(800) 853-2651
SHOP NOW

Fuel filters for a 684 IH

R

RossJones121

New User
i need some help on this fuel system. My tractor was running
Fine before the front steering cylinder had to be repaired. I thought I might as well change my fuel filters while it was down. What a mistake! I put the new filters in and of course they leak and I can't get my tractor to start now! Please tell me what to do. My cylinder is rebuilt and back on. I just can't
Get the darn thing started!

Ross
 
If you have the fuel filters with the glass bowls you can change them over to spin on filters and you will have to bleed out the air to the pump
 
(quoted from post at 13:16:57 12/12/14) If you have the fuel filters with the glass bowls you can change them over to spin on filters and you will have to bleed out the air to the pump
Click to expand...

I do have the glass bowls, where do I get the spin on ones and how do I bleed the air out of the line. Is it the bleed screw on top of the filter housing?
 
Hi Ross, did you change the filter O-rings?
If you did make sure you got all the old bits
of the O-ring out of the groove. Also do not
over tighten the filter bolt or you will crack
the glass bowl.

There is a bleed screw on top of each filter
housing.
Bleed filter closest to fuel tank first then
bleed the next filter. Put STOP/START/RUN lever
in the START position then try to start engine
after bleeding. If the engine will not start
then loosen an injector line at the rear of the
injector pump and try to start engine.
JimB
 
I changed mine over to spin-on. I had trouble with
the old ones either leaking or breaking. I got the
kit from my Case-IH dealer.About $180 I think.
 
It is leaking because either you didn't get the old gasket all out. Or the gasket is not setting right on the top of the glass bowl or top of the filter.
After you bleed out the air on the filters there is a bleeder on the top of the pump. Loosen then wait for the fuel then tighten back up. Should start right off.
We have a 574 with spin on filters and a 674 with the old glass bowls. We made aluminum bowls for the filters after one broke. Solved that problem.
 
my 684 has fleet guard filters my dads 895 has cih filters. about 30-35 years ago one of the bowls broke while planting corn .tractor was just sitting ideling in the yard . ih dealer didnt have any bowls so he gave me the spin ons dont remember the kit but was an easy fix was back planting by same day
 
(quoted from post at 20:30:00 12/14/14) my 684 has fleet guard filters my dads 895 has cih filters. about 30-35 years ago one of the bowls broke while planting corn .tractor was just sitting ideling in the yard . ih dealer didnt have any bowls so he gave me the spin ons dont remember the kit but was an easy fix was back planting by same day
Click to expand...

Thank you all for your help, I just gotta bleed the air out of the lines and I think I will be good to go. Trying to find where I can get the spin on assembly so I can change that immediately. Glass bowls are a pain!

All you of you have been a great help!

Ross
 
(quoted from post at 07:31:40 12/15/14)
(quoted from post at 20:30:00 12/14/14) my 684 has fleet guard filters my dads 895 has cih filters. about 30-35 years ago one of the bowls broke while planting corn .tractor was just sitting ideling in the yard . ih dealer didnt have any bowls so he gave me the spin ons dont remember the kit but was an easy fix was back planting by same day
Click to expand...

Thank you all for your help, I just gotta bleed the air out of the lines and I think I will be good to go. Trying to find where I can get the spin on assembly so I can change that immediately. Glass bowls are a pain!

All you of you have been a great help!

Ross
Click to expand...

Does anyone know where I can get the fuel assembly that will allow me to get the spin on fuel filters. IH/Case says they don't make them anymore.

Thanks in advance

Ross
 
You must log in or register to reply here.

Similar threads

G
IH 3500A Fuel problems
Replies
8
Views
541
grounder
G
L
No start after fuel filter change IH 656 Roosa Master
Replies
5
Views
263
Dieseltech
D
M
White 2-105 Crank no start
Replies
12
Views
760
used red MN
U
M
Massey 285 dies after running an hour?
Replies
4
Views
358
Janicholson
Janicholson
O
Massey 1100 Front Hydraulic Filter
Replies
12
Views
591
harhal
H
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top