FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 356 Tractor Parts

[Categories] [All Massey Ferguson Models] [Print]

Brakes

Brake Actuating Spring - Used with disc brakes. For tractor models Super 90, 1001, 1080, 1085, 135 Orchard, 150, 154-4, 154S, 165, 165, 174S, 175, 180, 180, 194F, 203, 205, 2200, 2500, 254-4, 274-4, 294-4, 302, 303, 305, 3165, 356, 404, 406, 65, 85, 88, 95, 97, Industrial: 30, 31, 40, 50. Replaces: 1005510M1. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105. (Item #: 113798, Ref: A155624) $1.70

Brake Disc - For tractor models 135, 150, 165, 175, 180, 203, 205, 2500, 30, 302, 304, 31, 3165, 356, 40, 50, 65, 85, 88, 90. Replaces 1753117M91. Brake Disc is 7.125 inches X 4.000 inches in diameter and has 27 splines. (Item #: 105627, Ref: 1021314M1) $22.10

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00

Cooling System

Radiator Hose, Lower - For Perkins 4-203 diesel engine in tractors: MF65 industrials: 50, 50A, 302, 304, 356. For 302, 304, 356, 50, 50A, MF65 (Item #: 108112, Ref: 187554M1) $17.00

Radiator Hose, Upper - Hose, radiator upper. For Perkins 4-203 diesel engine in tractors: MF65 industrials: 50, 50A, 302, 304, 356. For 302, 304, 356, 50, 50A, MF65 (Item #: 155934, Ref: 186654M1) $8.00

Thermostat - Thermostat. For Continental Gas Equipped tractors: 2200, 202, 204, 2135, 3165, F40, TO35, 50, 2500, 302, 304, 356, 135, 150, 165, 175, 180, 35, 65, 35, Colt, MH21, MH20, MH22, MH50. 160 degree. Comes with gasket. Replaces 830842M91, 836000V91, 836000M1, 830842M91, 830685M91, 184406V2, 181566M1 (Item #: 108422, Ref: 836000M91) $14.00

Water Pump Pulley for Diesel - This Single Belt pulley replaces 31146582. For tractor models 165, 255, 30, 302, 304, 3165, 356, 408, 40B, 50A, 65, all with diesel. (Item #: 114590, Ref: 731805M1) $34.70

Drive Train

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $30.40

Bolt, Ring Gear to Case - 1/2 inch X 1 45/64 inch NF. 6 required. USE WITH NUT 891947M1. For tractor models 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 6 items. (Item #: 168810, Ref: 825776M1) $2.10

Coupling, Rear Drive Shaft - 3.750 inches long, 10 spline. For tractor models 135, 150, 165, 175, 180, 203, 205, 20E, 20F, 2200, 235, 24, 240, 245, 25, 250, 2500, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 360, 375, 383, 390, 390T, 392S, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 60, 60H, 60HT, 65, 6500, 6500H, 670, 675, 6800H, 690, 698, 699. (Item #: 160154, Ref: 1680189M1) $34.98

Differential Coupling Cap - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 6500H, 670, 6800H, 690, 698, 699, Super 90. (Item #: 172335, Ref: 898712M2) $90.00

Differential Cover - For tractor models 135, 150, 165, 175, 180, 20E, 20F, 2200, 235, 245, 250, 2500, 253, 255, 265, 272, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 670, 690. Replaces 894781M3, 894780M92. (Item #: 173126, Ref: 3759150M1) $199.00

Differential Lock Fork Coupler - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 172334, Ref: 897003M3) $77.00

Differential Pinion Gear - Verify that the gear you are replacing has 10 teeth and a 2.92 inch diameter. For tractor models 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 180, 1800, 1805, 203, 205, 2135, 2200, 2500, 302, 304, 3165, 35, 356, 40, 50, 65, 70, 80, 85, 88, Super 90. (Item #: 173507, Ref: 181275M1) $60.00

Gear, Reduction - 21 teeth, 39 spline. For tractor models 135, 150, 165, 175, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 6500, 6500H, 670, 6800H, 690. (Item #: 172350, Ref: 897005M1) $110.00

No
Picture
Gear Shift Knob - Round ball, 3/8 inch NF thread. For tractor models TO20, TE20, TEA20, TEF20, TO30, TO35, FE35, F40, 130, 135, 150, 165, 175, 20, 202, 203, 204, 205, 2135, 220, 2200, 2500, 30, 302, 303, 304, 30E, 3165, 320, 333, 35, 356, 40, 404, 406, 44, 444, 50, 50A, 50E, 555, 65, 85, 88, 90, Super 90, 95, 98, F40, FE135, MH50, TO35. (Item #: 150683, Ref: 180006M91) $4.00

Planetary Pinion Gear, (Epicyclic) - 12 tooth. For tractor models 135, 150, 165, 175, 178, 180, 203, 205, 20E, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 3165, 356, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50H, 5650, 60, 60H, 65, 6500, 6500H, 670, 6800, 690, 85, 88. (Item #: 170397, Ref: 894769M1) $38.98

Planetary Thrust Washer - This Planetary Thrust Washer is for tractor models 135, 150, 165, 202, 203, 204, 205, 2135, 302, 304, 3165, 35, 356, 50, 65, 85, 88, Super 90, F40, FE35, TO35. (Item #: 172988, Ref: 180414M1) $16.20

Rear Drive Coupling - Drive coupling, differential, rear. For tractors: TO35, MF50, MF65 industrials: 202, 204 Work Bull, 203, 205, 356 Tractor shovel, 2200 Treever, 2135 utility. 5 inches long, 10 splines 1-1/4 inch and 2 inches long. Replaces 183088M1, 880069M1, 880069M2 (Item #: 160182, Ref: 183088M1) $38.10

Shift Fork, 8 Speed - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Item #: 165985, Ref: 897065M2) $30.80

Electrical System

Coil, 12V - This 12 Volt Coil with internal resistor comes with bracket for Delco distributor with screw held cap. For tractor models 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50. (Item #: 105299, Ref: 189673M1) $18.00

Coil, Ignition 6V - Coil for Delco Distributor with clip held cap. For 202, 204, 20, 26, 27L, 27, 302, 303, 304, 34, 356, 35, 402, 404, 60, 70, 72, 80, 82, 90, 92, MF35, MF50, MF65, MF85, MF88, MH50, Super 92, Super 90, TO20, TO30, TO35. Replaces 1024481M91. (Item #: 105281, Ref: D4PE12029AA) $14.00

Distributor Cap 4 Cylinder - For tractor models 35, 50, 65, 135, 150, 165, 175, 180, 1100, MH50, IND 202, 204, 302, 304, 356. This is a Delco style screw on cap. (Item #: 105569, Ref: 1024914M91) $10.30

Distributor Cap 6 Cylinder - Distributor CAP For 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, MH50, Super 92, Super 90. For Delco. Replaces 1509692M1 812627, 824735, 825409, 1867722, 1889361, 1911597, 12338674, D301, D301A, D320. (Item #: 104557, Ref: 21A443) $12.00

Distributor Cap 6 Cylinder - Distributor CAP For 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50 (Item #: 105585, Ref: 1960810) $12.70

Distributor Dust Cover - Dust Cover for Delco Distributor with Clip Held Cap. For 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35. Replaces 1750491M91. (Item #: 103153, Ref: 1900119) $9.00

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Massey Harris 92 Combine, Massey Harris 50. Ferguson F40, TO30, TO35, 202, 204, 302, 304, 356, 50, 65, 85, 88, 95, 97, Super 90, 35. Replaces: 1750513M1, 1750514M1, 1750520M1, 22303X, 353444XL, 354119X (Item #: 111468, Ref: 1904376) $14.40

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit For Delco distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. Fits 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35, 95, 97, F40, 202, 204, MH50. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1111740. (Item #: 103151, Ref: ATK1DCR) $9.50

Solenoid Switch - Solenoid Switch, 12-volt. Three Post. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. For tractors: TO35, F40, MF35, MF50, MF65, MF85, MF90 Industrials: 202, 204, 302, 304, 256 utility gas and LP models. Replaces 182696M91, 182696M1. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.70

Starter - This is a new Delco Style Starter. 10 teeth, clockwise rotation, 12 Volt. For tractor models 135, 150, 165, 235, 30, 302, 304, 3165, 35, 356, 40, 65. All with diesel engines. Replace 535388M92, TS-1036, 1107503, 1107512, 1107860, 1107870, 191081M92, 191081M93, 515913M91, 515913M92, 579934M91, 579935M91, 72072956, 773363M91, AM1107860, S14192, 1108662, 1109264, 1200-0113, 1200-3119, 12301330, 1403617M91, 189117M91, 1900434M91, 1903617M91, 191091M92, 1998345, 1998377, 2072956, 323-673, 323-700, 323673, 323700, 515913M93 (Item #: 168794, Ref: 515913M91) $320.00

No
Picture
Starter - 9 teeth, clockwise rotation, 12 Volt. For tractor models 4500, 30B, 302, 304, 356, 230, 235, 248. All with gas engines. Refundable $100 core charge will be added to your order. (Item #: 203469, Ref: 513942M91) $377.80

Starter - This is an Off Set Gear Reduction replacement for 515913M91. It is used on 135, 150, 165, 235, 30, 302, 304, 3165, 35, 356, 40. All with diesel engines. Replace 535388M92, TS-1036, 1107503, 1107512, 1107860, 1107870, 191081M92, 191081M93, 515913M91, 515913M92, 579934M91, 579935M91, 72072956, 773363M91, AM1107860, S14192, 1108662, 1109264, 1200-0113, 1200-3119, 12301330, 1403617M91, 189117M91, 1900434M91, 1903617M91, 191091M92, 1998345, 1998377, 2072956, 323-673, 323-700, 323673, 323700, 515913M93, 1868283M5 (Item #: 181965) $151.00

Starter, 12 Volt - This new 12 volt starter with drive is for tractor models TO20, TO30, 35, 50, 65, 202, 204, 302, 356, TO35. Verify number off old starter. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 InchES), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Replaces the Delco number 1107226 and the original equipment numbers: 181541M91, 1109457, 182454M92, 1107654, 190004M91, 1107226 and TISCO starters 7877-EX, 81271-EX, 85451-EX, 4858MFGXL_12V, and 1900348M91. (Item #: 160371, Ref: 1107226) $220.00

Starter, 6 Volt ONLY, Continental GAS Engine - STARTER ASSEMBLY FOR 6 VOLT SYSTEMS ONLY with Continental Gas engine. For TO20, TO30, TO35, F40, MH50, 50, 65, Early 302, 304, 356. Has 9 tooth gear on bendix. Single bolted stud on rear side of starter (about 2 inches from the end) for electrical connection. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 Inches), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Can replace OEM starter numbers 181541M91, 1109457, 182454M92, 1107654, 190004M91, 1107226 and TISCO starters 7877-EX, 81271-EX, 85451-EX. 1 YEAR warranty. Measurement from the outer bolt flange to the end of nose cone is 3.274 inches. (Item #: 111068, Ref: 4858MFGXL) $158.00

Starter Drive - Drive assembly. For tractors, except diesel: MF35, MF50, MF65 industrials: 202, 204, 302, 356. Services starter 1107226. For 202, 204, 302, 356, MF35, MF50, MF65 (Item #: 178979, Ref: 1019269M91) $90.00

Starter Drive - Drive assembly. For Continental Z145 in tractors: 135, 150, 165, 175, 178, 180, 20 Indust/Const, 202 Indust/Const, 205, 20C Indust/Const, 2135 Indust/Const, 2200 Forklift, 2200 Gas, 230, 235 Indust/Const, 235 Orchard, 245, 245 Orchard, 2500 Forklift, 302 Indust/Const, 304 Indust/Const, 30B Indust/Const, 3165 Indust/Const, 35, 356 Indust/Const, 40, 4500 Forklift, 50 Indust/Const, 65 . Replaces Delco 1963808. 9 tooth, Clockwise Rotation, for Delco 10MT. Services starter 1108324. (Item #: 124822, Ref: 1025380M91) $29.68

Starter Nose Cone - VERIFY BOLT PATTERN - THIS NOSE CONE USES 2 BOLTS TO MOUNT TO THE STARTER BODY. If you have a 4 bolt, we do not have a replacement. Can fit OEM starter part number: 182454M92/1107654. For tractor models TO20, TO30, TO35, F40, MH50, 50, 65, Early 302, 304, 356. Replaces Delco number 1934316. Will NOT fit 4858MFGXL aftermarket starter. (Item #: 111739, Ref: 1751902M91) $45.10

Starter, Rebuilt 12 Volt - This remanufactured 12 volt starter has 9 tooth gear on bendix. Single bolted stud on rear side of starter (about 2 inches from the end) for electrical connection. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 InchES), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Replaces 1900347M91, 1900348M91, 4858MFGXL. A refundable $80.00 core charge will be added to your order. (Item #: 203430, Ref: TS-1126) $332.46

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 189158M1, 189158M91, 767828M91. (Item #: 121141, Ref: R7994) $12.00

Tune-up Kit, Basic - FOR DELCO DISTRIBUTORS WITH SCREW-HELD CAP. Ignition KIT with ROTOR For 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50, MF65. (Item #: 105278, Ref: ATK10DSR) $10.70

Tune-up Kit, With Plugs - This Tune-up Kit is for Clip held Cap Delco Distributors, 4 cylinder gas models and includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For models TO20, TO30, TO35, (MF35 with serial number prior to 245033), (MH50 with serial number Prior to 536249), (MF50 with serial nunber prior to 536249), (MF65 with serial number prior to 702825), MF85, MF88, MF90 Super, (35 Utility with serial number prior to 655001052), (35 Turf with serial number prior to 656000452), (202 with serial number prior to 308962), (204 with serial number prior to 343688), (302 with serial number prior to 119700082), (304 with serial number prior to 119750053), (356 with serial number prior to 570001025), Super 92. Verify correct spark plug size and type (Item #: 173738, Ref: MFITK10) $27.30

Tune-up Kit, With Plugs - This 4 cylinder Tune-up Kit is for Delco Distributors with screw type cap. VERIFY SPARK PLUG SIZE as this kit comes with AL386 that are 18MM, 1/2 inch reach and 7/8 hex size. For tractor models 35, 50, 65, 135, 150, 165, 175, 180, 1100, MH50, 202, 204, 302, 304, 356. Includes plugs, points, condenser and rotor. Verify correct spark plug size and type (Item #: 182530, Ref: MF-ITK-40) $27.00

Voltage Regulator - Voltage regulator, 12-volt. For MF tractors using Delco alternators Following Delco Alternators: 1100553, 1100557, 1100558, 1100566, 1100567, 1100568, 1100569, 1100570, 1100572, 1100590, 1100591, 1100662, 1100742, 1100750, 1100751, 1100778, 1100780, 1100787, 1100790, 1100791, 1100796, 1100797, 1100804, 1100810, 1100816, 1100817, 1100818, 1100834, 1100836, 1100837, 1100838, 1100839, 1100842, 1100843, 1100845, 1100846, 1100847, 1100849, 1100851, 1100856, 1100860, 1100870, 1100871, 1100875, 1100879, 1100883, 1100885, 1100886, 1100888, 1100889, 1100891, 1100892, 1100893, 1100895, 1100896, 1100905, 1100907, 1100908, 1100910, 1100916, 1100917, 1100921, 1100931, 1100932, 1100933, 1100939, 1100943, 1100944, 1100951, 1102943, 1102944, 1102945, 1119507. Replaces 1119507 1031060M1, 1031060M92, 1031060V92, 1031060M91, 1071060M91, 182548M1, 1903077M91, 508522M91 (Item #: 105289, Ref: 1031060M91) $22.20

Engine Bearings

Main Bearing Set, Perkins 203 Diesel, .010 - Bearing set .010 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Item #: 107178, Ref: 745406M91) $16.40

Main Bearing Set, Perkins 203 Diesel, .020 - Bearing set .020 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Item #: 107179, Ref: 745407M91) $22.80

Main Bearing Set, Perkins 203 Diesel, .030 - Bearing set .030 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Item #: 107180, Ref: 745408M91) $8.98

No
Picture
Main Bearing Set, Perkins 203 Diesel, STD - STANDARD bearing set for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Item #: 107177, Ref: 745405M91) $20.90

No
Picture
Rod Bearing Set, Perkins 203 Diesel, .010 - Bearing set .010 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Item #: 107110, Ref: 737067M91) $16.40

No
Picture
Rod Bearing Set, Perkins 203 Diesel, .020 - Bearing set .020 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Item #: 107110, Ref: 737068M91) $16.40

No
Picture
Rod Bearing Set, Perkins 203 Diesel, .030 - Bearing set .030 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Item #: 107112, Ref: 737069M91) $15.30

No
Picture
Rod Bearing Set, Perkins 203 Diesel, STD - Bearing set STANDARD for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Item #: 107109, Ref: 737066M91) $14.50

Thrust Washer Set - 4 Pieces - FOR AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 107167, Ref: 31137211_21) $7.00

Thrust Washer Set - 4 Pieces - Tabbed. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50.735113M1 (Item #: 107167, Ref: 31137211_21) $7.00

Thrust Washers - Set of 4 Halves - FOR AD3.152 Perkins Diesel. Engine serial number 8504190> with offset tab and 6.354 Perkins Diesel Engine. Set of 4 halves, makes 2 complete thrust washers. (Item #: 107188, Ref: 31137551) $6.80

Engine Gaskets

Crankshaft seal, Front Lip Type, Perkins - Fits 152 CID 3 cylinder or 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203 and 205 to serial number 659002115, 35, FE35, MF35, MF50, 2135, MF235 engine serial number ending in D, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, 40B, 50, MF165, MF255. (Item #: 107221, Ref: 1851747M1) $9.20

Crankshaft Seal, Rear, Lip Type, Perkins - Used on Perkins Engines AG3-152, AD3-152, AD4-203, A4-236, A4-248, A4-318. For tractor models 135, 150, 20, 40, 2500, 230, 235, 4500, 200B, 245, 20C, 30B, 250 with engine serial number prefix CE22488U or CE31089U, 65, 165, 255, 30, 40B, 50, 302, 304, 356, 3156, 300, 175, 180, 265, 31, 6500, 275 with engine serial number prefix 248UA or LF---N or LF---U, 290 early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, 285, 1080, 1085, 540. (Item #: 107230, Ref: 1447049M91) $19.90

Crankshaft Seal, Rear Rope Type, Perkins - Sold individually - requires 2. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, 356, MF65, 300, 302, 304, 3165, MF165, 30, 40B, 50, MF255. (Item #: 107228, Ref: 735866M1) $2.60

Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits Massey Ferguson: 1001, 303, 406, 302, 304, 3165, 356, 404, 165, 175, 180, 65, 85, 88, Super 90, 303. Massey Harris: 33, 333, 44, 444, 44 Special, 55, 555. Replaces: 17627A, 834831M1 (Item #: 106642, Ref: 834831M1) $12.20

Gasket, Engine Bottom Set, Perkins 203 Diesel - For tractor models 356, 65 with A4-203 Regular Injection Perkins Engine, 3.6" standard bore, injectors vertical in cylinder head. Engine Bottom Gasket Set. Does not include Crankshaft Seals. Use with Top set #746051M91. (Item #: 107285, Ref: 743029M91) $95.00

Gasket, Engine Bottom Set, Perkins 203 Diesel - For tractor models 300, 356, 302, 304, 3165, 65, 165 with AD4-203 Direct Injection Perkins Engine serial number up to 29C1084. NOT for engines with DL in serial number ending. Engine bottom gasket set. Does not include crankshaft seals. Use with top set part number 735349M92. (Item #: 107306, Ref: 735350M92) $21.60

Gasket, Engine Top Set, Perkins 203 Diesel - For tractor models 356, 65 with A4-203 Regular Injection Perkins Engine, 3.6" standard bore, injectors vertical in cylinder head. Engine Top Gasket Set. Does not include Crankshaft Seals. Use with bottom set #743029M91. (Item #: 128618, Ref: 746051M91) $42.90

Gasket Set, Engine Top, Perkins 203 Diesel - For the following using AD4-203 Direct Injection Perkins Diesel Engine (Injectors at angle in head). Tractors: 65, 165, 255. Industrials: 30, 40B, 50, 302, 304, 356, 3165 Engine Top Gasket Set. Does not include Crankshaft Seals. NOT for engines with DL in serial number ending. (Item #: 107253, Ref: 735349M91) $31.70

Head Gasket - Head Gasket for head with injectors at angle in head. For tractor models (165, 255, 300, 302, 304, 3165, 356 engine serial number 2939036 and up), (365 engine serial number less than 2939035 not ending in DL), (30, 40B, 50 engine serial number 29C1085 and up), 65. Perkins AD4.203. Replaces VPA4316, 3641182M1, 3681E023, 36812126, 744391M1. (Item #: 173187, Ref: 36812138) $18.80

Lower Gasket Set - Bottom set, 203 CID Four Cylinder Perkins Diesel Engine serial number 29C1084 and up. For tractor models 300, 302, 304, 30, 3165, 356, 40B, 50, MF165, MF255, MF65. (Item #: 107306, Ref: 745987M91) $21.60

Oil Pan Gasket, Perkins 203 Diesel - Oil pan gasket. 203 CID 4 cylinder diesel engine, 3.6" standard bore, injectors vertical in cylinder head. For tractor models 356, MF65, MF165. (Item #: 107284, Ref: MF4203PG) $23.30

Oil Pan Gasket Set - Used on Perkins 203 Diesel Engine with Direct Injection (Injectors at an angle in the head). The engine is an option on Massey Ferguson models 165, 255, 30, 302, 304, 3165, 356, 40B, 50, 65 (Item #: 179286, Ref: MFD4203PG) $13.90

Seal, Rear Main - FOR AD3.152 and 6.354 Perkins Diesel Engines. 5.394 inch X 6.260 inch X .433 inch.303158411 (Item #: 107230, Ref: 1447049M91) $19.90

Timing Gear Cover Gasket - For tractor models 1100, 1130, 165, 255, 30, 300, 302, 304, 3165, 356, 40B, 50, 50A, 65. Replaces 36813114. Price shown is for each, sold only in multiples of 5 items. (Item #: 168424, Ref: 735848M1) $10.50

Upper Gasket Set - For tractor models (165, 255, 300, 302, 304, 3165, 356 all with engine serial number 2939036 and up), (30, 40B, 50 engine serial number 29C1085 and up), (365 up to engine serial number 2939035 not ending in DL), 65. All with AD4.203 Perkins Engine. U5LT0069 (Item #: 107253, Ref: 735349M91) $31.70

Engine Rebuild Kits

Basic Engine Kit, Perkins 203 Diesel - For tractor models 300, 302, 304, 3165, 40B, 50, 65, 165, 255 with AD4-203 Direct Injection Perkins Diesel, 3.6 inch standard bore, (Injectors at angle in cylinder head), valve spring count can vary, check cylinder head when disassembling. Kit used on engine serial number 29C1084 and up. For engines using lip type rear seal or 2 piece rope type seal. Kit contains cast sleeves (.150 flange thickness, pistons, rings, pins, retainers, pin bushings, gasket set and crankshaft seals. Engine bearings and thrust washers must be ordered separately. (Item #: 130845, Ref: BEKP2467-LCB) $345.00

Basic Overhaul Kit, Perkins 203 Diesel - 203 CID 4 cylinder diesel engines, 3.6" standard bore, injectors at angle in cylinder head. For engines SN# prior to 2939036 Basic Engine Kit. Contains CHROME sleeves, .040" flange thickness, pistons and rings, pins and retainers, pin bushings, gasket sets, and crankshaft seals. For 356, MF65. Bearings and thrust washers must be ordered separately. Please see "engine bearings". (Item #: 183964, Ref: BEKP1464D-LCB) $537.00

Basic Overhaul Kit, Perkins 203 Diesel - 203 CID 4 Cylinder Diesel, 3.6 inch standard bore, injectors vertical in head. Basic Engine Kit. Contains CAST sleeves, .040 inch flange thickness, pistons and rings, pins and retainers, pin bushings, complete gasket set and crankshaft seals. Used prior to engine serial number 2820092. For tractor models 356, MF65. Engine bearings and thrust washers must be ordered separately. Please see "engine bearings". Kit is supplied with "Cast" sleeves which replace the original Chrome sleeves. Chrome sleeves are available at additional cost. (Item #: 183966, Ref: BEKP1465D-LCB) $514.00

Basic Overhaul Kit, Perkins 203 Diesel - 203 CID 4 cylinder diesel engine, 3.6 inch standard bore, injectors vertical in cylinder head. For engine serial number 2820092 and up. Basic Engine Kit. Contains CAST sleeves .150 inch flange thickness, pistons and rings, pins and retainers, pin bushings, gasket sets and crankshaft seals. For 356, MF65. Bearings and thrust washers must be ordered separately. Please see "engine bearings". (Item #: 130846, Ref: BEKP1466D-LCB) $372.00

Basic Overhaul Kit, Perkins 203 Diesel - This Engine Kit is for 203 CID 4 Cylinder Diesel Engine, 3.6 inch standard bore, injectors at angle in cylinder head. For engine serial number 2939036 to 29C108. Basic Engine Kit. Contains CAST sleeves, .150 inch flange thickness, pistons and rings, pins and retainers, pin bushing, gasket sets, and crankshaft seals, rear seal is a two piece rope type. This kit contains 5 ring pistons with combustion chamber. For 300, 302, 304, 3165, 356, MF165, MF65. Bearings and thrust washers must be ordered separately. Please see "engine bearings". (Item #: 130845, Ref: BEKP1467D-LCB) $345.00

Engine In-Frame Kit, Perkins 203 Diesel - For tractor models 356, MF65 with engine serial number used prior to 2820092. Perkins A4-203 diesel, regular injection, injectors vertical in head, .040 inch sleeve flange thickness. Basic In-Frame Engine Kit includes: Sleeve and Piston Kit with Rings, Pins and Retainers, top engine set and Oil Pan Gasket. Kit is supplied with Cast sleeves which replace the original Chrome sleeves. Chrome sleeves are available at additional cost. (Item #: 184175, Ref: BIFP1465D) $380.41

Engine In-Frame Kit, Perkins 203 Diesel - For tractor models 356, 65. Perkins A4-203 diesel, regular injection, 3.6 inch standard bore, injectors vertical in cylinder head .150 inch sleeve flange thickness. For engines serial number 2820092 and up. Basic In-Frame Engine Kit includes: Sleeve and Piston Kit with Rings, Pins and Retainers, top engine set and Oil Pan Gasket. (Item #: BIFP1466D) $317.19

Engine In-Frame Kit, Perkins 203 Diesel - Perkins AD4-203 diesel, direct injection, .040 inch sleeve flange thickness. For engine serial number prior to 2939036. Basic In-Frame Engine Kit includes: Sleeve and Piston Kit with Rings, Pins and Retainers, top engine set and Oil Pan Gasket. For tractor models 356, 65. (Item #: 189608, Ref: BIFP1464D) $505.00

Engine In-Frame Kit, Perkins 203 Diesel - For tractor models 300, 356, 302, 304, 3165, 65, 165, MF255. Perkins AD4-203 diesel, direct injection, .150" sleeve flange thickness. Basic In-Frame Engine Kit includes: Sleeve and Piston Kit with Rings, Pins and Retainers, top engine set and Oil Pan Gasket. (Item #: 184510, Ref: BIFP1467D) $493.30

Engine Overhaul Kit, Perkins 203 Diesel - For tractor models 300, 356, 302, 304, 3165, 65, 165 with engine serial number 2939036 to 29C1084 using AD4-203 Direct Injection Perkins Diesel with injectors at angle in cylinder head and engines using 2 piece rope type rear seal and with .150 flange wall thickness. Basic Engine Overhaul Kit. Contains Sleeve and Piston Kit: sleeves, pistons, rings, pins and retainers. Pin Bushings. Complete Gasket Set. Engine Bearings and thrust washers must be ordered separately. Please see "engine bearings". (Item #: 130865, Ref: EOK1467D-LCB) $439.00

Engine Overhaul Kit with Crankshaft - For Perkins A4-203 Regular (Indirect) Injection, this comprehensive overhaul kit includes Flat Top Pistons, Pins, Pin Bushings, Chrome Sleeves (0.040 inch deep flange), Overhaul Gasket Set, Crankshaft Seals, Thrust Washers, New Crankshaft, and Main and Rod Bearings. This engine was used in Massey Ferguson 65 Tractor and 356 industrial up to engine serial number 2820092 (Item #: 183981, Ref: EKMC106) $1299.01

Engine Overhaul Kit with Crankshaft - For Perkins A4-203 Regular (Indirect) Injection, this comprehensive overhaul kit includes Flat Top Pistons, Pins, Pin Bushings, Cast Sleeves (0.150 inch deep flange), Overhaul Gasket Set, Crankshaft Seals, Thrust Washers, New Crankshaft, and Main and Rod Bearings. This engine was used in Massey Ferguson 65 Tractor and 356 industrial engine serial number 2820093 and up. 3.600 inch bore. (Item #: 183976, Ref: EKMC107) $1419.01

Engine Overhaul Kit with Crankshaft - For Perkins AD4-203 Direct Injection (injectors at an angle in the head), this comprehensive overhaul kit includes Bowl Top Pistons 3.6 inch Bore, Pins, Pin Bushings, Chrome Sleeves (0.040 inch deep flange), Overhaul Gasket Set, Crankshaft Seals, Thrust Washers, New Crankshaft, and Main and Rod Bearings. This engine was used in Massey Ferguson 65 Tractor and 356 industrial to Engine Serial number 2939035 (Item #: 183986, Ref: EKMC12) $1479.01

Engine Overhaul Kit with Crankshaft - For Perkins AD4-203 Direct Injection (injectors at an angle in the head), this comprehensive overhaul kit includes Bowl Top Pistons 3.6 inch Bore, Pins, Pin Bushings, Cast Sleeves (0.150 inch deep flange), Overhaul Gasket Set, Crankshaft Seals (two piece rope type rear seal), Thrust Washers, New Crankshaft, and Main and Rod Bearings. This engine was used in Massey Ferguson 65 Tractor and 356 industrial from Engine Serial number 2939036. Used on 165, 302, 304, 3165 up to Engine Serial number 203UA109488 (Item #: 183985, Ref: EKMC13) $1439.01

Overhaul Kit, Perkins 203 Diesel - 203 CID 4 cylinder diesel, 3.6" standard bore, injectors at angle in cylinder head. For engines SN# prior to 2939036. Engine Overhaul Kit. Contains CAST sleeves, for replacing original CHROME sleeves (flange thickness.040"), pistons and rings, pins and retainers, pin bushings, gasket sets, crankshaft seals, intake and exhaust valves, valve keys, guides, springs, and retainers. For tractor models 356, MF65. Bearings and thrust washers must be ordered separately. Please see "engine bearings". (Item #: 186369, Ref: EOK1464D-LCB) $715.00

Valve Overhaul Kit, Perkins 203 Diesel - Valve Overhaul Kit. Contains intake and exhaust valves, springs, keys and guides. For tractor models 300, 302, 304, 30, 3165, 356, 40B, 50, MF165, MF255, MF65. (Item #: VOKP203A) $98.22

No
Picture
Valve Train Kit, 203 Diesel - Fits 4.203 4 cylinder diesel engines. For tractor models 356, 65. (Item #: 120308, Ref: VTK404) $114.00

Engine Parts

Bushing, Connecting Rod - FOR AD3.152 Perkins Diesel. Replaces 740407M1, 740407V1, 731087M1, 0050119, 31134151, 00505353, 81803978, 31134151 80505353, 296149A1, 957E6207 (Item #: 128688, Ref: 957E6207A) $2.70

Camshaft - Camshaft for Continental G176 gasoline engine. Used in tractors: 65, 165; Industrials: 356, 3135, 3165. Replaces 1753789M1 (Item #: 187167, Ref: 1753789M91) $360.00

Connecting Rod - Verify casting number 0210007. For tractor models (135, 150, 20, 200, 203, 205, 2135, 220, 2200, 2244, 230, 235, 2500, 34B, 35, 356, 40, 50 with engine serial number ending in D, DL or DSL), 65. Has 9 inch CENTER TO CENTER measurement. (IF NEEDING 8.875 inch CENTER TO CENTER, ORDER PART NUMBER ZZ90010). Replaces: M7BJ0052, VPB6000, 3637439M91, 3637439V91, 52813, 59908, 731676M91, 735391M91, 747010M91, 747101M91, 81803971, 957E6200. (Item #: 173358, Ref: ZZ90011) $75.00

Connecting Rod - Verify casting number 31337220. For tractor models (365, 65 all engine serial number 2939035 not ending with DL), (165, 255, 30, 300, 302, 3165, 356, 40B, 50, ALL engine serial number 29C1085), 304 engine serial number 2939036-29C1084, (20C, 235, 245, 30B ALL engine serial number ending in DS), 250 engine serial number ending in DSL, 40 Industrial with AD3.152 and AT3.152 engines, (135, 148, 20B, 20D, 20E, 20F, 230, 240, 250, 253, 254, 254S, 255, 30E, 30H, 350, 353, 355, 360, 363, 40E, 550 ALL with AD3.152 and AT3.152 engines), (155, 158, 165, 260, 560, 65, 765 ALL with AD4.203 engine). 8.875 Inch CENTER TO CENTER (IF NEEDING 9 Inch CENTER TO CENTER, ORDER NUMBER ZZ90011). Replaces: M7BJ0014, VPB6001, 31337220, 3637392M1, 3637392M91, 736386M91, 740596M91, 747008M91, 84774. (Item #: 123607, Ref: ZZ90010) $74.00

Crank Gear - For tractor models 165 serial number 2939036-29C1084, 165 serial number 29C1085>, 255 serial number 2939036-29C1084, 255 serial number 29C1085>, 30 serial number 29C1085>, 300 serial number 2939036-29C1084, 300 serial number 29C1085>, 302 serial number 2939036-29C1084, 302 serial number 29C1085>, 304 serial number 2939036-29C1084, 304 serial number 29C1085>, 3165 serial number 2939036-29C1084, 3165 serial number 29C1085>, 356 serial number <2820092, 356 serial number 2820092>, 356 serial number 2939036-29C1084, 356 serial number 29C1085>, 365 serial number <2939035 NOT ENDING with DL, 40B serial number 29C1085>, 50 serial number 29C1085>, 65 serial number <2820092, 65 serial number <2939035 NOT ENDING with DL, 65 serial number 2820092>, 65 serial number 2939036-29C1084, 65 serial number 29C1085>. Replaces 731074V1, 731074M1, 731074M1, 0410228 (Item #: 0410228) $18.01

Crankshaft - Crankshaft using rear rope type seal. For Perkins diesel A4-203 and AD4-203. For 300, 302, 304, 30, 3165, 356, 50A, 50, MF165, MF255, MF65. Order bearings seperately. ***Additional $20.00 shipping due to weight. *** (Item #: 102115, Ref: 3638473M91) $394.00

Crankshaft - Keyed nose, lip seal. For tractor models (65, 165, 255, 302, 304, 3165, 356, 300 all with D4.203 or 4.203 engines SN# 29C1085 and up). Replaces ZZ90111, 94454, 94455, 3637458M91, 742344M91 (Item #: 102116, Ref: 3637458M91) $251.98

Crankshaft, G176 - For tractor models 65, 165, 302, 304, 356, 3165. Crankshaft for G176 engine. Replaces: G176C300, 830756M91 (Item #: 102114, Ref: 830756M91) $1175.01

Valve, Exhaust - Exhaust valve for engines 152, 203 or 305 CID diesel in models 203, 205, 35, 356, FE35, MF35, MF50, MF65, Super 92. (Item #: 166347, Ref: 731152M1) $5.90

Valve, Exhaust, Perkins 152 and 203 Diesel - Fits 152 and 203 CID diesel engines, 3.6 inch standard bore, injectors at angle in cylinder head. For tractor models 200, 2244, 2200, 2500, 203 and 205 tractor serial number 659002115 and up, 20, 40, MF135, MF150, MF235, MF230, 4500, 300, 356, 302, 304, 3165, 65, 165. (Item #: 166347, Ref: 737640M1) $5.90

Valve Guide, Perkins Diesel - Intake and exhaust. 152 CID and 203 CID perkins diesel engines. For tractor models 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. (Item #: 166914, Ref: 732445M1) $2.30

Valve, Intake - Intake valve for 152 or 203 CID diesel standard bore 3.6 inch, injectors vertical in head. For 203, 205, 35, 356, FE35, MF35, MF50, MF65, Super 92. (Item #: 167112, Ref: 731151M1) $4.71

Valve, Intake, Perkins 152 and 203 Diesel - Fits 152 and 203 CID diesel engines, 3.6 inch standard bore, injectors at angle in cylinder head. For tractor models 200, 2244, 2200, 2500, 203 and 205 tractor serial number 659002115 and up, 20, 40, MF135, MF150, MF235, MF230, 4500, 300, 356, 302, 304, 3165, MF65, MF165. (Item #: 166921, Ref: 732811M1) $5.50

No
Picture
Valve Overhaul Kit, Perkins 203 Diesel - Valve overhaul kit. 203 CID 4 cylinder diesel engine, 3.6" standard bore, injectors vertical in cylinder head. Contains intake and exhaust valves, springs, keys, and guides. For 356, MF65 (Item #: VOKP203) $126.09

No
Picture
Valve Service Kit, Perkins 203 Diesel - 203 CID 4 Cylinder Diesel Engine, 3.6 inch standard bore, injectors at angle in cylinder head. For tractor models 300, 302, 304, 30, 3165, 356, 40B, 50, MF165, MF255, MF65. Contains: springs, guides, locks, (no valves). (Item #: 131552, Ref: VSKP203) $140.00

Valve Spring Cap - Used on many Perkins Engines, this Valve Spring cap replace: 747697M1, 731156M1, 957E6514, 747697M1, 747697V1, 747697V1, 33423148. (Item #: 191058, Ref: 747697M1) $19.20

Valve Spring, Inner, Perkins - Intake and exhaust. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines 3.6 inch standard bore. Price shown is for each. \For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. (Item #: 166791, Ref: 731153M1) $1.98

No
Picture
Valve Spring, Outer, Perkins - Intake and exhaust. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines 3.6 inch standard bore. Price shown is for each, sold only in multiples of 2 items. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 3356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. (Item #: 731154M1) $2.81

Valve Spring Retainer, Perkins Diesel - Fits 152 CID and 203 CID perkins engines. For tractor models 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. Price shown is for each, sold only in multiples of 2 items. (Note: 2 halves = 1 retainer) (Item #: 180600, Ref: 731959M1) $4.60

Valve Spring Seat, Lower - Used on Perkins engines: AD3.153, A3.152, T3.152, AD4.203. A4.203. Replaces Massey Ferguson 736185M1, Ford E39CP9, Allis Chalmers 72080049, Perkins 33415133 (Item #: 166885) $15.00

Engine Pistons and Sleeves

No
Picture
Piston, Flat Head, Perkins 152 or 203 Diesel - Piston with pin, flat head. For 152 or 203 CID Perkins Diesel Engines (standard 3.6 inch bore) in TRACTORS: 203, 205, 356, 35, FE35, MF35, MF50, MF65, Super 92. (Item #: 128657, Ref: 734460M91) $30.80

Piston Pin Bushing - Fits 152 CID 3 Cylinder and 203 4 Cylinder Gas or Diesel Engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, 356, MF65, 300, 302, 304, 3165, MF165, 30, 40B, 50, MF255.740407M1 (Item #: 128688, Ref: 957E6207A) $2.70

Piston Sleeve, Perkins 152 and 203 Gas or Diesel - Sleeve, CAST, replacing original CAST sleeve 734175M1, flange thickness .150 inch. Fits 152 CID 3 Cylinder and 203 CID 4 Cylinder Gas or Diesel Engines 3.6 inch standard bore. For tractor models 2500, 20, 40, MF135, MF150, 35, 203, 205, FE35, MF35, MF50, 200, 2244, 2200, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, MF255, 40B, 50. (Item #: 128601, Ref: 739043M1) $23.10

No
Picture
Sleeve and Piston Kit, Perkins 203 Diesel - Sleeve and Piston Kit. For engine serial number prior to 2939036, Injectors at an angle in Cylinder Head. Contains CAST sleeves, for replacing original style chrome sleeves, flange thickness, 040 inch, piston and rings, pin and retainers. For 356, MF65. (Item #: PK464D) $321.42

No
Picture
Sleeve and Piston Kit, Perkins 203 Diesel - Sleeve and Piston Kit for 356, 65 with AD4-203 Direct Injection, injectors at an angle in cylinder head, Perkins Diesel Engine with chrome sleeves used prior to serial number 2939036. Sleeve and Piston Kit includes original chrome sleeves, pistons and rings, pins and retainers. Flange thickness .040 inch. Sleeves NOT available separately. (Item #: PK463DC) $408.81

No
Picture
Sleeve and Piston Kit, Perkins 203 Diesel - Sleeve and Piston Kit for (65 and 165, both serial number 2939036 and up), (255 with serial number 29C1084 and up), all with AD4-203 Regular Injection, injectors at an angle in cylinder head, Perkins Diesel Engine with cast sleeves. Sleeve and Piston Kit includes sleeves, pistons and rings, pins and retainers. Flange thickness of .150 inch. (Item #: 167206, Ref: PK467D) $69.00

No
Picture
Sleeve, Perkins 152 Diesel - For AD3.152 Perkins Diesel. Price is per sleeve. Flange is (.150 inch). With engine serial number less than 2820092. Replaces 31358345, 1434175M1, 31358345, 734175M1, 739043M1, 2130002, 28057, 31358322, 72080003. (Item #: 128601, Ref: 739043M1) $23.10

No
Picture
Sleeve, Perkins 152 or 203 Diesel - Sleeve, CAST, for replacing original CHROME sleeve. Flange thickness .040 inch, standard bore 3.6 inch. For 203, 205, 356, 35, FE35, MF35, MF50, MF65, Super 92. (Item #: 128654, Ref: 732638M-CST) $37.00

Sleeve Seals, Pack of 2 - Pack of 2. O-ring for Piston Liner Sleeve. (NOTE: Sleeves usually use a minimum of 2 O-rings each). Use on Ferguson, Massey Harris and Massey Ferguson tractors with Z120, Z129, Z134, Z145, and G176 engines. Replaces 1750000M1 (Item #: 128575, Ref: 1750000M1) $9.40

