(800) 853-2651
SHOP NOW

Case 580c transaxle.

B

Bfinney5238

Member
Guys is my transaxle rebuildable? This picture is the front
part of it. The gears are all busted and the housing where
the bearing rides on is pretty gulled up. I havent pulled it
off the backhoe yet. Is it worth trying to fix or look for a
replacement.

cvphoto161866.jpg
 

Use the online parts book to find the part number of the pieces you need. When you click on a part number in the list, info on that part generally opens. On that page you will likely see the word Fitment. Click on that and it will show you other models that used the part you are looking for. Here is a link to the parts book.

https://www.mycnhistore.com/us/en/c...ckhoe/cn/BED06496-EFBE-E111-9FCE-005056875BD6

Here is an example, I don't know if it is the housing you need, you will need to find the right one to start as there are options to pick from.

mvphoto109069.jpg
 
What we're looking at is the counter shaft, the other end of it meshes with the differential ring gear, more than lightly that will be damaged too, the picture shows that the bearing cup is still in the housing, so the housing should be OK, hope the back one is the same, you may as well look for the whole axle as I doubt if anyone that has one would want to sell the gears you would want and be left with the housing, buy new from Case you best have a spare kidney to sell, all the 580 series have that transaxle from the C to the early K's the later K's had Carraro axles, have a look at the dismantled machines on Machinery Trader at the link below.
AJ
https://www.machinerytrader.com/listings/dismantled-machines/case/580c/construction-equipment
 
Im gonna pull it out. I just installed and rebuilt a 188 in it. Runs great. If I would have known the transaxle was screwed up I would have passed. Im gonna look for another one. In the mean time Im gonna go ahead and pull it apart. See how the inside looks. Sucks. I dont have 20 hours on the hoe.
 
Thats good to know. So all the way to the early K transaxle
will bolt up? I dont have to just look at C models? I looked it
up on the parts catalog but it says only will interchange with
the model C.
 
Yes, I am taking it this machine is a power shuttle as they did a manual shuttle as well, by the picture it's a power shuttle a manual shuttle the engine would have to be removed, the shuttle and range box to get back that far.
AJ
 
You must log in or register to reply here.

Similar threads

B
Case 580 transaxle interchangeability
Replies
1
Views
207
cumminstinkerer
C
J
Massey Ferguson Transaxle ID questions
Replies
2
Views
431
jshea132
J
J
4020 PTO Countershaft idler pin snapped
Replies
14
Views
511
tim s
T
J
Case 900 tractor hydraulics
Replies
1
Views
162
bradley martin
B
E
Case 580c won't engage forward shuttle until high rpms
Replies
2
Views
211
Sam Womer (PA)
S
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top