Fordson F Front Wheel Bearings

Bryant Besse

New User
Does anyone know what the current item numbers are for the inner and outer conical bearings and cups For the front wheels on a Fordson F. I have tried searching and cannot get any results. Timken or any other company?
 
S101, S102 ,S103 and s104 are the numbers of the original Fordson stock inner and outer bearings and race . I get confused which is race
and which is bearing. Need two of s101,s102 , and two s103 ,s104 might have those mixed up.

Is that what you need ? I

If not you need to go to timkin catalog for taper roller bearings and input measurements . To find there conversion.

Been six years since I did this ,and I can use a refresher .
 

Thanks for the reply. I do have a Fordson Parts Book for my 1920 Fordson. Trying to find a current part number. I guess i will have to get the calipers out and take some accurate measurements and start the search. If anyone has recently purchased new front tapered roller bearings for a Fordson F a response would be much appreciated. Fordson house has them but no numbers of course and the price is more than I paid for the whole tractor.
 
I think I read that all Fordson wheel bearings from 1928-1964 are interchangeable. Might also go back to
the Model F. I can't vouch for that. When Ford closed down the US factory, the designs were shipped to
Ireland, and the numbering system may have changed. Since Allis Chalmers stepped into the market spot vacated
by Ford, I would wonder if the wheel bearings on the Model U would be similar. Someone with a Timken catalog
should be able to find a set with same OD and ID. A spacer may need to be made.

The following parts diagram is for reference
cvphoto141807.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top