Engine Rings

No
Picture
Piston Ring Set - Fits D4.203 and 4.203 4 Cylinder Diesel Engines. For tractor models 135 engine serial number ending in D, 135 engine serial number ending in DL, 150 engine serial number ending in D, 20, 200 engine serial number ending in D, 203, 205, 20C engine serial number ending in DS, 2135 engine serial number ending in D, 2200 engine serial number ending in D, 2244 engine serial number ending in D, 230 engine serial number ending in D, 230 engine serial number ending in DL, 235 engine serial number ending in D, 235 engine serial number ending in DL, 235 engine serial number ending in DS, 245 engine serial number ending in DS, 2500 engine serial number ending in D, 30B engine serial number ending DS, 35, 356 engine serial number 2820092>, 365 engine serial number <2939035 not ending with DL, 40, 50, 65 engine serial number <2939035 not ending with DL, 65 engine serial number 2820092>. (Item #: 120667, Ref: 836325M91) $12.30

No
Picture
Piston Ring Set, 1 Cylinder, Perkins 152 or 203 Diesel - 152 or 203 CID diesel engine standard bore 3.6 inch. Ring set, for 1 piston, used with CAST sleeves only. For 20, 200, 200B, 203, 205, 2135, 2200, 2244, 2500, 30, 300, 302, 304, 3165, 35, 356, 40, 40B, 4500, 50, FE35, MF135, MF150, MF165, MF230, MF235, MF250, MF255, MF35, MF50, MF65, Super 92. Set includes 2 at 3/32 inch, 1 at 1/8 inch, 2 at 1/4 inch. (Item #: 120667, Ref: 836325M91) $12.30

Piston Ring Set, Single Cylinder - 203 CID 4 Cylinder Diesel Engine, 3.6 inch standard bore. Ring set, use with CHROME sleeves. For 356, MF65. 2 at 3/32 inch, 1 at 1/8 inch, 2 at 1/4 inch. 4 used for complete 203 4 cylinder engine. Sold individually. (Item #: 128871, Ref: PRS462DC) $14.40

Exhaust System

Manifold - For 302, 304, 356, 65. Exhaust Manifold for 4 cylinder direct injection diesel engines only. Horizontal mounting flanges. (Item #: 111694, Ref: 732813M1) $95.00

Fuel System / Air Intake

Air Cleaner Oil Cup - Cup is 5 3/4 inches O.D. at the lip. For clamp style air cleaners, not clip style. Replaces 1001012M91, 10P1146, 10P931, 1754014M1, 1K-6054, 1K-6054, 311510, 362974R91, 375550R91, 378333R1, 52864DA, AB1626R, AB3477R, AM3172T, AM465T, AM468T, AT10592, G46325 (Item #: 108775, Ref: AB1626R) $32.60

Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carbs used on: 65, DX45, 150, 302 Replaces Marvel-Schebler numbers TSX884, TSX695, TSX947SL, TSX856, TSX772, TSX843, TSX939, TSX959. Also replaces OEM number 184301M91. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA, 1 year warranty. (Item #: 100752, Ref: 14996) $465.00

Carburetor - With reversible linkage. This Zenith Style Carburetor outperforms the original carbs used on: 65, DX45, 150, 302 Replaces Marvel-Schebler numbers TSX884, TSX695, TSX947SL, TSX856, TSX772, TSX843, TSX939, TSX959. Also replaces OEM number: 184301M92, 190383M92, 191494M91, 194603M1, 194603M92, 194996M93, 770079M91 . Center to center on the 2 mounting bolts is 2 11/16 inches. 1 year warranty (Item #: 183805, Ref: 14996B) $310.00

Fuel Cap, Vented - Fuel Cap INTERNAL LOCK TANGS 2.7 inch OD, 1.78 inch overall tab length, 0.250 inch tab width. This silver cap is for models: Pony, Pacer, TE20, TO20, TO30, 35, F40, 50, 65, 85, 88, 90, 135, 150, 165, 175, 1080, 1100, 1130, 1150, 1500, 1800, 202, 203, 204, 205, 302, 304, 356, 2135, 3165. Replaces 850493M1, YTO 520948M91. Verify OEM number to ensure fit. (Item #: 184806) $9.00

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. For tractor models (1100 serial number up to 8838067), (1130 serial number up to 88T0173), (135 serial number 9A10311 and up), (150 serial number 9A24714 and up), 165, 175, 180), (35 serial number 240398 and up), (35 Turf, 35 Utility both serial number 655000484 and up), (50 serial number 535223 and up), (65 serial number 697565 and up), (Super 90 serial number 6906208 and up), (2135 Utility and Turf serial number up to 9A10311), (300 serial number up to 29E7574), (410 serial number up to 6909990), (510 serial number 8823113 Thru 8838). (INDUSTRIAL/CONSTRUCTION: 20, 203, 205, 2200, 2500, 30, (302 serial number 119700021 and up), (304 serial number 119750021 and up), 31, 3165), 40), 50, 50A). Replaces original part numbers 1447072M91, 1876507M91, 193229M91, 193239M91, 3597838M91, 883786M91. Replacement filter for this unit is CAV7111296. (Item #: 153129, Ref: 1446017M91) $26.40

Fuel Injection Pump, Remanufactured, CAV - Lucas, DPA3240F968, 1447158M91 - For Massey Ferguson tractor models 50, 65, 304, 356, Replaces Massey Ferguson OEM number 1447158M91, 883596M91, Replaces CAV - Lucas manufacturer number DPA3240F968, DPA3240F938, (Item #: 209985) $1350.01

Fuel Injector - For tractor models: 203, 205, 20, 2135, 302, 304, 3165, 356, MF135, MF150, MF165. Marked "UB", Perkins ref# 2645732. Replaces 734596M91. NOTE: Most tractors used different injectors at different times of production. Verify OEM numbers before ordering. (Item #: 115681, Ref: 734596M91) $60.00

Fuel Pump - Fuel Pump for AD4-203 Diesel Engine, two-hole mounting, glass bowl. Tractors: MF65, MF165 (prior to serial number 29F4249). Industrials: 302 and 304 (prior to serial number 29F4249), 3165 (prior to serial number 29F4249). Fuel pump with 2 mounting hole with sediment bowl. Replaces 2641A065, 2641345, 4222452M91, 890955M91, 892630M91. (Item #: 123318, Ref: 3637338M91) $34.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 180060M1. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Sediment Bowl Assembly - Strainer assembly, for GAS tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65, MF85, MF88 industrials: 35, 202 to serial number 309328, 204 to serial number 343891, 302 to serial number 119700213, 304 to serial number 119750210, 356 to serial number 670001084. The fuel bowl assembly has a 3/8 inch NPT male inlet and 1/4 inch pipe thread (7/16 -24) female outlet, 1-1/4 inch long bowl. Replaces OEM numbers 0236986, 180141V91, 193995M91, 193995M92, 193995V92, 180141M91, 632948M92. (Item #: 105381, Ref: 2NAA9155B) $14.00

Sediment Bowl Assembly - Sediment bowl. Fits tractor models MH44, MH20, MH22, MUSTANG, MH30, MH33, MH55, MH81, MH82, 50, 165, 180, 135, 150, 175, 202, 204, 302, 304, 2135, 3165, 30, 20, 356. Replaces OEM Part Number 505475M91, 505472M91. Replacement bowl available as part S.65504. (Item #: 105393, Ref: S.61581) $22.00

Sediment Bowl Assembly Glass Bowl - Glass bowl fits S.61581 sediment bowl. Top of bowl outside diameter is 2 1/8. For tractor models 50, 165, 180, 135, 150, 175, 202, 204, 302, 304, 2135, 3165, 30, 20, 356. (Item #: 105365, Ref: S.65504) $6.10

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 12080G (Item #: 105364, Ref: 49923D) $3.30

Hydraulic System

Draft Control Boot - Draft Spring Rubber Boot. Fits Multiple Massey Ferguson Models. Replaces 1660439M1, 887654M1, 887654M2. (Item #: 169245, Ref: 887654M1) $3.10

No
Picture
Hydraulic Pump Kit, MK III, 25 mm - For Massey Ferguson tractor models 133, 135, 140, 148, 150, 158, 165, 168, 174, 175, 178, 184, 185, 188, 194, 230, 231, 233, 234, 235, 240, 243, 245, 250, 253, 254, 255, 260, 261, 263, 265, 265S, 273, 274, 275, 283, 284, 285, 285S, 290, 294, 298, 340, 342, 350, 353, 353LX, 355, 356, 360, 362, 363, 364, 364S, 365, 372, 373, 374, 374S, 375, 377, 382, 383, 384, 384S, 387, 390, 390T, 393, 394, 394S, 396, 397, 398, 399, 440, 550, 560, 565, 575, 590, 592, 595, 675, 690, 698, 699, 1200, 1250, 4225, 4235, 4240, 4245, 4260, 4265, 4270, 4315, 4325, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 20B, 20D, 20E, 30D, 30E, Replaces Massey Ferguson OEM number 1810860M93, 1810860M92, Mark III Pump, 25 mm, (Item #: 168738) $214.50

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.60

Lights

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $14.50

Oil System

Dipstick - Dipstick for oil is 7 inches in length. Models using Perkins A3-152, AD3-152, A4-203 and AD4-203 engines. Also replaces 31786412. For tractor models DT5500, 135, 148, 150, 154-4, 1545, 158, 20, 202, 203, 205, 20C, 20D, 2135, 230, 231, 235, 240, 245, 250, 253, 254-4, 255, 30, 300, 302, 304, 30B, 30D, 3165, 35, 350, 356, 360, 40, 40B, 4500, 4830FC, 50, 50A, 550, 5830, 5830FC, 5860, 5870, 6030FC, 6070, 65, 765. (Item #: 121771, Ref: 731117M91) $7.70

PTO / Driveline

Rear Drive Shaft PTO - For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75 inches long, 10/18 splines. Replaces 886548M1. (Item #: 886366M91) $178.34

Steering

Bearing, Thrust Spindle - Bearing, Thrust Spindle. 1 1/2 Inch Inside Diameter, 2 19/32 Outside Diameter, 5/8 inch Wide. Replaces 1860036M3, 1868732M1, 196167M1, 3611413M1, 3599263M1 (Item #: 102474, Ref: 196167M1) $11.50

Front Axle Pivot Support - Replaces casting number 186069M1. For tractor models 150, 165, 302, 304, 356, 40, 50, 65. (Item #: 126511, Ref: 506913M91) $112.00

Power Steering Pump - Helical cut gear, 13 teeth, replaces Parker Hannifin. For 4 cylinder tractors: 65 diesel serial number 685996 and up, 165 diesel, MF255 gas (serial number 9A287064 and less). Industrials: 40B, 50A (serial number 9A113166 and above); diesels: 30, 302, 304, 356, 3165. Replaces 188772M92 and 518633M91. (Item #: 111837, Ref: 523090M91) $246.00

$Massey Ferguson 356 Spindle Bushing\Bearing\Seal Kit$
Spindle Bushing/Bearing/Seal Kit - Kit includes (2) 196167M1 thrust bearings, (4) 183086M1 bushings, and (2) seals. For tractor models 135, 165, 168, 178, 185, 188, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 3165, 356, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 290HD, MH50 (Item #: 104972, Ref: 196165M1) $30.00

Steering Column Grommet - Verify Measurements: 1 3/8 inch inside diameter, 2 3/8 inch outside diameter. For tractor models TO35 (serial number 154616-204180), 25, F40, 50, 65, 85, 88, 90, 356, 10, 12, 14. (Item #: 126706, Ref: 180575M1) $15.00

Steering Wheel - For TO20, TO30, TO35, 35, 135, F40, 50, and 65. 17-3/4 inch diameter, 3/4 inch hub with 3/16 inch keyway. Covered Metal Spokes. (41486S) (Item #: 122474, Ref: 180576M1) $24.30

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.50

Steering Wheel - Original Type - For tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 135, 50, 65, 2135. 17-3/4 inch diameter, 3/4 inch hub with 11/16 inch keyway. Metal Spokes. (Item #: 101418, Ref: 180576M1-OE) $27.00

Tie Rod End - A= 7.50 inch, B= 1.00 inch, right hand thread. For tractor models 2500, (302, 304 serial number 11970021 and up), (356 serial number 670001371 and up), 50, 50A, 50C, 50D, 6500. (Item #: 105048, Ref: 193821M1) $92.00

Tie Rod End, Front - Drag link end assembly, front. 3.75 inch to center of post, .812 inch-16 right hand thread. For drag links with adjustable end. For tractors: F40, MH50, MF50, MF65, MF135 Orchard, Deluxe and Special, MF150, MF165, MF175 industrials: 20, 35 utility, 202, 203, 204, 205, 356 tractors. Replaces: 182534M1, 182534V91, 847451M91, 884701M92 (Item #: 102503, Ref: 182534M91) $14.00

Tie Rod Tube - 31.38 inches long, 1.250 inch outside diameter. For tractor models 302, 50, 50A, (356 with shovel blade or for lift). (Item #: 105044, Ref: 193820M1) $88.51

No
Picture
Valve Adjustment Screw - This front axle valve adjustment screw is 3.9 inches long and is .750 diameter. For models 356, 150, 165, 168, 175, 178, 188, 265, 275, 282, 285, 290, 50, 65. (Item #: 165262, Ref: 182725M1) $11.30

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.00

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.50

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.10

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.80

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.80

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.30

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $73.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $21.10

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $29.90

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $29.00

$Massey Ferguson 356 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Massey Ferguson 356 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Massey Ferguson 356 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Ferguson 356 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Massey Ferguson 356 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Massey Ferguson 356 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Massey Ferguson 356 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.20

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$Massey Ferguson 356 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.00

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.48

Drawbar - Number Of Drawbar Holes: 11 Hole``Made of 1" x 2-1/2" high carbon steel``Category: 1``Length: 26"``End Pins: 7/8"``Hitch Pin Holes - 3/4" (Item #: 103174, Ref: 180485M1) $44.30

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $77.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $86.02

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $67.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $85.44

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $91.00

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $92.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $29.90

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $98.07

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $71.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $71.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $263.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.95

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $119.41

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $148.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $907.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1109.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $71.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $313.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $103.00

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $106.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $410.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $55.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $72.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $26.20

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $63.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $81.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $33.10

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $12.50

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $56.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $21.70

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.50

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $54.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $20.40

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.30

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $129.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $63.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $11.00

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $93.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $2.98

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $53.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $143.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $164.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $150.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00