Brake Lining - Set of 4 Shoe Linings with 40 rivets. For tractor models 720, 730, 80, 820, 830 all except hi-crop. (Item #: 105621, Ref: AF2866R)$38.00
No Picture
Brake Lining Kit - Brake shoe lining kit. Set of 4 with rivets. For 720, 730, 730D, 820, 830 except Hi Crop models. For 720, 730, 820, 830 (Item #: 105621, Ref: TP-AF2866R)$38.00
Brake Pedal Bushing - This bushing measures 0.690 inside diameter, 0.750 inches outside diameter, and is 1.215 inches long. For the following models: 820 (3cylinder), 830 (3cylinder), 1020, 1030, 1520, 1530, 1630, 2020, 2030, 2040 (serial number 430000 and up, 2040 (Utility serial number 350000 and up), 2130, 2150, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520. (Item #: 126142, Ref: B177R)$9.00
Brake Plate - 12 teeth, 12.00" O.D.. For tractor models 1020, 1520, 1530, 2020, 2030, (2040 SN# up to 305839), (210C SN# 747742 and up), (2240 SN# up to 305313), (2440 SN# up to 340999), 300B, 820, 830. Replaces AT26290, AT22034. (Item #: 114741, Ref: AT63106)$99.00
Brake Plate - 12.044" O.D., 8.663" I.D.. For tractor models 820, 830, 1020, 1520, 1530, 2020, (2030 SN# up to 187300), (2040 SN# up to 305839), (2240 SN# up to 305313). T38063, T46728. (Item #: 122116, Ref: L31016)$109.00
Brake Plate, Used - For John Deere tractor models 820 (s/n 027501-088862), 920 (s/n 027501-088862), 1020, 1120 (s/n 027501-088862), 1520 (s/n 183299-earlier), 2020, 2120 (s/n 088862-earlier), Replaces John Deere OEM number AT26289, O.D.: 12.044", I.D.: 8.663", For a new version of this item use Item #: 122116, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498777)$69.00
Brake Shaft Seal - Used as a brake shaft seal. The width of the seal measures 0.350 inch, 1.750 inches I.D., and an O.D. of 2.254 inches. Replaces AR1587, AR1587R. For the following 2 cylinder tractors: 820, 830. (Item #: 152783, Ref: 195503M1)$4.30
No Picture
Brake Shoe Lining Kit - For 720, 730, 730D, 820, 830. Except Hi Crop Models. Contains 4 linings and rivets. Used to relign brake shoes (Item #: 105621, Ref: TPAF2866R)$38.00
Brake Shoes, Set of 2 - This is a Riveted Brake Shoe Assembly (2-piece set). 1 Pair is for 1 wheel only. Two sets required per tractor. Overall outer curved length: 12-1/4 inches, Lining length: 11-5/8 inches, Width: 2-1/4 inches, Used one 730 both gas, LP, diesel Row-Crop and Standard, 720 both gas, LP, diesel, Row-Crop and Standard, 820 2 cylinder, 830 2 cylinder, 840. Replaces John Deere part number AF2789R. (Item #: 164549, Ref: AF2789R)$128.57
Clutch Disc, Remanufactured, AT24855 - For John Deere tractor models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 301, 302, 400, 401, Replaces John Deere OEM number AT24855, AT32207, AR66923, R66923HD6, Clutch Size: 11", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Solid, Clutch Type: 6 Reg Pads, For a New version of this sku use Item #: 184538, (Item #: 205770)$167.50
Clutch Disc, Remanufactured, AT32207 - For John Deere tractor models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 400, 401, 401A, 401B, 401C, 401D, Replaces John Deere OEM number AT32207, AT24855, AR66923, R66923HD4, Clutch Size: 11", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Solid, Clutch Type: 4 Reg Pads, For a New version of this sku use Item #: 135027, (Item #: 205769)$131.00
Clutch Disc with Lining - The measurements on this disc are 9.250 inches outside diameter, 0.372 inches thick, 3 5/8 inch diameter holes to slide over the R1869R pins. When assembling, the discs slide OVER the pins NOT the T-bolts. Used on John Deere R, 80, 820, 830 and 840 2 cylinder tractors. 2 or 3 are used depending on the model. Replaces John Deere part numbers AR1052R, AR403R, RE29785 (Item #: 187023, Ref: RE29785)$102.00
No Picture
Clutch Disc with Lining - Bonded - For John Deere tractor models R, 80, 820, 830, Replaces John Deere OEM number RE29785, AR1052R, Inside Diameter: 5.480:, Outside Diameter: 9.230", (Item #: 173273)$109.00
Clutch Fork, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040 (s/n: 349999-earlier), 2130, 2150, 2155, 2240 (s/n: 349999-earlier), 2350, 2355, 2440, 2630, 2640, 3030, 3120, 3130, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 655, 655B, 750, 750B, 755, 755A, 755B, 850, 850B, 855, Replaces John Deere OEM number T21999, For a new version of this item use Item #: 173105, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442726)$66.01
Clutch Handle Bushing - Used with D2031R Clutch Handle Pivot Bolt, this bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Replaces A1197R and R51192 Use on 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. (Item #: 126143, Ref: A1197R)$9.50
Clutch Handle Pivot Bolt - The measurements on this Clutch Handle Pivot Bolt 0.750 inches O.D. to 0.625 inches O.D. 4-1/4 inches length. Replaces D2031R and R121197. Used on John Deere 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. Uses Bushing A1197R (Item #: 114893, Ref: D2031R)$20.80
No Picture
Clutch Kit - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 401, 401B, 401C, 401D, Replaces John Deere OEM number AL120022, AL39936, Replaces manufacturer number 6202-2RS, 6203-2RS, AG 28, N1171, Clutch Diameter - 11", Clutch Hub Diameter - 1", Clutch Splines - 15, Clutch Center - Solid, Clutch Type - 6 regular Pads, Pressure Plate Size - 11", Pressure Plate Levers - 3, Pressure Plate Springs - 6, Pressure Plate Hub Diameter - 1-1/2", Pressure Plate Splines - 23, Pressure Plate Type - Single Stage, Flywheel Step .795", (Item #: 135031)$540.00
Clutch Kit, 11 Inch Double - The 11 Inch double clutch is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1550, 1630, 2020, 2030, 2120, 2130, 2240, 2440, 2630, 2640, John Deere Construction and Industrials 300, 300B, 301, 301A, 302, 302A, 401, 401B, 401C, 401D. Includes AL120022 pressure plate (Flywheel Step - 2.200 Inch to 2.210 Inch) with PTO Disc (1.5 Inch 23 spline hub), 11 Inch rigid transmission disc (1 inch, 15 spline hub), Release Bearing, Pilot Bearing and Alignment Tool. Replaces 228002310, 328006110, 628-1411-10, 628141110, AL120017, AL120022, AL67525 (Item #: 135038, Ref: R27706N-RKIT)$840.00
Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models 80, (820, 830 2-cyl). (Item #: 126153, Ref: R1859R)$53.00
Clutch Release Throwout Bearing Carrier, Used - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2750, 2755, 2850, 2855, 2940, 2950, 2955, 3030, 3040, 3050, 3120, 3130, 3140, 3150, 3255, 3350, 3640, 3650, Replaces John Deere OEM number AL39541, For a new version of this item use Item #: 170550, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449538)$39.00
No Picture
Clutch Release Throw Out Bearing Carrier, Used - For John Deere tractor models 820 (3 cylinder), 830 (3 cylinder), 840 (With mid-PTO), 920, 930, 940, 1020 (European), 1030, 1040, 1120 (s/n 315197-later), 1130, 1140 (With mid-PTO), 1350 (With mid-PTO), 1530, 1630, 1640, 1750, 1830, 1840, 1850, 2020 (European), 2030 (European), 2040 (s/n 349999-earlier), 2120, 2130, 2150, 2155, 2240 (s/n 349999-earlier), 2255 (s/n 494049-earlier), 2350 (s/n 490745-earlier), 2355, 2840, 3030, 3120, 3130, Replaces John Deere OEM number AL30777, For a new version of this item use Item #: 121895, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447182)$75.00
Clutch Shaft, Used - For John Deere tractor models 820, 1020, 1030, 1120, 1130, 1530, 1630, 1830, 2030, 2130, 2150, 2155, 2350, 2355, Replaces John Deere OEM number T30791, Splines: 15/ 16, Length: 23 1/16", For a new version of this item use Item #: 173459, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434018)$191.01
No Picture
Clutch Unit, Remanufactured - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2355, 2440, 2450, 2550, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 401, 401B, 401C, 401D, Includes pressure plate with PTO disc and engine clutch disc only, Clutch Diameter: 11", Clutch Hub Diameter: 1", Clutch Splines: 15, Clutch Center: Solid, Clutch Type: 6 Pad, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: Belleville, Pressure Plate Hub Diameter: 1-1/2", Pressure Plate Splines: 23, Pressure Plate Type: Dual Stage, Flywheel Step 2.200"-2.210", For PIlot Bearing use Item #: 100013, Additional Handling and Oversize Fees Apply To This Item, (Item #: 203726)$618.00
Pressure Plate Assembly, Remanufactured, T25109 - For John Deere tractor models 301, 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2355, 2440, 2450, 2630, 2640, Compatible with John Deere Construction and industrial models 401, Replaces John Deere OEM number T25109, T27706, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-1/2", Pressure Plate Spline: 23, Pressure Plate Type: Dual Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 205826)$576.00
Pressure Plate Spring Washer - For John Deere tractor models A, B, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 840, I.D. 0.572, O.D. 0.937, Thickness 0.035, Steel Spring, (Item #: 126159)$3.30
Cooling System
Belt, Water Pump / Alternator - This belt is used on John Deere 300B, 2420, 1020, 1520, 1530 with Motorola Alternator, 2020, 2030 diesel, 2040 below serial number 349999, 2130, 2240 below serial number 340999, 2440, 820 3 Cylinder above serial number 75345, 830 3 Cylinder. It measures 0.688 inches wide by 49.25 inches. REC (Raw Edge Cogged) Polyester Cord. Replaces R97758, T20334 (Item #: 115444, Ref: R97758)$12.80
Fan, 4 Blade - Fan is 16.00" diameter with 1-1/2" pilot hole, mounting holes on 1-3/4" centers. For tractor models 1020, 1520, 2040, 2240, 820, 830, JD300, JD350, JD350B. (Item #: 108498, Ref: AT23180)$53.00
Gasket - For John Deere tractor models 80, 820, 830 (all Diesel), Replaces John Deere OEM number R1524R, (Item #: 160360)$7.30
Radiator - For John Deere 300 without Reverser, (301, 1020 both without Reverser or Hi-Lo Shift), (1120, 820, 920 all with serial number up to 75429). Radiator, complete. Core size: 17.062 inches High, 18.5 inches Wide. (Item #: 101871, Ref: AT20797)$336.00
Radiator - Core (the fin part) measures 13.6 in wide x 17.2 High. For 1020 (with hi-lo shift or reverser), 1030, 1120 (serial # 75430 and up), 1530, 2040 and 2240 (serial # up to 349999), 820, 830, 920 (serial # 75430 and up), 930. This radiator uses cap part number AT29054 and is not included. (Item #: 101746, Ref: AT20849)$245.00
Radiator Cap - For tractor models 50 SN# 5016616 and later, 60 Regular SN# 6030927 and later, 60 Standard SN# 6043000 and later, 70, 70 Diesel, 80, 420, 430, 435, 440, 520, 530, 620, 630, 720, 720D, 730, 730D, 820, 830, 840, 1010, 8020. Replaces AA5757R. Cap is 3 1/4 outside diameter, fitted for a 2 notch 2 1/4 inch radiator neck. (Item #: 109933, Ref: 400065)$22.10
Radiator Core - For John Deere tractor models 80, 820, 830, Core Only, Core Height: 21-1/2", Core Width: 19-1/2", Depth: 2-13/16", Top Header: 5-9/16" x 21-1/2", Bottom Header: 5-9/16" x 21-1/2", Rows: 4, Fins Per Inch: 7, 20 Bolt Holes per Header Plate, Top and Bottom Header Centered, (Item #: 119667)$504.00
No Picture
Radiator Core - Diesel - This radiator core is made of copper fins and a brass lockseam tube. The radiator core is 21.5 inches tall, 19 inches wide, 2 inches thick, and has a plate width of 5.562". This radiator core fits John Deere Tractor models 70, 720, 730, 80, 820, 830 all with Diesel engines. Does not come with gaskets. Radiator Gasket available as part number F661R. (Item #: 101897, Ref: AR1627R)$295.00
No Picture
Radiator Gasket Pair - Price is for 2 radiator core gaskets for models G, 70, 720, 730, 80, 820, 830. (Item #: 122463, Ref: F661R)$16.40
Radiator Gaskets - For John Deere tractor models G (Styled s/n 13000 - later), 70, 80, 720, 730, 820, 830, Replaces John Deere OEM number F661R, 5-1/2" x 21-1/2", 21 Bolt Holes, Material: Paper, Sold as set of 2, (Item #: 115348)$16.40
Transmission Oil Cooler - This Transmission Oil Cooler is used on 820, 920, 1020, 1120, 1520, 2020, 830, 1530, 2030, 2130, 2630, 940, 1040, 1640, 2040, 2240, 2440, 2640, 300, 400 where an Oil Cooler is used. It replaces original part numbers AR69398, AT165535, AT169229, AT77459 (Item #: 121811, Ref: AT20848)$340.00
Water Pump - Water pump with 1 groove, cast 5-inch diameter pulley. For diesel models: 820, 830, 1020, 1030, 1520, 2020, 2030, 2040, 2240 (prior to SN# 349999), 2440. Replaces John Deere casting numbers R51039, R55758. (Item #: 150365, Ref: TP-AT27018)$156.00
Water Pump - For 820 and 830 2 cylinders, 80, 840. Comes with Pulley and Gasket. Replaces: AR1194R, Housing casting #: R1523R, Pulley casting #: R1526R, R1527R. Replaces AR1194R-R, AR1194R (Item #: 122068, Ref: R1527R)$147.00
Water Pump - For 80D, 820, 830, all 2 cylinder Diesels. Water Pump replaces casting #R1523R. Comes with gasket and pulley. (Item #: 122068, Ref: AR1194R-R)$147.00
No Picture
Water Pump Hub - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1830, 2020, 2030, 2040, 2120, 2130, 2155, 2240, 2355N, 2440, 2510, 2520, 2640, 5200, 5500, 5500N, Compatible with John Deere Construction and industrial models 300, 301, 301A, 302, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM number R30720, R122337, R23631, R23632, R29521, R48992, R48997, R51039, R55164, R59049, R65880, R67188, R97081, Hub is only for following water pumps: R122337, R23631, R23632, R29521, R48992, R48997, R51039, R55164, R59049, R65880, R67188, and R97081, (Item #: 177034)$26.22
Water Pump - New - With Hub - Less Pulley For 820, 830, 1020, 1520, 1530, 2020, 2030 with 152 Diesel Engine. OEM# R55758 (Item #: 101902, Ref: WP1485)$100.00
Water Pump Pulley, Bolt On - This Water Pump Pulley is for tractor models 820, 830, 1020, 1520, 2020, 2030, 2510, 2520, 210C, 290D, 300B, 301A, 302, 302A, 310A, 310B, 350, 350B, 350C, 350D, 400G, 401B, 401C, 401D, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 480C, 482C, JD380, JD401, JD480, JD480A, JD480B. Replaces T30721. Bolt on. (Item #: 150383, Ref: T23628)$95.00
Decals and Emblems
Be Careful Plate - This plate is used on A, AN, (AW serial number 584000 and up), B, BN, (BW serial number 201000 and up), G, GM, (GN serial number 26000 and up), GW, R, 50, 520, 60, 620, 70, 720, 80, 820 2 cylinder. (Item #: 109913, Ref: R4473)$11.50
No Picture
Decal Set - Decal Set for John Deere Model 820 (2-cyl) Diesel, 15pc. (Item #: 183708, Ref: JD820D)$56.00
No Picture
Decal Set - Hood only set for John Deere Model 820 (3-cyl) Diesel. (Item #: 164933, Ref: R3741)$54.00
Front Medallion - Front Medallion for models 320, 420, 520, 620, 720, (820 2 cylinder). Medallion measures 4 1/2 inches wide, 3 1/4 inches tall. Does NOT come with retainers (Item #: 103948, Ref: AF3166R)$170.72
Grille Emblem - For John Deere tractor models 820, 920, 1020, 1120, 1520, 1830, 2020, 2030, 2130, 3030, 3120, 3130, Replaces John Deere OEM number T24437, (Item #: 169400)$162.00
Hood Decal, 820 - For John Deere tractor model 820 (2 Cyl., Diesel), Replaces John Deere OEM number JD820, (Item #: 164932)$55.00
Hood Decal, 820 - For John Deere tractor model 820 (2 Cyl.), Replaces John Deere OEM number JD830, (Item #: 164934)$81.00
Differential - For 820, 830, 1530, 2030, 2040, 2240, 2150, 2350, 2550, 2155, 2355, 2555, 300B. Differential with 1/2" holes. For Differential with 7/16" holes, use Part #S.61553. (Item #: 180629, Ref: S.61784)$1279.01
Differential - For 820, 830, 1530, 2030, 2040, 2240, 2150, 2350, 2550, 2155, 2355, 2555, 300B. Differential with 7/16" holes. For Differential with 1/2" holes, use Part #S.61784. (Item #: 180633, Ref: S.61553)$998.58
Differential Assembly - Used on John Deere models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2040, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310, 410. This assembly has 7/16 inch rivet holes and 1 9/16 inch Axle gear inside diameter. The Left Hand bearing surface of 2 1/16 inches OD and Right Hand bearing surface of 2 11/16 inches OD. Verify measurements before ordering. Many of the models listed had more than on assembly with different measurements. (Item #: JDDIFF001)$822.59
Differential Assembly - Used on John Deere models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2040, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310, 410. This assembly has 1/2 inch rivet holes and 1 9/16 inch Axle gear inside diameter. The Left Hand bearing surface of 2 1/16 inches OD and Right Hand bearing surface of 2 11/16 inches OD. Verify measurements before ordering. Many of the models listed had more than on assembly with different measurements. This assembly contains R51500, T30253, L29227, L29226, T29394, T21430 (Item #: JDDIFF002)$822.60
Gear (4TH and 8TH) - 20/27 tooth, 4.075 inch O.D., 1.875 inch I.D. For JD 1520, 1530, 2020, 2030, 2040, 2240, 2440, 820, 830, (2155, 2355 All SN# <756483) tractors. (Item #: 172301, Ref: T21977)$184.00
Gear Shift Knob - Plastic knob, 3/8 inch fine thread. For tractor models (A styled from serial number 648000), AR, AO, (B styled from serial number 201000), (G styled from serial number 13000), 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, (820, 830 2-cylinder). (Item #: 109545, Ref: 03501AB)$4.00
Gear Shift Lever, Straight - For tractor models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1830, 2020, 2030, 2120, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750. Knobs available, for BLACK order S.00641, for RED order S.72358, please specify in comments section if needed. Replaces R29936, R53817, T28809, 34H251, AL32791 (Item #: 152054, Ref: AL32791)$31.00
Oil Seal - Seal. For tractor models 820 Mannheim prior to serial number 042924~ 830 Mannheim with T25809 hub~ 1020 and 1520 except Heavy Duty axle on Hi-Crop and Row Crop~ 2010 except low profile Row Crop, 2020~ 2030 except Heavy Duty axle, 2040 with T25809 hub, 2240, For 1020, 1520, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830 (Item #: 110547, Ref: TP-AT10344)$8.20
Shift Lever - For tractor models 1020, 1520, 2020, 2030, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 401, 401B, 401C, (820 SN# up to 024012) (Item #: 172674, Ref: AT20093)$61.00
Shift Lever - Used on John Deere models: 1020, 1030, 1030OU, 1030VU, 1035, 1035EF, 1035EV, 1130, 1520, 1530, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1830, 2020, 2030, 2030OU, 2035EF, 2120, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 820, 830, 920, 930, 930VU. This part replace John Deere part numbers R53817, T22809 (Item #: 152054, Ref: R53817)$31.00
Shift Lever Knob - This Red Shifter Knob is 1.600 inches outside diameter and has 3/8 inch - 24 UNF fine threads. Replaces John Deere part numbers R153875, R161382, R50864, R58296 (Item #: 114351)$8.50
Shift Rod - For tractor models 820, 830, 1020, 1030, 1520, 1530, 2020, 2030, 2040, 2120, 2440, (early 2640 up to SN# 309999). (Item #: 179957, Ref: AL33247)$36.30
Condenser - Pony Motor Distributor - For John Deere tractor models 70, 80, 720, 730, 820, 830, Replaces John Deere OEM number X9263, Two required per engine, (Item #: 124003)$12.00
Distributor - Wico B-4 - For tractor models 70, 720, 730, 80, 820, 830 FOR PONY STARTING MOTOR ENGINE. Wico Model B-4 Distributor, complete, new. (Item #: 121924, Ref: AR1370R)$413.65
External Voltage Regulator - External Voltage Regulator. For Bosch System. For tractor models 1020, 1030, 1120, 1130, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2840, 3030, 3120, 3130, 820, 830 LOADER, 830 WINDROWER, 920, 930 All with Bosch system. Replaces 01160376, 01163008, 190601009. (Item #: 113314, Ref: AT31413)$29.70
No Picture
Generator - Delco Style (10235), Remanufactured, Delco Remy, 1100027, AF2080R - For John Deere tractor models 70, 80, 720, 820, Compatible with John Deere Combine (s) 45, Compatible with John Deere Hay Cutting (s) 215, 830, Replaces John Deere OEM number AF2080R, Replaces Delco Remy manufacturer number 1100027, 1100038, Replaces manufacturer number 10235, 340-191, 92-01-3042, Delco Style, Voltage: 6, Rotation: Clockwise, Amperage: 35, Regulator: External, (Item #: 203531)$435.01
No Picture
Generator - Delco Style (9974), Remanufactured, Delco Remy, 1103021, AR11007 - For John Deere tractor models 80, 720, 730, 820, 830, Replaces John Deere OEM number AR11007, Replaces Delco Remy manufacturer number 1103021, Replaces manufacturer number 9974, 340-87, 92-01-3043, Delco Style, Voltage: 24, Rotation: Clockwise, Amperage: 10, Regulator: External, Additional Handling and Oversize Fees Apply To This Item, (Item #: 203523)$394.90
Governor Bearing and Race - For John Deere tractor models H, R, 80, 820, 830, 840 (2 cylinders only), Replaces John Deere OEM number JD7150, JD7151R, JD7152R, JD7153R, (Item #: 115159)$64.00
Ignition Key - Only - For John Deere tractor models A, AO, AR, B, G, 80, 420, 820 (2-Cylinder), 830 (2-Cylinder), 1010, 2010, 2510, 3010, 3020, 4010, 4020, 5010, 5020, 8020 Replaces John Deere OEM number A4700R, , Compatible with Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88, Compatible with Massey Ferguson Construction and industrial models 200, Replaces Massey Ferguson OEM number 180292M1, 192427M1, (Item #: 121147)$3.00
Key Switch, 2 Terminal - With keys. For tractor models 420, (A from SN# 662874 and up), (AO, AR from SN# 275533 and up), (B from SN# 268820 and up), (G from SN# 46501 and up), 80, (820, 830 2-cylinders). Replaces A4699R, AA5592R, AB4063R, AB4087R. (Item #: 111037, Ref: AB4063R)$33.00
Point Set - Pony Motor Distributor - For John Deere tractor models 70, 80, 720, 730, 820, 830, For John Deere Magneto number X9021, Two required per engine, Sold individually, Gap points at 0.020", (Item #: 124002)$28.51
Push Button Starter Switch - 3 Terminal Push Button Starter Switch with Rubber Cap. Fits 80, 720, 730, 820 2 cylinder, 830 2 cylinder (with Pony start)530, 630, 730 (Gas, LP, All fuel. This starter switch has 5/8 - 32" thread O.D., 3 screw terminals. Switch is rate up to 36 volts. Replaces: AR21219, AR21823, AR20431, AR1324R (Item #: 121158, Ref: AR21219)$10.30
Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H10, H10C, H10J, H11, H12, H8, H8J, RH10, RH12, RH8 spark plugs. For tractor models 320, 330, 420, 430, 820, 830. Price is for 1 plug. If you need 4, you need to order 4. Verify correct spark plug size and type (Item #: 111743, Ref: AL295)$4.00
Starter - 12 volt, 13 tooth, clockwise rotation. For tractor models 1133, (820 1968-72 with 3 cyl), (830 1972-75 with 3 cyl), 840, (920 1970-75), (1020 1965-73 with 152 dsl), (1520 1968-73 with 164 dsl), (1530 1974-75 with 164 dsl), (2020 1965-72 with 202 dsl), (2030 1971-75 with 219 dsl), (2040 1972-85 with 152 dsl), (2150 1982-87 with 3-179 dsl), (2155 1987-92 with 3-179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 3-179 dsl), (2350 1983-86 with 4-239 dsl), (2355 1986-92 with 4-239 dsl), (2550 1982-87 with 4-239 dsl), (880 1970-80 with 202 dsl), (270 1975-78 with 4-219 dsl), (2280 1975-85), (2320 1981-83 with 4-219 dsl), (2360 1984-93 dsl), (2420 1975-85 with 219 dsl). Replaces 1107863, 1362312, 1367075, 1107871, 1998367, 028000-8401. (Item #: 156209, Ref: SND0044)$140.00
Starter - This is a new Bosch design starter. 12v, 10 tooth, Direct Drive Bosch type unit. 3.0KW, two (2) bolt mount. Uses AL55046 solenoid and AL25275 drive. Uses correct 13.5mm mounting hole diameter on DE. Fits multiple John Deere Tractors. Replaces; John Deere part numbers: AL110597, AR70436, AT23401, SE501411, SE501412, TY25290, TY25292, TY6720, TY6726, TY6780. (Item #: 109770, Ref: AR70436)$180.00
Starter - This is a 12 volt, Delco style starter OSGR with 10 teeth and clockwise rotation. Replaces 1107577, 1990435, SE501428, TS-1173, TS-1308, TS-1574, TS-6145, TY25994, 1107599, 1107863, 1107871, 260-67101, AL41247, AL62690, AL70850, AMRE239087, AR66424, AT18150, AT25619, DRS2420, DRS4730, DRS4740, RE19187, RE19275, RE50095. Used on for diesel application. (Item #: 113951, Ref: RE239087)$175.00
Starter Armature - Used with Delco Starter # 1107155, 1107424, 1107445 on John Deere (B with serial number 96000 to 200999), BO, BR, (70, 730, 80, 820, 830 with a pony start diesel). Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Item #: 182636, Ref: 1871662)$93.58
No Picture
Starter - Delco Style (3798), Remanufactured, Delco Remy, 1113830, AR11073 - For John Deere tractor models 80, 720, 730, 820, 830, Compatible with John Deere Construction and industrial models 644B, Replaces John Deere OEM number AR11073, AR102776, Replaces Delco Remy manufacturer number 1113830, 1113801, Replaces manufacturer number 3798, Voltage: 24, Rotation: Clockwise, Teeth: 13, (Item #: 204401)$630.01
No Picture
Starter - Delco Style DD (4063), Remanufactured, Delco Remy, 1107155, AR1203R - For John Deere tractor models 80, 720, 730, 820, 830, Replaces John Deere OEM number AR1203R, Replaces Delco Remy manufacturer number 1107155, Replaces manufacturer number 4063, 140-091, 91-01-3675, Delco Style: Direct Drive, Voltage: 6, Rotation: Clockwise, Teeth: 16, (Item #: 203429)$406.64
Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672)$52.00
Starter Solenoid - Delco Starter Solenoid Assembly, flange mount, services starters 1107879 or 1107577 on 1010, 2010 gas~ 1107339 on 2510~ 1107350 or 1107578 on 3010, 3020, 4010, 4020 replaces Delco 1114356, 1114256, R11240. 12 volt {A} For 820, 1010, 2010, 2510, 3010, 3020, 4010, 4020 TP-AR68304 (Item #: 105675, Ref: 1047083M91)$17.00
Starter Solenoid - 2 bolt, Used with Bosch starters. For tractor models 1020, 1120, 1830, 2020, 2030, 2120, 2130, 3030, 3120, 3130, 920, (1530 engine SN# up to 152929), 820, 830. (Item #: 115851, Ref: AL19192)$39.00
Starter Switch, Keyed - This starter switch comes with 2 keys, has seven terminals on the back and is for models: 1020, 1030, 1120, 1130, 1630, 1830, 2020, 2030, 2120, 2130, 3030, 3120, 3130, 820, 830, 920, 930. Starter Switch replaces AR55721, AL16046. (Item #: 173332, Ref: AL19890)$31.00
Starter Switch, Used - For John Deere tractor models 820, 830, 920, 930, 940, 955, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2955, 3020, 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Harvester(s) 9900, Compatible with John Deere Construction and industrial models 300B, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, Replaces John Deere OEM number AR58126, For a new version of this item use Item #: 156037, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 456037)$9.01
Main Bearing - .010 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.010 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27353, AT21110 (Item #: 123853)$9.90
Main Bearing - .020 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.020 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27360, AT21112 (Item #: 123854)$8.80
Main Bearing - .030 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.030 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27368, AT21114 (Item #: 123857)$27.98
Main Bearing - Standard - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers T23214, R515304, RE27352, AT21140 (Item #: 123852)$10.60
PTO Seal - For John Deere tractor models 820 (3 Cyl.), 920, 1020, 1030, 1035, 1120, 1130, 1520, 1630, 1635, 2020, 2030, 2035, 2120, 2440, 3010, 4010, Compatible with John Deere Construction and industrial models 300, 301, 302, 400, 401, Replaces John Deere OEM number AR26706, Outside Diameter: 4.506", Shaft Diameter: 3.500", Type: Dual Lip, Width: .374", (Item #: 161850)$21.10
Thrust Bearing - 010 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.010 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers (Item #: 123859, Ref: AT21132)$29.40
Thrust Bearing - .020 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.020 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE527235, AT21134 (Item #: 123860)$16.98
Thrust Bearing - 030 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.030 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers AT21136, RE527236 (Item #: 123861)$10.98
Thrust Bearing - Standard - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers AT21139, T23215 (Item #: 123858)$34.00
Engine Gaskets
No Picture
Cylinder Block Plate Gasket - For John Deere tractor models 820, 830, 920, 930, 1030, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3030, 3130, 3300, 4030, 4050, 6600, Compatible with John Deere Combine (s) 925, 935, 945, 955, 965, 965 (H), 968 (H), 975, 985, Replaces John Deere OEM number R90648, R131794, R73140, T24965, (Item #: 176678)$11.60
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 6200, 6200, 6200L, 6200L, 6300, 6300L, 6400, 6400L, 6400SP, 6500, 6500L, 6506, 6600, 6800, 6900, 7200, 7220, 7320, 7400, 7500, 7600, 820, 830, 840, 920, 930, 930VU, 940, 940VU, SE6100, SE6200, SE6300, SE640, 500, 555, 750, 800, 850, 900, 950, 855, 950, 1072, 1075, 1075HY, 1085, 1133, 1144, 1155, 1157, 1158. Replaces AR67942, AT21608 (Item #: 106849, Ref: AT21608)$7.00
Full Gasket Set - This is a Full Gasket Set without crankshaft seals. It includes Sealing Washers. Note: Narrow side of the fire ring (crimp) of the head gasket goes toward the cylinder head. It is used on 2 cylinder 80, 820, 830, 840. Replaces: AR1419R, AR1889R, RE524137 (Item #: 185034, Ref: FS2704)$392.87
No Picture
Gasket Set - Complete gasket set with crankshaft seals and sleeves (where required), 1 used per engine. For 820, 830, and 1020 diesel, 3 cylinder 152 CID. (Item #: FS3356W)$109.71
No Picture
Gasket Set, Complete, 152 Diesel - With Rear Main Seal and Timing Cover Seal For 301A, 820, 830, 1020, 1030 with 152 Diesel Engine. (Item #: 106928, Ref: R-RE38570)$76.00
No Picture
Head Gasket - For John Deere tractor models 820 (3 Cylinder), 830 (3 Cylinder, s/n 154766-later with 3.152D Engine), 1020, 1030, Compatible with John Deere Construction and industrial models 300, 300A, 300B (s/n 154766-later with 3.152 Engine), 301A (s/n 154766-later with 3.152 Engine), 350, 350A, 350B, 380, Replaces John Deere OEM number R98460, R52789, (Item #: 174050)$45.00
Head Gasket Set - This is a more comprehensive version of the traditional Head Set or Valve Grind Set. It includes all gaskets needed to replace cylinder head, including sealing washers. Note: Narrow side of the fire ring (crimp) of the head gasket goes toward the cylinder head. It is used on 2 cylinder 80, 820, 830, 840. Replaces: AR1418R, AR1419R, AR1888R, AR1889R, RE524137, RE524141 (Item #: 184804, Ref: HS2704)$221.00
No Picture
Head Gasket Set, 152 Diesel - For 820, 830, 1020, 1030 with 152 CID Diesel Engine. (3 Cylinder)R-RE38848 (Item #: 106876, Ref: HS3356W)$58.00
No Picture
Liner Sealing Ring Kit - For John Deere tractor models 820, 830, 1020, 2020, 2510, 2520, 4030, 8630, 8640, 8650, Compatible with John Deere Construction and industrial models 300, 301, 350, 380, 400, 401, 440, 450, 480, 540, 544, 570, Compatible with John Deere Engine (s) 135 (s/n 162079-later), 152 (s/n 154766-later), 202 (s/n 157353-later), Replaces John Deere OEM number AR71617, No o-ring grooves on sleeve, 3 o-rings, (Item #: 128692)$7.00
Oil Pump Gear Cover Gasket - For John Deere tractor models A (s/n 424025-later), ANH (s/n 424025-later), AO (s/n 251486-later), AR (s/n 251486-later), AW (s/n 424025-later), B, BN, BNH, BO, BR, BW, BWH, G, GH, GM, GN, GW, H, HNH, HWH, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840, Replaces John Deere OEM number B246R, 0.020" Thick, 4 Bolt Hole, (Item #: 164422)$8.10
No Picture
Oil Seal - Seal. For tractor models 820 Mannheim serial number 042925 and up, 830 Mannheim with R47076 hub, 2040, 2240. For 2040, 2240, 820, 830 (Item #: 110547, Ref: TP-AR49592)$8.20
No Picture
Rear Main Seal - For 820, 830, 1020, 1030 with 152 Diesel Engine (Item #: 106854, Ref: R-RE24959)$27.00
Clutch Shaft, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040 (s/n 349999-earlier), 2240 (s/n 349999-earlier), 2440, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos T42381, 540 PTO, Collar Shift Tranny, 19 Tooth Gear, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498450)$590.01
Connecting Rod - Fits (300B SN <710723 Diesel), (301A SN <710721 Diesel), (302 Gas), (310 SN <189323), (350B Diesel), (350C Eng. SN 329334-590074 Diesel), (380 Diesel), (410 SN <189345 Diesel), (450B SN <187208), (480A SN <193099 Diesel), (540A SN <119500), (570 SN <275230), (570A SN <275230), 1520, (2520 Diesel), (300, 300A, 350A, 350B, 380, 1020, 1030, 820, 830, W/ 3.152 ENG), (302, 302A, 350B, 1420, 1520, 1530 SN <179601 3.164D ENG). Also used in 4.219 and 6.303 Engines. Verify Casting numbers R81410 Or T20007. (Item #: 121167, Ref: RE19733)$98.00
Connecting Rod Bolt - Used on Connecting Rods marked T20007, R51727, or R58979, this bolt is 2.125 inches long. (Item #: 109500, Ref: R74194)$2.70
Connecting Rod, Used - For John Deere tractor models 820, 830 (154766-later), 1020, 1030, 1420 (s/n 179601-earlier), 1520 (s/n 179601-earlier), 1530 (s/n 179601-earlier), 2020, 2030 (s/n 275483-later), 2320 (s/n 275483-later), 2510, 2520 (Diesel), Compatible with John Deere Harvester(s) 499 (s/n 275483-later), Compatible with John Deere Construction and industrial models 300, 300A, 300B, 301A, 302 (s/n 179601-earlier), 302A, 310 (s/n 189323-earleir), 350A, 350B, 350C, 380, 400, 401 (s/n 275483-later), 410 (s/n 189345-earlier), 410B, 440, 440A (s/n 181034-earlier), 440C, 450 (s/n 158257-earlier), 450A, 450B, 480, 480A, 540A, 544, 570, 570A, 3420, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2420, Replaces John Deere OEM number AT18005, MAT18005, RE19733, Replaces John Deere Casting nos T20007, R81410, For a new version of this item use Item #: 121167, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421167)$44.01
Crankshaft - This crankshaft should be verified by the Casting # T23516 off your old crankshaft AND Snout Length of 1.37 inches. This casting number had 2 different snout lengths and is NOT interchangeable. It does not come with gear or bearings. For tractor models 1020, 1030, 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2330, 2355, 300, 300A, 300B, 301A, 302, 302A, 310, 350A, 350B, 350C, 350D, 355D, 380, 5200, 5300, 5400, 5400N, 5500, 820, 830. Please Verify Length Of Snout Before Ordering, standard short snout (1.370"). (Item #: 102102, Ref: AT18031)$562.00
Crankshaft Pulley - For JD103, 1020, 820, 830, 2240. Crankshaft Pulley replaces T24441, T25366. 1.5" I.D., 2.750" Center to Center on Holes. (Item #: 158238, Ref: R59915)$106.00
No Picture
Cylinder Head, Remanufactured, R58686 - For John Deere tractor models 820, 830, 930, 940, 1030, 1040, 1140, 1530, 1550, 1750, 1850, 2040, 2155, 2240 (Diesel), Compatible with John Deere Construction and industrial models 300, Compatible with John Deere Hay Cutting (s) 930, Replaces John Deere Casting number R58686, Cylinders: 3, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200303)$950.01
Flywheel Housing, Used - For John Deere tractor models 820 (Utillity), 830 (Utillity), 1020, 1520, 1530, 2020, 2030, 2040 (Utillity s/n 349999-Earlier), 2240 (s/n 349999-Earlier), 2440 (s/n 340999-Earlier), 2630, 2640 (s/n 340999-Earlier), 2840, Replaces John Deere OEM nos R63434, T25117, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496790)$375.01
Front Engine Plate, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2040 (s/n 465252-earlier), 2240 (s/n 465252-earlier), 2440, 2510, 2630, 2640, 2840 (ESN ending with T), 4030, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, Compatible with John Deere Harvester(s) 484, 7440 (s/n 599234-earlier), 9900, 9910, 9920, 9920 (s/n 599234-earlier), Compatible with John Deere Construction and industrial models 300B (s/n 127775-earlier), 301A (s/n 127775-earlier), 350C (s/n 127775-earlier), 510B (s/n 129443-earlier), Compatible with John Deere Engine(s) 4276 (s/n 129222-earlier), Compatible with John Deere Hay Cutting(s) 2280, 2320, 2420, Replaces John Deere OEM nos R56736, Diesel Engines, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434397)$100.01
No Picture
Front Plate, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2640 (s/n 341000-later), 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3055, 3150, 3155, 3255, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 7200, 7400, 7600, 7700, 7800, Compatible with John Deere Combine(s) 3300, 4425, 4435, 9400, Compatible with John Deere Skid Steer Loader(s) 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 7440, 7445, 7450, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 210C, 300B, 300D, 310D, 315D, Compatible with John Deere Engine(s) 4039, 4045, 4239D, 4239T, 4276, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2360, 3430, 3830, Compatible with John Deere Sprayer(s) 6100, 6500, 6600, Replaces John Deere OEM nos RE16149, R79863, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442437)$145.01
Gear - 4Th and 8Th, Used - For John Deere tractor models 820, 830, 1520, 1530, 2020, 2030, 2040, 2155 (s/n 756483-earlier), 2240, 2355 (s/n 756483-earlier), 2440, Replaces John Deere OEM number T21977, Teeth: 27 and 20, For a new version of this item use Item #: 172301, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438058)$71.01
Helical Camshaft Gear, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1040, 1120, 1140, 1350, 1420, 1520, 1530, 1630, 1640 (s/n 430000-later), 1750, 1850, 2020, 2030, 2040, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240, 2250, 2255, 2320, 2350, 2355, 2355N, 2440, 2450, 2510, 2520, 2530, 2535, 2550, 2555, 2630, 2640, 2650, 2730, 2735, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3040 (s/n 430000-later), 3050, 3055, 3100, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 3330, 3350, 3530, 3540, 4020, 4030, 4050, 4530, 5105, 5200, 5205, 5210, 5220, 5300, 5310N, 5400, 5400N, 5500, 5700, 6200, 6200L, 6210, 6300, 6300L, 6310, 6400, 6400L, 6410, 6500, 6500L, 6510, 7200, 7210, 7400, 7410, 7600, Compatible with John Deere Combine(s) 3300, 4400, 4420, 4425, 6600, 6602, 9400, Compatible with John Deere Skid Steer Loader(s) 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 484, 499, 699, 7440, 7445, 7450, 7455, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 70D, 210C, 244E, 290D, 300A, 300B, 300D, 301A, 302A, 310C, 310D, 315C, 315D, 340D, 344E, 350A, 350B, 350C, 350D, 355D, 380, 400, 401, 401A, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 440A, 440B, 440C, 444D, 448D, 450, 450A, 450B, 450C, 450D, 455D, 480, 480A, 480B, 480C, 490, 510B, 515B, 540B, 540D, 544, 544B, 544E, 544G, 548D, 555A, 555B, 555G, 570, 570A, 570B, 590D, 595D, 610B, 610C, 640D, 648D, 650G, 670, 670A, 672A, 710B, 710C, 3420, Compatible with John Deere Engine(s) 135, 152, 180, 202, 219, 3029, 4039, 4045, 4239D, 4239T, 6059T, 6068D, 6068T, 6329D, 6359D, 6359T, 6414D, 6414T, Compatible with John Deere Hay Cutting(s) 2270, 2280, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM number T20070, Teeth: 48, For a new version of this item use Item #: 121425, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421425)$25.01
Injection Pump Drive Gear, Used - For John Deere tractor models 820, 920, 1020, 1520, 1530, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 7600, Compatible with John Deere Combine(s) 3300, 4420, 6600, 9400, Compatible with John Deere Skid Steer Loader(s) 250, 260, 8875, Compatible with John Deere Harvester(s) 484, 7440, 7445, 7450, 9930, Compatible with John Deere Construction and industrial models 310G, 310J, 310SG, 310SJ, 315SG, 315SJ (s/n BE315SJ300869-later), 344G, 410D, 410G, 410J, 440D, 444E, 444G, 450G, 455G, 490E, 495D, 510C, 510D, 540D, 540E, 540G (s/n 701059-earlier), 544E (s/n 300000-later), 544G, 548D (s/n 299999-earlier), 548E, 548G (s/n 701059-earlier), 550G, 555G, 590D, 595D, 624E (s/n 300000-later), 624G, 640D, 640E, 640G, 643D, 648D, 648E, 648G, 650G, 653E (s/n 713455-earlier), 655B, 670B, 672B, 690D, 690DR, 690ELC (s/n 704568-earlier), 693D, 710G, 710J, 740E, 748E, 750B, 750C (s/n 715797-earlier), 755B, 790ELC, 4400 (s/n 276749-earlier), 4500 (s/n 276749-earlier), Compatible with John Deere Engine(s) 3029, 4039, 4045, 4045T, 6059 (s/n 699999-earlier), 6068, 6068D, 6068T, Compatible with John Deere Hay Cutting(s) 3830, Compatible with John Deere Sprayer(s) 6100, 6500, 6600, Replaces John Deere OEM nos R104907, R56056, R84663, R116339, T20165, Teeth: 48, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434339)$50.01
John Deere, T22991, Used - For John Deere tractor models 820 (s/n 038435-earlier), 920 (s/n 038435-earlier), 1020 (s/n 046067-earlier), 1120 (s/n 046067-earlier), 2020 (s/n 046067-earlier), 2120 (s/n 046067-earlier), Replaces John Deere OEM nos T22991, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 455565)$470.01
No Picture
Pinion Shaft Gear, Used - For John Deere tractor models 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550 (s/n 756483-earlier), 1630, 1640, 1641F, 1750 (s/n 756483-earlier), 1830, 1840, 1850 (s/n 756483-earlier), 2020, 2030, 2040, 2120, 2150, 2155 (s/n 756483-earlier), 2240, 2250 (s/n 756483-earlier), 2255, 2350, 2355 (s/n 756483-earlier), 2440, 2450 (s/n 756483-earlier), 2550, 2555 (s/n 756483-earlier), Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 310, 380, 400, 401, 401C, 410, 480, 480C, Replaces John Deere OEM number T21976, 2nd and 6th Speed, Teeth: 20, Teeth: 36, For a new version of this item use Item #: 172309, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437964)$95.01
No Picture
Reverse Gear, Used - For John Deere tractor models 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155 (s/n 756483 -earlier), 2240, 2250, 2255, 2350, 2355 (s/n 756483 -earlier), 2440, 2450, 2550, 2555 (s/n 756483 -earlier), 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, Replaces John Deere OEM number T21981, Teeth: 21, For a new version of this item use Item #: 173323, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447898)$104.01
Ring Gear, Flywheel - This ring gear is used on Pony starting engine. For tractor models R, 80, 720, 730, 820, 830. (Item #: 114876, Ref: F2265R)$88.00
Rocker Arm, Used - For John Deere tractor models 820, 940, 1020, 1030, 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1640, 1750, 1850, 2020, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2250, 2320, 2350, 2355, 2440, 2450, 2510, 2520, 2530, 2535, 2550, 2555, 2730, 2735, 2940, 2950, 2955, 3040, 3050, 3055, 3120, 3140, 3150, 3155, 3255, 3300, 3330, 3540, 4050, 5103, 5105, 5203, 5205, 5210, 5220, 5303, 5310, 5320, 5400, 5403, 5410, 5500, 5510, 6200, 6300, 7200, 7500, 7600, 7700, 7800, Compatible with John Deere Combine(s) 3300, 4400, 4420, 4425, 6602, 9400, Compatible with John Deere Skid Steer Loader(s) 240, 250, 260, 8875, Compatible with John Deere Harvester(s) 499, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 70, 70D, 210C, 244E, 290D, 300, 300A, 300B, 300D, 301, 301A, 310A, 310B, 310C, 310D, 315D, 340D, 344E, 350, 350A, 350B, 350D, 355D, 380, 400, 401, 401A, 401B, 401C, 401D, 410, 410B, 440A, 440B, 440C, 440D, 444, 444D, 444E, 444G, 448D, 450, 450B, 450C, 450D, 455D, 480, 480A, 480B, 480C, 482C, 490, 510C, 510D, 515B, 540B, 540D, 548D, 550A, 550B, 555G, 570A, 590D, 595, 595D, 610B, 610C, 640D, 648E, 650G, 670A, 750B, 755, 755A, 755B, Compatible with John Deere Engine(s) 3029, 3179, 4039 (s/n 379968-earlier), 4039T (s/n 379968-earlier), 4045 (s/n 379968-earlier), 4045T (s/n 379968-earlier), 4219, 4239, 4239T, 4276, 6059 (s/n 379968-earlier), 6059T (s/n 379968-earlier), 6068 (s/n 379968-earlier), 6068T (s/n 379968-earlier), 6076H, 6076T, 6303, 6329D, 6359D, 6359T, 6414, 6414T, Compatible with John Deere Hay Cutting(s) 2270, 2280, 2320, 2360, 2420, 3430, 3830, Replaces John Deere OEM number AR103679, RE31973, For a new version of this item use Item #: 117539, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435717)$14.04
Shift Collar - Pinion Shaft, Used - For John Deere tractor models 820, 920, 1020, 1030, 1120, 1130, 1630, 1640 (s/n 430000-later), 1641F, 1830, 2030, 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2150, 2155, 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, Compatible with John Deere Combine(s) 925, 930, 932, 935, 940, 942, 945, 952, 1032, 1042, 1052, 1133, 1144, Compatible with John Deere Harvester(s) 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950, 7200, 7250, 7300, 7350, 7400, 7450, 7500, 7550, Replaces John Deere OEM number L29283, Splines: 20, For a new version of this item use Item #: 172429, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431245)$42.01
Transmission Countershaft, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120 (1030), 1130, 1520, 1530, 1630, 1640 (s/n 430000-Later), 1830, 2030, 2040 (s/n 430000-Later), 2120, 2150, 2240, 2255, 2350, 2355 (s/n 756483-Earlier), 2550, 2555 (s/n 756483-Earlier), Replaces John Deere OEM number T24726, Teeth: 37, For a new version of this item use Item #: 164810, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496773)$194.01
Transmission Drive Shaft, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2040S, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM nos T21980, Teeth: 14, 18, 23, 28 and 12, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430538)$175.01
No Picture
Valve, Exhaust - For tractor models 80, (820, 830 both 2 cylinders). Replaces AR1383R. (Item #: R1337R)$50.33
Valve, Intake - Used on John Deere 152, 164, 179 - 3 cylinder, 202, 219, 239, 276 4 cylinder, and 329. 359 6 cylinder diesel engines. 1.772 inch Head O.D., 0.371 inch Shaft O.D., 5.168 inch Overall Length. Replaces John Deere R79623, R52251 (Item #: 128629, Ref: R79623)$8.20
No Picture
Valve, Intake - For tractor models 80, (820, 830 both 2 cylinders). Replaces AR1384R. (Item #: R1336R)$35.59
Valve Lifter, Used - For John Deere tractor models SE6100, SE6200, SE6300, SE6400, 301, 820, 830, 840 (s/n 599999-earlier), 920, 930, 940, 1020, 1030, 1035 (s/n 50000-later), 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1635, 1640, 1830, 1840, 1850, 1950, 2020, 2030, 2035, 2040, 2130, 2135 (s/n 50000-later), 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955 (s/n 767516-earlier), 3030, 3040, 3050, 3100, 3110, 3120, 3130, 3135, 3140, 3150, 3200, 3210, 3255, 3300, 3310, 3340, 3350, 3400, 3410, 3640, 3650, 4030, 4040, 4240, 5103, 5105, 5200, 5203, 5205, 5210, 5215F, 5215V, 5220, 5300, 5303, 5310, 5315, 5315V, 5320, 5400, 5403, 5410, 5415, 5500, 5510, 5515, 5515V, 5600, 5700, 6200, 6300, 6400, 6500, 6600, 6800, 6900, 7200, 7220, 7320, 7400, 7500, 7600, 7700, 7800, Compatible with John Deere Combine(s) 925, 945, 952, 975, 985, 1032, 1042, 1052, 1065 (s/n 41200-later), 1068, 1075, 1085, 1133, 1144, 1155, 1157, 1158, 1166, 1169, 1174, 1177, 2054 (European), 2056 (European), 2058 (European), 3300, 4400, 4420, 4435, Compatible with John Deere Skid Steer Loader(s) 24, 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 484, 5440, 7440, 7445, 7450, 9900, 9910, 9920, Compatible with John Deere Construction and industrial models 301A, 344E, 344G, 401B, 444, 444C, 444D, 444E, 444G, 544, 544G, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM number T20073, For a new version of this item use Item #: 123888, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442423)$4.51
No Picture
Valve Lock - Pair - This pair of valve locks is a set for 1 valve. For tractor models 60, 620, 630, 720, 730, 80, (820, 830 2 cylinders), (A from SN# 488000), (AO, AR from SN# 260000 and up), R, (70 gas, LP and diesel). (Item #: 185432, Ref: A2332R)$28.40
No Picture
Valve Spring - For tractor models 80, (820, 830 both 2 cylinders). (Item #: R1338R)$25.20
Valve Stem Cap - This Valve Stem Cap is used on Multiple John Deere Models. It replaces original part number T20129. (Item #: 121443, Ref: T20129)$3.90
Engine Pistons and Sleeves
No Picture
Piston Pin Bushing - For tractor models (1020, 1030, 300, 300A, 350A, 350B, 380, 820 with 3.152 eng.), (1420, 1520, 1530, 302, 302A, 350B SN# 179601 and below with 3.164D eng.), (2020, 2510, 400, 440, 480 with 4.202 eng.), (2030, 2270, 2320, 2420, 2520, 401, 401A, 440, 440A, 440B, 450A, 450B, 480A, 499 SN# 275483 and up with 4.219 eng.), (2355NCS, 2355NTSS with 3.179T eng.), (300B, 301A, 830 SN# 154766 and up with 3.152 eng.), (3120, 4020, 4030, 4420, 499, 540A, 544A, 570A, 699 SN# 277548 and below with 6.329 eng.), (3420, 544 SN# 158976 and up with 6.303 eng.), (450 SN# 158257 and below with 4.202 eng), 5400N, 5500. (Item #: 156030, Ref: T23471)$3.98
No Picture
Sleeve and Piston Kit - Complete kit for one cylinder. 3.86" bore, 1.185" pins. O-rings in block. (3) required For tractor models 1020, 1030, 300, 300A, 300B, 301A, 350A, 350B, 380, 820, 830 all SN# 154766 and up with 3.152D engine. (4) required For tractor models 2020, 2510, 400, 440, 480 all SN# 158257 and up with 4.202 engine. (6) required For tractor models 3420, 544 SN# 158976 and up with 6.303 engine. Kit comes with piston, pins, sleeve, rings. (Item #: 166127, Ref: AR71591)$120.00
No Picture
Sleeve Assembly (3 Required) - 3.858 Bore with O-Rings on Sleeve For 820, 830, 1020, 1030 with 152 Diesel Engine (To S#154765) (Item #: R-CK3481)$119.56
Exhauste Manifold - For 1020, 1520, 1530, 2040, 2240, 820, 830, all with 3 cylinder diesel engines. Does not come with manifold gaskets. Order part number 126923 x3 for gaskets. (Item #: 101584, Ref: T20252)$110.00
Manifold Gasket, Single - This gasket is used with T20252 Manifold. For tractor models 1020, 1520, 1530, 2040, 2240, 820, 830, 920, 930 and 940. Order 3. (Item #: 126923, Ref: R0912G)$1.50
Muffler, Vertical - Round body 3-3/4" shell diameter, 3 bolt mounting plate, 18-1/4" shell length, 1" outlet length, E= 2-1/2" outlet O.D., F= 20" overall length. For model (R with diesel engine from 1949 to 1954), (80 with diesel engine from 1954 to 1956), (820 with diesel engine from 1956 to 1958). (Item #: 102195, Ref: AR327R)$132.15
Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Item #: 157279, Ref: R28794)$8.60
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Item #: 121925, Ref: T23262)$6.00
Fuel Bowl, Short - This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4 inch bottom hole. It is used on John Deere (820 3 cylinder), 920, 1020, 1120, 1520, 300, 300B, 301, 301A, 302, 302A, 310B, 350, 350B, 380, (2020, 2120 Europe), 3120. Replaces original part number R56434 (Item #: 112513, Ref: 1039071M1)$4.50
Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296)$7.50
Fuel Injector, Remanufactured, AR49877, AR73673, AR88236, AR88239, AR89563, AR89564 - For John Deere tractor models 820, 830, 940, 1020, 1030, 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2020, 2030, 2040, 2130, 2150, 2155, 2255, 2320, 2350, 2355, 2355N, 2440, 2520, 2530, 2535, 2550, 2555, 2730, 2735, 2840, 2940, 2950, 2955, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3330, 3350, 3530, 4020, 4030, 4530, 5300, Compatible with John Deere Combine (s) 1075, 2240, 3300, 4400, 4420, 4435, 6600, Compatible with John Deere Harvester (s) 5200, 5400, 7440, 9900, 9910, 9920, Compatible with John Deere Construction and industrial models 210, 210C, 290D, 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 315, 315C, 350, 350B, 350C, 350D, 355D, 380, 400, 400G, 401, 401B, 401C, 401D, 410, 410B, 440, 440A, 440B, 444, 444C, 444CH, 444D, 444E, 444H, 450, 450B, 450C, 450D, 450G, 455D, 455G, 480, 480A, 480B, 480C, 482C, 540, 540A, 544, 544A, 550G, 555G, 570, 570A, 610, 610B, 650G, 710, 710B, 710C, Compatible with John Deere Hay Cutting (s) 2270, 2280, 2420, 3430, Replaces John Deere OEM number AR49877, AR73673, AR88236, AR88239, AR89563, AR89564, SE500822, SE501099, 22202, 27333, For a New version of this sku use Item #: 113965, (Item #: 210575)$155.01
No Picture
Fuel Line Clamp, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 349999-earlier), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2240 (s/n 349999-earlier), 2355, 2510, 2555, 3020, 3030, 3040, 3055, 3120, 3130, 3140, 3155, 3255, 4000 (s/n 201000-later), 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4520, 4630, 4640, 4840, 5020, 6030, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Combine(s) 4425, 4435, 6600, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 484, 5200, 5400, 5440, 5460, 5720, 5820, 7440, 7445, 7450, 7455, 9910, 9920, 9930, 9940, 9950, Compatible with John Deere Hay Cutting(s) 800, 830, 2250, 2270, 2320, 2420, Compatible with John Deere Sprayer(s) 6100, 6500, 6600, 6700, Replaces John Deere OEM nos R34766, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 448132)$1.51
No Picture
Fuel Plunger Injection Pump - For John Deere tractor models R, 70 (s/n 7017500 - later), 80, 820, 830 (s/n 8203099 - earlier), 840 (s/n 8400000 - later), Replaces John Deere OEM number AF3614, AF3614R, AR832, AR832R, Size 10mm Bosch, " Sold in sets of two ", (Item #: 129363)$259.98
Fuel Plunger Injection Pump - For John Deere tractor models 80, 720, 730 (s/n 7200000 - later), 820, 830 (s/n 8203100 - later), Replaces John Deere OEM number AF3614, AF3614R, Size 13mm Bosch, (Item #: 129365)$204.98
Fuel Return Tee - This Tee sits on top of the injector and connects to the diesel return line. (Item #: 176360, Ref: AT27622)$13.10
Fuel Shutoff Valve - For John Deere tractor models 70, 80, 720, 820, 830 (all with pony motor), Replaces John Deere OEM number AF1128R, AF2153R, For use with Marvel Schebler carbs TSX245, TSX475, TSX530, TSX562, Inlet: 1/8", Outlet: 3/8", (Item #: 119649)$36.00
Fuel Shut-Off Valve - This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Item #: 122256, Ref: R34656)$14.00
Fuel Tank - Fiberglass Fuel Tank is for tractor models: (1020, 1030, 1120, 1130, 1630, 820, 830, 920, 930) (2040, 2240 All SN<349999). Fuel Tank for European models and US 1530. (Item #: 103944, Ref: AR72910)$450.00
Fuel Tank - Metal - For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 920, 930, 1020, 1030, 1120, 1130, 1530, 1630, 2040 (s/n 349999-earlier), 2240 (s/n 349999-earlier), Compatible with John Deere Combine (s) 2240 (s/n 349999-earlier), Replaces John Deere OEM number AL24219, AR72910, AT31633, For fiberglass tank use Item #: 103944, Additional Handling and Oversize Fees Apply To This Item, (Item #: 146705)$530.00
Glass Body Fuel Filter - Diesel fuel filter element~ see-thru glass body. For most 1971 and up John Deere 4 and 6 cylinder tractors and combines produced in U.S.A. and equipped with Roosa-Master injection systems. Replaces Baldwin BF-909, Wix 33370, and Fram P1130. For 1530, 2040, 2240, 2440, 2630, 2640, 2840, 2940, 3020, 4000, 4030, 4040, 4230, 4240, 4320, 4400, 4420, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6600, 6602, 6622, 7020, 7520, 7700, 820, 830, 8430 (Item #: 111144, Ref: AR50041)$23.40
Grommet, Fuel Filler, Red - For tractor models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. Replaces R39613R, R82873, R34193. Fits around the fuel filler neck and acts as a insulator between the fuel neck and the hood. 2.295" I.D. and 3.965" O.D. Nitrile butadiene rubber (NBR). Replaces R39613R, A5157R, R82873, R34193 (Item #: 113650, Ref: R39613R)$18.20
No Picture
Injection Pump Fuel Plunger - For John Deere tractor models 80, 720, 730 (s/n 7200000 - later), 820, 830 (s/n 8203100 - later), 840 (s/n 8400000 - later), Replaces John Deere OEM number AF279, AF279R, Size 13mm Scintilla, Sold Individually, (Item #: 129364)$288.00
No Picture
Injection Pump Plunger and Barrel - Scintilla - For John Deere tractor models R, 70 (s/n 7017500 - later), 80 (s/n 8203099 - earlier), 820 (s/n 8203099 - earlier), 830 (s/n 8203099 - earlier), Replaces John Deere OEM number AR734, AR734R, Size is 10MM, sold as a set of 2, (Item #: 129362)$369.00
No Picture
Injector Packing Washer - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 2940, 3020, 4000, 4020, 4030, 4520, Compatible with John Deere Combine (s) 3300, 4400, 4420, 6600, 7700, Replaces John Deere OEM number R34764, Inside Diameter: .380", Outside Diameter: .565", Thickness: .128", (Item #: 176691)$1.50
Manifold Heater - Thermostart Intake Manifold Heater Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: AAU8491, AR63103, 47P606 (Item #: 118792, Ref: 3583543M2)$11.40
Precleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Item #: 168690, Ref: AF3583R)$28.30
Red Rubber Cover Only - For John Deere tractor models 50 (s/n 5018450-later), 60 (s/n 635350-later), 70 (gas), 320, 330, 420, 430, 435, 480, 520, 530, 620, 630, 720, 730, 820 (3 Cylinder), 830 (3 Cylinder), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (s/n 122999-earlier), 4000, 4010, 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Replaces John Deere OEM number R27183, For fuel cap with cover use Item #: 126517, (Item #: 126626)$18.00
Sediment Bowl Assembly - Large Bowl. 1/8 inch pipe thread to fuel line, 3/8 pipe to tank. For tractor models A, B, 60, 620, 70, 720, 730, 80, 820, 830. Fuel Strainer assembly with 2.25 inch bowl. This will replace the AUTOMATIC SHUT OFF assembly with a manual shut off for the late A and B models. Replacement bowl available as part S.65504. (Item #: 105393, Ref: S.61581)$20.00
Sediment Bowl Screen - 2" - For John Deere tractor models A (Styled and Unstyled), AI (Unstyled), ANH (Styled and Unstyled), AW (Styled and Unstyled), B (Styled and Unstyled), BN (Styled and Unstyled), BNH (Styled and Unstyled), BO (Unstyled), BR (Unstyled), BW (Styled and Unstyled), BWH (Styled and Unstyled), D (Styled and Unstyled), G (Styled and Unstyled), GH (Styled and Unstyled), GM (Styled), GN (Styled and Unstyled), H (Styled), HNH (Styled), HWH (Styled), 50 (Automatic Shut Off), 60 (Automatic Shut Off), 70, 80 (Pony Start Diesel), 520 (Automatic Shut Off), 530 (Automatic Shut Off), 620 (Automatic Shut Off), 630 (Automatic Shut Off), 720, 730, 820 (Pony Start Diesel), 830 (Pony Start Diesel), 840 (Pony Start Diesel), Compatible with John Deere Combine (s) 55, Replaces John Deere OEM number AA519R, (Item #: 121909)$5.70
Sending Unit, Fuel - Sending Unit, fuel (spade type terminals). For tractor models 1020, 1030, 1120, 1130, 1530, 1630, 1830 (serial number <294961), 2030 (serial number <294961), 2130 (serial number <294961), 2140, 2240 (serial number <349999), 2840, 3030, 3130, 820 (3 cylinder), 830 (3 cylinder), 920, 930. Replaces AT31619. (Item #: 114952, Ref: AT31619)$45.00
Vent Tube and Radiator Overflow Packing - This packing installs in the nut that is on either end of your vent tube or one end of your radiator overflow tube. It is used on John Deere A, B, D, G, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830. Replaces John Deere Part Number B60R (Item #: 183845, Ref: B60R)$7.30
Gaskets
Pony Motor Crankshaft Seal - This Pony Motor Crankshaft Seal Measures 1.000" I.D., 1.503" O.D., 0.250" Fits: 70 (Used as a Pony motor crankshaft seal (2 used per tractor) on Diesel models. Also used as a Pony Motor input shaft seal on Diesel models.), 720 (Used as a Pony motor crankshaft seal (2 used per tractor) on Diesel models. On the flywheel side up to SN: 721489 and on the crankshaft gear side all serial numbers. Also used as a Pony Motor input shaft seal on Diesel models.), 730 (Used as a Pony Motor input shaft seal on Diesel models.), 80 (used as a Pony motor crankshaft seal (2 used per tractor). Also used as a Pony Motor input shaft seal. ), [820 2 cylinder, 830 2 cylinder (Used as a Pony motor crankshaft seal (2 used per tractor). Also used as a Pony Motor input shaft seal. )] Sold individually. Replaces: AF2167R (Item #: 122678, Ref: 43800D)$5.50
Gauges
Amp Gauge - For tractor models A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720, 730, 820, 830. This gauge has a plain face without a John Deere logo. This 20-0-20 ammeter has a metal base, glass lens, black faceplate and a black bezel. Replaces AM1864T, AF2749R. (Item #: 150259, Ref: R3803)$26.60
Fuel Gauge - This Fuel Gauge is used multiple John Deere tractors and combines. It is a 12 volt illuminated gauge with a 2.047 inch body outside diameter. The length of the gauge is 1.87 inches. It replaces original John Deere part numbers AL24187, AL18155, AL24294 (Item #: 101919, Ref: AL24294)$24.20
Fuel Gauge 12 Volt - For John Deere tractor models 520, 530, 620, 630, 720, 730, 820, 830, Replaces John Deere OEM number AF2739R, AF2170R, Plug Style, 12 Volt, (Item #: 160361)$5.98
Fuel Gauge, 12 Volt - This electric fuel gauge fits 2 Cylinder models; 520, 530, 620, 630, (720, 730 Gas), (720, 730 Diesel (12/24 volt electric start), (820 2 cylinder, 830 2 cylinder 12/24 volt electric start). This fuel gauge is calibrated to the original resistance, 0 - 30 OHMs, positive ground system. Replaces: AF2721R (Item #: 121633, Ref: AF2721R)$42.98
Fuel Gauge, 12-Volt Negative Ground - This electric fuel gauge fits 2 Cylinder models; 520, 530, 620, 630, (720, 730 Gas), (720, 730 Diesel (12/24 volt electric start), (820 2 cylinder, 830 2 cylinder 12/24 volt electric start). This fuel gauge is calibrated to the original resistance, 0 - 30 OHMs, Negative ground system. Replaces: AF2721R that has been changed to Negative Ground. (Item #: 140602, Ref: JDS3476)$33.00
Fuel Gauge, 6 Volt - This 6 volt positive ground fuel gauge is used on the following two cylinder diesel tractors with pony start motors: 70, 720, 730, 80, 820, 830. The gauge reads from 0 - 30 Ohms. Replaces original part numbers AF2170R, AF2739R (Item #: 140603, Ref: AF2739R)$41.00
Fuel Sending Unit - This fuel sending unit is used on the following 2 cylinder tractors: 520, 530, [620, 630 (General Purpose, Standard or Orchard.)], [70, 720, 730 (Gas, LP, and Diesel)], 80, 820, 830, 840. It will work for 6 or 12 volt, positive or negative ground providing the appropriate gauge is used. This fuel sending unit is properly calibrated to the original resistance, 0 to 30 OHMs. It replaces original part numbers AB5139R, AF2173R, AR1112R (Item #: 159048, Ref: AR1112R)$58.00
Oil Gauge Adapter Fitting - This Oil Gauge Adapter Fitting is 1/8 inch NPT female to 3/16 inch tubing female. It is used on some gauges without removable fitting. (Item #: 178157, Ref: 9N18685)$4.90
Oil Pressure Gauge - For John Deere tractor models 70, 80, 720, 730, 820, 830, 840, Replaces John Deere OEM number AF2729R, AF2868R, Black Face, Black Bezel, 0-55 PSI, (Item #: 152858)$35.00
Tachometer - This new tachometer fits; A serial number 648000 and up, AO and AR serial number 272000 and up, B serial number 201000 and up, [ 50, 520, 530, 60, 620, 630, 70, 720, 730 (Gas/Lp) ], [ 70, 720, 730 (Diesel) ], [ 80, 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Serviceable, Face plate will have the wrong Mph.) ]; Replaces: AB5132R, AB5134R, AF1719R, AF2066R, AF2698R, AR20055R, AR20825, AR20836, AR21661, AR21662, AR21663, AR21663R, AR21664R (Item #: 150247, Ref: R4611)$120.00
No Picture
Tachometer Cable - 23" total length. For tractor models 1020, 1130, 1530, 1630, 820, 830, (2040, 2240 SN# up to 349999). Replaces AT19905. (Item #: 121539, Ref: AL23837)$18.20
Temperature Gauge Black Face - For John Deere tractor models A (styled), D (styled), G (styled), M (mid 1952-later), R (mid 1952-later), 40 (1952-later), 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840, Replaces John Deere OEM number AM3950T, AA6295R, AA7263R, AF2192R, AF2774R, AM2444T, AM3092T, AR20783, AT13849T, Black Bezel, Black Face, Lead Length: 48", For temperature gauge with a white face use 150249, (Item #: 150248)$30.00
Water Temperature Gauge - Black face. 72 inch lead. Without John Deere Logo. 140-230. For tractor models A, AR, B, D, G, M, R, 40, 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840. Also replaces AA6295R, AA7263R, AM2444T, AT13849T, AR20783R. (Item #: 150251, Ref: AR490R)$30.00
Hitch / Drawbar
Complete Non-Adjustable Lift Link Assembly - Left Hand - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM number R48595, T25836, Fit left hand side, Rod Length: 21-3/4", Min / Max Length: 24" / 31", For assembly with 17.5" rod use Item #: 111346, (Item #: 130489)$91.00
Drawbar - For John Deere tractor models 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1750, 1950, 2020, 2120, 2150, 2155, 2255, 2355, Replaces John Deere OEM number T29898, .796" dia front holes, Holes are 1.250", 2.880", 8.690" from front, Length: 36.750", Width: 2.000", Height: 1.250", (Item #: 124951)$120.00
Drawbar - Straight 1.250 x 2.50 x 36.750.781 Holes at 1.125, 2.750, and 8.578 For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2240, 2350, 2355, 2550, 2630, 2640, 2750, 2755, 2855. Replaces R61126 (Item #: 110255, Ref: R3092)$127.00
Drawbar Front Support - This Front Drawbar Support fits multiple John Deere models. It will replace original part number T21672 if you also use L32016 Front Drawbar Pin and L31849 Front Drawbar Pin Adapter. It replaces original part number AL27203 (Item #: 155460, Ref: AL27203)$64.00
Drawbar Front Support Pin - This Drawbar Front Support Pin fits multiple John Deere Models. It can replace AT19850 when you also replace AL27203 Support and L31849 Pin Adaptor. (Item #: 155461, Ref: L32016)$7.50
Drawbar Front Support Pin Adapter - This Drawbar Front Support Pin Adapter fits multiple John Deere Models. It is used in conjunction with L32016 Pin and AL27203 Bracket to update older style front draw bar supports. (Item #: 155462, Ref: L31849)$7.50
Drawbar, Offset - 2.250 Offset 1.25" x 2.50" x 36.625" (.781 Holes at 1.125, 2.750, and 8.575") For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 1640, 1641, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2141, 2240, 2250, 2251, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2850, 2855, 820, 830. ADDITIONAL $15 SHIPPING DUE TO WEIGHT. Drawbar pin available as part# L32016. (Item #: 108511, Ref: L29020)$136.00
Drawbar Pin - This Drawbar Pin is used on John Deere 820, 920, 1020, 1120, 1520, 2020, 2120, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2440, 2640, 300B. It replaces AT19850 (Item #: 155271, Ref: AT19850)$37.00
No Picture
Front Drawbar Pin Adapter, Used - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, Compatible with John Deere Construction and industrial models 300B, 302, 302A, 401B, 401C, 401D, Replaces John Deere OEM number L31849, For a new version of this item use Item #: 155462, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436163)$4.01
Front Drawbar Support, Used - For John Deere tractor models 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, Compatible with John Deere Construction and industrial models 300B, 302, 302A, 401B, 401C, 401D, Replaces John Deere OEM number AL27203, For a new version of this item use Item #: 155460, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 455460)$38.40
Front Drawbar Support, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos T21672, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497258)$60.01
Front Pull Arm, Left Hand - Left Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640 (Item #: 160666, Ref: AT30151)$367.00
Front Pull Arm, Right Hand - Right Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640. (Item #: 128486, Ref: AT30150)$380.00
Hydraulic Lift Arm, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2355N, 2440, 2630, 2640, 2755, 2855N, Replaces John Deere OEM number T29931, For a new version of this item use Item #: 125402, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 425402)$93.01
Leveling Arm Pin - Used for attaching the leveling arms to the upper lift arms, this Pin is used on John Deere models 820, 830, 840, 920, 930, 940, 1020, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840 serial number 429999 and below, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3350. (Item #: 121437, Ref: AT21754)$15.10
Leveling Arm Screw - Used on John Deere 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Leveling Arm Screw is 17.50 inches long. Replaces T25835 (Item #: 165768, Ref: T25835)$24.37
Leveling Arm Screw - Measuring 15.187 inches over all length, this Leveling Arm Screw is used on John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces T24908 (Item #: 110317, Ref: T24908)$17.80
Leveling Assembly Housing - Used with telescoping 3pt pull arms, the rod on this Housing Assembly is 15.00 inches long. Used on John Deere models: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces L28374-15, L2837415 (Item #: 109393, Ref: L2837415)$138.00
Leveling Assembly Housing - Used with non-telescoping 3pt pull arms, the rod on this Housing Assembly is 17.50 inches long. Used on John Deere models: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces L28374-17, L2837417 (Item #: 111632, Ref: L2837417)$151.84
Leveling Box Handle - Used on tractors with telescoping 3-point pull arms, this part replaces John Deere part number T21559, T28346 (Item #: 118291, Ref: T21559)$17.00
Lift Arm Pin - This Lift Arm pin is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It replaces original part number AR55695, T22714 (Item #: 162626, Ref: AR55695)$10.20
Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable with 17.50" (hole-to-hole) lift link rod. Fits 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Item #: 156785, Ref: AR44556)$79.00
Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable (while in use). Min / Max Length: 21-1/2 inches - 28 inches. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. Replaces AR44554, T25836, R48595, T21901 (Item #: 121432, Ref: AR44554)$76.00
Lift Link Assembly, Right Hand - Right Hand. 15 inch rod length. Closed length 21-1/4" Extended length 27-1/2" For tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. R48595, RE16370, T24908 (Item #: 108552, Ref: AR44552)$150.00
Lift Link Assembly, Right Hand - Right Hand. 17.5" rod length Closed Length: 23" Extended Length: 29-1/2". Housing Assembly. For: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Item #: 150871, Ref: AR44551)$115.00
Lift Link Ball - Used on John Deere models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1950, 2020, 2030, 2040, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3255, 400, 401, 401B, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T22399 (Item #: 170398, Ref: T22399)$20.30
Lift Link Housing Shaft - Used in the housing of the adjustable leveling are assembly, this part fits John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3155, 3255, 400, 401, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T21558 (Item #: 176718, Ref: T21558)$32.02
Lift Link Rod - Used on the non-adjustable lift arm, this Lift Link Rod measures 19.125 inches overall. It includes T21901 Lift Rod Ball. (Item #: 110530, Ref: T24909)$82.00
Lift Link Rod - For John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Lift Link Rod, comes with T21901 Lift Rod Ball. The overall length is 21.750 inches long. (Item #: 109389, Ref: T25836)$72.98
No Picture
Lift Link Rod - 17 1/2 Long For Non-Adjustable Lift Link For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755 (Item #: 110530, Ref: R3113)$82.00
Lower Lift Arm Ball - Measuring 3/4 inch inside diameter, 1 3/16 inch outside diameter, and 1 3/8 inch wide. This part replaces John Deere part number T21901. Used on John Deere 1020, 1530, 2020, 2030, 2040, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2855N, 2940, 2950, 3030, 3055, 3150, 3155, 820, 830 (Item #: 112054, Ref: T21901)$9.80
Lower Lift Yoke - Used on John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Lower Lift Casting replaces John Deere part number R48595 (Item #: 111346, Ref: R48595)$42.00
Lower Link Adapter Nut - Used on telescoping lower lift arms, this is a 1-5/8 inch adapter nut. It replaces John Deere part number T21758 (Item #: 173022, Ref: T21758)$21.90
No Picture
Pull Arm - Left or Right Hand Heavy Duty - Non-Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2630, 2640, 2750, 2755, 2855 (Item #: 111387, Ref: R3128)$320.00
Pull Arm, Heavy Duty, Cat II, RH/LH - 33.50" Center to center. Hole towards center is not as pictured. For tractor models JD301, JD400, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 302, 401B, 401D, 820, 830, 300B, 302A, 401C. Replaces AT19849. (Item #: 111387, Ref: AR77530)$320.00
Pull Arm - Lower, Category 1 - For John Deere tractor models 820 (3 Cyl), 830 (3 Cyl), 1020, 2040 (s/n 349999-earlier), Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 401B, 401C, Replaces John Deere OEM number AT56648, AT19857, AT28057, (Item #: 164744)$284.00
Rear Pull Arm, Telescoping - Left or Right Hand Telescoping Style. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 3010, 3020, 4000 and 4020 (SN# 201000 and above), 4030. Also replaces OEM# AL24137. (Item #: 108900, Ref: AR28570)$155.00
Sway Block Support Plate - Left Hand, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2630, 2640, 2750, 2755, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos AT20168, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498403)$49.01
Sway Block Support Plate - Right Hand, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2630, 2640, 2750, 2755, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos AT20167, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498404)$49.01
Top Link Bracket - For John Deere tractor models 820, 830, 920, 1020, 1120, 1520, 1530, 1830, 2020, 2030, 2120, 2130, 3030, 3120, 3130, Replaces John Deere OEM number T21685, (Item #: 160341)$43.00
Top Link Bracket - For Category I hitches on: 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855. (Item #: 160341, Ref: T21685)$43.00
Top Link Bracket, Used - For John Deere tractor models 820, 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2130, 2140 (s/n 430000-later), 2240, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM number T21685, For a new version of this item use Item #: 121440, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421440)$24.01
Engine Oil Filler Cap, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 2940, 3040, 3120, 3140, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970, Compatible with John Deere Combine(s) 3300, 4400, 4420, 4425, 4435, 6600, 6620, 7700, 7720, 8820, 9400, 9410, 9450, 9500, 9510, 9550, 9600, 9610, 9650, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9900, 9910, 9920, 9930, 9940, 9950, 9960, Compatible with John Deere Construction and industrial models 210, 300 (Series), 415, Compatible with John Deere Hay Cutting(s) 2280, 2320, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, Replaces John Deere OEM nos T20294, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498475)$10.01
Hydraulic Coupler, RH, Used - For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 3030, 3040, 3120, 3130, 3140, Compatible with John Deere Construction and industrial models 300, 300B, Replaces John Deere OEM nos T22243, RH Hand Coupler for Single Hydraulics, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499333)$263.01
Hydraulic Pump - For John Deere tractor models 820, 830, 920, 930, 2040, Replaces John Deere OEM number AR55346, AL37750, AL36551, AL36552, AL36553, 11cm, .69ci, For tractor with power steering and open center hydraulics, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For 6-5/8" pump use Item #: 107494, (Item #: 128340)$484.00
12 Volt Bulb - This bulb allows you to use the AR77326 work light for 12 volt applications. (Item #: 118520, Ref: S.51140)$5.20
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Item #: 111242, Ref: 28A116)$14.00
Headlight Lens - Replacement glass lens is 4.75 inch outside diameter for headlamp assemblies AA3075R, AF3817R. For tractor models A, B, D, R, 70D, 80, 820, 830. (Item #: 111330, Ref: GC200)$13.90
Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: ( A, B with sheet metal dash), 70 gas and diesel, 730 gas and diesel, D up to serial number 143800, 720 gas and diesel, 50, 60, 630, AO, AR, H, R, 80, 520, 530, 620, 720, (820, 830 2 cylinder). Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R)$12.60
Headlight Washer - Used with light part number 164089AS. For the following tractors: A, B, G, 50, 60, 70, 630, 730, 4020, R, 80, 520, 530, 620, 720, 820, 830, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4320, 4520, 4620, 5010, 5020, 6030, 2040, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950 (Item #: 154899, Ref: 504781M1)$5.40
No Picture
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED)$33.00
Lens - Lens, combination front or rear light, for 5 inch diameter lights, for light TP-AA3075R on tractors: A, B, D, G, R, 7 0D, 7 20D, 730D, 80, 820, 830. Manufactured to restoration standards. For 70, 720, 730, 80, 820, 830, A, B, D, G, R Replaces A2731R (Item #: 111330, Ref: GC200)$13.90
Light Bezel - Our rubber light bezel can be used as front, rear or both, when using a guide style light without Glare Guard. The bezel has an outer diameter of 5.045 inch, inner diameter of 3.250 inch, measures 1.325 in width, and has 4 inner slots. Replaces 10P2571, 164475A, R31250 (Item #: 184424, Ref: R31250)$25.30
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91)$9.30
Light Mounting Bracket - Bracket Clamp sold seperately as Part # R27460 - 2 clamps required per bracket. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. Replaces: TI9178, TI2443 (Item #: 123453, Ref: T12443)$45.00
Light Mounting Clamp - Half Clamp for clamping mount part number T12443. 2 used per bracket. Price is for 1. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Item #: 123454, Ref: R27460)$13.40
Light Ring - The dimensions of this light ring with screw are 4.5 inches in height and 0.885 inches in width. Replaces 10P1552, 230233, 371445R91, 371449R91, 371451R91, 70230233, AF3891R, B50255, B50258, JDS676. Verify measurements before ordering. Most models used more than one headlight style in production. (Item #: 154743, Ref: 371449R91)$22.60
No Picture
Rear Combo Light - For 50, 520, 530, 60, 620, 630, 70, 720, 730 - ALL GAS. 70, 720, 730, 820, 830 - ALL DIESEL WITH ELECTRIC START. 12V Rear Combo Light, 5". (3869R) (Item #: 105347, Ref: AA5199R)$67.00
No Picture
Rear Combo Light - For 70, 720, 730, 80, 820, 830 - ALL WITH DIESEL WITH PONY MOTOR. 6V Rear Combo Light, 5". (3870R) (Item #: 105346, Ref: AF3088R)$65.00
Ring - Moulding trim ring for headlights or rear lights, for light TP-AA3075R.* Manufactured to restoration standards. For tractor models 70, 720, 730, 80, 820, 830, A, B, D, G, R. (Item #: 124994, Ref: TP-AA3241R)$13.80
Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357)$18.70
Work Tail Light - 2 wire connectors. 6 Volt. For tractor models 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. If you have a 12 volt application, order bulb # S.51140 for an additional cost. (Item #: 105346, Ref: AR77326)$65.00
Miscellaneous
Gear Shift Boot - For John Deere tractor models 820 (3 Cyl), 830 (3 Cyl), 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1641, 1830, 1840, 2020, 2030, 2040, 2120, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 2955, 3030, 3040, 3050, 3120, 3130, 3140, 3350, Compatible with John Deere Construction and industrial models 300, 301, 302 (s/n 252675-later), 400, 401, Replaces John Deere OEM number L31055, (Item #: 125319)$3.40
No Picture
