FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Oliver 1600 Parts

Category: Steering

[Categories] [All 1600 Parts] [All Oliver Models]

Char-Lynn, Oliver Power Steering Conversion Kit - For Oliver tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1800, 1850, 1900, 1950, 2050, 2150, Used to convert Saginaw to Char-Lynn (5.9ci motor), Motor requires 4 gpm (minimum) to 8 gpm (maximum), Priority Flow Divider recommended to supply motor with 4 gpm (not included), Pump and hoses not included, (Item #: 111645) $1750.00

Jam Nut - For the following tractors: 100, 120, 125, 1355, 145, 1555, 1600, 1655, 170, 1750, 1755, 1800, 1850, 1855, 195, 1955, White 100, White 120, White 125, White 145, White 170, White 2-110, White 2-135, White 2-150, White 2-155, White 2-180, White 2-70, White 2-88, White 2-105 with serial number below 255216, White 2-85 with serial number below 263341. Replaces 72161733. (Item #: 105123, Ref: 192928M1) $8.40

Jam Nut - For Oliver tractor models 1355, 1555, 1600, 1655, 1750, 1755, 1800, 1850, 1855, 1955 Replaces Oliver OEM number 164370A, , Compatible with White tractor models 2-85, 2-88, 2-105, 2-110, 2-135, 2-150, 2-155, 2-180, 100, 120, 125, 145, 170, 185, 195, Compatible with White Construction and industrial models 2-63, Replaces White OEM number 303117065, (Item #: 105244) $8.60

Spindle - For Oliver tractor models 770, 880, 1550, 1600, 1650, Vertical Length: 13-3/8", Shaft Diameter: 1-5/8", Spline Diameter: 1-5/8", Seal Diameter: 2.188", Inner Bearing Diameter: 1.625", Outer Bearing Diameter: 1.250", (Item #: 120118) $229.00

Spindle Thrust Washer - For Oliver tractor models 77, 88, 770, 880, 1550, 1555, 1600 (s/n 147569 - later), 1655 (s/n 147569 - later), 1750 (s/n 180537 - 201090), 1850 (s/n 150421 - 169758), Replaces Oliver OEM number K727, (Item #: 115285) $10.90

$Oliver 1600 Spindle, RH\LH$
Spindle, RH/LH - Measures A= 16.250", B= 1.50", C= 1.625", D= 1.250". For tractor models 1550, 1555, 77, 770, 88, 880, (1600, 1655 SN# 147569 and up), (1850 SN# 150421 to 169758), (1750 SN# 180537 to 201090). Replaces KS713A, 161341A. The wheel bearing kit used on this spindle is kit part number WBKWH4. (Item #: 102697, Ref: 161340A) $267.00

Steering Arm, Center - Has 10 spline hole, top tie rod hole is .640 inch, bottom tie rod hole is .750 inch. From center of splined hole to a line between the center of tie rod holes is 5.25 inches. For tractor models (1550, 1555, 1650 all with adjustable axles), (1600 with adj. axles SN# 124420 and up), (1655 adj axles narrow tread SN# 147569 and up), (1750 adj. axles narrow tread SN# 180537 and up), (1755, 1855 adj. axles marrow tread SN# 220000 and up), (1800 adj. axles SN# 115377 and up), (1850 adj. axles SN# 150421 to 168127), (White 2-62 with adj. axles SN# 160000 to 168915). (Item #: 105235, Ref: 107010A) $273.00

Steering Arm, Center - Has 10 spline hole, top tie rod hole is .740 inch, bottom tie rod hole is .640 inch. From center of splined hole to a line between the center of tie rod holes is 5 inches. For tractor models 1550, (1555 with 10 spline shaft), 1600, 1650, 1750, 1755, 1800, (1850 regular tread SN# 168128 and up), 1855, 1950, 1950T, (1955 with 10 spline shaft). (Item #: 102715, Ref: 161424A) $362.00

Steering Arm, Center - This is the same as 161424A except tapered holes are drilled from opposite direction, .640" dia at top of hole and .740" dia at bottom of hole. From center of splined hole to a line between the center of tie rod holes is 5 inches. For tractor models 1550, (1555, 1955 with 10 spline shaft), 1600, 1650, 1750, 1755, 1800, 1850, 1855, 1950, 1950T. (Item #: 102716, Ref: 161424SPL) $389.00

Steering Arm, Center - For tractor models (1555, 1600, 1655, 1750, 1755, 1850, 1855 wll with wheatland axles). (Item #: 105236, Ref: 303106772) $142.00

Steering Shaft - 9.160" long, 10 spline. For tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, (White 2-62, White 2-78, White 4-78 all industrial). Replaces 155800A, 107009A. (Item #: 105229, Ref: 303110311) $179.00

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.00

Steering Wheel - 18" diameter, 13/16"-7/8" keyed, 3 covered steel spokes. For tractor models Super 55, (70 late), 77, Super 77, 88, Super 88, 550, 660, 770, 880, (1600, 1650, 1800 with manual steering). (Item #: 101468, Ref: HB767C) $54.00

Steering Wheel - For Super 55, 550, 1600. Steering Wheel, 18" Diameter, covered spokes, 11/16" splined hub. (Item #: 101469, Ref: 1E767) $54.00

Steering Wheel Cap - Black Face for manual steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Item #: 101472, Ref: 101431AA) $45.90

Steering Wheel Cap - Black Face for power steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150 (Item #: 101474, Ref: 101432AA) $44.50

Steering Wheel Cap - White Face for manual steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Item #: 101471, Ref: 101431A) $41.80

Steering Wheel Cap - White face for power steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Item #: 101473, Ref: 101432A) $40.90

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Super 55, Super 66, Super 77, Super 88, Super 99, 1555, 1600, 1650, 1750, 1850, 1800, 1900, 550, 60, 70, 80, 66, 660, 77, 770, 88, 880, 90, 950, 99, 990, and 995. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 915090, 72162485, and S170. (Item #: 157780, Ref: 353435X1) $1.00

Steering Wheel, Keyed Hub - 3 spoke (covered). 18" diameter, 7/8" - 13/16" tapered shaft. For tractor models Super 55, 550, Super 66, 66, 660, (late 70 SN# 243686 and up), 77, 770, late 80, 88, 880, Super 77, Super 88, 1550 Rowcrop, 1555 Rowcrop, White 2-62, 1600, 1650 and 1800 (with manual steering), 99 and Super 99 (replaces 4 spoke wheel with 3 spoke). (Item #: 101468, Ref: 1B767C) $54.00

Tie Rod Assembly - For tractor models 1555, 1600, 1655, 1750, 1755, 1800, 1850, 1855, 1955, White 2-70, (White 2-105 SN# 255216 TO 271913), (White 2-85 SN# 263341 TO 271719), 1650. Replaces 662201. (Item #: 102700, Ref: 164210AS) $65.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 1600 Parts] [All Oliver Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy