Continuing what everyone else wrote, the big deal with detergent/non-detergent oil is the sludge. Non-detergent oil does not keep the engine carbon in suspension, so it settles out like shoe polish at the bottom of the oil pan. Detergent oil does not allow the carbon (basically graphite) to settle out. So, there is some risk that if you have a lot of carbon sludge, then it could get mixed into the oil if you suddenly put non-detergent oil in there. I am not sure how big of a deal this is, but if you detect sludge like Janicholson described, I would drop the oil pan and scrape it out clean, do an engine flush with diesel fuel, a filter change, and then run only modern detergent oil from then on. I did this on my IH "A," and discovered probably 2-3 inches of muck, along with a well-preserved bumblebee from half a century ago, etc. Your tractors are probably due for it, and would thank you if they could talk.
The old engines originally used single-weight non-detergent oil since it was the only oil available. Now it is time for modern oil, modern anti-freeze, modern grease, etc. Some hydraulic systems, gas turbines, and other systems still use non-detergent, but those are very different applications.
The oil labelled "lubricating oil" you describe is probably non-detergent oil. I've attached a link to some options. You could use the "lubricating oil," but it will cost you more, both in terms of $$ and wear on the engine from reduced effectiveness. Good luck. Dave
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Cockshutt Tractor - by Danny Bowes (Dsl). The son of a very successful Toronto and Brantford, Ontario merchant, and himself quite an entreprenuer, James G. Cockshutt opened a business called the Brantford Plow Works in 1877. In 1882, the business was incorporated to become the Cockshutt Plow Company. Along with quality built equipment, expedious demand and expansion made Cockshutt Plow Works the leader in the tillage tools sector of the farm equipment industry by the 1920's.
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
