trying to identify tractor

Anonymous-0

Well-known Member
My husband came across the following tractor and we are having a heck of a time identifying it.

On the top of the gear case there is a "T60". On the main frame there is a "T3A"

There is a steering wheel that uses a chain drive. There were several implements that came with the tractor.

The tractor has 2 main wheels with a shaft coming off the rear. There is a tractor seat mounted on a single small wheel that fits into this shaft - but almost seems like the tractor would 'push' rather than pull. (this is a guess on my part)

Any help you could give on figuring out what this is would be greatly appreciated!

I was trying to upload photos but since I am not a member I cannot do so - please email at [email protected] and I will send pictures.

Thanks!
 
Kristina does the tractor have the engine over the drive wheels? Do the implements mount under the frame between the drive wheels and the steering wheel? There were several tractors that used some version of this layout. One of them was the Square Turn tractor manufactured in Norfolk Nebraska. Try looking up Square Turn to see if this is it.
I hope this helps
John Schoenauer
 
1071.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top