FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 285 Parts

Category: Electrical System

[Categories] [All MF285 Parts] [All Massey Ferguson Models]

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Alternator - 12 volt, 63 amp. 3 pin. Will replace a 2 pin as the 3rd pin is an accessory. For tractor models (740, 750, 760 1972-73 with 354 dsl), (230 1976-81 with Z145 gas), (230 1975-76 with 152 dsl), (235 1975-76 with Z145 gas), (235 1974-76 with 152 dsl), (245 1977-81 with Z145 gas), (255 1974-76 with 203 dsl), (1974-75 with 212 gas), (265 1974-75 with 236 gas or 1974-76 with 236 dsl), (275 1974-76 with 248 dsl), (285 1973-74 with 236 gas), (285 1973-76 with 318 dsl), (295 1979-82 with 318 dsl), (1085 1973-76 with 318 dsl), (1105 1971-76 with 354 dsl), (1135 1971-76 with 354 dsl), (1155 1974-76 with 540 dsl), (1155 1971-73 with 510 dsl), (1505, 1805 1974-76 with Cat. 3208 dsl). Replaces 1100581, 1100936, 1103117, 1100588, 1100578. (Item #: 111768, Ref: ADR0239) $110.00

Alternator - 12 volt, 72 amp. For tractor models (230, 245 1977-82 with gas and dsl), (255, 265 1977-82 with 236 dsl), (275 1977-82 with 248 dsl), (285 1977-82 with 318 dsl), (295 1979-82 with 318 dsl), (1085 1977-78 with 318 dsl), (1105, 1135 1977-78 with 354 dsl), (1155 1977-78 with 540 dsl), (1505 1977-78 with 3208 dsl), (1805 1977-78 with 3208 dsl), (2675, 2705 1981-84 with 354 dsl), (2775, 2805 1981-84 with 640 dsl), (2810, 2830 1982 with 354 dsl, (2850, 2870, 2890 1982 with 540 dsl). Replaces 1102921, 1102920, 1103116, 1103133. (Item #: 110572, Ref: ADR0133) $116.00

Blower Motor - 4 wire, 12 volt, 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. For tractor models 750, 760, 850, 860, 865, 1085, 1105, 1135, 1155, 1505, 1805, 2640, 2675, 2705, 2745, 2775, 2805, 285. Replaces BM333812, 1048515M1, 1048515M91, 1680361M91, 1894729M91. (Item #: 108656, Ref: 72162089) $74.00

Electronic Ignition Conversion Kit -12V Negative Ground - For 35, F40, 50 all with Cont Z134 engine and Delco (D)1112643 dist, MF65 with Cont G176 engine and D1112644 dist, 135 Spec with Cont Z145 with D1112643 dist, 135/150 with Cont Z145 and D1112644 dist, 165 with Cont G176 engine and D1112644 dist, 165 with Perkins AG4-212 with D1112458 dist, 175/180 with Cont G206 engine with D1112647 dist, 175/180/185 with Perkins AG4-236 engine with D1112693 dist, MF255 with Perkins AG4-212 engine and D1112458 dist, MF265/MF285 with Perkins AF4-236 engine and D112693 dist. Also works with H-260 Continental Engine.Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For use on 12 volt neg grnd system only. Never change points again. Easy to install. Increase spark plug life and horsepower. Improve fuel economy. (Item #: 105073, Ref: 1145A) $123.00

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p/n CPN12259EI. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For tractor models 165 with Cont G176 engine and D1112644 dist, 165 with Perkins AG4-212 with D1112458 dist, 175/180 with Cont G206 engine with D1112647 dist, 175/180/185 with Perkins AG4-236 engine with D1112693 dist, MF255 with Perkins AG4-212 engine and D1112458 dist, MF265/MF285 with Perkins AF4-236 engine and D112693 dist. Also works with H-260 Continental Engine. (Item #: 183757, Ref: 91145A) $186.00

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 186216M91, 186216M91, 506063M91, 522462M91 (Item #: 112273, Ref: 376852R91) $11.10

Ignition Key - For Massey Ferguson tractor models 50, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1500, 1800, Compatible with Massey Ferguson Combine (s) 410, Compatible with Massey Ferguson Construction and industrial models 20, 50, 302, 304, 2135, 2200, Replaces Massey Ferguson OEM number 192922M1, 192293M1, 180923M91, 180923M1, 1031664M1, 192922M91, 777269, 192922V1, For use with switches 194747M91 and 504809M91, (Item #: 173700) $1.30

Neutral Safety Switch - This Neutral Safety Switch is for bullet type terminal. Replaces 181140V94, 53208520, 181140M1, 181140M91, 181140M94, 181140M93, 181140M92. (Item #: 111507, Ref: 181140M94) $11.30

Neutral Safety Switch Boot - For tractor models: 35, 40, 50, 65, 85, 175, 180, 230, 235, 245, 255, 265, 275, 285, 20, 20c, 30, 30B, 30D, 31, 40, 40B, 50, 50A, 50C, 50D, 60, 2135, 3165, 22, 2500, 4500, 6500, 88, 135, 150, 165, Super 90, 202, 203, 204, 205, 302, 304. (Item #: 178119, Ref: 180776M1) $12.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter - 12 volt, 10 tooth, 35MT Delco style, DD unit with rotatable DE housing. For tractor models 1080, 1085, 1100, 1105, 1130, 1135, 285, 70, 275 (<9A270511), 50C. Replaces 1433262M91, 518884M91, 1113656, 1113672, 1113402, 1113650, 1113683 (Item #: 102202, Ref: 1903109M91) $312.91

No
Picture
Starter - For tractor models 285, 1080, 1085. Replaces Delco 1113676 and TISCO 89361-EX. 12 Volt system using Perkins Diesel. Remanufactured starter with New Armature shaft and bushings, new field coils, new brush holder and brushes, new wiring and hardware. Refundable $ 80.00 core charge will be added to your order. (Item #: 203143, Ref: S.13720) $495.75

Starter Drive - For tractor models Super 90, 1100, 1130, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 50, 85, 88, TO35 GAS OR DIESEL, 750 serial number 1696157>, (850, 860 ALL WITH DELCO STARTER 1113676), (203, 205, 410, 510, 540, 550, 760 ALL WITH PERKINS ENGINES). Starter drive used with starters 1113402, 1113672, 1113391. Replaces 1755245M1. (Item #: 111105, Ref: 1755245M1) $29.80

Starter Solenoid - This is a 12 volt starter solenoid. It is used on Massey Ferguson Diesel Tractors 1080, 1085, 1100, 1105, 1130, 1135, 2675, 2705, 275, 285, 85, 88, Super 90 . Massey Ferguson Combines: 410, 510, 540, 750, 760, 850, 860. It Replaces 1009784M91, 1017877M92, 1028587M91. (Item #: 105672, Ref: 1115510) $30.00

Starter Switch - For tractor models 1080, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 165, 175, 180, 2135, 230, 235, 245, 255, 265, 275, 285, 50, all with Perkins Diesel Engines. Starter Switch. 2 Prong. Includes 2 keys. (Item #: 111510, Ref: 504809M1) $25.04

No
Picture
Voltage Regulator - Internal voltage regulator for MF/Delco alternators on tractors: MF230, MF235, MF245, MF255, MF265, MF275, MF285, MF1085, MF1105, MF1135, MF1155, MF1500, MF1505, MF1800, MF1805, MF2675, MF2705, MF2745, MF2775, MF2805 industrials: 20C, 30B, 30D, 40B, 50C. Replaces 1039664M1 and Delco 1116387. For 20C, 30B, 30D, 40B, 50C, MF1085, MF1105, MF1135, MF1155, MF1500, MF1505, MF1800, MF1805, MF230, MF235, MF245, MF255, MF265, MF2675, MF2705, MF2745, MF275, MF2775, MF2805, MF285 (Item #: 173217, Ref: 1052023M91) $12.60

Universal Parts and Accessories
Category: Electrical System

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Item #: 114088, Ref: 2348258) $49.80

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $68.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Battery Hold Down - For 8N, 9N, 2N, 2000, 3000, 4000, and others. (Verify battery measurements). Center to center mounting holes 10 1/8 inch. For batteries 8 15/16 inches long and 6 13/16 inches wide. (Item #: 104047, Ref: NCA10718A) $13.60

Battery Hold Down J-Bolts, Pair - This Pair of Battery Hold Down Bolts each measure 10.5 inches long. Price is for a pair. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568. Replaces 98185A1. Also Universal for many other Battery Hold Down Brackets. (Item #: 125150, Ref: 393161R1) $9.00

Battery Joining Cable - This cable is 2 gauge measuring 10 inches. (Item #: B204) $18.75

Battery Joining Cable - This cable is 2 gauge measuring 18 inches. (Item #: B207) $21.00

Battery Joining Cable - The cable is 2/0 gauge measuring 18 inches. (Item #: B1937) $36.00

Battery Joining cable - The cable is 2/0 gauge measuring 12 inches (Item #: 186350, Ref: B1936) $40.00

Battery to Starter Cable - This cable is 2/0 gauge measuring 12 inches. (Item #: 183882, Ref: B1931) $33.30

Battery to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: B1932) $25.50

Battery to Starter Cable - This cable is 2/0 gauge measuring 36 inches (Item #: 184665, Ref: B1934) $53.00

Battery to Starter Cable - This cable is 2/0 gauge measuring 48 inches. (Item #: 117381, Ref: B1935) $34.70

Cable, Battery to Starter - This cable is 2 gauge measuring 8 inches. (Item #: 184847, Ref: B188) $16.60

Cable, Battery to Starter - This cable is 2 gauge measuring 12 inches. (Item #: 184028, Ref: B189) $15.10

Cable, Battery to Starter - This cable is 2 gauge measuring 18 inches. (Item #: 184391, Ref: B190) $19.80

Cable, Battery to Starter - This cable is 2 gauge measuring 36 inches. (Item #: 184406, Ref: B192) $24.60

Cable, Battery to Starter - This cable is 2 gauge measuring 48 inches. (Item #: 173479, Ref: B227) $37.50

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt system without the resistor. Replaces: 74061737, 74514967. (Item #: 140520, Ref: D5TE12029AB) $16.20

Coil Bracket - Universal Coil Bracket (Item #: 107072, Ref: R1940) $6.10

Coil, 12 Volt with Resistance - This is a universal 12 volt coil with internal resistance. It can be used with 12 volt conversions if you don't want to put a resistor in line. Replaces 100402A, 70143, Delco 1115043, AA4879R, AA4983R, AT10399, D2AF12029AA, 1115043, 161861A, 189673M1, 189673M92, 353875R91, 395331R91, 395331R92, 396330R91, 396330R92, 396547R91, 396547R92, 396547R93, 396547R93, 74515665, AV101417, D5TE12029AB, 100402A, 1100-0540, 1100-0544, 1115043, 1200-0541, 1400-0565, 1700-0544, 189673V92, 25270, 70143 (Item #: 105299, Ref: 189673M1) $18.50

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 192483, Ref: 40611) $70.00

Coil, High Performance (Black), 12 Volt, Oil Filled - Heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 105092, Ref: 40511) $38.00

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Item #: 182566, Ref: 40111) $69.00

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Coil has 1.5 Ohms of resistance. (Item #: 125199, Ref: 40011) $29.00

Coil, High Performance (Chrome), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. (Item #: 182567, Ref: 40601) $79.00

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 182550, Ref: 40501) $71.00

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms resistance. (Item #: 182585, Ref: 40001) $31.98

Coil, Ultra High Performance (Black), Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 183385, Ref: 45111) $83.00

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using Ignitor II electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Low 0.6 Ohm primary resistance. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 108304, Ref: 45011) $23.40

Coil, Ultra High Performance (Chrome), Oil Filled - Flame-Thrower II coils feature a very low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high performance ignitions. Low resistance and improved turns ratio help to produce up to 45, 000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes including our own Second Strike. 0.600 ohms Primary Resistance, 9.00K ohms Secondary Resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 182456, Ref: 45001) $73.00

No
Picture
Distributor Terminal Insulator Assembly, Delco - Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. (Item #: 111468, Ref: 1904376) $14.40

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $19.70

Pulley - This single groove pulley is 0.920 inches wide, 3.200 inch outside diameter, 0.670 inch center, for 13mm (0.50 inch) Belt. This is as a universal part, please verify measurements before ordering. (Item #: 172973, Ref: R52159) $18.00

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/4-inch reach. Replace Autolite AL65. OEM 834236M1 and 157803A. NOTE: Verify spark plug type before ordering. (Item #: 172892, Ref: AL65) $4.40

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Item #: 130074, Ref: AL3076) $10.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. Copper core. (Item #: 107985, Ref: S2097) $19.70

Spark Plug Wire Set, 4 Cylinder, Universal - For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. Made with carbon impregnated core to suppress radio static and designed to handle the high voltage of electronic ignition systems. (Item #: 108070, Ref: CPN12259EI) $20.00

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, 500 ohms per foot stainless steel wire wound (�Mag Wire�) conductor. The lower resistance of 500 ohms per foot provides more potential energy to fire the spark plug under adverse conditions while preventing harmful RFI and EMI emissions. Also, the wire wound conductor never changes resistance. Longest Reach is 33 inches. This wire set is compatible with Electronic Ignition. (Item #: 178803, Ref: S66465) $30.80

Spark Plug Wire Set, Universal 6 Cylinder - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Item #: 103156, Ref: SWS260) $20.30

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Item #: 103155, Ref: CPN12259) $16.60

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $29.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $30.00

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Switch to Starter Cable - This cable is 2 gauge measuring 18 inches. (Item #: 184822, Ref: B194) $16.40

Switch to Starter Cable - This cable is 2 gauge measuring 24 inches. (Item #: 185368, Ref: B195) $15.10

Switch to Starter Cable - This cable is 2 gauge measuring 36 inches. (Item #: B196) $21.00

Switch to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: 185109, Ref: B1938) $38.50

Switch to Starter Cable - This cable is 2/0 gauge measuring 24 inches. (Item #: 134614, Ref: B1939) $43.70

Switch to Starter Cable - This cable is 2/0 gauge measuring 36 inches. (Item #: 184663, Ref: B1940) $56.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.50

$Massey Ferguson 285 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Electrical System

[Categories] [All MF285 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy