FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 148 Parts

Category: Drive Train

[Categories] [All MF148 Parts] [All Massey Ferguson Models]

Ball Bearing - This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Item #: 173672, Ref: 195493M1) $23.80

Bearing Seal and Collar Kit, Rear Axle - Contains (1) shrink-on collar 180596M1 (3 inch x 2-1/4 inch x 11/16 inch), (1) axle bearing (cup 300975M1 and cone 195675M1), (1) inner axle seal 195678M2 (2-1/8 inch x 2-7/8 inch x 1/2 inch), (1) outer axle seal 195677M1 (2-3/4 inch x 3-5/8 inch x 19/32 inch). Fits where the above parts are used: TO35, F40, 133, 135, 135UK, 140, 148, 150, 20, 20C, 20D, 2135, 230, 231, 235, 240, 245, 30, 3 165, 340, 35, 35UK, 35X, 50, 550. Verify part numbers. Some of these models were build with more than one rear axle. (Item #: 182552, Ref: S.05948) $105.00

Bearing, Needle - Needle Bearing for countershaft. For 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 265 S (TR), 270, 275, 282, 283, 283 Brazilian, 285 (FR), 285 S (TR), 285 US Built, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 35X, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 40H, 415 Brazilian, 4215, 4220, 4225, 4235, 4245, 425 Brazilian, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 475 Brazilian, 481 Brazilian, 50, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 550, 560, 565, 575, 590, 592, 595, 60H, 60HX, 65, 65 US Built, 670, 675, 690, 698, 698T, 699, 765, 835, 865, Super 90, TO35, Massey Harris 50. Replaces 532883M1, 195453M1 (Item #: 167261, Ref: 195453M1) $10.70

Bearing, Pinion Pilot - For tractor models 135, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11 x 38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11 x 38 differential, 590 with 11 x 38 differential, 65, 675, 690 with 11 x 38 differential, 765, FE35. Replaces 191250M1, 191250V1, 196098M1 (Item #: 117942, Ref: 191250M1) $25.90

Countershaft, Transmission, 17 Spline, 15 Teeth - Shaft is 12.25 inches long. For MultiPower Transmissions on: 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 235, 240, 245, 250, 255, 265, 270, 275, 285, 290, 298, 30, 35, 50, 550, 565, 575, 590, 65, 765, FE135, FE35. (Item #: 173274, Ref: 189391M92) $224.00

Coupling, Wheel - 5.00 inch long, 3 groove, 10 spline. For tractor models 135, 148, 150, 155, 158, 165, 168, 175, 178, 188, 202, 203, 204, 205, 2200, 35, 365, 50, 65, 765, F40, FE135, FE35. (Item #: 160182, Ref: 880069M2) $38.10

Differential Bearing and Cup RH - Bearing and cup set Fits multiple Massey Ferguson Models. (159x108x21mm) Replaces 1850849M91, 1850909M91, 185251M1, 185252M1, 185252V1, 3039248M1, 3039249M1 (Item #: 150360, Ref: 185251M1) $146.00

Differential Cross - sed with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson 894302M1, 6211999M1, 894302M2, 2746135M1, 2746135M2, 181276M1, 588731M1 (Item #: 113612, Ref: 894302M3) $40.42

Differential Gear - The dimensions of this gear in inches are: A - 1 15/16, B - 4 1/2, C - 2 3/4, D - 15/16. It has 14 Teeth, and 39 Splines. Verify measurements before ordering. Used on Massey Ferguson models: 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160 Replaces 885517M1, 885518M1, 885518M4, 885518M2, 885518M5 (Item #: 166930, Ref: 885518M1) $71.00

Differential Input Shaft - Used on Massey Ferguson models: 1080, 148, 152, 168, 265, 275, 290, 298, 375, 375E Brazilian, 390, 390E Brazilian, 390T, 398, 399, 50D, 50F, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. this shaft is 14 5/8 inches long, and as 10 splines on one side and 22 on the other. Includes needle bearing (Item #: 182618, Ref: 1866533M1) $227.00

Differential Pinion Gear - Verify that the gear you are replacing has 10 teeth and a 3.32 inch diameter. For tractor models 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160. Replaces 2746322M1, 897725M1 (Item #: 166937, Ref: 2746322M1) $25.50

Differential Pinion Gear Thrust Washer - Used with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson part numbers 181277M1, 514958M1, 885520M1, 3387281V1, 3387281M1 (Item #: 166940, Ref: 3387281M1) $1.40

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 3/16 outside diameter and 0.053 inches thick. Used on 1080, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20C, 20D, 20F, 2135, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285, 290, 298, 30B, 30D, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 372, 375, 382, 390, 390T, 398, 399, 50, 550, 565, 575, 590, 595, 65, 675, 690, 698, 698T, 699, 85, 88, Super 90, TE20, TEA20, TED20, TEF20, TO20 Replaces OEM number 181247M1. (Item #: 173021, Ref: 181247M1) $13.10

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 5/32 inches outside diameter and 0.0625 inches thick. Used on 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 2620, 2640, 265, 2680, 270, 2720, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 385, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50C, 50E, 50F, 50H, 550, 565, 575, 590, 60H, 670, 675, 690, 698, 698T, 699. Replaces 897726M1, 3387282M1 (Item #: 176238, Ref: 897726M1) $9.90

Drive Shaft Retainer Assembly O-Ring - This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Item #: 152375, Ref: 886089M1) $1.30

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $1.98

Gear Shift Spring Retainer - This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Item #: 126687, Ref: 1861024M1) $13.30

Gear, 2nd - This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Item #: 173295, Ref: 180419M1) $26.10

Gear, 2nd and 4th - This gear is 2nd and 4th, for an 8 speed transmission. Gear is 36 and 46 teeth, 18 spline. For tractor models FE35, MH50, 1080, 1085, MF11, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 202, 203, 204, 205, 230, 235, 240, 245, 250, 2500, 255, 265, 275, 283, 285, 290, 30, 31, 3165, 35, 40, 40B, 50C, 50D, 550, 565, 575, 590 (65, 765 ALL with MULTI POWER), FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 179620, Ref: 1682691M1) $136.00

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $18.98

Gear, 3rd Mainshaft - 41 tooth, 18 spline. Used in 8 speed transmissions. For tractor models 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Replaces 1660094M1. (Item #: 165945, Ref: 1682690M1) $43.98

Gear, Reverse - For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref: 183040M1) $74.00

Input Housing Gasket - This Gasket replaces part numbers: 188807M2, 512787M2 (Item #: 167235, Ref: 512787M2) $1.90

Input Shaft Abutment - This part sits between 195513M1 Needle Bearing and 886352M1 Spring. Replaces Massey Ferguson part number ``886353M1 (Item #: 179716, Ref: 886353M1) $12.40

Layshaft Housing Gasket - This Layshaft Housing Gasket, also known as Bearing Housing Cap Gasket, is used on some 6 speed, Multi-power and 12 speed Syncromesh transmissions. It replaces OEM part numbers 1004633M1, 181237M1 (Item #: 169496, Ref: 181237M1) $1.50

Lock Nut, Pinion - Used on Massey Ferguson 133, 135, 140, 148, 165, 175, 178, 180, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, 35UK, 40, 4500, 50, 50A, 65, 6500. (Item #: 179636, Ref: 180456M1) $29.40

Main Drive Pinion - For tractor models 148, 168, 175, 185, 188, 20C, 20D, 240, 250, 255, 265, 270, 275, 282, 285, 290, 565, 575, 165 STANDARD TRANSMISSION. Main Drive Pinion for 8 speed transmission. Pinion is a 24 tooth, 10 spline, 13.750 inches long. (Item #: 170393, Ref: 964925M3) $142.72

Main Input Shaft Inner Bearing - This bearing is widely used in 12 Speed Synchromesh, Multi Power, 8 Speed Constant Mesh, and 8 speed Synchromesh transmissions. It measures 1 inch inside diameter, 1 5/16 inchs outside diameter, and is 1 inch long. Replaces Massey Ferguson part numbers 2700273V1, 2700273M1 (Item #: 187378, Ref: 2700273M1) $11.00

Mainshaft - Multi power and 6 speed transmission, 18 spline, 12.250 inches long. For tractor models 1080, 1085, 135, 148, 150, 155, 159, 165, 168, 175, 180, 185, 188, 235, 240, 245, 250, 255, 265, 275, 285, 290, 30, 550, 565, 575, 590, (FE135 Coventry). Replaces 520701M3. (Item #: 165944, Ref: 1682542M1) $25.98

Mainshaft - 8 speed transmission, 18 spline, 13.50 inches long. For tractor models 1080, 1085, 1105, 1135, 1155, 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 20C, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 275, 285, 290, 30, 30B, 30D, 31, 360, 362, 40, 40B, 40E, 50C, 50D, 550, 565, 575, 590. Replaces 1870149M1. (Item #: 125332, Ref: 1687643M1) $97.15

Mainshaft, Heavy Duty, 8 Speed Trans. - 22 tooth, 18 spline, 13.375 inches long. Replaces 1870151M1, 1682448M1. For tractor models 1080, 1085, 135, 148, 155, 158, 165, 168, 175, 180, 185, 188, 240, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 50E, 50H, 550, 565, 575, 590. Replaces 1682448M1, 1870151M1. (Item #: 125331, Ref: 1687642M1) $92.00

PTO Coupler - For Massey Ferguson tractor models 133, 135 (457632), 140, 148, 168 (257923), 230, 240, 253, 265, 275, 290, 340, 350, 355, 360, 362 (All With), Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 50, 50C, Replaces Massey Ferguson OEM number 3599630M91, (Item #: 125399) $46.50

Pinion Gear - For 135, 148, 150, 155, 158, 168, 175, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Pinion Gear for 8 speed transmission (28 tooth, 20 splines, 4.350 inch diameter). (Item #: 166038, Ref: 964916M1) $13.98

Pinion Nut Washer - Used on Massey Ferguson models: 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, FE35, 40, 4500, 50, 50A, 65, 6500, 765, 865 (Item #: 183834, Ref: 180455M1) $2.51

Pinion Shaft, Transmission - 17 teeth, 25 splines. For tractor models 135, 148, 150, 155, 158, 165, 168, 185, 188, 20, 20C, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D. Replaces 1868530M91. (Item #: 125326, Ref: 1868531M1) $21.98

Planetary Pinion Carrier Assembly - 32mm gears, used with 18 tooth shaft. For tractor models (304 early), (175UK, 178UK with multipower transmission serial number up to 728921), (204, 205, 2200, 50 all with hydraulic shuttle transmission), (30 with instant reverse, early), (40 with instant reverse, late), (50A with instant reverse serial number up to DC1222), (2500 with instant reverse serial number up to 9A70308), (180 with 6 speed or multi power transmission serial number CW6805), (148, 168, 185, 188 all with 8 speed or multipower transmission). Replaces 887128AM91, 882503M91. (Item #: 172307, Ref: 1886634M91) $252.00

Planetary Ring Gear Thrust Washer - Used on Massey Ferguson 1004, 1004T, 1080, 1200, 1250, 133, 135, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 253, 255, 260, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 40, 40B, 40E, 410, 415, 420, 425, 430, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60, 60H, 60HX, 650, 660, 670, 675, 680, 690, 698, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280. This part is 4.75 inches long and 0.50 wide. Replaces 1866542M1, 894867M1 (Item #: 179689, Ref: 1866542M1) $3.50

Pump to IPTO Clutch Shaft - Used on tractors with Independent PTO, this part replaces Massey Ferguson part number 1868539M1. Used on 1200, 1250, 148, 152, 158, 168, 188, 20E, 240, 250, 253, 265, 275, 285, 290, 298, 375E Brazilian, 390E Brazilian, 40E, 50E, 50EX, 50H, 50HX, 550, 565, 575, 590, 60H, 60HX, 698, 699. (Item #: 182625, Ref: 1868539M1) $112.00

Rear Drive Shaft Needle Bearing - Used on Massey Ferguson models: 1080, 1085, 133, 135, 140, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 283 Brazilian, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 65, 670, 675, 690, 698, 698T, 699. This bearing replaces OEM numbers 195513M1, B1212, S1212 (Item #: 179695, Ref: 195513M1) $22.30

Seal, PTO Pinion Shaft Retainer - This PTO Pinion Shaft Retainer Seal measures 1 15/16 inches outside diameter, 1 5/8 inches inside diameter and 1/4 inch wide. Multi-Power Transmission. Replaces 1860867M4, 1860867M5, 1860867M1, 1860867M3 (Item #: 128472, Ref: 1860867M3) $5.50

Seal, Rear Axle Oil, Inner - This oil seal fits: [Industrial; as an inner rear axle shaft oil seal with dry brakes: 2135, 2200, 3165, MF20, MF20C, MF30 (2 used per tractor, sold individually)], as a transmission input shaft front cover oil seal: 85, 88, Super 90, [as an inner rear axle shaft oil seal with dry brakes: 135, 150, 202, 203, 204, 205, 230, 231, 235, 240, 245, 35, 50, F40, FE35, TO35 (2 used per tractor, sold individually)]; Replaces: 195678M1, 195678M2. 2.125 inches inside diameter, 2.879 inches outside diameter, 0.438 inches wide. (Item #: 108415, Ref: 195678M2) $6.20

Shift Lever Locking Pin - This Shift Lever Locking Pin is used on Ferguson, Massey Harris and Massey Ferguson applications. It replaces OEM part numbers 180581M2, 1678440M1, 180581M1 (Item #: 183009, Ref: 1678440M1) $1.10

Shift Rail, 2nd and 4th - Shift Rail, 2nd and 4th. Replaces 180438M2 For the following tractors: 135, 138, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11x38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11x38 differential, 590 with 11x38 differential, 65, 675, 690 with 11x38 differential, 765, FE35. (Item #: 172896, Ref: 1678866M1) $39.90

Transmission to Differential Shaft Spring - Used with 886353M1 abutment and 195513M1 this spring sits inside the differential input shaft. (Item #: 179661, Ref: 886352M1) $10.30

Universal Parts and Accessories
Category: Drive Train

Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Item #: 108599, Ref: LU10088) $11.40

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Drive Train

[Categories] [All MF148 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy