FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 180 Parts

Category: Drive Train

[Categories] [All MF180 Parts] [All Massey Ferguson Models]

Ball Bearing - This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Item #: 173672, Ref: 195493M1) $23.80

Ball Bearing - Bearing, ball, for countershaft front. Also used for multi-power mainshaft front. Replaces 831469M1. For MF135, MF150, MF165, MF175, MF180, MF35, MF65, TO35 (Item #: 169628, Ref: 195507M1) $19.70

Bearing Cone - Cone (53177) for differential. For tractors: TO35 serial number 169467 and up MF50 using sleeve 181251M92 MF35, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275. 1.75 inch bore. 1.114 inch bearing width. (Item #: 182661, Ref: 195163M1) $143.00

Bearing Cone - Cone (HM903249), for differential. For tractors: TO35 serial number 169467 and up, using sleeve 181251M93 MF35, MF65 serial number CL2686122 and up, MF165, MF180 using sleeve 190606M92 MF175, MF235, MF255, MF265, MF275. 1.750 inch bore, 1.125 inch bearing width. (Item #: 117943, Ref: 831888M1) $30.40

No
Picture
Bearing Cone, Rear Axle, Outer - 2.6250 inch inside diameter, .8660 inch width, .0310 inch radius. For tractor models 165, 175, 180. (Item #: 165149, Ref: 831488M1) $11.80

Bearing Cup - Single cup (53375) for differential, two used. For tractors: MF35, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275. (Item #: 172732, Ref: 17392A) $60.81

Bearing Cup - Double tapered cup (53376D) for differential. For tractors: TE20, TO20, TO30, TO35 prior to serial number 169467 MF35, MF50 using sleeve number 181251M91 also MF65 to serial number CL2686121 MF135, MF150, MF165, MF175, MF180. (Item #: 180440, Ref: 181251DTC) $361.00

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $30.40

Bearing Cup, Rear Axle, LH Inner - This Left Hand Bearing Cup measures 4.438 inch outside diameter and .938 inch width. Fits models 135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF50, MF65, TO20, TO30, TO35. (Item #: 116984, Ref: 195160M1) $18.70

No
Picture
Bearing Cup, Rear Axle, Outer - For tractor models 165, 175, 180. (Item #: 185332M1) $8.01

Bearing Kit - Needle Bearing Kit. For transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions. (1) required. For tractors: TO35 serial number 171549 and up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Item #: 125327, Ref: 830735M91) $34.92

Bearing, Input Drive Shaft - Bearing, ball, input drive shaft. Inside diameter 1.574 inches, outside diameter 3.150 inches, width .709 inches. For tractor models TO35, MF35, 50, 65, 135, 150, 165, 175, 180. (Item #: 172367, Ref: 195505M1) $28.10

Bearing, Needle - Needle Bearing for countershaft. For 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 265 S (TR), 270, 275, 282, 283, 283 Brazilian, 285 (FR), 285 S (TR), 285 US Built, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 35X, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 40H, 415 Brazilian, 4215, 4220, 4225, 4235, 4245, 425 Brazilian, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 475 Brazilian, 481 Brazilian, 50, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 550, 560, 565, 575, 590, 592, 595, 60H, 60HX, 65, 65 US Built, 670, 675, 690, 698, 698T, 699, 765, 835, 865, Super 90, TO35, Massey Harris 50. Replaces 532883M1, 195453M1 (Item #: 167261, Ref: 195453M1) $10.70

Bearing, Needle - Needle Bearing, for power input pilot, multi-power. For MF135, MF150, MF165, MF175, MF180, MF35, MF65, TO35. 1 inch inside diameter, 1-5/16 inch outside diameter, 3/4 inch wide. (Item #: 116985, Ref: 195873M1) $8.00

Bearing, Outer Input Housing - 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 35, 35X, 360, 362, 375, 383, 385, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 65, 670, 690, 698, 699.Used on 1860889M1 retainer. (Item #: 165439, Ref: 886668M1) $11.80

Bearing, transmission Countershaft, Rear - For tractor models 175, 180, 285 all with multi power transmission. (Item #: 173133, Ref: 832519M1) $102.00

Countershaft - Countershaft, 6 speed and manual shuttle. 17/20 spline, 15 tooth. For the following tractors: 1080, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 235, 245, 30, 35, 50, F40, FE135, TO35. (Item #: 178325, Ref: 183054M92) $192.22

Countershaft, Transmission, 17 Spline, 15 Teeth - Shaft is 12.25 inches long. For MultiPower Transmissions on: 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 235, 240, 245, 250, 255, 265, 270, 275, 285, 290, 298, 30, 35, 50, 550, 565, 575, 590, 65, 765, FE135, FE35. (Item #: 173274, Ref: 189391M92) $224.00

Coupling, Rear Drive Shaft - 3.750 inches long, 10 spline. For tractor models 135, 150, 165, 175, 180, 203, 205, 20E, 20F, 2200, 235, 24, 240, 245, 25, 250, 2500, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 360, 375, 383, 390, 390T, 392S, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 60, 60H, 60HT, 65, 6500, 6500H, 670, 675, 6800H, 690, 698, 699. (Item #: 160154, Ref: 1680189M1) $34.98

Crown Wheel and Pinion Set - Ring has 38 teeth, shaft has 11 teeth, 10 spline. Approximately 9 7/8 inch- 9 15/16 inch total length. For tractor models 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 200 Series, 20E, 20F, 2200, 235, 24, 240 serial number N01001-A20286, 245, 25, 250, 2500, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275 UK, 281, 282, 285S, 290 UK, 30, 302, 304, 30E, 30H, 31, 3165, 360, 362, 365, 375, 390, 399, 40, 40E, 4500, 50, 50E, 50H, 50HX, 60H, 65, 6500, 670, 6800H. (Item #: 125330, Ref: 1664255M92) $265.98

Detent Plunger - This Detent Plunger is used on; 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces original part numbers 180418M1 and 180418M2. (Item #: 169495, Ref: 180418M2) $4.60

Detent Plunger Spring - This Detent Plunger Spring is used with 180418M2 Detent Plunger. It is used on 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces 180417M1, 191221M1, 191221M2 (Item #: 165970, Ref: 180417M1) $1.90

Differential Bearing and Cup - Fits in Differential Lock. Bearing and cup is used on multiple Massey Ferguson Tractors. Replaces original part numbers: 1850087M91, 1850087M92, 1851533M91, 1851533V91, 185773M1, 185775M1, 185776M1, 1857775M1, 1857776M1, 195159M1, 195159V1, 195160M1, 195160V1, 300975M1. (Item #: 179801, Ref: 195159M1) $28.90

Differential Coupling Cap - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 6500H, 670, 6800H, 690, 698, 699, Super 90. (Item #: 172335, Ref: 898712M2) $90.00

Differential Cover - For tractor models 135, 150, 165, 175, 180, 20E, 20F, 2200, 235, 245, 250, 2500, 253, 255, 265, 272, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 670, 690. Replaces 894781M3, 894780M92. (Item #: 173126, Ref: 3759150M1) $199.00

Differential Lock Fork - For tractor models 1080, 135, 165, 175, 180, 20F, 220, 235, 24, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 320, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 173511, Ref: 906807M1) $68.00

Differential Lock Fork Coupler - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 172334, Ref: 897003M3) $77.00

Differential Pinion Gear - Verify that the gear you are replacing has 10 teeth and a 2.92 inch diameter. For tractor models 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 180, 1800, 1805, 203, 205, 2135, 2200, 2500, 302, 304, 3165, 35, 356, 40, 50, 65, 70, 80, 85, 88, Super 90. (Item #: 173507, Ref: 181275M1) $60.00

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 3/16 outside diameter and 0.053 inches thick. Used on 1080, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20C, 20D, 20F, 2135, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285, 290, 298, 30B, 30D, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 372, 375, 382, 390, 390T, 398, 399, 50, 550, 565, 575, 590, 595, 65, 675, 690, 698, 698T, 699, 85, 88, Super 90, TE20, TEA20, TED20, TEF20, TO20 Replaces OEM number 181247M1. (Item #: 173021, Ref: 181247M1) $13.10

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 5/32 inches outside diameter and 0.0625 inches thick. Used on 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 2620, 2640, 265, 2680, 270, 2720, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 385, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50C, 50E, 50F, 50H, 550, 565, 575, 590, 60H, 670, 675, 690, 698, 698T, 699. Replaces 897726M1, 3387282M1 (Item #: 176238, Ref: 897726M1) $9.90

Drive Shaft Retainer Assembly O-Ring - This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Item #: 152375, Ref: 886089M1) $1.30

Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 170391, Ref: 180445M1) $20.87

Gasket, Rear Axle Trumpet Housing - Size is approximately 15-1/4 inches. Fits TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 180, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 2500, 30, 31, 3165, 35, 40, 50, 50, 65. (Item #: 151916, Ref: 183254M1) $4.20

Gear, 1st - This gear is 1st gear for 8 speed transmission. Replaces 520700M1, 183042M1. Gear has 44 teeth and is a 18 spline. For tractor models FE35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 203, 2135, 2200, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 3165, 360, 362, 375, 383, 390, 390T, 40, 40B, 50, 50C, 50D, 50E, 65, (20F, 40E, 50H ALL UK MODELS), 35 GAS/DIESEL, 282 MEX. (Item #: 151828, Ref: 1682688M1) $70.00

Gear, 2nd and 4th - This gear is 2nd and 4th, for an 8 speed transmission. Gear is 36 and 46 teeth, 18 spline. For tractor models FE35, MH50, 1080, 1085, MF11, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 202, 203, 204, 205, 230, 235, 240, 245, 250, 2500, 255, 265, 275, 283, 285, 290, 30, 31, 3165, 35, 40, 40B, 50C, 50D, 550, 565, 575, 590 (65, 765 ALL with MULTI POWER), FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 179620, Ref: 1682691M1) $136.00

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $18.98

Gear, 3rd Mainshaft - 41 tooth, 18 spline. Used in 8 speed transmissions. For tractor models 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Replaces 1660094M1. (Item #: 165945, Ref: 1682690M1) $43.98

Gear, Reduction - 21 teeth, 39 spline. For tractor models 135, 150, 165, 175, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 6500, 6500H, 670, 6800H, 690. (Item #: 172350, Ref: 897005M1) $110.00

Gear, Reverse - For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref: 183040M1) $74.00

Inner Axle Bearing - This Bearing measures 66.7mm (2.626 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces 3955/394A, C9NN4874A, 1-31-741-001, 106639, 8181397, 163044, 81818397, 81826019181, 82958861, C5NN4874B, C5NN4N221B, 86503131, 81818406, 82007077, 1079649M1, 884791M92, 831488M1, 834049M1, 1079403M1, 1851392M91, 1851392M1. Verify OEM number or measurements before ordered. Many model tractors have more than one rear axle configuration. (Item #: 185648, Ref: C9NN4874A) $37.30

Inner Axle Bearing - Measuring 1.024 inch inner width, 3.244 inch inside diameter, 4.941 inch outside diameter, this bearing is used on Massey Ferguson 1080, 1085, 135, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 265, 270, 275, 282, 283, 285, 290, 292, 295, 296, 297, 298, 299, 30, 30B, 30D, 30E, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 410, 420, 440, 445, 460, 465, 475, 492, 50, 50A, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 595, 60H, 670, 675, 690, 698, 698T, 699. Verify measurements or OEM number. Many of the listed models have more than one rear axle configuration. Replace Massey Ferguson part numbers 1881931V91, 1881931M91, 894776M1, 588237M1, 27687, 27620 (Item #: 173235, Ref: 1881931M91) $55.00

Input Housing Gasket - This Gasket replaces part numbers: 188807M2, 512787M2 (Item #: 167235, Ref: 512787M2) $1.90

Input Shaft - This Input Shaft is used in 6 speed transmissions. It is 13.730 inches long and has 26 teeth and 10 splines. It replaces original part number 1862423M3 (Item #: 173299, Ref: 1862423M3) $216.00

Input Shaft Abutment - This part sits between 195513M1 Needle Bearing and 886352M1 Spring. Replaces Massey Ferguson part number ``886353M1 (Item #: 179716, Ref: 886353M1) $12.40

No
Picture
Input Shaft Housing Seal - 2 inch outside diameter x 1.54 inch inside diameter x .28 inches thick. For tractor models 135 UK, 165, 165 UK, 175, 180. (Item #: 165435, Ref: 886673M1) $3.98

Layshaft Housing Gasket - This Layshaft Housing Gasket, also known as Bearing Housing Cap Gasket, is used on some 6 speed, Multi-power and 12 speed Syncromesh transmissions. It replaces OEM part numbers 1004633M1, 181237M1 (Item #: 169496, Ref: 181237M1) $1.50

Lock Nut, Pinion - Used on Massey Ferguson 133, 135, 140, 148, 165, 175, 178, 180, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, 35UK, 40, 4500, 50, 50A, 65, 6500. (Item #: 179636, Ref: 180456M1) $29.40

Mainshaft - Multi power and 6 speed transmission, 18 spline, 12.250 inches long. For tractor models 1080, 1085, 135, 148, 150, 155, 159, 165, 168, 175, 180, 185, 188, 235, 240, 245, 250, 255, 265, 275, 285, 290, 30, 550, 565, 575, 590, (FE135 Coventry). Replaces 520701M3. (Item #: 165944, Ref: 1682542M1) $25.98

Mainshaft - 8 speed transmission, 18 spline, 13.50 inches long. For tractor models 1080, 1085, 1105, 1135, 1155, 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 20C, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 275, 285, 290, 30, 30B, 30D, 31, 360, 362, 40, 40B, 40E, 50C, 50D, 550, 565, 575, 590. Replaces 1870149M1. (Item #: 125332, Ref: 1687643M1) $97.15

Mainshaft - This mainshaft is used on 135, 150, 165, 175, 180, 230, 235, 245 6 Speed Transmissions. It has 18 Splines and is 11.843 Inches Long. It replaces original part numbers 880955M1, 894702M1, 1682663M1. (Item #: 165914, Ref: 880955M1) $17.98

Mainshaft, Heavy Duty, 8 Speed Trans. - 22 tooth, 18 spline, 13.375 inches long. Replaces 1870151M1, 1682448M1. For tractor models 1080, 1085, 135, 148, 155, 158, 165, 168, 175, 180, 185, 188, 240, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 50E, 50H, 550, 565, 575, 590. Replaces 1682448M1, 1870151M1. (Item #: 125331, Ref: 1687642M1) $92.00

Multi Power Input Housing - This Multi Power Input Housing is used on 135, 150, 165, 175, 180, 1080, 1085, 235, 245, 255, 265, 270, 275, 285, 290, 298, 298, 670, 690, 698, 30, 65, 35, 50. Replaces 1860889M1 (Item #: 110786, Ref: 1860889M1) $167.00

Massey Ferguson 180 Multipower Transmission and Related Parts

Multipower Transmission and Related Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Outer Cover Seal - Measuring 4.00 inches outside diameter x 2.875 inches inside diameter, 0.375 inches wide, this is the outer seal on cover. Replaces 894736M4, 834220M1, 894763M5, 894763M2, 894763M3, 894763M4, 3699800M1, 3699800M2, 73119909, 70657582, 0657582, 657582, 6V8172, 2X5156, 8T6917, 1B4327, 1D4327, 304816C91, 290811R92, 71855C1, 270380C91, 643986C91, B132704AB (Item #: 172312, Ref: 834220M1) $17.40

No
Picture
PTO Lift Pivot Shaft - For Massey Ferguson tractor models F40, TO35, 35, 35 (France), 35X (France), 50, 50 (Harris and Massey), 65, 135, 135 (UK), 150, 165, 165 (UK), 175, 175 (UK), 178 (UK), 180, 230, 231, 231S, 235, 240, 240 (S, Turkey), 245, 250, 255, 265, 265S (Turkey), 270, 271X, 271XE, 275, 275 (UK), 281, 281X, 281XE, 282, 283, 283 (UK), 283 (Brazil), 285, 285S (Turkey), 290, 290 (UK), 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 451, 461, 471, 481, 492, 543, 583, 596, 670, 690, 698, 699, 1080, 1085, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 898304M91, (Item #: 176229) $7.70

Pinion Bearing Sleeve - Used with 1862189M1 differential housing. For tractor models 135, 175, 180, 20, 235, 30, 40. (Item #: 173354, Ref: 518881M91) $118.00

Pinion Epicyclic Gear - Replacing Massey Ferguson part numbers 894769M1, 894769V1, 897769M1, 184176M1, this Planetary Gear has 12 Teeth. It is used on tractors models: 135, 145, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 261, 265, 270, 275, 282, 283, 290, 30, 30B, 30D, 30E, 30H, 31, 3165, 375E, 390E, 40, 40B, 40E, 410, 420, 425, 430, 435, 440, 481, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 60, 60H, 65, 670, 675, 690, 765 (Item #: 170397, Ref: 897769M1) $38.98

Pinion Nut Washer - Used on Massey Ferguson models: 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, FE35, 40, 4500, 50, 50A, 65, 6500, 765, 865 (Item #: 183834, Ref: 180455M1) $2.51

Planetary Cover Plate, Front - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. Replaces 180408M2, 180408M1. (Item #: 173500, Ref: 180408M2) $18.30

Planetary Cover Plate, Rear - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 180666, Ref: 184012M4) $21.30

Planetary Pinion Carrier Assembly - 32mm gears, used with 18 tooth shaft. For tractor models (304 early), (175UK, 178UK with multipower transmission serial number up to 728921), (204, 205, 2200, 50 all with hydraulic shuttle transmission), (30 with instant reverse, early), (40 with instant reverse, late), (50A with instant reverse serial number up to DC1222), (2500 with instant reverse serial number up to 9A70308), (180 with 6 speed or multi power transmission serial number CW6805), (148, 168, 185, 188 all with 8 speed or multipower transmission). Replaces 887128AM91, 882503M91. (Item #: 172307, Ref: 1886634M91) $252.00

Planetary Pinion Gear Shaft - The end of this shaft is threaded with a tapered hole for a Set Screw. It measures 1.03 inches in diameter and is 3.26 inches long. Replace Massey Ferguson part numbers 894799M1. Used on Massey Ferguson models: 135, 150, 165, 175, 178, 180, 30, 31, 3165, 375, 383, 390, 390T, 393, 398, 40, 50 (Item #: 180205, Ref: 894799M1) $17.80

Planetary Pinion Gear Shaft - The end of this shaft is threaded with a through hole for a Roll Pin. It measures 1.03 inches in diameter and is 3.26 inches long. Replaces Massey Ferguson part number 1864869M1. Used on Massey Ferguson models: 2500, 4500, 6500, 20E, 20F, 2200, 24, 25, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E. 50F, 50H, 60, 60H, 6500H, 6800H, 135, 150, 165, 165UK, 175, 175UK, 178, 180, 235, 240, 245, 250, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275UK, 281, 282, 283, 290, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 399, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 670, 690 (Item #: 170392, Ref: 1864869M1) $23.40

Planetary Pinion Gear, (Epicyclic) - 12 tooth. For tractor models 135, 150, 165, 175, 178, 180, 203, 205, 20E, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 3165, 356, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50H, 5650, 60, 60H, 65, 6500, 6500H, 670, 6800, 690, 85, 88. (Item #: 170397, Ref: 894769M1) $38.98

Planetary Ring Gear - 45 teeth. For tractor models 135, 150, 165, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30A, 30B, 30D, 30E, 30H, 31, 3165, 40, 40B, 40E, 4500, 50, 50C, 50D, 50E, 50H, 60, 60H, 6500, 670, 690. (Item #: 172320, Ref: 894772M2) $409.00

Planetary Ring Gear Gasket - Two of these gaskets are used per planetary ring gear. Replaces Massey Ferguson part numbers 184182M3, 191141M1 (Item #: 128513, Ref: 191141M1) $7.60

Planetary Ring Gear Thrust Washer - Used on Massey Ferguson 1004, 1004T, 1080, 1200, 1250, 133, 135, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 253, 255, 260, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 40, 40B, 40E, 410, 415, 420, 425, 430, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60, 60H, 60HX, 650, 660, 670, 675, 680, 690, 698, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280. This part is 4.75 inches long and 0.50 wide. Replaces 1866542M1, 894867M1 (Item #: 179689, Ref: 1866542M1) $3.50

Planetary Selector Gearshift - For tractor models: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 173169, Ref: 180446M1) $17.30

Rear Axle Housing Carrier Plate O-Ring - Measuring 317.5mm inside diameter by 2.62mm thick, this o-ring is used on Massey Ferguson 1085, 1200, 1250, 135, 152, 155, 158, 165, 168, 175, 180, 185, 188, 20C, 20D, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 415, 425, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. Replaces OEM numbers 1860838M1, 1860838V1, 1860838M2 (Item #: 173237, Ref: 1860838M1) $4.80

Rear Drive Shaft Needle Bearing - Used on Massey Ferguson models: 1080, 1085, 133, 135, 140, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 283 Brazilian, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 65, 670, 675, 690, 698, 698T, 699. This bearing replaces OEM numbers 195513M1, B1212, S1212 (Item #: 179695, Ref: 195513M1) $22.30

Rear Oil Seal - Rear axle or differential carrier plate oil seal. 3.198 inch outside diameter, 2.125 inch inside diameter, .812 inch width. For tractors: MF65, MF85, Super 90, MF135 orchard, MF150, MF165, MF175, MF180 industrials: 30, 40, 50, 203, 205, 302, 304 also MF1080, MF1085, MF235 orchard, MF255, MF275, MF285 with dry brakes. Used as clutch bearing support assembly seal on tractors: MF2675, MF2705, MF2745, MF2775, MF2805. For 10, 126, 130, 220, 224, 228. (Item #: 128529, Ref: 832954M3) $14.20

Seal, PTO Pinion Shaft Retainer - This PTO Pinion Shaft Retainer Seal measures 1 15/16 inches outside diameter, 1 5/8 inches inside diameter and 1/4 inch wide. Multi-Power Transmission. Replaces 1860867M4, 1860867M5, 1860867M1, 1860867M3 (Item #: 128472, Ref: 1860867M3) $5.50

Seal, Rear Axle, Inner - 3.375 inch outside diameter, 2.350 inch inside diameter, .890 inches wide. For tractor models 1080, 150, 165, 175, 178, 180, 30, 31, 40, (135, 235 Orchards), (1085, 255, 265, 275, 285 all with Dry Brakes). (Item #: 113783, Ref: 894782M2) $17.40

Sealing Ring - This sealing ring is 1-1/2 inch outside diameter and 3/32 inches wide. Two used per input shaft. Replaces Massey Ferguson part number 186581M1. (Item #: 165436) $6.40

Shift Fork, 1st, Reverse, 2nd and 3rd - For tractor models FE35, F40, MH50, TO35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 202, 203, 204, 205, 2135, 2200, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 30, 31, 3165, 35, 50, 65. (Item #: 151023, Ref: 180437M1) $34.40

Shift Fork, 8 Speed - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Item #: 165985, Ref: 897065M2) $30.80

Shift Rail, 1st and Reverse - Replaces: 180442M2. For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 231, 235240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 35, 40, 50, 65, F40, FE135, MH50, TO35 (Item #: 172890, Ref: 1678867M1) $48.11

Shift Rail, 3rd - Replaces 1678865M1. For tractor models 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 31, 40, 40B, 50C, 50H, 50E. (Item #: 182886, Ref: 1678864M1) $41.10

Side Cover Gasket - This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92. (Item #: 112236, Ref: 9N4131) $1.00

Transmission Input Shaft - 10 spline. For tractor models 1080, 1085, 150, 165, 175, 180, 255, 265, 275, 285, 65, 30. Replaces 516523M91, 516523M92 (Item #: 165529, Ref: 516523M91) $120.98

Transmission Rear Axle Gasket - This gasket is used on multiple Massey Ferguson tractors. Dimensions measure 10.750 inches X 16 inches. It replaces original part numbers 1861986M1, 1861986M2, 3599804M1, 3599804M2, 3599804V2, 8884457M1, 181363M1, 521181M1, VPH1405 (Item #: 111906, Ref: 1861986M1) $6.90

Transmission to Differential Shaft Spring - Used with 886353M1 abutment and 195513M1 this spring sits inside the differential input shaft. (Item #: 179661, Ref: 886352M1) $10.30

Universal Parts and Accessories
Category: Drive Train

Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Item #: 108599, Ref: LU10088) $11.40

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Drive Train

[Categories] [All MF180 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy