FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 230 Parts

Category: Gauges

[Categories] [All MF230 Parts] [All Massey Ferguson Models]

Fuel Gauge - For tractor models (20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 260, 265, 275, 285, 290, 298, 30E, 40E, 50B, 50D, 50E, 50F, 550, 565, 575, 590, 595), (2620, 2640, 2680, all with serial number <271212), 50, serial number 87500>. Fuel Gauge. 2 inch body diameter. Replaces 1877717M92, 1877717M93 (Item #: 104118, Ref: 1877717M92) $23.20

Fuel Sending Unit - Fits Massey Ferguson 20C (serial number < 9A349236), 30B, 30D, 230, 235, 245, 285 (serial number < 9A289234). Replaces 530960M91, 1079384M91. (Item #: 119746, Ref: 1079384M91) $40.00

Fuel Sending Unit - This is a 5 hole fuel gauge sending unit. It is used with 1672762M91 Tank. Replaces original part number 001514U91, 1661794M92 (five hole) (Item #: 161572, Ref: 001514U91) $41.90

Sending Unit Gasket - This Fuel Sender Gasket is used on Massey Ferguson Tractors: 135, 150, 230, 235, 245, 202, 204, 2135, 2200, 4500, 20C, 2500, 30B, 35, 50. All with Continental engines. Used with 189160M91 sending unit. Replaces original part number 189605M1. The dimensions of this rubberized cork gasket are:1.715 inch inner diameter, 2.850 inch outside diameter, 0.191 inch thick, and there are five (5) � inch screw holes. Replaces 1015335M1, 101611A, 10A29269, 10A7362, 10A9818, 158046A, 189605M1, 189605M2, 189605M3, 239789, 241522, 29-12, 30-3048772, 369154R1, 70140C1, 70239789, 70241522, A11822, A61161, F2418R, R27181 (Item #: 165414, Ref: 189605M1) $3.10

Tachometer - For tractor models . Replaces 187718M92. Uses 26 inch drive cable part number 1699381M92. (Item #: 104130, Ref: 1674638M92) $34.00

Tachometer Cable - Tachometer cable assembly, 23 inch. For tractors: MF135 Perkins Gas and Diesel, MF230 diesel to serial number 9A349238, MF245 diesel except Orchard, MF255 with A4-203 diesel Industrials: 20, 20C diesel Turf to serial number 9A349236, 40B, 2135. (Item #: 104132, Ref: 508231M91) $14.00

Tachometer Cable - 23 inches long, 7/8 inch drive end, 5/8 inch load end. Verify length. Replaces 1853233V1, 827855M1, 827855V1, 828033M92, 882539M91, 882539V91, 890232M91, 890460M91. (Item #: 104132, Ref: 41092S) $14.00

Tachometer Cable - 27 inches long, 7/8 inch drive end, 5/8 load end. Replaces 1699381M91, 828033M92, 967572M1, 828033M1, 1850699M2, 1850700M1, 1851825M1, 882539M1, 882539M91, 890232M1, 890232M91, 890420M1, 890460M91. For tractor models 20B, 20D, 20E, 20F, 30E, 40, 135 UK, 230, 240, 250, 35, 550 UK, 590, 65, 765. (Item #: 104133, Ref: 1699381M92) $18.40

No
Picture
Tachometer Cable - Tachometer Cable 44 1/4 inch Total Length. Used on MF180 (PERKINS GAS, CONTINENTAL GAS S/N 645003160->, MF230, MF235 (Gas), MF245. Please check size before ordering. (Item #: 513044M91) $43.79

Tachometer Cable - For Massey Ferguson tractor models 180, 230, 245, Replaces Massey Ferguson OEM number 513044M91, Length: 44-1/4", (Item #: 121523) $54.00

Tachometer Drive Adapter - This Tachometer (Tractormeter) Drive Connector is used with 731208M1 Tachometer Drive Housing in Perkins 152 CID 3 Cylinder Engines and Perkins 203 4 cylinder. It Replaces Perkins 33473106. Replaces Massey: 735889M1 (Item #: 169993, Ref: 33473106) $8.90

Tachometer Drive Housing - This Tachometer is used on Perkins 152 cubic inch, three cylinder engines. Fits models 135, 150, 230, 235, 240, 245, 250, 20, 203, 205, 2135, 2200. 154-4, 20C, 2500, 254-4, 30B, 30D, MF 35, MF 40, MF 50. Uses 63676M1 seal, 731209M1 gasket and 33473106 tachometer drive adapter (each sold separately). It Replaces 37416751 and 731208M1. (Item #: 179633, Ref: 731208M1) $15.00

Tachometer Drive Housing Gasket - This Tachometer Drive Housing Gasket is used with 731208M1 Tachometer Drive Housing. It is used on Perkins 152 CID 3 cylinder engine. It replaces 731209M1, 36862511 (Item #: 178131, Ref: 731209M1) $2.30

Tachometer Drive Housing Seal - This Tachometer Drive Housing Seal is used with 731208M1 Tachometer Housing on Perkins 152 CID 3 Cylinder and 203 4 cyllinder Engines. It replaces 636762M1, 72080025, 63676M1 (Item #: 169991, Ref: 636762M1) $3.40

Tachometer Housing Kit - This Kit contains one each of: 731208M1 Tachometer Drive Housing, 63676M1 Seal, 731209M1 Gasket and 33473106 Tachometer Drive Adapter. It is used on Perkins 152 CID 3 Cylinder Engines. (Item #: 183588, Ref: B2830) $30.00

Universal Parts and Accessories
Category: Gauges

Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. (Item #: 182559, Ref: AMG60) $15.30

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch -24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Item #: 121625, Ref: UNI523) $33.00

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Item #: 178134, Ref: IHS626) $14.90

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Item #: 101927, Ref: SSW0002) $19.10

Temperature Gauge - Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Item #: 186993, Ref: 1042944) $26.60

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Item #: 178102, Ref: UTG50) $22.50

Temperature Gauge, Universal - Heat Indicator for 2 inch mounting hole. Complete assembly with bracket and adaptors. Numeric Face. 70 inch metal wrapped capillary line installs in block, head or hose. Dial calibrated to 250 degrees. Fits all liquid cooled engines. (Item #: 178124, Ref: UTG25) $20.30

Three Gauge Cluster - This universal set includes a Temperature Gauge, Amp Gauge and Oil Pressure Gauge in a chrome bezel. Gauges can be rotated in the bezel to mount a various angles. -60 to 60 Ammeter, 0 to 80 Oil Pressure, 100 to 220 Water Temperature (Item #: 134029) $32.00

Voltage Gauge - Reads 8-16 volts. Fits 2" diameter hole. Lighted. Two post mounting bracket. Black background. (Item #: 101928) $19.70

Voltmeter, 12 Volt, Lighted Dial - Voltmeter-Gauge has 8 volt to 16 volt range, lighted dial, fits 2 inch diameter hole. For tractors that use 12 volt electrical system. Chrome bezel with black background, white letters and white pointer. (Item #: 178013, Ref: VOLT12LT) $45.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Gauges

[Categories] [All MF230 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy