46.20

No
Picture
Paint, Cockshutt Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108390, Ref: TP175SP) $9.10

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Grey Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Med. Green, 1 Gallon - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102964, Ref: TP221GAL) $62.00

No
Picture
Paint, Med. Green, 1 Quart - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102963, Ref: TP221QT) $23.30

No
Picture
Paint, Med. Green, Spray Can - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102962, Ref: TP221SP) $8.80

No
Picture
Paint, Oliver Yellow, 1 Gallon - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108392, Ref: TP224GAL) $112.00

No
Picture
Paint, Oliver Yellow, 1 Quart - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108391, Ref: TP224QT) $46.20

No
Picture
Paint, Oliver Yellow, Spray Can - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108390, Ref: TP224SP) $9.10

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056) $2161.57

Tie-on Seat Cover - Green and Red, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179515, Ref: R2603) $53.00

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref: S.04352) $3.20

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 100014A, 30-3040003 (Item #: 103768, Ref: FW60166) $92.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00