baled the 2nd cut today.

rustred · Sep 28, 2021

give the 660 its first work out on the baler have to break it in easy before it gets on the deep tillage tommorrow. even the cheap old junky 855 baler did the job after a bit of tinkering. had to sharpen the knives turn and the other one around the right way. sure beats that old 851 , even if this thing did have a hard life. but it was cheap. so worked ok S.V.

SVcummins · Sep 28, 2021

You will like that baler a thousand times better than the old 851. It will make a nice tight bale and it will wrap the twine a lot better and tighter . Looks like its doing a good job .

baled the 2nd cut today.

rustred

Well-known Member

SVcummins

Well-known Member

Similar threads