I have a 5ft 3 point disc with the scalloped blades. When I use a turning plow and follow with the disc, it barely even disturbes the surface of the fresh dirt.
I seen where people say to set it up but here"s my question.
Can I use a piece of chain for the top link that would allow the disc to travel say 10-15 degrees above and below level. The lower arms would still do all the pulling but the disc would be able to follow the contours better?
I have the two rows angled opposite ><, but don"t get much out of it.
Brian
I seen where people say to set it up but here"s my question.
Can I use a piece of chain for the top link that would allow the disc to travel say 10-15 degrees above and below level. The lower arms would still do all the pulling but the disc would be able to follow the contours better?
I have the two rows angled opposite ><, but don"t get much out of it.
Brian