Posted by Jim G on April 04, 1998 at 15:13:31:
In Reply to: Re: Trouble with 8N posted by Robert on April 04, 1998 at 10:07:49:
: : I am having trouble with my 8N.It can be hard to start,but usually will run.Lately it has a tendecy to just cut off in the middle of running.I am wondering if the timing chain is getting stretched or if it could be a carburator or distributor problem.Any suggestions on how to track it down?
: Remove hose on inlet side of carb, when the motor
: starts to die give it a little shot of starting fluid,if it picks up and
: runs better,you have a fuel system problem. Has it been
: converted from 6V to 12volt? If you are running 12v
: make sure you have a 12v coil with built in resistor
: or a resistor between the hot wire going to the coil
: and the coil.
Robert, 12 volt coils do not have a "built in" resistor. The resistor for these coils is built into the wiring harness, as oppossed to a external resistor.