International Harvester / Farmall 100 Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Brakes
Brake Band - Lined Brake Band (1). For Super A serial number 339642 and up, 100, 130, 140. If a final drive gasket set is needed for SUPER A, order part number 43245D. Replaces 358660R21, 358660R1. (Item #: 105419, Ref: 358660R21) $30.80
Brake Pedal Shaft, LH - Fits A, AV, B, BN, Super A, Super AV, Super AV1, Super A1, 100, 130, 140. (Item #: 153603, Ref: 51425DX) $171.87
Brake Pedal Shaft, RH - This brake pedal shaft is the right hand side. It is for models A, AV, B, BN, Super A, Super AV, Super AV1, Super A1, 100, 130, 140. (Item #: 153602, Ref: 51507D) $168.00
Brake Plate, Intermediate - For tractor models 100, 1026, 1066, 1206, 1256, 21206, 21256, 2706 farmall serial number 29001>, international serial number 4601>, 2756, 2806 farmall serial number 23001>, international serial number 5701>, 2826, 2856, 706 farmall serial number 29001>, international serial number 4601>, 756, 766, 806 farmall serial number 23001>, international serial number 5701>, 826, 856, 926. (Item #: 105426, Ref: 392777R2) $45.90
Brake Return Spring - For tractor models 100, A, AV, B, BN, Super A, Super AV, 130, 140. Overall length 7 inch, 2 used for brake pedals, 1 used for clutch pedal. (Item #: 125754, Ref: 47845DA) $14.60
Park Pawl - For tractor models 100, 1026, 1066, 1086, 1206, 1256, 1456, 466, 1468, 1486, 1566, 1568, 1586, 186 Hydro, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488 Hydro, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Item #: 113420, Ref: 139141C1) $200.00
Spring Clutch and Brake - Spring, torque amplifer clutch release spring, 3 5/8 inches overall length. For tractor models 100, 130, 140, 400, 450, 560, 660, Super MTA, Super W6TA. (Item #: 179264, Ref: 61084D) $28.10

Clutch
Clutch Assembly - For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404 all with Rockford Style Clutch. New disc and pressure plate assembly (with narrow style fingers). Spring disc, 9 inch disc with 6 splines 1 1/4 inch hub. New release bearing and new pilot bushing and alignment tool (not shown). This kit will replace the early and late style. If you have the graphite bearing, you will also need the new style bearing sleeve and you can order as part number 375493K-Sleeve. Replaces 375493R91, 56631DB, IHS958. (Item #: 118488, Ref: 375493KSP) $208.00
Clutch Assembly - For tractor models A, B, C, Super C, 100, 130, 140, 200, 230, 240, 404, 2404 all with Rockford Style Clutch. New disc and pressure plate assembly (with narrow style fingers). Solid disc, no springs, 9 inch disc with 6 splines 1 1/4 inch hub. New release bearing and new pilot bushing and alignment tool (not shown). This kit will replace the early and late style. If you have the graphite bearing, you will also need the new style bearing sleeve and you can order as part number 375493K-Sleeve. Replaces 375493R91, 56631DB, IHS958. (Item #: 168845, Ref: 375493K) $195.00
Clutch Disc, 9in. Remanufactured - Remanufactured Clutch disc, 9 inch, 4 button spring loaded, 1.250 inch spline diameter, 6 spline. For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404. There is an additional $20.00 for a core charge. (Item #: 205980, Ref: 384384-R4B) $105.72
Clutch Disc, Remanufactured - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 2404, Clutch Size: 9", Clutch Hub: 1-1/4", Clutch Spline: 6, Clutch Center: Solid, Clutch Type: Woven, (Item #: 205978) $93.01
Clutch Disc, Remanufactured, 1944203C1 - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 2404, Replaces International OEM number 1944203C1, 56631DB, 56631DBC, 56631DBR, Clutch Size: 9", Clutch Hub: 1-1/4", Clutch Spline: 6, Clutch Center: Spring, Clutch Type: Woven, (Item #: 203374) $109.50
Clutch Disc, Remanufactured, 384384HD6 - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 2404, Replaces International OEM number 384384HD6, Clutch Size: 9", Clutch Hub: 1-1/4", Clutch Spline: 6, Clutch Center: Solid, Clutch Type: 6 Lg Pads, (Item #: 205979) $139.01
Clutch, Dust Cover - For tractor models A, B, C, Super A, Super C, 100, 130, 200, 230. Cover is 2 inches outside diameter. Check shape and size before ordering. (Item #: 126137, Ref: 57579DX) $14.00
Clutch Fork, Used - For International tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404, Replaces International OEM nos 47716D, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498383) $49.01
Clutch Housing Cover - For Super A, AV, C, Super C, Cub, 100, 130, 140, 200, 230, 240. Clutch Housing Cover is Round with Bracket and Screw. 4-3/16 inches outside diameter, check shape and size before ordering. (Item #: 178674, Ref: 351486R1) $23.80
Clutch Kit, Remanufactured - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404, Clutch Diameter - 9", Clutch Hub Diameter - 1-1/4", Clutch Splines - 6, Clutch Center - Spring, Clutch Type - Woven, Pressure Plate Size - 9", Pressure Plate Levers - 3, Pressure Plate Springs - 6, Pressure Plate Type - Single Stage, Flywheel Step 1.188", For Pressure Plate use Item #: 122000, (Item #: 202009) $231.80
Clutch Pressure Plate, 9 - Rockford Style with wide fingers. Fits Models: 100, 130, 140, 200, 230, 240, 2404, 404, A, B, C FARMALL, Super A, Super C. (Item #: 189609, Ref: 361581R91) $242.00
Clutch Release Bearing Carrier - This clutch release bearing carrier is the carrier only, does not include bearing. For tractor models A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 404, 2404 (Direct replacement for the following when equipped with replaceable throwout bearing A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C) replaces the graphite style (non-replaceable) throwout bearing and carrier number 350830R31 used on early models. Replaces: 6116D, IHS1155. Uses release bearing part number 361292R91. (Item #: 111782, Ref: 375493K-Sleeve) $83.00
Clutch Release Bearing, Greaseable - For tractor models A, Super A, B, C, Super C, H, Super H, 100, 130, 140, 200, 230, 240, 404, 2404. Bearing is 3.375 inch outside diameter, 2.0625 inch inside diameter. (Item #: 100022, Ref: 361292R91) $25.70
Clutch Release Fork - For tractor models 100, 1026, 1066, 1086, 1206, 1256, 1456, 466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Item #: 111850, Ref: 380110R1) $86.00
Clutch Release Shaft - For tractor models 100, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 706, 756, 766, 806, 826, 856, 966. (Item #: 113405, Ref: 380180R12) $86.00
Clutch Release Sleeve and Bearing - Fits, 100 with Ball Bearing Type Clutch Release Bearing, 130, 140, 200 with Ball Bearing Type Clutch Release Bearing, C, Super A. (Item #: 105394, Ref: 364790R91) $138.00
Clutch Release Yoke - This clutch release yoke is 7 5/8 inches overall length. For models A, AI, AV, B, BN, C, Super A, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 404. Industrial A1, 2404. Replaces 47716D (Item #: 178919, Ref: 47716D) $62.80
Pilot Bushing - Inside diameter .883 inch, outside diameter 1.125 inch, thickness .995 inch. For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404. Replaces 364527R1, 364527R2, 364527R91, 43291D, 716678R91. (Item #: 122000, Ref: 364527R91) $9.30
PTO Gasket and Clutch Disc Kit - Same kit as 77721, PTO Gasket and Clutch Disc Kit but also includes discs. For tractor models 100, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 21026, 21256, 21456, 2706, 2756, 2806, 2856, 3388, 3788, 706, 756, 766, 806, 826, 856, 886, 966, 986, all with independent PTO. Contains 9 plates (381489R3), 7 discs (381490R1), gaskets, o-rings (about 50 pieces). (Item #: 117126, Ref: PCK721) $190.00
Transmission Disc, 9 inch - Rockford Style, 6 splines 1.25 inch, spring disc (will replace rigid), fits models: 100, 130, 140, 200, 230, 240, 2404, 404, A, B, C FARMALL, Super A, Super C. (Item #: 118489, Ref: 56631DB) $102.00

Cooling System
Fan Pulley Assembly, Late - This pulley assembly fits Cub and Cub Lo-Boy C-60 engine serial number 165153 and up, Super A with C-113 engine serial number 317192 and up, Super AV and Super AV1 with C-123 engine, Super AV1 with C-113 engine serial number 317192 and up, Super C with C-123 engine, 100 and 130 with C-123 engine, (200, 230 and 240 with C-123 engine below serial number 65000). Fan mounting bolt thread is 12-24 UNC, 3.125 inch bolt pattern. Shaft is 5/8 inch -18 Thread. 4.379 inch outside diameter rear pulley. 4.062 inch outside diameter front pulley. VERIFY MEASUREMENTS. Will not fit 154, 184 or 185. (Item #: 126187, Ref: 131486C91) $152.00
Radiator - For tractor models Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 200 and 230. This radiator is for PRESSURIZED systems only. Inlet = 2-1/2". Outlet = 2". The core is 16-1/8 inches high and 16 inches wide. NOT FOR EARLY TRACTORS THAT DID NOT HAVE A WATER PUMP. Replaces 356356R96, 358104R93 (Item #: 101710, Ref: 356356R94) $410.00
Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91) $6.60
Radiator Cap - 4 pound Pressure Cap. For tractor models 100, 140, 200, 230, 300, 330, 350, 400, 450, B450, 460, 560, 600, 650, 660. Replaces: 361705R91, 370871R91, 362323R91. Not for short filler neck. (Item #: 108081, Ref: D25826) $10.00
Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 and WD6, **Super W9 and WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Item #: 112331, Ref: 180224M91) $6.60
Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.60
Radiator Cap Pressurized - For International / Farmall tractor models 100, 130, 140 (s/n 13967-earlier), 200, 230, 240, 330, 340, 460, 560, 600, 650, 660, Replaces International OEM number 393229R91, 362323R91, 370871R91, 2.050 radiator neck I.D.. Measure radiator neck before ordering, 7 PSI, (Item #: 112332) $6.98
Radiator Hose - Bulk 3 x 2-3/8" - For International / Farmall tractor models Super C, 100, 130, 200, 230, 240 Replaces International OEM number 355688R2, 407011R1, , Compatible with John Deere tractor models B (s/n B60000-later), BN (s/n B60000-later), BNH (s/n B60000-later), BO (Not Styled), BR (Not Styled), BW (s/n B60000-later), BWH (s/n B60000-later), R, Replaces John Deere OEM number B402R, R189R, B406R, R32654, I.D.: 2-3/8" (2.375"), O.D.: 2-3/4" (2.750"), Length: 3', For Hose Clamp use Item #: 111917, (Item #: 114082) $32.10
Tower Hose Clamp 2.685" to 2.995" - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, H, Super A, Super C, Super H, 100, 130, 140, 200, 230, 240, 300, 330, 350, 400, 450, 656, 706, 756, 806, 826, 856, 2706, 2756, 2806, 2826, 2856, Compatible with International Harvester (s) 55, 350, 550, 650, Replaces International OEM number 39205H, 706081R91, (Item #: 130443) $7.70
Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub Lo-Boy. (Item #: 178066, Ref: 45314DC) $12.90
Water Pump - Used on engines D239, DT239, D268, D310, D358 OR D402, on models 1046, 1055, 1055XL, 1056, 1056XL, 1255, 1255XL, 1455, 1455XL, 743, 743XL, 744, 745, 745S, 745XL, 833, 840, 940, 946, 955, 955XL, 956, 956XL, TD7, TD8, 100, 125, this part replaces OEM numbers 3132741R93, 3132738R92, 3132741R92, 3132741R94, 3138936R92, 3144456R93, 9144456R93. This is a new pump with gasket. (Item #: 113407, Ref: 3132741R93) $93.00
Water Pump Gasket Set - This set is included with 355760R93 water pump. Set includes 68104C1 and 355769R1. (Item #: 183008, Ref: 68104C1) $10.90
Water Pump - New - With pulley, fits A, B, C and models with C123 Gas Engine: 100, 130, 200 serial number <501-65000, 230 serial number <501-65000, Farmall 240 serial number <501-65000, Super A, Super C. Casting number 367683, 367684 or 372241. (Item #: 107899, Ref: 355760R93) $67.00
Water Pump, Remanufactured, 123868 - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 200, 230, 240, Replaces Casting number 123868, Includes Mounting Gasket, With Pulley, (Item #: 206125) $112.01
Water Pump, Remanufactured, 3132677R1 - For International Construction and industrial models TD7, TD8, 100, 125, Replaces International Casting number 3132677R1, Includes Mounting Gasket, With Hub, (Item #: 206109) $185.01
Water Temperature Gauge - For 100, 130, 140. Water Temperature Gauge with 9" Lead, "IH" Logo. (R4182) (Item #: 178425, Ref: 406989R91) $51.15

Decals and Emblems
Decal Set - This is a set of 13 misc. decals for tractor models:100, 130, 140. (R3596V). These are printed on Vinyl, die cut. (Item #: 100947, Ref: R3596) $30.50
Front Emblem - For tractor models 100, 130, 200, 230. Front Emblem "IH" Block. (Item #: 103916, Ref: 362513R1) $62.00
Hood Ornament - Chrome. Comes with mounting hardware. Fits [Cub Cadet: 70, 71, 72, 73, 100, 102, 104, 105, 122, 123, 124, 125, Cub Cadet (All up to serial number 399999)] International - Fits Cub (serial number 210001 to 248124), Cub Lo-Boy (serial number 10001 and up). As a Radiator Ornament: 154, 184, 185. (Item #: 178498, Ref: 392718R1) $25.40
IH Decal, 1-5/8", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1 5/8", no background, (Item #: 101024) $2.60
IH Decal, 1", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1", no background, (Item #: 101023) $1.70
IH Decal, 3" x 3-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 3" x 3-1/2", No background, (Item #: 101025) $10.20
IH Decal, 4-1/2" x 5" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 4-1/2" x 5", Mylar decal, (Item #: 101095) $5.10
International Decal, 17", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 17" long, Black, Mylar decal, (Item #: 101105) $5.10
International Decal, 8-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 8 1/2" long, Black, Mylar decal, (Item #: 101104) $3.40
International Decal Set, 100, 130, 140, Mylar - For International / Farmall tractor models 100, 130, 140 (Gas), Vinyl decal set use Item #: 100947, (Item #: 101076) $27.10
International Decal Set,10" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 10", (Item #: 101022) $27.10
International Decal Set, 1 1/4" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-1/4", (Item #: 101018) $2.60
International Decal Set, 1 3/4"x 1 5/8" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-3/4", (Item #: 101019) $3.40
No Picture International Decal Set, 6 1/2"x 7" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo 7", Vinyl Cut, Shaded Outline, (Item #: 101020) $15.30
No Picture International Decal Set, 7 1/4"x 8" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 8", (Item #: 101021) $20.30
International Harvester Decal, 2-3/4" x 3" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, (Item #: 101093) $3.40
International Harvester Decal, 2" x 2-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/2", No background, Mylar decal, (Item #: 101097) $3.40
International Harvester Decal, 2" x 2-1/4", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/4", Mylar decal, (Item #: 101092) $3.40
International Harvester Decal, 5-1/2" x 6", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 5-1/2" x 6", Mylar decal, (Item #: 101096) $5.10
International Harvester Decal, 5-1/2" x 6", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 5-1/2" x 6", No background, Mylar decal, (Item #: 101098) $5.10
International Harvester Decal, 5" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 5" diameter, Shaded outline, Mylar decal, (Item #: 101099) $5.10
International Harvester Decal, 6" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 6" diameter, Shaded outline, Mylar decal, (Item #: 101100) $6.80
International Harvester Decal, 7-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 7 1/2" diameter, Shaded outline, Mylar decal, (Item #: 101101) $8.50
International Harvester Decal, 9", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 9" diameter, Shaded outline, Mylar decal, (Item #: 101102) $10.20
International Hood Decal, 23-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, Size: 23-1/2", Black lettering, (Item #: 101031) $13.60
International Seat Adjustment Decal, Black and Yellow, Mylar - For International / Farmall tractor models 100 (Deluxe Seat), 130 (Deluxe Seat), 140 (Deluxe Seat), 460, 560, Mylar sticker, yellow and black, (Item #: 101091) $3.40
McCormick International Decal, 10" Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 10" long, Black and white, Vinyl decal, (Item #: 101103) $8.50
McCormick International Decal, Hood, White/Black, 7-1/4", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 7-1/4" black and white, Vinyl decal, (Item #: 101026) $6.80
Side Emblem - This side emblem measures 16 inches long and 1 1/4 inches tall for tractor models 100, 130, 200, 230. Side Emblem. "FARMALL". For 1 Side, 1 piece. (Item #: 103927, Ref: R4205) $49.60
Side Emblem - For 100. This Side Emblem "100", measures 3 1/2 inches wide and 1 7/8 inches tall. Made of Stainless Steel. Includes Clips. Price is for 1 piece for 1 side. Replaces 362509R1 (Item #: 103917, Ref: R2537) $21.00
Side Emblem - This Side Emblem measures 5 7/8 inches long and 1/2 inch tall. This fits tractor models Cub (serial number 185001 to 210000), 100, 130, 200, 230, Cub Lo-Boy: Cub Lo-Boy (up to serial number 10000); Replaces: 362389R1. McCORMICK. 1 piece for 1 side. Replaces OEM number 362389R1. (Item #: 103925, Ref: R4203) $40.30

Drive Train
Axle Oil Seal - This axle oil seal fits the following tractor models: A, Super A, 100, 130, 140, and Cub. It has an inside diameter of 1.750 inches, an outside diameter of 2.632 inches, and a width of 0.500 inches. It replaces part numbers: 264698R91, 273563R91, 275596R91, 357768R91, 382220R91, 383387R91, and 53599D. (Item #: 182568, Ref: 264698R91) $19.20
Final Drive Flanged Axle Outer Seal - This final drive flanged axle outer seal has a 2.375 inch Inside Diameter, a 3.255 inch Outside Diameter and is .5 inch wide. It Fits: 100, 130, 140, 660, 770, 780. Replaces: Felt washer: 362777R1, Seal: 363771R91, 536144R91, 362767R91 (Item #: 179297, Ref: 362777R1) $26.30
Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.90
Gear, Transmission Oiler Slinger - Also replaces 58340D. For tractor models 100, 130, 200, 230, 240 with High Speed and Low Reverse Attachment, A serial number 39022>, B serial number 39022>, A, C, Super A, Super C. (Item #: 172572, Ref: 354643R11) $199.00
Oil Seal - Fits: [A, A-I, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 2404, 404 (Top Transmission Shaft Front Seal)], [B-250, B-275, B-276, B-414, 2300, 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444 (Bull Pinion Shaft Bearing Retainer Seal)], [Cub, Cub Lo-Boy, 154, 184, 185 (Final Drive Upper Pinion Shaft Seal)], [M, MD, MDV, MV (Transmission Counter Shaft Front Seal)], MTA (Front Wheel Seal; with single front 900 x 10 wheel), [O4, OS4 (PTO Output Shaft Seal; serial number 2159 to 9300)], [Super M, Super MD, Super MDV, Super MV (Transmission Counter Shaft Front Seal; up to serial number F52627 and up to seril number L51241)], W4 (PTO Output Shaft Seal; serial number 786 to 9300). Replaces: 21969D, 264694R91, 287440R91, 3043788R91, 3043788R92, 358765R91, 358784R91, 358808R91, 358823R91, 381907R91, 42177D, 43278D, 50839D, 530969R91, 703907R91, 703908R92, A29424. (Item #: 178204, Ref: 381907R91) $6.00
Seal, Differential Ball Bearing - For tractor models A, A1, AI, AV, B, BN, Super A, Super A1, Super AV, Super AV1, 100, 130, 140. This seal measures 2.378 inches outside diameter, 1.531 inches inside diameter and 0.500 inches wide. wide. 2 used per tractor, sold individually. Replaces: 358773R91, 358813R91, 381742R91, 383340R91, 385865R91, 45175D, 46282D, 71597C1, 71597C91 (Item #: 172757, Ref: 71597C1) $26.30
Transmission Gasket Kit - This three piece Transmission Gasket Kit includes transmission shift cover gasket, transmission spline shaft bearing retainer gasket and counter shaft bearing cage gasket. It fits: A, AV, B, BN, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140. Replaces original part numbers 1342393C1, 46503D, 47279DA, 47283D, 47283DB (Item #: 178158, Ref: 1342393C1) $32.00

Electrical System
Alternator - Tisco remanufactured Delcotron alternator, 42 amp, internal regulator, 3 terminal 3 o-clock position. Sold outright, no core, deposit, or return. Tractors Cub, Hydro 70, Hydro 86, 100, 186, 140, 464, 574, 666, 674, 868, 766, 786, 886, 986, 966, 1066, For 100, 1066, 1086, 140, 1466, 1468, 1486, 1566, 1568, 1586, 186, 2500A, 464, 574, 666, 674, 686, 766, 786, 86, 886, 966, 986, Cub, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 113608, Ref: 1100583) $115.00
Alternator - Alternator, 12 volt, 61 amp, external regulator, 2 terminal 12 o-clock position. For 100, 1000, 105, 1066, 110, 1100, 1110, 115, 120, 1200, 1206, 1256, 1275, 1300, 1456, 1466, 1468, 200, 205, 210, 21206, 21256, 21456, 222, 225, 23, 230, 2444, 2544, 2606, 2656, 2706, 275, 2756, 2806, 2856, 3110, 315, 3410, 3444, 3514, 3516, 3616, 375, 3800, 3850, 403, 4100, 4300, 444, 503, 504, 544, 601, 602, 606, 616, 622, 656, 706, 756, 766, 806, 815, 856, 915, 966, HYDRO 100. (Item #: 113606, Ref: 1100883) $123.00
Alternator, 12 Volt - For tractor models 100, 130, 140, 786, 886, 986, 1086, 1486. Replaces 1987560C1R, 1117898. (Item #: 113608, Ref: 103798A1R) $115.00
Alternator Bracket Kit - This alternator bracket has a 2 inch gap for the alternator part number 8NE10305SE and will fit the following tractor models A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 200, 230, will also work for Power units U2, U2A. (Item #: 127584, Ref: IHALTBKIT) $65.00
Battery Box Panel - Left Hand - For International / Farmall tractor models Super A (s/n 348644-later), Super AV (s/n 348644-later), Super C (s/n 176523-later), 100, 130, 140, 200, 230, Replaces International OEM number 358540R11, Includes clips, (Item #: 104009) $74.17
Coil, Original, 12 Volt - OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. This is an International Harvester OEM style 12 volt distributor coil. This distributor coil has a 2.8 ohm rating between the two primary winding terminals. Requires an external resistor. (Item #: 154651, Ref: 353875R91) $64.00
Coil, Original, 6 Volt - OEM style coil. Measures overall length of 5 3/8 inches, Diameter at widest point of center ridge is 2 1/4 inches. This distributor coil has a 1.4 ohm rating between the two primary winding terminals. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Item #: 154650, Ref: 353874R91) $62.00
Distributor - Original IHC design comes with a 32 tooth drive gear. For tractor models Super W6TA, Super W9, Super WD6, Super WD6-TA, Super WD9, Super WDR9, W4, W400, W450, W6, W9, WD6, WD9, WDR9, WR9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 504, 600, 650, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 3514. R6332. MHSK1 (Item #: 124839, Ref: 107304C91) $114.00
Distributor - New and complete distributor comes with a 32 tooth gear, and is for tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA and other IH equipment with International Distributors. Replaces: 107296C91, 107299C91, 107302C91, 107304C91, 353890R91, Distributor Housing Casting Number: 353898R11, 354900R91, 357935R91, 362473R91, 362722R91, 364653R91, 364696R92, 366928R91, 372712R91, 380622R91. Uses IH points (included). (Item #: 124839, Ref: 107304C91) $114.00
Distributor Breaker Plate - Used on International Distributors, this plate is where points are secured. Points not included. Four Cylinder Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Replaces 352277R11 (Item #: 190142, Ref: 352277R11) $24.90
Distributor Cap - 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Item #: 105571, Ref: 351693R92) $8.90
Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1 (Item #: 178117, Ref: 353894R1) $16.80
Distributor Drive Housing - This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Item #: 178938, Ref: 363749R91) $107.00
Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10
Distributor Gear - This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Item #: 111179, Ref: 353902R1) $31.40
Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $8.90
Distributor, Rebuilt - Complete remanufactured distributor for Farmall Cub, A, B, C, Super A, H, M, Super H, Super M, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504 tractors with IH distributor with 353898R1 housing casting number. IH original part numbers 353890R91, 107304C91. A refundable $50.00 core charge will be added to your order. (Item #: 203587, Ref: 353898R1) $235.01
Distributor Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 110266, Ref: 353896R1) $4.20
Distributor Shaft Bushing and Shim Kit - International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches. (Item #: 178766, Ref: IHS3166) $44.80
Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.80
Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20
Distributor with base and tach drive, Remanufactured - For International / Farmall tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 2504, With tachometer drive and with base, Includes new distributor cap, points, condenser, 6V coil, and all other parts needed for a thorough rebuilt unit, (Item #: 203589) $350.01
Distributor with base less tach drive, Remanufactured - For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2404, 2424, 2444, 2504, 3444, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models T6, T340, 500, Without tachometer drive and with base, Includes new distributor cap, points, condenser, 6V Coil, and all other parts needed for a thorough rebuilt unit, (Item #: 203588) $235.01
Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Item #: 105084, Ref: 1442P6) $186.00
Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve Ground System only. (FOR NEGATIVE GROUND order part number 1442). Use with distributor number 357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. (Item #: 105085, Ref: 1442P12) $174.00
Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Item #: 105083, Ref: 1442) $160.00
No Picture Generator - A&I Description error does not fit cub (Item #: 172496, Ref: 1947580) $323.32
H4 Magneto Pinion Driven Gear - This gear has 24 teeth and measures: 0.380 inch inside diameter, 0.759 inch outside diameter, 1.075 inch gear outside diameter, 0.952 inch overall height. It is used on H4 Magnetos. (Item #: 183878, Ref: 49420DX) $21.98
Hand Crank Mounting Bracket - For International / Farmall tractor models A, B, Super A, 100, 130, 140, Replaces International OEM number 350639R91, (Item #: 122097) $26.78
Ignition Switch - For the following Models using a magneto: Cub, Cub Lo-Boy, A, B, C, H, M, 100, 130, 140, 200, 230, 300, 350, 400. NOT like original. (Item #: 111178, Ref: 54207DB) $13.40
Ignition Switch - This Ignition Switch is for Distributor Ignition Systems. This is a 2 terminal switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230 (Item #: 117579, Ref: R2720) $40.60
Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $14.30
Lighting Switch Dimmer Resistor - For International / Farmall tractor models A, B, Cub, H, HV, M, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, TD6, TD9, W4, W6, W9, 100, 130, 200, 230, 300, 350, 400, 450, Replaces International OEM number 47889D, Will Not Fit 154, 184, 185, (Item #: 126566) $16.00
Magneto - This is a New Wico Magneto used on Farmall / IH Models: A, AV, B, BN, C, H, HV, I9, M, MTA, MTAV, MV, O4, O6, OS6, Super A, Super C, Super H, Super M, W4, W6, W6TA, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650. It is also used on some industrials and power units. (Item #: 180178, Ref: XH1344) $558.00
Magneto Coil Cover - For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105661, Ref: 47449DAY) $29.50
Magneto Condenser - Condenser for IH Models using H4 F4, J4 Magneto (replaces 373892R91). For tractor models 100, 130, 200, 300, 350, W4, W6, A, B, BN, C, H, M. Note, this condenser will ship as one of two functionally identical versions shown, a long piece OR a short with an extension, depending on stock available. Replaces 21409DA, 21409DB, 354136R92, 373892R91, 47546D, 71455C91 (Item #: 111418, Ref: 71455C1) $10.40
Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105662, Ref: 47413DYC) $17.00
Magneto Gasket Set - This magneto gasket set is for H4 Magnetos. It contains; Coil cover gasket 47453D, Distributor body gasket 47408D, Distributor gear cover gasket 49419D, Condenser hole cover gasket 359966R1 (48472DA), Magneto mounting gasket 55780DE (55780DD). Replaces: 359966R1, 47408D, 47453D, 48472DA, 49419D, 55780DD, 55780DE, E4226. For tractor models A, AV, B, BN, C, H, HV, I4, I6, I9, M, MTA, MV, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, T4, T5, T6, T9, U2, U2A, U4, U6, U9, W4, W6, W6TA, W9, WR9, WR9S, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, 400, 450 (Item #: 111272, Ref: MGK103) $9.00
Magneto Points - Point Set Fits J4 and H4 Magneto (can work with F4 magneto with modify) (Item #: 111110, Ref: 353171R91) $9.00
Magneto, Remanufactured, 374867R91 - For International / Farmall tractor models A, B, C, H, M, W4, W6, 100, 130, 200, 300, 350, Replaces International OEM number 374867R91, Right-hand flange mount, International H4 magneto, For Tune-Up Kit use Item #: 105661, (Item #: 203606) $1025.01
Magneto Rotor H4 Magneto - This Rotor is used on tractors with H4 magneto. Replaces 47425DX, 47425DY, 47428DA (Item #: 111106, Ref: 47425DY) $11.00
Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Item #: 105297, Ref: 21A10R) $22.90
Point Set - For International / Farmall tractor models A, B, C, H, M, W4, W6, 100, 130, 200, 300, 350, Replaces International OEM number A2437A, Fits Fairbanks Morse FM-XV magneto, (Item #: 111707) $17.10
Pulley - This Pulley measures: 1.480 Inches Wide, 4.220 Inch Outside Diameter, 0.670 Inch Shaft Diameter. It is used with 16mm (5/8 inch) Belts. Replaces 384645R1, 24-1105, ADR5022 (Item #: 121930, Ref: 384645R1) $31.80
Spark Plug - Spark Plug 18MM Thread Diameter for: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. Replaces OEM number 360942R1. Also replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs (Item #: 111742, Ref: AL386) $3.10
Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H8, H8J, H10, H11, H12, J8 spark plugs. For tractor models 100, 104, 106, 108. Price is for 1 plug. If you need 4, you need to order 4. Verify correct spark plug size and type (Item #: 111743, Ref: AL295) $4.20
Spark Plug Wire Set, Custom - IH or Delco Distributors and Magnetos. For the following models with 90 degree angle boots: A, I4, AV, Super A, Super A1, Super AV, SuperAV1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, H, HV, Super H, Super HV, M, MD, Super M, Super MD, Super MDV, MDV, Super MDVTA, MTA, Super MTA, MV, Super MV, Super MVTA, O4, O6, ODS6, OS4, OS6, T340, T5, T6, TD6, SuperW4, W4, Super W6, Super W6TA, W6, W6TA, Super WD6, WD6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404, 424, 444, 450, W450, 504. Replaces the following OEMS: 352947R91, 352951R91, 352954R91, 352956R91, 356687R92, 356689R92, 356691R91, 356694R92, 356695R92, 356697R93, 362439R91, 362789R91, 407487R1, 45327DA, 46277DA, 50075D, 52794D, 65352D, 65357D, 65358D, and 65359D. (Item #: 120100, Ref: S.67475) $16.00
Starter - This is a new 6 volt starter with Solenoid. It is original equipment on Farmall 140HC and 240. It has a 10 tooth drive with counter clockwise rotation. It replaces; International part number 360606R91, Delco 1107174. Note this starter can also be used for converting earlier tractors with mechanical starter buttons (starters Delco 1107093 and 1107067, IH part numbers 355794R91, 355794R92)to electronic starter with a key or momentary button switch. We do not have wiring instruction for this conversion. Replaces 1107174, 1108098, 360606R91, 370606R91 (Item #: 185608, Ref: 1107174) $312.00
Starter, 6 Volt - For C113 and C123 Gas engines on: A, B, C, Super A, Super C, 100, 130, 140, 200, 230. Replaces Delco 1107093, 1107067, 1108096. (Item #: 109655, Ref: SDR0092) $127.00
Starter, 6 Volt - New 6 volt starter for tractor models A, B, C, Super A, Super C, 100, 140 (to serial number 26800), 200, 230, 240. All 1952-1961 with C113 or C123 gas engines using starter switch mounted to the starter. Replaces Delco 1107093 and 1107067. Replaces IH part numbers 355794R91, 355794R92 Uses 593292C1 starter switch. If you have a solenoid on your starter, this is not the starter you need (see part number 1107174). This starter uses a saddle mounted push button switch. (Item #: 109655, Ref: 1107093R) $127.00
Starter Armature - Used with Delco Starter # 736C, 737B, 737G, 1107067, 1107074, 1107093, 1107169, 1107174, 1107404, 1107407, 1107408, 1107427, 1107430, 1107435, 1107444, 1107448, 1107462, 1107487, 1107490, 1107926, 1107999, 1108012, 1108016, 1108038, 1108041, 1108060, 1108080, 1108092, 1108097, 1108103, 1108112, 1108142, 1108158, 1108173, 1108174. Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Item #: 182636, Ref: 1871662) $93.58
Starter Drive - Starter drive, services Delco starters: 1107854, 1108343, 1108691, 1109360, 1108334, 1108344, 1109252, 1113201. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 966, 1066, 1466, 1468, 2504, 2656, 2706, 2756, 282 For 100, 1066, 1466, 1468, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 86, 966, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 110771, Ref: 1877347) $26.30
Starter Drive - This Starter drive fits gas engines for the following models: A, B, C, H, M, Super A, Super C, Super H, W4, W6, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450 Replaces OEM# 1107021, 1107412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 1107408, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. (Item #: 107059, Ref: 565549) $32.50
Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01
Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style. For A, B, C, H, M, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450, Super A, Super C, W4, W6 all using the following starters 1107021, 2207412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 11074808, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Item #: 112575, Ref: 565549-New) $55.48
Starter Drive Parts - Complete unit available as 356037R91 (Item #: 178541, Ref: SPD12) $139.00
Starter Drive Spring - Spring, main drive, for starter 77695H. Tractors:Super A, C, Super C, H, M, Super M, 4, W4, 6, W6, Super W6, 100, 130, 140, 300, 330, 340, 350. For 100, 130, 140, 300, 330, 340, 350, 4, 6, C, M, Super C, Super M, Super A, W4, W6 (Item #: 111718, Ref: 1860639) $31.00
Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $64.00
Starter Solenoid - Starter solenoid for 6 volt starters A, B, C, Super A, Super C, 100, 140, 200, 230, 240, 300, 340, 350, 400. All 1952-1961 with C113 or C123 gas engines using starter switch mounted to the starter. Replaces 25A266, DR1465. (Item #: 105670, Ref: 142364HA) $23.30
Starter Switch, Manual - Starter Switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A and AV, Super C, H, HV, Super H and HV, Super M and MV, Super W6 and WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 mounting holes, 190 inside diameter. With 1-3/8 inch centers. Replaces Delco 1918405, 1932131, and OEM IH number 593292C1. (Item #: 105669, Ref: 1925781) $9.20
Starting Rod - Starting rod, Pull to start. For Super A, 100, 130. (Item #: 115088, Ref: 350739R2) $22.30
Starting Switch Lever - Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. Replaces: 1918322, 1919434 (Item #: 110972, Ref: 1918322) $10.00
Tune-up Kit - This Tune-up Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 111814, Ref: IHTK1) $30.30
Tune-up Kit, Basic - This basic tune-up kit is for 4 cylinder gas engines with battery ignition from 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Item #: 105572, Ref: ATK5BIR) $13.40
Voltage Regulator, 6 Volt, Positive Ground - REPLACES 121578C1, Delco 1118308, 1118780 and 1119575. Fits tractor models: 100, 130, 140, 200, 330, 340, Cub, Cub Lo-Boy, Super A, Super C, H, M, MTA. This external voltage regulator has a flat base for mounting. There are 4 terminals (lights, battery, field and generator). Designed for A type circuits in positive ground systems with 2 brush generators Measures 7 to 9 output amps. (Item #: 105516, Ref: GDR6003) $30.00
No Picture Wiring Harness - Wire harness, Rear Light, For 100, 130 (Item #: 179828, Ref: 363476R91) $299.94
No Picture Wiring Harness Kit - For tractor models 100, 130. (Item #: 180665, Ref: R4152) $331.87
No Picture Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models 100, 130. (Item #: 182742, Ref: 370816R91) $114.30
Wiring Harness - Partial - For ignition switch and lighting switch power supplies on the following tractors: Super A, A-1, AV, AV1, C, Super C, 100, 130, 140, 200, 230 (Item #: 161964, Ref: 358109R92) $29.60

Engine Bearings
Main Bearings 0.030 - Main bearing set in 0.030. For C113 and C123 4-cylinder gas engines. (1 Kit used per engine). For tractor models A, AV, B, BN, Super A, Super AV, Super A-1, Super AV-1, C, Super C, 100, 130, 140, 200, 230, 240. Journal measures 2.095. YTO MBK113-030. Replaces 372116R91 and 7372116 (Item #: 106564) $75.01
Main Bearings .010 - Main bearing set in 0.010. For C113 and C123 4-cylinder gas engines. (1 Kit used per engine). For tractor models A, AV, B, BN, Super A, Super AV, Super A-1, Super AV-1, C, Super C, 100, 130, 140, 200, 230, 240. Journal measures 2.115. YTO MBK113-010. Replaces 376639R91 and 7376639. (Item #: 106562) $57.00
Main Bearings .020 - Main bearing set in 0.020. For C113 and C123 4-cylinder gas engines. (1 Kit used per engine). For tractor models A, AV, B, BN, Super A, Super AV, Super A-1, Super AV-1, C, Super C, F12, F14, 100, 130, 140, 200, 230, 240. Journal measures 2.105. YTO MBK113-020. Replaces 376642R91 and 7376642. (Item #: 106563) $86.75
Rod bearings - Rod bearing in .030. For C113 and C123 Gas engines. Journal Measure 1.720 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-030, 356305R1, and 7356305. Sold individually. (Item #: 106448) $16.40
Rod Bearings - Rod bearing in .002. For C113 and C123 Gas engines. Journal Measure 1.748 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-002, 360218R11, and 7356306. Sold individually. (Item #: 106445) $14.90
Rod Bearings - Rod bearing in .020. For C113 and C123 Gas engines. Journal Measure 1.730 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-020, 376638R11, and 7376638. Sold individually. (Item #: 106447) $5.80
Rod Bearings - Rod bearing in standard. For C113 and C123 Gas engines. Standard Journal Measure 1.750 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-STD, 356304R11, and 7356304. Sold individually. (Item #: 106444) $12.40
Rod Bearings, .010 - Rod bearing in .010. For C113 and C123 Gas engines. Journal Measure 1.740 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-010, 376636R11, and 7376636. Sold individually. (Item #: 106446) $13.30
No Picture Rod Bearing Set, 4 Cylinder, Standard - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113, C113 (gas), C123, C123 (gas), Standard Journal Measure 1.750 inches, (Item #: 183958) $46.00
Rod Bearing Standard - This is a single rod bearing for International Engines: D155, D179, D206, D239, D246, D268, D310, D358. Replaces 3055218R1. Order on for each connecting rod. (Item #: 191598, Ref: CRK239D) $8.80

Engine Gaskets
Crank Seal, Front - For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super A serial number 310300>, Super AV, Super AV serial number 255418-310299, Super AV serial number 310300>, Super C, U-2 swrial number <22113, U-2A serial number <22113. (Item #: 172671, Ref: 389407R92) $9.90
No Picture Crank Seal, Rear - Fits, 100, 130, 140, 200, 22, 230, 330 serial number <100500, 340 serial number <100500, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super A serial number 310300>, Super AV, Super AV serial number 255418-310299, Super AV serial number 310300>, Super C, U-2 serial number <22113, U-2A serial number <22113. (Item #: 106651, Ref: 24425D) $19.20
Front Crankshaft Seal - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Super A, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine (s) C60 (Gas and LP), C113 (Gas and LP), C123 (Gas and LP), C135 (Gas and LP), C146 (Gas and LP), C153 (Gas and LP), Replaces International OEM number 379620R92, 378193R91, 350708R1, 355769R1, 46179DC, (Item #: 106638) $14.60
No Picture Full Gasket Set - For A, Super A, B, C, Super C, F-14, 100, 130, 140, 230, 240 with Water Pump Gasket (Item #: 106716, Ref: FS3150) $92.00
Gasket, Manifold, Pack of 2 - Used with 251175R1 Manifold. Fits Models: A, B, C, Super C, Super AV, AV, BN, T340, T5, Super A, 100, 130, 140, 200, 240, 330, 340, 404, 424, 444, A1, T4B, AI, All with 113, 123, 135, 146 and 153 CID Gas, LP or Distallate engines. Price is for two. Replaces 24520D, 24520DA, 352014R1, 48696D, 48696DA (Item #: 101551, Ref: 352014R1) $12.30
Head Gasket - For International / Farmall tractor models C, Super A (Farmall, 1/47-12/53), Super A (V, Farmall, 1/47-12/53), Super A (1, Farmall, 1/54-12/55), Super A (V1, Farmall, 1/54-12/55), Super C (Farmall, 1/51-12/53), 100, 130, 140, 200, 230, 240, 330, 340, Compatible with International Construction and industrial models T340, TC5, 500, Compatible with International Engine (s) C113 (with water pump conversion), C123, C135 (s/n 100500-earlier), Compatible with International Hay Cutting (s) 201, Replaces International OEM number 356313R1, 366300R3, 366300R2, This head gasket is used on applications with a water pump, For 9 Stud Cylinder Head, For Applications Without Water Pump use Item #: 168314, (Item #: 160771, Ref: 356313R2) $40.50
Head Gasket Kit - Upper gasket set with head gasket. For C123 CID gas 4 cylinder engine on tractors: Super A-1 and AV-1 serial number 310300 and up, Super C~ 100 and 200. For 400, 450, M, MD, MDV, MV, Super M, Super MD, Super MTA, Super W6, Super WD6, W400, W450, W6TA. (Item #: 106677, Ref: 357476R95) $76.00
Liner Sealing Ring - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113, C123, Replaces International OEM number 24434D, Sleeve OD: 3.30", (Item #: 128621) $5.20
No Picture Manifold Gasket - For International / Farmall tractor models B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2500, 2504, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models 500, Replaces International OEM number 352014R4, (Item #: 167139) $7.30
Manifold Gasket Set - For International / Farmall tractor models A, B, C, Super A, Super C, 100, (Item #: 101543) $8.00
Oil Pan Gasket - For 140, 130, 100, 140, 300, 22, 230, 240, 330, 340, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, SUPVER AV, Super C, - ALL WITH C113 OR C123 ENGINES. (Item #: 106698, Ref: 43458DB) $8.10
Oil Seal - Fits: [A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240 (use as a flat belt pulley shaft seal)], [H, HV, Super H, Super HV (use as a transmission counter shaft front seal)], [O4, W4 (Used as a brake shaft oil seal)]; The seal measures 1.375 inches inside diameter, 2.110 inches outside diameter, 0.315 inches wide. Replaces: 356502R91, 356503R91, 358781R91, 358820R91, 367810R91, 369146R91, 43308D, 43660D, 48308D, 48954D, 71700C1, 71701C1. (Item #: 152182, Ref: 71701C1) $5.10
Overhaul Gasket Set - For Super A1 and AV1 (serial number 310300 and up), Super C, 100, 130, 140, 230, 240, 330, 340 using C123 or C135 gas engines. Includes all gaskets including crankshaft seals. (Item #: 106716, Ref: GK7640S) $92.00
Rear Crankshaft Seal Kit - Fits tractor models A, AV, B, BN, C, F12, F14, I12, I14, O12, O14, W12, W14 (2-piece rear felt seal ONLY fits as a rear crankshaft seal), Super A, Super A-1, Super AV, Super AV-1, Super C 340 (gas, up to engine serial number 100500), 100, 130, 140, 200, 230, 240, 330. Replacement part number and kit contents: (2) 24425D, 24425DA felt seals, (2) 43447D, 43447DA seal retainer center gaskets, (1) 43448D seal retainer to block gasket, (4) 43445D seal plate felt plugs, and (4) 43446D, 43446DA seal retainer plate gaskets. (Item #: 182488, Ref: IHS2416) $25.10
Seal, Crankshaft, Front with wear sleeve - Front Crankshaft Seal. For 100, 130, 140, 200, 230, 240, 330, 340, Super A-1, Super AV-1, Super C, Cub serial number <261717, Cub Lo-Boy serial number <261717. (Item #: 178053, Ref: 378193R91) $37.10
Timing Cover Gasket Set - This Timing Cover Gasket Set contains: Governor housing gasket, Water pump plate gasket, Fan bracket gasket, Timing cover gasket, Front crankshaft seal with seal saver and Lower water outlet gasket. Use on C113, C123, C135, C146, and C153 Gas or LP engines. Fits A, AV, B, BN, C, Super A, Super AV, Super C, 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 330, 3514, 404, 424, 444, 504. Replaces OEM part numbers: 45875D, 375745R1, 375745R2, 43294D, 43294DA, 46179D, 46179DC, 43442D, 49177D, 378193R91, 46871D, 68104C1, 68104C2. (Item #: 182535, Ref: 46179DKit) $32.00
Valve Cover Gasket - This Valve Cover Gasket is used on Gas Engines; C113, C123, C135, C146, C153. It replaces OEM/Original part numbers 43378DB, 43378DD, 43378DE. (Item #: 128613, Ref: 43378DE) $10.40

Engine Rebuild Kits
Basic Engine Overhaul Kit, Less Bearings - Basic Engine Kit, less bearings for tractor models: Super A1 and Super AV1 serial number 310300 and up, Super C; 100 and 200 (C123 CID 4-cylinder gas). For tractors with stepped head pistons. Overbore from 3 1/8 inch to 3 1/4 inch. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130578, Ref: BEKH1159-LCB) $448.00
Engine Rebuild Kit - Less Bearings - 3.25" Overbore, C113, C123 - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113 (Gas), C123 (Gas), 3.25" overbore, Flat Top Pistons, Lower Sleeve O.D. 3.43", Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106564, (Item #: 131097) $439.00
No Picture Engine Rebuild Kit - Less Bearings - 3.437" Liner Seal I.D., C123 - For International / Farmall tractor models C (s/n 48000-48499), Super A (s/n 356001-later), Super C, 100, 200, Compatible with International Engine (s) C123 (gas), Bore: 3.125", Stroke: 4.000", Engines with water pump, 3.437" liner seal land inside diameter, Dome top pistons, Also works with C113 engine with water pump conversion, Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For flat top pistons use Item #: 106564, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130578) $448.00

Engine Parts
Camshaft Timing Gear - 66 teeth. For tractor models (100, 130, 140, 200, 230, 240, Super C all with 123 CID engine), (330, 340, 404 all with 135 CID engine), (424 with 146 CID engine), (444, 504 with 153 CID), (A, AV, B, BN, C, Super A, Super A1, Super AV, Super AV1 with 113 CID engine). Replaces 375712R1, 6779DB. (Item #: 111038, Ref: 375712R1) $92.00
Crankshaft Pulley - Crankshaft Pulley For A, B, C, Super A, Super C, 100, 130, 200, 230. Press fit. Not drilled/tapped for setscrew, (early tractors used a setscrew to retain pulley to crankshaft, customer would have to drill and tap this pulley). This pulley is balanced and has timing marks. Replaces: 251589R91, 6502DB, 6502DC, 6502DX (Item #: 100791, Ref: 6502DC) $72.00
No Picture Crankshaft, Remanufactured, 356308R - For International / Farmall tractor models C, Super C, 100, 130, 140, 200, Compatible with International Engine (s) C123, Replaces Casting number 356308R, 46402DC, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200228) $568.01
No Picture Cylinder Head, Remanufactured, 351649R - For International / Farmall tractor models 100, 130, 140, 200, 230, 240 (Gas), Replaces International Casting number 351649R, 261295R, 356587R, Casting No. 351649R, 261295R, 356587R, Engines 113, 124, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205487) $690.01
Governor Assembly - For A, Super A, B, C, Super C, 100, 130, 140, 200, 240, 330, 340, 404. OEM number 375778R11, 374710R1, 356746R91, 356745R91. Does NOT include housing. (Item #: 105375, Ref: R0612) $167.00
Governor Spring - This Governor Spring is used internally in the following tractors: A, AV, B, BN, Super A, Super A1, Super AV, Super AV1, 100, 130, 2404 (With C-113, C-123 or C-135 engines), 404. It replaces: 46944DA (Item #: 179295, Ref: 46944DA) $12.60
No Picture Governor Thrust Bearing Assembly - This 3 piece bearing assembly slides onto the governor assembly. For models cub, A, B, C, Super C, 560, Super AV, 184, AV, Bn, Cub Lo-Boy, Super A, 100, 130, 140, 154, 185, 200, 230, 240, 330, 340, 404, 424, 444, 460, 504. Also replaces 55314D. (Item #: 184444, Ref: 43481D) $52.00
Hand Starting Crank - For Super A, Super C, 100, 130, 200, ALL WITH C123 ENGINE. Hand Starting Crank with Spinner. Measures 16 3/4 inches to the first bend on the longest straight section. (Item #: 122096, Ref: 357750R11) $69.00
Pushrod - Fits A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, U2, U2A, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504 (all with C113, C123, C135, C146, C153 gas/LP engines) 10.762 inch length, 0.310 inch tube diameter . Replaces: 360213R91, 357548R1, 47386D, 47385D. (Item #: 182498, Ref: 47385D) $43.00
Ring Gear,Flywheel - For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 240. Gear has 90 teeth, 10.495 inch inside diameter and 11.435 inch outside diameter, .50 inches wide. (Item #: 103906, Ref: 55755DB) $32.50
Valve Guide - Valve guide for tractor models 100, 130, 140, 200, 22, 230, 240, (330, 340 serial number 100500 and before), 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super AV, Super C, (U2, U2A serial number less than 22113). Price shown is for each, sold only in multiples of 8 items. (Item #: 128646, Ref: 356583R21) $4.50
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. For tractor models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 serial number less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A serial number less than 22113), W4. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929. Sixteen required per engine. (Item #: 107088, Ref: 7HA6518) $0.60
No Picture Valve Service Kit - Cylinder HEAD Service KIT For 100, 200, A, AV, B, BN, C, Super AV, Super C, Super A. Contains: springs, guides, locks, (no valves). (Item #: 131579, Ref: VSKH113) $225.00
Valve Spring - Used on valves with length of 5-5/16 inch. For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super AV1, Super C, (U2, U2A serial number less than 22113), W4. 8 Used Per Tractor. Sold individually. (Item #: 128518, Ref: 24544DA) $3.30

Engine Pistons and Sleeves
Cylinder Kit - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 200, Compatible with International Engine (s) C113 (Gas, LPG), C123 (Gas, LPG), Replaces International OEM number 374493R93, 3.125" bore, Dome Top Piston, (Item #: 166745) $103.00
Pin Bushing - This Piston Wrist Pin Bushing Is used on 113 and 123 Gas and LP Engines. 0.909 inch I.D. 0.993 Inch O.D. 1.216 inch overall length. Pin Bushings require honing after installation. Replaces: 24415D, 64508D (Item #: 108092, Ref: 64508D) $10.00
No Picture Sleeve and Piston Kit - This Sleeve and Piston Kit is 3 1/4 inch overbore, stepped piston, 3.436 (3 7/16) inch lower sleeve diameter. Includes: sleeves, pistons, rings, O-rings, pins, and clips. For Super A, Super C, 100, 200 with C123 Gas Engine. (Item #: 184516, Ref: R2398) $578.00
No Picture Sleeve Assembly - C123 CID 4 cylinder gas engines with stepped head pistons. 3-7/16 inch outside diameter at seal area. For tractor models 100, 200, Super AV serial number 310300 and up, Super AV1 serial number 310300 and up, Super C. (Item #: 173469, Ref: SK275) $157.00
No Picture Sleeve Seals - For 1 cylinder. For tractor models 200, Super AV, Super AV1, Super C, 100 all with C123 engine. For tractor models 330, 340 both with C135 engine. (Item #: 128639, Ref: SRK701) $5.40

Engine Rings
No Picture Piston Ring Set - 3-1/8 inch bore, 8 compression rings at 3/32 inch, 4 oil rings at 1/4 inch. For tractor models 100, 130, 140, 200, 230, 240, Super C, (Super A, Super AV serial number 310300 and up). All with C123 gas engine. And for tractor models A, B, C, 130, 140, all with C113 CID with 3 1/8 inch overbore. (Item #: 130029, Ref: 2C7696) $123.00
Piston Ring Set - 3.125" Bore - Single Cylinder - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113 (gas), C123 (gas), Bore: 3.125", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome Compression, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - 3.125" Bore - 4 Cylinder use Item #: 174389, (Item #: 120878) $32.70
Piston Ring Set - 3.1875" Bore - 4 Cylinder - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240 (all gas), Compatible with International Engine (s) C113 (gas), C123 (gas), Bore: 3.1875", Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 128884) $114.00
Piston Ring Set - 3.1875" Bore - 4 Cylinder - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240 (all gas), Compatible with International Engine (s) C113 (gas), C123 (gas), Bore: 3.1875", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 129082) $218.00
Piston Ring Set - 3.25" Overbore - Single Cylinder - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113, C123, Overbore: 3.250", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", 2nd Groove Size: .094", 3rd Groove Size: .094", 4th Groove Size: .250", Sold per cylinder, (Item #: 120904) $23.00
Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113, C123, Bore: 3.125", Ring Size: Standard, Top Groove Size: .094", 2nd Groove Size: .094", 3rd Groove Size: .188", Sold per cylinder, (Item #: 120877) $19.20
Piston Ring Set - Standard - Single Cylinder Set - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240 (all gas), Compatible with International Engine (s) C113, C123, Bore Size: 3.125", Compression Rings per Piston: (3) - .125", Oil Rings per Piston: (1) - .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .125", 2nd Groove Style: Reverse Toesional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For Standard - Four Cylinder Piston Ring Set use Item #: 179775, (Item #: 129073) $32.30

Exhaust System
Exhaust Stack, Chrome, Curved - Double wall. Length 27 inches. For tractor models A, Super A, B, BN, C, Super C, 100, 130, 200, 230, 240, 340. Double wall, lined, 2 inch inlet I.D., 3 inch O.D., 24 inches tall plus 3 inch base. (Item #: 124222, Ref: R4449) $230.00
Exhaust Stack, Chrome, Straight - Double wall. Length 27 inches. Attaches with a standard exhaust pipe clamp, not included. For tractor models A, Super A, B, BN, C, Super C, 100, 130, 200, 230, 240, 340. (Item #: 124223, Ref: R4448) $210.01
Manifold, Intake/Exhaust - For tractor models A, B, C, Super A, Super C, 240, with C113 or C123 gas engines. Intake and exhaust. Replaces OEM# 251175R11, 251175R21. Gasket set available as part number 352014R1. Manifold Pipe available as R0056P. Please specify in comments if needed. (Item #: 101542, Ref: 251175R1) $89.00
Muffler - Vertical muffler for gas tractors. Inlet inside diameter 1-15/16 inch, outlet outside diameter 2 inch, length 29 inch, diameter 4-1/4 inch round body. Fits engines C113, C123, C135. For tractor models: A, AV, Super A, Super AV, B, BN, C, Super A-1, Super AV-1, 330, Super C, 100, 13 For 100, 130, 140, 200, 230, 240, 2404, 330, 340, 404, A, AV, B, BN, C, Super A-1, Super AV, Super AV-1, Super C, Super A. (Item #: 133340, Ref: 360720R91) $46.10
Muffler - Vertical muffler for gas tractors. Fits short clearance muffler for tobacco or grove application, engines: C113, C123, C135. Inlet inside diameter 1-15/16 inch, outlet inside diameter 2 inches, length 18 inches, diameter 4-1/4 inches, round body. For tractor models A, AV, Super A and AV, B and BN, C, Super For 100, 130, 140, 200, 230, 240, 2404, 330, 340, 404, A, AV, B, BN, C, Super A-1, Super AV, Super AV-1, Super C, Super A. (Item #: 178978, Ref: 360720TOB) $88.00
Muffler Clamp - Muffler clamp. For 100, 130, 140, 200, 230, 240, 340, 404, 424, 460, 504, 560, 606, 656, 660, 664, A, B, C, Super AV, Super C, Super A bad part (Item #: 180044, Ref: 48889DA) $13.50
Muffler - Restoration Quality - For International / Farmall tractor models 140, 240, 330, 340, 404, 424, 444, 504 Also fits Farmall: A, B, C, Super A, Super C, 100, 130, 200 and 230 if a larger diameter outlet is desired., Compatible with International Construction and industrial models T340, Compatible with International Hay Cutting (s) 201, Replaces International OEM number 360720R91, 381665R92, 403825R1, High Temperature Paint, Restoration Quality Muffler, IH Logo and part number are stamped into the side of the muffler, Inlet Length: 2-1/4", Inlet ID: 1-61/64", Shell Length: 16-1/2", Shell Diameter: 4-1/4", Outlet Length: 10", Outlet OD: 1-25/32", Overall Length: 28-3/4", (Item #: 164534) $63.00
Muffler - Restoration Quality - For International / Farmall tractor models 140, 240, 330, 340, 404, 424, 444, 504 Also fits Farmall: A, B, C, Super A, Super C, 100, 130, 200 and 230 if a larger diameter outlet is desired., Compatible with International Construction and industrial models T340, Compatible with International Hay Cutting (s) 201, Replaces International OEM number 360720R91, 381665R92, 403825R1, Polished Stainless Steel, Restoration Quality muffler, IH Logo and part number are stamped into the side of the muffler, Inlet Length: 2-1/4", Inlet ID: 1-61/64", Shell Length: 16-1/2", Shell Diameter: 4-1/4', Outlet Length: 10", Outlet OD: 1-25/32", Overall Length: 28-3/4", (Item #: 164535) $150.00
Vertical Muffler - This stainless steel vertical muffler fits the following tractors models: A, AV, B, BN, C, Super A, Super C, 100, 130, 200, and 230. It also replaces the OEM part number 360720R91. The inlet length is 2 1/4 inches and the inlet inside diameter is 2 inches. The outlet length is 10 inches and the outlet outside diameter is 1 3/8 inches. The shell length is 16 1/2 inches and shell diameter is 4 1/4 inches. (Item #: 164533, Ref: 48832DB) $156.00

Fuel System / Air Intake
Air Cleaner Cap - This Air Cleaner Cap is used with either Donaldson or United Specialties air cleaners found on some of the following tractors C, Super A, Super A-1, Super C, 100, 130, 140, 200, 230, 240, 340. Used with vertical air intake through hood. Fits outside of the pipe. 1.75 Inch Inside Diameter, 4.25 Inch Body Outside Diameter. Replaces: 351189R91, 351190R91, 361723R91 (Item #: 111657, Ref: 351189R91) $40.00
Air Cleaner Cap - For tractor models: Super A from serial number 356001, C, Super C, 100, 130, 140, 200, 230, 240, 330, 340. Air cleaner cap 1 5/8 inch outside diameter. (Item #: 111662, Ref: 361723R91) $40.00
Carburetor - Zenith carburetor outperforms the original carbs used on: A, Super A, Super C, AV, B, 100, 130, 140, 200, 230, 240. New Zenith replaces Marvel TSX157, Carter UT7335. Center-to-center on the two mounting bolt 2 3/8 inches. Unlike many of the new Zenith replacements, the linkage is NOT reversible. The 14007 carburetor also replaces the following carburetors in some applications, 10386, 10522, 11115, 11188, 11340, 11704, 12115, 12122, 12285, 12613, 14007, 251182R92, 352047R91, 352377R92, 354184R93, 354185R92, 354892R93, 355485R91, 355485R92, 356901R91, 356902R92, 362384R91, 362385R91, 362984R91, 366306R9, 366306R91, 366306R93, 366462R94, 372095R91, 372098R93, 373957R91, 373959R91, 373961R91, 373962R91, 373978R91, 375560R91, 377600R91, 385507R91, 385608R91, 48616D, 52499DA, 69401D, 8928, 9167, IHS905, R0222, and 17A61. Made in USA, 1 year warranty. (Item #: 104184, Ref: 14007) $360.00
Carburetor Elbow and Strainer - This Carburetor Elbow with strainer assembly is for 1/4 inch O.D. fuel line. 1/8 inch male threads. The screen is 3/4 inch long. The pipe measures 1/8 inch by 1/4 inch compression. Used on Carter, Marvel Schebler and Zenith carbs using 1/4 inch O.D. fuel line. Verify measurements before ordering. Most Farmall / IH models are equipped with 5/16 inch O.D. line and require part number 9N9553. For tractor models A, B, C, Super C, Cub Lo-Boy 184, T340, T5, Super A, 100, 130, 140, Cub Lo-Boy 154, Cub Lo-Boy 185, 200, 230, 240, 330, 340, 404, 444, 504. (Item #: 113656, Ref: C150-17) $29.30
Carburetor Elbow with strainer assembly - This carburetor elbow with strainer assembly fits the models equipped with a 5/16 inch O.D. fuel line. 1/8 inch male threads. Fits Carter, Marvel Schebler and Zenith carburetors. Replaces 354827R91, 53796D, 67-528, 69938D (Item #: 113655, Ref: 354827R91) $34.10
Carburetor Float - This carburetor float is 2.25 inches wide and is used for the following tractor models: 100, 130, 140, 200, 230, 240, 330, 340, 404, A, B, C, Cub, Lo-Boy 184, Super A, and Super C all using Zenith carburetor models: 11340, 11704, 11340, 11704, 12122, 12613, 12632, 12911, 12115, 12285, 12342, 12225, 8928, 9749, 9167, 9752, 11188, 10514, 10498, 10386, 10441, 13794, 13781, 10522, 11115, 11338, 11339, and 14007. (Item #: 108454, Ref: CTP28) $16.20
Carburetor Float - Fits Carter number UT27015, UT2223S, UT2418S, UT923S with Cast Iron Throttle Body, Carter number 21-121S. For tractor models 100, 130, 200, 230, 240, Super A, C, Super C, AV. (Item #: 122654, Ref: 354813R91) $36.70
Carburetor Gasket Set - 5-piece gasket kit is for small bowl Marvel Schebler carburetors. The overall length of the bowl gasket is 4-5/16 inch A, B, C, Super C, Super AV, Super AV-1, AV, BN, T340, T5, Super A, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, A1 with the following carburetors: TSX114, TSX156, TSX157, TSX159, TSX171, TSX198, TSX253, TSX319, TSX333, TSX338, TSX347, TSX348, TSX422, TSX44, TSX597, TSX635, TSX663, TSX696, TSX730, TSX744, TSX748, TSX827, TSX896, TSX896SL, TSX926, TSX930, TSX936, TSX94, TSX948, TSX949, TSXU828, TSXU829, TSXU831, TSXU832, TSXU834 (Item #: 182465, Ref: 9N9502) $4.20
Carburetor Kit, Basic - Kit for Zenith 11340, 11704, 11115, 11338, 11339 carbs on 100, 130, 200, 230, 240, C, Super A, Super C. (Item #: 100739, Ref: Z102) $35.10
Carburetor Kit, Basic - This Carburetor Kit is used on UT2701S, UT2702S, UT2703S, UT2705S, UT2706S, UT2703 with Aluminum Throttle Body. Includes Gasket, Needle, Seat, and Throttle Shaft. (Item #: 184712, Ref: R6873) $31.50
Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 12566B, 13876, 12522, 12522B, 13878, 13877, 14007, 13794, 13794B, and OEM 375560R91. (Item #: 183586, Ref: BK44V) $28.30
Carburetor Kit, Basic - For tractor models Super A, Super C with Zenith 11115, 11188, 11338, 11339, 11340, 11704. Basic Carburetor Kit. (Item #: 182777, Ref: BK9BV) $34.40
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 12613A, 10514 (C113, C123 Engine). For the following tractor models: A, B, C, Super C, 100, 130, 140, 200, 230. Center-to-Center on the mounting bolts is 2 3/8 inches. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203309, Ref: 1405-CARB) $235.01
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 10522, 11115, 11338, 11339, 11704, 14007. For the following tractor models: Super A, Super C, 100, 130, 140. Center-to-Center on the mounting bolts is 2 3/8 inches. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203305, Ref: 1408-CARB) $235.01
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 12911, 12122. For the following tractor models: Super C, 100, 130, 140, 200, 230. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203312, Ref: 1409-CARB) $235.01
Carburetor Repair Kit - This Carburetor Kit is used on Carter Carburetors with Cast Iron throttle bodies O-653. Used on Farmall C, Super A (sn 255418 and up), Super C, 100, 130, 200, 230 (w/ #UT733S and UT734S w/ cast iron upper bodies); Replaces: 76769R1 Fits Carter Carburetors: UT27015, UT652, UT733S, UT734S, UT771A, UT771S, UT795S, UT925A, UT925S, Fits Carter Carburetors Cast Iron Throttle Body. (Item #: 111604, Ref: BK200V) $22.80
Choke Rod - For tractor models Super A, C, Super C, 100, 130. Choke Rod. Replaces 350744R1 (Item #: 126113, Ref: 50633R3) $27.00
Fuel Cap - For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1/2 inches tall, Triple Baffle Style. Replaces 361910R1, 23995DC (Item #: 108051, Ref: R3654) $26.00
Fuel Cap, Chrome, Unvented - Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Item #: 107987, Ref: 23995DC-CHROME) $2.60
Fuel Cap, Vented - For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Item #: 107951, Ref: 23995DA) $12.80
Fuel Line - Pipe, fuel strainer to carburetor with two nuts. For tractor models Super A and AV SN# 356001 and up, Super C, 100, 200. This fuel line is used when tractors are equipped with 5/16 inch fuel fittings. Verify before ordering. (Item #: 172869, Ref: 356355R11) $30.10
Fuel Line With fittings - Buna-N flex gas line. Buna -N gas lines easily flex, eliminates metal tubing, vibration. For 100, 130, 200, 230, A, B, C, Super C, Super A. Replaces 350623R1, 350623R11, 369993R11. (Item #: 112540, Ref: FLA15) $22.30
Fuel Pipe Coupling Nut - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, F12, F14, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, Super A, Super C, Super H, Super M, Super W4, TD6, TD9, W4, W6, W12, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 686, 706, 756, 806, 826, 856, 2444, 3514, 3616, Compatible with International Combine (s) 303, 403, 503, 615, 715, Replaces International OEM number 29899D, 700155R11, 700153R11, 1/2"-20 Hi-duty tube fitting, 5/16" O.D., (Item #: 112642) $3.47
Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00
Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 13193D. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60
Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces A11209 and 357958R1. Will fit the following modelsusing/ 1.280 inch long glass bowl: A, Super A, Super A-1, Super AV, Super AV-1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, Hydro 100, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 454, 460, 464, 504, 544, 574, 606, 656, 656, 674, 706, 756, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1566. Replaces A11209 and 357958R1. (Item #: 105382, Ref: 9N9162) $3.20
Precleaner Assembly - Complete, glass dust bowl assembly, 1-3/4 inch inside diameter base, just like the original. For tractor models Super A (serial number 356001 and up), Super A-1, C, Super C, 100, 130, 140, 200, 230, 240, 340. (Item #: 115805) $66.08
Precleaner Assembly - Complete, glass dust bowl assembly, 1- 3/4 inch inside diameter base, just like the original. For tractor models A, Cub, B, Super A, 100, 130, 140, Super C, 200, 230, 240, 340. Replaces: 352612R91. (Item #: 115805, Ref: 352612R9) $66.08
Precleaner Bowl - Glass bowl for pre-cleaner assembly 335261R91, 356254R91. (Just like the original). Tractors: Super A (serial number 356001 and up), Super A-1, C, Super C, 100. 130, 140, 200, 230, 240, 340, A, Cub, B, Super A (up to serial number 355669). (Item #: 115866, Ref: 64178D) $9.00
Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet Includes a 5/16" line compression adapter fitting. For Cub, Cub Lo-Boy, A, B, Super A, AV AI, AV1, C, Super C, 100, 130, 140, 154, 184, 185, 184 Cub, Cub 185 Lo-Boy, 200, 230, 2400A, 2404, 2500A, 2504, 2606, 2656, 340, 404, 454, 460, 464, 504, 574, 606, 656, 674, 884. Fuel Strainer Assembly with 3/8 inch pipe connection to tank, 1/8 inch pipe outlet. Replaces Replaces: 354222R91, 355142R91, 369988R91, 38465D, 51066DC, 61782C91. (Item #: 105370, Ref: 61782C91) $16.00
Sediment Bowl Assembly, Dual Tank - For tractors using two tanks. 3/8 inch pipe inlet, 5/16 inch compression outlets x 2. For tractor models A, B, BN, C, I4, I6, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, (H, HV serial number 50866 and up), (M serial number 24215 and up), (MV serial number 24215 and up), (O4, W4 serial number 1130 and up), (O6 serial number 1317 and up), (W6 serial number 1317 and up) with Distillate or All Fuel. Replaces 370831R91, 51495DD, 58361DAX, IHS713. YOU MAY NEED A 90 DEGREE ELBOW - NOT SUPPLIED BY YESTERDAYS TRACTOR. (Item #: 113653, Ref: 17215DA) $70.00
Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: O12, O14, O4, O6, OS4, OS6, T340, T5, T6 (up to serial number 29964), W12, W14, W30, Super W4, W4, W40, Super W6, Super W6TA, W6, Super W9, W9, WR9S, F12, F14, F20, F30, 100, 130, 140, 200, 230, 300, 340, 350, 400, W400, 450, W450, 460, 560, 656, 660, 706, 756, 766, 806, 826, 856. Replaces 51344VA and 357957R1. (Item #: 105365, Ref: S.65504) $6.10
Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D (Item #: 105364, Ref: 49923D) $3.50
Sediment Bowl Screen - For International / Farmall tractor models A, B, C, Cub Lo-Boy, Super A, Super C, 100, 130, 140, 240, 340, 454, 460, 464, 504, 574, 606, 656, 674, 686, 2400A, 2404, 2500A, 2504, 2606, 2656, Compatible with International Hay Cutting (s) 201, 210, 230, 275, 375, 4000, 5000, 5500, Replaces International OEM number 49923D, Diameter: 2", Diameter Hole: 1/4", For Sediment Bowl Assembly use Item #: 105370, (Item #: 105371) $3.00
Throttle Control Assembly - For tractor models Super A, 100, 130, 140. Throttle Control Assembly. Replaces IHS539. (Item #: 128089, Ref: 350610R11) $70.72
Throttle Lever - Lever Only For 350610R11 assembly. For tractor models Super A, 100, 130. Replaces 350612R2 (Item #: 185245, Ref: R4192) $23.30
Throttle Shaft - For International / Farmall tractor models Super A, Super C, 100, 130, 200, 230, Replaces International OEM number 354805R92, 354805R91, For Carter carburetor with cast top, (Item #: 122655) $22.90
No Picture Throttle Spring - For tractor models A, Super A, B, BN, 100, 130. (Item #: 180014, Ref: 43650D) $5.10