Fuel Gauge - This fuel gauge is for 12 Volt NEGATIVE Ground Systems Only, Gas or Diesel. For 2 inch outside diameter opening, 1 1/2 inches thick gauge housing. It is 30 To 250 OHM Rating. Used on the following: 2520, (3020 serial number 123000 and up), (4020 serial number 201000 and up), 4320, 4520, 4620, (500A serial number 123114 To 152141), 500B, (5020 serial number 025000 and up), 6030, 7020, 7520; Replaces: AR45436, AT375294 (Item #: 108062, Ref: AT375294)$41.77
No Picture
Fuel Sending Unit - Fuel Tank Sending Unit for tractor models (3020 Serial number 123, 000 and up), (4000 and 4020 serial number 201, 000 and up), 4320 and (Industrial 600 serial number 201, 000 and up). (Item #: 115547, Ref: AR46268)$50.00
Sending Unit Gasket - The dimensions of this rubberized cork gasket are:1.715 inch inner diameter, 2.850 inch outside diameter, 0.191 inch thick, and there are five (5) � inch screw holes. Replaces 1015335M1, 101611A, 10A29269, 10A7362, 10A9818, 158046A, 189605M1, 189605M2, 189605M3, 239789, 241522, 29-12, 30-3048772, 369154R1, 70140C1, 70239789, 70241522, A11822, A61161, F2418R, R27181 (Item #: 165414, Ref: 189605M1)$3.00
Tachometer Cable Core - For John Deere tractor models 3010, 3020 (s/n 122999-earlier), 4000, 4010, 4020, 4320, 4520, 4620, 7020, Compatible with John Deere Construction and industrial models 500, 500A, 600, Replaces John Deere OEM number AR28589, Length: 32.5", Square drive end: 0.104", Round end: 0.155", Round end shoulder: 0.200", (Item #: 121543)$21.50
Tachometer Cable, Used - For John Deere tractor models 500, 600, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, 4320, 4520, 4620, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, Compatible with John Deere Construction and industrial models 500A (s/n 123113-earlier), Replaces John Deere OEM number AR26721, AR28588, Length: 33-1/2", Load End: .78", Drive End: .55", Vinyl, For a new version of this item use Item #: 108041, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408041)$19.01
Tachometer Gauge, Used - For John Deere tractor models 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 (all with Syncro Range Transmission), Compatible with John Deere Construction and industrial models 700, Replaces John Deere OEM number RE206855, AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, White Needle, Contains provision for back light, For a new version of this item use Item #: 121305, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499388)$119.01
Tachometer Gauge, Used - For John Deere tractor models 3010, 4000, 4010, 4020, 4320, 4520, 5010, 5020, 6030 (all with Syncro-Range), Replaces John Deere OEM number AR50402, Includes Slot For A Bulb, For a Remanufactured version of this part use Item #: 207139, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 407139)$158.01
No Picture
Tachometer Gauge, Used - For John Deere tractor models 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 (all with Syncro Range Transmission), Compatible with John Deere Construction and industrial models 700, Replaces John Deere OEM number RE206855, AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, Red Needle, Contains plug in back for fiber optic lights, For a new version of this item use Item #: 114510, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 414510)$83.01
Tachometer Knob - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number AR40802, AR30282, (Item #: 126743)$11.00
Tachometer With Red Needle - This tachometer with red needle was used thru 1968. It has no provision for illumination or fiber optics. It is used on the following Gas and Diesel Tractors with Syncro range transmission: 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, Industrial 700. Replaces original part numbers: AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, RE206855, AR50402 (Item #: 114510, Ref: RE206855)$140.40
Tachometer With White Needle - This tachometer with white needle has the provision for illumination and fiber optics. It is used on the following Gas and Diesel Tractors with Syncro range transmission: 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, Industrial 700. Replaces original part numbers: AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, RE206855 (Item #: 121305, Ref: AR50406)$147.00
Transmission Oil Temperature Gauge - For tractor models (3020 SN# 123000 and up), (4020 SN# 201000 and up), 4320, 4520, 4620. (Item #: 108063, Ref: AR46979)$45.00
Water Temperature Gauge - For tractor models 2520, (3020 SN# 123000 and up), 4000, (4020 SN# 201000 and up), 4320, 4520, 4620, 7020. (Item #: 108064, Ref: AR48640)$37.00
Universal Parts and Accessories Category: Gauges
Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. (Item #: 182559, Ref: AMG60)$17.00
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771)$58.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672)$41.00
Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch -24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Item #: 121625, Ref: UNI523)$32.14
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095)$14.90
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Item #: 178134, Ref: IHS626)$14.90
Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Item #: 101927, Ref: SSW0002)$18.70
Temperature Gauge - Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Item #: 186993, Ref: 1042944)$25.30
Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Item #: 178102, Ref: UTG50)$22.00
Temperature Gauge, Universal - Heat Indicator for 2 inch mounting hole. Complete assembly with bracket and adaptors. Numeric Face. 70 inch metal wrapped capillary line installs in block, head or hose. Dial calibrated to 250 degrees. Fits all liquid cooled engines. (Item #: 178124, Ref: UTG25)$19.60
Three Gauge Cluster - This universal set includes a Temperature Gauge, Amp Gauge and Oil Pressure Gauge in a chrome bezel. Gauges can be rotated in the bezel to mount a various angles. -60 to 60 Ammeter, 0 to 80 Oil Pressure, 100 to 220 Water Temperature (Item #: 134029)$32.00
Voltage Gauge - Reads 8-16 volts. Fits 2" diameter hole. Lighted. Two post mounting bracket. Black background. (Item #: 101928)$19.80
Voltmeter, 12 Volt, Lighted Dial - Voltmeter-Gauge has 8 volt to 16 volt range, lighted dial, fits 2 inch diameter hole. For tractors that use 12 volt electrical system. Chrome bezel with black background, white letters and white pointer. (Item #: 178013, Ref: VOLT12LT)$44.00
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
