FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 35 Parts

Category: Electrical System

[Categories] [All MF35 Parts] [All Massey Ferguson Models]

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Alternator with Tach Drive - This is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. Tach drive is appropriate for gas tractors where the tach drive is on the generator. Use part number ADR9209 to make this a single wire self exciting alternator (not included). (Item #: 164228, Ref: ADR0382) $147.00

Battery Cable - Cable, battery to solenoid. For tractor: TO35 battery to ground for tractors: MF35 gas, MF85D, MF88D, MF Super 90 gas. 14-1/2 inches long. For TO20, TO30. (Item #: 115760, Ref: 181572M91) $17.50

Battery Cable - Cable, battery to solenoid, 24 inches. For 202, 204, 35, 65, F40, Super 90. (Item #: 172373, Ref: 186827M1) $19.80

Coil, 12 Volt - This 12 Volt Coil has an internal resistor for tractor models Super 90, Super 95, TO35, 150, 165, 180, 202, 35, 410, 50, 65, 85, 88. (Item #: 105299, Ref: 189673M1) $18.00

Coil, 12V - This 12 Volt Coil with internal resistor comes with bracket for Delco distributor with screw held cap. For tractor models 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50. (Item #: 105299, Ref: 189673M1) $18.00

Coil, Ignition 6V - Coil for Delco Distributor with clip held cap. For 202, 204, 20, 26, 27L, 27, 302, 303, 304, 34, 356, 35, 402, 404, 60, 70, 72, 80, 82, 90, 92, MF35, MF50, MF65, MF85, MF88, MH50, Super 92, Super 90, TO20, TO30, TO35. Replaces 1024481M91. (Item #: 105281, Ref: D4PE12029AA) $14.00

Distributor - A complete distributor that comes with cap, points, rotor and condenser. It has a 9 tooth shaft gear. For tractor models TO20, TE20 with Continental Engine, TO30, TO35, 35 (to serial number 245932), F40, 50 to serial number 536248. (Serviceable for: 135, 202, 204, 2135, 2200 (early with 1112643 distributor and Z134 engine). Replaces 1111722, 1111740, 1112557, 1112570, 1112586, 181544M91, 181685M91, 181686M91, 182852M91, 829856M9. (Item #: 152856, Ref: 182852M91-TP) $139.30

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. For models TO20, TO30, TO35, 35, 202, 204, 302, 304, 50, 65, 85, 88, Super 90. Replaces 811735 Delco and 1750411M1. (Item #: 104554, Ref: 1750411M91) $8.50

Distributor Cap 4 Cylinder - For tractor models 35, 50, 65, 135, 150, 165, 175, 180, 1100, MH50, IND 202, 204, 302, 304, 356. This is a Delco style screw on cap. (Item #: 105569, Ref: 1024914M91) $10.30

Distributor Cap 6 Cylinder - Distributor CAP For 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, MH50, Super 92, Super 90. For Delco. Replaces 1509692M1 812627, 824735, 825409, 1867722, 1889361, 1911597, 12338674, D301, D301A, D320. (Item #: 104557, Ref: 21A443) $12.00

Distributor Cap 6 Cylinder - Distributor CAP For 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50 (Item #: 105585, Ref: 1960810) $12.70

Distributor Dust Cap - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Item #: 125927, Ref: 1960325) $18.00

Distributor Dust Cover - Dust Cover for Delco Distributor with Clip Held Cap. For 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35. Replaces 1750491M91. (Item #: 103153, Ref: 1900119) $9.00

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. fits tractor models F40, 202, 204, 40, Super 90, 85, 88, TO20, TO30, TO35, 302, 304, 35, 50, 65, 95, 97 with one of the following Delco distributors: 1112557, 1112570, 1112585, 1111722, 1111737, 1111740, 1112583, 1112589. Replaces: washer: 1750412M1, bushing: 1750499M1, shim washer: 1750406M1, 1025008M1 (Item #: 178103, Ref: ABC3007) $29.50

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Round Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.345 inch diameter round hole. If not sure, measure before ordering. Originally used on 35 Combines and TO20 Tractors. Replaces: 1750438M1, 1750455ML, 22303X, 353444XL, 357119 (Item #: 111459, Ref: 1878405ASSY) $15.00

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Massey Harris 92 Combine, Massey Harris 50. Ferguson F40, TO30, TO35, 202, 204, 302, 304, 356, 50, 65, 85, 88, 95, 97, Super 90, 35. Replaces: 1750513M1, 1750514M1, 1750520M1, 22303X, 353444XL, 354119X (Item #: 111468, Ref: 1904376) $14.40

Electronic Ignition Conversion Kit -12V Negative Ground - For 35, F40, 50 all with Cont Z134 engine and Delco (D)1112643 dist, MF65 with Cont G176 engine and D1112644 dist, 135 Spec with Cont Z145 with D1112643 dist, 135/150 with Cont Z145 and D1112644 dist, 165 with Cont G176 engine and D1112644 dist, 165 with Perkins AG4-212 with D1112458 dist, 175/180 with Cont G206 engine with D1112647 dist, 175/180/185 with Perkins AG4-236 engine with D1112693 dist, MF255 with Perkins AG4-212 engine and D1112458 dist, MF265/MF285 with Perkins AF4-236 engine and D112693 dist. Also works with H-260 Continental Engine.Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For use on 12 volt neg grnd system only. Never change points again. Easy to install. Increase spark plug life and horsepower. Improve fuel economy. (Item #: 105073, Ref: 1145A) $120.00

Electronic Ignition Conversion Kit, 12 volt negative ground - Fits TO20, TO30, TO35, 50, MH50, 65 : - For TO20 with Continental Z120 engine and Delco distributor. TO30 with Continental Z129 engine and Delco 1111740 distributor, TO35 and MH50 with Continental. Z129 or Z134with Delco distibutor 1112557 or 1112570, TO35, 35 and 50 with Continental Z134 and a Delco 1112570, 1112585 or 1112385 distibutor, 65 with Continental G176 engine and a Delco 1112583 or 1112589 distributor. Also fits aftermarket ATL-55-1200. Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For counter clockwise distributors with clip type cap. For use on 12 volt negative ground system only. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. (Item #: 113775, Ref: 1143) $158.00

Electronic Ignition Conversion Kit, 6 volt positive ground - For TO20 with Continental Z120 engine and Delco distributor including Delco distributor 1112618. TO30 with Continental Z129 engine and Delco 1111740 distributor, TO35 and MH50, 50 with Continental. Z129 or Z134with Delco distibutor 1112557, 1111722 or 1112570, TO35, 35 and 50 with Continental Z134 and a Delco 1112570, 1112585 or 1112385 distibutor, 65 with Continental G176 engine and a Delco 1112583 or 1112589 distributor. Also fits aftermarket ATL-55-1200. Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For counter clockwise distributors with clip type cap. For use on 6 volt positive ground system only. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. (Item #: 113774, Ref: 1143P6) $166.00

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p/n CPN12259EI. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For tractor models 35, F40, 50 all with Cont Z134 engine and Delco (D)1112643 dist, MF65 with Cont G176 engine and D1112644 dist, 135 Spec with Cont Z145 with D1112643 dist, 135/150 with Cont Z145 and D1112644 dist. (Item #: 183757, Ref: 91145A) $196.00

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 186216M91, 186216M91, 506063M91, 522462M91 (Item #: 112273, Ref: 376852R91) $10.90

Generator, 12 Volts - Lucas style replacement, 12 volt, pulley is not included. For tractor models: 135, 148, 155, 158, 165, 168, 175, 178, 185, 188, 35, 35X, 50, 65, FE35, TE20, TEA20, TED20, TEF20. Replaces K908882, 3049871R91, 81806433, ADN10001R, ADN10001, E27N10000, 2871170, 897104M92, 12871182, 37H8231, 22703, 22791, LRD101, 2871170, 2871182, 22703, 22791, LRD101, 897104R92, 897104T, 897104M92, 2871182 (Item #: 113578, Ref: R1192673) $158.00

$Massey Ferguson 35 Ignition \ Light Switch$
Ignition / Light Switch - Used on Massey Ferguson 202, 35, 204, 65, Super 90, and 50 tractors, this is a 5 Position Switch. It has 4 Terminals with 2 keys. The post OD is 3/4 inches. Replaces 189527M91, 189527V91, 189527M91. This switch is used on Gas and LP equipped tractors. (Item #: 170613) $84.00

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit For Delco distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. Fits 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35, 95, 97, F40, 202, 204, MH50. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1111740. (Item #: 103151, Ref: ATK1DCR) $9.50

Ignition Tune-Up Kit - For Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88, 202, 204, Fits models with Continental engines with Delco distributors with clip held cap, (Item #: 168708) $28.30

Neutral Safety Switch - This Neutral Safety Switch has blade type terminals. For tractors: MF240*, MF250*, MF253, MF282, MF283 except Brazil, MF298*, MF360, MF362, MF375, MF383, MF390, MF393, MF398, MF399 industrial: 40E*. *Optional with 3381094M1. Replaces 888501M2, 963417M2, 1012043M91, 1679 223M2, 1679223M1, 1679223M2, 3381094M1, 34198, 39121, 39855, 963417M2, SMB497. (Item #: 164579, Ref: 1679223M2) $26.50

Neutral Safety Switch - This Neutral Safety Switch is for bullet type terminal. Replaces 181140V94, 53208520, 181140M1, 181140M91, 181140M94, 181140M93, 181140M92. (Item #: 111507, Ref: 181140M94) $11.30

Neutral Safety Switch Boot - For tractor models: 35, 40, 50, 65, 85, 175, 180, 230, 235, 245, 255, 265, 275, 285, 20, 20c, 30, 30B, 30D, 31, 40, 40B, 50, 50A, 50C, 50D, 60, 2135, 3165, 22, 2500, 4500, 6500, 88, 135, 150, 165, Super 90, 202, 203, 204, 205, 302, 304. (Item #: 178119, Ref: 180776M1) $12.80

Regulator Control Box - For tractor models 35 with A3.152 Engine, FE35 with 23C or 87MM Engine. Regulator Control Box also replaces numbers 2872625, 2872631. (Item #: 173147, Ref: 826788M1) $63.00

Rotor - Used with Delco distributor and clip held cap. For tractor models (35 up to serial number 245033), (50 up to serial number 536249), (65 up to serial number 702826), TO20, TO30, TO35. (Item #: 110177, Ref: 1750498M1) $3.60

Rotor - Used with Delco distributors1112577, 1112570, 1112585, 1112591, and 1112598 with a clip held cap. For tractor models: 35 (up to serial number 245033), 50 (up to serial number 536249), 65 (up to serial number 702826), 85, 88, Super 90, 97. Replaces 1750498M1 and 1750785M1. (Item #: 110177, Ref: 1750498M1) $3.60

Solenoid Switch - Solenoid Switch, 12-volt. Three Post. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. For tractors: TO35, F40, MF35, MF50, MF65, MF85, MF90 Industrials: 202, 204, 302, 304, 256 utility gas and LP models. Replaces 182696M91, 182696M1. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.70

Solenoid, Starter - For Massey Ferguson tractor models TO35, 35, 35 (Turf and Utility), 35 (Government (655 Series)), 50, 65, 85, 88, 205, 300 (S), 302, 304, 350 (SS), Compatible with Massey Ferguson Construction and industrial models 200, 202, Compatible with Massey Ferguson Lawn and Garden (s) 10, 12 Replaces Massey Ferguson OEM number 182696M91, 182696M1, , Compatible with Massey Harris tractor models 50, Fender or firewall mount, Fits Massey Ferguson tractor models 205-4, 400SST, 500SST, 500 Special, Super 90, Fits Massey Ferguson Lawn and Garden (s) 7, 8, 8E, 14, , (Item #: 168108) $37.00

Spark Plug Wire Set, Custom - No cutting or fitting required for these wires. These are custom made for the following 4-cylinder Continental Gas engines using Delco Distributors: Z120, Z129, Z134, and Z145. Used on tractors: TE20, TO20, TO30, F40, 135, 135 Deluxe, 150, 35, 50, MH50, TO35. Also used on INDUSTRIALS: 202, 204. (Item #: 113765, Ref: S.42779) $17.00

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter - This is a new Delco Style Starter. 10 teeth, clockwise rotation, 12 Volt. For tractor models 135, 150, 165, 235, 30, 302, 304, 3165, 35, 356, 40, 65. All with diesel engines. Replace 535388M92, TS-1036, 1107503, 1107512, 1107860, 1107870, 191081M92, 191081M93, 515913M91, 515913M92, 579934M91, 579935M91, 72072956, 773363M91, AM1107860, S14192, 1108662, 1109264, 1200-0113, 1200-3119, 12301330, 1403617M91, 189117M91, 1900434M91, 1903617M91, 191091M92, 1998345, 1998377, 2072956, 323-673, 323-700, 323673, 323700, 515913M93 (Item #: 168794, Ref: 515913M91) $320.00

Starter - This Lucas style starter is for 12 volt, 10 tooth, clockwise rotation. 3-bolt mount, Diesel engines. For tractor models (205, 250SP 1966 to 1972 with Chrysler H-170), (FE65 1956 to 1962 diesel), (20, 40 1970 to 1971), (35 1960 to 1968), (65 1959 to 1964), (135 1964 to 1973 with Perkins 152 diesel), (148 1964 to 1972 with Perkins 152 diesel), (154 1986 to 1989), (154 1980 to 1981 with Perkins 152 diesel), (165 1964 to 1969 with Perkins 203 diesel), (184 1980 to 1985 with Perkins 236 diesel), (263T from 1993 up), (364 1989 to 1993 with Perkins 152 diesel), (2135 1964 to 1968), (702 1959 to 1962). Replaces; Delco: 1107870, 1107512, 12301330, 1107853, 1107860, Dixie: TS-1036, 260-62143, Massey Ferguson: 191091M92, 515913M93, 579934M91, 513913M92, 1900434M91, 191081M93, 1403617M91, 515913M92, 189117M91, 1903617M91, 513913M91 1107503. (Item #: 111745, Ref: SLU0008) $231.00

Starter - This is an Off Set Gear Reduction replacement for 515913M91. It is used on 135, 150, 165, 235, 30, 302, 304, 3165, 35, 356, 40. All with diesel engines. Replace 535388M92, TS-1036, 1107503, 1107512, 1107860, 1107870, 191081M92, 191081M93, 515913M91, 515913M92, 579934M91, 579935M91, 72072956, 773363M91, AM1107860, S14192, 1108662, 1109264, 1200-0113, 1200-3119, 12301330, 1403617M91, 189117M91, 1900434M91, 1903617M91, 191091M92, 1998345, 1998377, 2072956, 323-673, 323-700, 323673, 323700, 515913M93, 1868283M5 (Item #: 181965) $151.00

No
Picture
Starter - Delco Style (4145), Remanufactured, Delco Remy, 1107654, 182454M92 - For Massey Ferguson tractor models TO35, 35, 65, Compatible with Massey Ferguson Construction and industrial models 50, 202, 204, Replaces Massey Ferguson OEM number 182454M92, 1900347M91, 182454M91, Replaces Delco Remy manufacturer number 1107654, Replaces manufacturer number 4145, 140-026, 91-01-4708, Delco Style, Voltage: 12, Rotation: Clockwise, Teeth: 9, (Item #: 203436) $440.01

Starter Assembly - 12 volt, diesel, 10 teeth, 2.7KW. For tractor models MF30, MF50, MF165, MF174, MF174C, MF194, MF265, MF270 MF275, MF285, MF290, 6500, 7500, 8500. Replaces Lucas, 26413, 27411, 27433, 27539, 26410 LRS190R, 26412, 26412R, LRS190, 27432, 26264, 26154, 26264R. 1680065R3, 1680065M3, 1680065M1, 26264R, 26412R, 27432R, 3.93E+07, 26412, 26220, 3597371M2, 3597426M3, 3597426M2, 968856M1, LRS190R, 3930505R1, 1868285M3. Left side mount. (Item #: 157974) $119.98

Starter Drive - Drive assembly. For tractors, except diesel: MF35, MF50, MF65 industrials: 202, 204, 302, 356. Services starter 1107226. For 202, 204, 302, 356, MF35, MF50, MF65 (Item #: 178979, Ref: 1019269M91) $90.00

Starter Drive - Drive assembly. For Continental Z145 in tractors: 135, 150, 165, 175, 178, 180, 20 Indust/Const, 202 Indust/Const, 205, 20C Indust/Const, 2135 Indust/Const, 2200 Forklift, 2200 Gas, 230, 235 Indust/Const, 235 Orchard, 245, 245 Orchard, 2500 Forklift, 302 Indust/Const, 304 Indust/Const, 30B Indust/Const, 3165 Indust/Const, 35, 356 Indust/Const, 40, 4500 Forklift, 50 Indust/Const, 65 . Replaces Delco 1963808. 9 tooth, Clockwise Rotation, for Delco 10MT. Services starter 1108324. (Item #: 124822, Ref: 1025380M91) $29.68

Starter Drive - Drive Assembly attaches with keyway and set screws. For tractors: TO20, TO30, TO35, 50, MH50, 35, 65, F40, 202, 203. Services Delco Starters 1107755, 1107654, 1109457. NOTE: Please check the starter that is in your tractor, some starters use a pin to attach drive not a set screw. (Item #: 113968, Ref: 1035335M91) $33.10

Starter Solenoid - Solenoid Assembly, flange mounting to starter. Replaces Delco 1114356 on starters 1108649, 1107503, 1107512, 1108649. Gas and diesel applications. 12-volt. Replaces 1025381M91, 1047083M91, 1755027M91. (Item #: 105675, Ref: 1047083M91) $16.60

Starter Switch - Switch Assembly with key, for ignition and light. Switch has 3 terminals. For GAS tractors: TE20, TEA20, TO20, TO30, TO35, MF35, MF50, MF65, 202, 203, 204, 205. (Item #: 111516, Ref: 180681M93) $14.00

Starter Switch - For tractor models Super 90, 135, 165, 50, 65), 35 Gas and Perkins Diesel, TO35 Gas and Standard Diesel. Starter Switch. 4 prong. Includes 2 keys. This is a three position switch, heat, operate, start. - LUCAS Equipment. Replaces 35630, 883920M1, 967570M4, 504809M91, 963416M1, 883928M1, 883928M91, 417402M1, 2846124 (Item #: 111515, Ref: 883928M1) $9.40

Starter, 12 Volt - For tractor models 135UK, 35, TEA20, TED20 with Standard Gas Engines (not Continental). Also replaces 25038, 1903125M91, S2532, 25038D. 12 volt system. (Item #: 115902, Ref: 829803M91) $524.90

Starter, 12 Volt - This new 12 volt starter with drive is for tractor models TO20, TO30, 35, 50, 65, 202, 204, 302, 356, TO35. Verify number off old starter. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 InchES), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Replaces the Delco number 1107226 and the original equipment numbers: 181541M91, 1109457, 182454M92, 1107654, 190004M91, 1107226 and TISCO starters 7877-EX, 81271-EX, 85451-EX, 4858MFGXL_12V, and 1900348M91. (Item #: 160371, Ref: 1107226) $220.00

Switch, Lamp and Horn - Lucas type. Used on 135, 148, 165, 168, 175, 178, 185, 188, 230, 235, 240, 245, 250, 255, 265, 275, 290, 298, 35, 35 Gas / 35 Petrol, 35X, 375E Brazilian, 390E Brazilian, 50, 50E, 50EX, 565, 575, 590, 65, 765. Replaces 882283M1, 54033364, 34952 (Item #: 124742, Ref: 1502378C1) $18.90

Switch, Push Button - Fits multiple Massey Ferguson tractors. Replaces 189158M91, 189158V91, 181141M91. (Item #: 105703, Ref: 189158M91) $11.10

Tune-Up Kit, Delco Screw Held Cap - Used on Massey Ferguson 4 cylinder Continental models 35, 50, 135, 150, 202, 204, 2135, 2200, 2500, all with Delco distributors with SCREW held cap. Contains point, rotor, condenser, cap, spark plugs, and spark plug wires. (Item #: 158889) $58.00

Tune-up Kit, Basic - FOR DELCO DISTRIBUTORS WITH SCREW-HELD CAP. Ignition KIT with ROTOR For 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50, MF65. (Item #: 105278, Ref: ATK10DSR) $10.70

Tune-up Kit, Comprehensive - For Delco distributor with clip-held cap. For 4-cylinder gas engine, kit includes: AL 386 spark plugs, plug wires, points, condenser, rotor, distributor cap. Fits tractors: TO20, TO30, TO35, 35 Ag. before serial number 245033, 35 Utility before serial number 655001052, 35 Turf before serial number 65600452, 85, 88, 90 Super, MH and 50 before serial number 536249, 65 before serial number 702825, 202 Ind. Before serial number 308962, 204 Ind. Before serial number 343688, 302 Ind. Before serial number 119750053, 356 Ind. Before serial number 570001025, Swathers 34, 44. Combines 92, Super 92. (Item #: 158888, Ref: MFTUNEKIT) $57.00

Tune-up Kit, With Plugs - This Tune-up Kit is for Clip held Cap Delco Distributors, 4 cylinder gas models and includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For models TO20, TO30, TO35, (MF35 with serial number prior to 245033), (MH50 with serial number Prior to 536249), (MF50 with serial nunber prior to 536249), (MF65 with serial number prior to 702825), MF85, MF88, MF90 Super, (35 Utility with serial number prior to 655001052), (35 Turf with serial number prior to 656000452), (202 with serial number prior to 308962), (204 with serial number prior to 343688), (302 with serial number prior to 119700082), (304 with serial number prior to 119750053), (356 with serial number prior to 570001025), Super 92. Verify correct spark plug size and type (Item #: 173738, Ref: MFITK10) $27.30

Tune-up Kit, With Plugs - This 4 cylinder Tune-up Kit is for Delco Distributors with screw type cap. VERIFY SPARK PLUG SIZE as this kit comes with AL386 that are 18MM, 1/2 inch reach and 7/8 hex size. For tractor models 35, 50, 65, 135, 150, 165, 175, 180, 1100, MH50, 202, 204, 302, 304, 356. Includes plugs, points, condenser and rotor. Verify correct spark plug size and type (Item #: 182530, Ref: MF-ITK-40) $27.00

Voltage Regulator, 12 Volt - 12 Volt - 4 Terminal - Flat Mount. 4 Terminal: Light - Battery - Field - Armature (underneath base). Fits TO35, MF25, F40, MF35, MF50, MF65, MF85, MF88, MF Super 90, MF135, MF150, MF165, MF175, MF180, MF202, MF204, MF203, MF205, MF2135, MF3165. Combines SP300, SP410, SP510. 12 Volt models with generators. The Three Post side of this regulator may be parallel or slightly splayed. (Item #: 105581, Ref: 182548M92) $27.00

Wiring Harness - This Wiring Harness is used on Massey Ferguson Tractor 35 built in the UK with serial number 304623 and later, with Perkins A3.152 Diesel engine and Lucas electrical. It replaces part number 54933558. (Item #: 113570, Ref: 54933558) $64.30

Universal Parts and Accessories
Category: Electrical System

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Item #: 114088, Ref: 2348258) $50.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $73.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Battery Hold Down - For 8N, 9N, 2N, 2000, 3000, 4000, and others. (Verify battery measurements). Center to center mounting holes 10 1/8 inch. For batteries 8 15/16 inches long and 6 13/16 inches wide. (Item #: 104047, Ref: NCA10718A) $13.60

Battery Hold Down J-Bolts, Pair - This Pair of Battery Hold Down Bolts each measure 10.5 inches long. Price is for a pair. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568. Replaces 98185A1. Also Universal for many other Battery Hold Down Brackets. (Item #: 125150, Ref: 393161R1) $9.00

Battery Joining Cable - This cable is 2 gauge measuring 10 inches. (Item #: B204) $18.75

Battery Joining Cable - This cable is 2 gauge measuring 18 inches. (Item #: B207) $21.00

Battery Joining Cable - The cable is 2/0 gauge measuring 18 inches. (Item #: B1937) $36.00

Battery Joining cable - The cable is 2/0 gauge measuring 12 inches (Item #: 186350, Ref: B1936) $40.80

Battery to Starter Cable - This cable is 2/0 gauge measuring 12 inches. (Item #: 183882, Ref: B1931) $33.30

Battery to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: B1932) $25.50

Battery to Starter Cable - This cable is 2/0 gauge measuring 36 inches (Item #: 184665, Ref: B1934) $53.00

Battery to Starter Cable - This cable is 2/0 gauge measuring 48 inches. (Item #: 117381, Ref: B1935) $35.40

Cable, Battery to Starter - This cable is 2 gauge measuring 8 inches. (Item #: 184847, Ref: B188) $17.30

Cable, Battery to Starter - This cable is 2 gauge measuring 12 inches. (Item #: 184028, Ref: B189) $15.70

Cable, Battery to Starter - This cable is 2 gauge measuring 18 inches. (Item #: 184391, Ref: B190) $19.80

Cable, Battery to Starter - This cable is 2 gauge measuring 36 inches. (Item #: 184406, Ref: B192) $25.10

Cable, Battery to Starter - This cable is 2 gauge measuring 48 inches. (Item #: 173479, Ref: B227) $37.50

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt system without the resistor. Replaces: 74061737, 74514967. (Item #: 140520, Ref: D5TE12029AB) $15.40

Coil Bracket - Universal Coil Bracket (Item #: 107072, Ref: R1940) $6.20

Coil, 12 Volt with Resistance - This is a universal 12 volt coil with internal resistance. It can be used with 12 volt conversions if you don't want to put a resistor in line. Replaces 100402A, 70143, Delco 1115043, AA4879R, AA4983R, AT10399, D2AF12029AA, 1115043, 161861A, 189673M1, 189673M92, 353875R91, 395331R91, 395331R92, 396330R91, 396330R92, 396547R91, 396547R92, 396547R93, 396547R93, 74515665, AV101417, D5TE12029AB, 100402A, 1100-0540, 1100-0544, 1115043, 1200-0541, 1400-0565, 1700-0544, 189673V92, 25270, 70143 (Item #: 105299, Ref: 189673M1) $18.00

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 192483, Ref: 40611) $74.00

Coil, High Performance (Black), 12 Volt, Oil Filled - Heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 105092, Ref: 40511) $40.00

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Item #: 182566, Ref: 40111) $69.00

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Coil has 1.5 Ohms of resistance. (Item #: 125199, Ref: 40011) $29.00

Coil, High Performance (Chrome), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. (Item #: 182567, Ref: 40601) $79.00

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 182550, Ref: 40501) $71.00

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms resistance. (Item #: 182585, Ref: 40001) $48.90

Coil, Ultra High Performance (Black), Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 183385, Ref: 45111) $81.00

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using Ignitor II electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Low 0.6 Ohm primary resistance. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 108304, Ref: 45011) $22.90

Coil, Ultra High Performance (Chrome), Oil Filled - Flame-Thrower II coils feature a very low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high performance ignitions. Low resistance and improved turns ratio help to produce up to 45, 000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes including our own Second Strike. 0.600 ohms Primary Resistance, 9.00K ohms Secondary Resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 182456, Ref: 45001) $74.00

No
Picture
Distributor Terminal Insulator Assembly, Delco - Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. (Item #: 111468, Ref: 1904376) $14.40

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $21.10

Pulley - This single groove pulley is 0.920 inches wide, 3.200 inch outside diameter, 0.670 inch center, for 13mm (0.50 inch) Belt. This is as a universal part, please verify measurements before ordering. (Item #: 172973, Ref: R52159) $18.00

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/4-inch reach. Replace Autolite AL65. OEM 834236M1 and 157803A. NOTE: Verify spark plug type before ordering. (Item #: 172892, Ref: AL65) $4.40

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Item #: 130074, Ref: AL3076) $10.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. Copper core. (Item #: 107985, Ref: S2097) $19.20

Spark Plug Wire Set, 4 Cylinder, Universal - For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. Made with carbon impregnated core to suppress radio static and designed to handle the high voltage of electronic ignition systems. (Item #: 108070, Ref: CPN12259EI) $20.00

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, 500 ohms per foot stainless steel wire wound (�Mag Wire�) conductor. The lower resistance of 500 ohms per foot provides more potential energy to fire the spark plug under adverse conditions while preventing harmful RFI and EMI emissions. Also, the wire wound conductor never changes resistance. Longest Reach is 33 inches. This wire set is compatible with Electronic Ignition. (Item #: 178803, Ref: S66465) $28.00

Spark Plug Wire Set, Universal 6 Cylinder - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Item #: 103156, Ref: SWS260) $20.30

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Item #: 103155, Ref: CPN12259) $16.20

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $29.90

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $29.00

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

Switch to Starter Cable - This cable is 2 gauge measuring 18 inches. (Item #: 184822, Ref: B194) $16.80

Switch to Starter Cable - This cable is 2 gauge measuring 24 inches. (Item #: 185368, Ref: B195) $15.70

Switch to Starter Cable - This cable is 2 gauge measuring 36 inches. (Item #: B196) $21.00

Switch to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: 185109, Ref: B1938) $38.50

Switch to Starter Cable - This cable is 2/0 gauge measuring 24 inches. (Item #: 134614, Ref: B1939) $43.70

Switch to Starter Cable - This cable is 2/0 gauge measuring 36 inches. (Item #: 184663, Ref: B1940) $57.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.00

$Massey Ferguson 35 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Electrical System

[Categories] [All MF35 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy