FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 532 Tractor Parts

[Categories] [All Ford Models] [Print]

Brakes

Brake Actuator Assembly, 8 - For tractor models 2810, 2910, 335, 340, 340A, 340B, 3900, 3910, 4000, 4100, 4110, 420, 4400, 445, 445A, 450, 4600, 4610, 515, 532, 540, 540A, 540B, 545, 545A. (Item #: 128275, Ref: D5NN2N317A) $98.00

Brake Disc - Used in late production, this disc has a 1-9/32 wide facing. This disc is 8.070 inches outside diameter, 2.086 inches inside diameter with 22 splines. Replaces Ford part numbers 86529646, E9NN2N097AA, 83983209, E9NN2A097AA (Item #: 105497, Ref: E9NN2A097AA) $30.60

Brake Disc - For tractor models: 3900, 4100, 4600. Industrials: 420, 515, 532, 535, 340, 445, 540, 545, 550, 555, 650, 750, 5500, 5550, 6500, 7500. All 1975-1980. Also for 3910, 4110, 4610. Industrial 555. All 1981 and up. Friction Brake Disc for Wet Brakes. 8 inch diameter, 22 Spline. (Item #: 105496, Ref: C5NN2A097B) $25.20

Brake Disc, 9 Inch - With 1-9/32 inch wide lining, this disc was used in later production than the 5/8 width lining. This disc is 8 7/8 inches outside diameter, 2 1/8 inches inside diameter, facing width 1.31 inches, 22 internal tooth count. Used with 9 inch actuators. This part replaces Ford part numbers E9NN2A097BA, E9NN2N097BA, 83989830, 81818854, 83956599, E6NN2A097AA, 87518036, C7NN2A097B. (Item #: 105499, Ref: E9NN2A097BA) $26.10

Brake Disc, Intermediate Steel - Used with 9 inch actuators, this intermediate steel disc measures 8.976 outside diameter and 5 inch inside diameter. This part replaces Ford OEM numbers E6NN2N315AA, E6NN2N615AA, 83956598. Used on the following with 9 inch actuator disc brakes: 3600, 4600, 5000, 5100, 5110, 5200, 532, 5340, 5500, 5550, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 650, 6500, 660, 6600, 661, 6610, 6610S, 6640, 6700, 6710, 681, 6810, 7000, 7010, 7100, 7200, 7410, 755, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8030, 8210, 8240, 8340, TS100, TS110, TS120A, TS6000 Brazilian, TS6020 Brazilian, TS6030 Brazilian, TS6040 Brazilian, TS80, TS90 (Item #: 105513, Ref: E6NN2N315AA) $14.50

Brake Pedal Shaft - 18.46 inches in length. For tractor models 2000-1972 and later, 2100, 2110, 2120, 2150, 2300, 231, 2310, 233, 2600, 3000-1972 and later, 3100, 3120, 3150, 3190, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 340B, 3500, 3600, 3900, 4000-1972 and later, 4100, 4110, 420, 445, 445A, 4600, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A. Brake pedal return spring E1NN2472BA and bushing C5NN2N477A are available separately. (Item #: 165726, Ref: D9NN2N337FA) $134.00

Brake Rod Seal - For tractor models 345C, 345D, 3550, 420, 445, 445A, 445C, 445D, 455, 455C, 455D, 4400, 4500, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 6500, 655, 655A, 655C, 655D, 675D, 750, 7500, 755, 755A, 755B. Replaces E7NN2N336A, 85999093. (Item #: 105644, Ref: C5NN2N336A) $3.50

Brake Shaft Felt Seal - This Brake Shaft Felt Seal measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.20

Brake Shaft Seal - This Brake Shaft Seal measures 1.565 inch outside diameter, 1-1/16 inch inside diameter. It replaces original part numbers C5NN2473F, C5NN2473H, C5NN2N258C, D2NN2N258A, D8NN2N289AA, D9NN2N289AA, 65968, 83924047. (Item #: 150914, Ref: D9NN2N289AA) $3.30

Intermediate Steel Disc - Intermediate Steel Disc, 8 inch diameter. For 340, 3550, 3900, 3910, 4000, 4100, 4110, 420, 4200, 445, 4500, 4600, 4610, 515, 532, 535, 540, 545, 550, 5500, 555, 5550, 650, 6500, 750, 7500. (Item #: 105650, Ref: C5NN2N315B) $6.30

Spring - Spring. Rear Wheel Brake Disc Return. Tractors: 3550, 4000 (except 4110), 5000, 7000 (1965-1975), 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 420, 515, 532, 535 (1975-1981), 2810, 2910, 3910, 4110, 4610, 5610, 5900, 6610, 6710, 7610, 7710, 7810, 7910, 8210 (1981-10/1991), 3230, 3430, 3930, 4130, 4630 (3/1990 and up), 5640, 6640, 7740, 7840, 8330 (with Mechanical Brakes) (11/1991 and up), 5610S, 6610S, 7610S, 7810S (1/1994 and up). (Item #: 124547, Ref: C5NN2N320A) $1.70

Clutch

Clutch Cover Assembly - 13 inch, 4 Lever, Halo Ring and 1-7/8 inch, 29 spline IPTO Hub. Tractors: 2810, 2910 (5/1983-2/1990), 3230, 3430, 3630, 3910 (5/1983-2/1990), 4110, 4130, 4330, 4340, 4400, 4410, 4500 (1/1965-1975), 4600, 4610, 4630, 4830, 5030. Industrials: 250C, 260C, 340, 340A, 340B, 345C, 345D, 420, 445A, 445C, 515, 532, 535, 540, 540A, 540B, 545, 545A Replaces E0NN7563BA, 82006027. (Item #: 172435, Ref: C5NN7563AC) $249.00

Pilot Bearing - For tractor models 4110, 4120, 4121, 4130, 4131, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 4500, 455, 4600, 4600O, 4600SU, 4610, 4610O, 4610SU, 4630, 4830, 4830N, 501, 515, 530A, 531, 532, 535, 540, 540B, 541, 545, 545A, 550, 555, 555A, 620, 621, 630, 640, 641, 650, 651, 655, 655A, 6710, 740, 741, 820, 821, 840, 841, 850, 851, 941, 950, 951. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate Assembly, 13 Inch - This is a 13 inch pressed steel Pressure Plate Assembly, with release plate. It has a 57mm Release Lever Height. If you need 63mm Release Lever Height, also order F1815816 Shim Kit. Used on 335, 340, 3400, 340A, 340B, 3550, 420, 440, 4400, 445, 445A, 4500, 515, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 4330, 4340. Replaces C5NN7563AD, C5NN7N513A, E0NN7563AA, E0NN756AA, 83925714 (Item #: 158989, Ref: C5NN7563AD) $224.00

Pressure Plate Shim Kit - This Shim Kit contains (4) 0.090 inch thick shims. It is used with 13 inch pressure plates C5NN7563AD and C5NN7563AC when needed. Replaces C5NN7N596B. (Item #: 183914, Ref: F1815816) $23.50

Spring - Spring for Clutch and Brake Lever Assist. Tractors: 3550, 4000 (11/1972 and up), 5100, 7100 (1965 and up), 420, 515, 532, 535, 4600, 5600, 5700, 6600, 6700, 7600, 7700, (1975 to 1981). (Item #: 164364, Ref: C5NN2472H) $4.60

Cooling System

Fan Belt - Fits 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7000, 7600, 7700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 230A, 231, 334, 335, 420, 515, 530A, 531, 532, 535, 545D 650, 750, 755, 755A, 755B. Some of these tractors used more than one type of belt. Verify part number before ordering. 1/2 Inch (13 mm) x 55 7/16 Inches (1408 mm) raw edge v-belt. (Item #: 118363, Ref: D4NN10C318A) $11.20

Fan Shroud - Shroud, Radiator Fan. Ford Tractor (s) 2000, 2100, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3610, 3900, 3910, 4000, 4100, 4110, 4200, 4400, 4410, 4600, 4610. Compatible with Ford Construction and Industrial (s) 230A, 231, 233, 234, 333, 334, 335, 445, 515, 530, 530A, 531, 532, 545, 555, 4140. Fiberglass type. Must drill holes. Not like original. Replaces 83910061, 87770026, C5NN8146H, C5NN8146J, D4NN8146A, D6NN8146C, D6NN8146H (Item #: 116905, Ref: D6NN8146H) $78.00

Radiator Hose, Upper - This Upper Hose is for Gas engines. Hose inside diameter 1.5 inch. Fits radiator upper. For 2000, 2310, 2600, 2610, 2810, 2910, 3000, 335, 3600, 3610, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 532, 535, 5600, 5700, 6700, 7600, 7700. (Item #: 113921, Ref: C5NN8260D) $8.80

Radiator with Oil Cooler - For the following tractors with oil cooler, 3 cylinder GAS 158 CID or 158 CID Diesel: 2000, 3000, 4000, 4100, 4400 (1965 to 1975); 420, 532 with torque converter (1975 to 1981). Core is 18 inches tall and 16 inches wide. Oil cooler fittings on front side. Oil cooler can be plugged and not used if desired. For Radiator Cap order part number E2NN8100BA. Replaces original part numbers D8NN8005PA, E0NN8005MD15M, E0NN8005MA15M, E0NN8005KA15M, E0NN8005LA15M, E0NN8005MB15M. (Item #: 101694, Ref: D8NN8005PA) $270.00

Water Outlet Housing - Housing, Water Outlet Connection. For 2000, 231, 233, 2600, 3000, 333, 335, 3600, 3900, 4000, 4100, 420, 4600, 5000, 515, 531, 532, 535, 5600, 5700, 6600, 6700, 7000, 7600, 7700. (Item #: 127343, Ref: C7NN8594B) $12.10

Drive Train

Axle Shaft Seal - Seal and Retainer Assembly, Outer, for Rear Axle Shaft. For tractor models 3250C, 260C, 2810, 2910, 3055, 335, 340, 340A, 340B, 345C, 345D, 3550, 3900, 3910, 4000, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4610, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 555C, 555D, 575D, 655C, 655D, 675D. Replaces 83999828, C5NN4969B, C5NN4969D, 81819097, 81809097, 81875227, 81859537, F2NN4969AA, E0NN4969AA (Item #: 163590, Ref: C5NN4969D) $18.60

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $19.30

Bearing, Main Input Shaft - Measures 40mm inside diameter, 90mm outside diameter, 23mm wide. Replaces 20943310, 63082RS, 6308, 86511837, 81805130, 81808853, C5NN7A452A, N115069A, 391068X1 (Item #: 183460, Ref: C5NN7A452A) $19.00

Center Housing Gasket - Used on the following, all built 1965 or later: 2000, 2110LCG, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 333, 335, 340, 3400, 340A, 340B, 3500, 3600, 3610, 3900, 4000, 4100, 4110, 4110LCG, 445, 450, 4600, 4610, 515, 530A, 531, 532, 535, 540, 540A, 545, 550, 555, 555A, 555B, 655, 655A. Replaces D4NN4N507A, C5NN4N507A, 86569738 (Item #: 179412, Ref: D4NN4N507A) $14.40

Countershaft Gear - Replacing Ford / New Holland part numbers 81804753, C5NN7113B, 81869991, this Transmission Countershaft Gear has 16 and 35 teeth. It is used on Ford models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 260C, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5100, 515, 5200, 530, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 7000, 7100, 7200 (Item #: 172893, Ref: C5NN7113B) $383.00

Coupling, Counter Shaft Sliding Gear - 21 teeth, 16 spline. For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5610S, 5640, 5700, 5900, 655, 655A, 6600, 6610, 6610S, 6640, 6700, 6710, 7010, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810S, 7840, 8010, 8240, TS100, TS90 all with 8 speed transmission. Replaces C5NN7106B, C7NN7106E, C5NN7102F, D2NN7106B, C5NN7106D, 81819184, 81826589, 81823632, 81813478, E0NN7106BA, 83934545 (Item #: 170135, Ref: E0NN7106BA) $65.00

Deep Groove Ball Bearing Single Row - This bearing measures 50mm inside diameter, 90mm outside diameter, 20mm wide. It is used as PTO Input Shaft Bearing with live PTO. It also has other applications. Confirm by OEM part numbers. Replaces: 6210, 26794660, C5NN7N166B, C0NN7C246B, N115069B, 81854759, 83908455, 84330059, 255090201, 8101-06210, 391162X1, 24101-62104, 971041, 979537, 971129 (Item #: 177372, Ref: C5NN7N166B) $24.50

Differential Bearing and Cup - This Differential Bearing and Cup is used on Ford 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA and other. Replaces original part numbers B4222, BB4222, BB4221B, 510884, 510892, 81709463, 83402421. (Item #: 179801, Ref: 195159M1) $29.60

Differential Lock Coupler - Used in Ford equipment with differential lock, 1965 and later, this part replaces Ford / New Holland part numbers: C5NN4N064A, 81812261, 81871527. This part is used on the following models: 250C, 260C, 2810, 2910, 3000, 3055, 3230, 335, 340, 340A, 340B, 3430, 345C, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 420, 4200, 4330, 4340, 4400, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 515, 5190, 5200, 532, 5340, 535, 540, 545, 550, 5500, 555, 5550, 555A, 555B, 555C, 555D, 555E, 5600, 5610, 5610S, 575D, 575E, 5900, 650, 6500, 655, 655A, 655C, 655D, 655E, 6600, 6610, 6610S, 6700, 6710, 6810, 7000, 750, 7500, 755, 755A, 755B, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210, TS100, TS90 (Item #: 180499, Ref: C5NN4N064A) $105.00

Gear, 2nd and 6th - Gear has 28 and 43 teeth. It is used is some 8 speed transmissions of Ford Tractors. Replaces OEM numbers C5NN7N101B, D2NN7N101A, 81813520, E2NN7N101AA, 81826588, C5NN7N101D, E6NN7N101BA, 82987561, 83959996, 83945994 (Item #: 179205, Ref: E6NN7N101B) $128.61

Gear, 3rd and 7th - This gear has 35 teeth. It is used on 8 Speed, Non Synchro transmissions. Replaces OEM numbers 7706988, 07706988, 83900392, 81805076, 83960029, 83960392, 83990392, C5NN7N339D, E9NN7N315AA (Item #: 179369, Ref: E9NN7N315AA) $102.00

Gear Shift Boot - This Gear Shift Boot can be used on multiple Ford/New Holland Tractors built 1965 and later. The top holes is 5/8 inch and the bottom hole is 2 1/2 inches. It replaces original part numbers C5NN27534, C5NN275394, C5NN7277D, D4NN7N309A, 82007346. (Item #: 164365, Ref: C5NN27534) $3.70

Gear Shift Knob - This Gear Shift Knob fits 5/16 inch x 24 thread and approx. 1.299 inch diameter. It replaces original part numbers E440GB9, 81800669 (Item #: 121228, Ref: E440GB9) $2.90

Gear Shift Lever, with Knob, 4-Speed Transmission - This gear shift lever with knob replaces NAA7209A and 8N7209C shift levers. This newer version has 5/16 inch UNF thread for the shift knob (knob included). The early series 3/8 inch knob thread shaft is no longer available. Note: use gear shift knob C5NN7213A (included) if you need a replacement. This gear shift lever fits tractor with single lever 4 speed or torque converter transmission: 2000, 2110LCG, 3000, 340, 3400, 340A, 3500, 3550, 4000, 420, 445, 4500, 532, 535, 540, 540A, 545, 5500, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Jubilee, NAA (Item #: 110007, Ref: C5NN7202B) $94.32

Inner Axle Bearing - This Bearing measures 66.7mm (2.626 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces 3955/394A, C9NN4874A, 1-31-741-001, 106639, 8181397, 163044, 81818397, 81826019181, 82958861, C5NN4874B, C5NN4N221B, 86503131, 81818406, 82007077, 1079649M1, 884791M92, 831488M1, 834049M1, 1079403M1, 1851392M91, 1851392M1. Verify OEM number or measurements before ordered. Many model tractors have more than one rear axle configuration. (Item #: 185648, Ref: C9NN4874A) $36.80

Mainshaft Front Bearing - Measuring 30mm inside diameter, 72mm outside diameter, and 20.75mm wide, this bearing replaces OEM numbers D0NNN755B, 46805, 26800340. It is used on Ford models 2000, 2100, 2110, 2600, 2600N, 2600V, 2810, 2910, 3000, 3100, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3900, 3910, 3910N, 3910V, 4000, 4100, 4110, 4110N, 4110V, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 5000, 5100, 515, 5200, 532, 5340, 535, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700 (Item #: 182968, Ref: D0NNN755B) $25.70

Oil Filler Plug - For transmission and rear end. For tractor models 2000 3 cylinder, 231, 233, 234, 2600V, 333, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 2100, 2110, 2120, 2150, 2300, 2600, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3900, 4000 3 cylinder, 4100, 4110, 4140, 4190, 4200, 4300, 4340, 4400, 4410, 4500, 4600, Dexta, Power Major, Super Dexta, Super Major. Please verify the thread size before ordering. This plug measures 1-5/8 inch x 12 thread. Does not come with gasket. Use NAA9160A for gasket. (Item #: 113703, Ref: 957E7010) $15.10

Output Shaft Bearing - Measures 41.3mm inside diameter, 73.4mm outside diameter and 19.8mm wide. Replaces: LM501349/501310, 663558R1, 81277C1, 81278C1, GHB142, 663557R91, 86512015, 5132342, 4999261, WAA4221A, 860270, 860297, WAA4222A, WAA4220A, 05132342, 67370, 67371, 644321, 81803417, 860299, 860301, 860302, 860304, 81803412, 860295, 86512015, 5132342, 83992412, 81854761, 81854361, JD8237, JD8902, 663556R91, 663558R1, 86512015, 663557R91, 109706396, GHB142, MBU1044, 113571M1 (Item #: 150013, Ref: 86512015) $14.60

Output Shaft Gear - Gear has 28 and 49 Teeth. It is used an many Ford / New Holland Models with 8 speed and 6x4 Manual Reversing Transmissions. Replaces OEM part numbers C5NN7145A, 83960022, E6NN7145BA, 81804812, E6NN7145AA (Item #: 165990, Ref: E6NN7145AA) $358.00

Output Shaft Pilot Bearing - Measures 25mm inside diameter, 52mm outside diameter, 16.25mm wide. It replaces: E76GA9, C5NN7N014A, 86705858, C5NN7N047A, C5NN7N044A, 83990517, 81804636, 81804637, C5NN7N048A, F718701030030, 339482X1, 3010151X91, 194145-11910, 971326, 30205, 30205M-TIM, 30205M (Item #: 185088, Ref: C5NN7N014A) $16.20

PTO Input Bearing Retainer Seal - The Seal Measures Oil seal, 1.878 inches inside diameter, 3.130 inches outside diameter, 0.5000 inches wide. It replaces OEM numbers E59GE9, 83924923, D9NNC729BA, 87712923 (Item #: 172919, Ref: D9NNC729BA) $7.50

Rear Axle to Center Housing O-Ring - This Rear Axle to Center Housing O-Ring is used on multiple Ford / New Holland Models. It is number 1 in the image. This O-Ring should always be replaced when changing brake disc on oil immersed systems. 13.50 inch inside diameter x .139 inches thick. Replaces 379313S91, 83417133, VPJ7202, 47P3852 (Item #: 113943, Ref: 379313S91) $6.40

Shift Cover Gasket - This Transmission Shift Cover Gasket is used on multiple Ford Tractors, 1965 an later with 6, 7 or 8 speed transmissions. It replaces original part numbers 82004680, 83959206, C5NN7N225C, D5NN7223B, D8NN7223AA, E6NN7223AA, E8NN7223AA. (Item #: 125339, Ref: C5NN7N225A) $4.40

Spider Cross, Differential - For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Dexta, Super Dexta. Replaces C5NN4211B, E1NN4211AA, E1NN4211AB, 81876885, 83929928 (Item #: 113611, Ref: E1NN4211AA) $57.00

Transmission Oil Cooler - For tractor models (231, 233, 333, 335, 531, 532, 2600, 3600, 4600 less cab), (7000 6/1973 and up). (Item #: 179485, Ref: D3NNH860A) $369.00

Transmission Oil Cooler - For tractor models (233, 333, 335, 532, 2600, 3600 all with cab), 230A, 234, 334, 530A, 2310, 2610, 2810, 2910, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5600, 6600, 7600. (Item #: 119276, Ref: D4NNH860A) $226.00

Transmission Oil Dipstick - Also replaces E1NN7A020BA, D3NN7A020B and 81842758. For models: 340A, 340B, 345C, 345D, 515, 535, 540, 545, 230A, 231, 2310, 233, 234, 250C, 260C, 2600, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 3430, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 445A, 4600, 4610, 4630, 4830, 5030, 530A, 531, 532. (Item #: 128144, Ref: 83929967) $8.20

Transmission Oil Pump - For tractor models 550, 555, 555A, 555B, 655, 655A, (340, 340A, 340B, 445, 445A, 450, 540, 540A, 540B, 545, 545A ALL WITH POWER REVERSE TRANSMISSION), (3000 series, 3500, 3550, 4000 series, 4410, 4500 ALL 1/1/1965 and Newer), (420, 532, 535 ALL 1/1/1975 and newer), 455 (7/1987 to 11/1988), with power reverse transmission. Replaces 530718M92, C5NN7A103F, D2NN7A103A, E4NN7A103AA, 86516596. (Item #: 170901, Ref: 86516596) $294.00

Transmission Output Shaft Seal - Measures 39.4mm inside diameter x 60.3mm outside diameter x 12.7mm wide. It replaces C5NN77086A, 81808572, D66412, D40772, 363514R93, 70800166, ATY3988, ATY4067, AM848T, AP19243H, ATY4124, 1860325M1, 195506M1, 1077452M1 (Item #: 155727, Ref: C5NN77086A) $5.90

Transmission Pump Seal - This O-Ring is used for mounting Transmission Pump. Replaces 1754392M1, 1754392V1, 1754392M1, 81816228, 1P77836A (Item #: 179708, Ref: 81816228) $6.30

Transmission Rear Coupling - This a a paired set used on many Ford New Holland Models. Replaces OEM part numbers 83908698, 82983825, 83960027, E6NN7N072BA, D6NN7N072B (Item #: 167824, Ref: E6NN7N072BA) $91.00

Electrical System

Alternator - 12 volt, 51 amp. Will replace 31 and 37 amp alternators. For tractor models 230A, 231, 233, 234, 2600N, 2600R, 2600V, 333, 334, (335 from 1975-1978 and 1983-1984), 340, 340A, 340B, 3600N, 3600NO, 3600R, 3600V, 3610NO, 3900, 3910H, 3910N, 3910R, 4110N, 420, 445, 445A, 4600NO, 4600O, 4600SU, 4610O, 4610SU, 515, 530A, 531, 532, 535, 550, 6410, 6600C, 6600O, 6610O, 4600C, 7610O, 7700, 7710, 8000, 8600, 8700, 9000, 9600, 9700, A62, A64, A66, TW10, TW20, TW30. Replaces 89NY10300AA, D5NN10300A, D5NN10300BA, D5NN10300D, D5NN10300E, D5NN10300ER, 8AL2049K, 8AL2056K, D5NN10300D (Item #: 111069, Ref: D5NN10300E) $160.00

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 22-226, 578489, 7020480, C7NN14411A, H340505, P41894 (Item #: 112273, Ref: 376852R91) $11.10

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10/1985. For TW5-TW35 to 5/1983-2/1990. 8530-8830 3/1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Item #: 116913, Ref: E7NN11N501AB) $9.30

Ignition Switch, Keyed - This three position Ignition Switch has 5 terminals. Gas or diesel without cold start.It is widely used on Ford / New Holland Tractors 1965 and later. Comes with 2 keys. Replaces C5NN11N572A, D3NN11N572A, 81806736, 81838693, 82849165. (Item #: 185146, Ref: D3NN11N572A) $17.20

Starter, Diesel, Gear Reduction - Gear Reduction Starters offer higher torque than a direct drive starter. This can be useful for diesel engines. This is a gear reduction replacement for our part SLU0002. Replaces 81833782, 81859494, C7NN11000C, D4NN11000A, D0NN11000A, D2NN11000A, 81859398, 81826488, D7NN11000A, D6NN11000A, D8NN11000CD, D8NN11000CB, D8NN11000CA, E2NN11000AA, D2NN11000B, D5NN11001A, D4NN11000B, D7NN11000B, D8NN11000DA29Z, D8NN11000CE, E3NN11000AA, D9NN11000AA, K262761, K308650, LRS212, 26395, 26211, 26339A (Item #: 181969, Ref: 80855520) $175.00

Starter Drive - Starter Drive for original Ford and Tisco 5 inch diameter starter D8NN11000CE. For tractor models 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 540, 545, 550, 555, 5600, 5610, 5700, 5900, 655, 6600, 6610, 6700, 6710. (Item #: 119934, Ref: E4NN11350AA) $29.20

Starter Drive - Replaces; D2NN11350A, 2701E11005A on 4 1/2 inch starter. For tractor models 2000, 2110, 2300, 230A, 234, 2610, 2810, 2910, 3000, 3310, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610, 5000, 5200, 531, 532, 5340, 5610, 5700, 5900, 6600, 6610, 6710, 7600, 7610, 7710, 7810, 7910, 800 Series, 900 Series, A62, A64, A66, 2100, 2120, 3100, 3110, 3120, 334, 335, 3400, 420, 4200, 4330, 4340, 4400, 5100, 550, 4140, 2310N, 3300, 333, 535, 5600, 6700, 7100, 7700, 2150, 3055, 3150, 3330, 4410, 530A, 7200, 4410SU, 5110, 6410, 6810, 7410, 8400, 8600, 8700, 9200, 256, 8210, 8530, 8630, 8730, 8830, 9600, 9700. (Item #: 182914, Ref: C5NF11005C) $11.60

Starter Safety Switch - Safety Starter Switch. For 2000, 2100, 3000, 3100, 3400, 3500, 3550, 4000, 420, 445, 4500, 5000, 532, 535, 545. Replaces C7NN7A247B, 81825189, 314120, 237296, 81812983, C5NN7A247B (Item #: 121160, Ref: C7NN7A247B) $11.90

Starter Safety Switch - For tractor models 2000, 3000, 4000, 5000, 7000 all with 8 speed, dual range, 10-1966 and up. For 2100, 3100, 3400, 3500, 3550, 4400, 4500, 10-1966 and up with Manual Reversing Transmission. Ind: 231, 233, 335, 2600, 3600 all with 6 speed 1975 and up. Ind: 231, 233, 333, 335, 420, 515, 531, 532, 535, 2600, 3600, 340, 445, 540, 545, 4100, 4600, 4600SU all 8 speed 1975 and up. For 5600, 6600, 7600 with 7 and 8 speed 1975 and up. For 5700, 6700, 7700 with 7 and 8 speed 8-1976 and up. For 335, 2600, 3600, 340, 420, 515, 535, 445, 540, 545 all with Manual Reversing Transmission 1975 and up. For 5700, 6700, 7700, all clutch controls 8-1976 and up. For 8000, 9000, TW10, all clutch controls 1968 and up. For TW20, TW30, both clutch controls 1979 and up. Replaces C7NN7A247A, 81817901 (Item #: 115052, Ref: C7NN7A247A) $14.30

Starter Solenoid - Hitachi Style, 12 Volt, 3 Terminal Solenoid. It is used on many Ford / New Holland Tractors and Industrial models using Hitachi Starter numbers: S13-61, S13-61A, S12-62, S13-32, S13-32A, S13-73, S13-74, S1361, S1361A, S1262, S1332, S1332A, S1373, S1374. Replaces Ford / New Holland part numbers E2NN11390AA, SBA185816070, SBA185816200, SBA185846183. Replaces Hitachi Part Numbers 2114-67006, 2130-17004, 2130-8700, 2114-37003. Replaces Isuzu Part Numbers 8-94216-6330, 8-94218-7720. (Item #: 128269, Ref: E2NN11390AA) $30.50

Voltage Regulator, 12 Volt - Voltage Regulators for Motorola Style Alternator, numbers D5NN10300E, D5NN10300D, D6NN10300A, D7NN10300B or D5NN10300D used on models 231, 2310, 233, 234, 2600, 2610, 340, 340A, 3600, 3900, 4100, 420, 445, 4600, 515, 531, 532, 535, 540, 540A, 545, 550, 555, 555A, 555B, 5600, 5700, 650, 655A, 6600, 6700, 755, 755A, 755B, 7700, 8700, 9700. All with diesel engines and an alternator. Replaces D1NN10316A, D1NN10316B, 21A656, D7NN10316B, D3NN10316A. (Item #: 119939, Ref: D1NN10316A) $38.50

Engine Gaskets

Block to Rear Engine Plate Gasket - Block to Rear Engine Plate. Fits Ford tractors 1965 and later, gas and diesel. Replaces original part numbers C7NN6N008B, 81820964, C7NN6N008A, VPC5310, 1820964. (Item #: 123602, Ref: C7NN6N008B) $6.60

Crank Seal, Front - Fits 3, 4 and 6 Cylinder Engines in: 2000, 2600, 3000, 3600, 3610, 3910, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6640, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8160, 8200, 8240, 8260, 8340, 8360, 8560, 8600, 8700, 9000, 9200, 9600, 9700, TS80, TS90, TW10, TW20, TW30. 60MM X 89MM X 12MM. Replaces 81813951, 81815927, 83999512, 1815927, F0NN6700CA, 83908809, 87800348, 87800696, 87802755, C5NN6700A, D5NN6700A (Item #: 106352, Ref: D5NN6700A) $8.50

Oil Pan Gasket - For the following 3 Cylinder Gas or Diesel Engines: 158, 175, 192, 201 CID, used in tractors 1965 and newer: 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 5000, 5100, 515, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 55A, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7630, 7700. Replacing 83990594, D0NN6710B, 87295239, 81824481, 1824481, F0NN710AA. (Item #: 106335, Ref: F0NN6710AA) $9.40

Rear Seal Gasket - Gasket, Crankshaft Rear Seal Retainer. For 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 345C, 345D, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 445C, 445D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5110, 515, 530A, 531, 532, 535, 545C, 545D, 550, 555, 555A, 555C, 555D, 5600, 5610, 5700, 575D, 5900, 6410, 655, 655A, 655C, 655D, 6600, 6610, 6700, 6710, 675D, 6810, 7100, 7200, 7410, 755, 755B, 7600, 7610, 7630, 7700, 7710, 7810, 7910, 8000, 8030, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 3959128, 83959128, 83957246, 81813951, E9NN6N305AA, 81864478, 81864478GV, 87554506, E5HN6N305AC, E9NN6N305AB, VPC5311 (Item #: 172805, Ref: E9NN6N305AB) $4.10

Valve Cover Gasket, 3 CYL - Gasket, Valve Cover. For 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 530A, 531, 532, 535. (Item #: 128747, Ref: C7NN6584B) $5.90

Engine Parts

Camshaft - For tractor models 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610, 4100, 3055, 3100, 335, 340, 3400, 3500, 3550, 3900, 3910, 4110, 4140, 420, 4200, 4400, 4410, 4500, 515, 532, 535, 545, 550, 555, ALL 3 CYLINDER DIESELS. 3610, 3910, BOTH GAS ENGINES. Camshaft also replaces C7NN6250E, 87800323. (Item #: 150910, Ref: E8NN6250AA) $112.00

Connecting Rod Assembly (36mm Journal) - New. Replaces C7NN6200A, E3HN6200AC, E4NN6200AB, E9NN6200AB, E9NN6200CA, F9NN6200AB, 81864279, 81875622, E3HN6200AC42, F2NN6200BA (*NOTE: Replace the complete set when replacing C5NE6200A Gas 1965-3/1968).C7NN6200A (Item #: 128642, Ref: C7NN6205) $101.00

Crankshaft Pulley - Used on Ford / New equipment built 1965 and later. This is a single groove pulley. This pulley is not for Shibaura built compacts. Replaces D5NN6A312A, 83903583 (Item #: 154921, Ref: D5NN6A312A) $134.00

Crankshaft Pulley Spacer - Used on many Ford / New Holland models, 1965 and later, this is a keyed spacer. It fits behind the crankshaft pulley. Replaces OEM part numbers 83995427, 1811427, 81811427, C5NE6B306A, C5NE6C306A (Item #: 154924, Ref: C5NE6B306A) $20.30

Idler Pulley With Bracket - This Idler Pulley With Bracket is used on multiple Ford / New Holland Agriculture and Industrial models. It replaces part numbers 83986807, E6NN8A614AB (Item #: 160935, Ref: E6NN8A614AB) $117.00

Intake Valve Seal - Used on Ford / New Holland equipment, 1965 and later with BSD diesel engines (not Shibaura engines), this seal replaces OEM numbers 81804329, 86602420, C5NE6571A, 1804329. Used on 3, 4 and 6 cylinder engines. One used per intake valve. Sold individually. (Item #: 166331, Ref: C5NE6571A) $0.80

Push Rod - For 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7700, 231, 233, 333, 420, 515, 532, 535. All with 3 or 4 cylinder Diesel from 1975 to 1981. Push Rod 12.17 inches long. (Item #: 165225, Ref: C5NE6567B) $5.80

Rear Engine Seal Retainer - Used Ford / New Holland engines BSD442, BSD444, BSD444T, BSD666, BSD666T on equipment 1975 and later. The retainer is used with E5NN6701BA crankshaft seal and E9NN6N305AB gasket, sold separately. This part replaces original part numbers E5HN6N306AB, E5HN6N306AC, 81868536 (Item #: 168950, Ref: E5HN6N306AB) $157.00

Ring Gear, Flywheel - This New Starter Flywheel Ring Gear has a 14.634 inside diameter, a 16.245 outside diameter and 162 teeth. It is used on the following gas tractors built 1965 and later: 2000, 230, 231, 233, 234, 2600, 2610, 3000, 333, 334, 335, 340, 3400, 3500, 3600, 3610, 4000, 4100, 4110, 420, 4400, 445, 4500, 4600, 4610, 5000, 530, 531, 532, 535, 540, 545, 550, 5500, 555, 5550, It replaces original part number C5NE6384B. (Item #: 154730, Ref: C5NE6384B) $156.00

Rocker Arm - Rocker Arm for Exhaust Valve. For 3 -4 and 6 cylinder tractor models, 1965 and later. 2000 3 cylinder, 3000, 4000 3 cylinder, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5/1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. Replaces 81804316, C5NE6529A, D5NE6529A (Item #: 178902, Ref: C5NE6529A) $57.00

Rocker Arm - Rocker Arm, for Intake Valve. Replaces D9NN6529AA. For 3 cylinder tractor models 2000, 3000, 4000, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5/1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. (Item #: 186991, Ref: D9NN6529AB) $27.60

Timing Gear, Crankshaft - 26 Teeth, Internal Keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401 and 401T Engines. For tractor models 231, 233, 234, 333, 334, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 655, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330. Replaces E3NN6306BA, C5NE6306A, E3NN6306BA, 3NN6306BA. (Item #: 183437, Ref: C5NE6306A) $61.00

Valve Spring - Used on for 158, 175, 192, 201, 256, 268 and 401 CID gas and diesel engines. One used per valve. It replaces C7NN6513A, D6NN6513A, 81817098, 83911693. (Item #: 166305, Ref: D6NN6513A) $2.80

Engine Pistons and Sleeves

Piston Sleeve, 4.2 Inch Bore - This is a semi-finished straight sleeve (no lip) for 4.2 inch bore engines. It is used when repairing non-sleeved engines, boring and honing required. Inside diameter 105.530mm (4.200 inches). Outside diameter 110.870mm (4.362 inches). Overall height 209.550mm (8.250 inches). Replaces 81815327, 87295246, C5NN6055A (Item #: 160001, Ref: C5NN6055A) $32.30

Exhaust System

Exhaust Pipe Gasket - This gasket is used with D6NN5246N Exhaust Pipe. (Item #: 124215, Ref: E0NN5C250BA) $2.50

Exhaust Pipe, Vertical - Used with Exhaust Manifold D3NN9430A. For tractor models 2600, 3600, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 3230, 3430, 3930, 4130, (4640 less turbo), 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B. Uses E0NN5C250BA Gasket, sold separately. Replaces 83909902, 86611214, D6NN5246N. (Item #: 101528, Ref: D6NN5246N) $60.00

Muffler - Vertical Round Muffler, Aluminized. This high quality Muffler has Internal Baffles. Inlet 1-7/8 inch inside diameter, outlet 2 inch outside diameter. Dimension A = 29 inches overall length. Inlet is not offset. For 2000, 3000, 4000, 5000, 2600, 3600, 4100, 4600, 4110, 4610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 340, 340A, 340B, 3500, 3550, 420, 445, 450, 455, 4110LGC, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Replaces DHPN5230A and FO17. (Item #: 100575, Ref: C7NN5230JM) $41.00

Muffler - Oval muffler, for vertical exhaust, black. Inlet 1-7/8 inch inside diameter, outlet 2 inch outside diameter, 49 inches overall length. For 2000, 230A, 231, 2600, 2610, 2810, 2910, 3000, 335, 3600, 3610, 3910, 420, 532. (Item #: 100593, Ref: E4NN5230FA17M) $74.00

Muffler, Black - Round muffler, black. This high-quality muffler has internal baffles. Inlet 1-7/8" I.D. Outlet 2" O.D., DIM A = 29" overall length. Inlet is not offset. For 2000, 3000, 4000, 5000, 2600, 3600, 4100, 4600, 4110, 4610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 340, 340A, 340B, 3500, 3550, 420, 445, 450, 455, 4110LGC, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Replaces DHPN5230A and FO17. (Item #: 131545, Ref: C7NN5230JM-B) $58.98

Fuel System / Air Intake

Air Cleaner Cover - Twist locks into top of air cleaner. Diameter 6 1/4 inches. For tractor models 2000, 3000, 4000, 4000SU, 2600, 3600, 4600, 4600SU, IND: 230A, 231, 234, 334, 335, 340, 340A, (3400, 3500, 3550 GAS/DIESEL), 2110LCG, 4110LCG, (4400, 4500 GAS/DIESEL), 445, (515 GAS/DIESEL), 530A, 531, (532 GAS/DIESEL), 545. NOTE: FORD HAD MORE THEN ONE COVER PLEASE COMPARE YOUR TAB DEPTH AND DIAMETER BEFORE ORDERING. (Item #: 113721, Ref: C5NE9661A) $85.00

Air Cleaner Cover Assembly - For tractor models 230, 231, 233, 234, 2600, 2600N, 2600V, 333, 334, 335, 3600, 3600N, 3600V, 3900, 4100, 4600, 515, 530, 531, 532, 5600, 6600, 7600. Replaces D0NN9661B, D1NN9661A, D5NN9661A, D8NN9661BA (Item #: 113722, Ref: D8NN9661AA) $97.00

Air Cleaner Cover Assembly - This is an Air Cleaner Cover Assembly which measures 9 1/2 inch Diameter. For 3 cylinder tractor models 2600, 3600, 3900, 4100, 4600, 230A, 234, 333, 334, 340, 340A, 340B, 515, 530A, 531, 532, 540, 540A, 540B. Replaces D0NN9661B, D1NN9661A, D5NN9661A, D8NN9661BA (Item #: 113722, Ref: D8NN9643BA11Z) $97.00

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple Ford/New Holland models. It replaces original part numbers 81870839, D2NN9C673B, F0NN9C673AA. (Item #: 121925, Ref: T23262) $6.40

Air Cleaner Hose - This Air Cleaner Hose fits 231, 233, 2600, 2600V, 333, 335, 3600, 3600V, 3900, 4600, 4600SU, 5110, 515, 531, 532, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710. The large end diameter is 2 1/2 inches and the small end is 2 inch. It replaces OEM part number D9NN9B640AA. (Item #: 182918, Ref: D9NN9B640AA) $12.90

Air Filter Element, Inner - Outside diameter top is 2-1/8 inches, outside diameter bottom 2-9/16 inches, inside diameter top 3/8 inches, inside diameter bottom 1 7/8 inches, height 10-5/16 inches. Inner Filter fits GAS tractors: (2000, 3000, 4000 all 1/1973>) 2600, 3600, 4600, 2610, 3610, 4610. Industrials: (2110LCG, 3400, 3550, 4110LCG, 4400, 4500 all 1/1973>), 230A, 231, 335, 340A, 420, 445A, 515, 531, 532, 535, 545. DIESELS: (3400, 3500, 3550 all 1/1973>), 335 (up to 5/1976), 420, (515, 531, 532, all up to 5/1976), 535, 550, 6500. Replaces D2NN9R500A515. (Item #: 121321, Ref: E6NN9R500DA) $49.80

Air Filter Element, Outer - Outside diameter 4 1/2 inches, inside diameter 2 1/4 inches, height 10 11/16 inches. Outer Filter fits GAS tractors: 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610. Industrials: 2110LCG, 230A, 231, 3400, 3500, 3550, 335, 340A, 4110LCG, 4400, 4500, 420, 445A, 515, 531, 532, 535, 545. DIESELS: 3400, 3500, 3550, 335 (up to 6/1976), 420, (515, 531, 532, all up to 5/1976), 535. Replaces 1026131M92, D0NN9B618B, AF492, D0NN9B618B, C5NE9A641A, E6NN9B618AB, 81823386, E6NN9B618AA, C7NN9A641A, C7NN9A641C, D2NN9R500A. (Item #: 121320, Ref: E6NN9B618AA) $24.00

Air Filter, Outer - For tractor models (550, 555 from 1975 to 7/1981), (555A, 555B from 1975 and later), (2600, 3600, 3900, 4100, 4600 from 4/1976 and later). Measures 11.45 inches long, 5.30 inch outside diameter, 3.03 inch inside diameter. Replaces D5NN9601A, D5NN9601B, D6NN9601A, E6NN9601A, E9NN9601BA, 83908364, 3414560, 0003414560, AZA194, 9583, CR9583, 9583M, P526500, LAF8551 (Item #: 121138, Ref: D6NN9601A) $18.40

Carburetor Kit, Basic - Holley carbs. For tractor models 2000, 3000, 4000, Ind. 2110LCG, 3400, 3500, 4110LCG, 4400, 4500, 231, 233, 333, 335, 340, 340A, 420, 445, 515, 531, 532, 540, 540A, 545, 550, 555, 555A, 555B. Replaces CKPN9591A. (Item #: 182790, Ref: CKPN9591A) $40.20

Fuel Cap, Vented - 2-7/8 inch outside diameter, silver finish, 1-3/4 inches edge of tang to edge of tang, vented, includes gasket. For tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35 -- Industrial: 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 3400, 345C, 345D, 3500, 3550, 420, 4400, 445, 445A, 445C, 445D, 450, 4500, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 650, 6500. (Item #: 184806, Ref: C5NN9030D) $9.10

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Includes bleeder port and screw. Replaces original part numbers 83937061, C5NE9165C, C7NN9162B, D9NN9165BA. Replacement filter for this unit is CAV7111296. (Item #: 183733, Ref: 1446017M91) $35.00

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $15.90

Fuel Filter Screw Kit - Used on many tractors, this screw kit is used in CAV style diesel fuel filter assemblies. Replaces OEM numbers D2NN9N090B, 81829151, 7111-604, 7111-860. Used on Ford: 2000, 2100, 2110, 2120, 2300, 231, 2310, 233, 2600, 2600N, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3300, 3310, 333, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 5000, 5100, 5110, 515, 5200, 531, 532, 5340, 535, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210 (Item #: 179631, Ref: D2NN9N090B) $7.80

Fuel Lift Pump Repair Kit - Used to repair original equipment fuel lift pumps on Ford / New Holland models: 2150, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 4600, 5000, 5100, 5110, 5200, 532, 5340, 5500, 5550, 5610, 5900, 6410, 650, 6500, 655, 655A, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 750, 7500, 755, 755A, 755B, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Major, Super Major, TW10, TW15, TW20, TW25, TW30, TW35, TW5. This repair kit replaces OEM numbers 81458909, 500093, 693F9K340AA, B1016 (Item #: 172699, Ref: 693F9K340AA) $20.60

No
Picture
Fuel Sender, Screw Held - For 3-cylinder tractors (1965 and newer): 2600, 3600, 3900, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610. Industrials: 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 531, 532, 535, 540A, 540B, 545, 545A, 545C, 545D. (Item #: 102189, Ref: 83943961) $59.00

No
Picture
Fuel Sending Unit - This Fuel Sending Unit is mounted with 6 bolts and is for 4 cylinder engine. For 5600, 6600, 7610, 5610S, 6610S, 7610S, 7810, 5110, 531, 532, 5900, 6410, 6600 and 8010S. Also replaces D8NN9A316LA. (Item #: 119735, Ref: D8NN9A316LB) $82.00

Injection Line Set - Used with rotary injection pump. For tractor models: 2310 (1/1/81-2/28/90), 2600, 2600, 2610 (1/1/81-2/28/90), 2610 (V, 1/1/81-2/28/90), 2810 (1/1/81-2/28/90), 2910 (1/1/81-2/28/90), 3600, 3610 (1/1/81-2/28/90), 3610V, 3610 (NO, 1/1/81-2/28/90), 3900 (1/1/75-later), 3910, 4110 (1/1/81-2/28/90), 4600, 4600SU (1/1/75-later), 4610 (1/1/81-2/28/90), 4610 (V, 1/1/81-2/28/90), 4610 (N, NO, 1/1/81-2/28/90), 4610SU (1/1/81-2/28/90). Compatible with Ford Construction and Industrials: 230A (1/1/81-2/28/90), 231 (1/1/75-later), 233 (1/1/75-later), 234 (1/1/81-2/28/90), 333 (1/1/75-later), 334 (1/1/81-2/28/90), 335 (1/1/81-2/28/90), 340, 340A, 340B, 420 (1/1/75-later), 445, 445A, 455 (7/1/87-11/30/88), 515 (1/1/75-later), 530A (1/1/81-2/28/90), 531 (1/1/75-later), 532 (1/1/75-later), 535 (1/1/75-later), 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B Replaces E0NN9A555AA, D9NN9A557AA, D9NN9A556AA. (Item #: 162827, Ref: FPL500) $45.10

Injection Pump Cover Plate - This Cover Plate is used with CAV injection pumps. Replaces Ford OEM nos C7NN9G578A, 81827350, 83903026, 83926998, D2NN9G578A, D4NN9G578A, E0NN9G578AA (Item #: 113720, Ref: E0NN9G578AA) $53.00

Injector Nozzle - For tractor models 532, 535, 540, 540A, 540B, 545, 545A. (Item #: 182794, Ref: D4NN9E527B) $54.00

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $37.00

Injector Pump Repair Kit - Fits DPA CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $16.00

Manifold Heater - This Thermostart Intake Manifold Heater is used on multiple Ford Diesel Tractors. It replaces original part numbers C5NE9A436A, E1NN9A436AA and 81806046. For Diesel Tractor Models 2000, 2110 LCG, 230A, 231, 233, 234, 2600, 2610, 3000, 333, 334, 335, 340, 3400, 340A, 3500, 3550, 3600, 3610, 3900, 4000, 4100, 4110, 4110LCG, 420, 4400, 445, 4500, 4600, 4610, 5000, 515, 530A, 531, 532, 535, 540, 540A, 545, 550, 5500, 555, 5550, 5600, 5610, 5900, 655, 6600, 6610, 6700, 6710, 7000 and 7600. (Item #: 118792, Ref: 3583543M2) $11.80

Pre Cleaner Assembly - Air Pre-Cleaner Assembly with a 2 inch base inner diameter and a 5 1/2 inch bowl. Fits models 1801, 2000, 231, 2600, 3000, 335, 3600, 4000, 4600, 5000, 515, 531, 532, 6000, 801, 901 Replaces B9NN9A660A, 86555327, B9NN9A667A, and C0NN9A660A. (Item #: 186846, Ref: 101579AS) $85.65

Precleaner Bowl - Precleaner Bowl of clear plastic with 10 1/2 inch outside diameter. Designed for tractors with a 3" to 4" inlet. Outer diameter measures 10-1/2 inches at the top. Side height measures 3 inches. Inner diameter of the cone measures 5-9/16 inches at the top. Overall height measures 4 inches. Replaces C9NN9A663A, 594075, 80330381, 81821685 (Item #: 107972, Ref: C9NN9A663A) $9.50

Precleaner Cap Assembly - This new Air Pre-Cleaner Cap Assembly fits tractor models 1801, 1811, 1821, 1841, 1871, 2000 3 cylinder, 2600, 3000, 3600, 4000 3 cylinder, 4600, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1881, (5000 Gas with Oil Bath Air Cleaner), (532 Diesel with Oil Bath Air Cleaner ), (6000 Gas/Diesel with Oil Bath Air Cleaner). Industrial: 231, 335, 515, 531. Replaces: 81823387, 86555327, B9NN9A660A, B9NN9A667A, C0NN9A660A. It has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. (Item #: 186846, Ref: B9NN9A660A) $85.65

Throttle Rod Grommet - This Throttle Rod Grommet is used on Ford Tractors 1953 to 1974. It Replaces original part numbers: 353873S, 83416731, 83935151. (Item #: 164360, Ref: 353873S) $2.60

Gauges

Fuel Sender - Fuel Sender with gasket, screw held. Used on some Ford Tractors, 1965 and later. Verify part number. Replaces E3NN9A316CA and 83943961. (Item #: 102189, Ref: 83943961) $59.00

Lens, Instrument Cluster, Plastic - Fits 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 340A, 340B, 3430, 345C, 345D, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 420, 445, 445A, 445C, 445D, 450, 455, 4600, 4610, 4630, 4830, 5030, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5610S, 5900, 655, 655A, 6600, 6610, 6610S, 7600, 7610, 7610S, 7810, 8010. (Item #: 125556, Ref: 83918700) $36.30

Shaft and Cable Assembly - Shaft and Cable Assembly, Adapter to Tachometer Cable, 4-1/4 inches long. For 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3230, 333, 334, 335, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5030, 515, 530A, 531, 532, 535, 5600, 5610, 5700, 5910, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710. Replaces OEM numbers D3NN17N275A, E9NN17N275AB, F1NN17N275AA, 81834274, 83987694, 87760307. (Item #: 121548, Ref: F1NN17N275AA) $5.20

Tachometer Adapter - This Tachometer Adapter fits the following tractor models: 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 340A, 340B, 3430, 345C, 345D, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 420, 445, 445A, 445C, 450, 455, 455C, 455D, 4600, 4610, 4630, 4830, 5030, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5900, 650, 655, 655A, 6600, 6610, 6700, 6710, 750, 755, 755A, 755B, 7600, 7610, 7700, and 7710. Replaces: 87800006, D3NN17N264B, D8NN17N264AA, E3NN17N264AA, E4NN17N264AA, E9NN17N264AA, F1NN17N264AA, F1NN17N264AB and 81873710. (Item #: 125558, Ref: 87800006) $28.50

Temperature Sender - Temperature Sender, Water. The part may come with a spade terminal which might require changing your wire end. 3/8 Inch NPT Thread.Replaces: 81818428, 83904449, 83904448, 81837742, 83911735, 83948391, 8712608, 82028131, 9712608, D8NN10884AA, E1NN10884AA, 2080406, 3917490, 73403367 (Item #: 128314, Ref: D5NN10884A) $10.40

Hitch / Drawbar

Bracket Left Hand - Bracket, Left Hand Stabilizer. For 250C, 260C, 2810, 2910, 3230, 335, 3430, 345, 345D, 3550, 3900, 3910, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 420, 4400, 445, 4500, 4600, 4610, 4630, 4630N, 4830, 4830N, 5030, 515, 532, 535, 7630. Replaces C7NND932B (Item #: 119989, Ref: C7NND932B) $31.00

Bracket Right Hand - Bracket, Right Hand Stabilizer. For 250C, 260C, 2810, 2910, 3230, 335, 3430, 345, 345D, 3550, 3900, 3910, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 420, 4400, 445, 4500, 4600, 4610, 4630, 4630N, 4830, 4830N, 5030, 515, 532, 535, 7630. Replaces C7NND933B (Item #: 119988, Ref: C7NND933B) $30.80

Drawbar - Swinging Drawbar, 32-3/8 inch overall length, 540 rpm PTO. For 2100, 2810, 2910, 3100, 3230, 3430, 3900, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 515, 532. Replaces C5NN805J, DJPN825A (Item #: 168183, Ref: C5NN805J) $134.00

Fork - Fork for Leveling Box. Length 20 inches, thread 13/16 inch-12. For 3900, 4100, 4110, 420, 4600, 4610, 515, 532, 535. (Item #: 182831, Ref: E0NN585CA) $55.00

Leveling Box Assembly with Fork and Knuckle - Category I, 28 inch minimum length, 7/8 inch fork spacing, 3/4 inch holes. For tractor models 3900, 4600SU, 2810, 2910, 3910, 4110, 4610, 250C, 260C, 340A, 340B, 345C, 420, 445, 445A, 445B, 445C, 515, 532, 535, 540, 540A, 540B, 545, 545B, 545C. Replaces E0NN569DA, E0NN585CA, 83954426, D8NN569BA, D3NN569E, E4NN569BA, D5NN569D, 83925901 (Item #: 169749, Ref: E4NN569BA) $204.37

Lower Lift Arm, Cat II - Left or right hand, 34.646 inch center hole to center hole, 3.504 inch wide, .709 inch thick, Rigid Forged Type Ends. For tractor models 250C, 260C, 2810, 2910, 3000, 3055, 3230, 3430, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4200, 4330, 4340, 4400, 4410, 445D, 4500, 4600, 4610, 4630, 4830, 5030, 515, 532, 535, 545D. Color varies. Replaces 82002004, C5NN555AL, C7NN555S. (Item #: 122629, Ref: 81821330) $127.00

Lower Lift Arm Pin Nut - Used on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 83904384, 86637930, 87446, 33987S, 33987S36, 81419279, 701647, 353927X1, 170917423, 70917423, 6217938M1 (Item #: 178033, Ref: 353927X1) $1.70

Lower Lift Arm Pin Nut - Used internally on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Nylon Lock Nut. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 376450X1, 376267X1, 360262X1, 1679532M1 (Item #: 190743) $0.60

$Ford 532 Lower Link Lift Arm (CAT 1\2)$
Lower Link Lift Arm (CAT 1/2) - Ford Lower Lift Arm R/H (CAT 1/2) measures 35 5/8 inches of length, 3 1/2 inches wide, and 11/16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954401. (Item #: 122628, Ref: E5NN555AA) $106.00

$Ford 532 Lower Link Lift Arm L\H (CAT 1\2)$
Lower Link Lift Arm L/H (CAT 1/2) - Ford Lower Lift Arm L/H (CAT 1/2) measures 35 5/8 inches of length, 3 1/2 inches wide, and 11/16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954402. (Item #: 122627, Ref: E5NN556AA) $107.00

Hydraulic System

Cylinder, Side Link - Side Link Hydraulic Cylinder. (Item #: 178907, Ref: HSL3201) $334.00

Cylinder, Top Link - Top Link Hydraulic Cylinder. (Item #: 167107, Ref: HTL3101) $325.55

Double Spool Remote Valve Kit - This Double Spool Double Acting Hydraulic Remote Valve Kit includes valve, levers, o-rings and hoses. Depending on application, hoses may need an extra fitting to lengthen. Hose bracket and female couplers. Non detent, spring centering. Mounts on the lift cover (under the seat). Some seat brackets may have to be modified for clearance. Use with 8010-4 male plugs for the couplers (not included). Will not fit compact tractors. Will NOT fit NAA, Jubilee, Golden Jubilee (bolt pattern is different). 3/8 inch BSP threaded hoses. Replaces 309973, 309973F, 309996, 80309973, 83928704, 83944762, C9NNB950B, E1NNB950BA, E1NNB950BB (Item #: 168679, Ref: E1NNB950BB) $620.00

Draft Control Handle - This Draft Control Handle is used on many ford tractor and industrial models. It replaces original part numbers D3NNB505B, ESL11003, 81843895. (Item #: 179289, Ref: D3NNB505B) $34.00

Draft Control Shaft - This Draft Control Shaft is 8-3/4 inches long. It is used on multiple Ford Models. Replaces original part number D3NNB911B, 81843896, 81843986 (Item #: 180164, Ref: D3NNB911B) $45.80

Drive Gear Shroud, Hydraulic Pump - For tractor models (3000, 340, 3900, 4000, 4100, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 4500, 4600, 460NO, 4600SU, 515, 532, 540, 545 all with independant PTO). (Item #: 172659, Ref: C5NNN872A) $34.54

Hydraulic Adapter Kit - Hydraulic adapter plate kit. Contains 1-HV4901 adapter plate, mounting cap screws, O-rings and mounting instructions. 3/8 inch NPT ports. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Item #: 111565, Ref: HV4902) $89.00

Hydraulic Filter, Steel Mesh - Steel Mesh Hydraulic Filter replaces OEM number 81802002. Used on 2000, 3000, 4000, 2600, 3600, 3900, 4600, 5600, 6600, 6700, 7600, 7700, 231, 335, 420, 515, 531, 532, 535. Measures 2 3/4 inch tall, 2 1/8 inch Diameter with a 3/4 inch center 3 prong hole. Does not include rubber seals and we do not have them available. YTO C5NNN832B (Item #: 113711, Ref: C5NNN832B) $11.20

No
Picture
Hydraulic hose Assembly - Hose, 44". (Item #: 179992, Ref: HV4977) $41.20

No
Picture
Hydraulic Lift Arm, Left Hand - This Left Hand Hydraulic Lift Arm is used on FORD 3900, 4100, 4600, 2810, 2910, 3610, 3910, 4610, 3230, 3430, 3930, 4630, 4830, 5030, 250C, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 532, 535, 540, 540B, 545, 545A, 545B, 545C, 545D. It Replaces D3NNB921A. (Item #: 131822, Ref: D3NNB921A) $179.94

Hydraulic Lift Arm, Right Hand - This Right Hand Hydraulic Lift Arm is used on FORD 3900, 4100, 4600, 2810, 2910, 3610, 3910, 4610, 3230, 3430, 3930, 4630, 4830, 5030, 250C, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 532, 535, 540, 540B, 545, 545A, 545B, 545C, 545D. It Replaces D3NNB920A. (Item #: 178945, Ref: D3NNB920A) $179.94

Hydraulic Plug - Hydraulic Plug measures 1 5/8 x 12 thread. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 450, 4500, 4600, 4610, 5000, 5100, 5110, 515, 5190, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 5600, 5610, 5900, 6410, 655, 655A, 6600, 6610, 6810, 7010, 7100, 7200, 745, 7600, 7610, 8000, 8010, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, DEXTA, FMD, SUPER DEXTA, TB100, TB110, TB120, TB80, TB85, TB90, TW10, TW20, TW30. Replaces 83911792, D6NN7222A, 81804565, 83911793, D6NN7222B. VERIFY DIMENSIONS OR OEM BEFORE ORDERING. (Item #: 113703, Ref: 957E7010) $15.10

Hydraulic Pump - This is a new Piston Type Hydraulic Pump with Push In and 3/4 inch screw In lines. It is used on 2600, 3600, 4600, 2310, 2610, 3610, 4610, 230, 231, 335, 340, 340A, 420, 445, 515, 530A, 531, 532, 535, 540, 540A, 545 tractors. Replaces original part number D6NN600A. (Item #: 182967, Ref: D6NN600A) $1000.00

Hydraulic Pump - Fits the following tractors (less Synchro Transmission) using Transmission Mounted Pump with Relief Valve: 4600, 2810, 2910, 3900, 3910, 4100, 4110, 4610, 3230, 3400, 3430, 3930, 4130, 4630, 4830, 5030, 250C, 260C, 340A, 340B, 345C, 345D, 420, 455A, 445S, 445D, 515, 532, 535, 540A, 540B, 545A, 54C, 545D. Uses D4NN915A Gasket, not included. Replaces 83936585, D8NN600LB, D3NN600B, D6NN600E, D8NN600LA, D8NN600LB-E, D8NN600LBV, VPK1016, 81836736, 83908243, 83926104, 83936585 (Item #: 104254, Ref: D8NN600LB) $358.00

Hydraulic Pump Gasket - Hydraulic Pump Gasket is used on fits pumps D8NN600KB and D8NN600LB. It replaces original part numbers 83961379, D4NN915A, E7NN915AA (Item #: 156043, Ref: D4NN915A) $5.40

Hydraulic Pump Hub - For tractor models: 335, 340, 3400, 340A, 340B, 4400, 515, 532, 535, 540, 730. Hub. 5-1/4 inch overall diameter, 4 mounting holes 7/16 inch diameter, smooth type, 3-7/8 inch spacing. 1-9/16 inch relief diameter, 3/4 inch depth. 13 spline center bore, 7/8 inch diameter. This pump has 13 splines and is NOT threaded. Used with 291951, 292222, 7701044 pump shaft. Replaces 86509731, C5NNN879A. Used with 291315 and on some crankshaft pulleys. Measure crankshaft pulley before ordering. (Item #: 112192, Ref: C5NNN879A) $52.00

Hydraulic Pump Mounting Gasket - For Transmission Mounted Hydraulic Pumps on Ford models: 250C, 2810, 2910, 335, 340, 340A, 340B, 345C, 345D, 3910, 3910N, 3910V, 4110, 4110N, 4110V, 420, 445, 450, 455, 455C, 455D, 4610, 4610N, 4610V, 4830, 4830N, 5030, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A. This gasket replaces Ford part numbers E7NN915A, D4NN915A, 83961379 (Item #: 156043, Ref: E7NN915A) $5.40

Hydraulic Pump Repair Kit - This Comprehensive Hydraulic Pump Repair Kit contains items in image marked with an asterisk; 1 - Wobble Shaft D9NN966AA, 1 - Wobble Shaft Needle Bearing 169024, 1 - Idler Gear Shaft C5NN872A, 2 - Idler Gear Shaft Needle Bearings C5NNN900A, 1 - Wobble Shaft Bearing Plate C0NN859A, 6 9/16 Pistons C5NN615A, 6 5/8 Pistons NCA615C, 6 - Pistons Springs NCA861B, 6 Inlet Springs NCA647B, 6 - Outlet Springs C5NN646A, 12 - Balls 354872S, 6 - Seats C5NN885A, 6 - Cages C0NND844A, 6 Cages C0NND843A, 1 Bearing Cup 141296, 1- Bear Cone 141295, Seals C5NN851A, and Gaskets E4NN911AA, D6NN867A, C0NN869A, 1 Woodruff Key 81797891. Replaces CKPN600A, 81821107, 5A-1306. For Tractors 1965-1983 with Piston style pumps. (Item #: 185394, Ref: S65428) $320.00

Lift Cover Gasket - Used of Ford Tractors 1965 and later, this gasket replaces OEM part numbers 957E502, E7NN502AA, C5NN502A, 83963584 (Item #: 113960, Ref: C5NN502A) $3.50

Lift Cylinder Safety Valve - This Lift Cylinder Safety Valve has 3/4 x 16UNF Right Hand Threads. It is used on Ford / New Holland 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 340A, 340B, 3430, 345C, 345D, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 420, 445, 445A, 445C, 445D, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 515, 5200, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8210, 8240, 8340, 8530, 8630, 8730, 8830, TS100, TS90, TW15, TW25, TW35, TW5. Replaces 81838679, D3NN984C, D5NN984A, 83911832 (Item #: 170948, Ref: D5NN984A) $40.70

Position Control Handle - This Position Control Handle is used on many for Tractor and Industrial Models. It replaces original part numbers D3NND943B, ESL11004, 81843895, 81843897 (Item #: 179347, Ref: D3NND943B) $35.30

Selector Valve - The Selector Valve is used on multiple Ford Tractors. Fits Models: 230, 231, 233, 234, 250, 260, 333, 334, 335, 340, 345, 420, 445, 450, 515, 530, 531, 532, 535, 540, 545, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2110, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4500, 4600, 4610, 4630, 4830, 5030. Replaces original part numbers: C5NND960C, E0NND960AA, 83906348, 83924886. (Item #: 116871, Ref: E0NND960AA) $208.00

Valve Adapter Kit - Hydraulic Valve Adapter kit. Can replace OEM adapter plate 9613790. Adapter plate in HV5902 kit features three ports: (1) pressure port, (1) power-beyond port and (1) return port. All ports 3/4" - 16 ORB. Kit contains adapter plate, o-rings, mounting bolts, plugs, and in For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Item #: 178924, Ref: HV5902) $193.00

Valve Less Handle - Valve, 2-Spool, 2000 psi. Relief, Tandem (4-way) Spool, spring center to neutral, less handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Item #: 178975, Ref: HV4023) $513.00

Valve Less Handle - Valve, 3-Spool, 2000 psi. Relief, Tandem (4 way) Spool, Spring Center to Neutral, less Handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Item #: 180405, Ref: HV4033) $691.00

Lights

Headlight Ring - Rubber ring is 4 3/4 inches outside diameter and approximately 1 inch wide. Verify OEM part number. For Fords with original Ford fender or cab mounted lights, 1968 and up. Replaces 1027218M1, 83936004, D5NN13N056A, D6NN13N056A (Item #: 155307, Ref: 1027218M1) $8.80

Headlight Washer - Used with light part number 164089AS. Replaces 82858740, 83917547, C5NN13N020B, D8NN13N020AA. For the following tractors: 515, 530, 531, 532, 535, 540, 545, 550, 555, 655, 750, 755, 665, 775, 2600, 2610, 2810, 2910, 6600, 8000, 9000, 3600, 3610, 3910, 4600, 4610, 5600, 5610, 6610, 7600, 7610 (Item #: 154899, Ref: 504781M1) $5.30

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $20.00

Sealed Beam Bulb - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $27.40

Oil System

Driveshaft - Intermediate Shaft, Oil Pump Drive. For tractor models 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 5000, 5030, 515, 531A, 532, 535, 5600, 5610, 6600, 6610, 6710, 7000, 7600. (Item #: 169650, Ref: C7NN6A605A) $7.98

Oil Dipstick - This Dipstick is 7 7/8 inches long. It is used on many Ford agriculture and industrial models, 1975 and later. Replaces: 87801534, C7NN6750C, C9NN6750A, D3NN6750C, D3NN6750D, D3NN6750E, D4NN6750B, D4NN6750D, D6NN6750B, E9NN6750BA, 81816867, 81822073, 81837146, 81837147, 81843818, 83902286, 83905287, 83918846, 83982499 (Item #: 113916, Ref: E9NN6750BA) $8.50

Oil Filter, Spin-On - Spin on style oil filter measures with dimensions of 5 13/32 inches in length, 3 11/16 inches O.D. Fits Tractor Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5610, 6600, 6610 from 1965 to 10/1969. For use with spin on filter adapter 309825. (40538S)Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Item #: 118399, Ref: E7NN6714AA) $14.50

Oil Pan - Fits 3 cylinder tractors 1965 and newer: 2000, 3000, 4000, 2600, 3600, 3900, 4100, 4600, 2310, 2610, 281, 2910, 3610, 3910, 4110, 4610, 3230, 3430, 3930, 4130, 4630. Industrial 230, 231, 233, 234, 2110LCG, 333, 334, 335, 3400, 3500, 3550, 420, 4110LCG, 445, 445A, 4400, 4500, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Cast iron construction. Does not include gasket and plug. (Item #: 140613, Ref: C9NN6675A) $376.00

Oil Pan Drain Plug - This 3/4 inch Oil Pan Drain Plug is for Ford tractor models: 230A, 231, 233, 234, 333, 334, 335, 420, 445, 445A, 450, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 755, 755A, 755B, 2000, 2600, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4400, 4500, 4610, 4630, 4830, 5000, 5030, 5500, 5550, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7500, 7600, 7610, 7700, 7710, 7810, 7810S, 7840, 7910, 8000, 8010, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8970, 9000 1970 and up. Uses C9NN6734A washer, not included. Replaces C9NN6730B. (Item #: 140610, Ref: C9NN6730B) $3.70

Oil Pan Drain Plug Washer - Used with C9NN6730B 3/4 inch Oil Pan Drain Plug. Fits models: 230A, 231, 233, 234, 333, 334, 335, 420, 445, 445A, 450, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 755A, 755B, 2000, 2110LCG, 2600, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4400, 4500, 4610, 4630, 4830, 5000, 5030, 5500, 5550, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 7840, 7910, 8000, 8010, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8970, 9000. (Item #: 140611, Ref: C9NN6734A) $1.60

Oil Pressure Switch - This oil pressure switch is made with 2 types of connectors and you may receive a typical space connector or a round connector. Whichever wire connector you have on your tractor will fit either switch. The are interchangeable. For tractor models 5030, 8530, 8630, 8730, 8830, 5640, 6640, 7740, 7840, 8240, 8340, 230A, 231, 233, 234, 250C, 260C, 2110LCG, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3400, 3500, 4110LCG, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555E, 655, 655A, 655C, 655D. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Item #: 153774, Ref: D8NN9278BD) $5.65

Oil Pump with screen - Complete Oil Pump Assembly with Lower Screen. For models: 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030. Replaces E1NN6600DA, E1NN6600DC, E1NN6600DB. (Item #: 113205, Ref: E1NN6600DD) $60.00

$Ford 532 Pump Gear\Shaft Assembly$
Pump Gear/Shaft Assembly - Gear and Shaft Assembly, Oil Pump Drive. For models: TW5, TW15, TW25, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, 230A, 233, 234, 250C, 260C, 333, 334, 335, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 550, 555, 555A, 555B, 555C, 555D, 650, 655, 655A, 655C, 655D, 750, 755, 755A, 755B. Replaces E9NN6A820AA, 87800008, C7NN6A820C, D3NN6A820E, 3984954, 81845748, 73345660, 81822957, 81837148, 83984954, 81843777, 81834095, D3NN6A820F, D3NN6A820G, C7NN6A820A, D0NN6A820A, C7NN6A820B, D3NN6A820A, D3NN6A820D, 87764586, 87764587, 81859340, 81844832, 81845749, 81818742, 87763956, D3NN6A820B (Item #: 140555, Ref: E9NN6A820AA) $30.00

PTO / Driveline

Arm, PTO Shifter - For 6 and 8 Speed transmission on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmission or live PTO). (Item #: 170968, Ref: C7NNN740A) $31.37

Coupling, PTO Clutch - For 6 and 8 speed transmission on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmission or live PTO). (Item #: 167892, Ref: C5NN717A) $70.00

Fork, PTO Shifter - For 6 and 8 Speed transmission on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmission or live PTO). (Item #: 119856, Ref: C5NN720A) $15.00

Friction Plate - Clutch Friction Plate measures 5.25 inch outside diameter, 45 internal splines and has a thickness of .063 inches. VERIFY THICKNESS as there was originally more than one size. 6 Used in most applications. Sold individually. Fits models: 550, 555, 555A, 555B, 655, 655A, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 4000, 4110, 4500. Replaces 81804831, C0NN7B164B, C0NN7B164A. (Item #: 118132, Ref: C0NN7B164B) $10.80

Input Shaft Seal - Used with Transmission driven PTOs. It is used am many Ford / New Holland Tractors. Measures I.D. 1.0675 inch, O.D. 2.1940 inch, W. 0.5000 inch. (Metric 28.5 x 55.5 x 12.4mm). Replaces E81GD9, D9NN7R510BA, 83924524, 83924924 (Item #: 173499, Ref: D9NN7R510BA) $4.00

Live PTO Shifter Plate - For 6 and 8 Speed transmission, manual reverse on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A. (Item #: 167898, Ref: C7NN721A) $24.60

PTO Brake Arm - This PTO Brake Arm is used on 250C, 260C, 2810, 2910, 3230, 335, 340, 340A, 340B, 3430, 345C, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4400, 445, 445A, 445C, 445D, 4500, 455C, 455D, 4600, 4610, 4630, 4830, 5030, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D (Item #: 173002, Ref: C9NNN747A) $23.80

PTO Cap - This PTO Cap is 4 inches long. It will not work on 5 inch PTO shafts. It has 65mm outside threads. It replaces OEM numbers: C5NN726B C5NN726A, SBA378110020, 81801856, 47811118 (Item #: 155020, Ref: C5NN726A) $22.10

PTO Clutch Plate, External Splines - This Disc is used in tractors with Independent PTOs. It measures 5.47 inches Major/ 5.278 inches Minor Outside Diameter, 3.91 inches Inside Diameter, 0.070 inches Width, 54 Teeth. 1P77518A, 83918314, C8AP7B442A, P77573A1, T100680, V32773200 (Item #: 155469, Ref: C8AP7B442A) $5.00

PTO Drive Clutch Housing - Is some applications require replacing OE C9NN7R007A with OE D5NN7R007A when used with single speed PTO. Used on 3600, 4600, 5000, 5100, 5110, 5190, 5200, 532, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700. This part replaces Ford New Holland part numbers: D5NNN707A, D5NNN07A, 83903939, 81827131 (Item #: 151874, Ref: D5NNN707A) $259.00

PTO Input Shaft - 15 Tooth Input Shaft. Fits 2810, 2910, 3900, 3910, 4100, 4110, 4600, 4610 (most industrial and utility models after 1975 with 8 speed or 6x4 Manual Reversing Transmission). 4000 (1965 and newer) Note: Can Replace the 17 tooth Input Shaft on 4000 models prior to 1972 BUT you must also order Gear Assembly part number D1NN791A. (Item #: 115256, Ref: D1NN772B) $204.00

PTO Output Cover Gasket - Used on many Ford / New Holland Tractors built 1965 and later. Replaces OEM part numbers C5NN7086A, 81815558 (Item #: 179414, Ref: C5NN7086A) $0.90

PTO Output Shaft Seal - Note that two size seals were used on the output shaft on many of the models listed. Verify measurements or OEM number before ordering. This seal measures 74.62mm inside diameter x 95.24mm outside diameter x 9.5mm wide (3.75 inches x 2.85 inches x 0.375 inches wide). Used on Ford 3600, 4600, 5000, 5100, 5110, 5190, 5200, 532, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8010, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces Ford / New Holland part numbers D9NNN710BB, D9NNN710B, 83944032 (Item #: 189274, Ref: D9NNN710B) $12.10

PTO Output Shaft Seal - Note that two size seals were used on the output shaft on many of the models listed. Verify measurements or OEM number before ordering. This seal measures 74.6mm inside diameter x 95.6 outside diameter x 12.5mm wide (3.75 inches x 2.85 inches x 0.56 inches wide). Used on Ford / New Holland 3600, 4600, 5110, 532, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 6810S, 7010, 7410, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8670, 8670A, 8700, 8730, 8770, 8770A, 8830, 8870, 8870A, 8970, 8970A, 9200, 9700, TS100, TS100 Brazilian, TS110, TS110 Brazilian, TS115, TS120 Brazilian, TS80, TS90, TV140, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 81819768, 83955173, 9823545, 89823545, D9NNN710BC, D9NN710BC (Item #: 128143, Ref: 9823545) $26.80

PTO Seal - This PTO Input Shaft Oil Seal is for models with live or independent PTO. Seal Measures .984 inches inside diameter, 1.496 inches outside diameter and .236 inches in width. For models Dexta, Super Dexta, (2000, 3000 and 4000 all with 6, 7 and 8 speed transmissions), (2610, 3610, 4100, 4110, 4600, 4610 all with 8 speed transmission). Replaces part numbers A-VPH1413 and 81717245. (Item #: 173453, Ref: 957E727A) $4.80

PTO Shaft - This PTO Shaft fits multiple Ford Tractors and industrial Models with Independent PTO. PTO shaft is 30.625 inches long, 26 tooth splines. Uses Sleeve E7NN797BA and Seal D9NN703BB (not included). It replaces D8NN725AB, 83937198. (Item #: 163804, Ref: D8NN725AB) $309.01

PTO Shaft - For tractor models (3000, 3550, 4000, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500 all 1965-1975), (3900, 4600, 515, 532, all Jan 1975-Sep 1980), 340, 340A, 340B, 445, 445A, 540, 540A, 540B, 545, 545A, all Jan 1978-Sep 1980). PTO Shaft Replaces C5NN710A, 30.625 inches long, 6 and 26 splines. Use D3NN7A693A PTO Housing Bearing for this shaft, not included. (Item #: 153457, Ref: D3NN710D) $163.00

No
Picture
PTO Shaft Bearing - This PTO Shaft Bearing is used with D3NN710D PTO Shaft. It has an inside diameter of 1.772 inches (45.008 mm), outside diameter of 3.346 inches (84.988 mm) and a width of 0.748 inches (18.999 mm). For Ford models: 3000, 3550, 4000, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 3900, 4600, 515 and 532 tractors. (Item #: 112095, Ref: D3NN7A693A) $17.30

PTO Shaft Bearing, Front - For tractor models: Dexta, Super Dexta, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 3900, 4000, 4100, 4110, 4110LCG, 4400, 4500, 4600, 4610, 5000, 5600, 5610, 5610S, 5900, 6600, 6610, 6610S, 6700, 6710, 6810, 7600, 7610, 7610S, 7700, 7710, 7810S, 8010. All WITH 1 3/8 Inch DIAMETER PTO SHAFT. WILL NOT FIT 1 1/8 Inch DIAMETER PTO SHAFT. Replaces 81800755, C5NN7118A, 20705250, E75GE9 (Item #: 178129, Ref: E75GE9) $7.00

PTO Shifter Spring - This PTO Shifter Spring is used on 6 and 8 Speed transmission on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmission or live PTO). (Item #: 179379, Ref: BB7234) $2.80

PTO Shift Lever - For 6 and 8 Speed transmission on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmision or live PTO). (Item #: 123093, Ref: C5NN723A) $37.60

Sleeve, PTO Intermediate Shaft - Has 6 and 26 splines. For 6 and 8 Speed transmissions on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmision or live PTO). (Item #: 172812, Ref: C5NNN705A) $55.00

Seats

Seat Cushion, Black - This Black Pan and Cushion Assembly for deluxe suspension seat fits tractor models: 2000, 3000, 4000, 5000, 7000 (1965-2/1969 and 2/1970-1975), 2600, 3600, 3900, 4100, 4600, 5600, 6600, 231, 233, 333, 335, 515, 531, 532 (1975-1981), 2610, 2910, 3610, 3910, 4110, 4610, 231, 234, 334, 335 (1981-2/1990), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987), 5610, 5900, 6610 (1981-10/1985). For hinged seat on 1000, 1600 (1973-1978), 1100, 1200, 1300, 1500, 1700, 1900 (1979-10/1983), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987). Replaces D1NNA405B, D2NNA405B, D2NNA405BAK, E2NNA405AA99B. (Item #: 101228, Ref: E2NNA405AA99M) $106.00

Seat Cushion, Blue - This Pan and Cushion Assembly for deluxe suspension seat fits tractor models: 2000, 3000, 4000, 5000, 7000 (1965-2/1969 and 2/1970-1975), 2600, 3600, 3900, 4100, 4600, 5600, 6600, 231, 233, 333, 335, 515, 531, 532 (1975-1981), 2610, 2910, 3610, 3910, 4110, 4610, 231, 234, 334, 335 (1981-2/1990), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987), 5610, 5900, 6610 (1981-10/1985). For hinged seat on 1000, 1600 (1973-1978), 1100, 1200, 1300, 1500, 1700, 1900 (1979-10/1983), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987). Replaces C7NNA405R, D0NNA405C, D1NNA405A, D1NNA405B, D2NNA405B, D2NNA405BAK, D8NN400BABB, E2NNA405AA99B, E2NNA405AA99M, E7NN400GA, E7NN420AA. (Item #: 101227, Ref: E2NNA405AA99MBL) $105.00

Suspension Seat - New Ford/New Holland replacement seat. Complete seat with suspension, blue. Fits Ford / New Holland Compact tractor models: 1110, 1210, 1310, 1510, 1710, 1910; Fits Industrial/Construction models: 340A, 340B, 345D, 3500, 445, 445A, 445C, 445D, 450, 515, 540A, 540B, 545A, 545C, 545D; Tractor models: 2100, 2110, 2120, 2150, 2300, 231, 2310, 234, 2600, 2810, 2910, 3000, 3055, 3100 3300, 3310, 3330, 3600, 3610, 3910, 4000, 4100, 4110, 4200, 4330, 4340, 4400, 4410, 4600, 4610, 5000, 5100, 5200, 531, 532, 5600, 5900, 6600, 6700, 7000, 7100, 7200. There is a plate on the bottom that is 4 inches wide and 8 1/4 inches long. In the center of this plate are 2 slots that are 3/8 inches wide, 1/4 inch from each edge and 1/2 inch apart and they are about 4 inches long. Overall width is 19.5 inches, overall length of base is 15.25 inches, overall height of base is 9.25 inches. (Item #: 101226, Ref: CSA698-8V) $215.00

Sheet Metal / Body Parts

Fender - This Fender comes as pictured with mounting bracket and is 25 1/2 inches tall. Fits left hand or right hand side on the following tractors: 501, 600, 601, 700, 701, 800, 801, 900, 901, (except hi-clear), 2000, 4000 (1958 thru 1964), 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 531, 532, 535 (1975 to 1981); 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 230A, 530A (1981 to 1990). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 81816643, C5NN16312AK, C5NN16312AU, C5NN16321AK, D5NN16312LR. (Item #: 104070, Ref: D5NN16312LR) $120.00

Fender, LH - Flat Top. For tractor models 2600, 2610, 2810, 2910, 335, 3600, 3610, 3910, 3930, 4100, 4110, 420, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, 515, 532, 535, 5600, 5610, 6600, 6610, 7600, 7610. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Ships freight (Item #: 105559, Ref: E5NN16313DA) $226.00

Fender, RH - Flat Top. For tractor models 2600, 2610, 2810, 2910, 335, 3600, 3610, 3910, 3930, 4100, 4110, 420, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, 515, 532, 535, 5600, 5610, 6600, 6610, 7600, 7610. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 105558, Ref: D8NN16312ABB) $269.00

Fender With Bracket, Scripted - Rear Fender with mounting bracket measures 25 1/2 inches tall. Has "FORD" script raised on the metal. ADDITIONAL $35 SHIPPING DUE TO SIZE AND WEIGHT. Fits LH or RH side. For tractor models 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (except high clearance), 2000 and 4000 (1958 to 1964); 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 532, 535, (1975 to 1981); 2310, 2910, 3610, 3910, 4110, 4610, 230A, 530A, (1981 to 1990). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104072, Ref: D5NN16312LRS) $190.00

Grill - One Piece Grill with holes for lights for 1968 and up. Measures 18 1/2 inches wide and 23 3/4 inches tall. (Item #: 111518, Ref: D5NN8200C) $68.00

Grill Screen - Metal Grill Screen for 2000, 2600, 3000, 3600, 4100, 4140, 4600, 4600SU, 5200, 5600, 5900, 6600, 7200, 7600, 231, 531, 532. One piece plastic construction like original. Grill screw clips (2 needed on most applications) available as S.60436. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104063, Ref: D5NN8200A-OEM) $33.00

Grill Screen Clip - For tractor models 2000, 2600, 3000, 3600, 4100, 4140, 4600, 4600SU, 5200, 5600, 5900, 6600, 7200, 7600, 231, 531, 532 (2 needed on most applications). Please verify quantity needed from your tractor. Replaces 45264S2, C9NN8B151B, D4NN8N213A, 83901581 (Item #: 118786, Ref: S.60436) $5.90

Hood Handle - Handle Assembly, engine hood right hand side. For 2000, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3230, 333, 335, 3430, 3600, 3610, 3900, 3930, 4000, 4110, 4140, 420, 4600, 4610, 4830, 5000, 5030, 515, 531, 532, 535, 5600, 5610, 5910, 6600, 6610, 7000, 7600, 7610. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces C5NN16N644B, D6NN16N644A, 83909243. (Item #: 113917, Ref: D6NN16N644A) $8.20

Hood, RH - For tractor models 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3600, 3610, 3900, 3910, 4100, 4110, 420, 445, 445A, 450, 4600, 4610, 515, 530A, 531, 535, 540A, 540B, 545A, 545C, 545D. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 155814, Ref: D3NN16625M) $91.00

Instrument Panel - For tractor models 2310, 2600V, 4110, 420, 4400, 4410, 445, 4500, 4610SU, 5100, 5110, 515, 531, 532, 535, 540, 540A, 545, 5600, 5610, 5900, 6600, 6610, 6810, 7100, 7600, 7610, (2110 from 1965 to 1975). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 172723, Ref: D8NN16948DB) $280.00

Steering

Axle Pin, Front - Front axle pin, manual or power steering. Outside diameter 1.750 inches, inside diameter 1.125 inches, length 4.960 inches. For tractor models 2000, 3000, 4000 and their variant. (Item #: 151913, Ref: C5NN3127B) $32.00

Bearing, Upper - This is the Upper Bearing used with D9NN3N748AA Power Steering Adapter. FORD 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981 to 9/1984), 3400, 231, 335, 531, 532 Replaces C5NN3N657A, 168109, B2012, BA2012. (Item #: 179317, Ref: C5NN3N657A) $12.80

Drag Link End, Front - A= 4.00 inch, B= 13/16 inch, 16 left hand thread. For tractor models: 3000, 335, 3400, 4000, 4410, 532. (Item #: 104593, Ref: C5NN3A300C) $26.00

Drag Link End LH - For tractor models 335, 3000, 3400. ALL with Manual and Power Steering with Non Adjustable Front Axle. Tractor 532, 4410 with Power Steering and Non Adjustable Front Axle. 1" X 16 RH Thread, Length 34.125 Center to End. TRACTOR 4000 1965> with Power Steering and Non Adjustable Front Axle. Replaces OEM part number 81812358. (Item #: 125318, Ref: C5NN3308F) $189.00

Drag Link End, Rear, RH - A= 32.00 inches, B= 1.0 inch with 1.0 inch threads. For tractor models: 3000, 335, 3400, (4000 1965 and up), 4410, 532. (Item #: 104592, Ref: C5NN3307H) $269.00

Lock Nut - Steering Gear Bearing Lock Nut. 1 inch 16 thread. Used on 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981-9/1984), 3400, 231, 335, 531, 532, MAY ALSO FIT 600, 800, 601, 801, 2000-4000 4 Cylinder. (Item #: 172916, Ref: C5NN3707A) $8.70

MFWD Universal Joint - Used on APL axles 335, 325, 350, 345, 1351, 1551, this universal joint measures 34mm (1.339 inches) x 97mm (3.819 inches). Replaces OEM numbers ZP1927603, ZP1927831, 83934998, 81927603, 81927831, 81927603, ZP0501205340, 83956477, E3NN4635AA (Item #: 173025, Ref: E3NN4635AA) $143.28

O-Ring - O-Ring. For Power Steering Valve Assembly. 2000, 3000, 4000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU 1/1981-9/1984, 3400, 231, 335, 531, 532 Replaces 87150S94, 1751687M1. (Item #: 178148, Ref: 87150S94) $1.70

Power Steering Ball Joint Male - This Power Steering Ball Joint end measures 2.125 inches from the end of the threads to the center of the knuckle, and 5/8 diameter threads with 18 threads per inch. Cylinder end. For tractor models 2000, 230A, 231, 234, 2600, 3000, 334, 3400, 3600, 4000, 4410, 4600, 530A, 531, 532, 601, 801. (Item #: 161148, Ref: E2NN3A540BJ) $20.30

Power Steering Cylinder - Power Steering Cylinder with 5/8 inch diameter rod, 1/2 inch diameter threaded outer end. For 335, 3400, 4110, 532, 2000 Industrial, 4000 Industrial. Uses CAPN3300A Rod end. Replaces, C5NN3A739G, C5NN3C578B. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 127590, Ref: C5NN3A739G) $244.00

Power Steering Cylinder - This Power Steering Cylinder has 5/8 inch diameter rod, 7/16 inch diameter threaded end. Replaces original part numbers D4NN3A540A (right hand) and D4NN3A547A (left hand). Rod end ball joint sold separately as part number C5NN3A302B. Used on 2000, 2100, 2110, 2120 COMPACT TRACTOR, 2150, 230A, 231, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4600SU, 4610SU, 530A, 531, 532 SQUARE BALER, 601, 801. OEM numbers D4NN3A540A, D4NN3D574A, E9NN3A540AA. (Item #: 121885, Ref: D4NN3A540A) $230.00

Power Steering Cylinder Ball End - This Power Steering Cylinder end is used with C5NN3A739G. It fits a cylinder rod with 0.500 inch number 20 fine thread. (Item #: 104712, Ref: CAPN3300A) $19.10

Power Steering Pump - This Power Steering Pump replaces pumps with an internal Relief Valve (will not replace external relief valve. For 3500, 3550 5/1970 and up, 5100, 7100 7/1970 and up, 4100 4/1970 and up, 4600, 5600, 6600, 7600 5/1981 and up, 5610, 6610, 7610 4/1985 and up. Power Steering Pump with reservoir. Pressure relief valves set at 1100 PSI, 2.74 GPM. This pump can replace: 83949432, E6NN3K514DA. 2000, 3000 10/1968 and up, 2600, 3600, 4100, 2610, 3610, 4110 less cab, 83959550 - E6NN3K514CA. 4000 (10/1968-3/1970), 2600, 3600, 4110 with cab. Fits others replacing the following OEM numbers: D8NN3K514GA, D8NN3K514GB, D8NN3K514GC, E6NN3K514EA, 83917191, 83923736, 83924995, 83959533, 87759440, A709527 (Item #: 113209, Ref: E6NN3K514EA) $156.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $13.20

Power Steering Shaft and Ball Nut Assembly After 1964 - Fits 2000, 3000, 4000SU, 2600, 3600, 4100, 4600SU, (2310, 2610, 2910, 3610, 3910, 4110, 4610SU ALL UP TO 9/1984), INDUSTRIALS: 230A, 231, 234, 2110LCG, 334, 335, 3400, 4110LCG, (530A UP TO 9/1984), 531, 532. 26 9/16 inches long. (Item #: 161863, Ref: D6NN3A710A) $289.00

Power Steering Valve Assembly - For tractor models 2000, 3000, 4000SU, 2600, 3600, 3900, 4100, 4600SU, (2310, 2610, 2910, 3610, 4110, 4610SU >9/1984), 2110LCG, 3400, 230A, (231 > 9/1984), 334, 335, 530A, 531, 532. NOTE: If your old valve is 6 plunger, 3 springs, this is an improved version with 8 plungers and 4 springs. YOU MUST remove the check valve from old steering unit with a straight screwdriver and install in the new valve. (Item #: 178679, Ref: C5NN3A730B) $553.00

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.60

Seal, Lower - This is the Lower Seal used with D9NN3N748AA Adapter. Measures 1 3.4 inches outside diameter and 1 3/16 inches inside diameter. For models 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981-9/1984), 3400, 231, 335, 531, 532. Replaces 86531349, 81803245, C5NN3N739A. (Item #: 178159, Ref: C5NN3N739A) $17.00

Sector Shaft Seal - This Seal Measures 1.125 inches inside diameter, 1.442 inches outside diameter, and 0.200 wide. Verify size or OEM number before ordering. Many of these tractors used more than one size. The Sector Shaft (Pitman Arm) Seal is used on Ford tractors: 2000, 2110LCG, 231, 233, 2600, 3000, 333, 335, 3400, 3600, 3900, 4000, 4000SU, 4100, 4110LCG, 4600SU, 531, 532, 600, 601, 800, 801, 8N, Jubilee, NAA. Replaces 81803188, 8N3585, 8N3591, 8N3591A, 8N3591B, AT67782, C5NN3C615A, D5UZ3591A, D5UZ3591B, 1L6784, D9NN7R510B. (Item #: 124153, Ref: C5NN3C615A) $5.20

Spindle, LH - This spindle measures A= 9.812 inches, B= 1.50 inches, C= 1.937 inches, D= 1.794 inches, E= 1.124 inches. For tractor models 3000, 335, 3400, 3600, 4000, 4100, 4410, 4600, 532. Replaces F2NN3105AA. The wheel bearing kit used for this spindle is part number WBKFD7. (Item #: 104539, Ref: C5NN3106E) $299.00

Spindle, RH - This spindle measures A= 9.812 inches, B= 1.50 inches, C= 1.937 inches, D= 1.794 inches, E= 1.124 inches. For tractor models 3000, 335, 3400, 3600, 4000, 4100, 4410, 4600, 532. Replaces F2NN3105AA. The wheel bearing kit used for this spindle is part number WBKFD7. (Item #: 104538, Ref: C5NN3105F) $270.00

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.40

Steering Arm Dust Seal - This Steering Arm Dust Seal fits between the Steering Arm and the Spindle. It measures 1 7/8 Inches (48mm) Outside Diameter, 1 1/2 Inches (38mm) Inside Diameter, 1/4 Inches (6mm) Thick. Replaces 81802845, C0NN3A208A (Item #: 104573, Ref: C0NN3A208A) $4.00

Steering Box Drop Arm - This Steering Box Drop (Pitman) Arm is used on many Ford Agricultural and Industrial models built 1965 and later. It replaces original part numbers 81803156, C5NN3590F. Verify part numbers before ordering. (Item #: 165024, Ref: C5NN3590F) $39.00

Steering Gear Side Cover O-Ring - This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other some Ford Tractors 1953-and later. 2.500 inches inside diameter. x .139 inches thick. Replaces 8N3581B. 87073S94, 9636445 (Item #: 124504, Ref: 8N3581B) $1.30

Steering Sector Shaft - For both Manual or Power Steering Applications Single Gear containing five teeth. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 334, 3400, 3500, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4400, 4600SU, 4610SU, 530A, 531, 532, 3350. Replaces C5NN3N575A. (Item #: 116896, Ref: C7NN3N575A) $131.00

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476 (Item #: 124494, Ref: 8N3586) $2.20

Steering Shaft Bushing - Bushing assembly, upper consists of a rubber splined piece with a metal bushing. Fits many Ford Tractors 1965 and up, with manual and power steering. Replaces C5NN3517A, 81811803, 83903807, D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.10

Steering Shaft Repair Kit - Repair kit for Steering Shaft. Services shafts where upper oil seal has worn a groove into shaft causing oil to leak from upper housing. For 2-WD Models: 600, 640, 611, 621, 631, 641, 651, 671, 800, 840, 801, 811, 821, 831, 841, 851, 861, 871. 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140 (1965-1975); 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or without cab 1975-3/1976; without cab 4/1976-1981); 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (without cab 1981-9/1984). (Item #: 173253, Ref: SRK632AA) $48.60

Steering Shaft Seal - This Steering Shaft Seal is for 2-wheel drive models steering box with 2 arms. Goes in the base of the steering shaft. It measures 1.386 inch outside diameter, 0.866 inch inside diameter and 0.374 inch in width. Tractors: 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140, 4410 (1965-1975), 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or w/o cab, 1975-3/1976; w/o cab 4/1976-1981), 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (w/o cab 1981-9/1984). Replaces D5NN3N632A, E1NN3N632AA and 83929295. (Item #: 164336, Ref: E1NN3N632AA) $9.40

No
Picture
Steering Wheel Cap - Black Cap only fits 17 5/8 diameter steering wheels on models: (2000, 3000, 4000, 5000, 7000 1965-1975), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-1981), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2/90), (5610, 5900, 7610 1981-1991), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-1982), (3230, 3430, 3930, 4130, 4630 3/1990 and up), (4830, 5030 7/1990 and up), (5610S, 6610S, 7610S 1994 and up). (Item #: 152187, Ref: C7NN3655B) $5.70

Tie Rod - Tie Rod is 1.187 diameter rod, left hand, straight, drilled, 8 holes, 31 inches to center of post. For 4600, 532, 5610, 5700, 6610, 6700, 6710, 7410, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 3600. Replaces 83906922, 83929292, E1NN3280AA (Item #: 100688, Ref: E1NN3280AA) $48.40

Wheels

$Ford 532 Front Hub, Heavy Duty \ Industrial$
Front Hub, Heavy Duty / Industrial - Used on Heavy Duty and Industrial Front Ends. 3000, 4000 (4cyl, heavy duty front axle), 5100, 5110 (heavy duty axle), 5200, 5190, 5600 (10x16 tire), 5610 (heavy duty axle), 5700 (10x16 tire), 6600 (10x16 tire), 6610 (heavy duty axle), 6700 (10x16 tire), 6710 (heavy duty axle), 7100, 7200, 7410 (heavy duty axle), 7600 (10x16 tire), 7610 (heavy duty axle), 7700 (10x16 tire), 7710 (heavy duty axle), 8000, 8010, 9000, TW10, TW20, TW30, Industrial: 250C, 260C, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445D, 450, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 1801, 3400, 3500, 3550, 4400, 4500, 4410. It uses C5NN1107F studs, and WBKFD7 wheel bearing kit, not included. Replaces OEM part number 313020. Verify part number before ordering. (Item #: 100662, Ref: 313020) $66.00

Front Rim - Heavy Duty - Front Rim with weight holes. 5.5 inch x 16 inch, 3300 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot. For 7.5 inch x 16 inch tires. Additional $25 shipping due to size and weight. Replaces 82005056, 83960327, 83926073, 83954658, 81816955, E6NN1007BA, C7NN1007J, C9NN1007C, 83936990, D2NN1007N, D2NN1007R29Z, D2NN1007S, 83900159, C5NN1007A (Item #: 116854, Ref: FW55166) $70.00

Front Wheel Bearing Kit - Front Wheel Bearing. For tractor models 230, 230A, 2310, 234, 2610, 2610V, 2810, 2910, 3230, 334, 335, 3430, 3600, 3610, 3610V, 3910, 3910V, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 4190, 4200, 4600, 4600SU, 4610, 4610N, 4610SU, 4630, 4630N, 4830, 5030, 530, 530A, 532. Fits hub C9NN1104E. Contains one each: Bearing LM48548-BP, Cup LM48510-BP, Bearing LM11949-BP, Cup LM11910-BP, Seal 310195. FW94WS (Item #: 100655, Ref: EHPN1200C) $19.00

Rear Axle Stud - This Rear Axle Stud connects the rear axle to the wheel center disc. It is used with C5NN1120E nut. 3/4 inch x 2 5/16 inch 16 (UNF) Thread. Replaces C5NN1N118J, C5NN1N118H, 81815740, 81815607, 81815739 (Item #: 115382, Ref: C5NN1N118H) $3.50

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Replaces: 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369. (Item #: 184824, Ref: 350719KIT) $22.00

Wheel Nut - This Cone Wheel Nut is 3/4 - 16 Thread (UNF). It is used for the center disc to rear axle. It is used with C5NN1N118H Studs. Replaces 81816136, 81833776, C5NN1120E, D3NN1120B (Item #: 156987, Ref: C5NN1120E) $3.50

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Cooling System

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A) $1.04

Decals and Emblems

Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825) $15.87

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN) $20.60

Drive Train

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $6.70

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $98.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $19.10

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $13.90

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Pistons and Sleeves

No
Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK) $64.99

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $106.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $134.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $104.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $166.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $149.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Ford 532 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Ford 532 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ford 532 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Ford 532 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Ford 532 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Ford 532 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.30

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.40

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Gauges

Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC) $8.60

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Item #: 115051, Ref: NCA596B) $38.10

Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1/2 inch L hole center to hole center, 2 1/2 inch wide, 1 1/8 inch thick (drawbar fits lift between lift arms). (Item #: 103174, Ref: 9N5182) $44.30

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L) $20.40

Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R) $21.70

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD) $15.30

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C) $21.30

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $117.34

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $22.00

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $36.00

Coupler Hub Drive Kit - Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1/8 inch diameter, with four 1/4 inch holes and 1-15/16 inch spacing.The drive flange is 3/4 inch round bore with set screw 1/4 inch by 3/8 inch. (Item #: 112067, Ref: L601-14) $124.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $23.50

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $30.80

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $68.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.50

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $20.10

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $800.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $600.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $74.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $28.40

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $52.92

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $280.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $97.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.70

Lights

Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V) $51.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

No
Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670) $24.20

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A) $16.50

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Blue - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without Additional Handling & Oversize Fees Apply To This Item, tools, (Item #: 161190) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Brownish Medium Gray, 1 Quart - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184575, Ref: TP245QT) $50.00

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $67.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.90

No
Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL) $57.00

No
Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT) $23.30

No
Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP) $7.40

No
Picture
Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL) $82.00

No
Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP) $10.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP) $7.80

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL) $58.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT) $20.70

No
Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP) $8.90

No
Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT) $22.10

No
Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP) $8.30

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL) $91.00

No
Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT) $37.10

No
Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP) $10.40

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $53.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $79.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $67.80

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK) $42.60

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013) $35.20

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $127.00

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166) $94.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $63.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1) $18.00

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A) $111.00