Murray Hebblethwaite
Member
In this first photo Mr. Murray was welding quarter inch structural material. On the left was the first weld, you can see there was NOT quite enough heat, but on the right it is much better, NOT PERFECT, but far better than anyone could do in this ONE HORSE TOWN!
Keep in mind I self-taught myself to weld aluminum, in this second picture there is a horizontal weld connected with a vertical weld on one-eighth material. I used a piece of plywood as a background to make a contrast to high-light the fore-ground, the deck of this trailer is ALL ALUMINUM EXTRUSIONS!
The third picture shows my inclined weld where I attached my prefabricated one-eighth material fenders to my ALL ALUMINUM HOME-MADE UTILITY TRAILER!
Keep in mind I self-taught myself to weld aluminum, in this second picture there is a horizontal weld connected with a vertical weld on one-eighth material. I used a piece of plywood as a background to make a contrast to high-light the fore-ground, the deck of this trailer is ALL ALUMINUM EXTRUSIONS!
The third picture shows my inclined weld where I attached my prefabricated one-eighth material fenders to my ALL ALUMINUM HOME-MADE UTILITY TRAILER!