Clutch Alignment Tool - Clutch alignment tool for 5/8 inch Pilot, 1st stage 1 1/8 inch with 10 splines, 2nd stage 1 3/4 inch with 10 splines. (Item #: 114714, Ref: 1212-1600)$21.40
Clutch Assembly, Dual - Dual Clutch uses 11 inch main disc (1-1/8 inch 10 spline hub) (NOT INCLUDED) and 9 inch PTO disc (1-3/4 inch 10 spline hub) (INCLUDED). Fits 35, 50, 135, 150, Industrials: 35 Turf, 35 Utility, 2135, 20 Turf, 20 Utility, 40. Replaces 526666M91, 512355M91, 193930M92, 184541M94, 533795M91 all having a 1 3/4 inch flywheel offset. (Item #: 122846, Ref: 526666M91)$293.00
Clutch Disc, 11 Inch - 10 Spline 1.125 spline diameter. Feramic, solid. For tractor models 130, 135, 165, 175, 180, 20, 202, 203, 2135, 2165, 2200, 230, 245, 25, 255, 265, 290, 30, 302, 30B, 30D, 3165, 35, 40B, 50 serial number 515396->, 65, TO35 serial number 177395-177519 and 177538->. All with dual clutches. (Item #: 112308, Ref: 185892-RF)$43.00
Clutch Disc, 9 Inch - Clutch disc is 9 inches in diameter with 10 splines on a 1 1/8 inch hub. Used on models 135, 2135, 35, 50, TO35, TE20, TEA20, TO20, TO30, Colt, Mustang, Massey Harris 22, Massey Harris 30 with single clutch. Replaces 760260M91, 180241M91, 180250M91, 181114M91, 193621M91, 825495M91 (Item #: 119397, Ref: A44512)$60.00
Clutch Kit - Clutch Kit contains 181114M91 drive disc that measures 9 inch outside diameter with 1 1/8 inch 10 spline hub, 183209M91 9 inch single pressure plate, 832960M3 pilot bearing, and 195207M1 release bearing and 10 spline x 1 1/8 inch pilot tool. Will not fit on input shaft with 1 3/8 inch 10 Spline end. Note: for TO35 see part number 833085M2 bearing, you may need kit 184827. Replaces 1800263M91, 180263M91, 181114M91. (Item #: 119387, Ref: 1212-1610)$185.00
Clutch Kit - Our new 9 inch complete clutch kit contains: a 9 inch 3 finger, 6 spring pressure plate assembly (183209M91), a 9 inch, 10 spline, 1 3/8 inch hub clutch disc (180250M91), new release bearing (195508M1), new pilot bearing (828123M2), and clutch alignment tool. For tractor models 135, 2135, 35, 50, MH22, MH22K, TE20, TEA20, TO20, TO30. (Item #: 113484, Ref: 1212-6001)$170.00
Clutch Kit - Kit contains 181114M91 drive disc 9 inch outside diameter with 1 1/8 inch 10 spline hub, 183209M91 9 inch single pressure plate, 832960M3 pilot bearing, release bearing 833085M2 (Note: This Release Bearing is 2.49 inches I.D., 4.10 inches O.D., .875 inches wide, 1.535 inches front to back.), and 10 spline x 1 1/8 inch pilot tool. (Item #: 184827, Ref: M185923N833085)$210.00
Clutch Kit, 11 inch - Our new 11 inch double clutch kit includes: 11 inch, 25 spline, double pressure plate assembly with medium springs (532320M91); 11 inch, 10 spline rigid drive disc (516068M92); new pilot (C5NN7600A) and release (83914247) bearings, and clutch alignment tool. For tractor models 150, 165, 175, 175 UK, 178 UK, 180, 20C, 2135, 235, 245, 255, 265, 30, 30B, 30D, 3165, 35, 40B, 50, 65, 97. (Item #: 111060, Ref: 1212-1465)$283.00
Clutch Kit, 11 inch - Our new 11 inch dual clutch kit contains: 11 inch, MEDIUM SPRINGS, double pressure plate assembly with a 9 inch, 10 spline captive PTO disc (526665M91); 11 inch, 10 spline, 1 1/8 inch hub, rigid drive clutch disc (516068M92); pilot (832960M3) and release (892862M2) bearings, and clutch alignment tool. For the following AGRICULTURAL tractor models with MEDIUM TENSION SPRINGS: 150, 165, 175, 175 UK, 178 UK, 180, 20C, 2135, 235, 245, 255, 265, 30, 30B, 30D, 3165, 35, 40B, 50, 65, 97. ***Additional $20.00 shipping due to weight. *** (Item #: 112314, Ref: 1212-1417)$290.00
Clutch Kit, 11 inch - Our new 11 inch dual clutch kit contains: 11 inch, 10 spline double pressure plate assembly with heavy duty springs (526664M91); 11 inch, 10 spline rigid drive disc (516068M92); pilot (832960M3) and release (892862M2) bearings, as well as a clutch alignment tool. This kit has HEAVY TENSION SPRINGS for INDUSTRIAL use on the following tractors: 50, 165, 175, 175 UK, 178 UK, 180, 20C, 2135, 235, 245, 255, 265, 30, 30B, 30D, 3165, 35, 40B, 50, 65, 97. This Clutch Kit weighs 57 pounds. (Item #: 111063, Ref: 1212-1426)$293.00
Clutch Kit, 11 inch, Fine Spline - Our new 11 inch complete clutch kit contains: 11 inch, 25 spline, 1.625 inch hub, standard spring, double pressure plate (532319M91). 11 inch 10 spline, rigid drive disc (516068M93). 9 inch 1 3/4 inch hub PTO disc. Pilot bearing measuring 1.57 inches outside diameter, 0.669 inch inside diameter, 0.472 inch width (832960M3). Release bearing measuring 4.06 inches outside diameter, 2.49 inches inside diameter and 0.870 inch width (892862M2). Clutch alignment tool. For tractor models 135, 150, 165, 175, 175 U.K., 178 U.K., 180, 20, 20C, 2135, 235, 245, 255, 265, 30, 3165, 35, 50, 65, 97, TO35. (Item #: 111060, Ref: 1212-1420)$283.00
Clutch Kit, Dual, Coarse Spline - Includes NEW: 526666M91 Pressure Plate is 11 inch and 10 spline, 516068M93 Clutch Disc is 11 inch and 10 spline, Release and Pilot bearings, and clutch alignment tool. Fits the following tractors that use a 10 spline PTO disc: 135, 150, TO35. This part is for a late production T035 (Serial number 177537 and above). This unit will not fit early production TO35 with stamped finger clutch. Not for Deluxe models. (Item #: 111063, Ref: 1212-1400)$293.00
No Picture
Clutch Kit, Remanufactured, 516068M93 - For Massey Ferguson tractor models F40, TO30 (S/N 177395-177519 and S/N 177538-later), TO35 (S/N 177395-177519 and S/N 177538-later), 35 (S/N 245087-later), 50, 65, 135, 150, 2135, Compatible with Massey Ferguson Construction and industrial models 20 (IND S/N DC2061-later), 202, 203, 302, 304, Replaces Massey Ferguson OEM number 516068M93, 526665M91, Clutch Diameter - 11", Clutch Hub Diameter - 1-1/8", Clutch Splines - 10, Clutch Center - Solid Offset, Clutch Type - Woven, Pressure Plate Size - 11", Pressure Plate Levers - 3, Pressure Plate Springs - 9, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 10, For a New version of this sku use Item #: 122859, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202053)$410.01
Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1)$5.00
Clutch Transmission Disc11 Inch - This is an 11 inch rigid disc with a 10 spline, 1.125 inch hub. It is used in single clutch and split torque clutches. 165, 175, 180, 202 Indust/Const, 203 Indust/Const, 2135 Indust/Const, 2200 Forklift, 2200 Gas, 2500 Forklift, 255, 265, 30 Indust/Const, 31, 3165 Indust/Const, 35, 40B Indust/Const, 4500 Forklift, 50C Indust/Const, 50D Indust/Const, 65 Replaces 189948M91, 513580M92 (Item #: 130134, Ref: 189948M91)$100.00
Pressure Plate Assembly, 11 Inch - This is an 11 inch Pressure Plate for Single clutches used on Massey Ferguson 2200 Forklift, 2500 Forklift, 4500 Forklift, 202 Industrial, 203 Industrial, 2135 Utility, 3165 Industrial, 65 Tractor, Replaces 192196M91 (Item #: 122860, Ref: 192196M91)$430.00
Release Bearing Carrier - Carrier, for clutch release bearing. Carrier bore 2.130 inch (2-1/8 inch approximate); outside diameter 2.503 inch (2-1/2 inch). PLEASE CHECK CARRIER BORE BEFORE ORDERING. For single or dual clutch. Tractors: TO35, MF35, MF50, MF65. Industrials: 20, 202, 203, 302, 2135. Use with bearing 892862M2 for DUAL CLUTCH ONLY. This is the old style for retainers with bronze bushing. (Item #: 165363, Ref: 183129M2)$24.40
Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442)$1989.01
Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888)$1119.01
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
