FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers D12 Tractor Parts

[Categories] [All Allis Chalmers Models] [Print]

Belts

Belt - Fan - For Allis Chalmers tractor models D10 (With fixed water pump pulley), D12 (With fixed water pump pulley), D15, Replaces Allis Chalmers OEM number 70233432, Type: Automotive, Length: 38.625", Width: 0.453", Material: Polyester Cord, Thickness: .551", (Item #: 164010) $9.40

Brakes

Brake Drum - For tractor models G, D-10, D-12, D-14, D-15. Dimensions: 1.375 bore, 4.250 wide, 7.548 diameter. (Item #: 105406, Ref: 70239542) $55.00

Brake Lining - For tractor models G, D-10, D-12, D-14, (D-15 to serial number 9001). NOTE: QTY of 1 includes 2 linings and rivets. Enough to service 1 brake. Replaces OEM number 70230874. (Item #: 105402, Ref: 70277309) $27.40

No
Picture
Brake Lining Kit - Set of 2 brake shoe linings with rivets for one wheel. For D10, D12, D14, D15 (Item #: 105402, Ref: 70230874) $27.40

Brake Pedal Return Spring - Brake/Clutch Pedal Return Spring is 4.590 inches overall length. 2 used per tractor for brake pedal, 1 used for D21 clutch pedal return spring. Fits: (D10, D12, D14, D15 Brake Pedal Return Spring), D21 (Clutch Pedal Return Spring); Replaces: 227700, 239262, 70227700, 70239262. (Item #: 125745, Ref: 70239262) $14.80

Brake Shoe Return Spring - For tractor models D10, D12, D14, D15. (Item #: 125767, Ref: 70228253) $15.30

Brake Shoes - Bonded Shoes. Includes 1 pair for 1 wheel. Also replaces 230872 and 800487. For tractor models G, D, D12, D14, (D15 up to serial number 9001). Replaces: 70800487, 70230872, 70276661, 228859, 230872, 800487. (Item #: 125730, Ref: 228859) $112.00

Clutch

Clutch Disc - For Allis Chalmers tractor models B (s/n B-7133-earlier), D10, D12, D14, D15, Compatible with Allis Chalmers Construction and industrial models HD3, Replaces Allis Chalmers OEM number 70207784, 70230099, 70231976, 70232239, 70236105, 70236120, 70236122, 70247744, 70253187, Clutch Diameter: 9", Clutch Hub Diameter: 1-1/8", Clutch Splines: 10, Clutch Center: Spring, Clutch Type: Woven, (Item #: 119399) $122.00

Clutch Disc, 9 Inch - This clutch disc has 1-1/8 hub, 10 spline. For tractor models B, C, CA, (D10 up to serial number 3500), (D12 up to serial number 3000), D14, D15. This is not interchangeable with A44512 as the hub is different. (Item #: 172922, Ref: 70232239) $121.00

Clutch Disc, 9 inch Organic - Clutch disc is 9 inches in diameter with 10 splines on a 1 1/8 inch hub. Replaces 207784 and 70207784. For models B, C, CA, D10, D12, D14, D15, H3, HD3, I400, I600 and IB. This part is not interchangeable with 70232239 as the hubs are different. (Item #: 119397, Ref: A44512) $60.00

Clutch Disc, Remanufactured - For Allis Chalmers tractor models D10, D12, D14, D15, Compatible with Allis Chalmers Construction and industrial models HD3, I40, I60, I600, 615, Clutch Size: 9", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206306) $90.01

Clutch Disc, Remanufactured, 70207784 - For Allis Chalmers tractor models B, C, CA, D10 (s/n 3501 - earlier), D12 (s/n 3001 - earlier), D14, D15, Compatible with Allis Chalmers Construction and industrial models HD3, Replaces Allis Chalmers OEM number 70207784, 70230099, 70231976, 70232239, 70236105, 70236120, 70236122, 70247744, 70253187, Clutch Size: 9", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 204569) $133.00

Clutch Disc, Remanufactured, 70237137 - For Allis Chalmers tractor models D10 (s/n 3501 - later), D12 (s/n 3001 - later), Compatible with Allis Chalmers Construction and industrial models I40, I60, I600, Replaces Allis Chalmers OEM number 70237137, 70246660, 70248239, Clutch Size: 9", Clutch Hub: 1-1/4", Clutch Spline: 24, Clutch Center: Spring, Clutch Type: Woven, (Item #: 206307) $117.00

Clutch Inspection Plate - Fits B, C, CA, IB, D10, D12, D17, D19, WC, WF, 160, 170, 175. (Item #: 126139, Ref: 208465) $20.00

Clutch Kit - Kit includes 9 inch clutch disc (10 spline 1 1/8 inch hub) 70207784, pressure plate 70216965, release bearing 70235079, alignment tool and pilot bearing 6203-2RS. Used on B, C, CA, D10, D12, D14, HD3 Crawler, HD4 Crawler. (Item #: 119875, Ref: 1612-1008) $165.00

Clutch Kit, Remanufactured - For Allis Chalmers tractor models D10 (S/N 3500-earlier), D12 (S/N 3000-earlier), D14, D15, Clutch Diameter - 9", Clutch Hub Diameter - 1-1/8", Clutch Splines - 10, Clutch Center - Solid, Clutch Type - Woven, Pressure Plate Size - 9", Pressure Plate Levers - 3, Pressure Plate Springs - 6, Pressure Plate Type - Single Stage, Pilot bushing not included, (Item #: 202035) $259.50

Clutch Kit, Remanufactured - For Allis Chalmers tractor models D10 (S/N 3501-later), D12 (S/N 3001-later), Clutch Diameter - 9", Clutch Hub Diameter - 1-1/4", Clutch Splines - 24, Clutch Center - Spring, Clutch Type - Woven, Pressure Plate Size - 9", Pressure Plate Levers - 3, Pressure Plate Springs - 6, Pressure Plate Type - Single Stage, Pilot bushing not included, (Item #: 202036) $270.00

Clutch Pedal Return Spring - This Clutch Pedal Return Spring. Fits Allis Chalmers B (serial number 124037 and up), CA (serial number 30611 and up), D10, D12 (up to serial number 9001), IB (serail number 2836 and up). It replaces original part numbers 226310 and 70226310. It measures 5.573 inch overall length, 0.100 inch wire diameter, 0.750 inch body diameter. (Item #: 182939, Ref: 70226310) $16.50

Clutch Pilot Bushing - Inside diameter .883 inch, outside diameter 1.125 inch, thickness .995 inch. For the following models: B, IB, C, CA, D10 (up to serial number 3501), D12 (up to serial number 3001), D14, D15, and H3. Replaces 206968, 228188, 228255, 70206968, 70228188, 70228255. (Item #: 122000, Ref: 364527R91) $9.30

Clutch Release Throw Out Bearing - Greaseable - Compatible with Allis Chalmers Construction & Industrial(s) HD3, HD4. Compatible with Allis Chalmers Tractor(s) B, C, CA, D10, D12, D14, D15, D17, D19, 180, 185, 190, 190XT, 200. Replaces Allis Chalmers OEM nos 70235079 (Item #: 113482) $19.10

Pressure Plate - 9 inch diameter. For tractor models D10 and D12 serial number 3502 and up, D14, D15, (H3 with 149 engine), HD3. (Item #: 118719, Ref: 70247745) $93.00

Pressure Plate, 9 Inch - Rockford Style. For tractor models B, C, CA, D10 serial number less than 3501, D12 serial number less than 3001, WF. (Item #: 118719, Ref: 70228926) $93.00

Pressure Plate Assembly, Remanufactured, 70216965 - For Allis Chalmers tractor models B (s/n B-7133-earlier), C, CA, D10 (s/n 3501 - earlier), D12 (s/n 3001 - earlier), D14, D15, Compatible with Allis Chalmers Construction and industrial models HD3, Replaces Allis Chalmers OEM number 70216965, 70228926, 70247745, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 118719, (Item #: 206372) $117.00

Release bearing - For tractor models 180, 185, 190, 190XT, 200, C, CA, D10 (serial number 3501 and below), D12 (serial number 3001 and below), D14, D15, D17 (serial number 75000 and below), D19, H3 (with 149 engine). Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces: 211273, 235079, 70211273, 70235079. (Item #: 107007, Ref: N1087) $21.00

Release Bearing - For tractors: B, IB, WC, WF, WD, WD45, WD45D, D10 (serial number 3501 and up), D12 (serial number 3001 and up), D17 (prior to serial number 75000), D19. Measures inside Diameter 2.062 inches and Outside Diameter 3.375 inches.Replaces 70204829 (Item #: 100022, Ref: 361292R91) $25.70

Cooling System

Fan Belt - This Fan Belt measures 36.562 inches length and 0.656 inch width, for the B, IB, C, CA, D10 up to serial number 3501, D12 up to serial number 3001 and D14. Also Replaces 209656. Please verify measurements before ordering (Item #: 117363, Ref: 70209656) $13.80

Lower Water Pipe - This Lower Water Pipe (also known as Elbow Assembly, J-Tube, Lower Radiator Tube or Pipe) is used on Allis Chalmers Gas and LP models: D10, D12, D14, D15. It has a 1-1/4 inch Outside Diameter. It is 10 inches long measured along curvature. Steel Construction. It uses two 70207173 radiator hoses for attachment (not included). Replaces: 228126, 228511, 233431, 70233431. (Item #: 179678, Ref: 233431) $42.80

Radiator - Pressurized. For tractor models B, C, CA, D10 and D12 - VERIFY OEM PART NUMBER. Core is 15 inches wide x 14.2 inches high. Also replaces 70233232, 7023313 and 70233290. (Item #: 101663, Ref: 70214337) $205.00

Radiator Cap - Allis Chalmers, 228545, 228722, A39359, A45176, G45179 - For Allis Chalmers tractor models B (s/n 61221-later), C (s/n 18580-later), CA, D10, D12, D14, D15, D17, D19, D21, G, WC (s/n 74430-later), WD, WD45, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, Compatible with Allis Chalmers Construction and industrial models H3, HD3, I40, I60, I400, I600 Replaces Allis Chalmers OEM number 70228545, 70228722, 70228817, 70254891, , Compatible with Case Construction and industrial models W3, 210B, 310, 320, 430, 430CK, 480, 480B, 480C, 480CK, 530, 530CK, 545, 580, 580B, 580BCK, 580C, 580CK, 584, 584C, 585, 585C, 586, 586C, Replaces Case OEM number A39359, A45176, G45179, Chrome Plated, 2.239" Inner cap I.D, 2.895" Outer cap shell O.D., 0.582" Tang width, 1.485" I.D. sealing area, 4 PSI (for pressurized systems), (Item #: 113099) $27.00

Radiator Cap, Pressurized - This 4 pound pressurized cap is for tractor models using a pressurized cap: Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 70228545, 70228722, 70228817, 70254891. (Item #: 110011, Ref: 70254891) $7.00

Radiator Hose, Lower - Inside diameter 1.250 inch. For tractor models B, C, CA, D10, D12, D14. (Item #: 108009, Ref: 70207173) $3.00

Radiator Hose, Upper - Our new upper radiator hose has an inside diameter of 1.203 inches. For tractor models D10, D12. (Item #: 159537, Ref: 70231965) $11.10

Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: B with engine serial number 126210 and up, when equipped with water manifold bypass. Models: C and CA with engine serial number 195136 and up, when equipped with water manifold bypass. Models: D10, D12, D14, D15, D17, I40, I400, I60, I600, WD45, 170, and 175 gas or LP. This thermostat does not come with a gasket. Replaces part numbers 226505, 229927 70229927. (Item #: 110010, Ref: R1852) $38.50

Thermostat, 160 Degrees - This is a 160-degree thermostat. Used on Allis Chalmers B with engine serial number 126210 and up, using 4 bolt thermostat housing, C with engine serial number 60157 and up, using 4 bolt thermostat housing, CA with engine serial number 195136 and up, using 4 bolt thermostat housing, D10 Gas, D12 Gas, D14 Gas, D15 Gas, D17 Gas, WD45 Gas, I400 Gas, I60 Gas, I600 Gas, 170 Gas, 175 Gas, H3 Gas. Replaces 1002521M91, 185201M2, 226372, 228543, 70226372, 70228543, 830873M93, A11493, A28114, TG10608 (Item #: 150677, Ref: 226372) $24.00

Water Pump - For D10, D12, D15, 160 all with Gas engine. Water Pump with pulley. Replaces part numbers 233394, 233395, 9003711, 79004256, 9003711, 9004256 with fixed case iron pulley. (Item #: 122020, Ref: 79004256) $130.00

Water Pump Gasket - This is the backing plate to block gasket used with 79016821 water pump. It replaces 70207820, 70207001 (Item #: 153391, Ref: 70234382) $5.10

Water Pump Gasket - Pump to Plate - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, Compatible with Allis Chalmers Construction and industrial models HD3, Replaces Allis Chalmers OEM number 70207832, Pump to Plate, (Item #: 153390) $6.90

Water Pump Gasket Pump to Plate - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70210830, Pump to Plate, For water pump use 104189, (Item #: 153401) $0.98

Water Pump, Remanufactured, 70226497, A105181 - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, IB, Compatible with Allis Chalmers Construction and industrial models HD3, Replaces Allis Chalmers OEM number 70226497, 70250397, 70277280, 79003713, 79004255, Replaces Allis Chalmers Casting number A105181, 126035, Includes mounting gasket, Without Pulley, (Item #: 206404) $99.01

Water Pump, Threaded Port Type - This water pump includes back plate 70207820and back plate to water pump gasket 70207832. This water pump comes WITHOUT back plate to block gasket and WITHOUT pulley. If gasket is needed, order part number 70234382. For tractor models B, C, CA, D-10, D-12, D-14. This water pump has a threaded bypass hole. If you are not using a bypass, you may need to find a threaded plug. Plug shown is not always included. Also Replaces 250397, 79016821, 70250397. (Item #: 104190, Ref: 79016821) $73.00

Decals and Emblems

$Allis Chalmers D12 Decal, 2-1\2 inch Diamond, Blue Background, Mylar$
Decal, 2-1/2" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" Blue Background, Mylar decal, (Item #: 100149) $3.40

$Allis Chalmers D12 Decal, 2-1\2 inch Diamond, Orange Background, Mylar$
Decal, 2-1/2" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" with Orange Background, Mylar decal, (Item #: 100148) $3.40

Decal, 6" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Blue Background, Mylar decal, (Item #: 100147) $5.10

Decal, 6" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Orange Background, Mylar decal, (Item #: 100146) $5.10

Decal, Black with Long A&S, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, Black lettering with long A and S, 22-1/4" Long, Mylar decal, (Item #: 100142) $8.50

No
Picture
Decal, Blue with Border, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers w/Border, Blue, Mylar decal, (Item #: 100145) $8.50

Decal, Blue with Long A&S, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, W/O Border, Long A&S, Blue, Mylar decal, (Item #: 100143) $8.50

Decal Set - For model D12. This is a set of 15 self-adhesive decals. These are printed on Mylar, not die cut. (Item #: 183371, Ref: R1866) $60.00

No
Picture
Decal Set, Chassis - For model D12 includes model numbers for tractor models with metal nameplates. (Item #: 183728, Ref: R4636) $33.60

No
Picture
Decal Set, Complete - Complete set with chrome. For model D12 series II. (Item #: 100216, Ref: R0420) $70.00

Decal Set, D12 1957-60, Black Bar Grille, Mylar - For Allis Chalmers tractor model D12 (1957-60), Mylar decals, (Item #: 100158) $67.00

$Allis Chalmers D12 Decal, Triangle, Black and Orange with White Background, 1-1\2 inch x 1-1\2 inch, Mylar$
Decal, Triangle, Black and Orange with White Background, 1-1/2" x 1-1/2", Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, 1 1/2" x 1 1/2", Black and orange on white background, Mylar decal, (Item #: 100162) $2.60

Diamond Decal, 6" Clear, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Clear Background, Mylar decal, (Item #: 100173) $5.10

Emblem, Cream on Chrome Diamond - For Allis Chalmers tractor models D10, D12 (1951-later), D14 (s/n 19001-later), D15, D17 (s/n 24001-later), D19, D21 (1965-earlier), ED40 (Grille emblem only) Replaces Allis Chalmers OEM number 70233852, 233852, , Compatible with Gleaner Combine (s) C, E, E3, F, K, Fits steering wheels or grilles, Chromed emblem with cream enameled background using AC starburst, Cream Steering Wheel use Item #: 101408, (Item #: 101409) $35.00

Emblem, Hood, AG Tractor - Qty (1). This is a raised-letter hood side emblem for Allis-Chalmers models D10, D12, D14, D15, and D17. This metal emblem has the Allis-Chalmers creme background with black letters. THIS SINGLE EMBLEM COVERS ONLY 1 SIDE OF TRACTOR. (Item #: 103884, Ref: 70233854) $79.00

Emblem, Hood, INDUSTRIAL Tractors - Qty (1). This is a raised-letter hood side emblem for INDUSTRIAL Allis-Chalmers models D10, D12, D14, D15, and D17. This metal emblem has a black background with unpainted letters. Please Note: picture does not show correct color. THIS SINGLE EMBLEM COVERS ONLY 1 SIDE OF TRACTOR. (Item #: 126679, Ref: R4520) $79.00

Emblem, Orange on Chrome Diamond - For Allis Chalmers tractor models D10, D12, D14, D15, D17, D19, D21, ED40 Replaces Allis Chalmers OEM number 70228474, , Compatible with Gleaner Combine (s) A2, C, E, E3, F, Chromed emblem with orange enameled background using AC starburst, Fits steering wheels or grilles, A/C Orange Steering Wheel Spinner use Item #: 101409, (Item #: 101408) $37.87

Drive Train

No
Picture
Allis Chalmers, 70225413, Used - For Allis Chalmers tractor models CA, D10, D12, D14, D15, Replaces Allis Chalmers OEM number 70225413, Teeth: 30, For a new version of this item use Item #: 172444, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439939) $78.01

Control Lever Knob - Three knobs used per tractor. Fits D10, D12, D14, D15, D17, D19. Also Replaces 70228215. (Item #: 115352, Ref: 228215) $5.30

Differential Carrier Seal - This differential carrier seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: D10 to serial number 3501, D12 to serial number 3001, D14 to serial number 19001, D15, ED40, I400, I500, I60, 500, I600. Replaces: 206538, 230851, 232186, 261733, 261958, 800351, 70206538, 70230851, 70232186, 70261958, 70800351, CR11801 (Item #: 169955, Ref: 471765) $9.10

Final Drive Pan Gasket - For tractor models B, C, CA, D10, D12, D14, D15, ED40, I60, I500, I600. Two used per tractor. Sold individually. Replaces 70233186, 70225103. (Item #: 178092, Ref: 70205515) $18.10

Gear, 1st, Pinion Shaft - 50 tooth. For tractor models (CA serial number 13291 and up), (D10 serial number 3501 and up), (D12 serial number 3001-9000), D14, (D15 serial number up to 17565). (Item #: 172484, Ref: 70228296) $156.00

Gear, 2ND, Pinion Shaft - 41 tooth. For tractor models CA serial number 13291 and up, D10, D12, D14, D15. Replaces 70228290. (Item #: 172469, Ref: 70234168) $206.00

Gear, 3rd, Main Shaft - 30 tooth. For tractor models CA, D10, D12, D14, D15. (Item #: 172444, Ref: 70225413) $79.98

Gear, 4th, Pinion Shaft - 24 tooth. For tractor models (CA serial number 13291 and up), D10, D12, D14, D15. (Item #: 107021, Ref: 70228294) $159.00

Gear, Reverse Idler - 21 tooth. For tractor models CA, (D10 serial number 3501 and up), (D12 serial number 3001 and up), (D14 serial number 19001 and up), D15. (Item #: 110974, Ref: 70232498) $170.00

Gear, Reverse, Pinion Shaft - 30 tooth. For tractor models (CA serial number 13291 and up), (D10 serial number 7760 and up), (D12 serial number 6091 and up), D14, D15. (Item #: 126602, Ref: 70241367) $164.00

Gear Shift Boot - This is an Original Style Gear Shift Boot. For Allis-Chalmers models B, C, CA, WC, WD, WD45, D10, D12, D14, and D15. (Item #: 107809, Ref: R4457) $9.50

Gear Shift Knob - This Gear Shift Knob has a 0.400 inch inside diameter hole. Fits B, C, WD, WD45, D10, D12, D14, D15, D17, D19, D21. Replaces: 226023, 70226023 (Item #: 121931, Ref: 226023) $7.30

Gear Shift Lever Washer And Snap Ring Kit - This Gear Shift Lever Washer and Snap Ring Kit retains the gear shift lever into the housing. It measures: 0.254 inches thick, 1.368 inch outside diameter and 0.998 inch inside diameter. Fits: B, C, CA, D10, D12, D14, D15, ED40, G, WC, WD, WD45, WF. Replaces retainer: 207772, 70207772 and snap ring: 207771, 202875, 70202875. (Item #: 129237, Ref: 70202875) $15.60

Pinion Shaft Coupling - For tractor models (CA serial number 13291 and up), D10, D12, D14, D15. Replaces 70225833. (Item #: 111283, Ref: 70228295) $87.00

Pinion Shaft Gear, 3rd - 37 tooth. Also replaces 228293, 233997, 234575. For tractor models CA, D10, D12, 6090, D14, D15. (Item #: 126601, Ref: 70225831) $204.22

Rear Axle Seal - This rear axle seal measures 3.881 inches outside diameter, sealing a 2.75 inch diameter shaft and is .468 inches wide. For tractor models D10, D12, D14, D15. (Item #: 128507, Ref: 70218284) $13.70

Transmission Main Shaft Seal - This transmission main shaft seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: D10 to serial number 3501, D12 to serial number 3001. Replaces: 206538, 230851, 232186, 261733, 261958, 800351, 70206538, 70230851, 70232186, 70261958, 70800351 (Item #: 169955, Ref: 471765) $9.10

Electrical System

Alternator Bracket Kit - This Alternator Bracket Kit fits tractor models B, [C, CA must trim 1 inch off lower end of adjustment bracket and re-drill hole to clear draglink], [D10, D12, D14 lower bracket only], IB. Use with 8NE10305SE alternator and existing belt. (Item #: 178916, Ref: ACS2347) $61.00

Battery Box Lid - For Allis Chalmers tractor models B, C, CA, D10, D12, G, WD, WD45, Replaces Allis Chalmers OEM number 70210907, 210907, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126449) $43.30

Battery Box Side Cover - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, G, WD, WD45, Replaces Allis Chalmers OEM number 70222525, 2222525, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126450) $46.44

Battery Cable - Battery cables, ground. For D10, D12. 17" Long (Item #: 115794, Ref: 70241893) $12.90

No
Picture
Brush - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, WD, WD45, Volts: 6, Quantity: 4 required, (Item #: 176922) $0.50

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. For models B, C, (CA engine serial number CE-149840 and up), D10, D12, D14, D15, D17, (WC, WD, WD45 serial number 136318 and up). Replaces Delco 811735 and 70225733. (Item #: 104554, Ref: 1750411M91) $8.70

No
Picture
Distributor Dust Cover - Cover includes gasket, felt, and washer. For CA, D10, D12, D14, D15, D17, D19, WD, WD45. (Item #: 103153, Ref: 70225734) $9.00

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models B, IB, C, G, CA, WD, WD45, WC, WF, D10, D12, D14, D15, D17, D19, RC. Replaces 225734 and 70225734. (Item #: 103153, Ref: 1900119) $9.00

No
Picture
Distributor, Rebuilt - For tractor models D10, D12, D14, D15, D17 all built between 1959 and 1965. Add $25.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203556, Ref: 1112593) $265.01

Distributor, Remanufactured, Wico, XB4000 - For Allis Chalmers tractor models B, C, CA, D10, D12, RC, U, UC, WC, WD, WD45, Compatible with Minneapolis Moline tractor models R, Z, Replaces Wico manufacturer number XB4000, Includes distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, This is to change over from a magneto to a distributor, Fits 4 cylinder tang drive, (Item #: 204528) $295.01

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits tractor models B, C, IB, RC, WC, WD, WF, CA, D10, D12, D14, D17, D19, G, WD45, D15, H3, I40, I400, I500, I60, I600. With 1112461, 1112601, 1112655 1111411 or 1112607 Delco Distributor and Clip Held Cap. Replaces: bushing: 225773, 70225773, 0.005 inch shim washer: 225797, 70225797, 0.034 inch washer: 250977, 70250977, 0.010 inch shim washer: 4050123, 74050123. (Item #: 178103, Ref: ABC3007) $29.50

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Allis Chalmers with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. Replaces: 225791, 225792, 225793, 225794, 225795, 70225791, 70225792, 70225793, 70225794, 70225795 (Item #: 111468, Ref: 1904376) $14.40

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - This Electronic Ignition Kit is for Delco Distributors in the below listed models. Replaces points and condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fuel economy. Compatible with all 12-volt negative ground systems and 6-volt systems that have been converted to 12-volt negative ground. For tractor models G, B, C, CA, WC, WD, WF, WD45, D10, D12, D14, D15 and D17. NOTE: On those models that use a Distributor Dust Shield, you may be required to drill a larger hole in the Dust Cover for the Electronic Parts to fit properly. (Item #: 105071, Ref: 1142) $154.00

Fuse Holder - Mounts on 5/8 inch diameter hole. 2 spade connectors. Replaces 230246, 70230246 (Item #: 112273, Ref: 376852R91) $11.10

Generator - 6 volt, 35 amp. For tractor models D10 serial number 3501 and below, D12 serial number 3000 and below, D14 serial number 19000 and below. Refundable $25.00 core charge will be added to orders. Replaces 79004800. (Item #: 178426, Ref: TG-72) $363.00

Generator, 6 Volt - Pulley not included. For tractor models D10, D12, D14 all gas built from 1957-1960. Replaces Delco #1100025, 1100029, 1100034, 1100039, 1100042, 1100052, 1100055, 1100504. Add $25.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. (Item #: 178426, Ref: 1100052) $363.00

Generator Bracket - Lower - For Allis Chalmers tractor models B, C, CA, D10 (s/n 3500-earlier), D12 (s/n 3000-earlier), D14, Replaces Allis Chalmers OEM number 70210990, Length 6.080, Width 1", Thickness 0.250, 2 Holes -0.375 O.D., 2 Holes- 0.340 O.D., (Item #: 126570) $25.80

No
Picture
Generator, Delco Type, 12 Volt - For tractor models D, D10, D12, D14, D15, D17, D19, DD, H3, HD3, RT40. Replaces Delco part number 1100305. Remanufactured. Refundable $25.00 core charge will be added to your order. (Item #: 203181, Ref: TG-59) $370.72

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit for a Delco distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For: A, B, CA, G, WD, WD45, D10, D12, D14, D15, D17, D19, C, E, F, 60, 66, 72, 90, WF, I40, I400, I500, I60, I600, H3. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1112593, 1111708. (Item #: 103151, Ref: ATK1DCR) $9.80

Key Switch - 5 terminal, with keys and jam nut. For tractor models D10, D12, (D14 from serial number 9500 and up), (D15 up to serial number 9000), (D17 up to serial number 75000), D19, D21. Replaces 235785, 231705, 233320, 229201, 234356 70235785, 70231705, 70233320, 70229201, 70234356. (Item #: 115836, Ref: 230163) $41.64

Rotor - Used with Delco distributors 1111411 1112607, and 1112609 with a clip held cap. For tractor models: B, IB, C, CA, G, D10, D12, D14, D15, D17, D19, H3, RC, WC, WD, WD45, I400, WF, I500, I600. Replaces 1921285, 225736, and 70225736. (Item #: 110177, Ref: 1750498M1) $3.60

Rotor - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, G, IB, WD, WD45 Replaces Allis Chalmers OEM number 70225736, 225736, , Compatible with Gleaner Combine (s) E, E3, K, Replaces Delco Remy manufacturer number 1921285, For Delco distributors with clip held cap, (Item #: 111111) $12.90

Solenoid, 12 Volt - This is a 3 Post 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. For tractor models D10, D12, D14, D15, (D17, D19, 170, 180 with 1107695 starter) D21 all with gas engines and Delco starters. Replaces Delco DR1467, OEM 237136, 233296, 70237136, 910687. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $18.70

Solenoid Switch - Solenoid Switch, 6-volts For tractor models using Delco Starters 1108036, 1107466, 1107474, 1107905, 1107025, 1107977, 1107092. For B, C, 100, D10, D12, D14 and D15. Replaces 70223334, 223334. (Item #: 105670, Ref: 142364HA) $23.30

Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H8, H8J, H10, H11, H12, J8 spark plugs. 14mm thread diameter, 3/8 inch reach, 13/16 inch hex. Price is for 1 plug. If you need 4, you need to order 4. Verify correct spark plug size and type (Item #: 111743, Ref: AL295) $4.20

Spark Plug Wire Set, Custom - Fits: B, C, CA, D10, D12, D14, D15, D17, I40, I400, I500, I60, I600, IB, RC, WC, WD, WD45, WF, 170, 175, 510, 512, 514, 610, 612, 614 With Distributor Only. Replaces: 225084, 225613, 229867, 70225084, 70225613, 70229867 (Item #: 107890, Ref: S.65034) $20.80

No
Picture
Starter - Delco Style (4181), Remanufactured, 79004825, Delco Remy, 1107466 - For Allis Chalmers tractor models D10, D12, D14, Compatible with Allis Chalmers Engine (s) 149, Replaces Allis Chalmers OEM number 79004825, 70231935, Replaces Delco Remy manufacturer number 1107466, 1107472, 1107474, 323-95, Replaces manufacturer number 4181, 140-0923, 91-01-4446, Delco Style, Voltage: 6, Rotation: Counter Clockwise, Teeth: 10, For PVC Body Solenoid use Item #: 107059, Additional Handling and Oversize Fees Apply To This Item, (Item #: 203445) $474.30

Starter Drive - This starter drive gear assembly fits the following tractor models: D10, D12, D14, and D15 all 1961 and later that are using the Delco starters with the numbers matching: 1107265 and 1107758. (Item #: 118455, Ref: 70233295) $54.00

Starter Drive - For tractor models 6 volt 10 teeth D-12, D-14, WC, WD, WD45, WF, D-10 SN# <3501. Replaces 1859020, 1868804. (Item #: 107059, Ref: 74044454) $32.50

Starter Drive - Starter Drive - WC, WF, WD, WD45 (models using Delco 1107017 or 1107951) - D10, D12, D14 (models for 1957-1960 using Delco 107474 or 1107466). Replaces 1868804. (Item #: 107059, Ref: 565549) $32.50

Starter Drive Housing - For tractor models B, IB, C, CA, RC, WC, WD, WD45, D10, D12, D14. All with Delco starters 1107466, 1107006, 1107017, 1107024, 110743, 1107044, 1107045, 1107046, 1107096 or 1107951. (Item #: 150733, Ref: 1879156) $127.00

Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style. For models WC, WF, WD, WD45 using Delco starter 1107017 or 1107951. Also for models D10, D12 and D14 using Delco starter 107474 or 1107466. Replaces 1868804. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Item #: 112575, Ref: 565549-New) $55.48

Starter Drive Parts - Complete unit available as 356037R91 (Item #: 178541, Ref: SPD12) $139.00

Starter Drive Spring - Starter drive spring For B, C, CA, D10, D12, D14, WC, WD, WD45, WF. (Item #: 111718, Ref: 1860639) $31.00

Tune-up Kit - for 4 Cylinder Gas Engines. Includes spark plugs (Autolite 295 or equivalent), points, condenser and rotor. For AC tractors using 14 mm, 3/8 inch reach, 13/16 inch hex spark plug. Fits CA, WD, WD45, D10, D12, D14, D15, D17 except with Delco Distributor number 112688. Verify correct spark plug size and type. (Item #: 111815, Ref: ACTK1) $27.30

Voltage Regulator - 12-volt, using Delco generator 1100305 (VR1817). Also gas or diesel using Delco generators 1100345, 1100426. For D10, D12, D14, D15, D17, D19. The Three Post side of this regulator may be parallel or slightly splayed. Replaces Allis Chalmers Numbers; 229484, 236680, 70229484, 70236680 Delco Numbers; 1118381, 1118779, 1118977, 1118981, 1118987, 1118993, 1118997, 1118999, 1119191, 1119576 (Item #: 105581, Ref: 182548M92) $26.50

Voltage Regulator, 6 Volt, Positive Ground - For tractors using Delco generator 1100025 (VR1814). For D10, D12, D14. Replaces 70228365. This external voltage regulator has a flat base for mounting. There are 4 terminals (lights, battery, field and generator). Designed for A type circuits in positive ground systems with 2 brush generators Measures 7 to 9 output amps. (Item #: 105516, Ref: GDR6003) $30.00

No
Picture
Wiring Harness Kit - For Allis Chalmers tractor models D10, D12 (s/n 9001-later), Compatible with Allis Chalmers Construction and industrial models I400, (Item #: 167036) $436.30

Engine Bearings

Cam Bearing Set - Complete set (front and rear are one size, center is different size...all included in this set. Please check before ordering. For D10, D12, D14, D15 with 138 CID and 149 CID 4 cylinder gas engines. Replaces: 70206963, 70209130, 209130, 206963 (Item #: 105911, Ref: SH-505S) $47.30

Main Bearing Set, .010 - Main bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105908, Ref: MBK-D10G-010) $242.00

Main Bearing Set, .020 - Main bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105909, Ref: MBK-D10G-020) $203.00

Main Bearing Set, .030 - Main bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105910, Ref: MS-902AL-030) $234.00

Main Bearing Set, Std - Main bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105907, Ref: MBK-D10G) $196.44

Rod Bearing, .010 - Individual connecting rod bearing. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105903, Ref: 237802-010) $21.40

Rod Bearing, .020 - Individual connecting rod bearing. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105904, Ref: 237802-020) $17.87

No
Picture
Rod Bearing, .030 - Individual connecting rod bearing. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105905, Ref: CB-781AL-030) $21.50

No
Picture
Rod Bearing, .040 - Individual connecting rod bearing. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105906, Ref: CB-781AL-040) $18.10

Rod Bearing Set, .010 - Connecting rod bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 184855, Ref: CRK-D10G-010) $110.00

Rod Bearing Set, .020 - Connecting rod bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 184858, Ref: CRK-D10G-020) $110.00

Rod Bearing Set, Std - With Journals measuring 1.937 inches. Connecting rod bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 183862, Ref: CRK-D10G) $76.00

Rod Bearing, Std - Individual connecting rod bearing.For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105902, Ref: 237802) $20.90

Engine Gaskets

Gasket Set, Complete - Complete gasket set. For D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engines. Replaces 70255326. (Item #: 105912, Ref: 70277265) $141.00

Head Gasket Set - For tractor models D10, D12, D14, D15 with 138, 149 or 160 CID 4 cylinder gas engines. Replaces 70277264. (Item #: 105913, Ref: 70255323) $54.00

Oil Filter Gasket - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D17, IB, RC, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70204863, 70207882, 70232522, 70233228, Length: 4-13/16", Tall: 1-1/2", Center to center mounting holes: 3-1/2", Rubberized Cork, (Item #: 164309) $6.10

Oil Pan Gasket - Oil Pan Gasket. For tractors: B, IB, C, CA, RC, D10, D12, D14, D15, gas. For D10, D12, D14, D15. (Item #: 105881, Ref: 70232325) $9.50

Rocker Arm Gasket - For tractor models D10, D12, D14, D15. (Item #: 158274, Ref: 70255296) $18.60

Thermostat Housing Gasket - For Allis Chalmers tractor models D10, D12, D14, D15, Replaces Allis Chalmers OEM number 70228125, (Item #: 164308) $6.80

Engine Rebuild Kits

Basic Engine Kit - For D10, D12, D14, D15 (except Series II serial number 9001 and up). With 138 or 149 CID 4-cylinder gas engines. This basic kit contains a sleeve and piston kit with rings, pins and retainers, an overhaul gasket kit. No bearings or pin bushings. (Item #: 130498, Ref: BEKA1127-LCB) $389.00

Basic In-Frame Overhaul Kit - Basic in-frame kit for 138 and 149 CID 4 cylinder gas engine, except series II serial number 9001 and up. Contains: PK127 sleeve and piston kit with rings and pins, 70277264 valve grind gasket set, 70232325 oil pan gasket kit. For D10, D12, D14, D15. (Item #: 183811, Ref: BIFA1127) $547.00

Cylinder Kit - For Allis Chalmers tractor models D10 (series II), D12 (series II), D14, D15, Compatible with Allis Chalmers Construction and industrial models H3, I40, Compatible with Allis Chalmers Engine (s) 138 (gas), 149 (gas), Replaces Allis Chalmers OEM number 70284393, Bore: 3.50", (Item #: 128702) $126.00

Engine Rebuild Kit - Less Bearings - 3.562" Overbore, 138, 149 - For Allis Chalmers tractor models D10, D12, D14, D15 (Series I, s/n 9000-earlier)), Compatible with Allis Chalmers Engine (s) 138 (gas), 149 (gas), Bore: 3.562", Compression Ratio: 7.50:1, Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 105910, (Item #: 130497) $759.00

Overhaul Kit - For D10, D12, D14, D15 (except Series II serial number 9001 and up). With 138 or 149 CID 4-cylinder gas engines. Kit includes: sleeves, pistons, rings, pins, overhaul gasket set, valves, springs, guides and keys. (Item #: 184903, Ref: EOK1127-LCB) $707.05

Valve Overhaul Kit - Contains intake and exhaust valves, springs, guides and keys. For tractor models B, C, CA (4-cylinder gas 125 CID or 160 CID engines), D10, D12, D14, D15 (4-cylinder gas 138 and 149 CID engines) and D15 Series II (4-cylinder gas 160 CID engine). (Item #: 120228, Ref: VOKA125) $139.00

Engine Parts

1st Pinion Shaft Gear - For Allis Chalmers tractor models D10, D12, D14, D15, Replaces Allis Chalmers OEM number 228296, 50 Teeth, (Item #: 111925) $160.00

Crankshaft - This new Crankshaft fits tractor models D10, D12, D14, D15 (Gas). Replaces: Casting number: 227550. Uses Main Bearings MBK-D10G and Rod Bearings CRK-D10G. Bearings not included. (Item #: 100027, Ref: 70240921) $742.00

Crankshaft Pulley - This new Crankshaft Pulley fits tractor models D10 (serial number 3501 and up), D12 (serial number 3001 and up), D15 (Gas), I60, Backhoe: I600, Forklift: I500. Replaces: 233396, 235043, Set Screw: 902870, 70233396, 70235043, Casting Number: AM4761. (Item #: 111720, Ref: 70235043) $85.00

Crankshaft Pulley - Fits (B, C, IB serviceable but does not have provisions for hand crank), CA, D10 (up to serial number 3500), D12 (up to serial number 3000), D14; Replaces: 236741, 70236741, AM4529. (Item #: 108008, Ref: 70236741) $67.00

No
Picture
Crankshaft, Reground - For tractor models D10, D12, D14, D15 all gas with casting number 227550. Additional $50 core charge will be added to your order. (Item #: 200006, Ref: R1197805) $490.01

Cylinder Head, Remanufactured, AM4859 - For Allis Chalmers tractor models D10, D12, D14, D15 (s/n 9000-earlier), Replaces Allis Chalmers Casting number AM4859, AM4367, AM5481, Not a Welded Head, Engine 149, Cylinders: 4, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200029) $857.01

No
Picture
Cylinder Head, Used - For Allis Chalmers tractor models D10, D12, D14, D15 (s/n 9000-earlier), Replaces Allis Chalmers Casting number AM4367, AM4859, AM5481, Engine(s): 149, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200029, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400029) $365.01

Flywheel Ring Gear - This Flywheel Ring Gear has 93 teeth. It is used on Allis Chalmers D10 to serial number 3500, D12 to serial number 3000, and D14 to serial number 9000. Replaces part number 70233305 (Item #: 164571, Ref: 70233305) $94.00

Governor - For B serial number 123996 and up, IB serial number 2836 and up, CA, D10, D12, D14, D15 (all with a distributor, not for magneto type). Governor Assembly does not include housing. (Item #: 105367, Ref: 70225349) $171.00

Governor Gear Bushing - Mounted in front of the engine block, this Governor Gear Bushing measures: 1.881 inches outside diameter, 0.564 inches wide, and 1.752 inches inside diameter. It is used on Allis Chalmers B, C, CA, D10, D12, D14, D15, IB, RC, D272. Replaces 207466, 210689, 70210689 (Item #: 165362, Ref: 70210689) $25.50

Governor Rod Linkage Spring - Distributor or Magento Ignition, overall length 3-5/8 inch. For tractor models B, IB, C, CA, D10, D12, D14, D15, I40, I60, I600, RC. (Item #: 164570, Ref: 70212321) $25.00

Governor Shaft Bushing, Front - Measuring 0.437 inches inside diameter, 0.625 inches outside diameter, and 0.496 inches overall length, this bushing is used on Allis Chalmers: B, C, CA, D10, D12, D14, D15, IB, RC, D272. This part replaces Allis Chalmers part numbers 70207714, 207714 (Item #: 183461, Ref: 70207714) $15.90

No
Picture
Main Shaft, 2nd Gear - For Allis Chalmers tractor models D10, D12, D14, D15, Replaces Allis Chalmers OEM number 70234167, Teeth: 26, (Item #: 107019) $124.00

No
Picture
Main Shaft, 4th Gear - For Allis Chalmers tractor models D10, D12, D14, D15, Replaces Allis Chalmers OEM number 70225414, Teeth: 49, (Item #: 107020) $133.00

No
Picture
Main Shaft Reverser Gear - For Allis Chalmers tractor models D10, D12, D14, D15, Replaces Allis Chalmers OEM number 70234028, Teeth: 19, (Item #: 107017) $144.00

Pushrod - Fits D10, D12, D14, D15 (with 138 CI, 149 CI, 160 CI gas/LP engines. Industrial: 500, 510, 512, 514, 521, 610, 612, 614, 615, 621, H3, I40, I400, I60, I600 (with 138 CI, 149 CI, 160 CI gas/LP engines) Replaces: 70227633, 227633 9.233 inches in length, 0.341 inches in diameter. (Item #: 178582, Ref: 70227633) $28.00

Ring Gear, Flywheel - Has 116 teeth, outside diameter 11.12 inches, inside diameter 10.86 inch. Fits D10 (serial number 3501>), D12 (serial number 3001>), D14 (serial number 19001>), D15 (Gas/LP). (Item #: 113677, Ref: 70233196) $44.10

Rocker Arm Support Stand - This new Cast Rocker Arm Support Stand fits D10, D12, D14, D15, with G138, G149 or G160 engines. Replaces OEM part numbers: 227627, 239791, 70227627, 70239791. (Item #: 126111, Ref: 70227627) $47.20

Valve, Exhaust - For tractor models AC B, IB, C, CA, B15, B125, D10, D12, D14, D15 (4-Cylinder Gas). To order Valve Locks use part number 70206880. (Item #: 128610, Ref: 70228589) $12.80

Valve, Intake - Intake valve for AC B, IB, C, CA, B15, B125, D10, D12, D14, D15, (4-Cylinder Gas). To order Valve Locks use part number 70206880. (Item #: 128616, Ref: 70234829) $8.00

$Allis Chalmers D12 Valve Key, Intake and Exhaust, 1\2$
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. These Valve Keys are used in 125, 138 and 149 CID Gas Engines. Replaces 70206880. This is a package of 8. Sixteen required per engine. (Item #: 107088, Ref: 7HA6518) $0.60

Valve Rotator, Exhaust - Used on the following engines when equipped with Exhaust Valve Rotators: B116, B125, G138, G149, G160, W201, G201, G226, W226. Replaces OEM numbers 70224926V, 70224926, 224926. (Item #: 184379, Ref: 70224926) $32.70

Valve Spring - This valve spring is used on 125, 149, 201, 226 engines, on Allis Chalmers B, C, CA, D10 (series II), D12 (series II), D14, D15 (series II), D17, WC, WD, 170. Replaces 70206879, 206879 (Item #: 128606) $3.40

Valve Train Kit - For Allis Chalmers tractor models D10 (s/n 3500-earlier), D12 (s/n 3000-earlier), D14, D15 (Series I, s/n 9000-earlier), Compatible with Allis Chalmers Construction and industrial models H3 (s/n 6958-earlier), I40, I400, Compatible with Allis Chalmers Engine (s) 138, 149, Kit Includes: Intake and Exhaust Valves, Springs, Guides and Keepers, (Item #: 120229) $120.00

Valve Train Kit - For Allis Chalmers tractor models D10 (s/n 3501-later), D12 (s/n 3001-later), D15 (Series II, s/n 9001-later), Compatible with Allis Chalmers Construction and industrial models H3 (s/n 6959-later), I60, I600, Compatible with Allis Chalmers Engine (s) 160, (Item #: 120230) $173.00

Engine Pistons and Sleeves

Sleeve and Piston Kit - "Fire Flow" Sleeve and Piston Kit. Overbore from 3-3/8 inches or 3-1/2 inches to 3-9/16 inches. 1 kit used in 138 CID and 149 CID 4 cylinder gas engines. Contains sleeves, pistons, pins, retainers, top chrome and oil control ring set. For D10, D12, D14 with 138 or 149 CID 4-cylinder gas engines. Also for D15 except Series II serial number 9001 and up. (Item #: 184518, Ref: PK127) $572.00

Sleeve and Piston Set - This Sleeve and Piston Set is 3.5 inch bore for the G-149 Engine. Also 3.5 inch overbore for G-138 Engine. Contains piston, sleeve, pin, keepers, sleeve seals and rings for one cylinder. D10, D12, D14, D15 All Gas. Fits the D15 to serial number 9001. Replaces OEM part numbers 70229739 70207441, 70227562, 70227563, 70227564, 70230092. (Item #: 128702, Ref: 70229739) $126.00

Engine Rings

Piston Ring Set - Ring set for 4 pistons. Overbore 3-3/8 To 3-9/16~ For tractors: D10 to No. 3500, D12 to No. 3000, D14. For 4 cylinder gas engines. For 262, D19, GLEAMER C (Item #: 128961, Ref: PRS127) $177.00

Piston Ring Set - Complete engine Piston Ring Set for D10, D12 (serial number 3501 and up), D14, D15 (G149 engine). For four ring, 3-1/2 inch bore pistons. Verify measurements before ordering. (Item #: 176442, Ref: 70230092) $94.00

Piston Ring Set - .020" Oversize - 4 Cylinder - For Allis Chalmers tractor models D10, D12, D14, D15, Compatible with Allis Chalmers Construction and industrial models H3 (s/n 6958-earlier), I40, I400, Compatible with Allis Chalmers Engine (s) 138 (gas), 149 (gas), Compatible with Ford tractor models 501, 541, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 761, 771, 2000, 2100, Compatible with Ford Engine (s) 144 (diesel), Standard Bore: 3.5625", Ring Size: .020" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, Sold as a complete 4 cylinder set, For standard use Item #: 150216, (Item #: 150215) $270.00

Piston Ring Set - .040" Oversize - 4 Cylinder - For Allis Chalmers tractor models D10, D12, D14, D15, Compatible with Allis Chalmers Construction and industrial models H3 (s/n 6958-earlier), I40, I400, Compatible with Allis Chalmers Engine (s) 138 (gas), 149 (gas), Compatible with Ford tractor models 501, 541, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 761, 771, 2000, 2100, Compatible with Ford Engine (s) 144 (diesel), Standard Bore: 3.5625", Ring Size: .040" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, Sold as a complete 4 cylinder set, For standard use Item #: 150215, (Item #: 150216) $270.00

Piston Ring Set, For a Single Piston - For tractor models B, IB, C, CA, B125 with 125 CID gas engines, D10 (all), D12 (to serial number 3501 with G138 engine only). Four-ring 3-3/8 inch bore pistons. Contains 3 compression rings 1/8 inches, and 1 oil ring 3/16 inches per cylinder. (Item #: 121000, Ref: 70230093) $30.50

Exhaust System

Exhaust Stack, Chrome, Curved - Deluxe Double-Walled Curved Stack, Chrome. For tractor models B, C, CA, RC, D10, D12, D14, (D15 up to serial number 9001). 3 inch outside diameter, 5 inch BASE, 24 inch BODY, 29 inch OVERALL, 1 1/2 inch inlet outside diameter. For B thru CA with 2 1/2 inch hood exhaust hole, customer must enlarge the hood hole. (Item #: 178563, Ref: R4936) $214.30

Exhaust Stack, Chrome, Straight - Deluxe Double-Walled Straight Chrome Pipe measures 29 inches overall, a 5 inch base and a 24 inch body. Inlet outside diameter is 1 1/2 inches. Body is 3 inches diameter. For models with a 2 1/2 inch hood hole, the hole must be enlarged. For tractor models B, C, CA, RC, D10, D12, D14, (D15 serial number up to 9001). (Item #: 178565, Ref: R4935) $210.01

Manifold - Fits Allis-Chalmers D10 (after serial number 3501) and D12 (after serial number 3001). It replaces OEM number 70233235. Gasket set is available separately as part number 70234140 (Item #: 113680, Ref: 70233235) $304.00

Manifold Gasket - Manifold Gasket For D10, D12, D14, D15. Replaces 234140, 70234140. (Item #: 101482, Ref: 70234140) $9.20

No
Picture
Muffler - Muffler, prior to 9001. For D10, D12, D15 (Item #: 100043, Ref: 70233450) $60.00

Muffler - Muffler, oval, for D10 and D12 serial number 9002 and up. Inlet inside diameter 1-3/8 inch, Outlet outside diameter 1-1/2 inch, overall length 33-1/4 inches. (Item #: 100056, Ref: 70242070) $65.00

Muffler, Through Hood - Just like the original, this as a heat resistant painted through hood muffler. The dimensions of are: 1-1/4 inch inlet length, 1-1/2 inch inlet O.D., 20-1/2 inch shell length, 3-1/4 inch shell diameter O.D., 12-3/8 inch outlet length, 1-1/2 inch outlet O.D., 32-3/4 inch overall length. This muffler is designed for tractors with a 4 inch exhaust hole in the hood. If using All-Fuel manifold with instruction plate you will have to trim the tab to fit. Replaces 225341, 227240, 233450, 70227240, 70233450. (Item #: 189610, Ref: 70227240OE) $88.00

Muffler, Through Hood - Polished Stainless Steel will make your tractor shine! This as a through hood muffler. The dimensions of are: 1-1/4 inch inlet length, 1-1/2 inch inlet O.D., 20-1/2 inch shell length, 3-1/4 inch shell diameter O.D., 12-3/8 inch outlet length, 1-1/2 inch outlet O.D., 32-3/4 inch overall length. This muffler is designed for tractors with a 4 inch exhaust hole in the hood. If using All-Fuel manifold with instruction plate you will have to trim the tab to fit. Replaces 225341, 227240, 233450, 70227240, 70233450. (Item #: 182873, Ref: 70227240SS) $148.00

Muffler, Thru Hood - 2 1/2 inch INLET LENGTH, 1 3/8 inch INLET inside diameter, 16 1/2 inch SHELL LENGTH, 10 inch OUTLET LENGTH, 1 1/2 inch OUTLET outside diameter, 29 inch OVERALL LENGTH. REPLACES: 70233450 NOTE: Vertical/Round Body 3 1/4 inch Shell Diameter (INCLUDES BRACKETS - (1) TO HEAD BOLT and (1) TO MANIFOLD) Fits Models: B THRU HOOD - 1938 to 1957, C THRU HOOD - 1938 to 1957, CA THRU HOOD - 1938 to 1957, D10 with GAS ENGINE serial number <9001, D12 with GAS ENGINE serial number <9001, D14 with GAS ENGINE serial number <9001, D15 with GAS ENGINE serial number <9001. Replaces 225341, 227240, 233450, 70227240, 70233450. (Item #: 100043, Ref: 70227240) $60.00

Fuel System / Air Intake

Air Cleaner Cap - Inlet diameter 1-5/8 inch, outside diameter of cap 4 inches, overall height 1-3/8 inches. For tractor models B, C, (CA Used on Eng. No. CE-13732 and up), D10, D12. Replaces 225860, 242072. (Item #: 179254, Ref: 70242072) $22.70

Air Cleaner Hose - For Allis Chalmers tractor models B, C, CA, D10, D12, IB, Replaces Allis Chalmers OEM number 70206996, I.D: 1-1/2", Length: 2-7/16", (Item #: 162436) $6.00

Air Cleaner Hose Clamp - This clamp is used on B, C, CA, D10, D12, D14, RC, WC, WD as an air cleaner hose clamp. Works for hose outside diameter from 1 3/4 inches to 2 inches. It Replaces: 921913, 910144. (Item #: 178164, Ref: 608287) $3.80

Carburetor - Aftermarket replacement for 12522 outperforms the original Marvel carburetors: TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, 9706. Linkage is reversible. This carburetor comes with studs which attach to the carburetor and will not work with those applications that the studs need to attach to the manifold. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. 1 year warranty. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. (Item #: 185128, Ref: 12522B) $293.00

Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: B, B-15, C, D10, D12, CA 1952-56, IB, R, W, WC, WD Crawler. Replaces TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, 9706. This carburetor comes with studs that attach to carburetor. THIS WILL NOT WORK IN THOSE APPLICATIONS THAT STUDS MUST BE USED IN THE MANIFOLD. 2 5/16 InchES CENTER TO CENTER ON MOUNTING BOLTS. Made in USA, 1 year warranty. (Item #: 100747, Ref: 12522) $492.00

Carburetor Float - This carburetor float is 2.25 inches wide and is used for the following Zenith carburetor models: 8691, 9636, 9635, 9804, 9805, 10697, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 8561, 8691, 11141, 11142, 12401, 12749, 12401, 12749, 8781, 8979, 9707, S1203, 10981 and for tractor models: B, C, CA, D10, D12, WC, and WD. (Item #: 108454, Ref: CTP28) $16.20

Carburetor Fuel Needle - Main Jet Adjusting Needle Assembly for Zenith carburetor series 61 and 62, model numbers: 9707, 10981, 12401, 12749, 13876, 225621. For D10, D12, W, WC, WD, WF. (Item #: 108462, Ref: 71-28) $12.60

Carburetor Kit, Basic - Kit for Zenith 8561, 8691, 9636, 9635, 9804, 9805, 106977, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 11142, 12401, 12749, 8781, 8979, 9707, S1203, 10981 carbs used on B, C, CA, D10, D12, WC, WD. (Item #: 100738, Ref: Z101) $27.40

Carburetor Kit, Basic - Kit for Marvel TSX863 or TSX848 carbs used on D10, D12, D15, D17, D19, D21. (Item #: 100735, Ref: MS103) $25.80

Carburetor Kit, Basic - Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For tractor models B, B15, C, D10, D12, CA, IB, R, W, WC, WD. (Item #: 186565, Ref: K2119) $47.90

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 13876, 12522, 12522B. (Item #: 183586, Ref: BK44V) $28.30

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 12749, 12401. For the following tractor models: D10, D12 (1961-68). Add $50.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203644, Ref: 1122-CARB) $235.01

No
Picture
Carburetor, Rebuilt - This rebuilt Zenith carburetor is a replacement for 12522. Replaces Marvel numbers TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. A $50.00 core charge will be added to the price and is refundable when you send your core to us and it is verified to be a rebuildable core. You will receive instructions for returning your core for a refund if you have one available. (Item #: 203219, Ref: 12522R) $225.01

Fuel Line - This steel fuel line fits the following tractor models: B, C, CA, D10, and D12. It also fits the D14 auxiliary engine only, not the tractor. It replaces the OEM part numbers 70215478 and 70207278. You may need to trim to fit your tractor. (Item #: 179393, Ref: 70243108) $33.00

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor.Used on Allis Chalmers B, C, CA, D10, D12, D14, (D15 Gas To Serial Number 9001), (D17 Gas to serial Number 42000), (D19 Gas To serial Number 12000), G, I40, I400, I60, I600, 170, 175, 180, IB, RC, WC, WD, WD45, WF. Replaces original part numbers 208362, 70208362. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces 70237945 and 237945. Will fit the following models: B, IB, C, CA, G, D10, D12, D14, D15 (Gas To Sn#9001), D17 (Gas to Sn#42000), D19 (Gas To Sn#12000), RC, WC, WD, WD45, I400, WF, I600 (Gas), 170 (Gas), 175 (Gas), 180 (Gas). (Item #: 105382, Ref: 9N9162) $3.20

Fuel Tank Cap - For Tractor Models B, C, CA, G, IB, RC, WD, D10, D12, D14, D15, D17, D19, I40, I400, I60, WC, WF, WD45, 170, 175, 180, 185, Backhoe: I600. Replaces: 253690, 70253690. This is a Non-Vented Cap. 7/8 inch outside diameter, 2 11/16 inch inside diameter, 1/4 inch high. Zinc Finish. 1.850 inches edge of tang to edge of tang. (Item #: 185782, Ref: D5NN9030A) $9.10

Sediment Bowl Assembly - Small Bowl, 2 outlet type. A 1/8 Inch Pipe Plug will be needed if only one outlet is used. For Models: D10, D12, WC, WD, WD45, D15D, D17, D19, D21, 180, 170 diesel. (Item #: 105369, Ref: 70239167) $22.70

Sediment Bowl Gasket - 2" - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15 (gas, s/n 9001-earlier), D17 (gas, s/n 42000-earlier), D19 (gas, s/n 12000-earlier), G, IB, RC, WC, WD, WD45, WF, 170 (gas), 175 (gas), 180 (gas) Replaces Allis Chalmers OEM number 70208362, 208362, , (Item #: 105372) $1.80

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Item #: 105364, Ref: 49923D) $3.50

Throttle Lever Knob - For tractor models CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. (Item #: 112466, Ref: 220901) $7.40

Gauges

Ammeter - Ammeter for tractor models 170, 190, D10, D12, D14, D15, D17, D19, D21. (Item #: 110403, Ref: 70254407) $20.90

Amp Gauge - This amp gauge has the "Allis-Chalmers" logo printed on the face. It fits the following tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, 160, 170, 175, 180, 190, 190XT, 200, 210, 220. It is meant to be used on systems that have been converted to 12 volts. It has a white face, chrome bezel, and it reads 60-0-60. Replaces 70254407, 254407 (Item #: 187035, Ref: ACS1833) $30.00

Amp Meter - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, RC, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70254407, (Item #: 162433) $10.00

No
Picture
Amp Meter Gauge - For Allis Chalmers tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180 (s/n 12799 - earlier), 185, 190, 190XT, 200, 210, 220, Replaces Allis Chalmers OEM number 70254407, 70240987, 60-0-60, Voltage: 12, Diameter: 2", (Item #: 173678) $16.60

Dash Light with 12V Bulb - Used on the following Allis Chamlers models: D10, D12, D14, D15, D17, D19, D21, I40, I400, I60, I600, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, this Dash Light replaces OEM part numbers 229203, 230247, 234404, 70229203, 70230247, 70234404. This part has a 0.658 inch socket diameter, 1 inch center to center on mounting holes and a Chrome finish. (Item #: 105311, Ref: 70234404) $33.87

Fuel Gauge - This new fuel gauge includes the gasket. Fits D10, D12, D14, D15, ED40, H3, HD3, I40, I400, I60, I600 (gas, diesel). Replaces 227865, 70227865. (Item #: 155322, Ref: 70227865) $76.00

Oil Gauge - Oil pressure gauge. For IB, B, C, CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF (Item #: 102135, Ref: 70207834) $18.20

Oil Gauge - OIL GAUGE For D10, D12, D14, D15, D17``0-45 PSI (Item #: 103879, Ref: 70228718) $32.38

Oil Pressure Gauge - For Allis Chalmers tractor models D10, D12, D14, D15, D17, WD45 Replaces Allis Chalmers OEM number 70228719, , Compatible with Case tractor models C, D, L, R, S, V, 200B, 210B, 211B, 430 (8262799-earlier), 440 (8262799-earlier), 441 (8262799-earlier), Compatible with CockShutt / CO OP tractor models 20, 30, 40 (Blackhawk), 50 (Blackhawk), 550, 560, 570, Compatible with Ford tractor models 2N, 8N, 9N Replaces Ford OEM number 9N9273A, , Compatible with International tractor models I6, I9, M, OS6, Super M, Super MTA, Super W6, Super W9, TD6, TD9, W9, 350, 400, 450, 460, 560, 600, 650, 660, 3616, Compatible with Massey Ferguson tractor models F40, Super 90, TE20, TEA20, TO20, TO30, TO35, 35 (Blackhawk), 50 (Blackhawk), 65, 85, 88, 95, 97, 135, 150, 165, 202, 204, 2135, 2200, 2500, 3165, Compatible with Massey Harris tractor models Colt, Mustang, Pacer, Pony, 20, 22, 30, 33, 44 (Special), 50 (Blackhawk), 55, 81, 82, 101 (Jr), 102 (Jr), 201, 202, 203, 303, 333, 444, 555, Compatible with Minneapolis Moline tractor models BF, Big Mo, G, G550, G705, G706, G707, G708, G750, GB, GTA, GTB, GTC, GVI, Jet Star, Jet Star 2, Jet Star 3, JET STAR 3 SUPER, M5, M504, M602, M604, M670 (Super), M670 Super, R, RT, RTI, RTU, U, UB (Special), UDLX, UT, UTS (Special), Z, 4 Star, 5 Star, Compatible with Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, Super 99, 60, 66, 70, 77, 80, 88, 90, 99, 440 (8262799-earlier), 660, 900, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1800, 1850, 1900, 1950, Chrome Bezel, No Logo, Black Face, White Letters, Dash Mounted, Includes Bracket and Studs (1/8" NPT), 0-50 PSI, (Item #: 150623) $15.20

Tachometer - Includes tachometer, bracket and clamp. For tractor models D10 and D12 up to serial number 9000 with 4 speed transmissions. Has AC logo. Measures 3.330 inch housing outside diameter and 1.500 inch clamp inside diameter. Replaces: 232176, 232176, 232176, 232177, 232177, 232177, 232189, 232189, 232189, 70232176, 70232176, 70232177, 70232177, 70232189, 70232189. Uses tach cable 244104. (Item #: 115688, Ref: 232189) $74.98

Tachometer Cable - For tractor models D10 and D12 up to serial number 9000. (Item #: 122465, Ref: 244104) $42.85

Tachometer Cable - For Allis Chalmers tractor models D10, D12 (s/n 9000-earlier), Compatible with John Deere tractor models 1010, 2010, 5010, 5020, 6030, 7520, Compatible with John Deere Construction and industrial models 700 Replaces John Deere OEM number AT17503, AT12695, AT15420, AT15470, , Compatible with Oliver tractor models Super 66, 66, 660, Replaces Oliver OEM number 105117A, 1LS5231, Length: 43-1/8", (Item #: 122470) $31.50

Tachometer Drive Adapter - For Allis Chalmers tractor models D10, D12, D14, D15, D17, Compatible with Allis Chalmers Construction and industrial models I40, I600, Replaces Allis Chalmers OEM number 70228768, Length: 1.561", Key Width: .095", O.D.: .302", (Item #: 121558) $19.98

Tachometer Drive Threaded Nipple - For Allis Chalmers tractor models D10, D12, D14, D15, D17, Compatible with Allis Chalmers Construction and industrial models I40, I600, Replaces Allis Chalmers OEM number 70228769, Threads Into Govenor Housing Or Block, 3/4" 20 Pipe Thread - 7/8" 18 Pipe Thread, Length: 1.413", Zinc Dichromate Steel, (Item #: 121557) $20.00

Temperature Gauge - For Allis Chalmers tractor models D10, D12, D14, D15, D17, D19, WD45, Compatible with Case tractor models C, D, L, S, V, 200, 200B, 210B, 211B, 400, 410, 411, 412, 420, Compatible with Case Construction and industrial models 310, 420, Compatible with CockShutt / CO OP tractor models E3, E4, 20, 30, 40 (Blackhawk), 50 (Blackhawk), 550, 560, 570, Compatible with International tractor models C, Super C, TD5, TD6, TD9, 200, 230, 240, 300, 330, 340, 350, 400, 444, 450, 460, 560, 660, 2444, 3444, 3514, 3616, Compatible with John Deere tractor models A, B, D, G, H, M, R, 40 (Blackhawk), 50 (Blackhawk), 60, 70, 80, 320, 330, 420, 430, 520, 530, 620, 630, 720, 730, 820, 830, 840, Compatible with Massey Ferguson tractor models Super 90, TO35, 35 (Blackhawk), 40 (Blackhawk), 50 (Blackhawk), 65, 85, 88, 135, 150, 165, 175, 180, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40 (Blackhawk), 50 (Blackhawk), 60, 70, 80, 202, 203, 204, 205, 302, 304, 356, 406, 1001, 2135, 2200, 2500, 3165, Compatible with Massey Harris tractor models Colt, Mustang, Pacer, Pony, 20, 22, 30, 33, 44 (Special), 50 (Blackhawk), 55, 81, 82, 101 (Jr), 102 (Jr), 201, 202, 203, 303, 333, 444, 555 Replaces Massey Harris OEM number 21475A, , Compatible with Minneapolis Moline tractor models BG, Big Mo, G, GB, GTA, GTB, GTC, Jet Star, Jet Star 2, Jet Star 3, M5, M504, M602, M604, M670 (Super), M670 Super, R, RT, RTI, RTU, U, U302, UB (Special), UDLX, Z, 4 Star, Compatible with Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, Super 99, 60, 66, 70, 77, 80, 88, 90, 99, 440, 660, 900, 950, 990, 995, Chrome Bezel, Dash Mounted, No Logo, 90 Degree Pointer Sweep, Capillary Tube: 72" Long, Heavy Duty, Thread: 5/8"-18 UF, Pipe Bushing: 1/2" NPT, 110-230 Degrees, (Item #: 150686) $37.14

Traction Booster Gauge, Fully Functioning - WORKING booster gauge. For tractor models CA, WD, WD45, (D10 up to serial number 9199), (D12 up to serial number 9167), D14, (D15 up to serial number 9000), (D17 up to serial number 75000), D19. Replaces 228977, 226631, 70226631, 235598, 70235598, 70228977. (Item #: 103880, Ref: 70228977) $107.00

Water Temperature Gauge - This Water Temperature Gauge is used on Allis Chalmers D10, D12, D14, D15 Gas and Diesel, D17 Gas and Diesel, WD45 Diesel. It fits a 2 inch hole. The lead is 75 inches with a 5/8 inch18 U.F. end and a 1/2 inch NPT pipe bushing. It Replaces Original part numbers 226966, 228334, 229870, 231378, 235724, 70235724, 70231378. (Item #: 103878, Ref: R4014) $49.80

Hitch / Drawbar

Hitch Lift Rod - For tractor models D10, D12, D15. (Item #: 170314, Ref: 70235823) $63.00

Lift Arm Latch Coupler Spring - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, WD, WD45, 190, 190XT, Replaces Allis Chalmers OEM number 70235881, 70327360, 235881, 327360, Overall Length 3-1/4", (Item #: 126680) $6.30

Lift Rod Trunnion - For tractor models D10, D12, D15. (Item #: 162166, Ref: 70234884) $18.80

Lower Yoke Clevis - For tractor models D10, D12, D15. 10.63 inches overall length, 5/8 inch fork width, 1 inch 14 thread, 0.703 pin diameter. (Item #: 162981, Ref: 70235820) $60.00

Hydraulic System

Dipstick - For Hydraulics/Transmission. For tractor models CA, D10, D12, WD, WD45. (Item #: 126536, Ref: 224611) $31.10

Hydraulic Lever Knob - Plastic Knob, 3/8 inch fine thread. For tractor models D10, D12, 5020, 5030, 6140. (Item #: 126604, Ref: R4572) $5.50

Lights

Bullet Tail Light - This Bullet style Tail Light is for models B, C, CA, G, WD, WD45, D10, D12, D14, D15. Bullet Tail Light. 6 Volt with Glass Lense. Also available in 12 Volt, order PART R4383 Instead. (Item #: 105309, Ref: R4384) $48.50

Bullet Tail Light - 12 Volt - For B, C, CA, G, WD, WD45, D10, D12, D15. Bullet Tail Light. 12 volt with glass lens. Also available in 6 volt, order part number R4384 instead. (Item #: 105310, Ref: R4383) $48.50

Dash Light, Chrome, 12 Volt - For tractor models 170, D10, D12, D14, D15, D17, D19, D21, 175, 180, 185, 190, 190XT, 200, 210, 220, I-40, I-400, I-60, I-600. Replaces 230247, 234404, 70230247, 70234404. (Item #: 105311, Ref: 229203) $33.87

Headlight, 6 Volt - This 6 Volt headlight measures 4 3/4 inch diameter and has a 1/2 inch diameter stud for mounting. Single wire light. May come black or gray. For B, C, CA, G, D10, D12, D14. Headlight. This is a radiator mount for the D10, D12 and D14. For 12 Volt, order R4003 bulb. Replaces OEM numbers 210921, 210922, 70210921, 70210922. (Item #: 105306, Ref: R3997) $56.00

Headlight Bulb, 12 Volt - Bulb only. This is a replacement for the 6 volt bulb for the complete light we sell as part number R3997. Price shown is for each, sold only in multiples of 2 items. (Item #: 151842, Ref: R4003) $0.50

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: B, C, CA, RC, WC, WD, WD45, WF, (D10, D12, D14 early, with bulb style light), D15 up to serial number 9001. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 230232, 70232232, 70276858, 70230232. (Item #: 111241, Ref: 373662R91) $10.10

Light Switch - For tractor models (190, 190XT, 190XT III all serial number up to serial number 19000), D10, D12, D14, D15, D17. (Item #: 121149, Ref: 70234409) $8.10

Light Switch - Comes with knob. For tractor models D10, D12, D15, D17, D19, D21, 190, 190XT, 190XT III. Replaces 70235977, 70235976. (Item #: 114720, Ref: AA4667R) $16.60

Light Visor - This Light Visor is used on Allis Chalmers (D10, D12, D15 all Serial Number 9001 and up), D17 Serial Number 42001 and up, D19. Replaces: 236352, 70236352 (Item #: 126565, Ref: 534347M1) $14.30

Sealed Beam Bulb - Sealed beam bulb, 12 volt, 5-3/4 inch diameter. Trade number 4419. For tractor models 190, D10, D12, D15, D17. (Item #: 111228, Ref: 70230252) $14.70

Sealed Beam Bulb - Sealed beam bulb, 6 volt, 4-1/2 inch diameter. Trade number 4411. For tractor models D10, D12. Replaces 70232921. (Item #: 111227, Ref: L4511) $13.70

Sealed Beam Bulb - Red backed, work/tail light, 4-1/2 inch diameter. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 6040, 7030, 7050, D10, D12, D15, D17, D19, D21. (Item #: 116014, Ref: 70250301) $24.20

$Allis Chalmers D12 Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Item #: 150699, Ref: TLBULB12V) $0.50

Work Tail Light Assembly - 12 VOLT WOK LIGHT. For AC models: D10, D12, D14, D15, D17, D19, D21, 190, 190XT, 190XT III. (Item #: 124573, Ref: 70243313) $103.00

Miscellaneous

No
Picture
Brake Release Knob - For Allis Chalmers tractor models D10, D12, D14, D15, D17, Replaces Allis Chalmers OEM number 70230366, 230366, 72502132, 502132, 5/16" - 18 Thread, (Item #: 167872) $6.50

Dipstick - Hydraulic Oil, Used - For Allis Chalmers tractor models CA, D10, D12, WD, WD45, Replaces Allis Chalmers OEM number 70224611, For a new version of this item use Item #: 126536, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 440039) $20.01

Oil System

Oil Fill Breather Cap, NO Clip - 3-1/4 inches tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Fits over 1-1/2 inch pipe. Replaces OEM numbers 203196, 205298, 200267. (Item #: 110064, Ref: R4459) $28.10

Oil Fill Breather Cap, With Clip - 3-1/4 inches tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Replaces OEM numbers 203196, 205298, 200267. (Item #: 107000, Ref: R4458) $42.50

Oil Filter - Oil Filter Cartridge, threaded neck type can. For GAS engines on: B, C, CA, G, IB, RC, WC, WD, WF, WD45, D10, D12, D14, D15, (D17 prior to series IV serial number less than 24000) and others - verify part number. (Item #: 110866, Ref: 70240912) $22.30

Oil Filter, Spin On - Spin on style oil filter measures with dimensions of 5 13/32 inches in length, 3 11/16 inches O.D. Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Item #: 118399, Ref: E7NN6714AA) $14.20

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Uses EBU6734A washer, sold separately. Replaces 205060, 224994, 225585, 225657, 226408, 4026437, 74026437. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.60

Oil Pump Repair Kit - This Oil Pump Repair Kit includes: (2) 70207842 rotor blades, (4) 70207838 rotor blade springs, (1) 70223531 rotor blade shaft, (1) 70277273 body to block gasket, (2) 70207840 pump cover gaskets, fits B, C, CA, IB, RC, (2) 70228393 pump cover gaskets, fits D10, D12, D14, D15. Also contains (1) 70233390 oil pump spring retaining pin and (1) 70207839 pressure regulating Spring both used on B, C, CA, (D15 serial number 9001 and up), (H3 serial number 6001 and up), IB, RC all gas/LP. These two parts are NOT used on D10, D12, D14, (D15 prior to serial number 9000) or H3. Parts in this kit are items # 3, 4, 5, 6, 8, 11 and 12 in the image. Replaces: 207838, 207839, 207840, 207841, 207842, 207843, 223531, 228393, 233210, 233390, 277273, 70207838, 70207839, 70207840, 70207841, 70207842, 70207843, 70223531, 70228393, 70233210, 70233390, 70277273. (Item #: 167035, Ref: ACS3420) $166.00

Paint

No
Picture
Paint, Cream, 1 Gallon - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108324, Ref: TP270GAL) $65.00

No
Picture
Paint, Cream, 1 Quart - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108323, Ref: TP270QT) $33.70

No
Picture
Paint, Cream, Spray Can - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108322, Ref: TP270SP) $10.50

No
Picture
Paint, Persian Orange #1, 1 Quart - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108313, Ref: TP282QT) $23.30

No
Picture
Paint, Persian Orange, 1 Gallon - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108314, Ref: TP282GAL) $63.00

No
Picture
Paint, Persian Orange #1, Spray Can - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108312, Ref: TP282SP) $8.60

No
Picture
Paint, Persian Orange #2, 1 Gallon - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108317, Ref: TP285GAL) $51.00

No
Picture
Paint, Persian Orange #2, 1 Quart - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108316, Ref: TP285QT) $24.60

No
Picture
Paint, Persian Orange #2, Spray Can - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108315, Ref: TP285SP) $8.80

PTO / Driveline

PTO and Lift Shaft Housing Seal - PTO Outer Seal for 1 speed, 1 3/8 inch output shaft. This oil seal measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide For tractor models B, C, CA, D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 190XT III, 200. Replaces: 224810, 230608, 241779, 70224810, 70230608, 70241779 (Item #: 128541, Ref: 70241779) $7.70

PTO Seal - Seal for D10, D12, D14, D15, early WC before serial number 74330, early WF before serial number 1336. 1.375 inch inside diameter x 2.378 inch outside diameter x .312 inch width. (Item #: 116834, Ref: 359051R91) $11.30

Seats

Back Cushion, Wood Backing - This High Quality Back Cushion is on a wood backing. It is not exactly like the original. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces: 236460, 70236460 (Item #: 70236460W) $52.91

Back Rest Cushion on Steel - This Back Rest Cushion is restoration quality with powder coated steel backing. Cushions are embossed like original. High quality stitching. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces: 236460, 70236460 (Item #: 101195, Ref: 70236460-OE) $76.00

Seat Back - Black and White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178464, Ref: R4357) $228.00

Seat Back - Black and White Vinyl on Wood For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Item #: 178469, Ref: R0853) $88.00

Seat Back-MADE IN USA - Black and White Vinyl on Steel For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178461, Ref: R0851) $300.00

Seat Bottom - Black and White Vinyl on Steel For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178463, Ref: R0850) $306.00

Seat Bottom - Black and White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178465, Ref: R4356) $335.00

Seat Bottom - Black and White Vinyl on Wood. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Item #: 178471, Ref: R0852) $133.00

Seat Bottom Cushion - This Seat Bottom Cushion Restoration quality with powder coated steel backing. Cushions are embossed like original. High quality stitching. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces 236461, 70236461 (Item #: 178946, Ref: 70236461-OE) $285.01

Seat Bottom Cushion, Wood Base - This is a high quality replacement for Allis Chalmers D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). It has a wood base. Not exactly like the original. Replaces 236461, 70236461 (Item #: 179372, Ref: 70236461W) $103.00

Seat Cushion Set - This Black and white vinyl two piece cushion set is steel backed. Consists of R4356, R4357 plus the Seat Frame. Original style pleated covering. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. Replaces: 236318 (Item #: 178950, Ref: R4358) $558.00

Seat Frame - Used with two cushions on Allis Chalmers models: 170, 175, 180, 185, 190, 190XT, 200, 220, 7030, 7050, D10, D12, D14, D15, D17, D19 (Item #: 70243740PAN) $172.91

Seat Shock Absorber - Compatible with Allis Chalmers Tractors: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580. Replaces Allis Chalmers OEM nos 70227917, 227916, 227917, 70227916. Includes Shock, Spring, Retainers, Collar and Bushings. 11-3/4 iches center to center when extended, 8-1/8 inches center to center when compressed. (Item #: 105315) $112.00

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Sheet Metal / Body Parts

Battery Box - For D10 and D12. Rplaces OEM number 70233332. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103873, Ref: 70233332) $120.00

Side Panel - Left Hand For D10, D12. Replaces 70241771, 70231587. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104035, Ref: R4023) $52.00

Side Panel - Right hand for D10 (from serial number 3501), D12 (from serial number 3001). Replaces 70241770 and 70236019. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104034, Ref: R4024) $52.00

Toolbox - Fender mount, 15 inch x 5-1/2 inch x 3-3/4 inch. Fits WC, WD, WD45, D10, D12, D14, D15, D17. (Item #: 103875, Ref: 70228924) $57.00

Steering

Pinion Shaft Gear 2nd and 3rd - For Allis Chalmers tractor models CA, D10, D12, D14, D15, Replaces Allis Chalmers OEM number 70228291, 70225829, (Item #: 155082) $192.00

Seal - Seal with wear sleeve for tractors with dual front wheels, except HD axle, serial number 42001 and up. For tractor models 160, 170, 175, 180, 190, 190XT, 200, 6060, 6070, 6080, 7000, D10, D12, D15, D17. (Item #: 164159, Ref: 70235120) $13.80

Seal, Power Steering Pump Driveshaft - For tractor models D10, D12, D14, D15, D17, WD, WD45. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.30

Spindle Bushing - Used on spindle 70237434, on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 110538, Ref: 70211743) $12.80

Spindle Bushing - This spindle bushing is used on spindle 70237073 in models CA, D10, D12. Replaces: 205601, 70205601. (Item #: 100617, Ref: 2N3109) $3.60

No
Picture
Spindle Bushing - For Allis Chalmers tractor models CA, D10, D12, Replaces Allis Chalmers OEM number 70205601, Inside Diameter: 1.2550", Outside Diameter: 1.3790", Width: 1.25", (Item #: 173329) $15.00

$Allis Chalmers D12 Spindle, LH\RH$
Spindle, LH/RH - A=13.44 inch, B=1.247 inch, C=1.190 inch, D=.750 inch. For tractor models D10, D12. Uses Wheel Bearing Kit part number 70228459. (Item #: 104602, Ref: 70237073) $255.00

$Allis Chalmers D12 Spindle, LH\RH$
Spindle, LH/RH - This spindle measures A=12 inch, B=1.610 inch, C=1.500 inch, D=1.187 inch. For tractor models D10, D12, D14, D15, D17 early serial number with 5 bolt wheel. Uses wheel bearing kit part number WBKAC1. (Item #: 100090, Ref: 70237434) $286.00

Spindle Thrust Washer - For tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 111696, Ref: 70218762) $6.40

Spindle, Used - For Allis Chalmers tractor models D10, D12, D14, D15, D17 (early with 5-bolt wheel), Replaces Allis Chalmers OEM number 70237434, Right or Left Side, Dimension A: 12.000", Dimension B: 1.610", Dimension C: 1.500", Dimension D: 1.187", For a new version of this item use Item #: 100090, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400090) $160.01

Steering Wheel - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2 inch diameter, splined hub. Black Plastic with Covered Spokes. Diamond Center AC Logo available as part number R3996. Also replaces 232033. (Item #: 101405, Ref: 70232033) $62.15

Steering Wheel - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2" Diameter, Splined Hub. Creme Plastic with Covered Spokes. Diamond Center AC Logo Available as Part#R3996. Replaces 70233857, 70233851, 233851 (Item #: 101406, Ref: R3993) $60.00

No
Picture
Steering Wheel, Black - 17-1/2" diameter, splined, covered steel spokes. For tractor models D10, D12, D14, D15, D17, D19, D21. (Item #: 101405, Ref: 70232033V) $62.15

Steering Wheel Center Logo - For D10, D12, D14, D15, D17, D19, D21. CHROME Steering Wheel Center Logo used on 70232033 and 70233851 steering wheels. Replaces 70228474, 70233852, 70246724 (Item #: 101407, Ref: R3996) $22.70

Steering Wheel, Cream - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2 inch diameter, splined hub. Creme Plastic with Covered Spokes. Diamond Center AC Logo available as part number R3996. (Item #: 101406, Ref: 70233851) $60.00

Steering Wheel Emblem Decal - 1-1/2 inches x 1-1/2 inches Black and Orange on White decal. Used as a steering wheel emblem on later model that did not use the metal emblem. (Item #: R5167) $3.50

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Wheels

Bearing Cone - Outer Cone for front wheel bearings. Prior to 3000 and 9001 up. For tractor models B, C, CA, D10, D12. (Item #: 182875, Ref: 70209925) $9.70

Bearing Cone - Inner Cone for front wheel bearings. For B, C, CA, D10 (to 3500 and 9001 up), D12 (to 3000 and 9001 up). (Item #: 172510, Ref: 70209926) $9.40

Bearing Cone - Inner cone for front wheel bearings. For tractor models WC, WD, WD45, D10 (serial number 3501 thru serial number 9000), D12 (serial number 3001 thru serial number 9000), D14, D15, D17 (prior to serial number 42000). Replaces 2776. (Item #: 172835, Ref: 70222214) $18.90

Eccentric Pin Block, Used - For Allis Chalmers tractor models CA, D10, D12, D14, D15, D17, WD, WD45, 160, 170, 175, 180, 185, 190, 190XT, 6040, 6060, 6070, 6080, 6140, Replaces Allis Chalmers OEM nos 70220032, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430928) $13.26

Eccentric Pin Body, Used - For Allis Chalmers tractor models CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF, 160, 6040, Replaces Allis Chalmers OEM nos 70220756, For rail type power adjust rims, 12 Used with high clearance, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430531) $35.01

Front Rim - 15 inch x 3 inch. 5-Lug, For model B, C and CA. 2-3/4 Inch Pilot, 2 5/8 Inch Bolt center to center and 3 1/2 Inch Backspacing Replaces: 231520, 70231520 (Item #: 103753, Ref: R0089) $166.00

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $112.00

Front Wheel - 4-1/4 x 16, five bolt, 3 3/8 pilot hole and 3 inch bolt spacing center-to-center. For WC, WD, WD45, D10, D12, D14, D15, and D17. Not for use with front end loader. Replaces: 232832, 70232832 (Item #: 103755, Ref: R0088) $165.00

No
Picture
Front Wheel Bearing Kit - Kit containes one each: 70209925 (Cone), 70209984 (Cup), 70209926 (Cone), 70209983 (Cup). Kit repairs one wheel. For tractor models B, C, CA, D10 (to 3500 and 9001 up), D12 (to 3000 and 9001 up). (Item #: 121765, Ref: 70228459) $45.30

Front Wheel Bearing Kit - Front wheel bearing kit, 5 bolt hub. Kit contains one each: 15250 (Cup), 15118 (Cone), 2776 (cone), 2720 (Cup), 70235120 (Seal). Repairs one wheel. 42001 and up. For tractor models D10, D12, D15, D17.70247801 (Item #: 100098, Ref: 70228458) $49.80

Front Wheel Bearing Kit - Front wheel bearing kit. Tractors: D10 (serial number 3501 to serial number 9000), D12 (serial number 3001 to serial number 9000), D10, D12, hi-clearance (prior to serial number 9000), WC, WD, WD45, D14, D15 (prior to serial number 9000), D17 (prior to serial number 42000). This kit is for one wheel only. Kit contains 1 each of the following part number 15288A SEAL, 70209987 CUP, 70222214 CONE, 70209983 CUP and 70209926 CONE. (Item #: 100098, Ref: 70228458) $49.80

Front Wheel Lug Bolt - Used in many applications, this wheel stud has 1/2 inch - 20 NF thread, 1 inch thread length and 13/16 inch hex head. Used on Allis Chalmers 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, B, C, CA, D10, D12, D14, D15, D17, D19, G as rear rim lug bolt, WC, WD, WD45, WF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863. (Item #: 111560, Ref: 512581M1) $1.60

Front Wheel Seal Kit - For one wheel, contains one each of 70202103 retainer, 70202104 felt, and 70202105 metal washer. Tractors: RC, WC, WD, WD45, D10, D12, D14. Supersedes and replaces 228176 (Item #: 179127, Ref: 70208346) $17.90

Hub Cap - THIS CAP IS FOR HUBS WITH OEM number 70228897 ONLY. For tractor models (D10 serial number 3501 and up), (D12 serial number 3001-9000), D14, (D15 serial number up to 9001), (D17 series III serial number up to 42001), WD, WD45. (Item #: 104307, Ref: 70276819) $7.98

No
Picture
Lug Bolt, 9/16" 18 x 1.69", Used - For Allis Chalmers tractor models D10, D12, D14, D15, D17, WD, WD45, 170, 175, 180, 185 (rear), Compatible with Allis Chalmers Construction and industrial models I40, I60, I400, I600 (rear) Replaces Allis Chalmers OEM number 251815, 70251815, 225191, 70225191, , Compatible with Avery tractor models A (rear), BF, BG, R Replaces Avery OEM nos AT400, , Compatible with Case tractor models 200, 200B, 210B, 211B, 300, 300B, 311, 311B, 312, 400B, 410B, 411B, 430, 431, 441, 480 (rear, s/n 8325288), 500B, 510B, 511B, 530 (rear, s/n 8329560), 531 (rear, s/n 8329560), 540 (rear, s/n 8329560), 541 (rear, s/n 8329560), 580 (rear, s/n 8325288), 600B, 610B, 611B, 614B, 630, 640, 641, Compatible with Case Construction and industrial models 420 (rear), 420BD (rear), 430CK (rear), 480CK (rear, s/n 8325288), 530CK (rear, s/n 8329560), 580CK (rear, s/n 8325288) Replaces Case OEM nos 86628557, 030739HT, B18264, , Compatible with CockShutt / CO OP tractor models E3, 20 (rear), 20, 30 (rear), 30, 40 (rear), 40 (Blackhawk), 50 (rear), 50, 540 (rear) Replaces CockShutt / CO OP OEM nos FX07, , Compatible with Ford Construction and industrial models 2030, Compatible with International tractor models A (rear), B (rear, s/n 153375-earlier), B275, B414, Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, Super A, 100, 130, 140 (LH, rear), 240, 300, 330, 340, 350, 354, 364, 384, 404, 424, 444 (rear), 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2404, 2424, 2444, 3088, 3288 (front), Compatible with John Deere tractor models A (rear), B (rear, s/n 153375-earlier), G (rear, s/n 20277-earlier), H, M, 40 (Blackhawk), 420, 430, 435, 820, 830, 1010, 1020, 1520, 1530, 2010 (rear), 2020, 2030, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030 (front) Replaces John Deere OEM nos AA4173R, AT11920, JD16R, JD21, T21544, T23252, , Compatible with Massey Ferguson tractor models 135, 150, 165, 175, 180, 230, 235, 240, 245, 255, 265, 275, 285, 298, 375, 383, 390, 393, 398, 399, 1080, 1085, 1100, 1105, 1130, 1150, 1155, 2640, 2775, 2805, 3060, 3070, 3090, 3140, 3630, 3650 Replaces Massey Ferguson OEM nos 15597A, 518611M91, 519278M91, , Compatible with Massey Harris tractor models Pacer (16), Pony, 20, 22, 30, 33, 44 (Special), 81, 82, 101 (Jr), 102 (Jr), 333, 444 (rear), Compatible with Minneapolis Moline tractor models G1000, G1050, G1350, GB, GTB, Jet Star, Jet Star 2, Jet Star 3, R, U, U302, Z, 335, 445 (rear) Replaces Minneapolis Moline OEM nos 10A7573, , Compatible with Oliver tractor models Super 55, Super 77, Super 88, 60 (American), 66, 70, 77, 88, 550 (rear with stamped steel dish), 660, 770, 880, 1550, 1555, 1600, 1650, 1655 (rear with stamped steel centers), 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2155, 2255 (front), Compatible with White tractor models 2-70, 2-78, 2-85, 2-88, 2-105, 2-110, 2-135, 2-150, 2-155, Replaces White OEM nos 1H706A, 9/16" X 18 UNF thread, 1-1/8" long thread, 7/8" hex head, 45 degree taper, For a new version of this item use Item #: 108605, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435410) $1.38

Rear Rim, Power Adjust - 10 inches x 24 inches, 4 rail, double ramp clamp, holes in rail for stop body screw are parallel to axle not at angle. For tractor models CA, D10, D12. Additional $20 shipping due to the weight and size. (Item #: 103775, Ref: 70225184) $666.00

Seal Felt - Front wheel oil seal assembly. This front wheel seal is made of steel and felt. This Allis Chalmers front wheel seal measures : 1.437 inches inside diameter, 2.563 inches outside diameter. and 0.586 inches wide. For tractor models B, C, CA, D10, D12. Replaces 207362, 207363, 207364, 207365, 70207362, 70207363, 70207364, 70207365 (Item #: 121766, Ref: 70207365) $25.90

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims 535453M91, 535452M91, PAR10X28, C5NN1050J and C5NN1050H. Replaces: 218662, 225190, 70218662, 70225190, 70273627. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

Threaded Hub Cap, Used - For Allis Chalmers tractor models D10, D12, D14, D15 (s/n 9001-earlier), D17, WC (s/n 41388-later), WD, WD45, Replaces Allis Chalmers OEM nos 70206343, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431670) $23.76

No
Picture
Wheel Bearing Kit - Front Wheel Bearing Kit with 1.500 inch Inner Bearing I.D. For some WD, D10, D12, D15, Early D17 (Item #: 100098, Ref: R2820) $49.80

Wheel Bolt - This wheel bolt fits the following tractor models: D10, D12, D14, D15, D17, I40, I400, I60, WD, WD45, 170, 175, 180, 185, and I600. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part numbers: 225191, 251815, 70225191, and 70251815. (Item #: 108605, Ref: WB916) $2.30

Wheel Hub, 5 Bolt - Hub has overall dimensions of 6 1/4 inch diameter and 5.28 inch depth. For tractor models (D10 serial number 3501 and up), (D12 serial number 3001-9000), D14, (D15 up to serial number 9001), (D17 series III up to serial number 42001), WD, WD45. (Item #: 104303, Ref: 70228897) $70.00

Wheel Hub, Used - For Allis Chalmers tractor models D10 (s/n 3501-later), D12 (s/n 3001-9000), D14, D15 (s/n 9001-earlier), D17 (Series 3, s/n 42001-earlier), WC, WD, WD45, Replaces Allis Chalmers OEM number 70228897, Replaces Casting nos 32904R, Front Wheel Hub 5 Bolt, For a new version of this item use Item #: 104303, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404303) $44.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

AC Diamond Decal - Black and White, Milwaukee, 6 inches x 6 inches. Vinyl Cut. (Item #: 183055, Ref: R4634) $13.80

AC Diamond Decal - Orange Background, 5 1/2 inches x 5 1/2 inches. (Item #: 183122, Ref: R4633) $11.60

AC Diamond Decal - Black and White, 4 inches x 4 inches, Vinyl Cut. (Item #: 183053, Ref: R4632) $9.60

AC Diamond Decal - 1 inches x 1 inches orange, blue and gold printed on vinyl. (Item #: 183049, Ref: R5234) $2.50

AC Logo Decal - 1-1/2 inches x 8 inches, Black and Orange on White. (Item #: 100153, Ref: R0675) $3.40

AC Logo Decal - 3 inches x 18 inches, Black and Orange on White. (Item #: 100154, Ref: R0676) $8.50

AC Logo Decal - 24 inches long, Black and Orange. (Item #: 183479, Ref: R0677) $26.80

AC Logo Decal, New Style - 3-1/2 inches x 3-1/2 inches Black and Orange on White. (Item #: 100163, Ref: R5168) $3.40

AC Logo Decal, New Style - 4-1/2 inches x 4-1/2 inches Black and Orange on White. (Item #: 100152, Ref: R5169) $10.00

AC Logo Decal, New Style - 8 inches x 8 inches Black and Orange on White, printed on vinyl. (Item #: 183047, Ref: R5233) $22.90

No
Picture
Power Shift Decals - One pair, white. For the cab on some Allis models. (Item #: 183474, Ref: R0674) $26.80

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket For Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models (Item #: 105281, Ref: D4PE12029AA) $15.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

Spark Plug - Fits all models 1953 thru 1975 using 1/2" reach, 7/8" heck size. (Item #: 113918, Ref: AL3116) $4.90

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

NOTE

STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

$Allis Chalmers D12 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Allis Chalmers D12 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Allis Chalmers D12 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Allis Chalmers D12 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Allis Chalmers D12 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Allis Chalmers D12 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Allis Chalmers D12 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.75 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Item #: 114940, Ref: R7949) $9.50

$Allis Chalmers D12 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16) inch, four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H. Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Orange - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161192) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Allis Orange, 1 Quart - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100109, Ref: TP280QT) $23.30

No
Picture
Paint, Allis Orange, Spray Can - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100108, Ref: TP280SP) $7.80

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat, Air Suspension, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Universal - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Tie-On Seat Cover - Orange and White, 21 inches wide. Fits 19 or 21 inch wide pan seats. Deluxe with 2 inches of foam. (Item #: 179007, Ref: R1012) $58.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref: S.04352) $3.20

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00