Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


International Harvester / Farmall M Tractor Parts

[Categories]   [All Farmall Models]   [Print]  


Brakes
Farmall M Bonded Lined Brake Disc
Bonded Lined Brake Disc
- These Bonded Lined Brake Disc measure 6-1/2 inches x 3-1/2 inches and have 12 splines on center hub. For tractor models M and MV serial number 2942236 and up. MD and MDV serial number 285505 and up. Super M and MD; W6 serial number 45847 and up. WD6 serial number 45301 and up, Super W6 and WD6; 400, W400, 450, W450. Combines: 141 and 141 Hillside, 151 Hillside gas and LP, 181, 403, 503, 615, 715, to serial number 23000, 815. Cotton Pickers: 414, 416, 420, 422, 616. Replaces 357117R91, 368181R92, ABC453. PRICED EACH. If you order 1, you will receive 1 disc. (Item #: 105444, Ref: 1963810C2) $20.00

Farmall M Brake-Actuating Assembly
Brake-Actuating Assembly
- Fits tractor models 400, 450, M with serial number higher than 294226, (MD, MDV both with serial number 285505 and up), (MV with serial number 294226 and up), Super M, and Super MTA. (Item #: 105437, Ref: 366182R93) $256.00

Farmall M Brake Actuating Spring
Brake Actuating Spring
- Used with disc brakes. For tractor models (M from serial number 294226 and up), (MD from serial number 285505 and up), Super M, Super MTA, Super MV, Super MDV, Super W6, Super W6TA, Super WD6, OS6, ODS6, 400, 450, W400, W450, 560, 656, 660, 664, 666, 686, Hydro 70, Hydro 86. Replaces A30897, A41816. Replaces 357116R1, 619731C1, 72504717V. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105 inch. (Item #: 113798, Ref: A155624) $1.70

Farmall M Brake Band
Brake Band
- Fits: M (Up to SN: 294226), MD (up to SN: 285505), MDV, MV (up to SN: 294226), O6, ODS6, OS6, W6, WD6, I6. 58345DCX, 58345DCXAF (Item #: 105421, Ref: 58345DCX) $41.00

Farmall M Brake Disc Adjusting Bolt
Brake Disc Adjusting Bolt
- For International / Farmall tractor models M (s/n 294226-later), MD (s/n 285505 - later), Super M, Super MTA, Super W6, 400, 450, Replaces International OEM number 357040R1, 7/16"-20 UNF x 4-1/2", (Item #: 126208) $13.40

Farmall M Brake Drum, Used
Brake Drum, Used
- For International tractor model M (s/n 37367-later), Replaces International OEM number 8821DB, For a new version of this item use Item #: 105414, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435366) $86.01

Farmall M Brake Kit
Brake Kit
- For International / Farmall tractor models M, Super M, Super MTA, 400, 450, Compatible with International Combine (s) 403, 503, 615, 715, 815, Compatible with International Harvester (s) 414, 420, 616, 622, 782, 1400, Replaces International OEM number 121961, 830617, 619731, Kit Includes: (2) Brake Discs, (5) Steel Balls, and (3) Brake Springs, (Item #: 162746) $66.00

Farmall M Brake Pedal Return Spring
Brake Pedal Return Spring
- Used with band brakes. For tractor models (2544, 544 clutch pedal return), H, HV, M, MD, MDV, MV. 8-1/8 inch overall length. (Item #: 125749, Ref: 48599DA) $9.00

Farmall M Brake Pedal Shaft
Brake Pedal Shaft
- For tractor models (M, MV serial number 294226 and up with disc brakes), (MD, MDV serial number 285505 and up with disc brakes), Super M and MTA, W6, WD6, Super W6, 400, 450. Shaft, brake pedal. Does not include cotter key and two shaft keys. (Item #: 105411, Ref: 357046R1) $78.00

Farmall M Brake Pedal Shaft Seal
Brake Pedal Shaft Seal
- This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Item #: 153586, Ref: AB2578R) $14.80

Farmall M Brake Shaft
Brake Shaft
- The Brake Shaft is for tractors with Band Brakes. Fits: (M up to serial number 294225), (MD up to serial number 285504), (MDV up to serial number 285504), (MV up to serial number 294225). This shaft is 25.12 inches long with a 1.130 inch diameter. Replaces original part number 50079D. (Item #: 115108, Ref: 650079D) $69.00

Farmall M Clutch And Brake Pedal Shaft
Clutch And Brake Pedal Shaft
- For International / Farmall tractor models M, Super M, Super MTA, Super W6, W6, W400, W450 (all with Disc Brakes), 400, 450, Replaces International OEM number 357046R1, 24.75" Long, 1.13" Diameter, Bare Metal, (Item #: 115109) $78.00

Farmall M Disc Brake Ball Bearing
Disc Brake Ball Bearing
- Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00

Clutch
Farmall M Bearing, Clutch
Bearing, Clutch
- Clutch release bearings, 3.697 inch outside diameter, 2.249 inch inside diameter, .7970 inch wide bore. Tractors: M, MD, Super M, Super MD, W6, WD6. For M, MD, Super M, Super MD, W6, WD6. (Item #: 100013, Ref: 10A21384) $30.00

Farmall M Bearing - Pilot
Bearing - Pilot
- New Pilot Bearing. 25mm (.9843 inch) inside diameter, 52mm (2.0472 inch) outside diameter with seals on both sides. For tractors: 400, 450, 500, 560, 600, 660, H, HV, M, M500, MD, MDV, MV, Super H, Super M, Super MD, Super MTA, Super W4, Super W6, W4, W6, WD6. (Item #: 100023, Ref: ST544) $5.40

Farmall M CLUTCH ALIGNMENT TOOL
CLUTCH ALIGNMENT TOOL
- CASE/IH MODELS with 10 splines with 1 1/2 inch hub discs. (Item #: 118538, Ref: 1712-7072) $20.70

Farmall M Clutch Disc
Clutch Disc
- 12 inch, spring loaded, 1.500 inch spline diameter, 10 spline. For tractor models M, MD with serial number FBK294708 and above. Super M, Super MD. (Item #: 172395, Ref: 359168R91) $260.00

Farmall M Clutch Disc
Clutch Disc
- Fits M. 11 inch clutch disc replaces OEM number 52848, GV73340059, 14736D, 14736D-RO, 3JT9309-RO, 52848-RO, 52848DA-R6B. (Item #: 118487, Ref: 52848) $83.00

Farmall M Clutch Disc, 11in
Clutch Disc, 11in
- Organic, solid, 1.50 inch spline diameter, 10 spline. For tractor models M, MV, MD, MDV all with serial number between FBK501 and FBK294707. Super W6, WD6, W6. (Item #: 165971, Ref: 52848-RO) $106.00

Farmall M Clutch Disc, 11in
Clutch Disc, 11in
- Feramic, solid, 1.50 inch spline diameter, 10 spline. For tractor models M, MD, MV, MDV, all with serial number between FBK501 and FBK294707. Super W6, W6, WD6. (Item #: 118487, Ref: 52848-RF) $83.00

Farmall M Clutch Disc, 12in
Clutch Disc, 12in
- Organic, spring loaded, 1.500 inch spline diameter, 10 spline. For tractor models M, MD, MDV, MV all with serial number FBK294708 and above. Super M, Super MD. (Item #: 172395, Ref: 362013-RO) $260.00

Farmall M Clutch Disc, 12in
Clutch Disc, 12in
- Rockford Style 1.500 inch, 10 spline. For tractor models M, MD, MV, MDV all with serial number FBK294708 and above. Super M, Super MD. (Item #: 172395, Ref: 362013R91) $260.00

Farmall M Clutch Disc, Remanufactured
Clutch Disc, Remanufactured
- 12" 6 Button, 1.500", 10 spline. For tractor models M, MD with SN# FBK294708 and above. Super M, Super MD. (A refundable $20 core charge will be added to this part). (Item #: 206015, Ref: 359168-R4B) $175.50

Farmall M Clutch Disc, Remanufactured
Clutch Disc, Remanufactured
- For International / Farmall tractor models M, Super M, Super W6, Clutch Size: 12", Clutch Hub: 1-1/2", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, (Item #: 205052) $108.01

Farmall M Clutch Kit, 10 SPLINE DISC
Clutch Kit, 10 SPLINE DISC
- For Farmall M, MD, MDV, MV, W6. Kit contains 52848DA 11 inch clutch disc with 10 splines and 1 1/2 inch hub, 52840D 11 inch pressure plate with 9 springs and 3 fingers, ST544 pilot bearing, 48974D release bearing and Alignment tool. (Item #: 118486, Ref: 1712-7074) $246.00

No
Picture
Clutch Kit, Remanufactured
- For International / Farmall tractor models M, O6, W6, Clutch Diameter - 11", Clutch Hub Diameter - 1-1/2", Clutch Splines - 10, Clutch Center - Solid, Clutch Type - Woven, Pressure Plate Size - 11", Pressure Plate Levers - 3, Pressure Plate Springs - 9, Pressure Plate Type - Single Stage, For a New version of this sku use Item #: 100023, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202018) $246.01

Farmall M Clutch Pedal Return Spring
Clutch Pedal Return Spring
- This Clutch Pedal Return Spring is 6 inches total length. It fits H, HV, M, MD, O6, ODS6, OS4, OS6, Super H, Super HV, (Super M, Super MD both up to serial number 60000), Super MTA, W4, W6, W6TA, WD6; Replaces: 49444DA. (Item #: 126155, Ref: 49444DA) $19.00

Farmall M Clutch Release Bearing Carrier
Clutch Release Bearing Carrier
- This Release Bearing Carrier is used on Farmall M, MD, MDV, MV, Super M, Super MTA. Uses 6182379R91 Release Bearing (not included). (Item #: 172968, Ref: 6932D) $86.00

Farmall M Clutch Release Fork, Used
Clutch Release Fork, Used
- For International tractor models M, MD, Super M, Super MTA, 400, 450, 560, 660, Replaces International OEM nos 5800DB, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497006) $77.01

Farmall M Clutch Release Sleeve Carrier
Clutch Release Sleeve Carrier
- For model M, Super M, SUper MTA. (Item #: 109387, Ref: 6758D) $93.00

Farmall M Pressure Plate
Pressure Plate
- 11 inch Rockford Style. For tractor models M, MD, MV, MDV all with serial number between FBK501 and FBK294707. Super W6, W6, WD6. (Item #: 118501, Ref: 52840D) $149.00

No
Picture
Pressure Plate
- This pressure plate is 12 inches, 3 lever and 12 spring. For Models (M, MD, MDV, MV all after serial number FBK294707), Super M prior to serial number 60000, Super MD, Super MTA prior to serial number 60000, W9, Farmall 450. Replace part numbers 360079R and 360079RN. (Item #: 192515, Ref: 357299R95) $374.00

Farmall M Pressure Plate Assembly, Remanufactured, 52840D
Pressure Plate Assembly, Remanufactured, 52840D
- For International / Farmall tractor models M (s/n FBK501 - FBK294707), MD (s/n FBK501 - FBK294707), O6 (s/n FBK501 - FBK294707), W6 (s/n FBK501 - FBK294707), Compatible with International Construction and industrial models T6, TD6, TD9, Compatible with Minneapolis Moline tractor models Z, Replaces OEM number 52840D, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 118501, (Item #: 204195) $111.01

Farmall M Pressure Plate, Remanufactured
Pressure Plate, Remanufactured
- For International / Farmall tractor models M, Super M, Super W6, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206086) $160.22

Cooling System
Farmall M Fan
Fan
- This four blade fan is for M, Super M, MD, Super MD, Super MTA. Replaces 20307DX, 353727R92 (Item #: 100769, Ref: 353727R92) $57.00

Farmall M Fan Belt
Fan Belt
- This Fan Belt measures 7/8 x 45 7/8 inches. For C248, C264, and C281 gas engines and C248 diesel in: 400, 450, 6, B450, M, MD, ODS6, Super M, Super MD, Super W6, Super WD6, W400, W450, WD6. Please verify measurements before ordering (Item #: 108776, Ref: 16131DA) $18.80

Farmall M Radiator
Radiator
- Made of copper and has a hole in radiator for the steering shaft. For tractor models M, Super M, MD, Super MD, MTA, Super MTA, W6, Super W6, WD6. Note: If replacing a NON-pressure radiator, you will have to replace the temperature gauge with part number 67135D. (gauge NOT supplied). Weight 36 pounds. Replaces 352629R92. For radiator cap order part number 67448DD. (Item #: 101709, Ref: 351798R92) $497.15

No
Picture
Radiator
- For International / Farmall tractor models M, Super M, Replaces International OEM number 357339R91, 357158R92, Overall Height: 27-1/4", Overall Width: 20", Core Height: 21-3/4", Core Width: 18-3/4", Depth: 2-11/16", Rows: 4, Fins Per Inch: 8, Fill Neck Height: 3/4", Inlet: 2", Outlet: 2", For 3 row version use Item #: 101709, Additional Handling and Oversize Fees Apply To This Item, (Item #: 152357) $650.00

Farmall M Radiator Cap
Radiator Cap
- Fits Super A, Super C, Super H, M, MD, Super M, MD, 4, Super W4, O6, W6, ODS6, Super W6 and WD6, W9, WD9, Super W9 and WD9. Not for short filler neck. (Item #: 112290, Ref: 67448DD) $3.98

Farmall M Radiator Cap With Lever
Radiator Cap With Lever
- Pressure cap with lever. For C, H, M, MD, O6, ODS6, Super C, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9, Super A, W4, W6, W9, WD9 (Item #: 110150, Ref: 67448DDWL) $17.00

Farmall M Radiator Hose Kit
Radiator Hose Kit
- Radiator hose kit for tractors: M serial number 109445 and up, Super M, 400 and 450 diesel. Hoses (1) 2-1/8 inch inside diameter x 4 inch length, (1) 2 inch inside diameter x 2-3/4 inch length, (2) 1-1/2 inch inside diameter x 2-3/8 inch length. For 815, 966. (Item #: 178071, Ref: RHKM400) $22.90

Farmall M Thermostat
Thermostat
- This 160 degree Long Neck Thermostat. Fits the following tractor models: H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 Gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, and 706 Diesel. It does not come with a gasket. Replaces part numbers 313942R91, 313942R92, 315838R91, 317668R91, 37634DA, 261514R92. (Item #: 110010, Ref: R1852) $39.00

Farmall M Tower Hose Clamp 1.815 inch to 2.000 inch
Tower Hose Clamp 1.815" to 2.000"
- For International / Farmall tractor models H, I4, I6, M (Early), O4, O6, OS6, Super H, Super M, W4, W6, 300, 350, Compatible with John Deere tractor models 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4020, 4025, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8020, 8430, 8630, Replaces OEM number 55624D, (Item #: 130438) $7.50

Farmall M Water Block Drain Plug, Winged
Water Block Drain Plug, Winged
- Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub Lo-Boy. (Item #: 178066, Ref: 45314DC) $12.70

Farmall M Water Jacket Cover
Water Jacket Cover
- For tractor models 400, 450, M, Super M, Super MTA. Gasket available separately as 46128DB. (Item #: 110532, Ref: 46125DA) $42.90

Farmall M Water Pump, Assembly
Water Pump, Assembly
- For tractor models 400, 450, M, MD, Super M, Super MTA. Crawlers: T6, TD6. (Item #: 107092, Ref: 353729R92) $195.00

Farmall M Water Pump Gasket
Water Pump Gasket
- For International / Farmall tractor models M, Super M, Super MTA, W6, 400, 450, Replaces International OEM number 45981DA, (Item #: 154670) $2.98

Farmall M Water Pump Pulley Flange
Water Pump Pulley Flange
- Flange only. For tractor models M, MD, 400, 450. (Item #: 108977, Ref: 2370DBX) $36.00

No
Picture
Water Pump, Remanufactured, 353729R92, 6345D
- For International / Farmall tractor models M, O6, Super M, Super MTA, W6, 400, 450, Replaces International OEM number 353729R92, 353729R92-R, SW01971, Replaces International Casting number 6345D, 353729, Includes mounting gasket, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204182) $270.01

Farmall M Water Temp Gauge
Water Temp Gauge
- 19 Lead - with IHC Logo For H, M, W-4, W-6, W-9 R3695 (Item #: 102128, Ref: 63783D) $40.00

Farmall M Water Temp Gauge
Water Temp Gauge
- 19 Lead - with IH Logo For H, Super H, M, Super M, Super MTA, W-4, Super W4, W-6, Super W6, W-9 (Item #: 111254, Ref: R2742) $66.64

Decals and Emblems
Farmall M Decal Set
Decal Set
- For model M with McCormick-Deering. 1939-1944. (Item #: 110848, Ref: IHCMDM) $37.20

Farmall M Decal Set
Decal Set
- This RARE decal set has 14 vinyl cut self adhesive stickers for a 1947 M with Mccormick-Deering lettering. (Item #: 100899, Ref: XDIHMDM) $97.00

Farmall M Decal Set
Decal Set
- For model M. This is a set of 13 self adhesive decals. These are printed on Mylar, not die cut. 1945-1952. (Item #: 101040, Ref: IHCM) $36.10

Farmall M Hood Emblem
Hood Emblem
- Hood Emblem measures 2 inches tall and and 12 inches long straight across the back (13 inches with the bend). For H, HV, M, MV, MD, MDV. Bright Metal Farmall logo. (Item #: 103908, Ref: 49404D) $19.20

Farmall M IH Decal, 1-5\8 inch, Vinyl
IH Decal, 1-5/8", Vinyl
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1 5/8", no background, (Item #: 101024) $2.80

Farmall M IH Decal, 1 inch, Vinyl
IH Decal, 1", Vinyl
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1", no background, (Item #: 101023) $1.90

Farmall M IH Decal, 3 inch x 3-1\2 inch, Vinyl
IH Decal, 3" x 3-1/2", Vinyl
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 3" x 3-1/2", No background, (Item #: 101025) $11.20

Farmall M IH Decal, 4-1\2 inch x 5 inch
IH Decal, 4-1/2" x 5"
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 4-1/2" x 5", Mylar decal, (Item #: 101095) $5.60

Farmall M International Decal, 17 inch, Mylar
International Decal, 17", Mylar
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 17" long, Black, Mylar decal, (Item #: 101105) $5.60

Farmall M International Decal, 8-1\2 inch, Mylar
International Decal, 8-1/2", Mylar
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 8 1/2" long, Black, Mylar decal, (Item #: 101104) $3.80

Farmall M International Decal Serial Number Tag - Later Style
International Decal Serial Number Tag - Later Style
- For International / Farmall tractor models C (1950 and up), Cub, H, M, Super A (1950 and up), Super A, Super C, Super H, Super M, Super MTA, Model number IHS289B, (Item #: 168699) $24.90

Farmall M International Decal Set,10 inch IH Logo, Vinyl
International Decal Set,10" IH Logo, Vinyl
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 10", (Item #: 101022) $29.70

Farmall M International Decal Set, 1 1\4 inch IH Logo, Vinyl
International Decal Set, 1 1/4" IH Logo, Vinyl
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-1/4", (Item #: 101018) $2.80

Farmall M International Decal Set, 1 3\4 inchx 1 5\8 inch IH Logo, Vinyl
International Decal Set, 1 3/4"x 1 5/8" IH Logo, Vinyl
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-3/4", (Item #: 101019) $3.80

No
Picture
International Decal Set, 6 1/2"x 7" Shaded IH Logo, Vinyl
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo 7", Vinyl Cut, Shaded Outline, (Item #: 101020) $16.80

No
Picture
International Decal Set, 7 1/4"x 8" Shaded IH Logo, Vinyl
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 8", (Item #: 101021) $22.30

Farmall M International Harvester Decal, 2-3\4 inch x 3 inch
International Harvester Decal, 2-3/4" x 3"
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, (Item #: 101093) $3.80

Farmall M International Harvester Decal, 2 inch x 2-1\2 inch, Mylar
International Harvester Decal, 2" x 2-1/2", Mylar
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/2", No background, Mylar decal, (Item #: 101097) $3.80

Farmall M International Harvester Decal, 2 inch x 2-1\4 inch, Mylar
International Harvester Decal, 2" x 2-1/4", Mylar
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/4", Mylar decal, (Item #: 101092) $3.80

Farmall M International Harvester Decal, 5-1\2 inch x 6 inch, Mylar
International Harvester Decal, 5-1/2" x 6", Mylar
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 5-1/2" x 6", Mylar decal, (Item #: 101096) $5.60

Farmall M International Harvester Decal, 5-1\2 inch x 6 inch, Mylar
International Harvester Decal, 5-1/2" x 6", Mylar
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 5-1/2" x 6", No background, Mylar decal, (Item #: 101098) $5.60

Farmall M International Harvester Decal, 5 inch Mylar
International Harvester Decal, 5" Mylar
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 5" diameter, Shaded outline, Mylar decal, (Item #: 101099) $5.60

Farmall M International Harvester Decal, 6 inch Mylar
International Harvester Decal, 6" Mylar
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 6" diameter, Shaded outline, Mylar decal, (Item #: 101100) $7.50

Farmall M International Harvester Decal, 7-1\2 inch, Mylar
International Harvester Decal, 7-1/2", Mylar
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 7 1/2" diameter, Shaded outline, Mylar decal, (Item #: 101101) $9.30

Farmall M International Harvester Decal, 9 inch, Mylar
International Harvester Decal, 9", Mylar
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 9" diameter, Shaded outline, Mylar decal, (Item #: 101102) $11.20

Farmall M International Hood Decal, 23-1\2 inch, Vinyl
International Hood Decal, 23-1/2", Vinyl
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, Size: 23-1/2", Black lettering, (Item #: 101031) $14.90

Farmall M International McCormick-Deering Farmall Decal Set, MD, Vinyl
International McCormick-Deering Farmall Decal Set, MD, Vinyl
- For International / Farmall tractor model M, (Item #: 100900) $123.00

Farmall M International McCormick Farmall Decal Set, MD Diesel 1945-52, Vinyl
International McCormick Farmall Decal Set, MD Diesel 1945-52, Vinyl
- For International / Farmall tractor model M, Mylar decal set use Item #: 101041, (Item #: 100912) $123.00

Farmall M International McCormick Farmall Decal Set, M, Vinyl
International McCormick Farmall Decal Set, M, Vinyl
- For International / Farmall tractor model M, For mylar decal set use Item #: 101040, (Item #: 100911) $90.00

Farmall M International McCormick Farmall Decal Set, MV, Vinyl
International McCormick Farmall Decal Set, MV, Vinyl
- For International / Farmall tractor model M, Mylar decal set use Item #: 101042, (Item #: 100913) $116.00

No
Picture
International MV Decal Set, Farmall, McCormick, Mylar
- For International / Farmall tractor model M, Vinyl decal set use Item #: 100913, (Item #: 101042) $60.00

Farmall M McCormick International Decal, 10 inch Vinyl
McCormick International Decal, 10" Vinyl
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 10" long, Black and white, Vinyl decal, (Item #: 101103) $9.30

Farmall M McCormick International Decal, Hood, White\Black, 7-1\4 inch, Vinyl
McCormick International Decal, Hood, White/Black, 7-1/4", Vinyl
- For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 7-1/4" black and white, Vinyl decal, (Item #: 101026) $7.50

Farmall M Toolbox Decal
Toolbox Decal
- For tractor models H, M, MD, Super H, Super M, Super MD, Super MTA. (Item #: 183184, Ref: R0678) $7.10

Drive Train
Farmall M 3RD and 4TH Drive Gear
3RD and 4TH Drive Gear
- 26 and 29 teeth. For M, MD. (Item #: 110914, Ref: 56530DA) $144.00

Farmall M 4TH and 5TH Sliding Gear
4TH and 5TH Sliding Gear
- 20 and 34 Teeth. M, MD, MDV, MV. Replaces: 51576D, 56535DA (Item #: 109849, Ref: 56535DA) $153.00

Farmall M Axle Seal, Rear
Axle Seal, Rear
- For 2-3/4 inch axles (inside diameter 2-3/4 inch, outside diameter 3-5/8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3/4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Item #: 172589, Ref: 377788R1) $16.10

Farmall M Bearing
Bearing
- Tractors, Implements. Ball bearing, has many applications including water pump bearing on tractors: M, MD, Super M, Super MD, W6, WD6, 06, ODS6, Super W6, Super WD6, W9, WD9, Super WD9, 400, W400, 450, W450. For 400, 450, 5088, 5288, 5488, M, MD, O6, ODS6, Super M, Super MD, Super W6, Super WD6, Super WD9, W400, W450, W6, W9, WD6, WD9. Replaces ST205A (Item #: 178129, Ref: E75GE9) $7.00

No
Picture
Fourth and Fifth Gear
- Fourth and Fifth Sliding Gear. For M, MD. 20 and 34 teeth. (0130R) (Item #: 109849, Ref: 56535DA) $153.00

Farmall M Gear Shift Boot
Gear Shift Boot
- Some of the Farmall / International tractors were not factory equipped with a gear shift boot, and it was sold as an extra. This boot is used on models: H, M, 560, I4, I6, ID6, Super MVTA, 2606, HV, MD, T340, T5, MDV, MV, TD6, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MTA, Super MV, Super W4, Super W6, Super WD6, W4, W6, WD6, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 606, 660, B275, 354, 384. It measures 4-3/4 inches tall, 11/16 inch top hole inside diameter and 2-3/4 inches bottom hole. (Item #: 182890, Ref: 64603DA) $26.50

Farmall M Gear Shift Knob
Gear Shift Knob
- For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.90

Farmall M Oil Seal
Oil Seal
- Fits: [A, A-I, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 2404, 404 (Top Transmission Shaft Front Seal)], [B-250, B-275, B-276, B-414, 2300, 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444 (Bull Pinion Shaft Bearing Retainer Seal)], [Cub, Cub Lo-Boy, 154, 184, 185 (Final Drive Upper Pinion Shaft Seal)], [M, MD, MDV, MV (Transmission Counter Shaft Front Seal)], MTA (Front Wheel Seal; with single front 900 x 10 wheel), [O4, OS4 (PTO Output Shaft Seal; serial number 2159 to 9300)], [Super M, Super MD, Super MDV, Super MV (Transmission Counter Shaft Front Seal; up to serial number F52627 and up to seril number L51241)], W4 (PTO Output Shaft Seal; serial number 786 to 9300). Replaces: 21969D, 264694R91, 287440R91, 3043788R91, 3043788R92, 358765R91, 358784R91, 358808R91, 358823R91, 381907R91, 42177D, 43278D, 50839D, 530969R91, 703907R91, 703908R92, A29424. (Item #: 178204, Ref: 381907R91) $6.00

Farmall M Rear Saddle
Rear Saddle
- When using this rear saddle a wide front can be installed. For tractor models M, MD, MTA, Super M, 450, Farmall 400. (Item #: 110604, Ref: 360406R1) $209.00

Farmall M Reverse Idler Gear Bushing
Reverse Idler Gear Bushing
- This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a reverse idler gear bushing: 400, 450, 560, 660, B-450, BM, BMD, M, MD, MDV, MTA, MV, O6, ODS6, SBM, SBMD, Super M, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W6, Super WD6, W400, W450, W6, W6TA, WD6, WD6TA; Replaces: 48841D (Item #: 109669, Ref: 48841D) $13.50

Farmall M Shift Lever Repair Pin Kit
Shift Lever Repair Pin Kit
- For International / Farmall tractor models B250, B275, B276, B414, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, W4, W6, W400, W450, WD6, WD9, 300, 330, 340, 350, 354, 364, 384, 400, 424, 434, 444, 450, 460, 504, 560, 606, 660, 2300, Replaces International OEM number 256918R1, 172529, 256919R1, 259918R11, 310662R11, 310664R11, 34878D, 357003R1, 40465DA, 40466DA, 705650R1, (Item #: 167881) $24.50

No
Picture
Third and Fourth Drive Gear
- For M, MD. 26 and 29 teeth. (TIS, 0128R) (Item #: 110914, Ref: 56530DA) $144.00

Farmall M Transmission Drive Shaft
Transmission Drive Shaft
- For M, MD. 20 and 39 teeth. (0126R) (Item #: 110916, Ref: 52089DD) $239.58

Electrical System
Farmall M 12 Volt Conversion Kit
12 Volt Conversion Kit
- Includes alternator, 12 volt resistor, brackets and instructions. For models H, Super H and M. Will not work if you have a magneto. THIS KIT WILL FIT UNDER ORIGINAL HOOD WITHOUT MODIFICATION TO HOOD. (Item #: 185277, Ref: IHCALTH) $244.00

Farmall M 12 Volt Conversion Kit
12 Volt Conversion Kit
- For M, Super M. Kit includes alternator with built-in regulator, Pulley, 12 volt resistor, wiring harness, brackets and instructions. Will not work if you have a magneto. THIS KIT USES A LARGER ALTERNATOR THAN THE IHCALTH KIT. IT WILL NOT FIT UNDER HOOD WITHOUT CUTTING HOOD. (Item #: 107099, Ref: IHCALTM) $245.84

No
Picture
Alternator - Delco Style (12453)
- For International / Farmall tractor models M, Super M (both less tachometer), Replaces Delco Remy manufacturer number 10459509, Replaces manufacturer number ADR0163, 400-12453, 7127-SE, Voltage: 12, Regulator: Internal, Amperage: 63 Self Exciting, Clock Position: 12, 1-Wire System, (Item #: 164230) $118.00

No
Picture
Alternator Mounting Bracket
- For International / Farmall tractor models M, Super M, Steel, 9.7mm Thick, (2) 10.7mm Unthreaded Holes, (1) 9mm Unthreaded Hole, (2) 10.2mm Unthreaded Holes, (Item #: 164226) $14.98

Farmall M Battery Box and Lid
Battery Box and Lid
- For International / Farmall tractor models M (s/n 28174-earlier), MD (s/n 28174-earlier), Super M (s/n 28174-earlier), Super M, W6, Replaces International OEM number 51707D, 51713DB, Restoration Quality, Inside Dimensions: 7-3/16" W x 9-1/8" T x 11-3/4" L, Mounts under the gas tank, Lid includes metal retainers and rubber bushings installed, Comes primered (color may vary). Prior to painting check fitment, (Item #: 112489) $110.00

Farmall M Battery Box Grommet
Battery Box Grommet
- For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, H, I4, I6, I9, M, MD, O4, O6, Super H, Super M, Super MTA, Super W4, W4, W6, W9, 300, 350, 400, 450, Replaces International OEM number 248-1146, 24179D, 52118D, (Item #: 126446) $2.50

Farmall M Battery Box Support Lock Bolt
Battery Box Support Lock Bolt
- For International / Farmall tractor models M, MD, Super M, Replaces International OEM number 51712D, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126451) $6.50

Farmall M Coil, Original, 12 Volt
Coil, Original, 12 Volt
- OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. This is an International Harvester OEM style 12 volt distributor coil. This distributor coil has a 2.8 ohm rating between the two primary winding terminals. Requires an external resistor. (Item #: 154651, Ref: 353875R91) $65.00

Farmall M Coil, Original, 6 Volt
Coil, Original, 6 Volt
- OEM style coil. Measures overall length of 5 3/8 inches, Diameter at widest point of center ridge is 2 1/4 inches. This distributor coil has a 1.4 ohm rating between the two primary winding terminals. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Item #: 154650, Ref: 353874R91) $66.00

Farmall M Distributor
Distributor
- Original IHC design comes with a 32 tooth drive gear. For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. R6332 (Item #: 124839, Ref: 107304C91) $120.00

Farmall M Distributor
Distributor
- New and complete distributor comes with a 32 tooth gear, and is for tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA and other IH equipment with International Distributors. Replaces: 107296C91, 107299C91, 107302C91, 107304C91, 353890R91, Distributor Housing Casting Number: 353898R11, 354900R91, 357935R91, 362473R91, 362722R91, 364653R91, 364696R92, 366928R91, 372712R91, 380622R91. Uses IH points (included). (Item #: 124839, Ref: 107304C91) $120.00

Farmall M Distributor Breaker Plate
Distributor Breaker Plate
- Used on International Distributors, this plate is where points are secured. Points not included. Four Cylinder Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Replaces 352277R11 (Item #: 190142, Ref: 352277R11) $24.90

Farmall M Distributor Cap
Distributor Cap
- Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. Replaces 811735 Delco and 1750411M1. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Item #: 104554, Ref: 1750411M91) $8.50

Farmall M Distributor Cap
Distributor Cap
- 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Item #: 105571, Ref: 351693R92) $9.20

Farmall M Distributor Cap Spring Clip
Distributor Cap Spring Clip
- Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1 (Item #: 178117, Ref: 353894R1) $16.80

Farmall M Distributor Condenser
Distributor Condenser
- Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Item #: 111108, Ref: 353903R1) $7.70

Farmall M Distributor Drive Housing
Distributor Drive Housing
- This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Item #: 178938, Ref: 363749R91) $108.00

Farmall M Distributor Drive Housing, Used
Distributor Drive Housing, Used
- For International tractor models C, M, MD, MTA, Super A, Super C, 200, 230, 240, 300, 330, 340, 350, 400, 424, 450, 504, 2404, 2424, 2504, Replaces International OEM number 363763R11, With Tachometer Drive Hole, For a new version of this item use Item #: 178938, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429775) $65.01

Farmall M Distributor Drive Shaft
Distributor Drive Shaft
- Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Item #: 110682, Ref: 353934R11) $17.80

Farmall M Distributor Dust Cover
Distributor Dust Cover
- Fits early Delco Distributor with Clip Held Cap. For tractor models (A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super HV, M, MV, Super MV, MTA. All with Delco Vertical Conversion Distributor 1111411). (Item #: 103153, Ref: 1900119) $9.00

Farmall M Distributor Dust Cover
Distributor Dust Cover
- Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10

Farmall M Distributor Gear
Distributor Gear
- This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Item #: 111179, Ref: 353902R1) $29.00

Farmall M Distributor Hold Down Clamp
Distributor Hold Down Clamp
- For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $9.20

Farmall M Distributor Point Set
Distributor Point Set
- For J-4 Magneto and IH 353898R1 Distributor. Point Gap = 0.013 inches. Replaces 21A161, 407018R91, 353172R1, 353172R91. (Item #: 111109, Ref: 353172R1) $7.00

Farmall M Distributor, Rebuilt
Distributor, Rebuilt
- Complete remanufactured distributor for Farmall Cub, A, B, C, Super A, H, M, Super H, Super M, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504 tractors with IH distributor with 353898R1 housing casting number. IH original part numbers 353890R91, 107304C91. A refundable $50.00 core charge will be added to your order. (Item #: 203587, Ref: 353898R1) $235.01

Farmall M Distributor Rotor
Distributor Rotor
- For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 110266, Ref: 353896R1) $4.40

Farmall M Distributor Shaft Bushing and Shim Kit
Distributor Shaft Bushing and Shim Kit
- Delco Distributor Shaft Bushing and Shim Kit. Fits A, A-I, A1, AV, AV-1, B, BN, C, H, HV, I4, I6, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, T6, U2, U2A, U4, U6, W4, W6 all with Delco vertical conversion distributor 1111411. Replaces: washer: 811913, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Item #: 178103, Ref: ABC3007) $29.50

Farmall M Distributor Terminal Insulator Assembly, Delco
Distributor Terminal Insulator Assembly, Delco
- This Delco Distributor Terminal Insulator Assembly is for Round Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.345 inch diameter round hole. If not sure, measure before ordering. Used on Some of the following, using Delco 1111411 vertical distributor with round insulating terminal: I4, I6, T6, A, AV, B, BN, C, H, HV, M, MV, O4, O6, Super C, Super H, Super M, Super MV, W4, W6 (Item #: 111459, Ref: 1878405ASSY) $15.00

Farmall M Distributor Terminal Insulator Assembly, Delco
Distributor Terminal Insulator Assembly, Delco
- This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Farmall / IH with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. This if for vertical Delco Distributors. Not for IH Distributors or Magnetos. Replaces: 120622, 817363, 1914142, 1914144, 1916805, 1916806 (Item #: 111468, Ref: 1904376) $14.40

Farmall M Distributor Terminal Screw
Distributor Terminal Screw
- Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.70

Farmall M Distributor Terminal Screw Insulator
Distributor Terminal Screw Insulator
- Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20

Farmall M Distributor with base and tach drive, Remanufactured
Distributor with base and tach drive, Remanufactured
- For International / Farmall tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 2504, With tachometer drive and with base, Includes new distributor cap, points, condenser, 6V coil, and all other parts needed for a thorough rebuilt unit, (Item #: 203589) $350.01

Farmall M Distributor with base and tach drive, Used
Distributor with base and tach drive, Used
- For International tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 2504, With tachometer drive and with base, Includes new distributor cap, points, condenser., Does Not Include Coil, For a Remanufactured version of this part use Item #: 203589, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403589) $291.01

Farmall M Distributor with base less tach drive, Remanufactured
Distributor with base less tach drive, Remanufactured
- For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2404, 2424, 2444, 2504, 3444, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models T6, T340, 500, Without tachometer drive and with base, Includes new distributor cap, points, condenser, 6V Coil, and all other parts needed for a thorough rebuilt unit, (Item #: 203588) $235.01

Farmall M Distributor with Electronic Ignition
Distributor with Electronic Ignition
- New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 6 VOLT POSITIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. (Item #: 113311, Ref: 107304C91-6V) $655.78

Farmall M Distributor with Electronic Ignition - 12V
Distributor with Electronic Ignition - 12V
- New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 12 VOLT NEGATIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Note: This distributor has a maximum advance of 21 degrees. Some applications require an advance up to 40 degrees. Verify with your service manual this distributor will work for your application. (Item #: 113361, Ref: 107304C91-12V) $674.02

Farmall M Electronic Ignition Conversion Kit
Electronic Ignition Conversion Kit
- Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Item #: 105084, Ref: 1442P6) $195.00

Farmall M Electronic Ignition Conversion Kit
Electronic Ignition Conversion Kit
- Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve Ground System only. (FOR NEGATIVE GROUND order part number 1442). Use with distributor number 357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. (Item #: 105085, Ref: 1442P12) $174.00

Farmall M Electronic Ignition Conversion Kit - 12v Negative Ground
Electronic Ignition Conversion Kit - 12v Negative Ground
- For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system only. Distributors with clip type cap. (Item #: 105071, Ref: 1142) $155.00

Farmall M Electronic Ignition Conversion Kit - 12V Negative Ground
Electronic Ignition Conversion Kit - 12V Negative Ground
- Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Item #: 105083, Ref: 1442) $164.00

Farmall M Electronic Ignition Conversion Kit - 12v Positive Ground
Electronic Ignition Conversion Kit - 12v Positive Ground
- For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368 or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system only. (Item #: 108148, Ref: 1142P12) $177.00

Farmall M Electronic Ignition Conversion Kit, 6v Positive Ground
Electronic Ignition Conversion Kit, 6v Positive Ground
- For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with Delco distributor part no. 1885368 with clip type cap. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 6 volt positive ground system only. (Item #: 105072, Ref: 1142P6) $160.00

Farmall M Fuse Housing
Fuse Housing
- Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $10.90

Farmall M Generator Belt
Generator Belt
- Generator belt, fits engines : C248, C264, and C281. For tractor models: M, 6, Super M, Super W6, 400, W400, 450, W450. For 400, 450, 6, M, Super M, Super W6, W400, W450 (Item #: 111156, Ref: 49341D) $11.90

No
Picture
Generator - Delco Style (9718), Remanufactured, Delco Remy, 1100501
- For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, I9, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, Compatible with International Combine (s) 101, 140, 151, Compatible with International Construction and industrial models T6, Compatible with International Baler (s) 37, 47, 57, Replaces Delco Remy manufacturer number 1100501, Replaces manufacturer number 9718, 340-21, 92-01-3050, Delco Style, Voltage: 6, Rotation: Clockwise, Amperage: 25, Regulator: External, (Item #: 203178) $408.38

Farmall M Generator Pulley
Generator Pulley
- This 2 piece adjustable pulley is used on gas or LP; with generator #'s 1101355, 1101423, 1100501, 1100997. The pulley measures 4.129 inch Diameter. Made with ductile iron. Includes set screw and lock nut. Used on: H, M, I4, I6, I9, HV, MV, W6TA, W9, O4, WR9, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, W4, W6, WR9S, 300 (Farmall) up to SN 11002, 300 (Industrial) up to SN 2689, 400 (Farmall) up to SN 13458, 600, 650. Replaces 6745D, 6745DA, 6746D, 6746DA (Item #: 125677, Ref: 6745D) $53.57

Farmall M Generator to Alternator Bracket Set
Generator to Alternator Bracket Set
- For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, For converting from generator to alternator, (Item #: 113517) $61.00

Farmall M H4 Magneto Pinion Driven Gear
H4 Magneto Pinion Driven Gear
- This gear has 24 teeth and measures: 0.380 inch inside diameter, 0.759 inch outside diameter, 1.075 inch gear outside diameter, 0.952 inch overall height. It is used on H4 Magnetos. (Item #: 183878, Ref: 49420DX) $26.20

Farmall M Ignition Switch
Ignition Switch
- For the following Models using a magneto: Cub, Cub Lo-Boy, A, B, C, H, M, 100, 130, 140, 200, 230, 300, 350, 400. NOT like original. (Item #: 111178, Ref: 54207DB) $13.40

Farmall M Ignition Switch
Ignition Switch
- 2 terminal. For the following Models using a distributor: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, (140 6 volt), 200, 230. NOT like original. (Item #: 111177, Ref: 62801DC) $10.30

Farmall M Ignition Switch
Ignition Switch
- This Ignition Switch is for Distributor Ignition Systems. This is a 2 terminal switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230 (Item #: 117579, Ref: R2720) $39.00

Farmall M Ignition Switch
Ignition Switch
- This Ignition Switch is for Magneto Ignition systems. This switch has only 1 terminal. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub. Replaces 54207DB (Item #: 117580, Ref: R2721) $49.00

Farmall M Ignition Tune-up Kit, Basic, Delco Clip Held Cap
Ignition Tune-up Kit, Basic, Delco Clip Held Cap
- Ignition kit For Delco ONLY distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414, I4, I6, MTA, MV, O4, O6, T6, U2, W4, W6. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. Not for IH Distributors. (Item #: 103151, Ref: ATK1DCR) $9.50

Farmall M Lighting Switch Dimmer Resistor
Lighting Switch Dimmer Resistor
- For International / Farmall tractor models A, B, Cub, H, HV, M, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, TD6, TD9, W4, W6, W9, 100, 130, 200, 230, 300, 350, 400, 450, Replaces International OEM number 47889D, Will Not Fit 154, 184, 185, (Item #: 126566) $16.40

Farmall M Magneto
Magneto
- This is a New Wico Magneto used on Farmall / IH Models: A, AV, B, BN, C, H, HV, I9, M, MTA, MTAV, MV, O4, O6, OS6, Super A, Super C, Super H, Super M, W4, W6, W6TA, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650. It is also used on some industrials and power units. (Item #: 180178, Ref: XH1344) $567.00

Farmall M Magneto Coil Cover
Magneto Coil Cover
- For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105661, Ref: 47449DAY) $29.50

Farmall M Magneto Condenser
Magneto Condenser
- Condenser for IH Models using H4 F4, J4 Magneto (replaces 373892R91). For tractor models 100, 130, 200, 300, 350, W4, W6, A, B, BN, C, H, M. Note, this condenser will ship as one of two functionally identical versions shown, a long piece OR a short with an extension, depending on stock available. Replaces 21409DA, 21409DB, 354136R92, 373892R91, 47546D, 71455C91 (Item #: 111418, Ref: 71455C1) $10.90

Farmall M Magneto Distributor Cap, H4 Magneto
Magneto Distributor Cap, H4 Magneto
- For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105662, Ref: 47413DYC) $17.00

Farmall M Magneto Gasket Set
Magneto Gasket Set
- This magneto gasket set is for H4 Magnetos. It contains; Coil cover gasket 47453D, Distributor body gasket 47408D, Distributor gear cover gasket 49419D, Condenser hole cover gasket 359966R1 (48472DA), Magneto mounting gasket 55780DE (55780DD). Replaces: 359966R1, 47408D, 47453D, 48472DA, 49419D, 55780DD, 55780DE, E4226. For tractor models A, AV, B, BN, C, H, HV, I4, I6, I9, M, MTA, MV, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, T4, T5, T6, T9, U2, U2A, U4, U6, U9, W4, W6, W6TA, W9, WR9, WR9S, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, 400, 450 (Item #: 111272, Ref: MGK103) $10.00

Farmall M Magneto or Distributor Drive Shaft
Magneto or Distributor Drive Shaft
- Verify part number before ordering. For tractor models (300, 350, 400, 450 all not used with hydra touch system), (H, HV serial number 268224 and up), (M, MD, MDV, MV all serial number 148867 and up), Super H, Super HV, (Super M, Super MTA not used with hydra lift, attached with engine driven pump). (Item #: 173506, Ref: 352079R1) $130.00

Farmall M Magneto Points
Magneto Points
- Point Set Fits J4 and H4 Magneto (can work with F4 magneto with modify) (Item #: 111110, Ref: 353171R91) $9.00

Farmall M Magneto, Remanufactured, 374867R91
Magneto, Remanufactured, 374867R91
- For International / Farmall tractor models A, B, C, H, M, W4, W6, 100, 130, 200, 300, 350, Replaces International OEM number 374867R91, Right-hand flange mount, International H4 magneto, For Tune-Up Kit use Item #: 105661, (Item #: 203606) $1025.01

Farmall M Magneto Rotor H4 Magneto
Magneto Rotor H4 Magneto
- This Rotor is used on tractors with H4 magneto. Replaces 47425DX, 47425DY, 47428DA (Item #: 111106, Ref: 47425DY) $12.20

Farmall M Magneto Tune-up Kit For H4
Magneto Tune-up Kit For H4
- Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Item #: 105297, Ref: 21A10R) $22.90

Farmall M Point Set
Point Set
- For International / Farmall tractor models A, B, C, H, M, W4, W6, 100, 130, 200, 300, 350, Replaces International OEM number A2437A, Fits Fairbanks Morse FM-XV magneto, (Item #: 111707) $17.10

Farmall M Push\Pull Switch Knob
Push/Pull Switch Knob
- For International / Farmall tractor models A, B, C, Cub, H, HV, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, W4, W6, W9, Replaces International OEM number 8732D, Knob only replacement for push/pull switches, (Item #: 126614) $7.00

Farmall M Rotor
Rotor
- Used with Delco distributors 1111411 with a clip held cap. For tractor models: A, I4, AV, Super A, Super AV, Super AV1, B, BN, C, Super C, H, HV, Super H, Super HV, M, Super M, MTA, Super MTA, MV, Super MV, O4, O6, OS4, OS6, T6, W4, W6, 354 (distributors with a tach drive). Replaces 3069778R1. (Item #: 110177, Ref: 1750498M1) $3.60

Farmall M Spark Plug
Spark Plug
- Spark Plug 18MM Thread Diameter for: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. Replaces OEM number 360942R1. Also replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs (Item #: 111742, Ref: AL386) $3.20

Farmall M Spark Plug Wire Set, Custom
Spark Plug Wire Set, Custom
- IH or Delco Distributors and Magnetos. For the following models with 90 degree angle boots: A, I4, AV, Super A, Super A1, Super AV, SuperAV1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, H, HV, Super H, Super HV, M, MD, Super M, Super MD, Super MDV, MDV, Super MDVTA, MTA, Super MTA, MV, Super MV, Super MVTA, O4, O6, ODS6, OS4, OS6, T340, T5, T6, TD6, SuperW4, W4, Super W6, Super W6TA, W6, W6TA, Super WD6, WD6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404, 424, 444, 450, W450, 504. Replaces the following OEMS: 352947R91, 352951R91, 352954R91, 352956R91, 356687R92, 356689R92, 356691R91, 356694R92, 356695R92, 356697R93, 362439R91, 362789R91, 407487R1, 45327DA, 46277DA, 50075D, 52794D, 65352D, 65357D, 65358D, and 65359D. (Item #: 120100, Ref: S.67475) $15.20

Farmall M Starter, 6V
Starter, 6V
- Delco type, 6V, Rotation: CCW, Teeth 10, IH TRACTORS: H (s/n 19234-later), I4, I6, M (s/n 28175-later), O4, O6, OS4, OS6, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6 Replaces Delco 1108012. Replaces International 357907R91 (Item #: 127035, Ref: 1108038) $219.00

Farmall M Starter, 6 Volt, 2 Bolt Mount
Starter, 6 Volt, 2 Bolt Mount
- 2-bolt mounted starter for C163 gas engine on H (to serial number 19233), HV, for 248 gas on M (to serial number 28174), 152 Gas on OS4 (1940 to 1951), C248 Gas on O-6 (1940 to 1951), C264 gas on O-9 (1940 to 1951), C163 Gas on Super W-4 (1952 to 1954), C264 Gas on Super W-6/6TA (1946 to 1951), C335 Gas on Super W-9 (1946 to 1951), C163 Gas on I4 (1940 to 1951). Replaces 1107427, 997870R91, 1107448, 997870R91, 104219A2R. Can be used on a 12 volt system and recommend installing heavy duty starter drive part number 565549-NEW. (Item #: 109769, Ref: 1107448) $137.00

Farmall M Starter Armature
Starter Armature
- Used with Delco Starter # 736C, 737B, 737G, 1107067, 1107074, 1107093, 1107169, 1107174, 1107404, 1107407, 1107408, 1107427, 1107430, 1107435, 1107444, 1107448, 1107462, 1107487, 1107490, 1107926, 1107999, 1108012, 1108016, 1108038, 1108041, 1108060, 1108080, 1108092, 1108097, 1108103, 1108112, 1108142, 1108158, 1108173, 1108174. Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Item #: 182636, Ref: 1871662) $93.58

No
Picture
Starter Assembly
- For 6 volt systems in tractors:H, M, Super H, Super M: 4 series. Can replace original Delco 1107448 and TISCO starter 5218-EX. (Item #: 109769, Ref: S14132) $137.00

Farmall M Starter - Delco Style (4132), Remanufactured, Delco Remy, 1107427, 104219A2
Starter - Delco Style (4132), Remanufactured, Delco Remy, 1107427, 104219A2
- For International / Farmall tractor models H (s/n 19233-earlier), HV, I4, M (s/n 28174-earlier), MTA, O4, O6, O9, OS4, OS6, Super H, Super W4, Super W6, Super W9, W4, Replaces International OEM number 104219A2, 997870R91, 104219A2R, Replaces Delco Remy manufacturer number 1107427, 1107448, Replaces manufacturer number 4132, 140-013, 91-01-3639, Delco Style, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For 6 Volt use Item #: 203150, Additional Handling and Oversize Fees Apply To This Item, (Item #: 210141) $334.01

No
Picture
Starter - Delco Style DD (4132), Remanufactured, Delco Remy, 1107427, 104219A2
- For International / Farmall tractor models H (s/n 19233-earlier), HV, I4, M (s/n 28174-earlier), MTA, O4, O6, O9, OS4, OS6, Super H, Super W4, Super W6, Super W9, W4, Replaces International OEM number 104219A2, 997870R91, 104219A2R, Replaces Delco Remy manufacturer number 1107427, 1107448, Replaces manufacturer number 4132, 140-013, 91-01-3639, Delco Style: Direct Drive, Voltage: 6, Rotation: Counter Clockwise, Teeth: 10, For a New version of this sku use Item #: 109769, (Item #: 203150) $353.37

Farmall M Starter Drive
Starter Drive
- Starter drive, services Delco starter: 1108913. Tractors: M, Super M. 12 teeth. For M, Super M (Item #: 111670, Ref: 356037R91) $88.67

Farmall M Starter Drive
Starter Drive
- This Starter drive fits gas engines for the following models: A, B, C, H, M, Super A, Super C, Super H, W4, W6, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450 Replaces OEM# 1107021, 1107412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 1107408, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. (Item #: 107059, Ref: 565549) $32.00

Farmall M Starter Drive Housing
Starter Drive Housing
- This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

Farmall M Starter Drive, Improved Style
Starter Drive, Improved Style
- This improved style starter drive is a positive ratchet style. For A, B, C, H, M, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450, Super A, Super C, W4, W6 all using the following starters 1107021, 2207412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 11074808, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Item #: 112575, Ref: 565549-New) $59.94

Farmall M Starter Drive Parts
Starter Drive Parts
- Complete unit available as 356037R91 (Item #: 178541, Ref: SPD12) $139.00

Farmall M Starter Drive Spring
Starter Drive Spring
- Spring, main drive, for starter 77695H. Tractors:Super A, C, Super C, H, M, Super M, 4, W4, 6, W6, Super W6, 100, 130, 140, 300, 330, 340, 350. For 100, 130, 140, 300, 330, 340, 350, 4, 6, C, M, Super C, Super M, Super A, W4, W6 (Item #: 111718, Ref: 1860639) $31.00

Farmall M Starter Nose Cone
Starter Nose Cone
- This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $52.00

Farmall M Starter Switch Actuator
Starter Switch Actuator
- This new foot starter switch actuator lever and bracket fits; H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV and Super MV where a foot activated starter switch mounts to the steering post. Replaces: Lever: 351922R11, Bracket: 351924R1 (Item #: 185010, Ref: IHS3263) $57.14

Farmall M Starter Switch, Manual
Starter Switch, Manual
- For H, M, Super M, MD, O4, OS4, W4, O6, OS6, ODS6, W6, WD6. Replaces delco 405C, IH64931H, 356913R1, 1996487. Base mount with 7/8 inch hole. (Item #: 105684, Ref: 9N11450A) $9.90

Farmall M Terminal Clip
Terminal Clip
- Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Item #: 117534, Ref: 79407H) $6.50

Farmall M Tune-up Kit
Tune-up Kit
- This Tune-up Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 111814, Ref: IHTK1) $31.00

Farmall M Tune-up Kit
Tune-up Kit
- This Tune-up Kit is for Delco Distributors with clip help cap. 4 Cylinder kit includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For tractor models with clip held Type Delco Distributor Caps. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. Verify correct spark plug replacement. Note, not for British Delco Distributors 7953342. (Item #: 173738, Ref: MFITK10) $27.30

Farmall M Tune-up Kit
Tune-up Kit
- For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Cub 154, Cub 185, H, HV, M, MD, Super A, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 560, Thread: 18 mm, (Item #: 181488) $40.10

Farmall M Tune-up Kit, Basic
Tune-up Kit, Basic
- This basic tune-up kit is for 4 cylinder gas engines with battery ignition from 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Item #: 105572, Ref: ATK5BIR) $14.10

Farmall M Voltage Regulator
Voltage Regulator
- Regulator, 6 volt, positive ground, saddle mount, 4 terminal. Replaces Delco cut outs 1116766 and 1116809 when used with conversion kit VRK1815. For tractor models Cub, Cub Lo-Boy, A, Super A, B, C, H, M. Replaces: 1118265, 1118305, 1118790, 1118786. (Item #: 105284, Ref: VR1813) $33.00

Farmall M Voltage Regulator, 6 Volt, Positive Ground
Voltage Regulator, 6 Volt, Positive Ground
- REPLACES 121578C1, Delco 1118308, 1118780 and 1119575. Fits tractor models: 100, 130, 140, 200, 330, 340, Cub, Cub Lo-Boy, Super A, Super C, H, M, MTA. This external voltage regulator has a flat base for mounting. There are 4 terminals (lights, battery, field and generator). Designed for A type circuits in positive ground systems with 2 brush generators Measures 7 to 9 output amps. (Item #: 105516, Ref: GDR6003) $30.00

No
Picture
Wiring Harness
- Wiring harness, switch to rear light. For M, MD, MV, Super MD, Super MDV. Restoration Quality. (Item #: 358121R91) $67.62

Farmall M Wiring Harness
Wiring Harness
- Wiring Harness, Headlights. For H, HV, M, MD, MDV, MTA, MV, Super M (Item #: 173035, Ref: 52973DA) $15.20

Farmall M Wiring Harness
Wiring Harness
- For M with Regulator on Generator. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Item #: 126814, Ref: R3724) $280.00

No
Picture
Wiring Harness
- For model M, Super MTA from serial number F28175 and from serial number L504802. (Item #: 126788, Ref: R4147) $322.15

No
Picture
Wiring Harness - 12 Volt
- Used when tractor has been converted to 12 volts with our 12 volt conversion kit. For tractor models H, Super H, M, Super M (Item #: 164232, Ref: HM12VOLTWIRES) $29.70

Farmall M Wiring Harness, 6V Systems
Wiring Harness, 6V Systems
- For International / Farmall tractor model M (if converted to regulator on generator), For 6 volt voltage regulator systems only, Cloth covered - like original, Includes wiring instructions and light wires, (Item #: 126786) $300.00

Farmall M Wiring Harness, Complete
Wiring Harness, Complete
- For M with Regulator on Steering Post Box. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Item #: 126787, Ref: R3723) $300.00

Farmall M Wiring Harness Grommet
Wiring Harness Grommet
- For International / Farmall tractor models A, B, C, H, HV, I4, I6, I9, M, MD, O4, O6, OS4, OS6, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, Replaces International OEM number 52062D, Mounts in amp box, Outer Diameter: 1.810", Inner Diameter: 1.246", (Item #: 126808) $5.80

Farmall M Wiring Harness, Main
Wiring Harness, Main
- Main cable with battery ignition for gas tractors: M, MV (serial number FBK229911 and above), Super M, MTA (serial number F501 to F28174 and L-500001 to L-504801). Cloth covered harness is manufactured to restoration standards. (Item #: 172840, Ref: 354296R91) $38.20

Farmall M Wiring Harness, Main
Wiring Harness, Main
- For tractor models H serial number 501 to 340953 (with regulator on generator), M serial number 501 to 187002. (Item #: 115557, Ref: 56281D) $91.00

Farmall M Wiring Harness, Regulator Cable
Wiring Harness, Regulator Cable
- For tractor models H, HV, M, MV, Super M, Super MTA. (Item #: 162031, Ref: 354297R91) $17.62

Engine Bearings
Farmall M Cam Bearing Set
Cam Bearing Set
- 3 bearings. For tractor models 400, (450 with C281 engine), M, MTA, MV, O6, OS6, Super M, Super W6, W400, (W450 with C281 engine), W6, W6TA. (Item #: 106662, Ref: CBS248) $47.10

Farmall M Connecting Rod Bearing - .002
Connecting Rod Bearing - .002
- 0.002 Oversize Connecting Rod Bearing. (C248 CID Gas and Distillate 4-cylinder engine). Rod Journal diameter 2.5475 inch. Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. All with 2.548 inch original standard journal. Replace 356989R11 (Item #: 106477) $13.90

Farmall M Connecting Rod Bearing - .010
Connecting Rod Bearing - .010
- 0.010 Oversize Connecting Rod Bearing. (C248 CID Gas and Distillate 4-cylinder engine). Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. All with 2.548 inch original standard journal. Replace 356955R11 (Item #: 106478) $17.80

Farmall M Connecting Rod Bearing - .020
Connecting Rod Bearing - .020
- 0.020 Oversize Connecting Rod Bearing. (C248 CID Gas and Distillate 4-cylinder engine). Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. All with 2.548 inch original standard journal. Replace 356956R11 (Item #: 106479) $21.30

Farmall M Connecting Rod Bearing - .030
Connecting Rod Bearing - .030
- 0.030 Oversize Connecting Rod Bearing. (C248 CID Gas and Distillate 4-cylinder engine). Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. All with 2.548 inch original standard journal. Replace 356987R11 (Item #: 106480) $19.50

Farmall M Connecting Rod Bearing - Standard
Connecting Rod Bearing - Standard
- Standard Connecting Rod Bearing. (C248 CID Gas and Distillate 4-cylinder engine). Rod Journal diameter 2.548 inch. Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. Replace 356957R11 (Item #: 106476) $15.50

Farmall M Main Bearings - .002
Main Bearings - .002
- This 0.002 oversize bearing set is used on Early C248 engines with crankshafts marked 45571DB or 45571DC. Used on I6 (serial number 35599 and earlier), M (serial number 278049 and earlier), MV (serial number 278049 and earlier), O6 (serial number 35463 and earlier), OS6 (serial number 35463 and earlier), W6 (serial number 35463 and earlier), T6 (serial number 7610 and earlier) Replaces 377977R91 (Item #: 106575) $133.00

Farmall M Main Bearings - .010
Main Bearings - .010
- This 0.010 oversize bearing set is used on Early C248 engines with crankshafts marked 45571DB or 45571DC. Used on I6 (serial number 35599 and earlier), M (serial number 278049 and earlier), MV (serial number 278049 and earlier), O6 (serial number 35463 and earlier), OS6 (serial number 35463 and earlier), W6 (serial number 35463 and earlier), T6 (serial number 7610 and earlier) Replaces 377977R91, 377979R11, 377980R11 (Item #: 106576) $124.00

Farmall M Main Bearings - .020
Main Bearings - .020
- This 0.020 oversize bearing set is used on Early C248 engines with crankshafts marked 45571DB or 45571DC. Used on I6 (serial number 35599 and earlier), M (serial number 278049 and earlier), MV (serial number 278049 and earlier), O6 (serial number 35463 and earlier), OS6 (serial number 35463 and earlier), W6 (serial number 35463 and earlier), T6 (serial number 7610 and earlier) Replaces 377981R91, 377982R11, 377983R11 (Item #: 106577) $116.00

Farmall M Main Bearings - .030
Main Bearings - .030
- This 0.030 oversize bearing set is used on Early C248 engines with crankshafts marked 45571DB or 45571DC. Used on I6 (serial number 35599 and earlier), M (serial number 278049 and earlier), MV (serial number 278049 and earlier), O6 (serial number 35463 and earlier), OS6 (serial number 35463 and earlier), W6 (serial number 35463 and earlier), T6 (serial number 7610 and earlier) Replaces 372130R91 (Item #: 106578) $160.00

Farmall M Main Bearings - Standard
Main Bearings - Standard
- This Standard bearing set is used on Early C248 engines with crankshafts marked 45571DB or 45571DC. Used on I6 (serial number 35599 and earlier), M (serial number 278049 and earlier), MV (serial number 278049 and earlier), O6 (serial number 35463 and earlier), OS6 (serial number 35463 and earlier), W6 (serial number 35463 and earlier), T6 (serial number 7610 and earlier) Replaces 45628DAX, 45630DAX, 367892R91 (Item #: 106574) $130.00

Farmall M Rod Bearing, .002
Rod Bearing, .002
- Used on early 2.498 inch std rod journals on C248 engines, this .002 oversize bearing replaces OEM number 355278R11. This is for early crankshafts marked 45571DB or 45571DC. I6 (s/n 35599-earlier), M (s/n 278049-earlier), MV (s/n 278049-earlier), O6 (s/n 35463-earlier), OS6 (s/n 35463-earlier), W6 (s/n 35463-earlier), T6 (s/n 7610-earlier). Sold per rod. (Item #: 106472) $33.00

Farmall M Rod Bearing, .010
Rod Bearing, .010
- Used on early 2.498 inch std rod journals on C248 engines, this .010 oversize bearing replaces OEM number 45743DBX. This is for early crankshafts marked 45571DB or 45571DC. I6 (s/n 35599-earlier), M (s/n 278049-earlier), MV (s/n 278049-earlier), O6 (s/n 35463-earlier), OS6 (s/n 35463-earlier), W6 (s/n 35463-earlier), T6 (s/n 7610-earlier). Sold per rod. (Item #: 106473) $22.00

Farmall M Rod Bearing, .020
Rod Bearing, .020
- Used on early 2.498 inch std rod journals on C248 engines, this .020 oversize bearing replaces OEM numbers 45744DBX, 377976R11. This is for early crankshafts marked 45571DB or 45571DC. I6 (s/n 35599-earlier), M (s/n 278049-earlier), MV (s/n 278049-earlier), O6 (s/n 35463-earlier), OS6 (s/n 35463-earlier), W6 (s/n 35463-earlier), T6 (s/n 7610-earlier). Sold per rod. (Item #: 106474) $30.78

Farmall M Rod Bearing, .030
Rod Bearing, .030
- Used on early 2.498 inch std rod journals on C248 engines, this .030 oversize bearing replaces OEM number 45629DAX. This is for early crankshafts marked 45571DB or 45571DC. I6 (s/n 35599-earlier), M (s/n 278049-earlier), MV (s/n 278049-earlier), O6 (s/n 35463-earlier), OS6 (s/n 35463-earlier), W6 (s/n 35463-earlier), T6 (s/n 7610-earlier). Sold per rod. (Item #: 106475) $31.80

Farmall M Rod Bearing Set, C248 Gas or Distillate Engine - STD
Rod Bearing Set, C248 Gas or Distillate Engine - STD
- Available in standard, .010 or .020. Connecting Rod Bearing Kit (C248 CID Gas and Distillate 4-cylinder engine). Rod Journal diameter 2.5475 inch. Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (C264 CID Gas 4-cylinder engine.) Models Super M and MTA, Super W6 and W6-TA. (C264 CID Gas 4-cylinder engine) Models 400 and W400. Models Super 400 and W400 with serial number 163808 and up. (C264 and C281 CID Gas 4-cylinder engine) Models 450 and W450 with C281. Specify size of standard, .010 or .020 in "comments box" when ordering. (Item #: 183974, Ref: CRK264) $58.00

Farmall M Rod Bearing Set, Standard
Rod Bearing Set, Standard
- Connecting Rod Bearing Kit (standard) (C248 CID Gas and Distillate 4-cylinder engine). Model M and MV to serial number 278049, O6, OS6, W6, to serial number 35463. Rod Journal diameter 2.4975 inch. If other than standard, specify size in comments. (.010 .020 only) (Item #: 184698, Ref: CRK248) $151.00

Farmall M Rod Bearing, Standard
Rod Bearing, Standard
- Used on early 2.498 inch std rod journals on C248 engines, this bearing replaces OEM number 45745DBX. This is for early crankshafts marked 45571DB or 45571DC. I6 (s/n 35599-earlier), M (s/n 278049-earlier), MV (s/n 278049-earlier), O6 (s/n 35463-earlier), OS6 (s/n 35463-earlier), W6 (s/n 35463-earlier), T6 (s/n 7610-earlier) (Item #: 106471) $22.00

Farmall M Rod Bearing, STD - Single
Rod Bearing, STD - Single
- Sold individually. For tractor models 400, (450 with C281 engine), (M, MV serial number 278050 and up), MTA, (O6, OS6 serial number 35464 and up), Super M, Super W6, W400, (W450 with C281 engine), (W6 serial number 35464 and up), W6TA. (Item #: 106476, Ref: 356957R11) $15.50

Engine Gaskets
Farmall M Crank Seal, Front
Crank Seal, Front
- This front crankshaft oil seal has a 2.625 inch Inside Diameter, a 3.38 inch Outside Diameter and is .475 inch wide. It Fits: I6, I9, ID6, ID9, M, MD, MDV, MV, O6, ODS6, OS6, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, T6, T6-61, T9, TD6, TD6-61, TD9, TD9-91, W400, W450, W6, W9, WR9, WR9S, 400, 450, 600, 650, B-450, BM, BMD, SBMD, Super BM. Replaces: 258511R91, 357972R91, 357977R91, 358511R91, 53872D, 410708 (Item #: 106640, Ref: 357972R1) $13.60

Farmall M Crank Seal, Rear, Gas
Crank Seal, Rear, Gas
- Rear crankshaft seal for gas engines. Requires 2 per engine. For tractor models 400, 450, M, MTA, MV, O6, OS6, Super M, Super W6, W400, W450, W6, W6TA. All with 248, 264, or 281 CID gas engines. (Item #: 106654, Ref: 57613DA) $7.70

Farmall M Gasket Set, Full
Gasket Set, Full
- Complete Gasket Set with seals (C248 CID Gas and Distillate 4-cylinder engine). Models M and MV, O6, OS6, W6 and (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons.) Models Super M and MTA, Super W6 and W6-TA, 400, W400, 450, W450. (Item #: 106719, Ref: GK7510S) $166.00

Farmall M Head Gasket
Head Gasket
- For tractor models (400, W400 serial number 163807 and below), M, MTA, MV, O6, OS6, Super M, Super W6, W6, W6TA. (Item #: 172660, Ref: 369957R1) $59.00

Farmall M Head Gasket Set
Head Gasket Set
- For C248 and 264 CID distillate 4 cylinder engine in tractors M and MV to serial number 278049, O6, OS6, W6 to serial number 35463. For tractor models 400, 450, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6. (Upper gasket set with head gasket). Replaces VGK7510S. (Item #: 106680, Ref: VGK7510S) $67.00

Farmall M Lower Gasket
Lower Gasket
- LOWER GASKET For M, MV, O6, OS6, W6 (Item #: 178834, Ref: CS7510S) $186.00

Farmall M Manifold Gasket Set
Manifold Gasket Set
- This Manifold Gasket Set is used with 358308R11 manifold. Replaces Manifold Gasket: 46173DC, Carb Gasket: 21632D, 31336D, 530681R2. MS2620 (Item #: 101546, Ref: R0055G) $9.50

Farmall M Oil Pan Gasket
Oil Pan Gasket
- For tractor models 400, 450, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6. (Item #: 106700, Ref: 46109DA) $12.80

Farmall M Rear Crankshaft Seal Kit
Rear Crankshaft Seal Kit
- Fits tractor models I6, M, MTA, MV, O6, OS6, Super M, Super MV, Super W6, Super W6TA, T6, T6-61, U6, W6, 400, 450 (Gas or LP), Wheatland: 400, 450 (Gas or LP); Replaces: Contains two: 57613DA, (subs for 46134D): 46134DA, (sub for 46131DA): 46131DB, Contains two (sub for 46121D): 46121DA, Contains two (sub for 379617R91, 379618R91 and 842578R91): 25093DA (Item #: 178604, Ref: IHS2641) $38.60

Farmall M Upper Gasket Set
Upper Gasket Set
- For tractor models with the C264 and C281 engines 400, 450, W450, M, MTA, MV, O6, OS6, Super M, Super W6, W400, W6, W6TA.HGS248 (Item #: 106680, Ref: VGK7510S) $67.00

Farmall M Valve Cover Gasket
Valve Cover Gasket
- Used on M, Super M, 400, 450 and other equipment with International Gas Engines C248, C264, C281. Replace original part number 45952DB, 45952DC, 45952DA 68040D, 842578R95. (Item #: 128603, Ref: 45952DB) $13.60

Farmall M Water Jacket Gasket
Water Jacket Gasket
- For tractor models 400, 450, M, Super M, Super MTA with C264 gas engine. (Item #: 110533, Ref: 46128DB) $6.50

Engine Rebuild Kits
Farmall M Basic Engine Overhaul Kit, Less Bearings with Flat Head Pistons
Basic Engine Overhaul Kit, Less Bearings with Flat Head Pistons
- Late serial number. Basic Engine Kit, less bearings (C248 CID Gas and Distillate 4-cylinder engine). Model M and MV serial number 278050 and up, O6, OS6, W6, serial number 35464 and up. (for engines with flat head piston.) Kit contains sleeves and sleeve seals, pistons and piston rings (overbore from 3-7/8 inch to 4 inch), pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 184145, Ref: BEKH1151C-LCB) $603.00

Farmall M Basic Engine Overhaul Kit, Less Bearings with Stepped Head Pistons
Basic Engine Overhaul Kit, Less Bearings with Stepped Head Pistons
- Early serial number. Basic Engine Kit, less bearings (C248 CID Gas 4-cylinder engine). Model M and MV to serial number 278049, O6, OS6, W6, to serial number 35463. (for engines with stepped head high compression piston.) Kit contains sleeves and sleeve seals, pistons and piston rings (overbore from 3-7/8 inch to 4 inch), pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130586, Ref: BEKH1155A-LCB) $465.00

Farmall M Basic Engine Overhaul Kit, Less Bearings with Stepped Head Pistons
Basic Engine Overhaul Kit, Less Bearings with Stepped Head Pistons
- Late serial number. (C248 CID Gas 4-cylinder engine). Model M and MV serial number 278050 and up, and models O6, OS6, W6, serial number 35464 and up. (for engines with stepped head high compression piston.) Kit contains sleeves and sleeve seals, pistons and piston rings (overbore from 3-7/8 inch to 4 inch), pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 184144, Ref: BEKH1155B-LCB) $983.81

Farmall M Basic In-Frame Engine Kit, with Flat Head Pistons
Basic In-Frame Engine Kit, with Flat Head Pistons
- All serial numbers. Basic In-Frame Engine Kit, less bearings (C248 CID Gas or Distillate 4-cylinder engine). Model M, MV, O6, OS6, W6. Verify Piston Pin diameter of 1 5/16 inch. (For engines with flat head piston.) Kit contains complete sleeve and piston kit (overbore from 3-7/8 inch to 4 inch) with rings, pins and retainers, upper gasket set (with head gasket) and pan gasket. (Item #: 184161, Ref: BIFH1151A) $611.00

Farmall M Basic In-Frame Engine Kit with Stepped Head Pistons
Basic In-Frame Engine Kit with Stepped Head Pistons
- Early serial number. Basic Engine Kit, less bearings (C248 CID Gas 4-cylinder engine). Model M and MV to serial number 278049, O6, OS6, W6, to serial number 35463. (for engines with stepped head high compression piston.) Kit contains complete sleeve and piston kit (overbore from 3-7/8 inch to 4 inch) with rings, pins and retainers, upper gasket set (with composite head gasket) and pan gasket. (Item #: 189671, Ref: BIFH1155A) $322.00

No
Picture
Engine Overhaul Kit, Comprehensive, Less Bearings with Stepped Head
- Early serial number - Overhaul kit, less bearings (C248 CID gas 4-cylinder engine). Model M and MV to serial number 278049, O6, OS6, W6, to serial number 35463. (For engines with stepped head high compression piston.) Kit contains sleeves and sleeve seals. Pistons and piston rings (overbore from 3-7/8 inch to 4 inch), pins and retainers, pin bushings. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Verify the part numbers on your old intake and exhaust valves. Kit includes Intake valve 50731DA, and exhaust valve 50732DA. (Item #: 184940, Ref: EOK1155A-LCB) $1159.01

Farmall M Valve Overhaul kit
Valve Overhaul kit
- Fits M, MV, O6, OS6, W6. For DISTILLATE. Kit includes valve, valve springs, valve keys, valve guides. Valve length 5.56 inch. (Item #: VOKH248) $207.69

Farmall M Valve Overhaul Kit
Valve Overhaul Kit
- Fits M, MV, O6, OS6, W6, Super M, MTA, Super W6, W6-TA (Gas 4 cylinder C248, C264). Kit includes valves, valve springs, valve keys, valve guides. Valve length 5.875 inch. (Item #: 184517, Ref: VOKH264) $284.00

Engine Parts
No
Picture
3rd and 4th Drive Gear, Used
- For International tractor models M, MD, Replaces International OEM number 56530DA, Teeth: 26 and 29, 3rd and 4th, For a new version of this item use Item #: 110914, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435518) $84.01

No
Picture
Belt Pulley Block Off Plate
- For International / Farmall tractor models I6, M, MD, OS6, Super M, Super W6, W6, 400, 450, 560, 660, Replaces International OEM number 49053DB, 365128RI, (Item #: 126478) $42.70

Farmall M Camshaft
Camshaft
- With nut and washer. For tractor models M, Super M, 400, 450 Gas. (Item #: 110901, Ref: 48196DBX) $327.00

Farmall M Camshaft Gear
Camshaft Gear
- 58 teeth. For tractor models M, MV, Super M, Super MTA, Super MV, 06, T-6, W-6, Super W-6, 400, and 450, all with the C248, C264, and C281 gas engines For gas powered tractors. Replaces: 6760D, 6760DB. (Item #: 108891, Ref: 6760DB) $154.00

No
Picture
Connecting Rod Bolt Lock Tab
- .490 inch bolt hole diameter, 8 used per engine, sold individually. For tractor models (I6, M, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6-61, W6, 400, 450 gas, LP with C248, C264 and C281 engines 8 used), (WD9, WDR9 early diesels up to engine serial number 10265 16 used). (Item #: 167084, Ref: 47496DB) $7.70

Farmall M Connecting Rod, Used
Connecting Rod, Used
- For International tractor models M (V), MD (V), Super M, Super MTA, 400 (s/n 136834-163807), 450 (s/n 136834-163807), Replaces International OEM nos 45750DAX, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431317) $25.01

Farmall M Crankshaft Gear
Crankshaft Gear
- 29 Teeth. Fits the M, MV, Super M, Super MTA, Super MV, O6, T-6, W-6, Super W-6, 400, and 450, all with the C248, C264, and C281 gas engines. (Item #: 121569, Ref: 45627D) $123.00

Farmall M Crankshaft Idler Gear, Used
Crankshaft Idler Gear, Used
- For International tractor models M, Super M, Super MTA, 400, 450, Replaces International OEM nos 6362DX, Teeth: 41, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498379) $78.01

No
Picture
Crankshaft, Remanufactured, 45571DC
- For International / Farmall tractor models M, W6, Replaces Casting number 45571DC, 45571DB, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200230) $415.01

Farmall M Cylinder Head
Cylinder Head
- This is an LP Head for a 400, 450 LP. It will increase compression if replacing a GAS Head. Head includes guides and seats. Order part number 122658 LP high compression valve train kit which is required for engines switching from a gas cylinder head to the LP cylinder head as the LP head uses longer valves than the gas.As this is a BARE casting with guides and seats, customer is responsible for all final machining including head surfacing and machining for push rod clearance if needed. When mounting on a M or SUPER M there is no provision for the air cleaner breather line to rear of head, just block it off. For models 400, 450, M, Super M, Super MTA, MV, O6, OS6, W6, T6, Super MV, Super W6, Super W6TA, W400, W450, all with C248, C264 or C281 gas or LP engines. (Item #: 121586, Ref: 364586R11) $1099.01

No
Picture
Cylinder Head, Remanufactured, 6336D
- For International / Farmall tractor models M, Super M, W6 (Kerosene), Replaces International Casting number 6336D, 6776DB, Engine 248, Cylinders: 4, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205492) $870.01

No
Picture
Cylinder Head, Remanufactured, 8777D
- For International / Farmall tractor models M, Super M, W6 (Distillate), Replaces International Casting number 8777D, 8790D, Casting No. 8777D, 8790D, Engine 248, Cylinders: 4, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205491) $1100.01

Farmall M Cylinder Head Stud
Cylinder Head Stud
- 1/2 inch x 7 1/16 inch. For gas and LP Models: I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6, U6, W6, 400, 450. (Item #: 178330, Ref: 49023DA) $17.60

Farmall M Cylinder Head Stud
Cylinder Head Stud
- 1/2 inch x 6 7/8 inch. For gas and LP Models: I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6, U6, W6, 400, 450. (Item #: 178329, Ref: 46117D) $17.98

No
Picture
Driving Gear 1st and 2nd, Used
- For International tractor models M, MD, MDV, MV, Replaces International OEM nos 56528DA, Teeth: 19 and 23, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439854) $70.01

Farmall M Governor Spring
Governor Spring
- This Internal Governor Spring is 2.700 inches overall length with 0.110 inch wire diameter. It fits H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, T6, T9, W4 Through 9 Series, W6, W6TA, W9, WR9, WR9S, 300, 350, 400, 450, 600, 650, Wheatland: 400, 450. It replaces original part numbers 357012R1 and 49407DBX. (Item #: 179313, Ref: 49407DBX) $11.60

Farmall M Governor Throttle Shaft Rebuild Kit
Governor Throttle Shaft Rebuild Kit
- This Governor Throttle Shaft Rebuild Kit fits: H, HV, I4, I6, M, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, T6, T6-61, U4, U6, W4, W6, 300, 350, 400, 450 all Gas and LP. Replaces: Cotter pin: 103361, Pin: 103494, Groove pin: 142952, Bushing: 45696D, Felt washer: 48493D, Lever: 6288D, Gasket: 48501D, 53877DB, 66272DA. Kit includes: lever, bushing, felt washer, (3) gaskets, groove pin, cotter pin, and pin. (Item #: 183906, Ref: IHS2559) $49.50

Farmall M Governor Thrust Bearing
Governor Thrust Bearing
- Bearing has a outer diameter of 1.575 inches, width of 0.472 of an inch, and an inner diameter of 0.510 of an inch. The lip has an outside diameter of 0.750 of an inch, the shaft has an diameter of 0.656 of an inch, and has 2 pin holes with an inner diameter measuring 0.186 of an inch. For the following models: H, HV, Super H, Super HV, M (gas), Super M (gas), Super MTA (gas), O4, O6, OS4, OS6, Super W4, W4, Super W6 (gas), Super W6TA (gas), W6 (gas), W9 (gas), WR9S (gas), B-275 (gas), B-276 (gas), 300, 350 (gas), 354 (gas), 400, W400, 444 (gas), 450 (gas), W450 (gas), 600 (gas), 650 (gas). Replaces 48250D, 48250DX, and ST506. (Item #: 183913, Ref: 351910R91) $80.35

Farmall M Hand Starting Crank
Hand Starting Crank
- For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450. Hand Starting Crank with Spinner. (Item #: 126697, Ref: 51544DBX) $86.00

Farmall M Ring Gear, Flywheel
Ring Gear, Flywheel
- For tractor models M, MD, 0DS6, Super M, Super MD, Super W6, WD6, W400, W450, W6, 400, 450, (560, 660 ALL DIESEL ONLY). This ring gear has 125 teeth, 15.72 inch outside diameter, .80 inches wide. (Item #: 103907, Ref: 266142R1) $84.00

No
Picture
Ring Gear, Flywheel
- 125 Teeth For M, MD, Super M, Super MD, W-6, WD-6, 400, 450 Gas or Diesel460, 660 Diesel (Item #: 103907, Ref: R1849) $84.00

No
Picture
Sliding Gear 1st and Reverse, Used
- For International tractor models M, MD, MV, Super M, Super MTA, Replaces International OEM nos 56533DA, Teeth: 44, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439855) $55.01

Farmall M Valve Guide
Valve Guide
- Intake and exhaust valve guide. 8 used per engine. For C248 CID distillate 4 cylinder engine in M and MV, O6, OS6, W6. Price shown is for each, sold only in multiples of 8 items. (Item #: 6338DR) $10.96

Farmall M Valve Guide
Valve Guide
- Used in gas cylinder heads with the following casting numbers: 8060, 8060D, 8060DB, 8060DC, 8060DD, 8574, 8574D, 8574DB, 8574DC, 8574DD, 362174R1, 362174R2, 362433R1, 362433R2, 362920R1, 362902R2. These heads are used on C248, C264, and C281 engines. These engines were used one Farmall / International models: M, Super M, MTA, Super MTA, MV, Super MV, O6, OS6, T6, Super W6, W6, W6TA, 400, W400, 450, W450 (Item #: 189897, Ref: 8044DR) $4.40

Farmall M Valve, Intake, Distillate Engine
Valve, Intake, Distillate Engine
- Valve length 5.56 inch. For 248 CID DISTILLATE engine. Single intake valve. The number on your intake valve should read 57698D. (Item #: 131586, Ref: 57698D) $12.80

Farmall M Valve Lifter
Valve Lifter
- This valve lifter / tappet is used on International engines C248, C264, C281, D248, D264, D281. Measures; Length: 2.655 inches, Diameter: 1.243 inches, Inside Diameter: 1.042 inches, Hole Inside Diameter: .255 inches. Replaces 45956D, 684414C1 (Item #: 192210) $24.40

Farmall M Valve Seal
Valve Seal
- For International / Farmall tractor models I6, M, MD, O6, OS6, Super M, Super W6, W6, W400, W450, WD6, 400, 450, Compatible with International Construction and industrial models T6, TD6, Compatible with International Engine (s) C248, C264, C281, D248, D264, D281, Replaces International OEM number 535166R1, (Item #: 167172) $2.50

No
Picture
Valve Service Kit
- Cylinder HEAD Service KIT For M, MV, O6, OS6, W6. Contains: springs, guides, locks, (no valves). (Item #: 131582, Ref: VSKH248) $170.00

No
Picture
Valve Service Kit
- Cylinder HEAD Service KIT For gas models 400, 450, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6. Contains: springs, guides, locks, (no valves). (Item #: 131581, Ref: VSKH264) $150.00

Farmall M Valve Set, Exhaust - Gas Engine
Valve Set, Exhaust - Gas Engine
- Valve length is 5.875 inch. Single Exhaust Valve (C248 CID Gas 4-cylinder engine). Model M and MV, O6, OS6, W6 and (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons.) Models Super M and MTA, Super W6 and W6-TA. (Item #: 108496, Ref: 50732DA) $16.00

Farmall M Valve Set, Intake, Gas Engine
Valve Set, Intake, Gas Engine
- Valve length 5.875 inch. Single Intake Valves (C248 CID Gas 4-cylinder engine). Model M and MV, O6, OS6, W6 and (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons). For tractor models Super M and MTA, Super W6 and W6-TA. (Item #: 128742, Ref: 50731DA) $10.50

Farmall M Valve Spring
Valve Spring
- For 248 CID Gas engine in: M, MV, OS6, W6. (Item #: 128517, Ref: 356951R1) $5.10

Farmall M Valve Train Kit
Valve Train Kit
- For International / Farmall tractor models I6, M, O6, Super M, Super MTA, Super W6, W6, 400 (Rowcrop and Wheatland), 450 (Rowcrop and Wheatland), Replaces International OEM number 356951R1, 47277D, 364589R1, 364590R1, 41339D, 41349D, 61479HA, Engine: C248, C264, C281 gas / lp, Includes: Intake and Exhaust Valves, Springs, Retainers, Valve and Stem Retainer Clips, Roto Caps are not included, Valves will need to be ground to match seats, (Item #: 122658) $401.00

No
Picture
Valve Train Kit
- For International / Farmall tractor models I6, M, MV, O6, OS6, W6, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C248 (Distallate), Kit Includes: Intake valves, exhaust valves, valve springs, valve guides, and valve keepers, (Item #: 187189) $253.58

Engine Pistons and Sleeves
Farmall M Piston Pin Bushing
Piston Pin Bushing
- For 248 CID GAS or Distillate engines in: 400, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W6. Outside diameter 1.410 inches, inside diameter 1.312 inches. Price shown is for each, sold only in multiples of 4 items. (Item #: 107909, Ref: 45748DAR) $14.30

Farmall M Piston Sleeve
Piston Sleeve
- 4.00 inch bore, oversized. For tractor models (M, MV serial number 278049 and up), (OS6, O6, W6 serial number 35463 and up). (Item #: 128681, Ref: SD12S) $45.50

No
Picture
Sleeve and Piston Kit
- Sleeve and Piston Kit for 1 cylinder for 248 CID 4 cylinder gas engines, with flat head pistons, 4 inch overbore. For tractor models M, MV, O6, OS6, W6. (Item #: 172290, Ref: SK262) $173.00

No
Picture
Sleeve and Piston Kit
- Sleeve and Piston Kit for 1 Cylinder for 248 CID gas engines with stepped head pistons. 4 Inch over bore. For tractor models M, MV, O6, OS6, W6. (Item #: 128649, Ref: SK267) $101.00

Farmall M Sleeve and Piston Kit, Flat Head Pistons, For Single Cylinder
Sleeve and Piston Kit, Flat Head Pistons, For Single Cylinder
- (C248 CID Gas and Distillate 4-cylinder engine). For tractor models M and MV, O6, OS6, W6. (For engines with flat head piston.) Sleeves, pistons and rings, pins and retainers. Overbore 3-7/8 inch to 4 inches. For a single cylinder. (Item #: 172290, Ref: PK151) $173.00

No
Picture
Sleeve and Piston Kit, Stepped Head Pistons
- (C248 CID Gas 4-cylinder engine). Model M and MV, O6, OS6, W6. (For engines with stepped head high compression piston.) Sleeves, pistons and rings, pins and retainers. Overbore 3-7/8 inch to 4 inches. (Item #: 179675, Ref: PK155) $1169.01

Engine Rings
No
Picture
Piston Rings
- Piston Ring Set, C264 Engine. For 264 CID Gas or LPG engine (4 inch standard bore). Complete set for 4 pistons. Each piston uses (3) 3/32 inch compression rings, and (1) 1/4 inch oil ring. Fits 264 Gas or LPG engine in M, Super M, MTA, MV, W6. Made in USA by Hastings. NOT for use with chrome sleeve liners. (Item #: 130066, Ref: 1486638) $139.00

No
Picture
Piston Rings
- For tractor models M, MV, O6, W6 with 248 CID Gas. Verify measurements of 4 inch bore, 2 compression @ 3/32, 1 compression @ 1/8, 1 oil @ 1/4 per piston. Special Order, non-refundable. (Item #: 129208, Ref: 2C7997) $37.40

No
Picture
Piston Ring Set, C248 Engine
- For 248 CID Gas engine (3-7/8 inch standard bore). Complete set for 1 piston. Each piston uses: (1) 1/8 inch and (2) 5/32 inch compression rings and (1) 1/4 inch oil ring. Fits 248 Gas engine in: I6, ID6, IU6, M, MV, o6, ODS6, OS6, T6, W6. (Item #: 129051, Ref: 2C725) $46.90

Farmall M Piston Ring Set, C248 Engine, 4 Inch Overbore
Piston Ring Set, C248 Engine, 4 Inch Overbore
- For Flat Head Piston. Ring set for 4 pistons, 1 used per engine. Contains 3 compression 3/32 inch and 1 oil ring 1/4 inch for each cylinder. 4 inch overbore size. For C248 CID 4 cylinder engine in tractors M and MV, O6, OS6, W6. For M, MV, O4, O6, OS6, W6. (Item #: 130066, Ref: PRS151) $139.00

No
Picture
Piston Ring Set - Standard - 4 Cylinder Set
- For International / Farmall tractor models I6, M, O6, OS6, W6 (all gas), Compatible with International Engine (s) C248 (gas), Bore: 3.875", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Piston Ring Set - Standard - Single Cylinder use Item #: 176374, (Item #: 176375) $201.00

No
Picture
Piston Ring Set - Standard - Single Cylinder
- For International / Farmall tractor models I6, M, O6, OS6, W6 (all gas), Compatible with International Engine (s) C248 (gas), Compatible with Oliver tractor models Super 88, 88, 1550, 1555, Bore: 3.875", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Piston Ring Set - Standard - 6 Cylinder use Item #: 176375, (Item #: 176374) $49.10

Farmall M Piston Ring Set - Standard - Single Cylinder Set
Piston Ring Set - Standard - Single Cylinder Set
- For International / Farmall tractor models M, MD, Super M, W400, 400 (diesel), Compatible with International Engine (s) D248, D264, Bore: 4.000", Ring Size: Standard, Compression Rings per Piston: (1) @ .094" and (1) @ .125" and (1) @ .156", Oil Rings per Piston: (2) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .156", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, 5th Groove Size: .250", 5th Groove Style: Cast Iron Oil, Sold per cylinder, (Item #: 130064) $235.00

Exhaust System
Farmall M Exhaust Stack - 2 1\2 inch x 12 inch, Straight Chrome
Exhaust Stack - 2 1/2" x 12", Straight Chrome
- For International / Farmall tractor models H, M, Super H, Super M, Super MTA, Style: Straight, ID: 2-1/2", Length: 12", Color: Chrome, Discoloration will occur due to a fast startup not allowing the chrome exhaust pipe to warm up slowly thus causing the “bluing”, (Item #: 112164) $40.00

Farmall M Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome
Exhaust Stack - 2-3/8" X 36", Curved Chrome
- For International / Farmall tractor models H, M, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Style: Curved, Inlet I.D.: 2-3/8", O.D.Pipe: 2-1/2", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115481) $165.88

Farmall M Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome
Exhaust Stack - 2-3/8" X 36", Curved Chrome
- For International / Farmall tractor models H, M, Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number A29991, Style: Curved, Inlet I.D.: 2-3/8", O.D. Pipe: 4", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115486) $209.00

Farmall M Exhaust Stack, Chrome, Curved
Exhaust Stack, Chrome, Curved
- Double wall. 2 3/8 inch inlet inside diameter, 27 inches overall length, 3 1/2 inches outside diameter. For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Item #: 124224, Ref: R4451) $258.00

Farmall M Exhaust Stack, Chrome, Straight
Exhaust Stack, Chrome, Straight
- Double wall, 2 3/8 inch inlet, 3 1/2 inch outlet, 24 inches overall length. For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Item #: 124225, Ref: R4450) $200.00

No
Picture
Intake/Exhaust Manifold - Gasoline
- For International / Farmall tractor models I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super W6, W6, W400, W450, 400, 450, Replaces International OEM number 362437R21, 8035DDX, For models listed using gasoline, Manifold pipe included, (Item #: 101545) $175.00

Farmall M Manifold
Manifold
- For Propane Tractors. Can also add performance when used on Gasoline Tractors. For gaskets, order part number R0055G. For short exhaust pipe, order part number R0055P. This manifold is used on Propane Head part number R5995. For tractor models 450, M, Super M, Super MTA, W6, Super W6, 400, MV, O6, Super MV, T6, W400. (Item #: 189639, Ref: 358308R11) $336.44

Farmall M Manifold Gasket
Manifold Gasket
- This Manifold Gasket Set is used with 358308R11 manifold. Replaces Manifold Gasket: 46173DC, Carb Gasket: 21632D, 31336D, 530681R2. (Item #: 101546, Ref: R0055G) $9.50

Farmall M Manifold Pipe
Manifold Pipe
- Can be used with the following manifolds 362437R21, 161158A, 161818A, 761615M91, 4512715, R0947, L415. For tractor models M, Super M, W6, T6, 400, W400, 450, W450. (Item #: 101547, Ref: R0055P) $17.20

No
Picture
Manifold - Propane
- For International / Farmall tractor models M, MV, O6, Super M, Super MTA, Super W6, W6, W400, 400, 450, Compatible with International Construction and industrial models T6, Replaces International OEM number 358308R11, 1 piece manifold like original, This manifold will increase horsepower on gasoline tractors only, For manifold gasket set use Item #: 101547, (Item #: 189639) $336.44

Farmall M Muffler, Aluminized
Muffler, Aluminized
- Vertical muffler for gas tractor, fits engines C221 and C263. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, length 29 inches, diameter 6 inches, round body. Uses MC212 Muffler Clamp. For tractor models H, M, MD, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 450, 606, 2606, 656, 2656. Diesel engines D166, D188, D236, D282, models 340, 504, 2504, 3514, For 2500, 2504, 2606, 2656, 340, 3514, 3616, 450, 460, 504, 606, 656. Replaces 350601R95, 370773R91, 357288R92, 370644R91, 403551R1. For a black version order Item# 100807 (Item #: 185584, Ref: 370644R92) $44.00

Farmall M Muffler, Black
Muffler, Black
- This is a black version of 370644R92. Vertical muffler for gas and diesel applications.Fits engines C221 and C263. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, length 29 inches, diameter 6 inches, round body. Uses MC212 Muffler Clamp. For tractor models H, M, MD, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 450, 606, 2606, 656, 2656. Diesel engines D166, D188, D236, D282, models 340, 504, 2504, 3514, For 2500, 2504, 2606, 2656, 340, 3514, 3616, 450, 460, 504, 606, 656. Replaces 350601R95, 370773R91, 357288R92, 370644R91, 403551R1 (Item #: 100807) $35.00

Farmall M Muffler Clamp With Hardware
Muffler Clamp With Hardware
- Muffler clamp with hardware. 2 1/2". For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, 706, H, HV, M, MD, Super H, Super HV, Super M, Super MD, Super MTA, Super W6, W4, W6, WD6. (Item #: 178185, Ref: 350602R1) $14.50

Farmall M Muffler Eliminator - 2-3\8 inch X 24 inch, Straight Chrome
Muffler Eliminator - 2-3/8" X 24", Straight Chrome
- For International / Farmall tractor models H, M, Super H, Super M, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Inlet I.D: 2-3/8", O.D. Pipe: 3", Length: 24", Straight Pipe, Chrome Plated, Eliminates Muffler, (Item #: 115491) $81.17

Farmall M Muffler Oval
Muffler Oval
- Muffler. Vertical muffler for tractors. 6 inch. Oval body replaces oval body mufflers. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, total length 29 inches, diameter 6 inch round body. For gas tractor models: H and Super H, M and MV Super M and Super MTA, W4 and Super W4, W6 and Super W6, W6TA, (300 and 350 with C-175 gas), (400 and 450 with C-281 gas or D-281 diesel), (460 and 606 with C221 gas or D-236 diesel), (560 with C-263 gas or D-282 diesel). (Item #: 100821, Ref: 403551R1-OVAL) $70.00

Farmall M Muffler - Restoration Quality
Muffler - Restoration Quality
- For International / Farmall tractor models I6, M, MD, Super M, Super MTA, Super W6, TD6, W6, W400, W450, 400, 450, Replaces International OEM number 251116R92, 350601R93, 350601R94, 355870R91, 357288R92, 360078R91, 45805DB, High Temperature Paint, Inlet Length: 1-5/8', Inlet ID: 2-13/32", Shell Length: 15-1/2", Outlet Length: 13", Outlet OD: 2-3/8", Overall Length: 30", (Item #: 164538) $85.00

Farmall M Vertical Muffler
Vertical Muffler
- Stainless Steel. Also replaces 251116R92, 360078R91, 357288R92, 350601R94, 355870R91, 350601R93. For tractor models M, MD, MV, Super M, Super MD, Super MTA, Super W6, Super WD6, TD6, W6, WD6, 400, 450. Polished stainless steel can and most likely will discolor from extreme heat. Replaces: 251116R92, 350601R93, 350601R94, 355870R91, 357288R92, 360078R91, 45805DB (Item #: 164539, Ref: 45805DB) $182.15

Fuel System / Air Intake
Farmall M Air Cleaner Bowl
Air Cleaner Bowl
- Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: M, MD, WR9S, Super WD9, 400, 450, W400, W450, 460, 504, 544 diesel, 455 diesel, 2544 diesel, 5606, Gas powered combines: 403 and 453 Hillside, 503, 615, 715. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794 (Item #: 157279, Ref: R28794) $7.80

Farmall M Air Cleaner Cap, Fits INSIDE pipe
Air Cleaner Cap, Fits INSIDE pipe
- For tractor models M, MD, Super M, Super MTA, W6, WD6, Super W6, 400, 450. (Item #: 111658, Ref: R4748) $49.01

Farmall M Air Cleaner Pipe
Air Cleaner Pipe
- 2-1/4 inch outside diameter. For tractor models M, MV, Super M, Super MV, MTA, Super MV-TA, (Super W6 serial number 3951 and up), Super W6-TA, 400, 450, W400, W450 all gas or LP. Replaces 51441D. (Item #: 126383, Ref: 357028R1) $39.30

Farmall M Carburetor Float
Carburetor Float
- Float. For Updraft International Carburetors with throat size 1-1/4 inch or 1-3/8 inch. Dimensions: 2 3/16 inch length x 1 3/16 inch height, outside diameter 3 1/2 inches. For 2606, 2706, 300, 350, 400, 450, 460, 560, 600, 606, 650, 660, 706, M, MV, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6, W9, WR9, WR9S. (Item #: 107990, Ref: 47398DX) $19.00

Farmall M Carburetor Fuel Line Fitting With Strainer
Carburetor Fuel Line Fitting With Strainer
- Fits INTERNATIONAL carburetors: 356948R92, 35865R91, 366066R91, 367258R92, 367259R92, 372723R92, 378196R94, 379813R91, 380956R91, 381984R91, 388297R92, 388424R92, 388425R96, 390082R92, 396197R93, 45108DB, 45108DC, 50981DA, 50981DB, 50983DB, 52714D, 52814DA, 52815D, 52815DA, 533622R91, 53873DF, 53873DH, 539575R91, 56543DE, 60329DA. 1/4 inch pipe to 5/16 inch flare. (Item #: 111514, Ref: 29902DX) $15.00

Farmall M Carburetor Kit
Carburetor Kit
- For International / Farmall tractor models M, Super H, Super M, Super W4, Replaces International OEM number 356948R92, 357231R92, 358065R91, 358554R91, 47387DC, 50983DC, (Item #: 100730) $23.30

Farmall M Carburetor Kit, Basic
Carburetor Kit, Basic
- For M, MV, 6 Dist with OEM# 47387DB and 50983DB. Basic Carburetor Kit. (Item #: 182770, Ref: BK11V) $34.40

Farmall M Carburetor Kit, Basic
Carburetor Kit, Basic
- For M, MV, 6 Dist. with OEM number 47387DB, or with OEM number 50983DB. For Super M, MTA with OEM number 356948R92. For W9, WR9 with OEM number 52814D, 52815D and 60329DA. For 300, 350, 400, 450 all with OEM number 361525R92, 361525R91.: For Super H with OEM# 358065R91 (Item #: 120899, Ref: BK12V) $25.90

Farmall M Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- For tractor models M, MV and 6 Dist. with OEM#47387DB WITH THROTTLE BODY 6513DX. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. (Item #: 112359, Ref: C511V) $57.00

Farmall M Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- For tractor models M, MV and 6 Dist. with OEM#47387DB WITH THROTTLE BODY 8867DX. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. (Item #: 112360, Ref: C512V) $53.00

Farmall M Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- For tractor models M, MV, 6 Dist. with OEM# 50983DB with THROTTLE BODY 6513DX. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. (Item #: 113826, Ref: C513V) $37.98

Farmall M Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- For tractor models M, MV, W6 ALL with IH carb 50983DB with throttle body 8867-DX, 8557D Or 8867D. Contains the following parts for a Major Overhaul with instructions: Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. (Item #: 112358, Ref: C514V) $55.00

Farmall M Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- This Comprehensive Carburetor Kit is used on 47387D, 47387DB, 47387DC, 50983D, 50983DB, 50983DC, 50983DD carburetor with throttle body # 6513D, 6513DX (all with 3.195 inch throttle shaft length). Contains all the parts shown. (Item #: 183876, Ref: R7524) $68.00

Farmall M Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- This Comprehensive Carburetor Kit is used on 47387D, 47387DB, 47387DC, 50983D, 50983DB, 50983DC, 50983DD carburetor w/ throttle body #8557D, 8557DX, 8867D (all with 3.314 inch throttle shaft length). It contains all the parts shown. (Item #: 184414, Ref: R7525) $78.00

Farmall M Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- International number 356948R92, 357231R92, 358065R91, 358554R91, 47387DB with 8557DX body, 50983DB with 8557DX body, 52814D, 52815D, 60329DA. Includes gaskets, needle, seat, and throttle shaft. (Item #: 112361, Ref: IHCK09) $31.40

Farmall M Carburetor, Rebuilt
Carburetor, Rebuilt
- This rebuilt carburetor is a direct replacement for OEM numbers matching: 356948R91. For the following tractor models: M, MTA, 600, W9. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203308, Ref: 1414-CARB) $265.01

Farmall M Carburetor, Rebuilt
Carburetor, Rebuilt
- This rebuilt carburetor is a direct replacement for OEM numbers matching: 47387DB, 47387DC, 50983DB. For the following tractor models: HM, MTA, 600, W9. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203308, Ref: 1415-CARB) $265.01

Farmall M Comprehensive Carburetor Kit
Comprehensive Carburetor Kit
- For tractor models Super M, Super MTA and Super MV. Use with International carburetor number 356948R91, 356948R92, 357231R91, 357231R92 (Item #: 170621, Ref: R7527) $70.00

Farmall M Friction Disc
Friction Disc
- This friction disc is for tractor models H and M. Friction Disc for FTL153 Throttle Assembly. Price shown is for each, sold only in multiples of 5 items. (Item #: 110466, Ref: TD153) $3.60

Farmall M Fuel Cap
Fuel Cap
- For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1/2 inches tall, Triple Baffle Style. Replaces 361910R1, 23995DC (Item #: 108051, Ref: R3654) $25.40

Farmall M Fuel Cap
Fuel Cap
- 1 15/16 inch overall outside diameter fits many: 240, 300, 350, 400, 450, 600, 650, H, HV, M, MD, MDV, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super W6, Super WD6, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Item #: 116503, Ref: 40756D) $3.98

Farmall M Fuel Cap, Chrome, Unvented
Fuel Cap, Chrome, Unvented
- Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Item #: 107987, Ref: 23995DC-CHROME) $9.98

Farmall M Fuel Cap, Top Vented
Fuel Cap, Top Vented
- 2-11/16 inch inside diameter, 1.500 inch height (including splash guard) and 1.118 inch height cap only. Says "Buy Clean Fuel Keep it Clean". For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy (WILL NOT FIT 154, 184, 185), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Item #: 121475, Ref: 12770D) $12.40

Farmall M Fuel Cap, Vented
Fuel Cap, Vented
- For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Item #: 107951, Ref: 23995DA) $12.80

Farmall M Fuel Line
Fuel Line
- For tractor models M, MV serial number 24215 and up, Super M and Super MV. Fuel line, metal pipe from fuel strainer to carburetor with two nuts. Restoration quality. Replaces 56512DX, 58363DX, 60684DX. (Item #: 172777, Ref: 60684DX) $50.00

Farmall M Fuel Pipe Coupling Nut
Fuel Pipe Coupling Nut
- For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, F12, F14, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, Super A, Super C, Super H, Super M, Super W4, TD6, TD9, W4, W6, W12, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 686, 706, 756, 806, 826, 856, 2444, 3514, 3616, Compatible with International Combine (s) 303, 403, 503, 615, 715, Replaces International OEM number 29899D, 700155R11, 700153R11, 1/2"-20 Hi-duty tube fitting, 5/16" O.D., (Item #: 112642) $3.47

Farmall M Fuel Sediment Bowl Assembly
Fuel Sediment Bowl Assembly
- For International / Farmall tractor models F12, F20 (s/n 93064-earlier), F30 (s/n 25889-earlier), H (s/n 50865-earlier), HV (s/n 50865-earlier), M (s/n 24214-earlier), O4 (s/n 1129-eaerlier), O6 (s/n 1316-earlier), Regular (s/n 87182-later), W4 (s/n 1129-eaerlier), W6 (s/n 1316-earlier), W30 (s/n 28534-earlier), W40, Replaces International OEM number 13120D, 13120DA, 13120DB, 17237D, 17237DA, 1/4" NPT Pipe inlet, For 1/4" NPT fitting for a 5/16" line, (Item #: 167070) $81.00

No
Picture
Fuel Strainer Assembly
- For H, M, MD, 460, 560, 660, 656. Fuel Strainer Assembly. Single 1/8" pipe connection. S61581 (Item #: 105393, Ref: I379832R91) $22.00

Farmall M Gas Lever
Gas Lever
- For H, M. Gas Lever Friction Disc and Spring Combination. Easily attaches with 2 bolts. Allows accurate speed control setting. Replacement Spring (HGL5), and Friction Disc (TD153-requires 5) are available. replaces A533166, A51348DAX, A-51348DAX, A 533166 (Item #: 110304, Ref: FTL153) $35.10

Farmall M Gas Line With FTG
Gas Line With FTG
- Buna-N flex gas line. For tractor models 300, 350, 400, H, M, Super H, Super M. Line has 5/16 Inverted Flare Fittings. Additional hardware may be required. Replaces part numbers: 60684D, 58363DX, 56512DX, 56451DX, and 359481R11. (Item #: 115038, Ref: FLM16) $23.10

Farmall M Governor Control Sector
Governor Control Sector
- Governor control sector with pivot pin for tractors: H and HV, Super H and Super HV, M and MV, Super M and Super MV. (Item #: 114409, Ref: 51351DBXA) $74.00

Farmall M Governor Shaft
Governor Shaft
- Governor Throttle Rod To Carburetor. For 400, 450, M, MV, O6, OS6, Super M, Super W6, W400, W450, W6. (Item #: 105379, Ref: 49788DXA) $42.80

Farmall M Insulating Fuel Tank Pad
Insulating Fuel Tank Pad
- For International / Farmall tractor models Hydro 70, Hydro 86, M (s/n FBK24215-later, Gas), MD (s/n FBK24215-later, Gas), Super H (Gas), Super HV (Gas), Super M (Gas), Super MTA (Gas), 240 (Farmall s/n 501-2293, IH s/n 501-6137), 300 (Gas), 330, 340 (Farmall s/n 501-3449, IH s/n 501-3024), 350 (Gas), 404 (Gas), 424 (Gas and Diesel), 444 (Gas and Diesel), 544 (Gas and Diesel), 606 (Gas and Diesel), 666, 686, 706 (Gas and Diesel), 756 (Gas and Diesel), 766 (Gas and Diesel), 826 (Gas and Diesel), Compatible with International Construction and industrial models 2404 (Gas), 2424 (Gas and Diesel), 2444 (Gas and Diesel), 2504 (Gas and Diesel), Replaces Case IH OEM number 60671D, (Item #: 163917) $3.10

Farmall M Lift All Control Rod Spring\ Flat Hold Down Spring
Lift All Control Rod Spring/ Flat Hold Down Spring
- For International / Farmall tractor models H, HV, M, MD, MTA, Super H, Super M, Super MTA, Replaces International OEM number 15137E, (Item #: 126555) $17.10

Farmall M Needle and Seat - International
Needle and Seat - International
- For International / Farmall tractor models I6, I9, M, O6, O9, TD5, TD6, TD9, W6, W9, 400, 450, 650, (Item #: 149811) $31.98

Farmall M Nut - Repair Keyway Throttle Stop Bolt
Nut - Repair Keyway Throttle Stop Bolt
- For International / Farmall tractor models H, HV, M, MD, MTA, Super H, Super M, Replaces International OEM number 86509309, For square tooth throttle assembly / governor control handle, (Item #: 111049) $0.70

Farmall M Precleaner Assembly
Precleaner Assembly
- Complete, glass dust bowl assembly, 2-1/4 inch inside diameter base, just like the original. For tractor models M, MD, Super M, MTA, W6, WD6, I6, O6, ID6, OS6, ODS6, Super WD6, 400, W400, 450, W450. (Item #: 112510, Ref: 59096D) $73.00

Farmall M Precleaner Bowl
Precleaner Bowl
- Glass bowl for pre-cleaner assembly 59095D, 59096D. (Just like the original). Tractors: H, Super H, HV, I4, O4, OS4, W4, Super W4, 300, 350, M, MD, Super M, MTA, W6, WD6, I6, O6, ID6, OS6, ODS6, Super WD6, 400, W400, 450, W450. (Item #: 111710, Ref: 54082D) $7.80

Farmall M Sediment Bowl Assembly
Sediment Bowl Assembly
- Fuel Strainer assembly with 2.25 inch bowl, 1/8 inch pipe thread to fuel line, 3/8 inch pipe to tank for gasoline tractors: H, HV, M, Super M and MTA, O4, OS4, W4, 460, 560, 600, 650, 656, 660, 706, 756, 766, 806, 826, 856. Replacement bowl available as part S.65504. Replaces OEM numbers 358245R91 and 370832R91. (Item #: 105393, Ref: S.61581) $22.00

No
Picture
Sediment Bowl Assembly
- For International / Farmall tractor models M, MD, MDV, MV, 460, 560, 656, 660, 706, 766, 806, 826, 856, 2826, 2856, Replaces International OEM number 358245R91, 362040R91, 370832R91, 61782C91, Replaces OEM number 13194D, 70208205, 70237946, 70239167, 5/8" x 18 Pitch Male Thread, Short Bowl Type, Outside Diameter: 2 1/8", (Item #: 177024) $42.50

Farmall M Sediment Bowl Assembly, Dual Tank
Sediment Bowl Assembly, Dual Tank
- For tractors using two tanks. 3/8 inch pipe inlet, 5/16 inch compression outlets x 2. For tractor models A, B, BN, C, I4, I6, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, (H, HV serial number 50866 and up), (M serial number 24215 and up), (MV serial number 24215 and up), (O4, W4 serial number 1130 and up), (O6 serial number 1317 and up), (W6 serial number 1317 and up) with Distillate or All Fuel. Replaces 370831R91, 51495DD, 58361DAX, IHS713. YOU MAY NEED A 90 DEGREE ELBOW - NOT SUPPLIED BY YESTERDAYS TRACTOR. (Item #: 113653, Ref: 17215DA) $70.00

Farmall M Sediment Bowl Gasket and Screen
Sediment Bowl Gasket and Screen
- This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. (Item #: 105364, Ref: 49923D) $3.30

Farmall M Throttle Dog
Throttle Dog
- This Throttle Dog is used with square tooth throttle assembly/ governor control handle. Replaces 361245R1 (Item #: 110950, Ref: 361245R1) $7.40

Farmall M Throttle \ Governor Control Spring
Throttle / Governor Control Spring
- This Throttle Lever Spring Fits: H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MV. Measures 1.322 inch overall length, 0.925 Inch Outside Diameter. This is used one stamped steel throttle lever assemblies, not cast iron ones. Replaces: 51349D (Item #: 179413, Ref: 51349D) $6.70

Farmall M Throttle Plate Assembly
Throttle Plate Assembly
- This is a Square Tooth Throttle Control Assembly (Governor Control Assembly) used on H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA. Replaces: Handle: 361244R11, Sector: 361246R11, Assembly: 366727R91 (Item #: 114409, Ref: 366727R91) $74.00

Farmall M Throttle Plate Assembly
Throttle Plate Assembly
- H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA; Replaces: Saw tooth Lever: 51348DAX, Saw tooth sector: 51351DBX, 51351DBXA (Item #: 114409, Ref: 51351DBX) $74.00

Farmall M Throttle Plate Assembly
Throttle Plate Assembly
- Saw-Tooth Style For H, M (Item #: 114409, Ref: R2709) $74.00

Farmall M Throttle Shaft
Throttle Shaft
- For International / Farmall tractor models I6, M, O6, W6, Replaces International OEM number 47389DAX, 47389DX, 50983DA, 50983DB, 50983DC, 50983DD, (Item #: 126750) $16.40

Farmall M Throttle Spring
Throttle Spring
- Replacement Spring for FTL153 Throttle Assembly. (Item #: 110465, Ref: HGL5) $6.00

Gaskets
Farmall M Push Rod Side Cover Gasket
Push Rod Side Cover Gasket
- Replacing OEM part numbers 49029DA, 49029DB this gasket is used on Gas and LP models: M, I6, Super MVTA, MTA, MV6, OS6, Super M, Super MTA, Super MV, Super W6, Super W6TA, W6, 400, 450 (Item #: 154785, Ref: 49029DA) $18.00

Gauges
Farmall M Amp gauge
Amp gauge
- Gauge, ammeter has 20-0-20 range. Not Exactly like original. IH Logo. Fits 2 inch diameter hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418. (Item #: 102133, Ref: 354473R91) $20.70

Farmall M Amp Gauge
Amp Gauge
- 20-20 style - with IHC Logo. For A, B, C, H, M, W-4, W-6, W-9 (to 1946). (Item #: 121653, Ref: R4186) $30.00

Farmall M Amp Gauge
Amp Gauge
- D-O-C Style - with IH Logo For Super A, Super C, H, Super H, M, Super M, Super MTA, Cub (From 1955), W4, W6, 200, 230, 240, 300, 350, 400, 450. Replaces 393334R91, 378424R91, 360053R92, IHS395. (Item #: 102132, Ref: 360053R91) $21.50

Farmall M Amp Gauge, Original Style
Amp Gauge, Original Style
- Gauge, ammeter has 20-0-20 range. Original Style. IH Logo. Fits 2 inch diameter hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418, 354473R91 (Item #: 121652, Ref: 354473R91OE) $29.74

Farmall M Fuel Gauge Cap
Fuel Gauge Cap
- This vented fuel cap has a built in gauge. Overall length is 14 3/4 inches. Uses gasket part number 23977DA - sold separately. For models I6, M, MD, MDV, MV, O6, Super M, Super MD, Super MDV, Super MTA (Diesel), Super MV, Super W6, Super WD6, W6, WD6. (Item #: 160451, Ref: 365499R91) $128.00

No
Picture
Fuel Gauge Cap Gasket
- Gasket fits our Fuel Gauge Cap part numbers 365498R91, 365495R91 and 365499R91. (Item #: 110635, Ref: 43984D) $3.00

Farmall M Oil Gauge
Oil Gauge
- Oil pressure gauge, 80 pound, fits 2 inch diameter hole. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, W4, 400, W6, W9, A, B, C, H, M, Super C, Super W9, Super A. Replaces 536962R1, 536962R2. (Item #: 110411, Ref: FAD9273A) $14.50

Farmall M Oil Gauge
Oil Gauge
- For all IHC and Farmall tractors up to 1946. Oil Pressure Gauge with color read (no numbers on face). IHC logo on face. Screws directly into block. (Item #: 113563, Ref: 43987DB) $41.20

Farmall M Oil Pressure Gauge
Oil Pressure Gauge
- For International / Farmall tractor models B, C, H, M, Super A, Super C, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, Replaces International OEM number 43987DBH, 0-45 PSI, Includes Mounting Studs, (Item #: 102136) $18.30

Farmall M Oil Pressure Gauge
Oil Pressure Gauge
- For International / Farmall tractor models H, I4, I6, I9, M, O4, O6, O9, W4, W6, W9, Replaces International OEM number 31041DBH, IHC Logo on Face, Black Face, Includes Mounting Studs, (Item #: 108049) $18.70

Farmall M Oil Pressure Gauge
Oil Pressure Gauge
- For International / Farmall tractor models I6, M, Super M, Super MTA, Super W6, Super W9, TD6, TD9, W6, W9, Replaces International OEM number 258634R91, 702027C1, IH Logo on Face, Dash Mounted, 0-45 PSI, (Item #: 121660) $47.00

Farmall M Oil Pressure Gauge
Oil Pressure Gauge
- Zone Style - with IH Logo with studs - Does not include bracket. For H, Super H, M, Super M, Super MTA, W-4, Super W4, W-6, Super W6, W-9, Super W9 (from 1947). (Item #: 110849, Ref: 41934DB) $45.20

Farmall M Temperature Gauge
Temperature Gauge
- For International / Farmall tractor models B, C, H, M, Super A, Super C, Super H, Super M, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, Replaces International OEM number 67135D, Lead Length: 4', For a temperature gauge with a 6' lead use 108050, For a temperature gauge with a 8' lead use 118328, (Item #: 108055) $37.90

Farmall M Temperature Gauge
Temperature Gauge
- For International / Farmall tractor models B, C, H, M, Super A, Super C, Super H, Super M, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, Replaces International OEM number 370259RH, Lead Length: 8', For a temperature gauge with a 4' lead use 108055, For a temperature gauge with a 6' lead use 108050, (Item #: 118328) $31.00

Farmall M Water Temperature Gauge
Water Temperature Gauge
- For A, B, H, M, W-4, W-6, W-9 all to 1946. Water Temperature Gauge with 19 inch lead, "IHC" Logo. (R3695) (Item #: 102128, Ref: 63783D) $40.00

Farmall M Water Temperature Gauge with IH Logo
Water Temperature Gauge with IH Logo
- TEMPERATURE GAUGE WITH 19 inch LEAD and IH Logo. FITS MODELS A, H, M, Super A, Super M, Super MTA (300, 350 UTILITY). Fitting may require the OEM Adapter 51510D which we do not have available. (Item #: 111254, Ref: 67135D) $66.64

Hitch / Drawbar
Farmall M 3 Point Conversion Kit
3 Point Conversion Kit
- For M, MTA, Super M, Super MTA, MD, 400, 450, 460, 504, and 560 also for 544 and 656 with spacer #861188. Two hydraulic cylinders included. (Order optional bracket #861190 to use swinging drawbar) Cat. I/II Weight is 260Lbs. Note: HK-11062 is similar to the picture shown but has two cylinder locations. (Item #: 111430, Ref: HK11062) $956.00

No
Picture
3 Point Hitch Conversion Kit
- For International / Farmall tractor models M, 460, 560, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 171564) $689.98

Farmall M Drawbar Brace Rod
Drawbar Brace Rod
- For International / Farmall tractor models H (s/n 36680-later), M (s/n 21091-later), Super H, Super M, 300, 340, 350, 400, 450, 460, 544, 656, 664, 666, Replaces International OEM number 57233DA, Forged, 17-1/4" C.C. hole, (Item #: 126337) $65.00

Farmall M Drawbar Brace Rod
Drawbar Brace Rod
- For International / Farmall tractor models H (s/n 501-36679), M (s/n 501-21090), MD, Replaces International OEM number 41119D, Forged, 18-1/2" C.C. hole, (Item #: 126338) $70.00

Farmall M Drawbar Pin, Front
Drawbar Pin, Front
- For tractor models with swinging drawbar, 400, 450, 560, 660, M, MD, Super M, Super MD. (Item #: 112536, Ref: 58657DA) $18.15

Farmall M Drawbar Pin Retainer Plate
Drawbar Pin Retainer Plate
- Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Item #: 112643, Ref: 49139D) $7.50

Farmall M Drawbar Roller
Drawbar Roller
- For tractor models H, Super H, M, Super M, 300, 330. Replace 356563R93 (Item #: 111251, Ref: R0910) $64.00

Farmall M Drawbar Strap
Drawbar Strap
- For tractor models H, Super H, M, Super M, 300, 350. (Item #: 110900, Ref: 45184DA) $76.00

Farmall M Straight Swinging Drawbar
Straight Swinging Drawbar
- For International / Farmall tractor model M, Replaces International OEM number 49200DB, 3/4"-2-1/2", Additional Handling and Oversize Fees Apply To This Item, (Item #: 126733) $221.58

Farmall M Swinging Drawbar
Swinging Drawbar
- For tractor models M, MD, Super M, Super MD. Swinging Drawbar. Dimensions: 1 inch thick, 52-1/4 inches center to center. (Item #: 111395, Ref: 357529R1) $200.00

Farmall M Swinging Drawbar Pin
Swinging Drawbar Pin
- For tractor models H, Super H, M, Super M, 300, 330, 340, 350, 400, 450, 460, 560, 660. (Item #: 109900, Ref: FOH450) $55.00

Farmall M Swinging Drawbar Roller Shaft Support
Swinging Drawbar Roller Shaft Support
- For International / Farmall tractor models H, HV, M, MD, MTA, Super H, Super HV, Super M, Super MTA, Replaces International OEM number 356653R91, (Item #: 126738) $64.00

Farmall M Three Point Hitch
Three Point Hitch
- This 3-point hitch kit fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar. Kit includes (Cat # 1 on tractor end and Cat # 2 on equipment end, and 2 hydraulic 2 way cylinders, but does not include hoses. Please note, this hitch exceeds size limitations for UPS. This hitch kit must ship via LTL freight truck. (Item #: 1000051, Ref: IHS3009) $1799.99

Hydraulic System
Farmall M Hydraulic Auxiliary Control Valve Rod
Hydraulic Auxiliary Control Valve Rod
- Hydraulic Auxiliary Control Valve Control Rod is 43-1/2 inches long with a 3/8 inch diameter. It fits the following tractors with optional live hydraulics and auxiliary control valve: M, MD, MDV, MTA, MV, Super M, Super MD, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super MTA. It replaces original part number 359479R91 (Item #: 179699, Ref: 359479R91) $41.00

Farmall M Hydraulic Dipstick
Hydraulic Dipstick
- Mounts inside the hydraulic pump breather fill pipe, 11.80 inches long. For tractor models H, HV, M, MV, MD, MDV, Super H, Super HV, Super M, Super MV, Super MD, Super MDV, 140 Combine and 120 Windrower. All equipped with lift all countershaft driven hydraulic pump. (Item #: 126480, Ref: 15158EX) $31.40

Farmall M Hydraulic Manifold
Hydraulic Manifold
- Hydraulic Pump Flange, Hydraulic Manifold, Port Block is used on (M, Super M, 400, 450 Gas or Diesel), Super W6, Super W9, Super WD6, Super WD9, W6, W9, WD6, WD9, 600, 650. 3/4 inch NPT inlet and outlet. Threaded for hydraulic hose. Must use rubber hose lines. (Item #: 115188, Ref: IHS1240) $71.00

Farmall M Hydraulic Pump Control Rod
Hydraulic Pump Control Rod
- Hydraulic Pump Control Rod is used on the following tractors with belly mounted hydraulic pumps: M, MD, MDV, MV, Super M, Super MD, Super MDV, Super MV. The length of this rod is 39-3/4 inches long with a 3/8 inch diameter. It replaces original part number 15092EX (Item #: 179211, Ref: 15092EX) $44.20

Farmall M Seal, Countershaft Driven Hydraulic Pump
Seal, Countershaft Driven Hydraulic Pump
- This Seal is used as a countershaft driven hydraulic pump seal or a hydro charge pump seal on Farmall / International: H, M, HV, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV, Hydro 86, Super MV, 544, 656, 666, 2544. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779) $7.70

Lights
Farmall M Headlight Assembly, Flat Back, 12 Volt
Headlight Assembly, Flat Back, 12 Volt
- For Farmall Cub, Cub Lo-Boy, C, Super C After 159455, M, MV, MD, MDV, MTA, Super MD, Super MDV. Also for Model 100, 130, 140, 200, 230, 240, 300, 350 Utility, 330, 340, 400, 450. Replaces OEM# 357884R94. Flat-Back (not teardrop) Primered red. Price is for one complete headlamp assembly. (Item #: 105334, Ref: 357884R91-12V) $48.00

Farmall M Headlight Assembly, Flat Back - 6 Volt
Headlight Assembly, Flat Back - 6 Volt
- For Farmall Cub, Cub Lo-Boy, C, Super C after serial number 159455, M, MV, MD, MDV, MTA, Super MD, Super MDV, also for Model 100, 130, 140, 200, 230, 240, 300, 350 Utility, 330, 340, 400, 450. Replaces OEM number 357884R94. Flat-Back (not teardrop). Primered red. Price is for one complete headlamp assembly. (Item #: 105333, Ref: 357884R91-6V) $40.50

Farmall M Headlight Lens
Headlight Lens
- Replacement Glass Lens is 4.75 inch outside diameter for IH (45640DB) Headlight Assemblies. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, W4, W6, W9, WD6, WD9. (Item #: 111330, Ref: GC200) $15.30

No
Picture
Headlight Lens
- For tractor models 100, 130, 140, 200, 230, 240, 300, 350, Farmall 300, 350 Utility, 330, 340, IH and Utility 240, 400, 450, Farmall Cub, Cub Lo-Boy, Farmall C, M, MV, MD, MDV, Super MD, Super MDV. (Item #: 179183, Ref: 357884R94) $14.70

Farmall M Headlight Lens Gasket
Headlight Lens Gasket
- Gasket, 4 5/8 outside diameter for lens in sealed beam units 358890R92. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 110589, Ref: 358892R91) $6.80

Farmall M Headlight Reflector
Headlight Reflector
- Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: Cub up to serial number 165152, Super C up to serial number 159454, TD with bulb style light, (Super WDR9, WD9 up to serial number 1041), W6 up to serial number 3950, (Super H, Super HV up to serial number 19233), ( Super AV, Super A, W4 all early up to 1953), (Super M, Super MD up to serial number F28174 and Louisville built up to serial number L504508), A, B, C, H, M, I4, I6, I9, ID6, ID9, AV, BN, MDV, MTA, MV, TD6, W9, O4, WR9, O6, ODS6, OS4, OS6, Super MD, Super MTS, Super W4, WD6, WR9S. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00

Farmall M Headlight Reflector - 4 inch
Headlight Reflector - 4 inch
- This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 185606, Ref: S.02377) $10.40

Farmall M Headlight Support
Headlight Support
- For H, Super H, M, Super M, Super MTA (Item #: 105337, Ref: R4156) $107.10

Farmall M Headlight Support Bracket
Headlight Support Bracket
- For H, Super H, M, Super M, Super MTA. Headlight Support Bracket. (4156R) (Item #: 105337, Ref: 51675DC) $107.10

Farmall M Headlight Trim Ring
Headlight Trim Ring
- Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For tractor models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Item #: 112980, Ref: 53525DA) $19.85

Farmall M Knob
Knob
- Knob for combination rear light and tail light switch (used only with switch body with 15/32 inch shaft). For tractor models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Item #: 179762, Ref: 359773R91) $8.72

Farmall M Light Clamp
Light Clamp
- Clamp, lamp assembly for tractors. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W6, Super A, W4, W6, W9, WD6, WD9. (Item #: 178025, Ref: 350920R1) $10.00

Farmall M Light Switch, 12 Volt
Light Switch, 12 Volt
- 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 125672, Ref: R5362) $47.60

Farmall M Light Switch, 12 Volt
Light Switch, 12 Volt
- 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107984, Ref: R5364) $35.98

Farmall M Light Switch, 12 Volt
Light Switch, 12 Volt
- 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178354, Ref: R5366) $60.00

Farmall M Light Switch, 12 Volt
Light Switch, 12 Volt
- 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107095, Ref: R5368) $40.00

Farmall M Light Switch, 6 Volt
Light Switch, 6 Volt
- 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178387, Ref: R5361) $60.00

Farmall M Light Switch, 6 Volt
Light Switch, 6 Volt
- 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 125715, Ref: R5363) $51.00

Farmall M Light Switch, 6 Volt
Light Switch, 6 Volt
- 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178351, Ref: R5365) $35.98

No
Picture
Light Switch, 6 Volt
- 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107094, Ref: R5367) $27.00

Farmall M Light Switch Knob
Light Switch Knob
- Old style for rotary light switches. For tractor models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Item #: 179711, Ref: 57313D) $10.80

Farmall M Rear Combo Light
Rear Combo Light
- 6 Volt Rear Combo Light Assembly with Red Jewel Light with rotary switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. Replaces 355914R91. (Item #: 105335, Ref: 355911R91) $73.00

Farmall M Rear Combo Light Assembly -6Volt
Rear Combo Light Assembly -6Volt
- Replaces 355911R91, manufactured to restoration standards. Rear combo light assembly, 6 Volt. Includes red jewel light with rotary switch. For: Cub, Super A and AV, C, Super C, H, HV, Super H and HV, M, MD, MDV, MV, Super M and MTA, O4, o6, ODS6, OS6, W6, WD6, W6TA, Super W6, W9, WDR9, WR9, Super W9, 100, 130, 140, 230, 240, 300, 330, 340, 350, 400, 450. (Item #: 105335, Ref: 355914R91-6V) $73.00

No
Picture
Rotary Light Switch. Early
- This 4 position, 6 volt light switch is for models with CUT OUT RELAY, not a voltage regulator. Cut our telays have 2 terminals on one side and 1 terminal on the other. Voltage regulators have 3 terminals on 1 side and 1 terminal on the other. OFF is a position (of the 4). For models A, AV, B, H, M, MV, O4, O6, OS4, OS6, W4, W6, WR9, C, Cub, HV, W9, WD6, WD9. Replaces 57310DX, 57310DY and 1994019. (Item #: 126644, Ref: 47890DX) $135.00

Farmall M Sealed Beam 6 Volt
Sealed Beam 6 Volt
- Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. Bulb measures 4.375 inches outside diameter. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR9. Verify dimensions. (Item #: 111938, Ref: 358890R92-6V) $42.00

Farmall M Sealed Beam Assembly
Sealed Beam Assembly
- 6 Volt For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240. (Item #: 105333, Ref: R2714) $40.50

Farmall M Sealed Beam Bulb 12 Volt
Sealed Beam Bulb 12 Volt
- Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. This is a 12 volt sealed beam unit. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR6, WDR9. Replaces 358893R92, 358893R91 (Item #: 161211, Ref: 358890R92-12V) $62.00

Farmall M Sealed Beam Bulb, Red and White
Sealed Beam Bulb, Red and White
- 4.5 inch diameter, 12 volt. For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. (Item #: 116014, Ref: 371461R92) $23.60

Farmall M Switch, Worklight, with Knob
Switch, Worklight, with Knob
- For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. Replaces 359682R91. (Item #: 185566, Ref: 375653R92) $17.70

Farmall M Tail Light Lens
Tail Light Lens
- 5 inch lens, combination rear light and tail light. For 100, 130, 200, 230, 300, 340, 350, A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A.350478R1 (Item #: 111330, Ref: GC200) $15.30

Oil System
Farmall M Oil Filler Cap
Oil Filler Cap
- This Oil Fill Cap does not come with hardware or gasket. We do not have those parts available. For tractor models 300, 350, 400, 450, H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MTA. (Item #: 126605, Ref: 4819DX) $15.00

Farmall M Oil Filter
Oil Filter
- Oil filter element, cartridge type with gasket. For gas engines: C113, C152, C248, C264, C281, Element is 3 7/16 inches in diameter and 7 1/2 inch overall length. Replaces: 355010R91, 360431R91, 376375R91, 63858D (Item #: 111121, Ref: 376375R91) $21.00

Farmall M Oil Filter
Oil Filter
- Oil filter element, cartridge type with gasket. For gas engines: C248, C335, C350, in tractors: M and MV to serial number 59393, I6 and W6 to serial number 4242, W9, 600, 650. For diesel engines D248, D264, D281, D335, D350, tractors: MD, Super MD, ODS6, WD6, Super WD6, For 400, 4252, 450, 6, 600, 650, M, MD, MV, ODS6, Super MD, Super WD6, Super WD9, W6, W9, WD6, WD9. Filter is 3 7/8 inches in diameter and 7 inches overall length. Replaces: 376376R91, 257867R92, 360432R91, 63884D, 63885D. (Item #: 185572, Ref: 376376R91) $22.00

Farmall M Oil Filter, Spin-On
Oil Filter, Spin-On
- For tractors that have been converted from cartridge type to spin on oil filters. (Item #: 118399, Ref: E7NN6714AA) $14.20

Farmall M Oil Level Indicator
Oil Level Indicator
- This oil level indicator is a replacement for the oil level petcock. Remove the original petcock and replace with this conversion. Has 3/8 inch NPT male fitting. Dipstick is 4.91 inches long. For models using the original oil petcock in A, AV, B, BN, C, F12, F14, F20, F30, H, HV, I12, I14, I4, I6, M, MTA, MV, O12, O14, O4, O6, OS4, Regular, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, W12, W14, W30, W4, W6, 10-20, 15-30, 22-36 and early models of 350, 400, W400, W450 used to replace top oil checking petcock. Originally used as an aftermarket product in the 1940's. (Item #: 1998TA-New) $46.50

Farmall M Oil Level Petcock
Oil Level Petcock
- This oil level indicator system uses 2 petcock valves. Used on models A, AV, BN, C, F12, F14, F20, F30, H, HV, M, MTA, MV, Regular, Super A, Super AV, Super C, Super H, Super M, Super MV, 300, 400, Super MTA, Super W4, Super W6 and some other early IH and McCormick Deering models. McCormick Deering: 10-20, 15-30, 22-36. 3/8" pipe thread. Two used per tractor, sold individually. Replaces 1998TA, OGC200 (Item #: 126590, Ref: 1998TA) $16.90

Farmall M Oil Pan Drain Plug
Oil Pan Drain Plug
- White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Order EBU6734A if washer is needed. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10

Farmall M Oil Pan Drain Plug Washer
Oil Pan Drain Plug Washer
- This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.70

Farmall M Oil Pressure Gauge
Oil Pressure Gauge
- Zone Style - with IHC Logo with Studs For H, M, W-4, W-6, W-9 (To 1946) (Item #: 113566, Ref: R2737) $26.98

Farmall M Spin On Oil Filter Adapter Kit
Spin On Oil Filter Adapter Kit
- This Spin On Oil Filter Adapter Kit Fits all Gas and LP, IH Combines: 105, 122, 140, 203, 62, 64, 76, 91, 93. Industrials: (I4, I6 Serial Number 4253 and up). Tractors: 300, 350, 400, 450, (A without hydraulics), B, BN, H, HV, (M, MV Serial Number 595394 and up), MTA, O4, (O6, W6 Serial Number 4253 and up), OS4, OS6, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, (T6, U6 Serial Number 5455 and up) ], (T6-61, U164, U4, UC248 Serial number 2327 and up), W4, W400, W450; For Replacement filter, order E7NN6714AA. Replaces: 538829R91 (Item #: 166373, Ref: 538829R91KIT) $123.00

PTO / Driveline
Farmall M PTO Bearing
PTO Bearing
- This bearing measures 1.575 inches (40.005 mm) inside diameter, 3.150 inches (80.010 mm) outside diameter, and 0.709 inches (18.008 mm) wide. It replaces D83012, B18215, DANA070HD100, H437897, H4628S, H4625S, H4626S, H4627S, K3660223431, L33908, SBA326040030, P39642, ST215, 0000140211, 0040040, 1103566C91, 114085, 130029H1, 151901206, 190001311024, 190003311024, 190003313025, 192310210025, 1963034C1, 199012290707, 20915780, 2359180, 2521A415, 294714R91, 301164, 3146251R91, 325046C91, 339818X1, 340401140, 41618500, 47109308, 47110555, 47123219, S69425, 6208, 700524R91, 700526R91, 70066742, 700803429, 704772R91, 704772R92, 707805203, 713564R91, 80114085, 80301164, 81878507, 83962320, 87605894, 920096050, 9964942 (Item #: 111675, Ref: ST215) $48.98

Farmall M PTO Safety Shield
PTO Safety Shield
- For M, MD, Super M, Super MTA. PTO Safety Shield. (Item #: 103972, Ref: 66424DBX) $70.00

Farmall M PTO Seal
PTO Seal
- Measures 1.306 inch inside diameter, 2.220 inch outside diameter. THIS SEAL IS .312 InchES WIDE. VERIFY THE WIDTH OF YOUR OLD SEAL. YOU NEED TO INSTALL 2 OF THESE IF YOUR OLD SEAL IS WIDER. For tractor models Super A, H after serial number 118000, (M, MD, Super M, Super MTA and Super MD after serial number 59957), Late W4, W6, W9, Super W4, Super W6, Super W9, B250, B275, B414; Also fits the following models with transmission driven PTO (not Live PTO): MTA, 300, 330, 350, 354, 364, 384, 400, 424, 434, 444, 450, 454, 544, 600, 650, 2300, 3414, 3514, 3616. Replaces 3065217R91, 358772R91, 358812R91, 50702D, 372394R91, S90957, 708107R91. (Item #: 114730, Ref: 45702D) $9.80

No
Picture
PTO Shaft Guard
- PTO Shaft Guard attaches with a hose clamp that can be purchased locally. For A, B, Super A, Super AV, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 504, 544, 606 and with transmission driven type tractors: 330, 330, 350, 400, 450. PTO safety guard. (Item #: 103975, Ref: 51484DX) $18.70

No
Picture
Pto Shield
- For M, Super M, Super MTA (Item #: 103972, Ref: R2658) $70.00

Seats
Farmall M Pan Seat 4-Bolt Mount
Pan Seat 4-Bolt Mount
- Pan Seat with silver padded canvas. Center brass drain hole over metal pan seat frame. For: C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 3 50, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Item #: 110069, Ref: R0906) $212.00

Farmall M Pan Seat 4-Bolt Mount
Pan Seat 4-Bolt Mount
- Pan Seat with a red and white vinyl cover measures 22 inches wide and 19 inches long. For C, Super C, Super H, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Item #: 101244, Ref: 357518R91) $160.00

Farmall M Pan Seat 4-Bolt Mount
Pan Seat 4-Bolt Mount
- Black vinyl padded cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Item #: 101245, Ref: R0903) $213.00

Farmall M Pan Seat with Slide on Seat Bottom
Pan Seat with Slide on Seat Bottom
- RED AND WHITE Vinyl Pan Seat with flip over seat with slotted slide on seat bottom. For Early Models H, M. (Item #: 182879, Ref: 49498DD) $316.44

Farmall M Pan Seat with Slide on Seat Bottom
Pan Seat with Slide on Seat Bottom
- Silver Vinyl Pan Seat with flip over seat with slotted slide on seat bottom. For Early Models H, M. (Item #: 182889, Ref: 49498DD_SILVER) $316.44

No
Picture
Seat Custom with Fold Up Arms
- Black vinyl assy. with fold up arm rests fits, 1030, 1031, 1032, 1070, 1175, 1190, 1200TK, 1290, 1390, 1470TK, 200, 230, 240, 2504, 300, 330, 340, 350, 400, 404, 450, 460, 480B, 503, 504, 560, 580B, 600, 606, 650, 660, 730, 740, 830, 840, 870, 930, 940. MUST USE ADAPTER FOR FOLLOWING MODELS, A, B, C, H, HV, M, MDV, MD, MV, Super H, Super A, Super M, W9, WD9, WDR9, WR9S. (USE ADAPTER # CSA300). (Item #: 101387, Ref: CS108-1V) $116.00

Farmall M Seat Hinge Pin
Seat Hinge Pin
- Pin, hinge for tilt back seat bracket. Pin is 7 inches long and 3/8 inch diameter. Tractors: C, Super C, H and HV, Super H and HV~ M and MD, Super M and MTA~ Super W6 and W6TA~ 200, 230, 300, 340, 350, 400, 450, 560, 660. For 200, 230, 300, 340, 350, 400, 450, 460, 560, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super HV, Super M, Super MD, Super W6, W6TA. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. Replaces: Washer: 228280, Pin: 356892R2, Clip: 356893R2 (Item #: 179249, Ref: 356892R2) $11.80

Farmall M Seat Pan
Seat Pan
- Steel Black vinyl without drain hole Fits tractor models, 100, 140, 200, 230, 240, 300, 340, 350, 460 DSL, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTD, MV, Super H, Super M, W9, WD9, WDR9, WR9S (Item #: 191059, Ref: 357518R92-1) $205.00

No
Picture
Seat Pan
- Steel Silver vinyl Fits Models, 100, 140, 200, 230, 240, 300, 340, 350, 460 DSL, 600, 650, A, AV, B, C, H, HV, M, MD, MDV, MTD, MV, Super H, Super M, W9, WD9, WDR9, WR9S. (Item #: 101246, Ref: 357518R92-18) $148.00

Farmall M Seat Pivot Support Rod
Seat Pivot Support Rod
- This Seat Pivot Support Rod is 3 1/2 inches in length. Includes machine washers, rubber bushings, bolts and lock washers. (Item #: 105343, Ref: 355753R1) $19.90

Farmall M Seat Shock
Seat Shock
- With Two Bolt Holes 7 1/4 When Compressed For C, Super C, Super H, M, Super M, Super MTA, 200, 230, 300, 350, 400, 450 with Mid Mounted Shock (Item #: 105340, Ref: R3700) $40.00

Farmall M Seat Shock Bushing
Seat Shock Bushing
- This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Farmall M Seat Shock, Mid Mount
Seat Shock, Mid Mount
- With one bolt hole and one stud 7 1/4 inch when compressed. For H (from serial number 281556), M (from serial number 165271), Super M, Super MTA with mid mounted shock. Replaces R3702, IHS465. (Item #: 105341, Ref: 353204R93) $40.60

Farmall M Seat Shock, Mid Mount
Seat Shock, Mid Mount
- For tractor models: C, Super C, Super H, and Super H. All serial number 19234 and up; M, MD, MDV, Super MDV, Super MD, 200, 230, 300, 350, 400, 450, 460, 560. Shock absorber for mid mounted shock is 7 1/4 inches from center-to-center compressed length. Replaces IHS347, 361033R91. (Item #: 105340, Ref: 351750R93) $40.00

Farmall M Seat Shocks - Rear Mount
Seat Shocks - Rear Mount
- For H and HV with serial number 15698 to 281555; M, MD, MDV, Super MD and Super MDV with serial number 9287 to 165270. Rear Mount Seat Shocks are 11 1/2 inch center to center compressed length. Replaces IHS329. (Item #: 105339, Ref: 352587R92) $29.98

Farmall M Seat Spring
Seat Spring
- Cone Shape SPRING Measures 13 inches tall and 8.5 inches at base. For tractor models 200, 230, 300, 350, 400, 450, 460, 560, 600, 650, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super M, Super MTA. Replaces IHS030. (Item #: 101283, Ref: 354670R2) $26.90

Farmall M Seat Support Pivot Rod
Seat Support Pivot Rod
- Rod that fits in the end of the Seat Support. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. (Item #: 105344, Ref: 352648R1) $22.30

Sheet Metal / Body Parts
Farmall M Battery Box Cover
Battery Box Cover
- Bare Metal-unpainted. For tractor models M, Super M, MD, Super MD, Super MTA Battery Box Cover. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104013, Ref: 51713DBX) $36.30

Farmall M Battery Box with Cover
Battery Box with Cover
- For tractor models M, MD, Super M, Super MD. Battery Box with cover, under tank location. Replaces 51707D and 51713DBX_. Inside dimensions are 7 3/16 inches wide, 9 1/8 inches tall, 11 3/4 inches long. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 109383, Ref: 51707D) $46.26

Farmall M Battery Hold Down Rubber
Battery Hold Down Rubber
- The battery hold down rubber is3/4 inches tall, inserts into the retainers in the battery box lid. These are sold EACH. For tractor models Cub, Cub Lo-Boy, A, AV, B, (BN, C 51690D), AI, H, HV, M, MV, MD, MDV, W6, W9, WD6, Super A, Super C, Super H, Super HV, Super M, Super MTA, Super W6, 100, 130, 140, 200, 230, 600, 650. Replaces: 51690D. (Item #: 116587, Ref: R5103) $4.80

Farmall M Fender
Fender
- For Farmall H, Super H, M, Super M, Super MTA and 300, 350, 400, 450. This fender fits either left or right side. You must order two for a complete set. Mounting Plate and Spacer sold seperately. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103988, Ref: 51500DB) $132.00

Farmall M Fender Extension Mounting Kit
Fender Extension Mounting Kit
- One kit used per tractor. For tractor models H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDTA, O4, Super W4, W6, WD6, Super W6, Super W6TA, W9, WD9, Super WD9, 100, 130, 140, 400, 230, 240, 300, 330, 340, 350, 400, 450. Fender mounting Kit includes 2 fender flat brackets with (34 Pieces) all mounting hardware. Replaces IHS364. (Item #: 103989, Ref: 8000072) $93.00

Farmall M Fender Mounting Plate
Fender Mounting Plate
- For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA and 300, 350, 400, 450. This fender mounting plate fits either left or right side. You must order two for a complete set/1 tractor. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 170252, Ref: 51500PL) $32.00

Farmall M Fender Mounting Spacers
Fender Mounting Spacers
- For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA and 300, 350, 400, 450. This fender mounting spacer fits either left or right side. Price is for each, must be ordered in multiples of 4. (Item #: 122092, Ref: 51502D) $4.00

No
Picture
Grille Screen
- For International / Farmall tractor models A, B, C, Cub (s/n 222500-earlier with round hood / grille), Cub Lo-Boy (s/n 17200-earlier with round hood / grille), H, HV, I4, I6, I9, M, MD, MTA, O4, O6, O9, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MTA, W4, W6, W9, 100, 130, 140 (s/n 23300-earlier), 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 560, 600, 650, 660, Size: 2' x 3' with 5 squares per inch, Wire Grille Screen Clips use Item #: 108001, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112471) $23.10

Farmall M Grill Screen
Grill Screen
- Original 3/16 inch wire mesh sheet. Each 24 inch x 36 inch, sheet is made of original thickness wire and includes clips. Cut sheet to appropriate grill screen size for your tractor. For Farmall models A thru 450. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 183867, Ref: R4476) $37.20

Farmall M Lower Grill Insert With Screen
Lower Grill Insert With Screen
- For M, Super M, MV, MD, MDV, Super MTA. Lower Grill Insert With Screen replaces . (Item #: 103940, Ref: 50204DXA) $40.90

Farmall M Toolbox
Toolbox
- Light bar mount, includes decals and brackets. For tractor models H, M, MD, MTA, Super H, Super M, Super MD, Super MTA (Item #: 103984, Ref: 999760R91) $117.15

Farmall M Wire Grille Screen Clips - 6 pack
Wire Grille Screen Clips - 6 pack
- For International / Farmall tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, Super W4, Super W6, Super W9, Sold in packs of 6, (Item #: 108001) $8.00

Steering
Farmall M Axle
Axle
- Heavy duty main axle assembly includes bushings. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. Additonal $45 shipping due to weight. (Item #: 120010, Ref: 7453) $976.00

No
Picture
Axle Carrier, Used
- For International tractor models M, MD, Super M, Super MTA, 300, 350, 400, 450, 560, Replaces International OEM nos 6727DBXA, Replaces International Casting nos 6727DB, Except HI-Clearance Models, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444996) $46.01

Farmall M Axle Center Tube
Axle Center Tube
- For all models listed with factory IH wide front with tie rods behind center tube: H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, 1026, 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 666, 706, 756, 806, 826, 856 Axle Center Tube with bushings (48841D) is 42 1/2 inches long and 4 1/2 inches in diameter. Replaces: 358976R31, 383926R21, Bushing: 48841D (Item #: 109489, Ref: 358976R31) $462.00

Farmall M Axle Clamp, Front, Used
Axle Clamp, Front, Used
- For International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, MTA, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM nos 350556R1, Front Axle Clamp, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434540) $31.01

No
Picture
Axle Extension Tube
- Standard duty, 11-5/8". For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108809, Ref: 3036) $206.98

No
Picture
Axle Extension Tube
- schwartz part (Item #: 110830, Ref: 3037) $168.98

Farmall M Axle Extension Tube, Heavy Duty
Axle Extension Tube, Heavy Duty
- For Schwartz aftermarket front end. 11-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 111582, Ref: 7465) $343.00

Farmall M Axle Extension Tube, Heavy Duty
Axle Extension Tube, Heavy Duty
- For Schwartz aftermarket front end. 9-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 172645, Ref: 7470) $406.00

Farmall M Axle Pivot Pin Bushing
Axle Pivot Pin Bushing
- This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a WIDE FRONT axle pivot pin bushing for factory adjustable wide front axle and tie rods behind the axle: 1026, 1256, 400, 450, 660, 666, 300, 350, 460, 544, 560, 656, 706, 756, 806, 826, 856, H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, Super MDTA, Super MTA, W400, W450. Replaces 48841D (Item #: 109669, Ref: 48841D) $13.50

Farmall M Bolster Pivot Pin
Bolster Pivot Pin
- 1 1/4 inch diameter, 8 1/2 inches long. If you need a 1 1/2 inch Diameter Pin, order 379941R1. For tractor models H, Hydro 70, M, MD, MTA, Super H, Super M, 1206, 1256, 400, 450, 460, 544, 560, 656, 666, 686, 706, 756, 806, 826, 856. Replaces 358978R1, 358978R2 (Item #: 109487, Ref: 358978R2) $27.70

Farmall M Bracket, Belt Driven Power Steering Pump
Bracket, Belt Driven Power Steering Pump
- Bracket bolts to the left side of the engine above the governor. For tractor models M, MV, Super M, Super MV, MTA, 400, 450, W6, Super W6, W6TA, W400, W450. (Item #: 115153, Ref: 20969) $90.37

Farmall M Char-Lynn 217-1015 Power Steering Motor
Char-Lynn 217-1015 Power Steering Motor
- For International / Farmall tractor models M, Super M, Super MTA, 400, 450 (gas and LP Only), Replaces International OEM number 217-1015, S101-F, For Tractors with Char-Lynn power steering conversion kits, not for tractors with factory power steering, Use port block 111506, Use bracket 111414, Torque Output at 1000 PSI 700 in lbs, Rated Operating Pressure 1000 PSI, Operating Speed at 3 GPM 108 RPM, Recommended Fluid Input 2.5 to 3 GPM, Torque Generator, (Item #: 111933) $1479.01

No
Picture
Char-Lynn E58-121 Power Steering - Bracket
- For International / Farmall tractor models H, M, Super M, Super MTA, Replaces International OEM number E58-121, 121, Use with 111933 Torque Generator, (Item #: 111414) $69.00

Farmall M Front Axle Assembly, Wide, Heavy Duty
Front Axle Assembly, Wide, Heavy Duty
- For M, Super M, MTA, 400, 450. Includes 6 bolt hubs with 6 inch bolt circle and 4.62 inch pilot diameter hole, bearings and seals are also included. Heavy Duty Front Axle with hubs and mounting parts. Width on wide axles are adjustable from 60 inches to 86 inches. Additional $ 100.00 shipping due to the weight of this item, 320 pounds. (Item #: 119998, Ref: 23209) $3119.01

Farmall M Front Axle Clamp Pin
Front Axle Clamp Pin
- For International / Farmall tractor models H, HV, Hydro 70, Hydro 100, Hydro 186, M, MD, Super H, Super M, 300, 350, 400 (FARMALL), 450, 460, 544, 560, 656, 660, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, Compatible with International Construction and industrial models 21206, 21256, Replaces Case IH OEM number 350557R1, 0.739" Dia., 6.616" Long, 1.125" Head, For applications with steel center axle tube, but depending on the model it can be used on standard and high center front axle., With adjustable wide front axle, (Item #: 158235) $11.90

No
Picture
Front Saddle Assembly
- Fits Schwartz front end ONLY. For tractor models 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, H, M, MTA, Super H, Super M. (Item #: 172611, Ref: 7443) $332.00

No
Picture
Heavy Duty Front Axle Complete with Hubs
- REPLACES: HDUH4000 NOTE: HDUH models include 6 bolt hubs with 6 inch bolt circle and 4.62 inch pilot diameter hole, bearings and seals are also included. Fits on models: 400, 450, M, MTA, Super M. (Item #: 119998, Ref: 23209) $3119.01

Farmall M Oil Seal
Oil Seal
- Oil seal for bearing kit FW113FS. External Lip, Spring Loaded, Closed Case Seal, 2.786 in od, 1.75 in id, and .294 in wide. For Tractors H, Super H, M and MD, 4, Super W4, 300, 350. For 2606, 300, 350, 4, 460, 504, 606, H, M, MD, Super H, Super M, Super MD, Super W4. Check measurements. (Item #: 110745, Ref: 48539DA) $11.00

No
Picture
Pivot Pin 4-3/16
- For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 110958, Ref: 1394) $36.20

No
Picture
Pivot Pin, 6-11/16
- For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super M, Super H. (Item #: 110959, Ref: 1393) $4.98

Farmall M Pivot Pin Bushing Schwartz 60304
Pivot Pin Bushing Schwartz 60304
- For International / Farmall tractor models H, M, Super M, Super MTA, 300, 350, 400, 450, 504, 544, 560, 606, Replaces International OEM number 60304, Used on Wide Front conversion Kits., O.D.: 1.5", I.D.: 1.251", Length: 1.37", (Item #: 108886) $8.70

Farmall M Pivot Pin Jam Nut
Pivot Pin Jam Nut
- For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, (Item #: 108889) $11.90

Farmall M Power Steering Mounting Bracket - International
Power Steering Mounting Bracket - International
- For International / Farmall tractor models M, Super M, Super MTA, For Char-Lynn Torque Generator, (Item #: 115152) $82.80

Farmall M Power Steering, Pulley
Power Steering, Pulley
- Crankshaft Drive Pulley for Char-Lynn Power Steering. Used on gas and LP models: M, Super M, MTA, MV, Super MV, Super W6, W6, W6TA, 400, W400, 450, W450. Replaces Char-Lynn 5515 (Item #: 109569, Ref: 5515PL) $99.00

Farmall M Rear Saddle Assembly
Rear Saddle Assembly
- For International / Farmall tractor models M, Super M, Super MTA, 400, 450, Replaces International OEM number 3048, (Item #: 112554) $296.00

Farmall M Rear Support Bushing
Rear Support Bushing
- For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, 1850, Replaces OEM number 60305, (Item #: 110729) $6.70

Farmall M Replacement Plug
Replacement Plug
- For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, Replaces International OEM number 1389, (Item #: 108806) $7.10

Farmall M Spindle
Spindle
- For International / Farmall tractor models M, Super M, Super MTA, 400, 450, Compatible with John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces manufacturer number 9617, Vertical Length: 13-3/8", Shaft Diameter: 1-3/4", Spline Diameter: 1-5/8", Splines: 6, Seal Diameter: 2", Inner Bearing Diameter: 1.795", Outer Bearing Diameter: 1.374", (Item #: 110126) $248.71

Farmall M Spindle
Spindle
- For International / Farmall tractor models M, Super M, Super MTA, 400, 450, Replaces manufacturer number 3033, Vertical Length: 13-3/8", Shaft Diameter: 1-5/8", Spline Diameter: 1-5/8", Seal Diameter: 2", Outer Bearing Diameter: 1.375", Inner Bearing Diameter: 1.688", (Item #: 110267) $239.00

Farmall M Spindle Bearing
Spindle Bearing
- For tractor models (354, 364, B275, B414 with early serial numbers), (M early with OEM wide front axle). (Item #: 107056, Ref: 39862D) $27.50

Farmall M Spindle Bushing
Spindle Bushing
- For tractor models (B275, B414, 354, 364 all early serial number models), (M early Farmall with OEM wide front axle). (Item #: 107057, Ref: 40090D) $15.00

No
Picture
Spindle Bushing
- For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 3010, 3020, 4000, 4010, 4020, Replaces OEM number 7469, 1139-61539, A24K, B1A24K, For Heavy Duty Wide Front Ends, Length: 1.502", OD: 2.002", ID: 1.755", (Item #: 108895) $14.40

Farmall M Spindle - Left Hand, Used
Spindle - Left Hand, Used
- For International tractor models M (Late), Super M, 400, 450 (with OEM Wide Front Axle), Replaces International OEM number 360407R91, Left Side Spindle, Upright Shaft Length: 14.562", Upright Shaft Diameter: 1.667", Inner Bearing Diameter: 1.688", Outer Bearing Diameter: 1.375", For a new version of this item use Item #: 104341, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404341) $142.01

Farmall M Spindle, LH
Spindle, LH
- Fits Tractor Models: 400, 450 with OEM WIDE FRONT, M LATE, MTA, Super M. (Item #: 104341, Ref: 360407R91) $143.98

Farmall M Spindle, LH
Spindle, LH
- This spindle is for model M, Early Farmall with OEM wide front axle. Vertical shaft 10.625 lengh, 1.356 diameter. Uses Wheel Bearing Kit WBKIH4. (Item #: 100831, Ref: 51699DE) $293.00

Farmall M Spindle, RH
Spindle, RH
- This spindle measures A= 10.625 inches, B= 1.356 inches, C= 1.375 inches, D= .937 inch. For model M, early Farmall with OEM wide front axle. The wheel bearing kit used for this spindle is part number WBKIH4. (Item #: 100830, Ref: 51700DE) $346.00

Farmall M Spindle-RH
Spindle-RH
- Fits Tractor Models 400, 450 with OEM WIDE FRONT, M LATE, MTA, Super M. (Item #: 104342, Ref: 360408R91) $311.00

Farmall M Stay Ball Cap, Used
Stay Ball Cap, Used
- For International tractor models H, Hydro 70, Hydro 86, M, Super H, Super M, Super MTA, 544, 560, 656, 666, 706, 756, 806, 856, 1026, 1206, 1256, 1456, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 60763DB, For a new version of this item use Item #: 108884, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408884) $9.00

Farmall M Stay Rod Assembly
Stay Rod Assembly
- Stay Rod Assembly "Wishbone" fits wide front end tractors. For tractor models 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, H, Hydro 70, M, Super H, Super M, Super MD. Replaces 10546D, 360405R11 VERIFY PART NUMBER IN PARTS MANUAL FOR YOUR TRACTOR. (Item #: 167990, Ref: 360405R11) $513.00

Farmall M Stay Rod Assembly, Used
Stay Rod Assembly, Used
- For International tractor models H, HV, M, MD, Super H (s/n 19234-later), Super M (s/n 60001-later), 300, 350, 400, 450, 460, 544, 560, 656, 660, 706, 756, 806, 826, 856, 1026, 1206, 1256, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 360405R11, Wishbone, Adjustable Wide Front Axle, For a new version of this item use Item #: 167990, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429882) $325.01

Farmall M Steering Arm - Left Hand, Used
Steering Arm - Left Hand, Used
- For International tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 806, 856, Compatible with John Deere tractor models 60 (2 piece pedestal), 70 (2 piece pedestal), 620 (2 piece pedestal), 630 (2 piece pedestal), 720 (2 piece pedestal), 730 (2 piece pedestal), 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, Replaces OEM number 2130, Schwartz, For a new version of this item use Item #: 109364, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454518) $47.01

No
Picture
Steering Arm, LH
- Left hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 109364, Ref: 2130) $92.00

No
Picture
Steering Arm, RH
- Right Hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108808, Ref: 2129) $89.00

Farmall M Steering Arm - Right Side, Used
Steering Arm - Right Side, Used
- For International tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with International Header(s) 700, Compatible with International Harvester(s) 730, 830, Compatible with International Planter(s) 800, Compatible with International Tillage(s) 700, Compatible with International Hay Cutting(s) 730, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, Replaces OEM number 2129, Right Hand, Schwartz, For a new version of this item use Item #: 108808, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454517) $47.01

Farmall M Steering Bracket Assembly
Steering Bracket Assembly
- For International / Farmall tractor models H, M, MTA, Super H, Super M, 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, Replaces International OEM number 3049, (Item #: 110829) $106.00

Farmall M Steering Sector Worm Gear, Used
Steering Sector Worm Gear, Used
- For International tractor models M, Super M, Super MTA, 400, 450, Replaces International OEM number 50037DB, Teeth: 32, For a new version of this item use Item #: 124445, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435848) $110.01

Farmall M Steering Shaft Cross and Bearing (U-Joint)
Steering Shaft Cross and Bearing (U-Joint)
- Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.60

Farmall M Steering Universal Joint
Steering Universal Joint
- For tractor models H, Super H, M, Super M, 300, 350, 400, 450. Steering Universal Joint complete joint with yokes, pins and grease fitting. 7/8 inch ID. Not for Keyed yokes. (Item #: 127570, Ref: USJ78) $129.00

Farmall M Steering Wheel
Steering Wheel
- 16 inch diameter, 3/4 inch keyed hub, 3 covered spokes. For tractor models (F12, F14, F20, F30, A, B, H, M all early from 1937-1940). (Item #: 126718, Ref: 29118DC) $45.10

Farmall M Steering Wheel
Steering Wheel
- For M, MD, W9, WD9, WR9, 400, 450, 600, 650. Steering Wheel 20 inches in diameter, 3/4 inch keyed hub, 4 spokes. (Item #: 101430, Ref: 557282R91) $43.60

Farmall M Steering Wheel
Steering Wheel
- 17-5/8 inch diameter, 3/4 inch hub, for keyed shaft. 3 Spoke. Super A serial number 356000 and up, C, Super C, H, Super H, M, Super M, MD, W4, Super W4, W6, Super W6, W9, 100, 130, 200, 230, 240 and 300, 350, 400, 450 without Power Steering. Metal Spokes. Replaces IHS328. (Item #: 101429, Ref: 60070D-OE) $41.00

Farmall M Steering Wheel Nut
Steering Wheel Nut
- This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Item #: 157780, Ref: 353435X1) $1.00

Farmall M Steering Worm Bearing Retainer
Steering Worm Bearing Retainer
- This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 right hand threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504. (Item #: 173004, Ref: 6660DA) $39.60

Farmall M Steering Worm Gear, Sector
Steering Worm Gear, Sector
- 32 teeth. For tractor models 400, 450, M, Super M, Super MTA. The style of this gear is full circle. This gear has 32 teeth. It can also replace a 19 tooth sector (1/2 inch moon style). Replaces: 50037DA, 50037DB, 704168R1. (Item #: 124445, Ref: 50037DB) $160.00

Farmall M Steering Worm Shaft
Steering Worm Shaft
- This Steering Worm Shaft is 46-1/2 inches overall length with 3/4 inch NF thread. This shaft will NOT fit diesels UNLESS customer lengthens the shaft. Fits: (M, MV gas, LP), (MTA, MTAV, Super M, Super MTA, Super MV, Super MVTA gas, LP; up to serial number F52627 or L512541), (400 LP only; with 22 inch tank; serial number 21804 and up without factory power steering), (450 LP only; with 22 inch tank; up to serial number 13135 without factory power steering). Replaces shaft: 50052DB and 50052D. (Item #: 151915, Ref: 50052D) $198.22

Farmall M Steering Worm Shaft Bearing
Steering Worm Shaft Bearing
- This Steering Worm Shaft Bearing has a 0.984 inch inside diameter, a 2.047 inch outside diameter and a 0.590 inch width. Fits B, BM, BN, C, H, HV, M, MD, MDV, MTA, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV-TA, Super MTA, Super MV, Super MVTA, 200, 230, 400, 450, Super MTA, (424, 444 used as a steering worm shaft bearing; without power steering), 240, 300, 340, 350, 404, 504, 240, 404. Replaces: 1271857C91, 1273146C91, 210041, 43357D, 69696D, 741-0360, 741-3037, 941-3037, ST225, ST225AT, ST225B, ST225BT, ST225Y, ST678. (Item #: 178091, Ref: ST225B) $9.40

Farmall M Steering Worm Shaft Oil Seal
Steering Worm Shaft Oil Seal
- This Steering Worm Shaft Oil Seal measures 1.000 inch inside diameter, 1.503 inch outside diameter, 0.250 inch wide. Fits B, BN, C, H, HV, M, MD, MDV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDV-TA, Super MV, Super MVTA, 200, 230, 240, 400, 450, MTA diesel, 300, 340, 350. Replaces: 359042R91, 359257R91, 364468R91, 43800D, 43800DA, 488561R91. (Item #: 122678, Ref: 43800D) $5.50

Farmall M Thrust Bearing
Thrust Bearing
- For tractor models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $13.10

Farmall M Thrust Bearing, Axle
Thrust Bearing, Axle
- Standard duty. Fits Schwartz/Speeco type front ends. For tractor models 300, 350, (354, 364 last serial number models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last serial number models), H, M, MTA, Super H, Super M. Replaces OEM number 392671M91. Also replaces SCHWARTZ part number 60351. (Item #: 107048, Ref: T163) $21.70

Farmall M Tie Rod
Tie Rod
- Long notched With seal and stud nut for Swartz front end. 18 inches long from center of ball joint to end of shaft. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H. (Item #: 111711, Ref: 22513) $38.60

Farmall M Tie Rod Assembly
Tie Rod Assembly
- Using this tie rod assembly for the models listed will take modification, but it is the only one available for factory original row crop models: H, M, MD, MTA, Super H, Super M, Super MD, Sure MTA, 300, 350, 400, 450. This tie rod assembly tapered ball stud measures 0.675 inch to 0.762 inch at the widest point of the taper shaft, with 5/8-18 thread. The tie rod is adjustable to a maximum of 34-1/4 inches and a minimum of 20-7/8 inches. Fits factory INTERNATIONAL wide front axles only (with tierods behind the center axle.) Will NOT fit Swartz, Norden, Speeco, or other aftermarket wide front axles. To make this assembly work for these applications, the center tube must be shortened about an inch. We do not have instructions for doing this modification. This part can not be returned if you make modifications to the tube. Contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. (Item #: 100869, Ref: 223313) $86.00

Farmall M Tie Rod, DU Axle
Tie Rod, DU Axle
- Used on Schwartz front ends, this is a sealed (New Style) Tie Rod. It measures 18.750 inches from center of ball joint to end of rod. The rod has a 1 inch diameter. (Item #: 108804, Ref: 22813) $61.00

No
Picture
Tie Rod, Inner
- Inner tie rod with jam nut, seal and stud nut. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 103164, Ref: 22512) $35.40

Farmall M Tie Rod Tube
Tie Rod Tube
- Tube only. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108807, Ref: 1606) $28.98

Farmall M Tie Rod Tube Kit
Tie Rod Tube Kit
- For a Swartz front end. Kit includes, 1 tie rod tube, 1 plug, 1 ball stud, 2 1/8 inch cotter pins, 1 dust seal. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 112262, Ref: 22812) $71.00

Wheels
Farmall M 4.25 inch x 16 inch 3 Loop, Front Rim, Used
4.25" x 16" 3 Loop, Front Rim, Used
- For International tractor models H, M, Replaces Rims, Wheels, Tires OEM number 52635D, Width: 4.25", Diameter: 16", 3 Loop, 4.25X16, For a new version of this item use Item #: 110877, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410877) $112.01

Farmall M Bearing Cone
Bearing Cone
- Inner cone for bearing kit FW113FS. Tractors H, Super H, M and MD, 4, Super W4, 300, 350. For 300, 350, 4, H, M, MD, Super H, Super M, Super MD, Super W4 (Item #: 172828, Ref: ST2049) $14.90

Farmall M Bearing Cup
Bearing Cup
- Inner cup for bearing kit FW113FS. Tractors H, Super H, M and MD, 4, Super W4, 300, 350. For 300, 350, 4, H, M, MD, Super H, Super M, Super MD, Super W4 (Item #: 172841, Ref: ST974) $8.50

Farmall M Clamp Lock Nut
Clamp Lock Nut
- Wheel Clamp Lock Nut. 7/8-14 thread. Fits front wheel on tractors: H, Super H~ M, Super M~ B275, 300, 350, 400, 450, 460, 560. For 300, 350, 400, 450, 460, 560, B275, H, M, Super H, Super M (Item #: 109854, Ref: LN10-5) $18.90

Farmall M Front Rim
Front Rim
- Front Rim - Models H and M With Adjustable Tread Wheels - Blank front rim with 3 Loops (no center). 4-1-4 x 16. For tractor models H and M. (Item #: 110877, Ref: R4179) $198.00

Farmall M Front Rim, No Loops
Front Rim, No Loops
- Blank front rim (no center). 4-1/4 x 16, no loops. For tractor models: H, I4, I6, ID6, M, MD, O4, O6, W4, W6, WD6. Replaces: 354244R91, 354223R1. (Item #: 103754, Ref: R2056) $128.00

No
Picture
Front Wheel Hub-6 Bolt
- NOTE : This hub allows changing old style IH narrow front cast whl and hub to a standard 6 bolt. Hub uses standard wheel bearings and seals. Fits tractor models 400, M, and Super M. (Item #: 104501, Ref: 223311) $184.00

Farmall M Front Wheel Hub Dust Cap, Used
Front Wheel Hub Dust Cap, Used
- For International tractor models H, M, MD, 300, 350, 400, 450, 560, 660, Compatible with International Baler(s) 57, Replaces International OEM nos 365127R1, 48546DB, 48546DA, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430916) $17.01

Farmall M Front Wheel \ Rim Clamp
Front Wheel / Rim Clamp
- Used on many Farmall / IH tractors, this clamp 1.485 inch over all length with a 0.540 inch hole. Three or more used per wheel. Sold individually. Replaces 48976DA (Item #: 152052, Ref: 48976DA) $13.00

Farmall M Rear Rim - Models H, M, Super H, Super M
Rear Rim - Models H, M, Super H, Super M
- Deep drop center, 10" x 38". For tractor models H, M, Super H, Super M, early 300 and 400. DOES NOT INCLUDE HUB. Must be shipped by truck freight. (Item #: 178554, Ref: R2058) $611.00

No
Picture
Rear Rim - Models H, M, Super H, Super M
- Deep drop center, 14" x 38". For tractor models H, M, Super H, Super M, early 300 and 400. DOES NOT INCLUDE HUB. Must be shipped by truck freight. (Item #: 178555, Ref: R2060) $737.00

Farmall M Rear Wheel Clamp
Rear Wheel Clamp
- This Rear Wheel Clamp is used on Farmall: H, M, MD, Super M, 400, 450. Many of these tractors used more than one style clamp. This is a 4 bolt clamp for 2 3/4 inch axles. Verify size before ordering. Replaces 6326DC. Price is for one piece. Image shows both sides. (Item #: 190564) $149.00

Farmall M Rear Wheel Rim Clamp Bolt
Rear Wheel Rim Clamp Bolt
- For International / Farmall tractor models H, HV, M, MD, MTA, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super W9, W4, W6, W9, WD9, 300, 400 (s/n 5180-earlier), Replaces International OEM number 48985DA, 13491R1, 4.25" x 5/8" NC, Square head 1", Grade 5, Single Dot Square Head, (Item #: 126624) $14.40

Farmall M Rim Clamp, Used
Rim Clamp, Used
- For International tractor models H, HV, M, MD, Super H, Super HV, Super M, Super MTA, 300, 350, 400, 450, 560, 660, Replaces International OEM nos 48984D, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496585) $5.01

Farmall M Wheel Bearing Kit, Wide Axle Assembly
Wheel Bearing Kit, Wide Axle Assembly
- For tractor models H, HV, M, MD, MF, SMD, Super H, Super HV, SW, W4, 300, 350, 330. This is a complete front axle kit for one wheel used on wide axle assembly (only). Contains: 14138A (Cone), 14274 (Cup), 1779 (Cone), 43828D (Gasket), 704083R1 (Seal), 48548D (Seal Retainer), 1729 (Cup). Inner bearing inside diameter is 1.37 inch, outside diameter 2.71 inch. Outer bearing inside diameter is 0.93 inch, outside diameter 2.23 inch, seal inside diameter is 1.74 inch, outside diameter 2.83 inch. (Item #: 100853, Ref: WBKIH4) $40.00



Accessories / Supplies
Farmall M Auxiliary Heater, Universal
Auxiliary Heater, Universal
- This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Farmall M Magnetic Block Heater
Magnetic Block Heater
- Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems
Farmall M Decal, Fear This IH
Decal, Fear This IH
- Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.87

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $17.10

Farmall M Decal, IH Block
Decal, IH Block
- "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.60

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.90

Farmall M Decal, IH Block
Decal, IH Block
- "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.50

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $30.10

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $36.10

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.60

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.90

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $14.00

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.40

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.40

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.30

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.60

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $14.00

Farmall M Decal, IH Block
Decal, IH Block
- "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $25.10

Farmall M International Decal
International Decal
- 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.30

Farmall M International Decal
International Decal
- 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.30

Farmall M International Decal
International Decal
- 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.40

Farmall M International Decal
International Decal
- 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.60

Farmall M International Decal
International Decal
- 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $14.90

Farmall M International Decal
International Decal
- 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $11.20

Farmall M International Decal
International Decal
- 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $18.60

Electrical System

NOTE
Alternator
- Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.
NOTE

No
Picture
Alternator, 12 Volt
- Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Farmall M Alternator Conversion Plug
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Farmall M Alternator Top Adjusting Bracket, Universal
Alternator Top Adjusting Bracket, Universal
- Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Farmall M Distributor Cap, WICO
Distributor Cap, WICO
- For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

Farmall M Magneto, Wico XH and XHD, Service and Parts Manual
Magneto, Wico XH and XHD, Service and Parts Manual
- Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Farmall M Spark Plug
Spark Plug
- Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20


NOTE
Starter
- Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE

Farmall M Starter, Generator, Distributor Tag, 6 Volt, Blank
Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

Farmall M Starter Solenoid
Starter Solenoid
- This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.70

Farmall M Tag for Starter\Generator, 12 Volt, Blank
Tag for Starter/Generator, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Farmall M Voltage Regulator, 12 Volt
Voltage Regulator, 12 Volt
- 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $27.00

Engine Gaskets
Farmall M Silicone Blue RTV
Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE
Valve Overhaul Kits
- Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE

Engine Rings

NOTE
Piston Ring Sets
- Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE

Exhaust System
Farmall M Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Farmall M Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Farmall M Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Farmall M Chrome Exhaust Stack
Chrome Exhaust Stack
- Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Farmall M Chrome Exhaust Stack
Chrome Exhaust Stack
- Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Farmall M Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Farmall M Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Farmall M Chrome Exhaust Stack
Chrome Exhaust Stack
- Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

Farmall M Muffler Clamp, 1-1\4
Muffler Clamp, 1-1/4
- New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.78

Farmall M Muffler Clamp, 1-3\4
Muffler Clamp, 1-3/4
- New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

Farmall M Muffler Clamp, 1-3\8
Muffler Clamp, 1-3/8
- New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

Farmall M Muffler Clamp, 2-1\4
Muffler Clamp, 2-1/4
- New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

Farmall M Muffler Clamp, 2-3\4
Muffler Clamp, 2-3/4
- New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Farmall M Muffler Clamp, 3
Muffler Clamp, 3
- New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

Farmall M Muffler Clamp, 3-1\2
Muffler Clamp, 3-1/2
- New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Farmall M Muffler Clamp, 4
Muffler Clamp, 4
- New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Farmall M Muffler Clamp, 5
Muffler Clamp, 5
- New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Farmall M Rain Cap
Rain Cap
- This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Farmall M Rain Cap
Rain Cap
- This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Farmall M Rain Cap
Rain Cap
- This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Farmall M Rain Cap
Rain Cap
- This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Farmall M Rain Cap
Rain Cap
- This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Farmall M Rain Cap
Rain Cap
- This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Farmall M Rain Cap
Rain Cap
- This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Farmall M Stainless Steel Clamp, 2.75 Inch
Stainless Steel Clamp, 2.75 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Farmall M Stainless Steel Clamp, 4 Inch
Stainless Steel Clamp, 4 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake
Farmall M Air Cleaner Filler
Air Cleaner Filler
- Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Farmall M Fuel Tank Screen
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

Farmall M Main Fuel Valve
Main Fuel Valve
- This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40

Farmall M Sediment Bowl Gasket, 2-1\8 inch
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges
No
Picture
Amp Gauge
- This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00

No
Picture
Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Farmall M Hourmeter, Analog
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Farmall M Oil Gauge
Oil Gauge
- For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20

Farmall M Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar
Farmall M Conversion Tong
Conversion Tong
- Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $367.00

Farmall M Conversion Tong
Conversion Tong
- Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87

Farmall M Conversion Tong
Conversion Tong
- Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $440.00

Farmall M Conversion Tong
Conversion Tong
- Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $440.00

Farmall M Hair Pin Assortment
Hair Pin Assortment
- 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Farmall M Universal Drawbar Lock
Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System
Farmall M Filter Element
Filter Element
- 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Farmall M Filter Element
Filter Element
- 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Farmall M Hydraulic Hose Assembly-NPT, 12 inch
Hydraulic Hose Assembly-NPT, 12 inch
- Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Farmall M Hydraulic Hose Assembly-NPT, 180 inch
Hydraulic Hose Assembly-NPT, 180 inch
- Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Farmall M Hydraulic Hose Assembly-NPT, 24 inch
Hydraulic Hose Assembly-NPT, 24 inch
- Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Farmall M Hydraulic Hose Assembly-NPT, 30 inch
Hydraulic Hose Assembly-NPT, 30 inch
- Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Farmall M Hydraulic Hose Assembly-NPT, 48 inch
Hydraulic Hose Assembly-NPT, 48 inch
- Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Farmall M Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Farmall M Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements
Farmall M Axle Bolt
Axle Bolt
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Farmall M Axle Bolt
Axle Bolt
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Farmall M Bearing cone (L44643)
Bearing cone (L44643)
- For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Farmall M Caster Assembly
Caster Assembly
- Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Farmall M Caster Assembly, Old Style
Caster Assembly, Old Style
- Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Farmall M Hub Assembly
Hub Assembly
- Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Farmall M Hub with Bearing Cups
Hub with Bearing Cups
- 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches
- Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 31.5 Inches
- Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches
- Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches
- Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches
- Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches
- Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Farmall M Seal, Caster
Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Farmall M Tail Wheel Assembly
Tail Wheel Assembly
- 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant
- Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights
Farmall M Headlight Assembly, Teardrop- 12 Volt
Headlight Assembly, Teardrop- 12 Volt
- Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $45.00

Farmall M Headlight Assembly, Teardrop - 6 Volt
Headlight Assembly, Teardrop - 6 Volt
- Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $42.00

Farmall M Light Bulb, Sealed Beam, 6 Volt
Light Bulb, Sealed Beam, 6 Volt
- 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.70

No
Picture
Sealed Beam Light
- 6 Volt (Item #: 111938, Ref: R2712) $42.00

No
Picture
Sealed Beam Light
- 12 Volt (Item #: 122080, Ref: R2713) $36.00

Farmall M Switch, Light, with Knob
Switch, Light, with Knob
- Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous
Farmall M Cab Foam Kit
Cab Foam Kit
- With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $390.00

Farmall M Deluxe Canopy, 3 Bow
Deluxe Canopy, 3 Bow
- This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Farmall M Tractor Umbrella with Frame & Mounting Bracket - Red
Tractor Umbrella with Frame & Mounting Bracket - Red
- Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint
Farmall M 44 Minute DVD - How to Paint a Tractor
44 Minute DVD - How to Paint a Tractor
- This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can
- 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon
- High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Farmall Red, 1 Gallon
- This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $54.00

No
Picture
Paint, Farmall Red, 1 Quart
- This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.30

No
Picture
Paint, Gloss Black, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.60

No
Picture
Paint, Gloss Black, Spray Can
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, IH Blue, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $58.00

No
Picture
Paint, IH Blue, 1 Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $23.40

No
Picture
Paint, IH Blue, Spray Can
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $9.40

No
Picture
Paint, IH Red, 1 Gallon
- This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00

No
Picture
Paint, IH Red, 1 Quart
- This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $23.40

No
Picture
Paint, IH Red, Spray Can
- This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.50

No
Picture
Paint, McCormick Deering Gray, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $86.00

No
Picture
Paint, McCormick Deering Gray, 1 Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.10

No
Picture
Paint, McCormick Deering Gray, Spray Can
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $12.50

No
Picture
Paint, Off White, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $60.00

No
Picture
Paint, Off White, 1 Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $23.70

No
Picture
Paint, Off White, Spray Can
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $7.80

No
Picture
Paint, Red Primer, 1 Gallon
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.40

No
Picture
Paint, Satin Black, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Universal Non Glare Black, 1 Quart
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $16.90

No
Picture
Paint, Universal, Non Glare Black, Spray Can
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon
- From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating
- Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit
- Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Farmall M Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline
Farmall M Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Farmall M Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00


NOTE
PTO Adapter
- PTO adapters are located under the PTO category in the Accessories and Universal Parts section.
NOTE

Farmall M PTO Safety Clutch, 40 HP
PTO Safety Clutch, 40 HP
- 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats
Farmall M Seat, Air Suspension, Black Leatherette, Universal
Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Farmall M Seat, Air Suspension, Black Leatherette, Universal
Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Farmall M Seat, Air Suspension, Cloth, Universal
Seat, Air Suspension, Cloth, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Farmall M Tie-On Seat Cover
Tie-On Seat Cover
- Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599) $43.80

Farmall M Tie-On Seat Cover
Tie-On Seat Cover
- Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $39.00

Farmall M Universal Seat
Universal Seat
- Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts
Farmall M Cab Foam Kit Spray Adhesive
Cab Foam Kit Spray Adhesive
- 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Farmall M Pilot Punch Set
Pilot Punch Set
- Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering
Farmall M Eaton Power Steering Pump Replacement
Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Farmall M Filter, Power Steering
Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Farmall M Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tools
No
Picture
Blade Fuse Assortment
- With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester
- Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Farmall M Front Rim
Front Rim
- This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166) $92.00

Farmall M Front Rim
Front Rim
- This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Farmall M Tire Inner Tube
Tire Inner Tube
- This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Farmall M Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

Farmall M Tire, Three Rib
Tire, Three Rib
- Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Farmall M Tire, Three Rib
Tire, Three Rib
- Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Farmall M Tire Tube
Tire Tube
- For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch
- This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch
- This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch
- This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch
- This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00

CategoriesAll M Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
Farmall M Manuals
Engine 4-Cyl Gas Early , C60, C146, C153, C175, C281, Series Engines ONLY, Used in, H, M, W-9, A, B, C, SUPER C, 300, 350, Etc., Gas TRACTORS Service Manual 163 Pages (Part No: IH_EGasENG_SV) $51.12

M ( This Manual Covers ONLY the CLUTCH ) - Service Manual 132 Pages (Part No: IH_CLUTCH_SV) $49.99

M G&D (Only has very brief section on the Clutch, if you need more then get IH_CLUTCH_SV) Service Manual 128 Pages (Part No: IH_M_SV) $46.63

M G&D I&T Aftermarket Shop Manual 88 Pages (Part No: IH-8) $29.95

M G&D - Works for all years and all Serial #'s - Parts Manual 475 Pages (Part No: IH_M,MD_PT) $82.51

M G&D - ( This is the best manual for the Electrical Information ) - Operators Manual 105 Pages (Part No: IH_M,MV_OP) $38.99

M Implements Parts Manual 422 Pages (Part No: IH-P-A,B,H,MIM) $102.95

M Hyd Lift-All Service Manual 35 Pages (Part No: IH_HYDRLIFT_SV) $25.34

M Hyd Lift-All Operators Manual 16 Pages (Part No: IH-O-HYDR LIFT) $14.61

M Power Bale Press Parts Manual 790 Pages (Part No: IH-P-BALEPRESS) $138.95

M Power Loader & Blade Operators Manual 54 Pages (Part No: IH-O-H LDR,BLD) $20.95

M Special Attachements (40 Items) - This manual is for actual Attachments or Modifications on the Tractor Itself, NOT any Pull Behind or Belly Equipment. Examples - Swinging Drawbar, Air Pipe, Exhaust Muffler, Magneto grounding Switch, etc. Operators Manual 56 Pages (Part No: IH-O-H,M ATTCH) $20.95

M Starting-Lighting Operators Manual 60 Pages (Part No: IH-O-ST&LITES) $25.34

M Grain Drill (Low Rubber or High Steel) Horse or Tractor Drawn Operators and Parts Manual are Combined 140 Pages (Part No: IH-OP-M DRILL) $29.95

M, Accessories Only - Includes Piston Kits, Brgs, Lites, Etc. Parts Manual 185 Pages (Part No: IH_ACCESSORY_PT) $43.50

Super M Service Manual 218 Pages (Part No: IH-S-SUPMTA,W6) $42.95

Super M I&T Aftermarket Shop Manual 88 Pages (Part No: IH-8) $29.95

M - Covers the Tran & Final Drive ONLY - Service Manual 37 Pages (Part No: IH_H,MTRANFD_SV) $26.95

Engine 4-Cyl Gas Early , C1, C2A, C123, C4, C164, C169, C6, C264, C9, Series Engines ONLY, Does NOT Specificaly Cover those Engines, But Apply Generally , Worked in, H, M, W-9, A, B, C, SUPER C, 300, 350, Etc., Gas TRACTORS Service Manual 163. Pages (Part No: IH_EGasENG_SV) $51.12

Miscellaneous Related Items
Tune-Up
Farmall M Farmall MTA - Tune-Up
Farmall MTA
- Includes rebuilding the carburetor and distributor, oil and filter change, brake adjustment, troubleshooting and more. Step-by-step instructions. Information also pertains to the Farmall H, Super H, M, Super M, 300 & 400 Series, McCormick W and O Series and International I Series Tractors. JDV-00850 (Item #: 184815) $25.09

Rebuild
Farmall M Farmall MTA - Rebuild
Farmall MTA
- Shows how to completely rebuild the tractor's engine. You'll see the engine disassembled down to the bare block and then rebuilt step-by-step in an easy-to-follow format. With information pertaining to the Farmall H, Super H, M, Super M, Super MTA, 300 & 400 Series, McCormick W and O Series and International I Series Tractors. JDV-00750 (Item #: 190520) $25.09

Hat
Farmall M IH Red Hat with Black Brim
IH Red Hat with Black Brim
- With black brim and IH logo. (Item #: 183945) $14.99

Farmall M IH Solid Red Hat
IH Solid Red Hat
- With IH logo. (Item #: 184041) $14.99

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Categories]   [All Farmall Models]   [Print]  







PayPal


Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2024 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy