Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 4020 Parts

Category: Hitch / Drawbar

[Categories]   [All 4020 Parts]   [All John Deere Models]  


John Deere 4020 Bushing, Load Control
Bushing, Load Control
- For John Deere tractor models 4010, 4020, Compatible with John Deere Construction and industrial models 600 (s/n 200999-earlier), Replaces John Deere OEM number R26502, (Item #: 170422) $20.10

John Deere 4020 Cat II Top Link
Cat II Top Link
- Category 2 Quick Release Top Link with Knuckle. Extends from 25 inches to 33.5 inches. Barrel length 12 inches, includes clip, 1-1/4 inch NC threaded ends. Knuckle has 7/8 inch hole. For standard and row crop models. For tractor models 2510, 2520, 3020, 4000, 4020 (To S#24999) 4030, 4230. Uses F2680R Cat I Ball End or F2681R Cat II Ball End. Ball ends are not included. Replaces a 34208, TPPM03481, TP-AR34208, PM03481, and AR34208. (Item #: 102072, Ref: AR34208) $165.00

John Deere 4020 Center Link Assembly
Center Link Assembly
- For John Deere tractor models 4000 (s/n 250001-earlier), 4020 (s/n 250001-earlier), 4230 (Hi-Crop), 4240 (Hi-Crop, s/n 006627-later), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop, s/n 013166-later), 8430, Replaces John Deere OEM number RE44560, (Item #: 170299) $131.00

John Deere 4020 Center Link Body
Center Link Body
- Part number R47067 measures 10.750 inches long. It has 1.375 inch -8 thread. Left hand thread on one side, right hand thread on the other. Used on John Deere: 4000 Serial Number 250001 and up, 4020 Serial Number 250001 and up, 4230 HI-CROP, 4320, 4430 HI-CROP, 4440 Serial Number 013166 and below, 4520 Serial Number 010019 and up, 4620, 4630 Serial Number 030390 and below, 5020 Serial Number 028137 and up, 6030, 7020, 7520. (Item #: 170285, Ref: R47067) $102.00

John Deere 4020 Center Link Body
Center Link Body
- For John Deere tractor models 2941, 2951, 3141, 3351, 3641, 3651, 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4040 (s/n 002862-earlier), 4230, 4240 (s/n 006627-earlier), 4320, 4430, 4455, Replaces John Deere OEM number R51524, R47887, Length: 12.25", Thread: 1.375"- 8, UNC Left Hand/Right Hand, (Item #: 170290) $116.00

John Deere 4020 Center Link Body Only
Center Link Body Only
- For John Deere tractor models 2510, 2520, 3010, 3020, 4000 (s/n 201000-later), 4010, 4020, 4020 (s/n 201000-later), 4030, 4230, 4520, 5010, 5020, Replaces John Deere OEM number R47524, R26811, Length: 10.75", Thread: 1.250"- 7, UNC LH/RH, (Item #: 170288) $95.00

John Deere 4020 Center Link Bracket, Used
Center Link Bracket, Used
- For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4230, Replaces John Deere OEM nos R39759, R33860, Replaces Casting nos R31620, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498955) $25.01

John Deere 4020 Center Link End, Hook
Center Link End, Hook
- For John Deere tractor models 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4040, 4230, 4320, 4430, 4440, Replaces John Deere OEM number AR61659, 1.375 " - 8 Right Hand UNC Thread, (Item #: 170270) $182.00

John Deere 4020 Center Link Handle
Center Link Handle
- For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 600, 700A, Replaces John Deere OEM number R42495, R27007, (Item #: 164548) $8.80

No
Picture
Draft Link, Early - Left Hand
- For John Deere tractor models 4000 (s/n 201000-later), 4010, 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4320, Replaces John Deere OEM number AR65382, AR26945, RE44094, AR26554, Replaces John Deere Casting number R26907, R106780, (Item #: 165786) $440.00

No
Picture
Drawbar
- For John Deere tractor models 4000, 4020, 4030, 4040, 4230, 4320, 4430, Replaces John Deere OEM number R80842, Offest without hammerstrap holes, Length: 45.00", Width: 2.50", Thickness: 1.375", 6 front holes 1.015" diameter. 1.375", 2.625", 4.687", 7.345", 9.325", 12.590" from the front, (Item #: 108948) $158.00

No
Picture
Drawbar
- Straight 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, and 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430. (Item #: 108947, Ref: R3097) $110.00

No
Picture
Drawbar
- 2 Offset with Hammer Strap Holes 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, and 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Item #: 108521, Ref: R3098) $155.00

No
Picture
Drawbar
- 2 Offset without Hammer Strap Holes 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, and 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Item #: 178339, Ref: R3099) $216.00

John Deere 4020 Drawbar Hanger
Drawbar Hanger
- Used on John Deere models 4000, 4020, 4040, 4230, 4320, 4430, 4455, this hanger is used with RE20663 and R80843 drawbars. (Item #: 108905, Ref: AR33911) $170.00

John Deere 4020 Drawbar Pin, Front
Drawbar Pin, Front
- For tractor models 2510, 2520, 3020, 4000, 4010, 4020, 4030. All Hi-crop or Row-crop models. (Item #: 121855, Ref: AR27599) $39.00

John Deere 4020 Drawbar Pin, Front
Drawbar Pin, Front
- Used with Wide Swinging Drawbar on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. 3.307 inches overall length, 2.323 inches shank length, 1.25 inch diameter, 1 inch shank diameter. (Item #: 121853, Ref: R56728) $18.00

John Deere 4020 Drawbar Support Load Sensing Bushing
Drawbar Support Load Sensing Bushing
- Used with AR76096 and AR83603 Front Drawbar Supports, this bushing replaces John Deere part numbers R71476 and R41084 (Item #: 168089, Ref: R71476) $23.10

John Deere 4020 Drawbar Support, Used
Drawbar Support, Used
- For John Deere tractor models 4000, 4020, 4040, 4230, 4320, 4430, 4455, Compatible with John Deere Combine(s) 7701, Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number AR33911, Used With RE20663 and R80843 Drawbars, For a new version of this item use Item #: 108905, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408905) $107.01

John Deere 4020 Drawbar, Offset
Drawbar, Offset
- 2.50 Offset - Heavy Duty 1.250 x 2.50 x 44.750 (1.010" Holes at 1.060, 2.310, 4.360, 7.050, 9.050 and 12.30 inches). For 2510, 2520, 4000, 4010, 4020, 4030HD, Hi-Crop 3020, 4010 HD Hi-Crop, HD Row Crop with Std Wide Swing. (Item #: 121854, Ref: R81576) $132.00

John Deere 4020 Drawbar, Swinging
Drawbar, Swinging
- This Drawbar has a 2.50 Inch Offset, 45.00 overall length, 2.50 inches wide, 1.375 inches thick. Additional $10 shipping due to size and weight. Replaces original part numbers R34448, RE20663 (Item #: 108521, Ref: RE20663) $155.00

John Deere 4020 Drawbar, Used
Drawbar, Used
- For John Deere tractor models 4000, 4020, 4030, 4040, 4230, 4320, 4430, Replaces John Deere OEM number RE20663, R34448, Length: 45.00", Width: 2.50*, Thickness: 1.375", 6 front holes 1.015" diameter. 1.375", 2.625", 4.687", 7.345", 9.325", 12.590" from the front, With Hammer Strap Holes, For a new version of this item use Item #: 408948, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408521) $83.01

John Deere 4020 Drawbar, Used
Drawbar, Used
- For John Deere tractor models 4000, 4020, 4030, 4040, 4230, 4320, 4430, Replaces John Deere OEM number R80842, Offest without hammerstrap holes, Length: 45.00", Width: 2.50", Thickness: 1.375", 6 front holes 1.015" diameter. 1.375", 2.625", 4.687", 7.345", 9.325", 12.590" from the front, For a new version of this item use Item #: 408521, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408948) $87.01

John Deere 4020 Front Drawbar Dowel Pin
Front Drawbar Dowel Pin
- This Dowel Pin is 3 inches long with a 0.75 inch diameter. Used on John Deere 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121851, Ref: R26503) $6.10

No
Picture
Front Drawbar Dowel Pin, Used
- For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R56728, Overall Length: 3.307", Shank Length: 2.323", Diameter: 1.25", Shank Diameter: 1", For a new version of this item use Item #: 121853, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435795) $10.01

John Deere 4020 Front Drawbar Pin
Front Drawbar Pin
- Used on John Deere models 2510, 2520, 3020, 4000, 4020, 4030 serial number 007442 and before, 4230 serial number 015452 and before, 4320, 4430 serial number 021269 and before, 500, 500A, 500C serial number 192951 and before, 600. This Pin has a 1 inch diameter. Replace John Deere part numbers AR44189, AR32826 (Item #: 115536, Ref: AR44189) $34.40

John Deere 4020 Front Drawbar Support
Front Drawbar Support
- When replacing this part, you will likely need the following bushings: R31438 x 1, R40557 x 1, R40558 x 1, R71476 x 2. They are each sold individually. This Front Drawbar Support is used on John Deere models: 4020 serial number 201000 and up, 4040, 4230, 4320, 4430 (Item #: 121449, Ref: AR83603) $849.00

John Deere 4020 Front Drawbar Support Mounting Pin Bushing
Front Drawbar Support Mounting Pin Bushing
- Used on John Deere models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 500, 500A, 500C, 600, this bushing replaces OEM numbers R31438, R27325 (Item #: 114095, Ref: R31438) $5.20

John Deere 4020 Front Drawbar Support, Used
Front Drawbar Support, Used
- For John Deere tractor models 4010, 4020 (s/n 200999-earlier), Replaces John Deere OEM nos AR31559, AR26461, AR40402, Replaces Casting nos R26582, R32330, R33824, R40556, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499531) $135.01

John Deere 4020 Front Drawbar Support, Used
Front Drawbar Support, Used
- For John Deere tractor models 4000, 4020, 4040, 4230, 4320, 4430, Replaces John Deere OEM nos AR83603, AR57097, AR60944, Replaces Casting nos R65533, R53559, R53561, R65535, R53560, R52474, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499631) $540.01

John Deere 4020 Front Pull Arm Pin
Front Pull Arm Pin
- For John Deere tractor models 2510 (Hi-Crop), 2520 (Hi-Crop), 3010, 3020 (Hi-Crop), 4000 (Hi-Crop), 4010 (STD, Row Crop, Hi-Crop), 4020 (Hi-Crop), 4050 (s/n 1000-6509 Hi-Crop), 4230 (Hi-Crop), 4240 (Hi-Crop), 4250 (s/n 1000- Hi-Crop), 4255 (Hi-Crop), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop), 4520, 4620, 5010, 5020 (025000>), 6030, 7020, Replaces John Deere OEM number R26609, (Item #: 114090) $11.80

No
Picture
Front Pull Arm Pin, Used
- For John Deere tractor models 2510 (Hi-Crop), 2520 (Hi-Crop), 3010, 3020 (Hi-Crop), 4000 (Hi-Crop), 4010 (STD, Row Crop, Hi-Crop), 4020 (Hi-Crop), 4050 (s/n 1000-6509 Hi-Crop), 4230 (Hi-Crop), 4240 (Hi-Crop), 4250 (s/n 1000- Hi-Crop), 4255 (Hi-Crop), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop), 4520, 4620, 5010, 5020 (025000>), 6030, 7020, Replaces John Deere OEM number R26609, For a new version of this item use Item #: 114090, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435641) $7.01

John Deere 4020 Front Pull Arm Washer
Front Pull Arm Washer
- For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, (Item #: 121442) $14.90

No
Picture
Front Pull Arm Washer, Used
- For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, For a new version of this item use Item #: 121442, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435774) $8.26

John Deere 4020 Hydraulic Cylinder Hanger, LH, Used
Hydraulic Cylinder Hanger, LH, Used
- For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 5020, Replaces John Deere OEM nos R32118, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498953) $20.01

John Deere 4020 Leveling Link Adjusting Shaft
Leveling Link Adjusting Shaft
- Used on John Deere 2010, 2510, 3010, 3020, 4010, 4020, 600, this part replaces John Deere part number T13859 (Item #: 111630) $44.60

John Deere 4020 Lift Arm Adjusting Handle
Lift Arm Adjusting Handle
- Used on John Deere 2010, 2510, 3010, 3020 (up to serial number 122999), 4010, 4020 (up to serial number 200999), 600. This part replaces T13858 (Item #: 110130) $20.30

John Deere 4020 Lift Arm Adjusting Handle, Used
Lift Arm Adjusting Handle, Used
- For John Deere tractor models 2010, 2510, 3010, 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number T13858, For a new version of this item use Item #: 110130, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410130) $10.01

John Deere 4020 Lift Link Knuckle
Lift Link Knuckle
- Used on John Deere Tractor 2010, 2510, 3010, 3020 (up to serial number 122999), 4010, 4020 (up to serial number 200999), 600. Replaces AR26691, Marked R26612 (Item #: 121856, Ref: AR26691) $59.00

John Deere 4020 Lift Link Rod
Lift Link Rod
- Rod is 25 5/8 inches in length. For 2510, 3010, 3020, 4010, 4020, 600. Verify length needed. (Item #: 110577, Ref: R26611) $92.00

No
Picture
Lift Link Rod
- For tractor models 3010, 3020, 4010, (4020 up To S#200999). (Item #: 110577, Ref: R3115) $92.00

No
Picture
Lift Link Rod
- For John Deere tractor models 2510, 3020, 4020, Replaces John Deere OEM number R34476, Length: 38 5/16", (Item #: 176688) $132.00

John Deere 4020 Lift Link Seal
Lift Link Seal
- For John Deere tractor models 2510, 3010, 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), Replaces John Deere OEM number AR26616, Inside Diameter; 1", Outside Diameter: 1.503", (Item #: 110138) $7.60

John Deere 4020 Lift Link, Adjustable
Lift Link, Adjustable
- Works on either RH or LH side. For tractor models 3010, 3020, 4010, (4020 SN# up to 200999). (Item #: 110250, Ref: AR44555) $448.00

John Deere 4020 Load Control Arm Support, Used
Load Control Arm Support, Used
- For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R51195, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431755) $25.01

John Deere 4020 Load Control Shaft
Load Control Shaft
- For John Deere tractor models 4000 (s/n 250000-earlier), 4010, 4020 (s/n 250000-earlier), Replaces John Deere OEM number R33826, 21.62" Long, 1.124" Diameter, (Item #: 111936) $97.00

John Deere 4020 Load Control Shaft Bushing
Load Control Shaft Bushing
- For John Deere tractor models 4000 (s/n 250000 - earlier), 4010, 4020 (s/n 250000 - earlier), 5010, 5020, Replaces John Deere OEM number R26505, 1.565" O.D., Includes o-ring A3606R, (Item #: 118282) $19.50

John Deere 4020 Load Control Shaft Bushing and O-Rings
Load Control Shaft Bushing and O-Rings
- For John Deere tractor models 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455, 6030 (s/n 33766-later), Replaces John Deere OEM number AR54481, Includes R53177 Back-up Ring and R53180 O-Ring, Sold individually, For Load control shaft use Item #: 112006, (Item #: 128537) $33.50

No
Picture
Load Control Shaft Bushing with O-Ring
- For John Deere tractor models 4000 (s/n 250001-later), 4020, 4040, 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM number R54785, OS: .020", (Item #: 176696) $27.50

John Deere 4020 Load Control Shaft Seal
Load Control Shaft Seal
- For John Deere tractor models 4000 (s/n 250000 - earlier), 4010, 4020, Replaces John Deere OEM number AR84792, Sold individually, (Item #: 118283) $8.42

John Deere 4020 Load Control Shaft, Used
Load Control Shaft, Used
- For John Deere tractor models 500, 600, 2510, 3010 (s/n 049999-earlier), 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), Compatible with John Deere Construction and industrial models 500A (s/n 123113-earlier), Replaces John Deere OEM nos R26630, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444803) $32.01

John Deere 4020 Lower Front Drawbar Pin Bushing
Lower Front Drawbar Pin Bushing
- The measurements on the bushing are 1.565 inches outside diameter, and 1.031 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121852, Ref: R40558) $8.90

John Deere 4020 Lower Lift Link Housing Yoke
Lower Lift Link Housing Yoke
- For John Deere tractor models 2510, 3010, 3020 (Early), 4010, 4020 (Early), Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R26615, (Item #: 110512) $140.00

John Deere 4020 Lower Lift Link Pin
Lower Lift Link Pin
- For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030 (s/n 6719-earlier), 4230 (s/n 13087-earlier), 4320, 4430 (s/n 17613-earlier), 4455, Replaces John Deere OEM number R54170, R26618, (Item #: 164340) $6.40

John Deere 4020 Pin, Front Pull Arm
Pin, Front Pull Arm
- For John Deere tractor models 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455 (Mexico), Compatible with John Deere Harvester (s) 740, 9940, 9950, Replaces John Deere OEM number R53558, (Item #: 170292) $20.10

John Deere 4020 Pull Arm End - Left Hand
Pull Arm End - Left Hand
- For John Deere tractor models 2840, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, Replaces John Deere OEM number RE44094, AR26554, Replaces John Deere Casting number R106781, R26907, Casting No. R26907, R106781, Left Hand, Category 2, (Item #: 112556) $154.00

John Deere 4020 Pull Arm End - Right Hand
Pull Arm End - Right Hand
- For John Deere tractor models 2840, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, Replaces John Deere OEM number AR26555, RE44093, Replaces John Deere Casting number R106780, R26911, Casting No. R26911, R106780, Right Hand, Category 2, (Item #: 112557) $142.00

John Deere 4020 Pull Arm Latch
Pull Arm Latch
- For tractor models 2510, 2520, 2840, 2940, 2950, 2955, 3020, (3030, 3130 SN# 166430 and up), 3040, 3055, 3120, 3140, 4000, 4020, 4040, (4040S, 4240S SN# less than 347554), 4230, 4240, 4250, 4255, 4430, 4455. Replaces AR30288, AR69317. (Item #: 108518, Ref: AR90082) $59.00

John Deere 4020 Rockshaft
Rockshaft
- For tractor models (2520 Row Crop), (3020 SN# 123000 and up), (4000, 4020 SN# 201000 and up Row crop and Standard), 4030, 4040, 4230, 4320, 4430. (Item #: 172658, Ref: R56175) $278.00

John Deere 4020 Rockshaft Arm Bushing
Rockshaft Arm Bushing
- For John Deere tractor models 2010 (s/n 29001-later), 2510, 3010, 3020, 4010, 4020, Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R26619, (Item #: 168631) $5.94

John Deere 4020 Rockshaft Control Cable
Rockshaft Control Cable
- For John Deere tractor models 4010, 4020 (s/n 200999-earlier), Replaces John Deere OEM number AR26712, R31422, Overall Length: 57", Mount to Mount:42 1/4", (Item #: 114692) $88.00

John Deere 4020 Rockshaft Cover Shield
Rockshaft Cover Shield
- For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Item #: 154194, Ref: R41663) $25.20

John Deere 4020 Rockshaft, Used
Rockshaft, Used
- For John Deere tractor models 600, 2420, 2520, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, 4030, 4230, 4320, 4430, Replaces John Deere OEM nos R34487, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433683) $176.01

John Deere 4020 Sway Block
Sway Block
- Left Hand For 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430 (Item #: 108936, Ref: R3139) $63.00

John Deere 4020 Sway Block, LH
Sway Block, LH
- This Left Hand Sway Block is used on tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4455. Replace R39513 (Item #: 108936, Ref: R39513) $63.00

John Deere 4020 Sway Block, RH
Sway Block, RH
- This Right Hand Sway Block is used on tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4455. It Replaces R39512 (Item #: 108937, Ref: R39512) $54.00

John Deere 4020 Telescoping Lift Pin
Telescoping Lift Pin
- Used on John Deere models with telescoping lower pull arms. This is part F2693R shown in the Illustration. B2477R, D2865R, F2208R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. This pinis 0.703 inches in diameter at the bottom, 7.190 inches over all length and 0.50 inches at the top. (Item #: 109685, Ref: F2693R) $12.70

John Deere 4020 Telescoping Lift Pin Snap Ring
Telescoping Lift Pin Snap Ring
- Used on John Deere models with telescoping lower pull arms. This is part F2208R shown in the Illustration. B2477R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170137, Ref: F2208R) $1.50

John Deere 4020 Telescoping Lift Pin Spring
Telescoping Lift Pin Spring
- Used on John Deere models with telescoping lower pull arms. This is part F2695R shown in the Illustration. F2208R, D2865R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109670, Ref: F2695R) $1.40

John Deere 4020 Telescoping Lift Pin Spring Washer
Telescoping Lift Pin Spring Washer
- Used on John Deere models with telescoping lower pull arms. This is part B2477R shown in the Illustration. F2208R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109671, Ref: B2477R) $2.90

