FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 460 Tractor Parts

[Categories] [All Farmall Models] [Print]

Accessories / Supplies

Engine Block Heater - Frost plug heater with cord. 600 watt, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Replaces 407046R92. Cord is 12 inches long. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D. For 2504, 2806, 315, 340, 403, 453, 460, 503, 504, 560, 606, 615, 656, 660, 706, 715, 806. (Item #: 120027, Ref: 106725A1) $41.60

Belts

No
Picture
Belt - Fan - For International / Farmall tractor models 460, 560, 606 (s/n 12799-13949), 656, 660, 706 (s/n 49664-earlier), 706 (s/n 49664-later), Replaces OEM number 385738R1, Replaces Case IH OEM number 316250R1, Color: Black, Length: 49.3, Material: Polyester Cord, Thickness: 0.373, Width: 1/2, Type: REC (Raw Edge Cogged), (Item #: 123126) $8.70

Brakes

Bonded Lined Brake Disc - 6 inch, 10 spline. For tractor models 340 Diesel, 460, 504, 606, 2504, 2606. Replaces: 1975460C2, 368292R92, 1975462C3, 404918R91. (Item #: 105448, Ref: 1975460C3) $17.40

Brake Actuating Spring - Used with disc brakes. For tractor models H, HV, Super C, Super H, O4, OS4, W4, 200, 230, 240, Farmall 300, 330, 340, Farmall 350, 404, 460, 504, 544, 606, 2404, 2504, 2544, 2606, 203, 205, 315, 615. Replaces: 354627R1 (Item #: 116863, Ref: A30910) $7.70

Brake Actuator Assembly - For International / Farmall tractor models 330, 340, 460, 504, 2504, 2606, Compatible with International Combine (s) 315, 615, Replaces International OEM number 368293R91, (Item #: 105438) $247.00

No
Picture
Brake Disc - Bonded lined brake discs. Fits tractors 560, 660 Combines, 151 Hillside diesel, 403 Hillside, 453 Hillside, 915, 460 to serial number 32000, 1480 to serial number 34000. 7-1/8 inch x 4 inches, 12 spline. For tractor models: 1460, 1480, 151, 403, 453, 460, 560, 660, 915. Replaces 369079R92, 369079R92, 1975446C2, 121963C91, 11963C91. (Item #: 105445, Ref: 1975446C3) $18.80

Brake Kit - For International / Farmall tractor models 330, 340, 460, 504, 606, 2504, 2606, Replaces International OEM number 368292, 830617, A30910, Kit Includes 2 Brake Discs, 4 Steel Balls, 2 Brake Springs, (Item #: 162741) $58.00

No
Picture
Brake Operating Rod and Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 330, 340 (Farmall and International), 460 (Farmall and International), 504 (Farmall and International), 544 (Farmall and International), 606 (gas), 656 (Farmall and International), 664, 666 (gear drive), 686 (gear drive), 2504, 2544 (diesel), 2606 (diesel), 2656 (diesel), Replaces International OEM number 403840R2, 368297R1, 403840R1, 368297R11, 388271R1, (Item #: 111363) $114.00

Brake Operating Rod Ball - ** NIS - No Due ** For tractor models 240, 2404, 2504, 2544, 2606, 2656, 330, 340, 404, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 100, Hydro 86. (Item #: 150735, Ref: 368298R1) $13.50

Brake Pedal Return Spring - For tractor models: 300, Super M, Super MD, Super MTA, Super W6, Super W6TA, OS6, ODS6, Super H, Super HV, 350, 400, 450, W400, W450, 460, 560, 660. Replaces IHS873. (Item #: 165220, Ref: 357164R1) $11.40

Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Item #: 153586, Ref: AB2578R) $15.50

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00

Disc Brake Boot - For tractor models 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 70, Hydro 86, 2544, 2606, 2656. (Item #: 112346, Ref: 368299R1) $9.50

Clutch

No
Picture
Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-11/16 inch 16 spline, .787 inch pilot. For tractor models 460, 664, 666, 686, 3616. (Item #: 122257, Ref: S.70927) $26.30

$Farmall 460 Clutch Alignment Tool - 1-3\32 inchx10 and 1-11\16 inchx16 Spline$
Clutch Alignment Tool - 1-3/32"x10 and 1-11/16"x16 Spline - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686, 2500, 2504, 2544, 2606, 2656, 3514, 3616, 8000, Pilot Diameter: .787, Large Spline: 1-11/16" 16 Spline, Small Spline: 1-3/32" 10 Spline, (Item #: 122048) $26.30

Clutch Bearing - Release bearing for tractor models 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Please verify measurements before ordering. Replaces 18567D, 362028R91, 362028R92, 55211D, 55212D (Item #: 107007, Ref: N1087) $21.00

Clutch Bearing Seal Kit - For International / Farmall tractor models 300, 350, 460, 544, 606, 656, 664, 666, 686, 2544, 2606, 2656, Contents: 1-832375 Release Bearing, 1-836304 Pilot Bearing, 1-363514 IPTO Seals, 1-2385243 IPTO Bearing Cage O-Ring and 252556 IPTO Bearing Cage O-Ring, (Item #: 108786) $81.00

Clutch Disc - 10-1/2 inch diameter, 1-1/8 inch hub, 10 spline. For tractor models 300, 330, 340, 350, 460, 504, 655, 606, 2500, 2504, 2544, 2606, 3616, 8000. (Item #: 166104, Ref: 384633R91) $189.00

Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Item #: 113817, Ref: 375701R91) $128.00

Clutch Disc - Inner, Used - For International tractor models 330 (1/57-12/58), 340 (& Farmall, Gas and Diesel, 1/58-12/63), 460 (& Farmall, Gas and Diesel, 1/58-12/60), 504 (& Farmall, Gas and Diesel, 1/60-12/68), 560 (& Farmall, Gas and Diesel, 1/58-12/63), 606 (Gas, 1/61-12/67), 660 (Gas and Diesel, 1/59-12/63), 2504, 2606 (Diesel, 1/61-12/67), Replaces Case IH OEM number 374033R1, For a new version of this item use Item #: 168580, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 457216) $4.76

Clutch Disc, Organic - New, 10.5 inch, spring loaded, 1.125 inch spline diameter, 10 splines. For tractor models 2500, 2504, 2544, 2606, Farmall 300, 330, 340, Farmall 350, (3616 diesel serial number up to 2117 or gas up to serial number 1945), 460, 504, 544, 606. (Item #: 156475, Ref: 360488R92) $96.00

Clutch Disc, Remanufactured, 360488R92 - For International / Farmall tractor models 300, 340, 350, 460, 504, 606, Compatible with International Construction and industrial models 3616, Replaces International OEM number 360488R92, 360488-RO, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, For a New version of this sku use Item #: 156475, (Item #: 204410) $100.00

Clutch Disc, Remanufactured, 375701R91 - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, 375701HD4, Clutch Size: 7", Clutch Hub: 1-1/2", Clutch Spline: 14, Clutch Center: Solid, Clutch Type: TA 4 Pads, (Item #: 205230) $135.00

Clutch Disc, Remanufactured, 384633R91 - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2404, 2544, 2606, 3616, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 384633R91, 384633R91R, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 205053) $175.50

Clutch Disc, Remanufactured, 384633R91 - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2504, 2544, 2606, 3616, Replaces International OEM number 384633R91, 384633R91R, H384633, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 205990) $95.00

Clutch Kit - For International / Farmall tractor models 300, 330, 340, 350, 460, 554, 606, 2504, 2544, 3616, Replaces International OEM number 360488R92, 360746R1, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Hub Diameter: 1-11/16", Pressure Plate Splines: 16, (Item #: 156480) $300.00

$Farmall 460 Clutch Kit, 10-1\2 Inch$
Clutch Kit, 10-1/2 Inch - This remanufactured single stage clutch kit includes a 10 1/2 inch, 9 spring, 16 spline, 1 11/16 inch hub remanufactured pressure plate assembly, a 10 1/8 inch, 10 spline, 1 1/8 inch hub, 4 pad remanufactured clutch disc; new release bearing and two new pilot bearings. For tractors: 300, 320, 330, 340, 350, 460, 504, 544, 606. Industrial: 2500, 2504, 2544, 2606, 3616 (gas to serial number 1945 and diesels to serial number 2117). (Item #: 202008, Ref: 360746NC) $329.60

Clutch Kit, 7 Inch - This remanufactured torque amplifier clutch kit contains a 7 inch, 6 spring pressure plate assembly (360215R94), a new 7 inch 14 spline 1 1/2 inch hub, solid, metallic clutch disc (375701R91), and new release bearing (362028R92). Add $50.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. For tractors: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2656. (Item #: 202007, Ref: 360215NC) $226.60

Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $53.00

Clutch Release Bearing Carrier, Used - For International tractor models 300, 330, 340, 350, 460, 474, 504, 544, 574, 606, 656, 664, 666, 674, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 360501R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431168) $20.01

Pressure Plate Assembly, Remanufactured, 360215-R - For International / Farmall tractor models Super MTA, Super W6, W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 360215-R, 360215R94, 360215R94R, 360215-RN, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 130088, (Item #: 204408) $87.50

Pressure Plate Assembly, Remanufactured, 360746-R - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2504, 2544, 2606, Compatible with International Construction and industrial models 3616, Replaces International OEM number 360746-R, 376360R1, 376360R94, 376360R94R, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-11/16", Pressure Plate Spline: 16, Pressure Plate Type: Single Stage, (Item #: 204409) $112.00

Pressure Plate, Remanufactured - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206065) $115.01

Pressure Plate, Remanufactured - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2500, 2504, 2544, 2606, 3514, 3616, 8000, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-11/16", Pressure Plate Spline: 16, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206066) $122.01

Release Bearing - Clutch release bearings, 3.500 inch outside diameter, 2.375 inch inside diameter, .730 inch wide bore. For tractor models 300, 330, 340, 350, 424, 444, 460 with standard clutch, 504, 606, 2424, 2444, 2504. For 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 107995, Ref: 59879D) $30.90

Remanufactured Clutch Kit - Our remanufactured clutch kit contains: 12 inch, 17 spline, 1 3/4 inch hub, 12 spring, remanufactured pressure plate assembly; a 12 inch 11 spline 1 3/16 inch hub, remanufactured clutch disc with woven lining; new release and pilot bearings. There is also a $50.00 refundable core charge that will be added to your order. For tractors: Super MTA, 400, 450, 460. For 200, 230, HV, MTA, Super H, Super M. (Item #: 202006, Ref: 359121K) $309.00

T.A. Disc - Woven - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, Size: 7", Hub: 1-1/2", Spline: 14, Center Solid, Type: Woven, For Metallic Version use Item #: 113817, (Item #: 110867) $47.60

Cooling System

Fan, 6 Blade - 18.50 inch diameter, 1.250 inch pilot hole, 1.938 inch center to center on bolt holes. For tractor models (3514 gas with syncromesh transmission), (460, 560 diesel). (Item #: 163833, Ref: A173716) $102.00

Fan and Generator Belt - Fits engines C221, C263, C301 on tractors: 2606, 2806, 460, 560, 606, 650, 660, 806. This is also an alternator belt for D282 diesel engine in: 560, 660. Generator and water pump belt in: 706, 2706. Belt is 1/2 inches wide and 46 inches in length. (Item #: 172612, Ref: 403348R1) $15.40

Fan Belt - Generator belt measures 49.77 inches Length and 0.50 inch Width, fits engines: D236, and D282. For tractor models: 460, 560, 660. Also, for engine D282 Alternator for tractor models 656, 706, 2706. For 2706, 460, 560, 656, 660, 706. Please verify measurements before ordering (Item #: 123129, Ref: 385674R1) $10.40

Heater, Engine Block - This is a Frost Plug Heater with cord. It is 600 watts, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Power Cord is about one foot long. Replaces 407046R92. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D301. Tractors: 340, 460, 504, 560, 606, 656, 660, 706, 806, 2504, 2806. Combines: 315, 403, 503 Hillside, 503, 615, 715. (Item #: 120027, Ref: 106725A1) $41.60

Radiator - For tractor models 460 with GAS engine. Has 3 rows of tubes (7 fins per in.)This radiator uses Cap #R1855 (Item #: 184933, Ref: 370413R92) $522.00

Radiator - Radiator assembly, less cap. For tractors: 460 Farmall diesel or gas, 560 gas. Farmall Only - Will NOT work on International Utility. Replaces OEM numbers 370413R92, 370415R92, 370414R92. (Item #: 101715, Ref: 370414R94) $490.00

Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91) $6.60

Radiator Cap - 4 pound Pressure Cap. For tractor models 100, 140, 200, 230, 300, 330, 350, 400, 450, B450, 460, 560, 600, 650, 660. Replaces: 361705R91, 370871R91, 362323R91. Not for short filler neck. (Item #: 108081, Ref: D25826) $10.00

Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 and WD6, **Super W9 and WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Item #: 112331, Ref: 180224M91) $6.60

Radiator Cap Pressurized - For International / Farmall tractor models 100, 130, 140 (s/n 13967-earlier), 200, 230, 240, 330, 340, 460, 560, 600, 650, 660, Replaces International OEM number 393229R91, 362323R91, 370871R91, 2.050 radiator neck I.D.. Measure radiator neck before ordering, 7 PSI, (Item #: 112332) $6.98

Radiator Hose, Lower - Radiator hose, lower, for International gas tractors. For tractor models International 460 International Utility (Not Farmall), 606. 2 inch inside diameter on both ends. Replaces 369347R2, 639347R1, 369347R1 (Item #: 115643, Ref: 369347R2) $13.20

Radiator Hose, Lower - Radiator hose, lower. For tractors to serial numbere 5274, and Farmall to serial number 37237. For tractor models Farmall 460, 560, 656, 660, 706. (Item #: 115648, Ref: 369922R1) $14.20

Radiator Hose, Lower - Radiator hose, lower for diesel tractors. International tractor to serial number 5274, and Farmall tractors to serial number 37237. For 460, 560, 656, 660, 706. (Item #: 115646, Ref: 371307R1) $12.00

Radiator Hose Upper - Radiator hose, upper. For 460, 560 (Item #: 116822, Ref: 369921R1) $13.70

Radiator Hose, Upper - For tractor models 460, 606. (Item #: 115640, Ref: 369346R2) $11.00

Radiator Mounting Pad - For International / Farmall tractor models 460, 560, 660, Compatible with International Harvester (s) 414, 420, Replaces International OEM number 369932R1, Sold individually, (Item #: 126211) $15.40

Thermostat - Thermostat. For tractor models Gas 460, 560, 656, 660, 806, 706, 2606, 2706, 2806. Does not come with gasket. We do not have a gasket available. (Item #: 109692, Ref: 108120R92) $11.10

Thermostat - This Thermostat opens at 180 degrees F. It is used on the following Diesel tractors: 2606, 2706, 300, 350, 3616, 400, 450, 460, 560, 606, 656, 660, 706, TD6. Replaces 262882R1, 313942R91 (Item #: 110455, Ref: 70229927) $20.30

Water Pump - With Hub For 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2565, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 70, Hydro 86 Tractors, 151, 151 Hillside, 181, 205, 303, 315, 403, 453 Hillside, 615, 715 Combines with C221, C263, C291, or C301 Gas Engines or D166, D188, D236, or D282 Diesel Engine. Replaces: 303395R91, 303396R91, 308383R91, 318118R21, 318119R91, 318119R92, 323877R11, 368496R91, 395813R91, 601816C92, 701128C94 (Item #: 107892, Ref: 601816C92) $88.00

Water Pump By-Pass Hose - For International / Farmall tractor models 340 (Diesel), 460 (Gas), 504 (Diesel), 560, 606, 660, 706, 806 (all Gas), 2504 (Diesel), Replaces International OEM number 437575C3, 169192R1, 224563R1, 381547R1, 437575C2, 43757C1, ID: .590", OD: .926", Length 6.41", (Item #: 128128) $9.00

No
Picture
Water Pump Gasket - Plate to Block - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, T340, TD6, TD9, 3514, 3600, 3616, 3800, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 69676R1, For Reman Water Pump use Item #: 107892, (Item #: 156625) $5.30

Water Pump Hub - Used with water pumps 601816C92, 375742R92, 375793R92. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 330, 340, 404, 460, 504, 560, 606, 660, 706, 806. (Item #: 121936, Ref: 368501R2) $36.20

Water Pump Pulley - Used with 601816C92 water pump. For tractor models Hydro 70, Hydro 86, 2606, 2656, 2706, 2756, 403, 460, 560, 606, 656, 660, 666, 706, 756, 766, 806, 826, 856. (Item #: 167558, Ref: 395815R2) $58.00

Water Pump, Remanufactured, 601816C92 - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models 3514, 3616, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 601816C92, 749170C91, Replaces Casting number 169204R1, 303394R2, 318118R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, For a New version of this sku use Item #: 156625, (Item #: 204199) $100.01

Decals and Emblems

No
Picture
Decal Set - Chassis only set for 460 Diesel. (Item #: 100959, Ref: R3608) $47.40

No
Picture
Decal Set, Vinyl Cut - Chassis only set for 460 Gas. (Item #: 100958, Ref: R3607) $44.00

Emblem - Number emblem for Farmall 460 DIESEL. (Item #: 103932, Ref: 369121R1) $36.00

Hood Ornament, Chrome - For tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544. (Item #: 108483, Ref: 369180R1) $76.00

Hood Ornament, Used - For International tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2826, Replaces International OEM number 369180R1, Chrome finish, For a new version of this item use Item #: 108483, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435392) $43.20

$Farmall 460 IH Decal, 1-5\8 inch, Vinyl$
IH Decal, 1-5/8", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1 5/8", no background, (Item #: 101024) $2.60

IH Decal, 1", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1", no background, (Item #: 101023) $1.70

$Farmall 460 IH Decal, 3 inch x 3-1\2 inch, Vinyl$
IH Decal, 3" x 3-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 3" x 3-1/2", No background, (Item #: 101025) $10.20

$Farmall 460 IH Decal, 4-1\2 inch x 5 inch$
IH Decal, 4-1/2" x 5" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 4-1/2" x 5", Mylar decal, (Item #: 101095) $5.10

International Decal, 17", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 17" long, Black, Mylar decal, (Item #: 101105) $5.10

$Farmall 460 International Decal, 8-1\2 inch, Mylar$
International Decal, 8-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 8 1/2" long, Black, Mylar decal, (Item #: 101104) $3.40

International Decal Set,10" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 10", (Item #: 101022) $27.10

$Farmall 460 International Decal Set, 1 1\4 inch IH Logo, Vinyl$
International Decal Set, 1 1/4" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-1/4", (Item #: 101018) $2.60

$Farmall 460 International Decal Set, 1 3\4 inchx 1 5\8 inch IH Logo, Vinyl$
International Decal Set, 1 3/4"x 1 5/8" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-3/4", (Item #: 101019) $3.40

International Decal Set, 460 Diesel, Mylar - For International / Farmall tractor model 460, Vinyl decal set use Item #: 100959, (Item #: 101088) $51.00

International Decal Set, 460, Mylar - For International / Farmall tractor model 460, Vinyl decal set use Item #: 100958, (Item #: 101087) $43.60

No
Picture
International Decal Set, 6 1/2"x 7" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo 7", Vinyl Cut, Shaded Outline, (Item #: 101020) $15.30

No
Picture
International Decal Set, 7 1/4"x 8" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 8", (Item #: 101021) $20.30

$Farmall 460 International Harvester Decal, 2-3\4 inch x 3 inch$
International Harvester Decal, 2-3/4" x 3" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, (Item #: 101093) $3.40

$Farmall 460 International Harvester Decal, 2 inch x 2-1\2 inch, Mylar$
International Harvester Decal, 2" x 2-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/2", No background, Mylar decal, (Item #: 101097) $3.40

$Farmall 460 International Harvester Decal, 2 inch x 2-1\4 inch, Mylar$
International Harvester Decal, 2" x 2-1/4", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/4", Mylar decal, (Item #: 101092) $3.40

$Farmall 460 International Harvester Decal, 5-1\2 inch x 6 inch, Mylar$
International Harvester Decal, 5-1/2" x 6", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 5-1/2" x 6", Mylar decal, (Item #: 101096) $5.10

International Harvester Decal, 5" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 5" diameter, Shaded outline, Mylar decal, (Item #: 101099) $5.10

International Harvester Decal, 6" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 6" diameter, Shaded outline, Mylar decal, (Item #: 101100) $6.80

$Farmall 460 International Harvester Decal, 7-1\2 inch, Mylar$
International Harvester Decal, 7-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 7 1/2" diameter, Shaded outline, Mylar decal, (Item #: 101101) $8.50

International Harvester Decal, 9", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 9" diameter, Shaded outline, Mylar decal, (Item #: 101102) $10.20

$Farmall 460 International Hood Decal, 23-1\2 inch, Vinyl$
International Hood Decal, 23-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, Size: 23-1/2", Black lettering, (Item #: 101031) $13.60

International Seat Adjustment Decal, Black and Yellow, Mylar - For International / Farmall tractor models 100 (Deluxe Seat), 130 (Deluxe Seat), 140 (Deluxe Seat), 460, 560, Mylar sticker, yellow and black, (Item #: 101091) $3.40

McCormick International Decal, 10" Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 10" long, Black and white, Vinyl decal, (Item #: 101103) $8.50

$Farmall 460 McCormick International Decal, Hood, White\Black, 7-1\4 inch, Vinyl$
McCormick International Decal, Hood, White/Black, 7-1/4", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 7-1/4" black and white, Vinyl decal, (Item #: 101026) $6.80

Number Emblem, Farmall 460 - For Gas model 460. (Item #: 103931, Ref: 369119R1) $39.10

Side Emblem - For tractor models 460, 560. (Item #: 108484, Ref: 369117R1) $90.00

Drive Train

Axle Seal, Rear - For 2-3/4 inch axles (inside diameter 2-3/4 inch, outside diameter 3-5/8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3/4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Item #: 172589, Ref: 377788R1) $16.10

Axle Seal, Rear Outer - This outer seal measured 3.250 inches inside diameter, 4.139 inches outside diameter, .555 inches thickness. For tractor models 1026, 1066, 1086, 1206, 1256, 340, 3688HC, 460, 504, 706, 756, 766, 806, 826, 856, 966, 986, Hydro 100, Hydro 186. (Item #: 128501, Ref: 378077R91) $24.90

Clutch Shaft Carrier Seal - This clutch shaft carrier seal measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. Fits (340, 460, 504, 656 fits as a clutch shaft carrier seal for forward and reverse transmissions), (544, 606, 665 fits as a forward/reverse transmission seal). Replaces: 350891R91, 358801R91, 358836R91, 370510R91, 371410R91, 515448R91. (Item #: 165141, Ref: 195501M1) $5.48

Gear Shift Boot - Some of the Farmall / International tractors were not factory equipped with a gear shift boot, and it was sold as an extra. This boot is used on models: H, M, 560, I4, I6, ID6, Super MVTA, 2606, HV, MD, T340, T5, MDV, MV, TD6, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MTA, Super MV, Super W4, Super W6, Super WD6, W4, W6, WD6, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 606, 660, B275, 354, 384. It measures 4-3/4 inches tall, 11/16 inch top hole inside diameter and 2-3/4 inches bottom hole. (Item #: 182890, Ref: 64603DA) $26.00

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.90

PTO Disc - For International / Farmall tractor models 330, 340, 460, 504, 560, 606, 660, 2504, 2606, Compatible with International Construction and industrial models 2504, Replaces International OEM number 376825R91, 374032R91, ID: 3-3/4" (95mm), OD: 6-7/16" (163mm), 12 Teeth, (Item #: 153769) $44.60

Ramp Assembly, Bearing Carrier and Overrunning Clutch - This Remanufactured Bearing Carrier and Overrun Ramp Assembly is for tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Additional $25 core charge will be added to your order. (Item #: 204412, Ref: 365402R11) $142.01

Seal, Rear Axle - One 2-1/2 inch diameter seal. For tractor models 300, 330, 340, 350, 460, H, HV, Super H, Super HV. Inside diameter 2.500 inches, outside diameter 3.548 inches, width 0.438 inches. Replaces 358770R91, 360251R91, 377786R1, 377786R92, 43722D. (Item #: 151917, Ref: 377786R1) $15.50

Shift Lever Repair Pin Kit - For International / Farmall tractor models B250, B275, B276, B414, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, W4, W6, W400, W450, WD6, WD9, 300, 330, 340, 350, 354, 364, 384, 400, 424, 434, 444, 450, 460, 504, 560, 606, 660, 2300, Replaces International OEM number 256918R1, 172529, 256919R1, 259918R11, 310662R11, 310664R11, 34878D, 357003R1, 40465DA, 40466DA, 705650R1, (Item #: 167881) $29.00

Torque Ampilifer Carrier - For International / Farmall tractor models Super MTA (s/n 60001-later), 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, Includes pre-installed inner bearings, For a Remanufactured version of this sku use Item #: 204411, (Item #: 151955) $316.00

Torque Amplifier Clutch Carrier Nut - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359897, 35897N, (Item #: 111552) $45.20

Torque Amplifier Gasket Set - For tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686. (Item #: 115574, Ref: 395915) $87.00

Torque Amplifier Primary Sun Gear without Bearing - 23 tooth. For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, (Super MTA serial number 60001 and up). (Item #: 113413, Ref: 361283R32) $188.00

Electrical System

Distributor Cap - Clip type, services 6 cylinder tractors with International distributors. For tractor models 2606, 2706, 2806, 460, 560, 606, 656, 660, 666, 686, 706, 756, 806, 826, 856, Hydro 70, Hydro 86. (Item #: 105298, Ref: 368062R1) $15.00

Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1 (Item #: 178117, Ref: 353894R1) $16.80

Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Item #: 111108, Ref: 353903R1) $6.10

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: 424, 444, 450, W450, 460, 504, 560, 600, 606, 650, 656, 660, 706, 756, 806, 826, 856, 3514, 3616. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $8.90

Distributor, Remanufactured, 368051R - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 756, 806, 826, 856, 2606, 2656, 2706, 2806, 2856, Replaces International OEM number 368051R, Includes new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, (Item #: 203534) $265.01

Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.80

Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20

Generator, Delco Type, 12 Volt - For tractor models 140, 214, 220, 37, 404, 420, 424, 450, 460, 504, 560, 600, 606, 660, 700, 770, 780, 806, 2404, 2424, 2504, 2606, Cub, Lo-Boy, T6, TD6, TD9, Power Unit. Replaces Delco numbers 1100305, 1100335, 1100363, 1100364, 1100369, 1100394, 1100401, 1100409, 1100426, 1100424. Remanufactured. Refundable $25.00 core charge will be added to your order. (Item #: 203181, Ref: TG-59) $370.72

Glow Plug - Sold individually. 0.197 inch tip diameter, 5 inch overall length and 0.311 inch outside diameter where it slides into the head. For combines: 101, 151, 181, 315, 403, 453, 503, 715. For Tractors TD6, TD9, 340, 460, 504, 560, 606, 656, 660, 706, 3514, 3616, 3800, 3850, TD340. Replaces 304131R1, 343977R1, 343894R1, 304131R3, 304131R2. (Item #: 111187, Ref: 304131R3) $17.00

Glow Plug Meter Gauge - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2606, 2656, 2706, Compatible with International Combine (s) 101, 151, 181, 403, 453, 503, 615, 715, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD340, 2500, 2504, 3514, 3616, Replaces International OEM number 370380R91, 370380R92, 378352R91, 404740R1, (Item #: 121659) $49.80

Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $14.30

No
Picture
Pertronix Ignitor Module - For tractor models 460 and 560 with 6-cylinder engines with IH 368051R1 Distributor. CCW Rotation. NOT for use with solid core spark plug wires. (Item #: 105086, Ref: 1461) $166.00

Spark Plug - Spark Plug 18MM Thread Diameter for: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. Replaces OEM number 360942R1. Also replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs (Item #: 111742, Ref: AL386) $3.10

No
Picture
Starter - Delco Replaces OEM 1107543, 1107564, 1108657. TYPE: DR 20MT, 9 teeth, CCW rotation, volt/KW: 12. NOTE :C-221 Gas/LPG, LPG Engine (YR.59-58). Fits these models: 340 DSL (1962-63), 350 DSL (1956-58), 350 DSL (1957), 3514 DSL (1965-66), 3616 DSL (1965-66), 460 DSL (1958-59), 460 DSL (1962-64), 460 GAS, LPG, (1960-61), 460 GAS, LPG, (1960-64), 460 GAS with LPG, (1958-59), 460HC GAS, LPG, (1960-64), 504 DSL (1961-66), 560 GAS with LPG, (1958), 560 GAS with LPG, (1958-64), 560HC GAS with LPG, (1958-64), 606 DSL (1961-66), 606 GAS, LPG, (1961-64), 656 GAS, LPG, (1965-66), 660 GAS, LPG, (1960-61), 660 GAS with LPG (1958-59), T340 (1960-62), TD340 (1962-64), TD340 (1967), 560 GAS with LPG, (1959-64). Refundable $55.00 core charge will be added to your order. (Item #: 203447, Ref: TS-1032) $381.10

No
Picture
Starter - For tractor models (460 Gas, 1958 to 1959), (460, 560, 660, 606, 706 Gas, 1960 to 1967), (T340, 3515 Gas, 1958 to 1959 and 1965 to 1967), (T6 Crawler 1958 to 1963), (F504 Gas 1961 to 1965), (F656 Gas 1965 to 1966) (3616 1965). REBUILT Starter. 12 Volt. Also replaces 1107229, 1107744. (Item #: 203200, Ref: 1107720) $360.50

No
Picture
Starter - Delco (4193) - For International / Farmall tractor models 460 (D, 1960-63), 504 (D, 1961-66), 504 (D, Farmall, 1961-66), 560 (Farmall, Gas and LP1965-66), 606 (Diesel, 1962-67), 606 (Gas and LP, 1962-67), 656 (Gas and LP, 1965-66), 656 (Farmall, Gas and LP1965-66), 3514 (with D-188 Diesel or D-236 Diesel, 1965-66), 3616 (with D-188 Diesel or D-236 Diesel, 1965-66), Replaces Case IH OEM number 336770R91, 374583R91, 381904R91, Replaces Delco Remy Starter number 1107543, 1107564, 1998333, 323-685, Replaces Starter number 4193, Lester 4193, Volts: 12, Teeth: 9, Rotation: Counter Clockwise (CCW), Type: Direct Drive, (Item #: 189444) $465.00

No
Picture
Starter - Delco Style DD (4212) - For International / Farmall tractor models 460, 504, 560, 606, 656, 660, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models T6, T340, 3514, 3616, Replaces International OEM number 374582R91, 377100R91, Replaces Case OEM number 104189A1, A480683Z, Replaces Delco Remy manufacturer number 1107229, 1108321, 1107744, 12301285, 19136156, 1107720, Replaces manufacturer number 4212, 140-747, 140-747A, 91-01-3689, For gas applications, Delco Style Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 9, For a Remanufactured version of this sku use Item #: 203200, (Item #: 160358) $338.18

Starter Drive - Starter drive, services Delco starters: 1107228, 1107275, 1107720, 1108642, 1107229, 1107543, 1107744. For tractor models 404, 460, 504, 560, 606, 656, 660, 706, 2404, 2504, 2606, 2656, 2706. 9 teeth. (Item #: 110776, Ref: 1939109) $40.90

Starter Drive - Delco Style - Ratchet Type - For International / Farmall tractor models Hydro 100, Hydro 186, W450, 350, 350U, 400, 450, 460, 560, 660, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4166, 4186, 6388, 6588, 6788, Compatible with International Combine (s) 815, 915, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 500, Replaces International manufacturer number 1107341, 1108640, 1108646, 1107544, 1108659, 1113034, 1113053, 1113176, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, Replaces Delco Remy Starter Drive number 1877350, Replaces Delco Remy Starter number 1108640, 1108646, 1108336, 1109433, 1107390, 1109425, 10455339, 10455354, 10465416, 10465430, 1107341, 1998392, 1998290, 1998300, 10455323, 1107532, 1998332, 1998375, 1107873, 1109260, 1109271, 1107544, 1108659, 1107779, 1113034, 1113053, 1113176, 1113149, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, 1108475, 1113071, 1113117, 1113118, 10455320, Delco Style, Teeth: 10, Outer Diameter: 39.5mm, Inner Diameter: 14.3mm, Rotation: Counter Clockwise, Overall Length: 96.5mm, Clutch Type: Ratchet, Splines: 3, (Item #: 111104) $33.90

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

Starter Switch - Momentary Push Button Ignition Switch. Rubber boot covers push button, 2 screw type terminals, used extensively on I.H. equipment. Serves as starting, horn or reverse lock out switch. Used on various combines, windrowers, balers, cotton pickers, hay conditioners and grain platforms. Also used on Tractors: IHC: Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 4100, 4156, 4166, 4186; Industrial: 1206, 2656; Crawler: T4, T5, TD5. Replaces 366317R91, 366317R93GV (Item #: 112232, Ref: 366317R93) $7.20

Starting Button - Attaches with eyelets and screws. For tractor models 240, 300, 330, 340, 350, 400, 404, 424, 444, 460, 504, 560, 606, 656, 660, 706, 806, 1206, 4100, 4156, 4166, 4186. (Item #: 112232, Ref: A36948) $7.20

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.50

Tune-up Kit - Tune-up Kit for an IH Distributor, 1963 and later. 6 cylinder engine (C221, C263, C291, C301). For tractor models 460, 560, 656, 660, 706, Hydro 70, Hydro 86, 666, 686, 756, 766, 806, 826, 856. With 18 mm, 1/2 inch reach, 7/8 inch spark plugs (AL 386), points, condenser, rotor and gap gauge. Verify correct spark plug size and type. (Item #: 111813, Ref: IHTK3) $35.80

Tune-up Kit - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Cub 154, Cub 185, H, HV, M, MD, Super A, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 560, Thread: 18 mm, (Item #: 181488) $40.10

Tune-up Kit, Basic - Kit contains: rotor, condenser, points and proper point gap gauge. For tractor models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). YTO-ATK9BIR (Item #: 105296, Ref: ATK9BIR) $19.70

Engine Bearings

No
Picture
Cam Bearing Set - Camshaft bearing kit, 4 bearings. Individual bearings not available. For C291 CID gas 6 cylinder. For engine in tractors 666, 686, 706, 756, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106671, Ref: CBK-H221) $36.10

Camshaft Bearing Kit - 4 bearings. For tractor models 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. All with either C221, C263, C291, C301, D236, D282 6 cylinder engines. Can Be used on C157, C175 and C200 Engines by also purchasing 398019R1 front cam bearing separately. Not for German Diesel Engines. Replaces 130476R91, 130476R92, 130476R93, 70131R1, 70132R1, 70259R2, 70260R1, 70260R2, 70261R2, 70262R1, 71326R1 (Item #: 106671, Ref: CBK-H221) $36.10

Connecting Rod Bearing Set - .020" - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Replaces International OEM number 376667R91, Size: .020", (Item #: 184148) $195.00

No
Picture
IPTO Bearing Cage O-Ring - For International / Farmall tractor models 330, 340, 460, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 252556, (Item #: 176724) $6.90

Main Bearing Set, .010 - .010 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376679R91, 332276R91, 376670R91, 376673R91, YTO MBK221-010 (Item #: 106613, Ref: MBK221-010) $124.00

Main Bearing Set, .010 - Main Bearing Kit (.010 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 376670R91, 332276R91, 376673R91, 376679R91 (Item #: 167378) $110.00

Main Bearing Set, .020 - .020 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376683R91, 332279R91, 376686R91, 376692R91, YTO MBK221-020 (Item #: 106614, Ref: MBK221-020) $122.00

Main Bearing Set, .020 - Main Bearing Kit (.020 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 190746) $222.00

Main Bearing Set - .030 - 0.030 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used for the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382358R91, 332270R91, 367291R91, 367297R91 (Item #: 106615) $193.00

Main Bearing Set, .030 - Main Bearing Kit (.030 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 167101) $88.00

Main Bearing Set, Standard - Standard main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382357R91: 1-367276R91, 1-367282R91, 1-367279R91 and 1-367285R91 YTO MBK221 (Item #: 106612, Ref: MBK221) $113.00

Main Bearing Set, Standard - Main Bearing Kit (standard) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 382357R91, YTO MBK221A (Item #: 185622, Ref: MBK221A) $99.00

Rod Bearing - Rod Bearing in .002. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.372 inches. Replaces YTO CRK221-002 and 367632R11. Sold individually. (Item #: 106486) $12.20

Rod Bearing - Rod Bearing in 0.010. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.364 inches. Replaces YTO CRK221-010 and 376666R11. Sold individually. (Item #: 106487) $7.40

Rod Bearing - Rod Bearing in .020. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.354 inches. Replaces YTO CRK221-020 and 376668R11. Sold individually. (Item #: 106488) $9.80

Rod Bearing - Rod Bearing in .030. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.344 inches. Replaces YTO CRK221-030 and 367631R11. Sold individually. (Item #: 106489) $12.20

Rod Bearing - Rod Bearing in standard. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Standard journal measures 2.374 inches. Replaces YTO CRK221-STD and 367408R11. Sold individually. (Item #: 106485) $13.20

Transmission Shift Pattern Plate - For International / Farmall tractor models 340, 460, 504, 560, 606, 660, 2504, 2606, Replaces International OEM number 371371R1, (Item #: 126759) $26.30

Engine Gaskets

Conversion Gasket Set - For International / Farmall tractor models 454, 460, 544, 574, 606, 674, 2400, 2400A, 2400B, 2500A, 2500B, 2606, 3616, Compatible with International Construction and industrial models 2505B, 3500A, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 398178R92, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, Crankshaft seals included, (Item #: 106724) $145.00

Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 2400, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500B, 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856 (Gas and LP), 340, 504 (Diesel), 350 (W/ GD193 Diesel), 3514 (Diesel, with D188 engine), 3616, 460, 560, 606, 656, 660 (Gas, LP and Diesel, when used as a front crankshaft seal), 706 (Gas, LP and Diesel, when used as a front crankshaft seal, except German Diesel), Hydro 70, Hydro 86 (Gas and LP). Replaces: 117568H1, 119020H1, 129370H1, 273573R91, 317549R91, 357672R91, 391976R91, 606750C91 (Item #: 106642, Ref: 834831M1) $12.20

Full Gasket Set - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Engine (s) C221 (6 cylinder), C263 (6 cylinder), C291 (6 cylinder), C301 (6 cylinder), Includes crankshaft seals, (Item #: 186637) $160.00

Full Gasket Set - For 460, 606, 656, 2606, 2656, 27063514, 3616 with D236 Diesel Engine (Item #: 106721, Ref: FS3843) $205.00

Gasket set, full - For gas C221, C263, C291 and C301 6 cylinder engines. Complete gasket set with crankshaft seals (where required). 1 used per engine. (Item #: GK7799S) $155.94

Head Gasket - For International / Farmall tractor models 460, 560, 606, 656, 706, 2706, 3616, Compatible with International Engine (s) D236 (Diesel), D282 (Diesel), Replaces International OEM number 134400A1, (Item #: 128679) $129.00

Head Gasket Set - For C291 or C301 CID gas 6 cylinder engines in tractors: 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (upper gasket set with head gasket). (Item #: 106689, Ref: VGK7799S) $103.00

Head Gasket Set - For 282 CID 6-cyl Diesel Engines in: 2606, 2656, 2706, 460, 560, 606, 656, 660, 706. (Upper gasket set with head gasket). (Item #: 106690, Ref: VGK8334SB) $136.00

Head Gasket Set - Used on International D301, UD236, UD282, UDT282, D236, D282, DT282 6 Cylinder Engines. It includes nozzle and precup gaskets. Replaces 134403A1 (Item #: 106690, Ref: HS3843) $136.00

Oil Pan Gasket - Oil Pan Gasket. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106706, Ref: 369984R1) $10.80

Push Rod Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301, D236, D282, Replaces International OEM number 369982R1, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128736) $16.30

Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $21.90

Valve Cover Gasket - For International / Farmall tractor models 460, 560, 606, 656, 706, 2706, 3616, Compatible with International Engine (s) D236 (Diesel), D282 (Diesel), Replaces International OEM number 278308R3, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128680) $12.60

Valve Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301 (Gas), Replaces International OEM number 369983R2, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128683) $10.50

Engine Rebuild Kits

No
Picture
Basic Engine Overhaul Kit, Less Bearings - Basic Engine Kit, less bearings (221 CID Gas 6-cylinder engine). Model 460 to serial number 35093 (for engines with stepped head piston, intake valve head diameter 1-21/32 inch). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 184463, Ref: BEKH1169-LCB) $917.00

No
Picture
Basic Engine Overhaul Kit, Less Bearings - Basic Engine Kit, less bearings (221 CID Gas 6-cylinder engine). Model 460 serial number 35094 and up. (For engines with stepped head piston, intake valve head diameter 1-21/32 inch). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 184461, Ref: BEKH1169A-LCB) $917.00

Basic Engine Overhaul Kit, Less Bearings - For tractor models 460, 606, 2606 engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. 1.125" piston pin, liner with .188 inch thickness x 4.165" O.D. flange, 3.75" thrust main bearing flange diameter. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130598, Ref: BEKH1173-LCB) $1119.01

No
Picture
Basic Engine Overhaul Kit, Less Bearings - For tractor models 460 engine serial number 13754 and up and models 606, 6026 engine serial number 13754 to serial number 16620. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130598, Ref: BEKH1173A-LCB) $1119.01

No
Picture
Basic In-Frame Engine Kit - In Frame Engine Kit. (221 CID Gas 6-cylinder engine). Model 460 to serial number 35093 (for engines with stepped head piston, intake valve head diameter 1-21/32 inch). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189587, Ref: BIFH1169) $843.00

No
Picture
Basic In-Frame Engine Kit - For tractor models 460 All (D236 CID Diesel 6-cylinder engine. Cupped head piston) and Models 606, 2606 to engine serial number 16620. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189673, Ref: BIFH1173) $1109.01

Engine Cylinder Sleeve - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2504, 2606, 2656, 2706, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 403, 615, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD9, TD9B, TD340, 2500, Compatible with International Engine (s) D166 (early), D188 (early), D236, D282 (.875" pin, wide flange liner), DT282 (1.125" pin, wide flange liner), Replaces International OEM number 278272R1, Bore: 3.6875", Flange O.D.: 4.165", Flange Thickness: .1875", (Item #: 108753) $67.00

No
Picture
Engine Overhaul Kit, Less Bearings - For tractor models 460 Engine serial number 5611 to serial number 10983. (D236 CID Diesel 6-cylinder engine. Cupped head piston.) Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK1173-LCB) $1400.93

Engine Rebuild Kit - Less Bearings - Step Head Piston, C221 - For International / Farmall tractor model 460, Compatible with International Engine (s) C221 (gas), Bore: 3.5625", Stroke: 3.6875", Step head piston, 3.75" thrust main bearing flange diameter, Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106615, (Item #: 130597) $714.00

No
Picture
Overhaul Kit - 6-Cylinder Diesel, 236 CID. 3-11/16 inch standard bore. Cupped-Head Piston, 4.165 inch Sleeve Flange Diameter, 3-3/4 inch Thrust Bearing Flange Diameter. Engine Overhaul Kit, less bearings. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, intake and exhaust valves, springs, guides, valve keys. For 460 Series (Engine serial number 5611 to 10983). (Item #: EOK1173B-LCB) $1416.65

Piston - Standard - For International / Farmall tractor model 460 (engine s/n 35093-later), Compatible with International Engine (s) C221, Replaces International OEM number 367641R1, Bore: 3.5625", Includes: step head piston, pin, retainers, Sold per cylinder, (Item #: 128682) $82.00

No
Picture
Valve Overhaul Kit - Fits 460, 606, 2606, 560, 660 (gas 6 cylinder C221, C263). Kit includes valves (intake valve head DIAMETER 1-21/32 inch), Stellite Exhaust Valve, valve springs, valve keys, valve guides. (Item #: VOKH221S) $298.18

Valve Overhaul Kit - Fits 460 engine serial number 5611 to 10983, 560 engine serial number 6766 to 29264, 660 engine serial number 4370 to 29264, (6 cylinder D236, D282 CID). Kit includes valves, valve springs, valve keys, valve guides. (Item #: VOKH282A) $287.72

No
Picture
Valve Overhaul Kit - Fits 460 (engine serial number 10984 and up), 560, 660 (engine serial number 29265 to 40698), 6 cylinder Diesel D236, D282. Kit includes 12 - 315744R1 valve springs, 12 - 278300R1 valve guides, 24 - 70209103 valve keys, 6 - 278301R1 intake valves, 6 - 278302R1 exhaust valves. (Item #: 185433, Ref: VOKH282B) $328.00

Engine Parts

Belt Pulley Block Off Plate - For International / Farmall tractor models H, W4, 300, 350, 460, Replaces International OEM number 49618DA, (Item #: 126476) $41.80

Bushing, Connecting Rod - Connecting rod bushing used with 1.250 inch wrist pin only. Does not fit .875 inch wrist pin. For tractor models 460, 560, 606, 660 (engine serial number 40699 to serial number 48821), 656, 706, 2606, 2656, 2706 (to serial number 44821). (Item #: 115590, Ref: 306708R1) $11.00

Camshaft - For International / Farmall tractor models Hydro 70, Hydro 86, 460 (engine s/n 5610-later), 560 (engine s/n 6765-earlier), 606, 656, 666, 686, 706, 756, 766, 806, 826, 856, 2606 (engine s/n 12799-13753), 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine (s) 101 (engine s/n 11028-later), 151, 181, 205, 303, 315, 403, 453, 503, 615 (engine s/n 44821-earlier), 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6 (engine s/n 36694-56634), TD6 (early), TD9, TD9B (engine s/n 6902-earlier), 3800, 3850 (engine s/n 71777-later), Compatible with International Engine (s) C221, C263, C291 (late), C301, D236 (narrow flange liners), D282, DT282, D301 (narrow flange liners), Replaces International OEM number 367229R1, (Item #: 160894) $286.00

Camshaft Gear, Used - For International tractor models Hydro 70, Hydro 86, 340, 454, 460, 504, 544, 560, 574, 606, 656, 660, 666, 674, 686, 756, 766, 806, 826, 856, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Combine(s) 315, 403, 503, 615, 715, Compatible with International Harvester(s) 414, 420, 616, 622, Compatible with International Hay Cutting(s) 375, Replaces International OEM number 312500R1, 367240R1, Teeth: 54, For a new version of this item use Item #: 121567, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435782) $97.01

Clutch Shaft Coupler - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, For applications with mechanical TA, Coupler Does Not Include Part 364411R1 Snap Ring, (Item #: 113408) $59.00

Connecting Rod Bolt - For International / Farmall tractor models 330 (1/57-12/58), 340 (Farmall, Diesel, 1/58-12/63), 340 (Diesel, 1/58-12/63), 340 (Utility, Gas, 1/58-12/63), 460 (Diesel, 1/58-12/63), 460 (Utility, Gas, 1/58-12/63), 460 (Farmall Diesel, 1/58-12/60), 460 (Farmall, Gas, 1/58-12/63), 504 (Farmall 1/60-12/68), 504 (Diesel, 1/60-12/68), 560 (Farmall, Diesel, 1/58-12/63), 560 (Diesel, 1/58-12/63), 560 (Utility, Gas, 1/58-12/63), 606 (1/61-12/67), 660 (Diesel, 1/63-12/67), 660 (Gas, 1/59-12/63), 706 (Farmall, 1/63-12/67), 706 (1/63-12/67), 806, 806 (Farmall), 2504, 2606 (Diesel, 1/61-12/67), 2706 (s/n 1/63-12/67), Compatible with International Combine (s) 303 (Bean Special, 1/62-12/68), Compatible with International Harvester (s) 55 (With Row Crop Unit), 350 (With Row Crop Unit), 414, 420, 550 (With Row Crop Unit), 650, Replaces International OEM number 316366R1, (Item #: 165562) $21.20

Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01

Connecting Rod, Used - For International tractor models 330, 340, 460, 504, 560, 656, 660, 706, 2500, 2504, 2606, 2706, 3514, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D166, D188, D236, D282, D301, Replaces International OEM nos 306280R12, Replaces Casting nos 306280, 306280R, 306280R1, Diesel Engines, Length Center to Center: 7.250", Housing Bore: 2.4995" - 2.5000", Pin Diameter: 1.1252" - 1.1258", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498382) $50.01

Constant Mesh Gear, Used - For International tractor models 300, 330, 340, 350, 460, 504, 606, 2504, 2606, Replaces International OEM nos 360567R1, Teeth: 61, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439823) $140.01

No
Picture
Crankshaft, Remanufactured, 367266R - For International / Farmall tractor models 460, 606 (Gas or Diesel), Replaces Casting number 367266R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200243) $668.01

Crankshaft Timing Gear - For tractor models (454 with C-157), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236), (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706 with C-291), (806, 826, 856 with C-301). Replaces: 367272R1 (Item #: 121570, Ref: 367272R1) $214.30

No
Picture
Cylinder Head, Remanufactured, 367188R - For International / Farmall tractor models 460, 560 (Gas), Replaces International Casting number 367188R, 373423R, Engines C221, C263, Cylinders 6, Casting No. 367188R, 373423R, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200203) $1050.01

No
Picture
Cylinder Head with Valves, Remanufactured, 367188R - For International / Farmall tractor models 460, 560 (Gas), Replaces International Casting number 367188R, 373423R, Engine (s): C221, C263, Cylinders: 6, Casting Number (s): 367188R, 373423R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 207040) $1350.01

Drive Shaft Coupling, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, Splines: 14, For a new version of this item use Item #: 113408, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435618) $31.01

No
Picture
Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $5.00

No
Picture
Fan Pulley, Used - For International tractor models 460, 560, 660, Compatible with International Engine(s) C263, Replaces International OEM nos 368509R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441261) $120.01

Flywheel with Ring Gear, Used - For International tractor models 460, 606, 2606, Replaces International OEM nos 367505R11, 367505R21, 367042R1, Fits Gas and Diesel Engines., Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431347) $291.01

No
Picture
Governor Thrust Bearing Assembly - This 3 piece bearing assembly slides onto the governor assembly. For models cub, A, B, C, Super C, 560, Super AV, 184, AV, Bn, Cub Lo-Boy, Super A, 100, 130, 140, 154, 185, 200, 230, 240, 330, 340, 404, 424, 444, 460, 504. Also replaces 55314D. (Item #: 184444, Ref: 43481D) $52.00

No
Picture
Intake Valve - For International / Farmall tractor models 460 (Engine C221 CID, s/n 35093-earlier), 460 (Engine C221 CID, s/n 35094-later), 560 (Engine C263 CID, s/n 36693-earlier), 560 (Engine C263 CID, s/n 36694-later), 606 (Engine C221 CID, s/n 35093-earlier), 606 (Engine C221 CID, s/n 35094-later), 660 (Engine C263 CID, s/n 38981-earlier), 660 (Engine C263 CID, s/n 38982-later), 2606 (Engine C221 CID, s/n 35093-earlier), 2606 (Engine C221 CID, s/n 35094-later), Compatible with International Combine (s) 303 (Engine C221 CID), Compatible with International Harvester (s) 414 (Engine C263 CID), 420 (Engine C263 CID), Compatible with International Engine (s) C221 (CID), C263 (CID), Replaces International OEM number 234275R1, Diameter: 1.66", (Item #: 173268) $15.00

Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.90

Push Rod, Used - For International tractor models 330, 340, 350, 460, 504, 560, 606, 660, 706, 806, 2504, 2606, 2706, Compatible with International Combine(s) 303, Compatible with International Harvester(s) 55, 414, 420, 550, 650, Replaces International OEM nos 164436R91, Length: 12 3/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430417) $7.51

Retainer - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 167178, Ref: 48703D) $8.40

Ring Gear, Flywheel - This Flywheel Ring Gear measures 12.332 Inch Inside Diameter, 13.560 Inch Outside Diameter, Has 134 Teeth and is .485 Inches wide. Fits International Tractors; 300 diesel, 330 diesel, 340 diesel, 350 diesel, 424 gas, 444, 460, (504 diesel serial number 13675 and earlier, gas serial number 29632 and earlier), 544 with Synchromesh Transmission, 606 gas, 656, 666, 686, 2424, 2444, 2544 with Synchromesh Transmission, 2606, 3514 engine serial number 29632 and earlier. Also fits Construction and Industrials; T340, 4000. Replaces 367042R1 (Item #: 121882, Ref: 367042R1) $61.00

No
Picture
Ring Gear, Flywheel - 125 Teeth For M, MD, Super M, Super MD, W-6, WD-6, 400, 450 Gas or Diesel460, 660 Diesel (Item #: 103907, Ref: R1849) $71.00

Set Of Three Sungears - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, (Item #: 113409) $155.00

TA Clutch Carrier, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359895R3, For a new version of this item use Item #: 165256, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441430) $45.01

Torque Amplifier Carrier - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces Case IH OEM number 359895R3, Teeth: 27, Flywheel Step: .900", (Item #: 165256) $167.00

No
Picture
Valve Cover, Used - For International tractor models 460, 560, 660, 706, 2606, 2706, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D236, D282, D301, Replaces International OEM nos 278307R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 440572) $101.01

No
Picture
Valve, Exhaust - This exhaust valve is for tractor models 460 (221 CID Gas 6-cylinder engine)and Models 560 and 660 (C263 CID Gas 6-cylinder engine). Price shown is for each, sold only in multiples of 2 items. Order one and you will receive one valve. Order two and you will receive 2 valves. (Item #: 128502, Ref: 367191R2) $25.00

No
Picture
Valve, Exhaust - Exhaust Valve for tractor models 460. (D236 CID Diesel 6-cylinder engine. Cupped head piston and models 560 engine serial number 6766 to serial number 40698 and 660 engine serial number 4370 to serial number 40698. (D282 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 173263, Ref: 278302R1) $21.20

Valve Guide - VALVE GUIDE For 2504, 2606, 2656, 2706, 3514, 460, 504, 560, 606, 656, 660, 706. (Item #: 173029, Ref: 278300R1) $10.10

Valve Guide - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Replaces International OEM number 237248R1, (Item #: 128515) $5.70

No
Picture
Valve, Intake - Intake Valve. For tractor models 460. (D236 CID Diesel 6-cylinder engine. Cupped head piston and models 560 engine serial number 6766 to serial number 40698 and 660 engine serial number 4370 to serial number 40698. (D282 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 278301R1) $9.75

No
Picture
Valve, Intake Set - Set of 6 Intake Valves. For model 460 (221 CID Gas 6-cylinder engine) and models 560 and 660 (C263 CID Gas 6-cylinder engine). (Item #: 234275R1) $61.85

Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $57.00

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 2606, 460, 560, 606, 660. Contains: springs, guides, locks, (no valves). (Item #: 131580, Ref: VSKH221) $275.00

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 460, 560, 660. Contains: springs, guides, locks, (no valves). (Item #: VSKH282A) $141.92

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 2606, 2656, 2706, 460, 560, 606, 656, 660, 706. Contains: springs, guides, locks, (no valves). (Item #: VSKH282B) $150.76

No
Picture
Valve Spring - For International / Farmall tractor models 460, 606, Compatible with International Construction and industrial models 2504, 3514, Replaces International OEM number 315744R1, (Item #: 173818) $5.80

No
Picture
Valve Spring - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 560, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 50, 101, 151, 181, 205, 303, 315, 403, 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models TD340, 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, C221, C236, C263, C291, C301, D166, D236, D282, DT282, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 367192R1, (Item #: 185589) $4.70

Valve Train Kit - For International / Farmall tractor models 460, 560, Compatible with International Combine (s) 101 (s/n 11028-later), 181 (s/n 44821-earlier), 403 (s/n 44821-earlier), 615 (s/n 44821-earlier), Compatible with International Harvester (s) 414 (s/n 44821-earlier), 420 (s/n 44821-earlier), Compatible with International Construction and industrial models TD9B (s/n 6902-earlier), Compatible with International Engine (s) D236, D282, DT282, Kit includes: intake valves, exhaust valves, valve springs, . valve guides, and valve keepers, (Item #: 120314) $322.00

No
Picture
Valve Train Kit - For International / Farmall tractor models 460, 606, 2606, Compatible with International Construction and industrial models 3616 (gas), (Item #: 120315) $290.00

Valve Train Kit - For International / Farmall tractor models 460 (engine s/n 5610-later), 560, 606, 656, 660, 706, 2606, 2656, 2706 (engine s/n 44822-71777), 3616 (engine s/n 16620-later), Compatible with International Combine (s) 101 (engine s/n 11028-later), 151, 181, 315, 403, 453, 503, 615 (engine s/n 44821-later), 715 (s/n 23000-earlier), Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD9 (92 series), TD9B (engine s/n 6903-11440), 3800, 3850 (engine s/n 71777-later), Compatible with International Engine (s) D236, D282, DT282, D301 (all 6 cylinder diesel), For applications with rotator below spring, Kit includes: Intake and exhaust valves, guides, springs and keepers, Intake Valves: 1.680" head diameter, 6.040" length, 45 degrees, Exhaust Valves: 1.370" head diameter, 6.060" length, 45 degrees, (Item #: 120319) $311.00

No
Picture
Valve Train Kit - For International / Farmall tractor models 460, 560, 606, 660, 2606, 3616, Compatible with International Combine (s) 205, 303, 315, 403, Compatible with International Harvester (s) 414, Compatible with International Engine (s) C221, C263, Includes: Valve Keeper, Intake Valve, Valve Guide, Exhaust Valve, Valve Spring, Valve Guide and Valve Rotator, (Item #: 169083) $345.00

Engine Pistons and Sleeves

Cylinder Sleeve - Used on C221 gas engines on 460, 606, 2606, 3616 and C263 gas engines on 560, 656, 660, 706, 2656, 2706, 3600A, 3800, 3850, this is a standard bore cylinder sleeve. It measures; Bore Diameter: 3.5625 inches / 90.4875mm, Flange Outer Diameter: 4.052 inches / 102.9208mm Flange Width: 0.189 inches / 4.8006mmm, Sleeve O.D. at Barrel: 3.6890 inches / 93.7006mm, Length: 7.625 inches / 193.6750mm. Replaces 367645R1, 3803698, RP141294, SD372 (Item #: 128647, Ref: 367645R1) $62.00

Piston Pin Bushing - Piston pin bushing, 4 or 6 used per engine depending on application. .875 inch inside diameter, .935 inch outside diameter. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2856, 300, 350, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 109736, Ref: 364913R1) $7.10

Sleeve and Piston Kit - Set of 6. For tractor models 460. (D236 CID Diesel 6-cylinder engine. Cupped head piston) and models 606, 2606 to engine serial number 16620. Sleeves, pistons and rings, pins and retainers. For 3-11/16 inch standard bore. (Item #: PK173) $993.60

Sleeve and Piston Set - Sleeve and Piston Set. For tractor models (221 CID Gas 6-cylinder engine). Model 460 and U221 Power Unit. Sleeve, piston and rings, pin and retainers. For 3-9/16 inch standard bore. For model 460. Compression height 2.328 inches. Uses pin bushing part number 364913R1. Sold per cylinder. 6 required for complete engine. (Item #: 192297, Ref: PK169) $166.00

Engine Rings

Piston Ring Set - .030" Oversize - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Standard Bore: 3.5625", Ring Size: .030” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 120862, (Item #: 120861) $31.98

Piston Ring Set - .040" Oversize - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Standard Bore: 3.5625", Ring Size: .040” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 120861, (Item #: 120862) $42.80

No
Picture
Piston Ring Set, For Single Cylinder - PISTON RING SET For 2606, 460, 606 with 236 CID 6 Cylinder Diesel, 3 11/16 inch bore, 4.165 inch Sleeve Flange Diameter, 3.75 inch Thrust Bearing Flange. Contains 1/8 inch top keystone ring, 1 compression 1/8 and 1 compression 1/4. Order quantity of six for entire engine. (Item #: 108754, Ref: PRS173) $84.00

Piston Ring Set - Standard - 2 Cylinder - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2504, 2606, 2656, 2706, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 315, 403, 615, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD6, TD9B, TD340, 2500, Compatible with International Engine (s) D166, D188, D236, D282, DT282, Bore: 3.6875", Compression Rings per Piston: (2) @ .125", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Half Keystone, Chrome 10 Degree, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a 2 cylinder set, (Item #: 128966) $75.00

No
Picture
Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Replaces International OEM number 539379R2, Bore: 3.5625", Ring Size: Standard, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .030" use Item #: 120862, (Item #: 108033) $16.70

Exhaust System

Exhaust Manifold Pipe - 2 1/2 inch inside diameter x 2 15/16 inch outside diameter x 18 used with 384290R1 manifold. For tractor models 460, 560, 606, 660, 686, 656, 666, 706, 756, 766, 806, 826, 2826, 2856, Hydro 70, Hydro 86, 856. (Item #: 113422, Ref: 383974R2_) $32.40

Exhaust Pipe - For tractor models 2544, 2656, 460, 544, 560, 656, 660. (Item #: 126744, Ref: 369613R1) $31.20

$Farmall 460 Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome$
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Style: Curved, Inlet I.D.: 2-3/8", O.D.Pipe: 2-1/2", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115481) $165.88

$Farmall 460 Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome$
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number A29991, Style: Curved, Inlet I.D.: 2-3/8", O.D. Pipe: 4", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115486) $209.00

$Farmall 460 Exhaust Stack - 2-3\8 inch X 36 inch, Straight Chrome$
Exhaust Stack - 2-3/8" X 36", Straight Chrome - For International / Farmall tractor models Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number 62476D, Style: Straight, Inlet I.D.: 2-3/8", O.D. Pipe: 3", Length: 36", Chrome Plated, Eliminates Muffler, (Item #: 115487) $134.11

Exhaust Stack, Chrome, Curved - Double wall. 2 3/8 inch inlet inside diameter, 27 inches overall length, 3 1/2 inches outside diameter. For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Item #: 124224, Ref: R4451) $251.00

Exhaust Stack, Chrome, Straight - Double wall, 2 3/8 inch inlet, 3 1/2 inch outlet, 24 inches overall length. For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Item #: 124225, Ref: R4450) $200.00

Manifold - This Manifold for gas intake with heat valve assembly is for models 460, 560, 656, 666, 706, 756, 806, 826, 856, 2756, 2826, 2856, Hydro 70, Hydro 86. Replaces OEM number 393705R11. (Item #: 101554, Ref: R2661) $221.00

Manifold, Exhaust - For tractor models: 666, 686, 706, 756, 766, 806, 826, 856, 2826, 2856, Hydro 70, Hydro 86 all with C263, C291 or C301 Gas Engines. This also fits 460, 560, 606, 656, 660 if you cut the hole in the hood larger, or if you use R0057A offset adapter. Gasket set is R0057G, If needed please add to your order. (Item #: 101556, Ref: 384290R1) $234.00

Manifold Heat Control Spring - Used on Farmall and International models 560, 806, 2606, 2656, 2706, Hydro 70, 2756, 2806, 2826, Hydro 86, 460, 606, 656, 660, 666, 706, 756, 766, 826, 856, 686, this part replaces 82958R2, 82958R1 (Item #: 179404, Ref: 82958R2) $36.50

Manifold Heat Control Weight - Made of cast iron. For gas Models: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856. (Item #: 121566, Ref: 85699R1) $23.80

Manifold, Intake - This Intake manifold is for tractor models: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2826, 2856, Hydro 70, Hydro 86 all with C263 or C291 gas engines. MIncludes Heat Valve Assembly. Replaces 367261R11 383705R11, IHS154. (Item #: 101554, Ref: 393705R11) $221.00

Muffler - Vertical muffler for gas and diesel tractor, fits engines C200, 221, C263, D166, D188, D236, D239, D282. Inlet inside diameter 1-7/8 inch, outlet outside diameter 1-7/8 inch length 22-1/2 inches, diameter 4-1/2 inches, round body. For tractor models 544, 2544, 460, 606, 2606, 560, 656, 660, 2656, 340 For 2504, 2544, 2606, 2656, 340, 460, 504, 544, 560, 606, 656, 660, 664. (Item #: 100806, Ref: 371039R91) $59.00

Muffler - Horizontal Exhaust Inlet inside diameter 1 7/8 inch, outlet outside diameter 2 inches, overall length 22 1/2 inches. For International 460, 460 Grove, 606 with C221 Gas or D236 Diesel Engines 504 (from serial number 3104) with D188 Diesel 560, 656, 660 with C263 Gas or D282 Diesel Engines. OEM number use R1750 inlet clamp, use R1751 outlet clamp. (Item #: 100806, Ref: R1658) $59.00

Muffler, Aluminized - Vertical muffler for gas tractor, fits engines C221 and C263. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, length 29 inches, diameter 6 inches, round body. Uses MC212 Muffler Clamp. For tractor models H, M, MD, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 450, 606, 2606, 656, 2656. Diesel engines D166, D188, D236, D282, models 340, 504, 2504, 3514, For 2500, 2504, 2606, 2656, 340, 3514, 3616, 450, 460, 504, 606, 656. Replaces 350601R95, 370773R91, 357288R92, 370644R91, 403551R1. For a black version order Item# 100807 (Item #: 185584, Ref: 370644R92) $42.30

Muffler, Black - This is a black version of 370644R92. Vertical muffler for gas and diesel applications.Fits engines C221 and C263. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, length 29 inches, diameter 6 inches, round body. Uses MC212 Muffler Clamp. For tractor models H, M, MD, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 450, 606, 2606, 656, 2656. Diesel engines D166, D188, D236, D282, models 340, 504, 2504, 3514, For 2500, 2504, 2606, 2656, 340, 3514, 3616, 450, 460, 504, 606, 656. Replaces 350601R95, 370773R91, 357288R92, 370644R91, 403551R1 (Item #: 100807) $34.30

Muffler Clamp - Muffler clamp. For 100, 130, 140, 200, 230, 240, 340, 404, 424, 460, 504, 560, 606, 656, 660, 664, A, B, C, Super AV, Super C, Super A bad part (Item #: 180044, Ref: 48889DA) $13.50

Muffler Clamp With Hardware - Muffler clamp with hardware. 2 1/2". For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, 706, H, HV, M, MD, Super H, Super HV, Super M, Super MD, Super MTA, Super W6, W4, W6, WD6. (Item #: 178185, Ref: 350602R1) $14.50

$Farmall 460 Muffler Eliminator - 2-3\8 inch X 24 inch, Straight Chrome$
Muffler Eliminator - 2-3/8" X 24", Straight Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Inlet I.D: 2-3/8", O.D. Pipe: 3", Length: 24", Straight Pipe, Chrome Plated, Eliminates Muffler, (Item #: 115491) $81.17

Muffler Oval - Muffler. Vertical muffler for tractors. 6 inch. Oval body replaces oval body mufflers. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, total length 29 inches, diameter 6 inch round body. For gas tractor models: H and Super H, M and MV Super M and Super MTA, W4 and Super W4, W6 and Super W6, W6TA, (300 and 350 with C-175 gas), (400 and 450 with C-281 gas or D-281 diesel), (460 and 606 with C221 gas or D-236 diesel), (560 with C-263 gas or D-282 diesel). (Item #: 100821, Ref: 403551R1-OVAL) $69.00

Muffler - Restoration Quality - For International / Farmall tractor models 340, 460, 504, 544, 560, 606, 656, 660, 2606, 2656, Replaces International OEM number 370644R91, 370773R91, 403551R1, High Temperature Paint, IH logo and part number stamped to muffler, Inlet Length: 2.063", Inlet ID:2.400", Inlet OD: 2.540", Shell Length: 12", Shell Diameter: 6", Outlet Length: 13", Outlet OD: 2-1/2', Overall Length: 27-1/2", (Item #: 164540) $88.00

Offset Exhaust Manifold Adapter - Used with 384290R1 manifold to realign the exhaust with the hole in the hood, on models 560, 2606, 460, 606, 660. This is a 2 inch NPT adapter designed to fit and offsets the pipe and steps down the diameter so that the exhaust pipe is in the same place and has the same diameter as a factory exhaust (Item #: 125212, Ref: R0057A) $45.00

Stainless Steel Muffler - Show Quality - For International / Farmall tractor models 340, 460, 504, 544, 560, 606, 656, 660, 2606, 2656, Replaces International OEM number 370644R91, 370773R91, 403550R1, Polished Stainless Steel, Inlet Length: 2.063", Inlet ID: 2.400", Inlet OD: 2.540", Shell Length: 12", Shell Diameter: 6', Outlet Length: 13", Outlet OD: 2-1/2", Overall Length: 27-1/2', (Item #: 164541) $197.87

Fuel System / Air Intake

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: M, MD, WR9S, Super WD9, 400, 450, W400, W450, 460, 504, 544 diesel, 455 diesel, 2544 diesel, 5606, Gas powered combines: 403 and 453 Hillside, 503, 615, 715. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794 (Item #: 157279, Ref: R28794) $8.20

Cable - Choke - For International / Farmall tractor models 460, 544, 606, 2544, 2606, Replaces International OEM number 369689R93, Length: 48-1/2", (Item #: 161898) $26.70

Cable - Choke - For International / Farmall tractor model 460 (Farmall, s/n 501-9241), Replaces International OEM number 374251R93, 372908R91, Length: 68-3/4", (Item #: 161901) $30.40

Carburetor Float - Float. For Updraft International Carburetors with throat size 1-1/4 inch or 1-3/8 inch. Dimensions: 2 3/16 inch length x 1 3/16 inch height, outside diameter 3 1/2 inches. For 2606, 2706, 300, 350, 400, 450, 460, 560, 600, 606, 650, 660, 706, M, MV, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6, W9, WR9, WR9S. (Item #: 107990, Ref: 47398DX) $18.80

Carburetor Kit, Comprehensive - This comprehensive carburetor kit is for IH Carburetor number 367258R92. For Farmall tractor model 460. The kit contains all the parts shown. (Item #: 184420, Ref: R7862) $81.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 367258R91, 367258R92. For the following tractor models: 460. Add $200.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203325, Ref: 1432-CARB) $325.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 381984R91, 367258R92, 367259R92, 380956R93, 381983R91, 381984R95, 389511R92. For the following tractor models: 460. Add $200.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203325, Ref: 1441-CARB) $325.00

Choke Cable - 71 inches total length. For tractor models (Farmall 400, 450), 460 Grove, (Farmall 560 serial number 14819 and up, IH 560 serial number 2071 and up), (660 serial number 1349 and up), (706, 756, 806, 826, 856 all LP). Replaces 363710R93. (Item #: 113396, Ref: 374218R92) $20.10

Choke Cable - For International / Farmall tractor models 460, 656 (LP), 766, 806, 856, 2806, 2856, Replaces International OEM number 374219R93, Overall Length:68-1/2", Mount to Mount: 65", (Item #: 113397) $21.80

Diesel Fuel Filter - Fuel filter element, cartridge type, final filter. For 2504, 2606, 2656, 2706, 2806, 330, 340, 460, 504, 560, 606, 656, 660, 706, 806. Replaces 610309C91 (Item #: 111124, Ref: 304101R91) $19.30

Fuel Filter Housing Purolator, Used - For International tractor models 340, 460, 560, 660, 706, 806, 1206, 2606, 2706, 2806, 21206, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D188, D236, D282, D301, D361, DT361, Replaces International OEM nos 304100R91, 347066R91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441826) $52.01

Fuel Injection Pump, Remanufactured, 702154C91, Roosa Master, DBGFC629-1AE - For International / Farmall tractor model 460, Replaces International OEM number 702154C91, Replaces Roosa Master manufacturer number DBGFC629-1AE, DBGFC629-27AE, DBGFC629-54AE, (Item #: 210003) $1310.01

Fuel Injector, Remanufactured, 310388 - For International / Farmall tractor models 330, 340, 460, Replaces International OEM number 310388, (Item #: 210532) $144.01

Fuel Line With FTG - Fuel line for gas engines is 41 inches long. These gas lines easily flex, eliminates metal tubing, vibration. For 460, 560, 706, 806 (Item #: 112539, Ref: FLM41) $28.80

Fuel Pipe Coupling Nut - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, F12, F14, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, Super A, Super C, Super H, Super M, Super W4, TD6, TD9, W4, W6, W12, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 686, 706, 756, 806, 826, 856, 2444, 3514, 3616, Compatible with International Combine (s) 303, 403, 503, 615, 715, Replaces International OEM number 29899D, 700155R11, 700153R11, 1/2"-20 Hi-duty tube fitting, 5/16" O.D., (Item #: 112642) $3.47

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 13193D. Gasket may be cork or rubber depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces A11209 and 357958R1. Will fit the following modelsusing/ 1.280 inch long glass bowl: A, Super A, Super A-1, Super AV, Super AV-1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, Hydro 100, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 454, 460, 464, 504, 544, 574, 606, 656, 656, 674, 706, 756, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1566. Replaces A11209 and 357958R1. (Item #: 105382, Ref: 9N9162) $3.20

Fuel Sending Unit - Stewart Warner - For International / Farmall tractor models 444, 460, 560, 660 (use with Stewart Warner Gauge 369607R93), Compatible with International Construction and industrial models 2444, Replaces International OEM number 1341373C1, 369608R92, 32 Ohm full to 244 Ohm empty, Will not work with aftermarket gagues, Some applications may require adjusting the limiting tab for full gauge reading., Use 151009 for tractors with Rochester gauges, (Item #: 119749) $61.00

$Farmall 460 Fuel Stop\Shutoff Cable$
Fuel Stop/Shutoff Cable - For International / Farmall tractor models 460 (s/n 9242-later), 560, 656, 660, 2656, Replaces International OEM number 374220R91, 372423R91, 374221R91, If replacing 374221R91 or 372423R91 you may need to cut cable to length, Overall Length: 77-1/2", Mount to Mount: 27-1/2", (Item #: 128530) $23.90

No
Picture
Fuel Strainer Assembly - For H, M, MD, 460, 560, 660, 656. Fuel Strainer Assembly. Single 1/8" pipe connection. S61581 (Item #: 105393, Ref: I379832R91) $22.00

$Farmall 460 Fuel Strainer\Water Trap Bail$
Fuel Strainer/Water Trap Bail - For International / Farmall tractor models MD, Super MTA, TD6, WD6, WD9, 400, 450, 460, 560, 606, 660, Compatible with International Harvester (s) 616, 622, Replaces International OEM number 370785R91, 165373H1, 60878DX, 54760D, (Item #: 126522) $39.94

Injection Line, Cylinder 1 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. Replaces 278702R11 (Item #: 162712, Ref: 278702R21) $26.60

Injection Line, Cylinder 2 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162713, Ref: 278703R11) $12.98

Injection Line, Cylinder 3 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162714, Ref: 278704R11) $18.98

Injection Line, Cylinder 4 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162715, Ref: 278705R11) $21.10

Injection Line, Cylinder 5 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162716, Ref: 278706R11) $27.00

Injection Line, Cylinder 6 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162717, Ref: 278707R11) $33.80

Injector - This remanufactured injector comes as pictured with injector, o-ring and 2 metal flat washers. For tractor models 340, 460, 560, 656, 660, (706 with D282 engine). Replaces 279263R91, 310388R91. DOES NOT INCLUDE GLOW PLUG OEM part number 304131R2. Refundable $75 core charge will be added to your order. Replaces 310389R1, 332496R91, 7332495, 332495R91, 332495R91 (Item #: 204407, Ref: 332495R91) $162.01

No
Picture
Nut, Injection Pipe, Nozzle End - Replaces 250617R1, 74504409, 12627A, 367339R1, for tractor models 460, 606, 560, 660, 656, 706. (Item #: 162719, Ref: 250617R2) $6.80

Sediment Bowl Assembly - Used on Diesel Tractor Models 2606, 460, 560, 606 and 660, this replaces OEM part number 370074R91 (Item #: 184421, Ref: 370074R91) $127.00

Sediment Bowl Assembly - Fuel Strainer assembly with 2.25 inch bowl, 1/8 inch pipe thread to fuel line, 3/8 inch pipe to tank for gasoline tractors: H, HV, M, Super M and MTA, O4, OS4, W4, 460, 560, 600, 650, 656, 660, 706, 756, 766, 806, 826, 856. Replacement bowl available as part S.65504. Replaces OEM numbers 358245R91 and 370832R91. (Item #: 105393, Ref: S.61581) $22.00

Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet Includes a 5/16" line compression adapter fitting. For Cub, Cub Lo-Boy, A, B, Super A, AV AI, AV1, C, Super C, 100, 130, 140, 154, 184, 185, 184 Cub, Cub 185 Lo-Boy, 200, 230, 2400A, 2404, 2500A, 2504, 2606, 2656, 340, 404, 454, 460, 464, 504, 574, 606, 656, 674, 884. Fuel Strainer Assembly with 3/8 inch pipe connection to tank, 1/8 inch pipe outlet. Replaces Replaces: 354222R91, 355142R91, 369988R91, 38465D, 51066DC, 61782C91. (Item #: 105370, Ref: 61782C91) $16.00

No
Picture
Sediment Bowl Assembly - For International / Farmall tractor models M, MD, MDV, MV, 460, 560, 656, 660, 706, 766, 806, 826, 856, 2826, 2856, Replaces International OEM number 358245R91, 362040R91, 370832R91, 61782C91, Replaces OEM number 13194D, 70208205, 70237946, 70239167, 5/8" x 18 Pitch Male Thread, Short Bowl Type, Outside Diameter: 2 1/8", (Item #: 177024) $45.50

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: O12, O14, O4, O6, OS4, OS6, T340, T5, T6 (up to serial number 29964), W12, W14, W30, Super W4, W4, W40, Super W6, Super W6TA, W6, Super W9, W9, WR9S, F12, F14, F20, F30, 100, 130, 140, 200, 230, 300, 340, 350, 400, W400, 450, W450, 460, 560, 656, 660, 706, 756, 766, 806, 826, 856. Replaces 51344VA and 357957R1. (Item #: 105365, Ref: S.65504) $6.10

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D (Item #: 105364, Ref: 49923D) $3.50

Sediment Bowl Screen - For International / Farmall tractor models A, B, C, Cub Lo-Boy, Super A, Super C, 100, 130, 140, 240, 340, 454, 460, 464, 504, 574, 606, 656, 674, 686, 2400A, 2404, 2500A, 2504, 2606, 2656, Compatible with International Hay Cutting (s) 201, 210, 230, 275, 375, 4000, 5000, 5500, Replaces International OEM number 49923D, Diameter: 2", Diameter Hole: 1/4", For Sediment Bowl Assembly use Item #: 105370, (Item #: 105371) $3.00

No
Picture
Sleeve, Injection Pipe - Replaces 250610R1, for tractor models 460, 606, 560, 660, 656, 706. (Item #: 162718, Ref: 250610R2) $6.50

No
Picture
Throttle Friction Disc - This Throttle Friction Disc measures 0.165 of an inch thick, 1.960 inches outside diameter and has a center hole of 0.530 of an inch diameter. For models 240, 2400A, 2424, 2444, 2500A, 2504, 2544, 2656, 274, 284, 340, 3444, 404, 424, 444, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 664, 674, 684, 784, 884 and Hydro 84. Also replaces 388632R1, 394716R1 and 399168R1. (Item #: 178163, Ref: 369463R1) $7.40

Gauges

Fuel Gauge - For tractor models 766, 966, 1066, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, Hydro 100.The 12 Volt Negative Ground fuel gauge is calibrated properly for 460, 560, and 660 with a Stewart Warner sending unit, but this fuel gauge has a different appearance. Gauge must be grounded to work properly. You will need to run an extra ground wire from the threaded clamp terminal to an existing bolt to attain a proper ground. 32-244 Ohm. Use with 378427R91 sending Unit. Replaces 533992R1 H142794. (Item #: 121190, Ref: 533992R1) $40.60

Fuel Gauge - This aftermarket 12 volt negative ground fuel gauge replaces the factory Rochester gauge. It is calibrated for 0 - 70 OHMs. Used on; 340 Diesel with Factory Rochester gauge, (460, 560 Gas and Diesel with Factory Rochester gauge), 660 Gas and diesel with Factory Rochester gauge. Replaces: 369607R91 (Item #: 121572, Ref: 369607R91) $40.90

No
Picture
Fuel Gauge with Sending Unit - For International / Farmall tractor models Hydro 100, 460, 544, 560, 656, 660, 706, 756, 766, 806, 826, 856, 966, 1026, 1055, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4568, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 5378427R1, 533992R1, 378427R92, 378427R93, 378427R94, 378426R91, For replacement sending unit use Item #: 121190, (Item #: 135041) $77.00

Fuel Sending Unit - This sending unit is used on gas or diesel tractors: 2444, 444, 460, 560, 660. It is with Rochester Gauge and is calibrated for 0-70 ohms. Replaces: 1341373C1, 369608R91, 369608R92, 370376R92, 84203084, 84270826 (Item #: 151009, Ref: 369608R91) $57.00

Oil Gauge - 75 pound, IH logo in center. For tractor models 300, 350 Utility diesel, 400, 450 Farmall diesel, (460, 560, 660 with D236 engine). The rear of the gauge features a bracket and studs (1/8" NPT thread) for mounting on the dash. Includes the IH logo displayed on the faceplate. Calibrated for 45 PSI. Line adapter sold separately. This gauge is shipped with 1/8" male pipe threads. Unless you can reuse your old adapter fitting for the oil line to the gauge, you will need one of the following depending on the line size: 919095 (1/8" line) or IHS626 (1/4" line). (Item #: 111846, Ref: 362177R94) $35.20

Oil Pressure Gauge - For International / Farmall tractor models 350 (Diesel), 400 (Diesel), 450 (Diesel), 460 (Gas, LP, Diesel), 560 (Gas, LP, Diesel), 600 (Diesel), 650 (Diesel), 660 (Gas, LP, Diesel), Compatible with International Combine (s) 105, 453, 615, 715, Compatible with International Construction and industrial models 3616 (Gas and Diesel), 3800 (Gas and Diesel), 3850 (Gas and Diesel), Compatible with International Hay Cutting (s) 201, 210, 225, 230, 275, 375, Replaces International OEM number 362177R94, 393488R91, IH Logo on Face, Dash Mounted, 0-45 PSI, 1/8" male pipe threads, (Item #: 121661) $48.90

Tachometer - For tractor models: 460, 560, 660 Tachometer. Also replaces OEM 383092R91, 75679R91. (Item #: 102129, Ref: 383093R1) $68.00

No
Picture
Tachometer Cable - 63 inches total length. For tractor models 1086, 1468, 1486, 330, 340, 3688, 460, 560, 660, (886 with D360 engine), 986. Replaces 371245R91, IHS248. (Item #: 108040, Ref: 401830R92) $34.60

Tachometer Cable - For International / Farmall tractor models Cub (Lo-Boy), Hydro 100, 460, 606, 826, 966, 1026, 2504, 2606, Compatible with International Construction and industrial models 340, Replaces International OEM number 370197R91, 397016R92, Length: 43", Load End:, Drive End:, (Item #: 122468) $16.98

Tachometer Drive Gear Assembly - This Tachometer Drive Gear Assembly has 13 Teeth and is 1.765 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368245R12, 368245R11, 178575H1 (Item #: 164574, Ref: 368245R11) $64.58

Tachometer Drive Housing Fitting - This Tachometer Drive Housing Fitting is 3/4 inch - 20 pipe thread to 7/8 inch - 18 thread, 1.407 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368246R1, 178309H1 (Item #: 164575, Ref: 368246R1) $24.85

Hitch / Drawbar

3 Point Conversion Kit - For M, MTA, Super M, Super MTA, MD, 400, 450, 460, 504, and 560 also for 544 and 656 with spacer #861188. Two hydraulic cylinders included. (Order optional bracket #861190 to use swinging drawbar) Cat. I/II Weight is 260Lbs. Note: HK-11062 is similar to the picture shown but has two cylinder locations. (Item #: 111430, Ref: HK11062) $956.00

No
Picture
3 Point Hitch Conversion Kit - For International / Farmall tractor models M, 460, 560, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 171564) $692.00

Adjustable Lift Arm Kit - For International / Farmall tractor models 300, 330, 340, 350, 400, 460, 560, 606, 660, 2606, Left Hand, Can be used on Right Hand side if duckhead is flipped over, Consists of 523861R2 handle, 223316 duckhead, 523864R1 screw, 522819R1 housing, For duckhead pivot assembly use Item #: 173746, (Item #: 110460) $203.00

Crank Handle, Lift Arm Screw - 3 point or fast hitch. For tractor models 230, 330, 400, 450, 560, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, International Utility: 300, Farmall Rowcrop: 300, International Utility: 340, Farmall Rowcrop: 340, International Utility: 350, Farmall Rowcrop: 350, International Utility: 404, Farmall Rowcrop: 404, International Utility: 460, Farmall Rowcrop: 460, International Utility: 504, Farmall Rowcrop: 504, International Utility: 544, Farmall Rowcrop: 544, International Utility: 606, 656, Farmall Rowcrop: 656, Hydro 100, Hydro 70, Hydro 86. (Item #: 108883, Ref: 523861R2) $9.40

Drawbar - For International / Farmall tractor models 300, 330, 340, 350, 460, Replaces International OEM number 360632R1, Width: 2-1/4", Thickness: 1", Additional Handling and Oversize Fees Apply To This Item, (Item #: 125619) $221.58

Drawbar Brace Rod - For International / Farmall tractor models H (s/n 36680-later), M (s/n 21091-later), Super H, Super M, 300, 340, 350, 400, 450, 460, 544, 656, 664, 666, Replaces International OEM number 57233DA, Forged, 17-1/4" C.C. hole, (Item #: 126337) $65.00

Drawbar Pin Retainer Plate - Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Item #: 112643, Ref: 49139D) $7.50

No
Picture
Fasthitch to 3-point Cat 2 Quck Attach Prongs - For International / Farmall tractor models 300, 330, 340, 350, 450, 460, 560, 32" Bent arm style, Additional Handling and Oversize Fees Apply To This Item, (Item #: 109628) $318.00

No
Picture
Fasthitch to 3-point Prongs with Cat 1 Balls - For International / Farmall tractor models 300, 330, 340, 350, 450, 460, 560, Category 1 with Straight style arm with balls, (Item #: 109482) $146.00

Fasthitch to 3 Point Quick Attach Prongs - For International / Farmall tractor models 300, 300U, 330, 340, 350, 350U, 400, 450, 460, 504, 560, 660, 2504, Straight style arm, Category 2, Additional Handling and Oversize Fees Apply To This Item, (Item #: 111429) $172.00

Latch Spring, Lower - For use with latch 393500R1. For tractor models HYDRO 100, HYDRO 70, HYDRO 86, 1026, 1066, 1206, 130, 140, 1466, 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 504. 3.57 inches long. Replaces 522840R1. (Item #: 128306, Ref: 522840R2) $9.20

Latch Spring, Upper - For use with latch 393500R1. For tractor models HYDRO 100, HYDRO 70, HYDRO 86, 1026, 1066, 1206, 130, 140, 1466, 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 504. 4.36 inches long. (Item #: 128305, Ref: 522839R1) $18.90

Leveling Screw Housing - Right or left hand. 11.50 inches long. For tractor models 2504, 2606, 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660. (Item #: 109939, Ref: 522819R1) $79.00

$Farmall 460 Leveling Screw, RH\LH$
Leveling Screw, RH/LH - .875 inch diameter, 15.750 inches long. For tractor models 2504, 2606, 300, 330, 340, 400, 450, 460, 504, 560, 606, 660. (Item #: 110684, Ref: 523864R11) $68.00

No
Picture
Pivot Assembly, 7/8" - For International / Farmall tractor models 300, 330, 340, 350, 400, 460, 560, 606, 660, Replaces International OEM number 383990R2, Fits 7/8" screw, For complete assembly use Item #: 110460, (Item #: 173746) $72.00

Swinging Drawbar Pin - For tractor models H, Super H, M, Super M, 300, 330, 340, 350, 400, 450, 460, 560, 660. (Item #: 109900, Ref: FOH450) $54.00

Three Point Hitch - This 3-point hitch kit fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar. Kit includes (Cat # 1 on tractor end and Cat # 2 on equipment end, and 2 hydraulic 2 way cylinders, but does not include hoses. Please note, this hitch exceeds size limitations for UPS. This hitch kit must ship via LTL freight truck. (Item #: 1000051, Ref: IHS3009) $1799.99

Top Link Bracket for 3-Point Conversion Kit - For International / Farmall tractor models 350, 460, 560, For Exposed Shaft, (Item #: 111432) $75.00

Hydraulic System

No
Picture
Gasket and O-Ring Kit - For International / Farmall tractor models 340, 460, 560, 660, Replaces International OEM number 370893R2, 352221R1, 252738R1, 369908R1, 364839R1, 52999D, Kit includes: 370893R2 Gasket, 352221R1 O-Ring, 252738R1 O-Ring, 369908R1 O-Ring, (2) 364839R1 O-Rings, (4) 52999D Shims, (Item #: 176765) $51.00

No
Picture
Hitch Hydraulic - PUMP - 12 GPM For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826. To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters. (Item #: 104233, Ref: R2965) $330.00

Hydraulic Filter - Hydraulic oil filter, for gear drive tractors with pumps up to 12 gpm. Not for hi-capacity power supply. For tractors: 340, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. (Item #: 111116, Ref: 388084R93) $36.90

Hydraulic Pump - Hydraulic Pump, 12 GPM Main Hitch Pump. Note: Pump pressure is rated at 2250 PSI, exceeding pressure may damage pump and void the warranty. Open back type, can be used with piggy-back pump. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Replaces 1949296C1, 70933C91, 373964R93. To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters. (Item #: 104233, Ref: 70933C91) $330.00

Hydraulic Pump - Pump is open back type to use with piggy-back pump, 17 GPM rating, max PSI of 2250. Not for use in 12 GPM systems. If system is 12 GPM, use 1949296C1. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Hydraulic Pump is 17 GPM. (Item #: 104237, Ref: 70935C91) $390.00

Hydraulic Pump Backplate Gasket - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 330, 340, 450, 460, 504, 544, 560, 606, 656, 660, 706, 786, 806, 826, 856, 886, 986, 1026, 1066, 1086, 1206, 1466, 1468, 1486, 1566, 1568, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21256, 21456, Replaces International OEM number 71265C1, 371543R1, 371543R2, For Pumps 70631C91, 70932C91, 70933C91, 70935C91, (Item #: 111636) $4.40

Hydraulic Pump Back Plate with Gasket - For International / Farmall tractor models Hydro 100, Hydro 186, 330, 340, 460, 504, 544, 560, 606, 656, 660, 756, 766, 786, 806, 826, 856, 886, 1026, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Compatible with International Construction and industrial models 2504, 21206, 21256, 21456, Replaces International OEM number 371524R1, 71265C1, (Item #: 122682) $18.90

Hydraulic Pump, Hitch - PUMP - 17 GPM For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826 (Item #: 104237, Ref: R2966) $390.00

Hydraulic Pump, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 330, 340, 460, 504, 544, 560 (application), 606, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, 1026, 1456, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3488, 21026, 21456, Replaces International OEM number 70935C91, 373966R94, 1949292C1, 527755R91, For 560 application, pump must be open on back side to accomodate piggyback pump., 17 GPM, For a new version of this item use Item #: 104237, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404237) $206.01

Lights

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $10.10

Light Ring - The dimensions of this light ring with screw are 4.5 inches and 0.885 inches in width. For the following: Cub Lo-Boy serial number 10001 and up - (WILL NOT FIT 154, 184, 185) Cub serial number 210001 and up, ( 460, 560, 660 tail light only) Replaces 10P1552, 230233, 371445R91, 371449R91, 371451R91, 70230233, AF3891R, B50255, B50258, JDS676 (Item #: 154743, Ref: 371449R91) $23.40

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $14.70

Sealed Beam Bulb, 6 Inch - The Sealed Beam Bulb is 6 Volt, 5.625 inches in diameter and has two contacts. It replaces original part number 371457R91. (Item #: 111244, Ref: 1002802M91) $19.30

Miscellaneous

Hydraulic Supply Line, Remanufactured, 370884R91 - For International / Farmall tractor model 460, Replaces International OEM number 370884R91, (Item #: 210197) $291.01

O-Ring, Hydraulic Power Steering - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 460, 544, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Compatible with International Harvester (s) 616, 622, Replaces International OEM number 254688R1, 14472780, (Item #: 153567) $0.90

Pawl Operating Knob - For International / Farmall tractor models 300, 300U, 330, 340, 350, 350U, 400, 450, 460, 560, 660, Replaces International OEM number 359108R1, (Item #: 126598) $6.00

Torque Amplifier Carrier, Remanufactured, 361281R13 - For International / Farmall tractor models Super MTA, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, For a New version of this sku use Item #: 151955, (Item #: 204411) $166.91

Torque Amplifier Handle Spring - For International / Farmall tractor models Super MTA, Super W6, W400, W450, 330, 340, 400, 450, 460, 504, 606, 660, 2504, 2606, Replaces International OEM number 359920R2, 359920R1, (Item #: 121574) $11.40

Oil System

Oil Filter - Oil filter element, cartridge type with gasket. For gas engines: C221, C263, C291, C301. For diesel engines: D166, D188, D236, D282, D and DT 361, D and DT407. For 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 330, 340, 460, 504, 560, 606, 656, 660, 706, 756, 806, 815, 826, 856, 915. Also replaces 279994R91. (Item #: 111127, Ref: 323827R91) $13.40

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Washer available as part number EBU6734A, not included. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.60

Oil Pump - For International / Farmall tractor models 460, 504, 560, 606, 660, 706, 2504, 2606, 2706, Compatible with International Combine (s) 303, Compatible with International Harvester (s) 414, 420, Compatible with International Engine (s) C221 (LP and Gas), C263 (LP and Gas), C301 (LP and Gas), D188, D236, D282, D301, Replaces International OEM number 230421R91, 211388R91, 332435R91, 69605R91, 69604R91, (Item #: 128632) $274.27

Oil Pump Assembly - This complete oil pump assembly comes as picture and is for tractor models 606, 2606, 560 engine serial number 32243 and up, 656, 660 engine serial number 32243 and up, 706, 2656, 2706, Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756, 806, 826, 856, 2806, 2826, 2856, 3309, 340, 560 engine serial number 42218 and up, 660 engine serial number 42218 and up, 706 engine serial number 51721 and below, 2706 engine serial number 51721 and below. FOR THE FOLLOWING ENGINES ONLY: C221, C263, C282, C291, C301, UB220, UB240 gas and LP engines and BD220, BD240, D166, D188, D236, D282, D301 diesel engines. Does not include pick-up screen. Replaces 230421R91, 308366R91, 379138R1, 379138R91. (Item #: 121773, Ref: 379138R91) $416.05

Spin-On Oil Filter Adapter Kit - This Spin-On Oil Filter Adapter Kit Fits Gas, LP Combines: 101, 127, 141, 151, 181, 205, 303, 315, 403, 453, 503, 615, 715. Fits Gas and LP Tractors: 460, 560, 606, 656, 660, 706, 756, 806, 826, 856; Replaces: Quad ring: 304854R1, Adapter: 397866R1, Stud: 397867R1, Kit: 538837R91, Threaded bushing: 538969R1 (Item #: 167272, Ref: 397866R1KIT) $123.00

PTO / Driveline

No
Picture
Independent PTO Shaft - For tractor models 300, 330 band type, 340 band type, 350, 460 band type. PTO Shaft has 16 spline, 25 teeth, 1 11/16 inch diameter. (2977R) (Item #: 140635, Ref: 362619R1) $214.00

Independent PTO Shaft - For tractor models 330, 340, 460, all clutch type. PTO Shaft is 16 spline, 24 teeth, 1 11/16 inch diameter. (Item #: 172735, Ref: 373666R1) $268.00

No
Picture
IPTO Drive Gear Shaft, Used - For International tractor models 300, 330, 340, 350, 460, Replaces International OEM number 362619R1, Diameter: 1.689", Splines: 16, Teeth: 25, For a new version of this item use Item #: 140635, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435960) $127.01

PTO Bearing - This bearing measures 1.575 inches (40.005 mm) inside diameter, 3.150 inches (80.010 mm) outside diameter, and 0.709 inches (18.008 mm) wide. It replaces D83012, B18215, DANA070HD100, H437897, H4628S, H4625S, H4626S, H4627S, K3660223431, L33908, SBA326040030, P39642, ST215, 0000140211, 0040040, 1103566C91, 114085, 130029H1, 151901206, 190001311024, 190003311024, 190003313025, 192310210025, 1963034C1, 199012290707, 20915780, 2359180, 2521A415, 294714R91, 301164, 3146251R91, 325046C91, 339818X1, 340401140, 41618500, 47109308, 47110555, 47123219, S69425, 6208, 700524R91, 700526R91, 70066742, 700803429, 704772R91, 704772R92, 707805203, 713564R91, 80114085, 80301164, 81878507, 83962320, 87605894, 920096050, 9964942 (Item #: 111675, Ref: ST215) $32.98

PTO Brake Band with Lining - This brake band is 1.495 inches wide and the lining is 0.120 inches thick. It is used on the following tractors with planetary PTOs: Super M, Super MTA, 300, 330, 340, 350, 400, 450, 460, 560, 660. Replaces: 359059R91, 365763R91, 373304R91, 373304R92. Two are used per tractor, sold individually. (Item #: 127409, Ref: 359059R91) $264.00

PTO Clutch Disc, Inner - This disc has 34 splines and a 3.590 inch spline diameter. It replaces 374033R1, 02003660. (Item #: 168580, Ref: 374033R1) $12.50

PTO Coupler, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, Super M, Super MTA, 300, 300U, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2504, 2544, 2606, 2656, 3388 (s/n 10384-earlier), Replaces International OEM nos 360168R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430248) $49.51

No
Picture
PTO Gear, Used - For International tractor models 330, 340 (Gas and Diesel), 460 (Gas and Diesel), Replaces International OEM nos 373667R1, Teeth: 79, Splines: 13, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 440475) $332.01

PTO Seal - For tractor models with Live PTO: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, W400, W450. 1.375 inch inside diameter, 2.378 inch outside diameter, 0.312 inch wide Replaces 360436R91, 364472R91, 364477R91. (Item #: 116834, Ref: 359051R91) $11.30

No
Picture
PTO Shaft - 16 spline, 24 teeth 1 11/16 inch diameter. For 330, 340, 460. All clutch type. (Item #: 172735, Ref: R2976) $268.00

No
Picture
PTO Shaft Seal Kit - This PTO Shaft Seal Kit includes bearings, seals and O-rings. For tractor models: 2606, 2656, 460, 544, 606, 656, 664, 666, 686. All with Torque Amplifier. (Item #: 180732, Ref: R2990) $79.00

PTO Shield - For tractor models 2504, 2606, 330, 340, 460, 504, 560, 606, 660. All with clutch type independent PTO. (Item #: 111724, Ref: 364712R21) $61.00

PTO Shield - For 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660 ALL with Independent PTO. PTO Shield (Item #: 103974, Ref: 360181R91) $72.00

Seats

Backrest - Backrest cushion, white with black trim. Same application as 64B. For 460, 560, 660. (Item #: 101261, Ref: 65BR) $48.60

$Farmall 460 Backrest, White\Black$
Backrest, White/Black - Plastic base, fiberglass back support, back 19 inches long, 5 3/4 inches tall, 14-3/8 inch center to center on mounting bolts. For tractor models (2404, 2606, 240, 404, 460 without vertical action), 2504, 300, 330, 340, 504. (Item #: 173866, Ref: 380684R93-5) $54.00

Pan Seat 4-Bolt Mount - Pan Seat with silver padded canvas. Center brass drain hole over metal pan seat frame. For: C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 3 50, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Item #: 110069, Ref: R0906) $212.00

Pan Seat 4-Bolt Mount - Pan Seat with a red and white vinyl cover measures 22 inches wide and 19 inches long. For C, Super C, Super H, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Item #: 101244, Ref: 357518R91) $160.00

Pan Seat 4-Bolt Mount - Black vinyl padded cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Item #: 101245, Ref: R0903) $213.00

Pan Seat Flip over with lock Rod - RED AND WHITE Vinyl Pan Seat, flip over seat with lock rod. Like Original Seat, complete with lock. A, AV, B, BN, Super A, Super AV, 100, 130, 140 (Early), [ International Utility: 300, 350 (with LOW-STYLE SEAT) ], Utility: 460 (with LOW-STYLE SEAT); Replaces: 354157R92, 50570DC (Item #: 101250, Ref: 50570DC) $221.00

Rubber Torsion Seat Spring Set - Items are sold as a pair. For the following tractors with deluxe vertical acting seats: Farmall 460 (up to serial number 16930), 560 (up to serial number 3105), Farmall 560 (up to serial number 26959), 660 (up to serial number 3407). Replaces 372736R1 (LH) and 372737R1 (RH). (Item #: IHS3729) $179.99

Seat Adjustment Handle - For the following models: Hydro 100, 460, 504, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186. Replaces 372738R91, 372739R91, 373656R91, and 380725R91. (Item #: 105324, Ref: 1016119M91) $28.00

Seat Back - Seat back ONLY (seat bottom part number R1136 must be ordered separately). For 240, 300, 350, 400, 450 with Deluxe Seat, 460, 560, 660. (Item #: 182180, Ref: R1137) $197.00

Seat Back - Black and white vinyl on steel 11 1/2 inches between mounting holes. For tractor models 460, 560, 660. (Item #: 178437, Ref: R0979) $169.00

Seat Back - With original style Pleated Covering black and white vinyl on steel 13 1/2 inches between mounting holes. For 460, 560, 660. (Item #: 179274, Ref: R3659) $232.00

Seat Bottom - Seat bottom ONLY with metal pan, (backrest part number R1137 must be ordered separately). Black vinyl on steel. For 240, 300, 350, 400, 450 with standard seat, 460, 560, 660. (Item #: 182183, Ref: R1136) $203.00

No
Picture
Seat Bottom - Black and white vinyl on steel 10 1/2 inches between mounting flanges. For 460, 560, 660. (Item #: 178306, Ref: R0978) $332.00

No
Picture
Seat Bottom - Black and white vinyl on wood 10 1/2 inches between mounting flanges. For 460, 560, 660. (Item #: 178316, Ref: R0989) $137.00

Seat Bottom - With original style pleated covering black and white vinyl on steel 10 1/2 inches between mounting flanges. For 460, 560, 660. (Item #: 185324, Ref: R3658) $314.00

Seat Cushion - Seat cushion, fits deluxe seat on IH tractors: 460, 560, 660. For 460, 560, 660 (Item #: 101256, Ref: 64B) $119.00

Seat Cushion, Back, Black - 6 InchES, BLACK VINYL. Fits Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 220, 100, 130, 140, 203, 300, 303, 315, 330 UTILITY, 350, 403, 460, 503 2429>, A, ALL COTTON PICKERS, B, Super A, 212 IND/CONST. 16.5 inch bolt spacing. (Item #: 116170, Ref: 363219R91-1) $35.80

Seat Cushion, Base, Black - Wood Base, Black Vinyl. Fits Cub, Cub 154 Lo-Boy, 220, 100, 130, 140, 203, 300, 303, 315, 330 UTIILITY, 350, 403, 460, 503 2429>, A, ALL COTTON PICKERS, B, Super A, 212 IND/CONST. (Item #: 173037, Ref: 363220R91-1) $34.90

No
Picture
Seat Custom with Fold Up Arms - Black vinyl assy. with fold up arm rests fits, 1030, 1031, 1032, 1070, 1175, 1190, 1200TK, 1290, 1390, 1470TK, 200, 230, 240, 2504, 300, 330, 340, 350, 400, 404, 450, 460, 480B, 503, 504, 560, 580B, 600, 606, 650, 660, 730, 740, 830, 840, 870, 930, 940. MUST USE ADAPTER FOR FOLLOWING MODELS, A, B, C, H, HV, M, MDV, MD, MV, Super H, Super A, Super M, W9, WD9, WDR9, WR9S. (USE ADAPTER # CSA300). (Item #: 101387, Ref: CS108-1V) $116.00

Seat Hinge Pin - Pin, hinge for tilt back seat bracket. Pin is 7 inches long and 3/8 inch diameter. Tractors: C, Super C, H and HV, Super H and HV~ M and MD, Super M and MTA~ Super W6 and W6TA~ 200, 230, 300, 340, 350, 400, 450, 560, 660. For 200, 230, 300, 340, 350, 400, 450, 460, 560, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super HV, Super M, Super MD, Super W6, W6TA. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. Replaces: Washer: 228280, Pin: 356892R2, Clip: 356893R2 (Item #: 179249, Ref: 356892R2) $12.00

Seat Pan - Steel Black vinyl without drain hole Fits tractor models, 100, 140, 200, 230, 240, 300, 340, 350, 460 DSL, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTD, MV, Super H, Super M, W9, WD9, WDR9, WR9S (Item #: 191059, Ref: 357518R92-1) $205.00

No
Picture
Seat Pan - Steel Silver vinyl Fits Models, 100, 140, 200, 230, 240, 300, 340, 350, 460 DSL, 600, 650, A, AV, B, C, H, HV, M, MD, MDV, MTD, MV, Super H, Super M, W9, WD9, WDR9, WR9S. (Item #: 101246, Ref: 357518R92-18) $148.00

Seat Pivot Support Rod - This Seat Pivot Support Rod is 3 1/2 inches in length. Includes machine washers, rubber bushings, bolts and lock washers. (Item #: 105343, Ref: 355753R1) $19.90

Seat, Shock Absorber - For tractor models 460, 504, 544, 560, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, 2504, 2544, 2706, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 414 Cotton Picker, 420 Cotton Picker. Replaces 372751R91, IHS646. (Item #: 105342, Ref: 400072) $53.58

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Seat Shock, Mid Mount - For tractor models: C, Super C, Super H, and Super H. All serial number 19234 and up; M, MD, MDV, Super MDV, Super MD, 200, 230, 300, 350, 400, 450, 460, 560. Shock absorber for mid mounted shock is 7 1/4 inches from center-to-center compressed length. Replaces IHS347, 361033R91. (Item #: 105340, Ref: 351750R93) $39.00

Seat Spring - Cone Shape SPRING Measures 13 inches tall and 8.5 inches at base. For tractor models 200, 230, 300, 350, 400, 450, 460, 560, 600, 650, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super M, Super MTA. Replaces IHS030. (Item #: 101283, Ref: 354670R2) $26.90

Spring Seat, Rubber - For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1566, 460, 504, 544, 560, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1468, 1568, 4100, 4156, 4166, 4186, 656, 660, Hydro 100, Hydro 70, Hydro 86. Some of these models have a different seat (earlier version) that the left and right springs are different pin configurations and the center shaft has a collar that sticks up above the rubber..... These are not available. (Item #: 101285, Ref: 380712R1) $33.20

Sheet Metal / Body Parts

Front Hang-On Weight Bracket - This is a 10 hole bracket. There is 16 inch from center-to-center bolt holes. The overall length is 23-3/8 inch. For utility applications, must have existing 66253C1 cast bumper weight to bolt this to. Hydro 70, Hydro 84, Hydro 86, 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2424, 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 385, 404, 424, 444, 460, 504, 544, 560, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, Following 2 wheel drive only: 784, 884, Following when equipped with 66253C1 cast bumper weight: 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500, 2500A, 2500B, 2505B, 2510B, 2514B, 454, 464, 484, 574, 584, 674, 684, will also fit the following models when using (2) 536041R1 spacers: 1066, 1466, 1468, 1566, 1568, 766, 966, Hydro 100. Replaces: 383389R11, 383389R21 (Item #: 152230, Ref: 383389R11) $215.00

No
Picture
Grille Screen - For International / Farmall tractor models A, B, C, Cub (s/n 222500-earlier with round hood / grille), Cub Lo-Boy (s/n 17200-earlier with round hood / grille), H, HV, I4, I6, I9, M, MD, MTA, O4, O6, O9, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MTA, W4, W6, W9, 100, 130, 140 (s/n 23300-earlier), 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 560, 600, 650, 660, Size: 2' x 3' with 5 squares per inch, Wire Grille Screen Clips use Item #: 108001, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112471) $17.98

Knurled Hood Fastener - For International / Farmall tractor models 460, 560, 660, Replaces International OEM number 372689R1, 374240R1, Thread: 1/4"-20NC, Length: 1.315", (Item #: 110982) $12.20

RH Rear Hood Panel, Used - For International tractor models 460, 560, 660, Replaces International OEM nos 369186R1, For Tractors with out Hydra-Touch System, Right Hand Side, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498022) $216.01

Steering

Axle - Heavy duty main axle assembly includes bushings. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. Additonal $45 shipping due to weight. (Item #: 120010, Ref: 7453) $966.00

Axle Center Tube - For all models listed with factory IH wide front with tie rods behind center tube: H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, 1026, 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 666, 706, 756, 806, 826, 856 Axle Center Tube with bushings (48841D) is 42 1/2 inches long and 4 1/2 inches in diameter. Replaces: 358976R31, 383926R21, Bushing: 48841D (Item #: 109489, Ref: 358976R31) $450.00

Axle Clamp, Front, Used - For International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, MTA, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM nos 350556R1, Front Axle Clamp, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434540) $31.01

No
Picture
Axle Extension Tube - Standard duty, 11-5/8". For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108809, Ref: 3036) $206.98

No
Picture
Axle Extension Tube - schwartz part (Item #: 110830, Ref: 3037) $198.98

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 11-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 111582, Ref: 7465) $343.00

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 9-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 172645, Ref: 7470) $406.00

Axle Pivot Pin Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a WIDE FRONT axle pivot pin bushing for factory adjustable wide front axle and tie rods behind the axle: 1026, 1256, 400, 450, 660, 666, 300, 350, 460, 544, 560, 656, 706, 756, 806, 826, 856, H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, Super MDTA, Super MTA, W400, W450. Replaces 48841D (Item #: 109669, Ref: 48841D) $13.50

Bolster Pivot Pin - 1 1/4 inch diameter, 8 1/2 inches long. If you need a 1 1/2 inch Diameter Pin, order 379941R1. For tractor models H, Hydro 70, M, MD, MTA, Super H, Super M, 1206, 1256, 400, 450, 460, 544, 560, 656, 666, 686, 706, 756, 806, 826, 856. Replaces 358978R1, 358978R2 (Item #: 109487, Ref: 358978R2) $27.70

Drag Link End - Rear for IH Models 300, 330, 340, 350, 460 all Utility models. Measures 4.25 inches from center of knuckle to end of threads, 11/16 inch-18 UN right hand threads. (Item #: 100670, Ref: 363161R92) $12.70

Front Axle Clamp Pin - For International / Farmall tractor models H, HV, Hydro 70, Hydro 100, Hydro 186, M, MD, Super H, Super M, 300, 350, 400 (FARMALL), 450, 460, 544, 560, 656, 660, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, Compatible with International Construction and industrial models 21206, 21256, Replaces Case IH OEM number 350557R1, 0.739" Dia., 6.616" Long, 1.125" Head, For applications with steel center axle tube, but depending on the model it can be used on standard and high center front axle., With adjustable wide front axle, (Item #: 158235) $12.10

Front Drag Link End - A=3.875, B=.687, 18 left hand thread. For tractor models 300, 330, 340, 350 Utility, 460. Replaces 365852R91. (Item #: 100671, Ref: 363160R91) $11.30

No
Picture
Front Saddle Assembly - Fits Schwartz front end ONLY. For tractor models 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, H, M, MTA, Super H, Super M. (Item #: 172611, Ref: 7443) $332.00

Jam Nut - For the following tractors: Hydro 100, Hydro 185, Hydro 70, 1026, 1066, 1086, 1206, 1256, 1466, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 460, 544, 560, 660, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 2WD STD AXLE: 5088, 5288, 5488. Replaces 374062R1 (Item #: 105244, Ref: 192928M1) $9.00

Knee Extension - With bushings 3 7/8 inch diameter. For 460, 544, 560, 660, 666, 686, 706, 806, 1206, 1256, Hydro 70. 370689R21 (Item #: 110386, Ref: R2953) $231.00

Oil Seal - Oil seal for bearing kit FW113FS. External Lip, Spring Loaded, Closed Case Seal, 2.786 in od, 1.75 in id, and .294 in wide. For Tractors H, Super H, M and MD, 4, Super W4, 300, 350. For 2606, 300, 350, 4, 460, 504, 606, H, M, MD, Super H, Super M, Super MD, Super W4. Check measurements. (Item #: 110745, Ref: 48539DA) $11.00

Piston Rack - Manual - For International / Farmall tractor models 330, 340, 460, Replaces International OEM number 373001R91, For power steering use Item #: 111913, (Item #: 111912) $421.98

Pivot Bolster - For tractor models 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 1026, 1206, 1256, Hydro 70. Pivot Bolster. (0011R) (Item #: 109484, Ref: 383909R4) $318.54

Pivot Bolster Pin - 1 1/2 inch diameter, 8 1/2 inches long. For 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 1026, 1206, 1256, Hydro 70. Pivot Bolster Pin. (2961R) (Item #: 173188, Ref: 379941R1) $64.00

No
Picture
Pivot Pin 4-3/16 - For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 110958, Ref: 1394) $36.20

No
Picture
Pivot Pin, 6-11/16 - For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super M, Super H. (Item #: 110959, Ref: 1393) $10.98

Pivot Pin Jam Nut - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, (Item #: 108889) $9.90

Pivot Pin Retaining Pin - For International / Farmall tractor models Hydro 70, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, Replaces International OEM number 251105R1, Dimensions: 3/8" x 4 7/8", (Item #: 170357) $4.30

Power Steering Pump - For tractor models 330, 340, 460, 560, 660. (Item #: 100018, Ref: 371135R92) $390.00

Rear Support Bushing - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, 1850, Replaces OEM number 60305, (Item #: 110729) $6.60

Replacement Plug - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, Replaces International OEM number 1389, (Item #: 108806) $7.10

Schwartz Heavy Duty Wide Front End with Hubs - For International / Farmall tractor models 460, 544, 656, Converts narrow front to wide front, Heavy Duty, Not recommended for use with flotation tires, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 120000) $3049.01

Spindle - For International / Farmall tractor models 460, 544, 656 (With Schwartz Front Ends), Replaces International OEM number 3273, Vertical length 11-3/8", Shaft dia. 1-5/8", Spline dia. 1-5/8", Inner brg. dia. 1.375", Outer brg. dia. .843", Seal dia. 1.746", Not recommended for use with flotation tires, (Item #: 109362) $167.00

No
Picture
Spindle - For International / Farmall tractor models 460, 544, 560, 656, 706, 806, 856, Vertical Length: 11-3/8", Shaft Diameter: 1-3/4", Spline Diameter: 1-5/8", Seal Diameter: 2", Outer Bearing Diameter: 1.374", Inner Bearing Diameter: 1.795", Used In Kit No. 119999, 120000, 120001, Additional Handling and Oversize Fees Apply To This Item, (Item #: 120007) $158.98

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.80

No
Picture
Spindle Bushing - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 3010, 3020, 4000, 4010, 4020, Replaces OEM number 7469, 1139-61539, A24K, B1A24K, For Heavy Duty Wide Front Ends, Length: 1.502", OD: 2.002", ID: 1.755", (Item #: 108895) $13.80

Spindle, LH - This spindle measures A= 12.375 inch, B= 1.667 inch, C= 1.375 inch, D= .842 inch. For tractor models 460, 544, 656. The wheel bearing kit used for this spindle is part number WBKIH2. (Item #: 100836, Ref: 383910R91) $205.00

Spindle, RH - This spindle measures A= 12.375 inch, B= 1.667 inch, C= 1.375 inch, D= .842 inch. For tractor models 460, 544, 656. The wheel bearing kit used for this spindle is part number WBKIH2. (Item #: 100835, Ref: 383911R91) $201.00

$Farmall 460 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 12.750 inch, B= 1.667 inch, C= 1.375 inch, D= .842 inch. For tractor models 460, 544, 656. The wheel bearing kit used for this spindle is part number WBKIH2. (Item #: 100837, Ref: 405427R92) $186.00

Spindle, Used - For International tractor models 460, 544, 656, Replaces International OEM number 383910R91, Left Side, Dimension A: 12.375", Dimension B: 1.667", Dimension C: 1.375", Dimension D: .842", For a new version of this item use Item #: 100836, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400836) $115.01

Stay Rod Assembly - Stay Rod Assembly "Wishbone" fits wide front end tractors. For tractor models 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, H, Hydro 70, M, Super H, Super M, Super MD. Replaces 10546D, 360405R11 VERIFY PART NUMBER IN PARTS MANUAL FOR YOUR TRACTOR. (Item #: 167990, Ref: 360405R11) $500.00

Stay Rod Assembly, Used - For International tractor models H, HV, M, MD, Super H (s/n 19234-later), Super M (s/n 60001-later), 300, 350, 400, 450, 460, 544, 560, 656, 660, 706, 756, 806, 826, 856, 1026, 1206, 1256, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 360405R11, Wishbone, Adjustable Wide Front Axle, For a new version of this item use Item #: 167990, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429882) $325.01

No
Picture
Steering Arm, LH - Left hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 109364, Ref: 2130) $92.00

No
Picture
Steering Arm, RH - Right Hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108808, Ref: 2129) $89.00

No
Picture
Steering Box Bar - For International / Farmall tractor models 330, 340, 460, Replaces International OEM number 378144R1, Adjusting Pad, 3-3/4" Long, (Item #: 112007) $59.00

No
Picture
Steering Box Bar - For International / Farmall tractor models 330, 340, 460, Replaces International OEM number 372995R1, Adjusting Pad, 2-3/8" Long, (Item #: 112008) $59.00

Steering Bracket Assembly - For International / Farmall tractor models H, M, MTA, Super H, Super M, 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, Replaces International OEM number 3049, (Item #: 110829) $106.00

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.60

Steering Wheel - For Late 140, 240, Farmall 300 (not utility), 340, 350, 400, 404, 424, 444, 450, 460, 560, 4100, 4166, 4186. Steering Wheel 18 inch diameter, 7/8 inch 36 splined hub. Replaces OEM part number 366557R1, 366557R2, 366557R91. (Item #: 101431, Ref: R3217) $42.10

Steering Wheel - With 7/8 inch splined hub. For tractor models 140, 350, 404, 424 without power steering, 444 without power steering, 450, W450, 460, 504, 560, 2404, 2424 without power steering, 2444 without power steering, 4100, 4156, 4166, 4186, Combines: 105, 203, 205 to serial number 1289. Steering wheel 17 3/8 inch diameter, 7/8 inch hub, for splined shaft. Does not come with center cap. (Item #: 101431, Ref: 366557R2) $42.10

Steering Wheel Cap - For Models with Power Steering. Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101433, Ref: 366566R1) $63.00

Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101434, Ref: 366558R1) $70.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Thrust Bearing, Axle - Standard duty. Fits Schwartz/Speeco type front ends. For tractor models 300, 350, (354, 364 last serial number models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last serial number models), H, M, MTA, Super H, Super M. Replaces OEM number 392671M91. Also replaces SCHWARTZ part number 60351. (Item #: 107048, Ref: T163) $21.70

Tie Rod - Long notched With seal and stud nut for Swartz front end. 18 inches long from center of ball joint to end of shaft. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H. (Item #: 111711, Ref: 22513) $37.40

Tie Rod Assembly - Complete assembly contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. Fits HYDRO 100, HYDRO 186, HYDRO 70, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1568, 1586, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986. Fits Factory International wide front axles only. Will not fit Schwartz, Speeco, Norden or other aftermarket wide front axles. (Item #: 100869, Ref: 223313) $85.00

Tie Rod Clamp - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 359986R1, (Item #: 104414) $3.20

Tie Rod, DU Axle - Used on Schwartz front ends, this is a sealed (New Style) Tie Rod. It measures 18.750 inches from center of ball joint to end of rod. The rod has a 1 inch diameter. (Item #: 108804, Ref: 22813) $61.00

No
Picture
Tie Rod, Inner - Inner tie rod with jam nut, seal and stud nut. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 103164, Ref: 22512) $35.40

Tie Rod Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 374062R1, 1.000" - 16 RH thread, (Item #: 104411) $8.20

Tie Rod Tube - Tube only. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108807, Ref: 1606) $24.98

Tie Rod Tube - For International / Farmall tractor models Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, Replaces OEM number 22514, (Item #: 110782) $52.00

Tie Rod Tube Kit - For a Swartz front end. Kit includes, 1 tie rod tube, 1 plug, 1 ball stud, 2 1/8 inch cotter pins, 1 dust seal. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 112262, Ref: 22812) $71.00

Wheels

Bearing Cone - Bearing cone. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2504, 2544, 2606, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088. (Item #: 111288, Ref: 619386R91) $10.50

Clamp Lock Nut - Wheel Clamp Lock Nut. 7/8-14 thread. Fits front wheel on tractors: H, Super H~ M, Super M~ B275, 300, 350, 400, 450, 460, 560. For 300, 350, 400, 450, 460, 560, B275, H, M, Super H, Super M (Item #: 109854, Ref: LN10-5) $18.80

No
Picture
Complete Front Hub Assembly - For International / Farmall tractor models 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces OEM number 119999, 120000, 120001, 120002, 119998, Additional Handling and Oversize Fees Apply To This Item, (Item #: 120006) $169.00

No
Picture
Front Wheel Bearing - Bearing kit, for front wheel, contains inner cone, inner cup, outer cone, outer cup, oil seal. For tractor models 460 except hi-clear, International 504, 606 and 2606 standard front axle. (Item #: 182668, Ref: FW119FS) $64.00

Front Wheel Bearing - Bearing kit for front wheel, contains inner cone, inner cup, outer cone, outer cup, oil seal. For tractors: 1026, 1066, 1086, 1206, 1246, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 2504, 2606 HD Front Axle, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 5488, 544, 5488, 460 hi clear, 560, 606, 656, 666, 685, 686, 706, 756, 754, 766, 786, 806, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86 (Item #: 100856, Ref: FW120FS) $34.20

Front Wheel Bearing Kit - Bearing kit, for front wheel, Contains Bearing LM603049-BP 1.781 inches ID, Bearing Cup LM603011-BP 3.062 inches OD, Bearing LM48548-BP 1.375 inches ID, Bearing Cup LM48510-BP 2.562 inches OD, Wear Sleeve 48703D-BP Hub Cap Gasket 369860R1 Lip Type Seal 22322-BP 2.250 inches ID, 3.250 inches OD. For tractor models 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 100856, Ref: 371418R91) $34.20

Front Wheel Hub, 6 Bolt - For tractor models 460, 504, 544, 656, 666, 686, Hydro 70, Hydro 86. Hub uses #WBKIH2 wheel bearing kit. (Item #: 104505, Ref: 395310R11) $169.00

Front Wheel Hub, 6 Bolt, Used - For International tractor models 404, 424, 444, 460, 504, 544, 606, 656, 2404, 2424, 2444, 2504, 2544, 2606, 2656, Replaces International OEM nos 369141R11, 397092R11, Bolts: 6, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432420) $176.01

Rear Cast Wheel Clamp, Used - For International tractor models 300, 350, 400, 450, 460, 504, 560, 656, 2504, 2544, 2656, Replaces International OEM nos 355440R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430124) $45.01

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 703929R1. (Item #: 184824, Ref: 350719KIT) $23.00

Rear Rim To Center Bolt - For International / Farmall tractor models Hydro 70, 240, 300, 330, 340, 350, 404, 450, 460, 504, 560, 656, 666, 686, Replaces International OEM number 363017R1, Diameter 5/8", Length 2-1/4", (Item #: 126620) $16.80

Rim Clamp, Used - For International tractor models Hydro 70, Hydro 86, 300, 340, 350, 400 (s/n 5181-later with 38" rims), 450 (s/n 501-later with 38" rims), 460, 504 (with 5" offset wheels), 560, 656, 666, 686, 2504 (with 5" offset wheels), 2656, Replaces International OEM number 363016R1, Adjustable Clamp, For a new version of this item use Item #: 173838, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430075) $10.01

Rim Clamp, Used - For International tractor models Hydro 70, Hydro 86, 300, 340, 350, 400, 450, 460, 504, 560, 656, 666, 686, 2504, 2656, Replaces International OEM nos 373926R1, Fixed Clamp, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430087) $12.76

Spindle Washer - For International / Farmall tractor models Hydro 70, Hydro 86, 385, 404, 424, 444, 454, 460, 484, 485, 504, 544, 584, 585, 606, 656, 664, 666, 674, 684, 686, 784, 884, 5088, 5288, 5488, Replaces International OEM number 369857R1, O.D.: 1.500", I.D.: .795", Thickness: .15", (Item #: 124771) $1.00

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 365326R1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

Wheel Bearing Kit - Timken wheel bearing kit, for front wheels. Kit is packaged in a Timken box with the application and TImken bearing numbers listed on the label. (1) 48703D retainer (1) 370254R91 oil seal (1) 369860R1 gasket (1) LM48510-TIM bearing cup (1) LM48548-TIM bearing cone (1) LM603011-TIM bearing cup (1) LM603049-TIM bearing cone. On tractors with adjustable axle. For 460, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 100856, Ref: TKR7) $34.20

No
Picture
Wheel Bearing Kit - Kit contains 1 LM48548 bearing, 1 LM48510 bearing cup, 1 M12649 bearing, 1 M12610 bearing, 1 369860R1 hub cap gasket, 1 175272 seal, 1 48548D wear sleeve. For tractor models 2606, 460, 504, 544, 606, 656. (Item #: 100855, Ref: WBKIH2) $30.80

Wheel Bolt - This wheel bolt fits the following tractor models: A, B, BN, Super A, 100, 130, 140, B-250, B-275, B-414, 1026, 1066, 1086, 1206, 1256, 140, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 240, 2404, 2424, 2444, 3088, 3288, 330, 340, 354, 364, 384, 404, 424, 444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 444, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 240, 2404, 300, 330, 340, 3444, 350, 364, 384, 404, 424, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 884, B-250, B-275, B-414, 300, 350, 354. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number 51485D. (Item #: 108605, Ref: WB916) $2.30

Wheel Bolt - This wheel bolt fits the following tractor models: A, B, BN, Super A, 100, 130, 140, B-250, B-275, B-414, 1026, 1066, 1086, 1206, 1256, 140, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 240, 2404, 2424, 2444, 3088, 3288, 330, 340, 354, 364, 384, 404, 424, 444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 444, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 240, 2404, 300, 330, 340, 3444, 350, 364, 384, 404, 424, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 884, B-250, B-275, B-414, 300, 350, and 354. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number 51485D. (Item #: 108605, Ref: WB916) $2.30

Wheel Clamp, Used - For International tractor models 300, 330, 340, 350, 460, Replaces International OEM nos 363020R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430830) $36.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.60

Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $16.90

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.30

Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.80

Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.10

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $29.70

Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $35.60

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.50

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.80

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $13.80

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.30

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.10

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.10

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.40

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $13.80

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $24.80

International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.20

International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.10

International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.10

International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.40

International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $13.60

International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $10.20

International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $17.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $18.70

$Farmall 460 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $26.50

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Farmall 460 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Farmall 460 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Farmall 460 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Farmall 460 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Farmall 460 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Farmall 460 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40

$Farmall 460 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

No
Picture
Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $373.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $444.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $444.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $42.20

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $40.80

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.70

No
Picture
Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $40.00

No
Picture
Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $54.00

No
Picture
Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $57.00

No
Picture
Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $23.30

No
Picture
Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $9.40

No
Picture
Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00

No
Picture
Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $23.30

No
Picture
Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.10

No
Picture
Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $86.00

No
Picture
Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.00

No
Picture
Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $12.40

No
Picture
Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $60.00

No
Picture
Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $23.70

No
Picture
Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $7.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $13.98

No
Picture
Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599) $43.80

Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $37.70

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00