Gearshift Lever, Used - For John Deere tractor models 820 (3 cylinder, s/n 092219-later), 830 (3 cylinder, s/n 092219-later), 930, 1020, 1030, 1120, 1130, 1530, 1630, 1830, 2020, 2030, 2120, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B (s/n 252675-later), 301 (s/n 252675-707399), 301A (s/n 252675-707399), 302 (s/n 252675-707399), 302A (s/n 252675-707399), 400, 401 (s/n 252675-later), 401B (s/n 252675-707399), 401C (s/n 252675-707399), Replaces John Deere OEM number R53817, For a new version of this item use Item #: 152054, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436097)$18.48
Oil Transmision Filter Cover, Used - For John Deere tractor models 820, 830, 920, 1020, 1120, 1520, 1530, 1830, 2020, 2030, 2130, 2510, 2520, 2630, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 7020, 7520, 8430, 8630, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM nos R39796, R34290, Depth: 4-1/4", Diameter: 5-1/2", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498835)$30.01
Thrust Washer - For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 1020, 1520, 1530, 1830, 2020, 2030, 2040, 2150, 2240, 2255, 2440, 2630, 2640, Replaces John Deere OEM number T141566, T21424, (Item #: 161854)$2.30
Umbrella Bracket Assembly - For tractor models with Battery Box Mounted Seats: 50, A, 60, B, G, 520, 530, 620, 630, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, R. (Item #: 179139, Ref: AA4206R)$92.51
Oil System
Dipstick, Used - For John Deere tractor models 820 (3 Cyl), 830 (3 Cyl), 920, 930, 1020, 1030, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040, 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2355, 2440, 2520, 2555, 2755, 2840, 2940, 2950, 2955 (s/n 765516-earlier), 3055, 3150, 3155 (s/n 738221-earlier), 3255, Compatible with John Deere Combine(s) 2240, Compatible with John Deere Construction and industrial models 300, 410, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2420, Replaces John Deere OEM number AT21534, For a new version of this item use Item #: 121171, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435771)$5.01
Oil Pressure Sending Unit - For tractor models 1010, 1020, 1520, 1530, 2010 serial number 42001 and up, 2020, 2030, 2040, 2150, 2250, 2155, 2355, 2240, 2350, 2550, 2355, 2555, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2855, 2840, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 3155, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 720, 730, 820, 830, 840, 8440, 8640, 8630. Note, there are a couple different styles of this part that work equally well, but are cosmetically different. Yours may arrive looking different than the one shown. Replaces AF3882R, AR27977, AT85174 (Item #: 121439, Ref: AR27977)$10.50
Paint, Classic Green, 1 Gallon - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102408, Ref: TP215GAL)$60.00
No Picture
Paint, Classic Green, 1 Quart - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102407, Ref: TP215QT)$23.50
No Picture
Paint, Classic Green, Spray Can - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP215SP)$10.30
PTO / Driveline
Backrest Support, Used - For John Deere tractor models 820, 830, 2510, 2520, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 9370R, Compatible with John Deere Construction and industrial models 570, 570A, 600, 670, 670A, 672A, 690, 690A, 690B, 700, 760, 760A, 770, 770A, 772A, Replaces John Deere OEM number R34272, For a new version of this item use Item #: 109347, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430331)$14.51
Bearing Housing, without Bearing - For tractor models 820, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2130, (2240 SN# up to 349999), 2440, 2630, 2640. (Item #: 170410, Ref: T21996)$219.00
Clutch Disc, (PTO) - With Facing. For tractor models 50 serial number 5032350 and up, 60 serial number 6060700 and up, 70 serial number 7039400 and up, 80, 520, 530, 620, 630, 720, 730, 820, 830. Replaces RE29784. (Item #: 114821, Ref: AR1294R)$23.10
Clutch Disc, (PTO) - For tractor models (50 SN# 5032350 and up), 520, 530, (60 SN# 6060700 and up), 620, 630, (70 SN# 7039400 and up), 720, 730, 80, 820, 830. (Item #: 114821, Ref: RE29784)$23.10
Clutch Plate (PTO) - With facing. For tractor models 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830. Also replaces RE29784. Price is for each, you may need more than one depending on your application. (Item #: 114821, Ref: AR1293R)$23.10
Lower Lift Link Yoke, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, Compatible with John Deere Combine(s) 2240, Replaces John Deere OEM number R48595, For a new version of this item use Item #: 111346, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411346)$23.76
PTO Bearing Housing / Quill - This is the Bearing Housing / Quill, Rear PTO Shaft used on 820, 920, 1020, 1120, 1520, 2020, 830, 1530, 2030, 2130, 2630, 940, 1040, 1640, 2040, 2240, 2440, 2640, 300, 400. Replaces T22237, R47514 (Item #: 172961, Ref: R47514)$236.00
PTO Clutch Drum Inner Seal - This PTO Clutch Drum Inner Seal measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. [50, 60, 70 (PTO Clutch Drum Inner Seal on following (Rowcrop, Orchard, HiCrop and Standard) with Engine driven live PTO) ], [ 520, 530, 620, 630, 720, 730 (PTO Clutch Drum Inner Seal on following (Rowcrop, Orchard, HiCrop and Standard) with Engine driven live PTO. Also used For Dual power control valve control arm seal.) ], [ 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Used For Dual power control valve control arm seal.)]; Replaces: AA5247R, AR1355R, AT11492, RE14867. (Item #: 165141, Ref: 195501M1)$5.15
PTO Plate, Remanufactured, AT21675 - For John Deere tractor models 301, 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2440, 2450, 2550, 2630, 2640, Replaces John Deere OEM number AT21675, AL19092, Clutch Size: 9", Clutch Hub: 1-1/2", Clutch Spline: 23, Clutch Center: Spring, For a New version of this sku use Item #: 150755, (Item #: 205870)$109.01
PTO Shaft - This PTO Shaft is 31.250 long, 6 spline, 540 RPM. It is used on some of the following: 1020 (W/ HEAVY DUTY PTO BEARINGS), 1030, 1040 (Serial Number 437370 and up), 1120 (W/ HEAVY DUTY PTO BEARINGS), 1130, 1140 (SN 437370>), 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 2030, 2040 (Serial Number 350000 and up), 2130, 2140, 2150, 2155, 2240 (Serial Number 350000 and up), 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2750, 2755, 2855, 820 (3 Cyl.) (W/ HEAVY DUTY PTO BEARINGS), 840 (Serial Number 437370 and up), 920 (W/ HEAVY DUTY PTO BEARINGS), 940 (Serial Number 437370 and up) It replaces L28712, L38806. Verify measurements and OEM Numbers. (Item #: 162347, Ref: L38806)$386.00
PTO Shaft - 540 RPM, Used - For John Deere tractor models 820 (3 Cyl., Witth Heavy Duty PTO Bearings), 840 (s/n 437370-later), 920 (Witth Heavy Duty PTO Bearings), 940 (s/n 437370-later), 1020 (Witth Heavy Duty PTO Bearings), 1030, 1040 (s/n 437370-later), 1120 (Witth Heavy Duty PTO Bearings), 1130, 1140 (s/n 437370-later), 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 2030, 2040 (s/n 350000-later), 2130, 2140, 2150, 2155, 2240 (s/n 350000-later), 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2750, 2755, 2855, Replaces John Deere OEM number L38806, 31.250" Long, 6 Spline, For a new version of this item use Item #: 162347, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442502)$206.01
PTO Shaft Seal - This Seal has multiple applications for John Deere, including; PTO seal, differential brake pinion shaft seal, inner bearing housing seal, direction reverser seal, upper final drive outer pinion shaft seal, front wheel assist transfer box seal, and others. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Verify measurements or OEM part number before ordering. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779)$7.70
PTO Shaft, Used - For John Deere tractor models 301, 820, 830, 1020, 1030, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040, 2040 (s/n 430000-later), 2140 (s/n 430000-later), 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300B, 301A, 302, 302A, 401B (s/n 339687-later), 401C, 401D, Replaces John Deere OEM number R69509, Splines: 6 and 21, Length: 31 1/4", Raised section on shaft for bearing guides., With snap rings use Item #: 498486, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429331)$390.01
PTO Shield, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2950, 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos R69628, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 425219)$60.01
PTO Shift Collar, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2755, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM nos T26337, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437950)$60.01
Seats
Arm Rests - Pair - Black Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 178435, Ref: R1190)$106.00
Arm Rests, Pair - Yellow Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 110196, Ref: R1188)$108.00
Backrest, Black - Superior, weatherproofed covers, material identical to cushions. Tee-nuts and cap screws included for easy installation. Holes are pre-set and drilled. Black. For tractor models A, B, G, 50, 60, 70, 520, 620, 720, 730, 820, 830 series (Replaces AR21965R) (19-1/2x5-1/4). (Item #: 101303, Ref: JT300B)$53.00
Deluxe Seat Cushion Center Support, Used - For John Deere tractor models 820, 830, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7520, Replaces John Deere OEM nos R27785, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430367)$10.01
Seat Adjustment Handle - For the following John Deere models with Float Ride seat: 50, 520, 530, 620, 630, 720, 730, 80, 820 (2 cylinder), 830 (2 cylinder), 840 (2 cylinder with serial number 8400200 and up). Replaces AF3427R. (Item #: 105324, Ref: 1016119M91)$28.60
Seat Back - Yellow, wood back. 6 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. Picture shows seat bottom. Not included in price. Order P/N R0172 if needed. (Item #: 110194, Ref: R0173)$78.00
Seat Bracket Set - This Seat Bracket Set is used with JD5678 seat cushion set. Kit contains: (1) R34272 back support bracket, (1) R27785 rear armrest support bracket, (1) R31512 RH seat bracket and (1) R31513 LH seat bracket. (Item #: 108180, Ref: SBK400)$26.00
Seat Pin and Bushing Kit - For 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat (Item #: 108832, Ref: R2483)$69.00
Seat Shock Absorber - For 520, 530, 620, 630, 720, 730, 820, 830. Seat shock absorber with bushings for tractor models with Float Ride Seat. Center to center extended is 13 inches, compressed 8 3/4 inches. Replaces AF3426R. (Item #: 109874, Ref: R2481)$52.00
Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1)$2.30
Seat Spring, Rubber - Right Hand For 50, 80, 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat. (Item #: 105349, Ref: AR39648)$51.00
Seat Spring, Rubber - Left Hand For 50, 80, 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat. (Item #: 105350, Ref: AR39649)$47.00
Seat Tie Bar Plate - This Seat Tie Bar Plate is for 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat (Item #: 124287, Ref: R3890)$49.00
Wrap Around Seat Assembly - Yellow - For tractor models 1020, 1030, 1120, 3030, 3040, 3130, 3140, 820, 830, 920, 930, 2280, 2320, 2420, 2150, 2155, 2240, 2250, 2350, 2355, 2440 Late, 2550, 2555, 2640 Late, 2750, 2750, 2840, 2940, 2950, 2955. Add an Additional $15 for shipping due to weight. (Item #: 101375, Ref: W222YL)$100.00
Sheet Metal / Body Parts
Battery Base - Use with R1521 and R1522 For B (From S# 201000), R, 80, 820, 830 with Pony Motor. Replaces OEM# AR1326R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126477, Ref: R3285)$68.00
Battery Box - For 820, 830. All With Pony Motor and NOT Float Ride Seat. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126454, Ref: AR1565R)$254.00
No Picture
Battery Cover - Battery Cover for JD 820, 830, 1020, 1030, 1120, 1130, 1530, 1630, 1830, 2020, 2030, 2120, 2130, 2240, 2440, 2630, 2640. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104081, Ref: S-AT20026)$39.00
Battery Cover - For 820 with 3 cyl, 830 with 3 cyl, 1020, 1030, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, 2640. Battery Cover. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104081, Ref: AT20026)$39.00
Fender Extension, LH - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2150, 2155, 2240, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 830, 920, 930. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AL25635, AL66516 (Item #: 103963, Ref: AL66516)$26.60
Fender Extension, RH - This Fender Extension, (Side Step) is for tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2150, 2155, 2240, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 830, 920, 930. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103962, Ref: AL66515)$20.98
Fender, LH - For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2750, 2755, 2855N, 300B, 820, 830. Fender, LH. Fender, shell style with braces and brackets welded in place. Comes primed. Replaces AR51407, AR51408, AT20779, AT27148. (Item #: 103961, Ref: AL28585)$130.00
Fender, RH - For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2750, 2755, 2855N, 300B, 820, 830. Fender, shell style with braces and brackets welded in place. Comes primed. Fender, RH. Replaces AT20777, AT27146. (Item #: 103960, Ref: AL28584)$130.00
Fender Set - Right Hand and Left Hand - For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1040, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, 480, Replaces John Deere OEM number AL28584, AL28585, AT20777, AT20779, Left Hand and Right Hand Set, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For Fender - Right Hand use Item #: 103961, Additional Handling and Oversize Fees Apply To This Item, (Item #: 140628)$265.00
Front Stack Weight - Aftermarket, Used - For John Deere tractor models 820, 920, 1020, 1120, 1520, 2010, 2020, 2030, 2120, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2750, 2755, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, Replaces John Deere OEM number R27643, Replaces John Deere Casting nos BW719, Aftermarket, For a new version of this item use Item #: 168974, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 456144)$119.40
Front Stack Weight, Used - For John Deere tractor models 820, 920, 1020, 1120, 1520, 2010, 2020, 2030, 2120, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2750, 2755, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, Replaces John Deere OEM number R27643, Weight: 85, For a new version of this item use Item #: 168974, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499929)$155.01
Grill Screen - For one piece wrap-around style For R, 80, 820, 830. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 112563, Ref: R293R)$133.00
Side Screen - POWDER COAT GREEN 13 3/4 inches x 17 inches. For 820 (German), 830, 1020, 1530, 2040, 2240. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. 2 used per tractor. (Item #: 101931, Ref: AR72949)$66.00
No Picture
Step Assembly - For 80, 820, 830. OEM# F3195R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 179454, Ref: R4291)$63.00
Toolbox - For 80, 820, 830. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 180595, Ref: R2469)$136.00
Steering
Axle Knee, Left Hand, Used - For John Deere tractor models 301, 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2150, 2240, 2255, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models TC44H, TC54H, TC62H, 300, 301, 400, 401, 444H, 444HLL, 450J (s/n 159986-earlier), 544H, 544HLL, 550J (s/n 159986-earlier), 550K (s/n 217276-275527, 275977-303907), 624H, 624HLL, 650J (s/n 159986-earlier), 650K (s/n 216396-275533, 275978-303837), Replaces John Deere OEM number AT22222, Replaces John Deere Casting nos T21512, Left Hand, Swept Back Axle, Height: 9 1/2", For Axle Knee, Right Hand use Item #: 430382, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430383)$234.01
Axle Knee, Right Hand, Used - For John Deere tractor models 301, 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2150, 2240, 2255, 2440, 2630, 2640, Compatible with John Deere Lawn and Garden(s) 300, 400, Replaces John Deere OEM number AT22221, Replaces John Deere Casting nos T21511, Right Hand, Swept Back Axle, Height: 9 1/2", For Axle Knee, Left Hand use Item #: 430383, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430382)$234.01
Ball Joint, 11 Notch - A= 12.250", B= .781". For tractor models 1120, 1350, 1950N, 2150, 2255, 820, 830, 840, 920, 930, (1750, 2155, 2355N, 2855N, 1040 all with swept back axle), 1030. (Item #: 102249, Ref: AL39022)$27.80
Bellcrank - For tractor models (2440, 2640 serial number up to 308804 with 49 inch-79 inch swept back adj. axle), (2040, 2240 serial number up to 349999 with swept back adj. axle), (1530 with straight or swept back adj. axles), (JD301, JD401, 2630, 820, 830 with swept back adj. axle), (1020, 2020, with 44 inch-66 inch or 48 inch-78 inch swept back adj. axle), (1520 with 48 inch-78 inch swept back adj. axle), (JD300, JD400 without loader/backhoe with swept back adj. axle). (Item #: 104915, Ref: AR92944)$229.98
Bellcrank - Casting #T21504. For tractor models (300, 301, 400, 401, 820, 830, 1020, 1520, 1530, 2020, 2630 all with swept back axle), (2030 SN# up to 187300 with swept back axle), (2040, 2240 SN# up to 349999 with swept back axle), (2440, 2640 SN# up to 308804 with swept back axle). (Item #: 104914, Ref: AT19794)$299.98
Bellcrank, Used - For John Deere tractor models 820, 830, 920, 1020, 1120, 1530, 2020, 2030 (s/n187300-earlier W/Swept Back Adjustable Axle), 2040, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, Replaces John Deere OEM number AT19794, Replaces Casting nos T21504, For a new version of this item use Item #: 104914, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404914)$184.01
Center Steering Arm Pin - Please check dimensions before ordering. Pin is 5.690" long X 1.499" diameter. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Center Steering Arm Pin. Used with Center Steering Arms: AR91812, AR92945, AR91811 and AR92944. (Item #: 173277, Ref: 91811S)$45.00
Center Steering Arm Pin Bushing - Measuring 1.500 inches inside diameter, 1.875 inches outside diameter and 1.000 inches wide, this bearing is used on John Deere models: 820, 1020, 1520, 2020, 3120, 830, 1530, 2630, 3030, 3130, 2040, 2240, 2444, 2640, 2840, 2150, 2155, 301, 302, 401, 401B (Item #: JD8827)$21.76
No Picture
Differential Cross Shaft, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 350000-later), 2040 (s/n 349999-earlier), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-later), 2240 (s/n 349999-earlier), 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2840, 2855N, 2940, 2955 (s/n 765516-earlier), 3030, 3040 (s/n 430000-later), 3055, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, Compatible with John Deere Combine(s) 1165, 1175, 4425, 4435, Replaces John Deere OEM nos L29226, T21875, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436093)$20.01
Differential Lock Pedal, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 478686-earlier), 1830, 2030, 2040, 2040S (s/n 478686-earlier), 2240, 2440, 2640, Replaces John Deere OEM nos T27430, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434013)$66.01
Drag Link Assembly - 35.781 Long For 820, 830, 1020, 1520, 1530, 2040, 2240 (To S#349999). (Item #: 102274, Ref: AR68818)$77.00
Front Axle Casting Front Bushing - Measuring 0.810 inches inside diameter, 1.250 inches outside diameter and 3.636 inches long, this bushing is used on 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. Replaces T21669 (Item #: 111973, Ref: T21669)$12.70
Front Axle Casting Rear Bushing - Used on John Deere models: 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. This bearing measures 1.765 inches outside diameter, 1.575 inches inside diameter, and is 1.500 wide. Replaces John Deere OEM numbers L57310, L62836, T23170 (Item #: 113981, Ref: T23170)$9.20
Hub - For tractor models 300, 301, 400, 401, 1020, 1120, 1520, 1530, 2010, 2020, 2030, 2040, 2120, 2240, 2630, 2640, 302, 820, 830, 920, 2440 serial number under 340999. Hub, 6 Bolt. Uses wheel bolt # WB916 9/16-18 x 1.69 inch. (Item #: 104768, Ref: T25809)$50.00
Pivot Pin - Rear - For John Deere tractor models 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 380, 400, 401, 401B, 401C, 401D, 480, 480A, 480B, 480C, Replaces John Deere OEM number R54195, Length: 4.100", Diameter: 1.5727", (Item #: 128476)$46.00
Planetary Drive Shaft - Left Hand, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1630, 1640 (s/n 430000-later), 1830, 2020 (s/n 430000-later), 2030, 2040 (s/n 430000-later), 2150 (s/n 430000-later), 2240 (s/n 350000-later), 2255 (s/n 430000-later), 2350, 2440 (s/n 340999-earlier), Replaces John Deere OEM number L34353, L41167, T28908, T21820, T31086, T71926, Left Hand, Splines: 23, Teeth: 12, For a new version of this item use Item #: 126904, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430032)$89.01
Planetrary Drive Shaft - Right Hand, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 350000-earlier), 2040 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-earlier), 2255, 2350, 2440 (s/n 340999-earlier), Replaces John Deere OEM number L41166, T28907, L34168, T21821, Right Hand, Splines: 23, Teeth: 12, For a new version of this item use Item #: 126897, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430033)$100.01
Power Steering Column Repair Kit - Used on John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 3030, 3120, 3130, 820, (3 cylinder) 830 (3 cylinder), 940, this kit repairs columns on tractors with Power Steering. Replaces John Deere part numbers AT315816, AT26188 (Item #: 109848, Ref: AT315816)$70.00
Power Steering Fill Hole Plug - For 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830. Power Steering Fill Hole Plug, Metal. Replaces OEM part numbers F1676R and 22050X. (Item #: 107801, Ref: R2480)$13.50
Power Steering Overhaul Kit - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, Replaces John Deere OEM number AT315816, (Item #: 115328)$81.98
Power Steering Shaft - This Power Steering Shaft is used on John Deere 820, 830, 1020, 1520, 2020, 1030, 1530, 2030, 2130, 2630, 2040, 2240, 2640, 2150, 2350, 2155, 2355, 300, 400, 310, 401, 302. Replaces L29199 (Item #: 112629, Ref: L29199)$242.98
Power Steering Valve Tie Rod - This Power steering valve tie rod measures 5.625 inches (136.25mm) Center to Center, an Inside Diameter of 0.624 inch (15.86mm) on one side and 0.75 inch (19mm) on the other side. Used on 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, 300 Indust/Const, 301 Indust/Const, 310 Indust/Const, 400 Indust/Const, 401 Indust/Const, 820, 830 It replaces original part number T25324 (Item #: 162164, Ref: T25324)$75.00
Spindle Bushing - Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Item #: 113923, Ref: T21539)$12.10
Spindle Dust Seal - This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2282T (Item #: 115287, Ref: M2282T)$4.70
Spindle LH/RH - Vertical shaft length 11.875 inches, shaft diameter 1.375 inches, spindle inside bearing flat 1.375 inch, spindle outside bearing flat .842 inch. Keyway is to the rear. REPLACES: AR52861. Fits 1020, 1520, 1530, 2020 (swept back), 2030, 2040, 2240, 2440 (< serial number 340999), 2630, 2640 (< serial number 340999), 820, 830. Wheel Bearing Kit available separately part number WBKJD3. Replaces AR103472, AR52861. (Item #: 102210, Ref: AR103472)$154.00
Spindle LH/RH - Measures A = 9.875 inch, B = 1.375 inch C = 1.375 inch, D =.842 inch. REPLACES OEM numbers: AR52862, AR58608. Fits: 1020 and 1520 (swept back), 1530, 1641, 1641F, 2020 (swept back), 2030 (< serial number 187300), 2040, 2240, 820, 830. Wheel Bearing Kit available separately as part number WBKJD3. (Item #: 102212, Ref: AR103473)$136.00
Steering Arm, LH, Used - For John Deere tractor models 820, 830, 840, 920, 930, 1020, 1120, 1140, 1520, 1530, 1630, 1641, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2355, 2355N, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, Replaces John Deere OEM number T21518, Left Hand, With Swept Back Front Axle, For a new version of this item use Item #: 104954, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404954)$75.01
Steering Arm Pin, Center - 1.249" diameter, 5.230" long. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Used with AT52868, AT52867, AT19793, AR93359, AR93358 and AT19794 center steering arms. Please check dimensions before ordering. (Item #: 163531, Ref: 93358S)$51.00
Steering Arm - Right Hand, Used - For John Deere tractor models 820, 830, 840, 920, 930, 1020, 1120, 1140, 1520, 1530, 1630, 1641, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2355, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, Replaces John Deere OEM number T21517, Right Hand, For a new version of this item use Item #: 104955, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404955)$50.01
Steering Arm, Used - For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2355, 2440, 2630, 2640, 3120, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM number T28272, Replaces Casting nos T22525, For a new version of this item use Item #: 163451, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498801)$158.01
Steering Shaft, Used - For John Deere tractor models 820, 830 (1020), 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM nos T36482, L42079, Replaces John Deere Casting nos T21546, Casting No T21546, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498407)$375.01
No Picture
Steering Valve Assembly - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31262, AL31515, AL70699, AT23175, RE10800, Only for use with closed center hydraulic system, Tall Housing - 15-1/2", Comes primered (color may vary). Prior to painting check fitment, For a Remanufactured version of this sku use Item #: 205195, (Item #: 109847)$700.00
Steering Valve Assembly, Remanufactured, AL31515 - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31515, AL31262, AL70699, AT23175, RE10800, Marked L34450, R58041, R77312, R77314, T25295, For a New version of this sku use Item #: 109847, (Item #: 205195)$846.01
Steering Valve Assembly, Remanufactured, AL31515 - For John Deere tractor models 820, 830 (s/n 258365-earlier), 920, 930 (s/n 258365-earlier), 2040 (s/n 266749-earlier), Replaces John Deere OEM number AL31515, AL70699, AT23175, RE10800, All using open center hydraulic system, Marked L34450, R58041, R77312, R77314, T25295, Universal hydraulic oil (2.5 gallon) use Item #: 124173, Additional Handling and Oversize Fees Apply To This Item, (Item #: 205392)$1100.01
Steering Valve Assembly, Used - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31262, RE10800, AL31515, AL70699, AT23175, For a new version of this item use Item #: 205195, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409847)$530.01
Steering Wheel - Steering wheel, 16 1/2 diameter, 7/8" splined hub, 3-1/2 dished, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 and up, 4000, 4020 serial number 201000 and up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Item #: 113508, Ref: T22875)$66.00
Steering Wheel - 18" diameter, 7/8" splined hub, American Made Rubber, shiny bake-o-light. For early JD 2 cyl. tractor models 520 SN# 5208100 and up, 530, 620 SN# 6213100 and up, 630, 720 SN# 7214900 and up, 730, 820 SN# 8203100, 830. All with power steering. (Item #: 101446, Ref: AF3856R-R)$72.00
Steering Wheel - For A, B, D, G, R, 50, 60, 70, 80, 520, 620, 630, 720, 730, (820 Diesel (2 CYL) With Power Steering). Steering Wheel 17 5/8" Diameter, 13/16" Keyed Hub. 2447R (Item #: 101444, Ref: AA380R)$48.00
Steering Wheel - For R, 70, 720, 80, 820 Without Power Steering. Steering Wheel, 20" Diameter, 4 Spokes, 11/16" Keyed Hub. (Item #: 101445, Ref: AR505R)$48.00
Steering Wheel - This steering wheel is for early JD 2 cyl. tractor models 520, 530, 620, 630, 720, 730, 80, 820, 830 with Power Steering. 18" Diameter, 7/8" Splined Hub, Plastic Covered Foreign made. 2 7/16 cap opening. (Item #: 101446, Ref: AF3856R-P)$72.00
Steering Wheel Acorn Nut - Stainless steel. For tractor models 50 SN# 20400 and above, 60 SN# 37000 and above, 70 SN# 13000, and above, 520 SN# 8099 and below, 620 SN# 13099 and below, 720 SN# 14899 and below, 80, 820 SN# 3099 and below. (Item #: 101458, Ref: F1745R)$19.00
Steering Wheel Cap - This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Item #: 101453, Ref: AL155227)$57.00
Steering Wheel Cap - For tractor models 320, 330, (420 with slant steering to SN# 139999), 430, 435, (520 from SN# 5208100 with power steering), (530, 630, 730 with power steering), (830 2-cyl with power steering), (620 from SN# 6213100 with power steering), (720 from SN# 7214900 with power steering), (820 2-cyl from SN# 8203100 with power steering). Replaces AL155227, F3629R (Item #: 101452, Ref: R3859)$72.00
Steering Wheel Cap - For 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, 820, 830 without Power Steering. Replaces OEM3630, F3630R (Item #: 101451, Ref: R4266)$66.00
Steering Wheel Cap, Black Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Item #: 101457, Ref: R26673)$56.00
Steering Wheel Cap, Used - For John Deere tractor models 820, 830, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2250, 2440, 2510, 2520, 2630, 2640, 3010, 3020 (s/n 123000-later), 4000, 4010, 4020 (s/n 210000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 5103, 5105, 5203, 5205, 5220, 5225, 5303, 5320, 5325, 5400, 5420, 5425, 5500, 5520, 5525, 6300, 6403, 6603, 7020, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7815, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8430, 8440, 8450, 8520, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9560, 9620, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6602, 6620, 7700, 7720, 8820, 9400, 9410, 9450, 9500, 9510, 9550, 9560, 9600, 9610, 9640, 9650, 9660, 9680, 9750, 9760, 9860, 9880, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6650, 6710, 6750, 6810, 6910, 6950, 7460, 9935, 9970, 9976, 9986, 9996, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 4700, 4710, 4720, 4920, 6700, Replaces John Deere OEM number AL155227, AL118173, R47998, For a new version of this item use Item #: 101453, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 401453)$33.00
Steering Wheel Cap, White Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Item #: 101456, Ref: JDS338)$67.00
Steering Wheel Plate - Fits John Deere 50 SN# #5020400 and up, 60 SN# #6037000 and up, 70 SN# #7013000 and up, 520 up to SN# #5208099, 620 up to SN# #6213099, 720 up to SN# #7214899, 80 and 820 up to SN# #8203099 (All with Power Steering), Replaces #F1744R (Item #: 101459, Ref: F1744R)$10.00
Steering Wheel Shaft Bushing - For John Deere tractor models B (s/n 201000-later), BN (s/n 201000-later), BNH (s/n 201000-later), BW (s/n 201000-later), BWH (s/n 201000-later), R, 50, 80, 520, 620, 820, 830, Replaces John Deere OEM number B37R, 1.739" Length, 0.940" Outer Diameter, 0.887" Inner Diameter, (Item #: 126725)$18.80
Tie Rod, Inner - Inner Tie Rod. 1-1/8" inner diameter, 5-3/4" to center of post. For JD JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1641F, 1840, 2020, 2120, 2150, 2240, 2255, 2440, 2630, 2640, 301A, 302, 401B, 820, 830, 840, 920, 930, 940 tractors (Item #: 102248, Ref: AT27130)$28.80
Tie Rod Outer - Tie rod tube, 12.25 long, .781 wide, 11 notches for outer drilled tie rod end. For adjustable front axles except 88 wide or power drive. Tractors: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 low profile, 4320. For 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Replaces AT23885 (Item #: 102249, Ref: AT23885)$27.80
No Picture
Tie Rod Outer - Tie rod tube, 12.25 long, .781 wide, 11 notches for outer drilled tie rod end. For adjustable front axles except 88 wide or power drive. Tractors: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 low profile, 4320. For 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830 (Item #: 102249, Ref: TP-AT23885)$27.80
Tie Rod Right Hand - Tie rod end, outer, threaded, right handed threads, 3-3/8 to center of post. For adjustable front axles 48 to 80 on tractors 520, 530, 620, 630, 720, 730. Fixed standard axles on tractors, 620, 630, 720, 730~ 820 and 830 except Mannheim. Also used on d For 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 102242, Ref: TP-AR21944)$19.70
Tie Rod Tube - This Tie Rod Tube measures: 7.920 inches long, 0.812 inches inside diameter, 1.125 inch - 12 thread outside diameter. It is used on 1020, 1030, 1040, 1120, 1140, 1530, 1630, 1641F, 1750, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2355N, 2630, 820 (3 Cyl), 830 (3 Cyl), 920. Replaces T29106 (Item #: 104824, Ref: T29106)$24.00
Wheels
12" x 28", 6 Loop Rim, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1130, 1530, 2020, 2040, 2150, 2155, 2240, Replaces John Deere OEM nos AL15369, 12x28, Loops: 6, 3 1/2" wide, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432861)$350.01
No Picture
15" x 24" 6 Loop Rear Rim - For John Deere tractor models 820 (3 cyl), 830 (3 cyl), 920, 1020, 1250, 1450, 1530, 1650, 1850N, 1950N, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2440, 2630, 2640, 4700, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5320N, 5400, 5400N, 5410, 5420, 5420N, 5500N, 5510N, 5520, 5520N, Compatible with John Deere Construction and industrial models 301, 301A, 302, 401, 401B, 401D, Replaces John Deere OEM number AT20521, Width: 15", Diameter: 24", Type: 6 Loop, Can use Rim Bolt Kit 154252, Rim Color: Silver Mist, For 16.9" X 24" Or 17.5" X 24" Tires, (Item #: 110425)$242.00
Front Wheel Bearing Kit - Front Wheel Bearing Kit. Kit contains one each: LM48510 (Cup), LM48548 (Cone), M12610 (Cup), M12649 (Cone), AT10344 (Seal). For tractor models 820 Mannheim prior to serial number 042924~ 830 Mannheim with T25809 hub~ 1020 and 1520 except Heavy Duty axle on Hi-Crop and Row Crop~ 2010 except low profile Row Crop, 2020~ 2030 except Heavy Duty axle, 2040 with T2580 For 1020, 1520, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830. Repairs one wheel. (Item #: 102228, Ref: FW155S)$27.00
No Picture
Front Wheel Bearing Kit - Wheel bearing kit. Contains one each: LM48510 (Cup), LM48548 (Cone), M12610 (Cup), M12649 (Cone), AR49592 (Seal). For tractor models 820 Mannheim serial number 042925 and up, 830 Mannheim with R47076 hub, 2040, 2240. For 2040, 2240, 820, 830. Repairs one wheel. (Item #: 102228, Ref: FW160S)$27.00
Front Wheel Hub Cap, Used - For John Deere tractor models A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 940, 950, 970, 990, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1550, 1630, 1640, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2650, 2750, 2755, 2840, 2850, 2950, 2955, 3010, 3020, 3030, 3040, 3120, 3130 (after s/n 186270), 3140, 4000 (after s/n 201000), 4010, 4020 (after s/n 201000), 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010, 5020, 6030, 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6410L, 6410S, 6420, 6500, 6510, 6520, Replaces John Deere OEM number A1555R, 3 bolt cap, Aluminum Cap, For a new version of this item use Item #: 102235, (Item #: 402235)$5.01
No Picture
Front Wheel Hub Cap, Used - For John Deere tractor models 820 (s/n 042925-later), 830 (non-utility), 920 (s/n 042925-later), 940, 1020 (s/n 042925-later), 1030 (with standard front axle), 1040, 1120 (s/n 042925-later), 1130 (with standard front axle), 1140, 1630 (with standard front axle), 1640 (low type), 2020 (s/n 042925-later), 2040 (s/n 350000-later), 2120 (s/n 042925-later), 2150 (Non-General Purpose), 2155, 2240, 2255, 2350 (low type), 2355 (with standard front axle), 2355N, 2550 (low type), 2555 (with standard front axle), 2755 (with standard front axle), 2855N (with standard front axle), Replaces John Deere OEM number T12688, 6 bolt hub cap, Press in style, For a new version of this item use Item #: 100685, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435275)$2.91
Hub Cap - This is a press in hub cap. It is used With R47076, T25809 and T21543 Front Wheel Hubs. Fits John Deere Models 820 (After Serial Number 042925), 830 (Non-Utility), 920 (After Serial Number 042925), 940, 1020 (After Serial Number 042925), 1030 (w/Standard Front Axle), 1040, 1120 (After Serial Number 042925), 1130 (w/Standard Front Axle), 1140, 1630 (w/Standard Front Axle), 1640 (Low Type), 2020 (After Serial Number 042925), 2040 (After Serial Number 350000), 2120 (After Serial Number 042925), 2150 (Non-General Purpose), 2155, 2255, 2355N, 2240, 2350 (Low Type), 2355 (w/Standard Front Axle), 2550 (Low Type), 2555 (w/Standard Front Axle), 2755 (w/Standard Front Axle), 2855N (w/Standard Front Axle) Replaces N52048 (Item #: 100685, Ref: T12688)$6.90
Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 19H1863. (Item #: 184824, Ref: 350719KIT)$22.00
Rim Clamp, Used - For John Deere tractor models A (s/n 477000-later), AO (s/n 014800-later), AR (s/n 014800-later), B, BN, BNH, BW, BWH, G, GH, GN, GW, R, 60, 70 (s/n 014800-later), 80, 600, 620, 630, 720, 730, 820, 830, 2010, 3010, 3020, 3030, 3120, 3130, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 55 (s/n 12051-39349), 105, 6602, 6622, Replaces John Deere OEM nos B634R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497223)$6.01
Steering Arm and Drag Link Bushing - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1640, 1830, 1840, 2020, 2030, 2040, 2140, 2150, 2155, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 3030, 3040, 3120, 3130, 3140, Compatible with John Deere Combine (s) 2240, Replaces John Deere OEM number T21445, (Item #: 121436)$8.80
Wheel Bearing Kit - For 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1750, 1850, 1950, 2020, 2040, 2120, 2150, 2155, 2240, 2250, 820, 830, 940, 2350 Lowprofile, (2344, 2555, 2755 all mid-hi axle), 2255 swept back. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n LM48548 (Cone), LM48510 (Cup), M12649 (Cone), M12610 (Cup), 23342 (Seal has 2.361 I.D.). (Item #: 102227, Ref: WBKJD2)$20.60
Wheel Bearing Kit - For 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830, (2440 SN# up to 340999). Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n LM48548 (Cone), LM48510 (Cup), M12649 (Cone), M12610 (Cup), AT10344 (Seal has 1/075 I.D.). (Item #: 102228, Ref: WBKJD3)$27.00
Wheel Hub, Used - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 1950, 2020, 2040, 2120, 2150, 2155, 2240, 2250, 2255, 2350 (low profile), 2355 (mid-high axle), 2355N, 2550, 2555 (mid-high axle), 2755 (mid-hi axle), Replaces John Deere OEM number R47076, 6 bolt hub, For a new version of this item use Item #: 102233, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402233)$45.01
Universal Parts and Accessories Category: Accessories / Supplies
Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127)$365.01
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153)$100.55
Decals and Emblems
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697)$7.70
2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696)$7.70
No Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186)$22.80
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187)$14.80
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185)$41.00
Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y)$24.40
Electrical System
NOTE
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.
NOTE
No Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE)$84.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209)$13.40
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302)$25.20
No Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010)$55.00
Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501)$57.00
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6)$24.70
No Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85)$5.50
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425)$4.50
NOTE
Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6)$15.80
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12)$15.80
Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR)$10.60
Engine Parts
NOTE
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE
Engine Rings
NOTE
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE
Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C)$76.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C)$103.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C)$123.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR)$106.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR)$167.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C)$147.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C)$170.00
Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR)$89.00
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114)$3.30
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134)$4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138)$2.80
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214)$4.58
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234)$8.71
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300)$7.30
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312)$8.90
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400)$8.70
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500)$14.30
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799)$10.30
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800)$9.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802)$11.60
Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804)$11.40
Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807)$11.00
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14)$14.30
Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15)$18.38
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A)$6.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A)$7.50
Fuel System / Air Intake
Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553)$5.50
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949)$9.92
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R)$3.90
Gauges
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771)$58.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672)$41.00
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095)$14.90
Hitch / Drawbar
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X)$11.50
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2)$37.00
Hydraulic System
Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021)$15.20
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12)$11.00
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180)$55.50
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24)$13.50
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30)$16.10
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48)$16.50
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000)$16.10
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60)$16.10
Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317)$15.50
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269)$183.00
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269)$183.00
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215)$120.00
Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH)$39.00
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311)$51.00
Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH)$53.00
No Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP)$21.50
Miscellaneous
Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236)$382.00
Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B)$245.00
Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195)$122.00
Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250)$24.00
No Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_)$8.50
No Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP)$8.50
No Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL)$69.00
No Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT)$29.50
No Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL)$56.00
No Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT)$23.60
No Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP)$8.50
No Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT)$22.50
No Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP)$8.70
No Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL)$76.00
No Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT)$29.50
No Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP)$10.30
No Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL)$110.00
No Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT)$42.00
No Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP)$10.50
No Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL)$60.00
No Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT)$23.30
No Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP)$8.00
No Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL)$60.00
No Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT)$23.50
No Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT)$17.00
No Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP)$7.90
No Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL)$84.67
No Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL)$68.39
No Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT)$99.22
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$45.00
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$45.00
PTO / Driveline
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY)$176.91
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33)$339.00
PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164)$258.00
Seats
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V)$1518.86
Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056)$2161.57
Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602)$52.00
Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014)$46.00
Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016)$53.00
Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP)$100.00
Sheet Metal / Body Parts
Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140)$41.19
Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759)$9.00
Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K)$178.00
Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003)$410.00
Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A)$13.30
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417)$49.00
Tools
No Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891)$24.30
Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166)$100.00
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166)$70.00
Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB)$17.15
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$45.00
Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16)$109.00
Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050)$17.90
No Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059)$56.00
No Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058)$63.00
No Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061)$116.00
No Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062)$67.00
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
