Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Item #: 157279, Ref: R28794)$8.60
Air Cleaner Stack - This air cleaner stack fits tractor models: G, 620, 630, 720, and 730. It measures 23-3/4 inches tall, has a 4 hole mounting flange and Replaces: AF656R, AR20668R. (Item #: 111437, Ref: AF656R)$132.00
Air Cleaner Stack - For models 630, 730 that use stack with pre-cleaner. Used with AF3580R pre-cleaner. Replaces AR20669R (Item #: 182847, Ref: AF20669R)$85.00
Air Precleaner Assembly - For 520, 530, 620, 630, 720, 730. Air Precleaner Assembly. 7 Inch Diameter, 3 inch ID base. (3817R) (Item #: 109938, Ref: AF3580R)$106.42
Air Stack Muffler Spacer Block - For 620, 630, 720, 730. (Item #: 179448, Ref: R21057R)$52.00
Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is used on Marvel Schebler Carburetor DLTX106. It contains all the parts shown. Verify carburetor number before ordering. (Item #: 185365, Ref: R8212)$195.00
Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Comes with VITON needle float valve. Carburetor manufacture numbers: DLTX81, DLTX82, DLTX84, DLTX85 and AA5344R, For 60, 620, 630, 70, 720, 730 (Item #: 121236, Ref: BK35V)$31.00
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: DLTX81, DLTX84, DLTX109u. 1/8 inch fuel inlet. For the following tractor models: 60, 620, 630. Add $150.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203284, Ref: 1520-CARB)$370.01
Donaldson Style Pre - For John Deere tractor models 520, 530, 620, 630, 720, 730, Painted Green, For 3" O.D. Pipe, Comes Without Screen, (Item #: 109937)$88.00
Fuel Cap with Red Rubber Cover - For John Deere tractor models 50 (sn:5018450-later), 50, 60 (sn:635350-later), 60, 70, 320, 330, 420, 430, 435, 520, 530, 620, 630, 720, 730, 830, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (sn:122999-earlier), 3020, 4000, 4010, 4020 (sn:200999-earlier), 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Compatible with John Deere Construction and industrial models 400, 440 (Crawler), 440, 480 (Loader/Backhoe), Replaces John Deere OEM number R27183, AT20911, Includes red rubber cover and gasket, Red rubber cover outer diameter: 4.040", 1.775" tang-to-tang length, 0.250" tang width, 1.455" inside center diameter, Cap is 1.375" tall, For replacement cover use Item #: 126626, (Item #: 126517)$32.00
Fuel Filler Grommet - 2-1/2" I.D., 4-1/2 O.D.. For tractor models early 50, 60, 70 and 60, 620, 630 orchard models. (Item #: 126663, Ref: A5137R)$28.70
Fuel Strainer - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number R10159, (Item #: 150408)$54.00
Grommet, Fuel Filler, Black - For tractor models 70, 620, 630, 720, 730, 1020, 1520, 2020, 3010, 3020, 4010, 4020, 5010. Measures 3 7/8 inch outside diameter, 2 1/4 inch inside diameter, and 3 1/2 inch diameter on underside lip. (Item #: 109934, Ref: A5157R)$14.60
Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: M, MC, MT, 320, 330, 40, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730, 2010. Replaces 233-543. (Item #: 179751, Ref: C3NN9D532A)$6.50
Precleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Item #: 168690, Ref: AF3583R)$28.00
Red Rubber Cover Only - For John Deere tractor models 50 (s/n 5018450-later), 60 (s/n 635350-later), 70 (gas), 320, 330, 420, 430, 435, 480, 520, 530, 620, 630, 720, 730, 820 (3 Cylinder), 830 (3 Cylinder), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (s/n 122999-earlier), 4000, 4010, 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Replaces John Deere OEM number R27183, For fuel cap with cover use Item #: 126517, (Item #: 126626)$18.00
Sediment Bowl Assembly - With Automatic shut-off. For tractor models (50 gas from SN# 5016133 and up), (A gas from SN# 584000 and up), (60 gas from SN# 6028469 and up), 520, 530, 620, 630, (70 gas from SN# 7006494 and up). (Item #: 163282, Ref: AA5777R)$152.00
Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, 50, 520, 530, 60, 620, 630, 70, 720, 730, 2010, 4030, 4230. Replaces C1777R. (Item #: 105365, Ref: S.65504)$6.10
Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: L885T (Item #: 105364, Ref: 49923D)$3.30
Sediment Bowl Screen - 2" - For John Deere tractor models A (Styled and Unstyled), AI (Unstyled), ANH (Styled and Unstyled), AW (Styled and Unstyled), B (Styled and Unstyled), BN (Styled and Unstyled), BNH (Styled and Unstyled), BO (Unstyled), BR (Unstyled), BW (Styled and Unstyled), BWH (Styled and Unstyled), D (Styled and Unstyled), G (Styled and Unstyled), GH (Styled and Unstyled), GM (Styled), GN (Styled and Unstyled), H (Styled), HNH (Styled), HWH (Styled), 50 (Automatic Shut Off), 60 (Automatic Shut Off), 70, 80 (Pony Start Diesel), 520 (Automatic Shut Off), 530 (Automatic Shut Off), 620 (Automatic Shut Off), 630 (Automatic Shut Off), 720, 730, 820 (Pony Start Diesel), 830 (Pony Start Diesel), 840 (Pony Start Diesel), Compatible with John Deere Combine (s) 55, Replaces John Deere OEM number AA519R, (Item #: 121909)$5.70
No Picture
Speed Control Plate - With linings. For tractor models (520 from SN# 5208100 and up), (620 from SN# 6213100 and up), (720 from SN# 7214900 and up), 530, 630, 730. Replaces RE227867. (Item #: 121857, Ref: AF3847R)$37.00
Speed Control Rod End Joint - Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Item #: 178588, Ref: AA5302R)$15.80
Vent Tube and Radiator Overflow Packing - This packing installs in the nut that is on either end of your vent tube or one end of your radiator overflow tube. It is used on John Deere A, B, D, G, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830. Replaces John Deere Part Number B60R (Item #: 183845, Ref: B60R)$7.50
Universal Parts and Accessories Category: Fuel System / Air Intake
Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553)$5.50
Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Item #: 178125, Ref: CC72)$19.30
No Picture
Choke Cable Swivel - Choke cable swivel attaches the choke inner cable to the choke lever. Used on tractors with a choke cable. (Item #: 184016, Ref: CT28-49)$15.80
Engine Heater, Tank Type - 1500 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 30-40 quart capacity liquid cooled engines. (Item #: 107378, Ref: GE1500)$120.00
Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Item #: 107976, Ref: R2043)$70.00
Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Item #: 112528, Ref: NR1259)$110.00
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949)$9.40
Fuel Tank Webbing, 3 Ft - Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Item #: 178009, Ref: FTW494)$5.30
Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Item #: 180786, Ref: LU10003)$13.30
Main Load Adjusting Needle Assembly - Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Item #: 111767, Ref: CT43-622)$55.00
Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2 inch pipe inside diameter, 6 inch bowl and is 11-1/2 inches tall. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185438, Ref: S66397)$21.30
Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2.25 inch pipe inside diameter, 7 inch bowl and is 9-1/2 pipe. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185439, Ref: C0NN9A660A)$32.00
Pre Cleaner Assembly, Turbo 2-3 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 51, 57, 64, 71, 76mm (2-3 inch) with multiple adapters. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC23)$94.68
Pre Cleaner Assembly, Turbo 5 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 5 inch pipe. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC5)$137.82
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R)$3.90
Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Item #: 109399, Ref: PTSTOP)$11.20
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
