I tried to post earlier, but it didn't show up. Basically I have acquired a 1986 Chevy k10 with a 305 for use in the hunting woods / around the farm. It runs a little rough, but strong. I suspect it needs a carburetor and I know it needs an exhaust manifold. I started to dig into some repairs under the hood and my gosh, the vacuum lines and emissions crap!
Can I just replace the smog exhaust manifolds with headers and use an edelbrock intake / 600 cfm carb that I already have and still have some of the creature comforts (cruise, inside ac / heater controls, etc) functional? Any help will be appreciated.
John
Can I just replace the smog exhaust manifolds with headers and use an edelbrock intake / 600 cfm carb that I already have and still have some of the creature comforts (cruise, inside ac / heater controls, etc) functional? Any help will be appreciated.
John