FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere A Parts

Category: Clutch

[Categories] [All A Parts] [All John Deere Models]

$John Deere A Castle Nut - 1\2 inch$
Castle Nut - 1/2" - For John Deere tractor models A (s/n 647999-earlier), AO (s/n 273079-earlier), AR (s/n 273079-earlier), 50 (s/n 5020400-later), 520, 530, Replaces John Deere OEM number A335R, 14H994, AA4967R, B3279R, 1/2" -20 NF, (Item #: 126122) $2.20

$John Deere A Castle Nut - 9\16 inch$
Castle Nut - 9/16" - For John Deere tractor models A (s/n 648000-later), AO (s/n 273080-later), AR (s/n 273080-later), G, R, 60, 70, 80, 620, 630, 720, 730, 820, 830, 840, Replaces John Deere OEM number R20228, 14H862, AD2850R, D2789R, 9/16" - 18NF Grade 5, (Item #: 126123) $3.30

Clutch Adjusting Disc - Made from ducitle iron. Will not crack under stress like the original grey cast iron design since ductile iron has far more tensile strength. This part is used on John Deere A up to serial number 647000, AO up to serial number 273079, AR up to serial number 273079. (Item #: 167578, Ref: A20R) $83.00

Clutch Adjusting Spring - This Clutch Adjusting Spring measures 1.915 inches long with a 0.120 inch wire thickness. The clutch disc adjusting spring mounts to the outer cast iron adjusting disc. Three used per tractor. Sold individually. (Item #: 118280, Ref: A352R) $3.00

Clutch Cover - For A after SN# 648000, G after SN# 13804, 60, 620, 630, 70, 720, and 730. Not painted. This part has an I.D. of 12.1875 inches by 1.0625 inches Thick. Please verify size before ordering. Does not include springs part number R5071. Also Replaces F821R. (Item #: 105719, Ref: F821) $40.00

Clutch Cover Spring - Comes with rivet, 3 required per tractor sold individually. For tractor models A, G, 60, 520, 530, 620, 630. Replaces: Rivet 16H644, Spring A6121R (Item #: 126162, Ref: A6121R) $16.00

Clutch Disc Drive - 20 tooth, 6 spline, 9.940 inch diameter. For JD A tractor. (Item #: 105726, Ref: A4028R) $131.50

Clutch Disc, Remanufactured - For John Deere tractor model A, Compatible with John Deere Construction and industrial model 760, 770, Clutch Size: 13", Clutch Hub: 1-3/8", Clutch Spline: 21, Clutch Center: Spring, Clutch Type: Woven, (Item #: 205777) $410.01

No
Picture
Clutch Drive Disc - Clutch drive disc. For tractor model A. For A (Item #: 105726, Ref: TP-A4028R) $131.50

Clutch Drive Disc - Replaces OEM#s A2448R, AA2279R or AA232R. For model A (Serial# 488000 thru 647999), AR, AO (up thru Serial# 273079) (Item #: 112133, Ref: R2392) $187.00

Clutch Drive Disc - For tractor models A (From SN# 648000), AO, AR (From SN# 273080). Replaces A4028R, and AA4635R. (Item #: 105726, Ref: R0725) $131.50

Clutch Facing - Pulley clutch facing. Floating. For tractor models A, G, 60, 70, 620, 630, 720, 730. 10 inch outside diameter, 6-3/4 inch inside diameter, 1.575 inch wide, .15 inch thick. For 60, 620, 630, 70, 720, 730, A, G. Replaces: C614R, R90215. PRICED EACH. If you order 1, you will receive only 1 clutch facing. (Item #: 105721, Ref: TP-C614R) $12.30

Clutch Facing, Pulley - Fits A serial number 648000 and up - 1 used per tractor, G - 1 used per tractor, 60 - 1 used per tractor, 70 - 2 used per tractor, 630 - 1 used per tractor, 730 - 2 used per tractor, AO serial number 273080 and up - 1 used per tractor, AR serial number 273080 and up - 1 used per tractor, D serial number 109944 and up - 1 used per tractor, 620 - 1 used per tractor, 720 - 2 used per tractor. Sold individually. Replaces AA6129R, AD1027R, AD752R, RE22932, RE29779. (Item #: 105718, Ref: AA6129R) $43.00

Clutch Handle Bushing - Used with D2031R Clutch Handle Pivot Bolt, this bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Replaces A1197R and R51192 Use on 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. (Item #: 126143, Ref: A1197R) $9.00

Clutch Handle Pivot Bolt - The measurements on this Clutch Handle Pivot Bolt 0.750 inches O.D. to 0.625 inches O.D. 4-1/4 inches length. Replaces D2031R and R121197. Used on John Deere 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. Uses Bushing A1197R (Item #: 114893, Ref: D2031R) $21.30

Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models (A up to SN# 647999), (AO, AR up to SN# 273079). (Item #: 126148, Ref: A135R) $35.50

Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models (A from SN# 648000 and up), (AO, AR from SN# 273080 and up). (Item #: 126149, Ref: A4031R) $33.40

Clutch Pin - Clutch linkage pin. Made in the USA, 9/16" diameter, 1/16" oversized to compensate for wear, use 9/16" drill to ream orginal hole, two used per tractor. For tractor models A, D, R, G, 60, 70, 520, 530, 620, 630, 720, 730. (Item #: 178321, Ref: D1994R) $12.10

Clutch Plate - Replaces OEM# A4355R. For A, D, G, 60, 620, 630, 70, 720 (Item #: 105720, Ref: R0724) $65.00

Clutch Plate - For tractor models: (A, AN, ANH, AW, AWH all serial number 648000 and up), (AO and AR serial number 273080 and up), G. 9-7/8 inch diameter by 0.375 inch thick. 1 Used Per Tractor. Replaces: F195R (Item #: 109780, Ref: F195R) $79.30

Clutch Pulley Brake Pad - For tractor models A, B, 50, 520, 530, 60, 630, 70, 720, 730. Sold individually. Replaces: AB4748R, AF4748R, RE29790 (Item #: 108125, Ref: RE29790) $12.40

Dog, Clutch - For tractor models 620, 630, 70, 720, 730, A, AO, AR, D, G, GH, GN, GP, GW. Trhee required per tractor. (Item #: 126127, Ref: C74R) $33.10

Pressure Plate Spring Washer - For John Deere tractor models A, B, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 840, I.D. 0.572, O.D. 0.937, Thickness 0.035, Steel Spring, (Item #: 126159) $3.30

Universal Parts and Accessories
Category: Clutch

Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $1969.01

Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1119.01

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories] [All A Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy