Tractor Talk Discussion Board |
Re: Digital Camera Advice OT.................maybe
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Rod (NH) on February 23, 2005 at 12:56:59 from (64.140.200.138):
In Reply to: Re: Digital Camera Advice OT.................maybe posted by Coloken on February 23, 2005 at 12:20:16:
I fully agree. The emphasis on pixel size is way overblown for most users. For posting on the net or for viewing on your screen, 640x480 resolution (<1/3 megapixel) is entirely adequate. In fact, 640x480 should be considered the maximum resolution for posting on the net unless you 1) enjoy making others scroll all around to see your entire picture, 2) hate people with only dialup access and like to punish them or 3) want bragging rights about "bigger is better". I have found that a 640x480 native picture will even print out quite well at 4x6. A 2 or 3 megapixel picture will print out very well at 8x10. Not many non-pros will print out bigger than 8x10 (or even have a printer that can do it). Unless you make a habit of looking at your prints with a magnifying glass, there is no real advantage for most to go bigger than 2 or 3 megapixel. The only advantage to bigger that I can see is if you want to crop and blow up the crop - in essence to increase your "effective" zoom capacity. As far as brand - it's a chevy vs ford peeing contest. Features and "usability" are more important. Some of the cameras have such small buttons that people with relatively large hands have some difficulty using them. Rod
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|