New clutch

David G · Aug 13, 2012

I am putting the MH 44 back together that my dad had. The clutch shows some wear, but the pressure plate still has cross hatching on it.

OK to put in new clutch, bearings and leave plate? It never had a clutch issue and I do not know how old it is.

Bob Bancroft · Aug 13, 2012

Certainly.
I would just check the pressure plate and make sure it's not warped.

RodinNS · Aug 14, 2012

Yeah, PP should be fine as long as everything is free on it and the springs aren't buggered... I'd also be inclined to reuse the disc as well if the splines are good and it's got 1-8"-3/16" of lining above the rivets. I'm assuming that this thing is not going to clock up thousands of hours anymore....

Rod

New clutch

David G

Well-known Member

Bob Bancroft

Well-known Member

RodinNS

Well-known Member

Similar threads