Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case VAC - Featured Tractor

The Case VAC model tractor was produced in 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955 and 1956 by the J.I. Case company in Racine, Wisconsin. It has a 124 ci engine rated at 28 horsepower.

Recent Topics

  • vac rock shaft - I have the VAC in the garage giving it a spruce up over winter as Case will be the featured tractor at the Platte Co steam and tractor show this summer (MO). I have a grease zerk (hey a word the computer doesn't know how to spell) on each side of the rock shaft. I now notice on the right side (facing forward) there is another hole about 2 or 3 down from the zerk on that side. Is there supposed to be another zerk there, or is it a plug of some kind? Just wondering. Thanks all.
  • vac manifold nuts - To update a previous post: I got my brass nuts off my manifold bolts with our rounding or ruining any. I took a cap off a spray paint can and filled the outside ring with PB Blaster. I stuck the studs head down in it and left it set a few days. The PB made the brass look semi-new again. I also found it probably wasn't necessary. As someone said in a previous post, the brass nuts were so they wouldn't weld to the studs. The reason the studs turn out is because corrosion at the end o ...
  • vac stuff - doing a valve job on my 51 vac new style. The manifod studs turned out with the brass nuts frozen.I don't understand the brass thing. Do I need to seperate them. Were they intended to lock on, since they seem to not have lock washers? Also I am not happy with how close the muffler is to the hood. I thought of putting a short extension so the muffler would be a little higher but 1-15/16 size seems impossible to find. Open to any ideas on mufflers.
  • Case VAC head thickness - I have read on this site where a VAC head (later model) can be shaved to .150. I was thinking on shaving mine when doing my head. I know the routine of putting putty in and retightening the head to show i have clearance, but it would save a step if anybody knows the thickness of the head from the base to the ridge where the valve cover sits on. I would appreciate that info. Thanks to anyone who can provide it.
  • Late Vac Steering--again! - There have been numerous posts over the years about taking up slop in the steering gear box on 51 and later VAcs. It has been a while, but one post said the bearing was no longer available. One from an H JD might fit as well as one from 30's Chevys. I just got my new Hemmings Classic Cars and new parts lists The Filling Station 800-841-6622 having bearing sets for 1923-40 Chevy's. Some one more knowledgeable than me would have to weigh in as to if these are the right bearings. They do not ...

  • Archived Ads for Case VAC Tractors
    (Information only, no longer for sale)

    Looking for an air cleaner cup for my Case VAC tractor. Part VT-3825 My phone only works if Im standing in the right place outside, so please leave a message or text. E-mails are best for me. Thanks Posted 2020-06-26 in Pearl City IL.

    I have a pair of rear Case tractor weights for sale. VT29 and the eagle on the globe or on these weights. I believe they fit VAC and other models. 7 1/2 inch inside and 17 inch outside diameter.125# a piece. 250.00 for the pair. Central Iowa location. Condition: Good, Price: 250.00, Posted 2020-07-04 in Dana IA.

    Marvel-Schebler carburetor for Case VAC tractor. Requires rebuild, good castings Condition: for rebuild , Price: 35, Posted 2020-08-03 in WI.

    Case VAC tractor instruction manual. Good condition collectible original book. US flat rate 4 shipping thanks Price: 35, Posted 2020-08-03 in WI.

    Wanted, a good Marvel Schebler Carburator for a VAC Case tractor. must be good enought to use Condition: good, Price: 75-100, Posted 2020-10-21 in nancy KY.

    Important: Yesterday's Tractor Co. takes no responsibility for the accuracy, validity or availability of the items listed here nor do they receive any profit from the 3rd party transactions that may transpire from the use of this website. Yesterday's Tractor Co. does not sell tractors, nor do we collect money or broker transactions for others.

    Our Most Popular Case VAC Parts

    (Click here to see all parts available)

    Case VAC Cooling System

    Fan Belt - This Fan Belt measures 40.50 inches by 13/16 inches For tractor models V, VA, VAC, VC all without ge[...] 119093 ... $17.16
    VAC Water Pump
    Water Pump - Less Pulley. Has 2-3/4" impeller diameter. For tractor models 200 gas, 200B 1959 and later, 300, 300[...] 104193 ... $55.60

    Case VAC Decals and Emblems

    VAC Decal Set
    Decal Set - For the VAC. Give your VAC a new look with this set of 15 self adhesive decals. Includes two Case ea[...] 100411 ... $46.00

    Case VAC Electrical System

    VAC Distributor Cap, Autolite or Prestolite
    Distributor Cap, Autolite or Prestolite - This cap fits Autolite or Prestolite distributors ONLY, with 3-3/8 inch outside diameter, clip held [...] 105575 ... $17.00
    VAC Electronic Ignition Conversion Kit, 12V Negative Ground
    Electronic Ignition Conversion Kit, 12V Negative Ground - 12 Volt NEGATIVE Ground. (Also available in 12 Volt POSITIVE, 6 Volt NEGATIVE and 6 Volt POSITIVE - [...] 105088 ... $134.00
    VAC Ignition Kit, Autolite Distributors
    Ignition Kit, Autolite Distributors - Kit contains Points, condenser, Rotor. Used with Autolite distributors ONLY, with 3-3/8 inch outside[...] 105290 ... $18.00
    VAC Starter Drive
    Starter Drive - Fits Case V, VA, VAC Replaces OEM# MZ4072, MZ4114[...] 107059 ... $40.00
    VAC Starter Switch
    Starter Switch - Fits the following series: D, DC, L, R, V, VC. Replaces: O4981AB, VT3588[...] 105684 ... $15.00

    Case VAC Engine Gaskets

    VAC Head Gasket Set
    Head Gasket Set - For 124 CID Gas Engine on VA Series: (VA, VAC, VAE, VAH, VAI, VAO, VAS) 1951-1954. (Upper gasket set[...] 106073 ... $91.37

    Case VAC Exhaust System

    VAC Exhaust Elbow
    Exhaust Elbow - For tractor models VA, VAC, VAH with Continental Engine. 3 Inch Offset. Replaces OEM# VT200 (To ES #[...] 101496 ... $52.65
    VAC Muffler, Vertical
    Muffler, Vertical - Inlet I.D. 1-15/16 inch (C) Outlet O.D. 2 inch (B) Overall length 29 inch Shell O.D. 3.25 inch. For [...] 100262 ... $31.00

    Case VAC Fuel System / Air Intake

    Air Cleaner Cap - Fits Avery A, Case VA, VAC, VAI, VAO and VAH, INDUSTRIALS - 310, 310C, 310D, 310E, 310F, 320, 400B, [...] 126366 ... $60.58
    Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: VA series 19[...] 100747 ... $450.00
    Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: S, VA series[...] 100751 ... $470.00
    VAC Carburetor Float
    Carburetor Float - This carburetor float is 2.25 inches wide and is used for the following is used for the following tr[...] 108454 ... $18.00
    VAC Carburetor Kit, Basic
    Carburetor Kit, Basic - Kit for Marvel TSX635, TSX937SL, TSX937, TSX957SL, TSX804, TSX680, TSX936SL, TSX936, TSX42, TSX74, T[...] 100733 ... $20.00
    VAC Carburetor Kit, Basic
    Carburetor Kit, Basic - Kit for Zenith 10136, 7206, 9667, 11506, 11106 carbs used on D, R, RC, S, S80SK, SC, SE, SI, SO, STW[...] 100738 ... $22.00
    VAC Carburetor Kit, Basic
    Carburetor Kit, Basic - Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For tractor models V[...] 186565 ... $39.01
    VAC Carburetor Kit, Basic
    Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 16[...] 183586 ... $26.00
    VAC Fuel Cap
    Fuel Cap - Cap also doubles on many models as a radiator cap. For tractor models V, VA, VAC. Replaces G13271. M[...] 154962 ... $16.77
    Sediment Bowl Assembly - For tractor models D, S, VA, VAC. Sediment Bowl Assembly - Small Bowl. Replaces 03990AB. May look sl[...] 105362 ... $19.00

    Case VAC Gauges

    VAC Oil Pressure Gauge
    Oil Pressure Gauge - For tractor models V, VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAH, VAI, VAIW, VAIW-3, VAO, VAO-15, [...] 121649 ... $41.00
    VAC Water Temperature Gauge
    Water Temperature Gauge - This water temperature gauge comes with a 60 inch lead for models DC, SC, VAC. Water Temp Gauge with[...] 100295 ... $29.26

    Case VAC Lights

    VAC Light Switch
    Light Switch - light switch with cut out on generator for tractor models VA, VAC, VAH, VAI, VAO. Replaces VTA463[...] 105312 ... $18.00

    Case VAC Oil System

    VAC Oil Filter
    Oil Filter - For tractor models VA, VAC, VAI, VAO, VAS, 200, 300, 301, 310, 311, 350D, 400, 500, 600 series with [...] 110866 ... $27.26

    Case VAC Seats

    Seat Spring - This Seat Spring is used on VAC when equipped with optional easy ride seat. It Replaces original par[...] 105356 ... $36.00

    Case VAC Steering

    VAC Steering Wheel
    Steering Wheel - This Steering Wheel measures 16 inch diameter, 7/8 inch to 1 inch tapered keyed hub, 3 steel spokes [...] 101414 ... $39.10

    Click here to see our full catalog of Case VAC Parts

    We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

    Home  |  Forums

    Today's Featured Article - Talk of the Town: Trailerin a Tractor, Chains or Straps? - by Staff. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: " I bought a trailer and plan to take my CASE VAS to some shows. I don't yet have anything to secure it to the trailer. So which is better to buy and use; the ratchet-type straps or binders and binder chains? ... [Read Article]

    Latest Ad: John Deere 420 W 1956 with full hydraulic Superior loader.. power steering, direction reverser, touch o magic,3 point, Pto.. Great sheet metal. Runs no smoke. May be a original yellow from factory.Decent tires. [More Ads]

    Copyright © 1997-2022 Yesterday's Tractor Co.

    All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

    TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

    Yesterday's Tractors - Antique Tractor Headquarters

    Website Accessibility Policy