Dearborn loader

I read the posting about the loss of manuverability. If it is one of those that mounts to the rear under the fenders and then to the center of the case then you should not have a mobility problem. Just watch the control arms when the bucket is lowered. They will actually bend pretty easy (not a good thing since steering is kind of important). If the loader hits them on the way down you may be able to spread the arms out a bit to prevent it from hitting. If it is one that mounts from the rear to the front axle you will most likley lose mobility (enough to notice but not enough to keep you from using it). Since these are mounted outside the control arms you usually wont have an issue with them hitting. (Watch them the first time anyway) Good luck