I'm goign to be putting in a pole barn but after reading some other posts, realized I have some questions.
My plan was to keep it cheap, cinder blocks for the perimeter, 14' poles 4' into the ground, packed gravel floor with maybe some plywood down. Was going to go sliding on the front, vertical doors on the side.
Overall size will be approximately 20x40, but due to space constraints it will be tapered, so 25' on one end, 15' on the other. Just tall enough to get 4-5 tractors in. Workshop is seperate, a 12x24' that is about 15' away.
I'd love some advice, I was just planning it as I go. Concrete base is not in the budget at the moment
My plan was to keep it cheap, cinder blocks for the perimeter, 14' poles 4' into the ground, packed gravel floor with maybe some plywood down. Was going to go sliding on the front, vertical doors on the side.
Overall size will be approximately 20x40, but due to space constraints it will be tapered, so 25' on one end, 15' on the other. Just tall enough to get 4-5 tractors in. Workshop is seperate, a 12x24' that is about 15' away.
I'd love some advice, I was just planning it as I go. Concrete base is not in the budget at the moment