John Deere 4020 Telescoping Lift Pin Washer
Telescoping Lift Pin Washer
- Used on John Deere models with telescoping lower pull arms. This is part T18716 shown in the Illustration. F2208R, D2865R, F2693R, F2695R and B2477R in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 173019, Ref: T18716) $0.80

John Deere 4020 Telescoping Lift Pin Washer
Telescoping Lift Pin Washer
- Used on John Deere models with telescoping lower pull arms. This is part D2865R shown in the Illustration. F2208R, F2695R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170141, Ref: D2865R) $0.70

John Deere 4020 Top Link (Center Link) End
Top Link (Center Link) End
- For John Deere tractor models 2510, 2520, 3020, 4000, 4020 (s/n 250000-later), 4030, 4230, Compatible with John Deere Construction and industrial models 500, 600, Replaces John Deere OEM number AR32531, Front (tractor side) center link end, Length: 9.750", Thread: 1.125" - 7 LH UNC, Pin Hole Diameter: .875", (Item #: 121858) $101.00

John Deere 4020 Top Link (Center Link) Pivot Pin
Top Link (Center Link) Pivot Pin
- For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4230, Compatible with John Deere Construction and industrial models 500, 500A, 600, Replaces John Deere OEM number AR67880, Length: 4.803", Diameter: .875", (Item #: 121859) $20.70

John Deere 4020 Top Link Ball, Category I
Top Link Ball, Category I
- This is a Category I Ball for a 2 inch socket and 3/4 inch pin. It is used with AR34208 top link. Replaces F2680R (Item #: 121860, Ref: F2680R) $6.70

John Deere 4020 Top Link Ball, Category II
Top Link Ball, Category II
- This is a Category II Ball for a 2 inch socket and 1 inch pin. It is used with AR34208 top link. Replaces F2681R (Item #: 111379, Ref: F2681R) $4.60

John Deere 4020 Top Link End
Top Link End
- Used on John Deere models: 500, 500A below serial number 123113, 600, 2510, 2520 Row Crop, 3010 below serial number 049999, 3020, 4000 serial number 201000 and up, 4010, 4020, 4030, 4230. 15.250 inches long with 1.250 inch Right Hand thread. Uses F2680R Cat I ball or F2681R Cat II ball, not included. Replaces AR46298, R26813. (Item #: 110204, Ref: AR46298) $101.00

John Deere 4020 Top Link End
Top Link End
- Measuring 8.500 inches long, with 1.375 inch -8 Left Hand UNC Thread and a 1 inch hole diameter, this part replaces John Deere part numbers AR50643. It is used on John Deere models: 2941, 2951, 3141, 3351, 3641, 3651, 4000, 4020, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4455. Verify measurements before ordering. Some of these models used more than one size. (Item #: 110318, Ref: AR50643) $117.00

No
Picture
Toplink Assembly
- For John Deere tractor models 3020 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4000 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4020 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4040 (s/n 002862-earlier), 4050 (s/n 001000-later), 4230 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4240 (s/n 006627-earlier), 4250 (s/n 006136-later), 4255, 4430, 4455, Replaces John Deere OEM number AR34209, AR50643, AR61659, R51524, R42495, Link Ends Have 1 3/8" Thread, Front Link End Has 1" Pin Hole, Additional Handling and Oversize Fees Apply To This Item, (Item #: 102056) $158.00

John Deere 4020 Toplink Transfer Hook
Toplink Transfer Hook
- S shaped hook. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4320, 4240, 4250, 4255, 4430, 4440, (4450 up to SN# 18905). (Item #: 114007, Ref: R53762) $5.90

John Deere 4020 Upper Front Drawbar Pin Bushing
Upper Front Drawbar Pin Bushing
- The measurements on the bushing are 1.565 inches outside diameter, and 1.283 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 114099, Ref: R40557) $5.50



John Deere 4020 Center Link Pin
Center Link Pin
- For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560) $1.80

John Deere 4020 Check Chain and Pin Kit
Check Chain and Pin Kit
- Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A) $8.90

John Deere 4020 Drawbar, Universal Cat I, 20-1\2 Inch
Drawbar, Universal Cat I, 20-1/2 Inch
- Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123) $57.00

John Deere 4020 Drawbar, Universal Cat I, 25-1\2 Inch
Drawbar, Universal Cat I, 25-1/2 Inch
- Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009) $39.30

John Deere 4020 Drawbar, Universal Cat I, 29-3\4 Inch
Drawbar, Universal Cat I, 29-3/4 Inch
- Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196) $48.70

John Deere 4020 Drawbar, Universal Cat I, 30-1\8 Inch
Drawbar, Universal Cat I, 30-1/8 Inch
- Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-1/8 inches center to center on lower link pins, (D) 2-1/16 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103174, Ref: S125) $41.00

John Deere 4020 Drawbar, Universal Cat II, 30-3\4 Inch
Drawbar, Universal Cat II, 30-3/4 Inch
- Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103176, Ref: S126) $57.00

John Deere 4020 Drawbar, Universal Cat II, 30-3\4 Inch
Drawbar, Universal Cat II, 30-3/4 Inch
- Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Item #: 103176, Ref: S60155) $57.00

John Deere 4020 Drawbar, Universal Cat II, 36-1\4 Inch
Drawbar, Universal Cat II, 36-1/4 Inch
- Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134) $131.00

John Deere 4020 Drawbar, Universal Cat II, 36-29\32 Inch
Drawbar, Universal Cat II, 36-29/32 Inch
- Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394) $94.00

John Deere 4020 Drawbar, Universal Cat II, 36-3\4 Inch
Drawbar, Universal Cat II, 36-3/4 Inch
- Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Item #: 103177, Ref: S60156) $64.00

John Deere 4020 Drawbar, Universal Cat II, 39-3\8 Inch
Drawbar, Universal Cat II, 39-3/8 Inch
- Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081) $99.00

John Deere 4020 Drawbar, Universal Cat III, 42-3\4 Inch
Drawbar, Universal Cat III, 42-3/4 Inch
- Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139) $283.00

John Deere 4020 Hair Pin Assortment
Hair Pin Assortment
- 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

John Deere 4020 Leveling Assembly
Leveling Assembly
- Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152) $31.40

John Deere 4020 Lift Arm Bushing
Lift Arm Bushing
- This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04) $2.60

John Deere 4020 Linch Pin, Pack of 2
Linch Pin, Pack of 2
- Package of 2 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. (Item #: 153791, Ref: DKP516) $1.40

John Deere 4020 Linch Pins, Pack of 2
Linch Pins, Pack of 2
- Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14) $1.20

John Deere 4020 Linch Pins, Pack of 2
Linch Pins, Pack of 2
- Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91) $1.30

John Deere 4020 Linch Pins, Pack of 2
Linch Pins, Pack of 2
- Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316) $1.10

John Deere 4020 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332) $44.90

John Deere 4020 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref: 159324) $41.10

John Deere 4020 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326) $61.00

John Deere 4020 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328) $61.00

John Deere 4020 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref: 159330) $65.00

John Deere 4020 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322) $61.00

John Deere 4020 Mower Deck Height Stabilizer Kit
Mower Deck Height Stabilizer Kit
- Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1) $40.00

John Deere 4020 Quick Hitch A-Frame Design
Quick Hitch A-Frame Design
- Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor’s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168) $335.41

John Deere 4020 Quick Hitch A-Frame Implement Adapter
Quick Hitch A-Frame Implement Adapter
- Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465) $98.30

John Deere 4020 Quick Hitch, Category I
Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. This part ships via truck freight. Please call for pricing and ordering. (Item #: 180731, Ref: HF141101) $328.58

John Deere 4020 Stabilizer Assembly
Stabilizer Assembly
- This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1) $22.00

John Deere 4020 Stabilizer Chain
Stabilizer Chain
- This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350) $27.00

John Deere 4020 Stabilizer Chains, Set
Stabilizer Chains, Set
- 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH) $63.00

John Deere 4020 Stabilizer Link
Stabilizer Link
- This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232) $30.60

John Deere 4020 Top Link
Top Link
- Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 184512, Ref: 30533E91) $27.00

John Deere 4020 Universal Drawbar Lock
Universal Drawbar Lock
- For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29) $25.70

John Deere 4020 Universal Drawbar Lock
Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories]   [All 4020 Parts]   [All John Deere Models]  







PayPal


Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2024 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy