Break-Away Coupler, Used - For John Deere tractor models 2510, 3020 (s/n 122999-earlier), 4020 (s/n 200999-earlier), 5020, 7020, 7520, Replaces John Deere OEM number AR40587, R34396, For a Remanufactured version of this part use Item #: 204647, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404647)$321.01
Discharge Valve - For John Deere tractor models 2510, 2520, 3010, 3020, 4000 (sn:201000-later), 4010, 4020, 5010, 5020, Replaces John Deere OEM number R27154, (Item #: 118793)$18.00
Front Hydraulic Pump Drive Clamp Half - This Coupler Half measures 5.142 inches overall length, 2 inches wide and has 3/8-16 NC threaded hole. Two used per tractor. Sold individually. If bushings are needed, order R45822 separately. (Item #: 114098, Ref: R34362)$14.70
Hydraulic Coupler Conversion Kit, Female and Male - For John Deere tractor models 1020, 1030, 1130, 1520, 1530, 1630, 2020 (USA models only), 2030 (USA models only), 2040 (USA models only), 2130, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3010 (For Machines Equipped with Dual Block Only), 3020, 3030 (Utility), 3130, 4000, 4010 (For Machines Equipped with Dual Block Only), 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520 (72-75), 8430 (75-78), 8440, Replaces John Deere OEM number RE12121, AR94522, RE206778, Converts John Deere remote couplers to ISO/Pioneer couplers, Includes: Rubber Caps, Style: Cartridge, Style: Lever, Body Size: 1/2", (Item #: 185490)$205.00
Hydraulic Coupler Drive Pin - For John Deere tractor models 2020, 2840, 3020, 3030 (s/n 311078-earlier), 3130 (s/n 311078-earlier), 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 6030, 7020, Compatible with John Deere Construction and industrial models 500, 510, Replaces John Deere OEM number R46345, Threads Into Engine Pulley, Hydraulic pump coupler (2) use Item #: 111302, (Item #: 122100)$6.70
Hydraulic Lever Guide - 2 piece. For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320, 4520, 4620, 6030, 7020, 7520. Replaces R41760. (Item #: 108182, Ref: R41194)$63.00
Hydraulic Oil Filler Cap, Used - For John Deere tractor models 2510, 3010, 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 8430 (s/n 004819-later), 8440, 8630 (s/n 006968-later), 8640, Replaces John Deere OEM nos AR30697, A4233R, Replaces Casting nos R31487, R32715, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498956)$39.01
Hydraulic Pump - Splined shaft. Old fluid needs to be completely flushed-use clean new fluid. 1 1/16 inch Left inlet, 7/8 inch Top Inlet, 1 1/16 inch Right Inlet, 1 1/16 inch Right Discharge. 29.5 GPM. For tractor models (4000, 4020 SN# 258410 and up), (4320 4 WD SN# 014561 and up), (4520, 4620, 4230, 4430, 4630 4 WD), 8430, 8630, (4040, 4240, 4440, 4640, 4840 4 WD), 8440, 8640, 4650, 4850. Replaces AR94661. (Item #: 112640, Ref: S.67567)$1000.00
Hydraulic Pump - For John Deere tractor models 510, 1640, 2040, 2140, 2955, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4520, 4620, 4630, 5010, 5020, 7020, 7520, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 340D, 400, 401, 401C, 401D, 440, 440C, 440D, 444, 448D, 500, 540, 540B, 540D, 544, 548D, 570, 570B, 600, 640, 640D, 644, 646, 700A, 760, Replaces John Deere OEM number AR101807, R101807, Top Inlet: 7/8", Right Inlet: 1-5/8", Discharge: 1-1/16", Left Inlet: 1-1/16", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a Remanufactured version of this sku use Item #: 200413, (Item #: 115599)$980.00
No Picture
Hydraulic Pump - For John Deere tractor models 2130, 3010 (Relief Style), 3030, 3130, 4010 (Relief Style), 4020, 4040, 4240, 4440, 5010 (Relief Style), Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 700A, 760, 760A, Replaces John Deere OEM number AR56160, Top Inlet: 7/8", Right Inlet: -, Discharge: 7/8", Left Inlet: 1-1/16", 50cm, 3.0ci, If transitioning from non-relief to a relief style pump (3010, 4010, 5010) a line kit will be required, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a Remanufactured version of this sku use Item #: 200408, (Item #: 161760)$1179.01
Hydraulic Pump Drive Bushing - For John Deere tractor models 1020, 1520, 1830, 2020, 2030, 2040, 2130, 2510, 2520, 3020, 3030, 3130, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 7020, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Combine (s) 2240, 9400, Compatible with John Deere Harvester (s) 9940, Replaces John Deere OEM number AR49427, R45822, AR34098, For Set of 4 use Item #: 111302, (Item #: 108934)$1.90
Hydraulic Pump Drive Coupler Set, Used - For John Deere tractor models 1830, 2030, 2130, 2840, 3020, 3030 (s/n 311078), 3130 (s/n 311078), 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 5010, 5020, 6030, 7020, 7520, 8430 (1974-1981), 8440, 8630, 8640, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 310A, 401C, 410, 440C, 444, 450, 500, 500A, 500B, 500C, 510, 540, 540B, 570, 600, 640, 644, 646, 670, 670A, 672A, 700, 740, 760, 762, 770A, 772A, Replaces John Deere OEM nos R34362, Set includes 2 of Part No. R34362, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 414098)$15.01
No Picture
Hydraulic Pump Drive Pin, Used - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2440, 2510, 2520, 2630, 2640, 2840, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Combine(s) 2240, Compatible with John Deere Harvester(s) 9940, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 310, 380, 400, 401, 401B, 401C, 410, 440, 440C, 444, 480, 480C, 500, 500C, 510, 540, 540B, 544, 570, 600, 640, 644, 646, 670, 700, 740, 760, 762, 770, Replaces John Deere OEM number R34360, Threads Into Coupler End, For a new version of this item use Item #: 108512, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435397)$1.98
Hydraulic Pump Drive Shaft Coupler, Used - For John Deere tractor models 3020, 4000, 4020, 5010, 5020, Compatible with John Deere Construction and industrial models 400, 500, 600, 670, Replaces John Deere OEM number R34359, AT42311, Length: 4.370", Splines: 14, For a new version of this item use Item #: 108933, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408933)$40.01
Hydraulic Pump Seal and O-Ring Kit - 40cm^3, 50cm^3 with serial plate, this kit is used on pumps that require the teflon sealing washer rather than the quad ring with backup washer, pump models EA1, GA1, GH1. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, (5020 SN# up to 0249999), 7020, 7520, 1830, 2130, 2030, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2350, 2550, 3150, 4050, 4250, 4350, 4450, 2155, 2355, 2555, 2955, 3055, 3155, 3255, 4055, 4255, 4455. (Item #: 114400, Ref: RE29107)$99.33
Hydraulic Pump Seal and O-Ring Kit - 39cm^3, 49cm^3 pump less serial plate. This kit is used on pumps that require the quad ring with backup washer rather than the teflon sealing washer. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, 4320, 4520, 4620, (5020 up to SN# 024999), 7020, 7520, 1830, 2030, 2130, 2630, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2750, 2950. (Item #: 113864, Ref: RE29103)$56.00
Hydraulic Pump, Remanufactured - For tractor models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 700A, 760, 760A, 2130, 3010 Relief Style, 3030, 3130, 4010 Relief Style, 4020, 4040, 4240, 4440, 5010 Relief Style. Hydraulic Pump, Remanufactured. A refundable core charge OF $300.00 will be added to your order. Top Inlet is 7/8 inches, Left Inlet is 1 1/16 inches, Discharge is 7/8 inches. (Item #: 200408, Ref: AR56160-R)$1250.01
No Picture
Hydraulic Pump, Remanufactured, AR101807 - For John Deere tractor models 510, 1640, 2040, 2140, 2955, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4520, 4620, 4630, 5010, 5020, 7020, 7520, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 340D, 400, 401, 401C, 401D, 440, 440C, 440D, 444, 448D, 500, 540, 540B, 540D, 544, 548D, 570, 570B, 600, 640, 640D, 644, 646, 700A, 760, Replaces John Deere OEM number AR101807, R101807, Top Inlet: 7/8", Right Inlet: 1-5/8", Discharge: 1-1/16", Left Inlet: 1-1/16", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a New version of this sku use Item #: 115599, (Item #: 200413)$1223.01
Hydraulic Pump, Remanufactured, RE20839 - For John Deere tractor models 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM number RE20839, AR94661, R71587, Top Inlet: 7/8", Right Inlet: 1-1/16", Discharge: 1-1/16", Left Inlet: 1-1/16", 65cm, 4.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a New version of this sku use Item #: 112640, (Item #: 200415)$1566.77
Hydraulic Pump, Used - For John Deere tractor models 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4650, 4850, 8430, 8440, 8630, 8640, Replaces John Deere OEM nos AR46246, AR94661, AR99839, AR70722, AR73106, Top Inlet: 7/8", Right Outlet: Plugged, Left Inlet: 1-1/16", Discharge: 1-1/16", 65cm, 4.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405068)$890.01
Hydraulic Pump, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520 (Syncro and Quad Range), Replaces John Deere OEM number AR94660, R94660, Top Inlet: 7/8", Right Inlet: 1-1/16", Left Inlet: 1-1/16", Discharge: 7/8", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a new version of this item use Item #: 200411, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400411)$680.01
Hydraulic Pump, Used - For John Deere tractor models 2130, 3010 (Relief Style), 3030, 3130, 4010 (Relief Style), 4020, 4040, 4240, 4440, 5010 (Relief Style), Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 700A, 760, 760A, Replaces John Deere OEM number AR56160, Top Inlet: 7/8", Right Inlet: -, Left Inlet: 1-1/16", Discharge: 7/8", 50cm, 3.0ci, If transitioning from non-relief to a relief style pump (3010, 4010, 5010) a line kit will be required, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a new version of this item use Item #: 112641, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400408)$645.00
ISO Remote Break-Away Coupler, Remanufactured, R34396 - For John Deere tractor models 2510, 3020 (s/n 122999-earlier), 4020 (s/n 200999-earlier), 5010, 5020, 7020, 7520, Replaces John Deere OEM number R34396, With ISO Couplers, (Item #: 205375)$635.01
Pressure Control Valve Assembly, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, 4520, 4620, 7020, 7520, Replaces John Deere OEM nos R40999, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497639)$25.01
Pressure Control Valve Housing, Used - For John Deere tractor models 2510, 3010, 3020, 4010, 4020, 5010, 5020, 6030, Compatible with John Deere Construction and industrial models 340D, 440C, 440D, 448D, 570, 570A, 670A, 672A, 762A, 762B, 770A, 770AH, 862, 862B, Replaces John Deere OEM nos R78495, R40559, One port on bottom of valve, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498395)$50.01
Remote Break-Away Coupler, Remanufactured, AR40587, R34396 - For John Deere tractor models 2510, 3020 (s/n 122999-earlier), 4020 (s/n 200999-earlier), 5010, 5020, 7020, 7520, Replaces John Deere OEM number AR40587, R34396, (Item #: 204647)$715.01
Rockshaft Control Valve Housing, Used - For John Deere tractor models 2510, 3010 (s/n 038060-later), 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), 5010, 5020, 6030, Replaces John Deere OEM nos AR32608, Replaces Casting nos R34011, R42692, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434193)$286.01
Selective Control Valve Lever - For John Deere tractor models 2520, 3020, 4000, 4020, 4320, 4520, 4620, Replaces John Deere OEM number AR40991, (Item #: 115456)$124.00
Selective Control Valve, Remanufactured, AR40827 - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, 4520, 4620, Replaces John Deere OEM number AR40827, 1st or 2nd Valve, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203666)$1350.01
Selective Control Valve, Remanufactured, AR40827 - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, 4520, 4620, Replaces John Deere OEM number AR40827, 1st or 2nd Valve with ISO style couplers, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203717)$1420.01
Selective Control Valve, Remanufactured, AR41023 - For John Deere tractor models 2510, 3020 (s/n 122999-earlier), 4020 (s/n 200999-earlier), Replaces John Deere OEM number AR41023, 1st Valve, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203660)$1260.01
Selective Control Valve, Remanufactured, AR41039 - For John Deere tractor models 2510, 3020 (s/n 122999-earlier), 4020 (s/n 200999-earlier), 5010, 5020 (s/n 024999-earlier), Replaces John Deere OEM number AR41039, 2nd Valve, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203661)$1450.01
Selective Control Valve, Remanufactured, AR44130 - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, 4520, 4620, Replaces John Deere OEM number AR44130, 3rd Valve, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203667)$1583.01
Selective Control Valve, Used - For John Deere tractor models 2510, 3020 (s/n 122999-earlier), 4020 (s/n 200999-earlier), 5010, 5020 (s/n 024999-earlier), Replaces John Deere OEM number AR41023, 1st Valve, For a Remanufactured version of this part use Item #: 203660, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403660)$700.01
Selective Control Valve, Used - For John Deere tractor models 2510, 3020 (s/n 122999-earlier), 4020 (s/n 200999-earlier), 5010, 5020 (s/n 024999-earlier), Replaces John Deere OEM number AR41039, 2nd Valve, For a Remanufactured version of this part use Item #: 203661, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403661)$700.01
Selective Control Valve, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, 4520, 4620, Replaces John Deere OEM number AR40827, Replaces Casting nos R40499, 1st or 2nd Valve, without ISO Couplers, For a Remanufactured version of this part use Item #: 203666, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403666)$570.01
Universal Parts and Accessories Category: Hydraulic System
Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021)$15.20
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12)$11.00
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180)$55.50
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24)$13.50
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30)$16.10
Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Item #: 118260, Ref: H42-2M-36)$16.17
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48)$16.50
Hydraulic Pump Mounting Bracket - This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8 inch diameter, 4-3/16 inch center to center. Also 2 foot mount holes 3/8 inch diameter, 5 inch center to center. Center pilot hole 3-1/4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref: 33020-1)$367.00
Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE A Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref: 40P018LAJSA)$662.00
Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Item #: 112243, Ref: L78-13)$29.80
PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommended hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 120040, Ref: HC-PTO-1A)$1299.01
Universal Pressure Gauge, Hydraulic - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 184977, Ref: GG300)$11.80
Universal Pressure Gauge, Hydraulic - 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1/4 inch NPT male brass fitting. (Item #: 178343, Ref: GG3000)$12.30
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000)$15.90
Universal Pressure Gauge, Hydraulic - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref: GG600)$15.30
Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Item #: 178202, Ref: GG400)$8.98
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60)$15.90
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
