FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 8210 Parts

Category: Steering

[Categories] [All 8210 Parts] [All Ford Models]

Axle Pivot Bushing - On Carraro 4WD front ends, this the outer most bushing on the pivot assembly. Measures 135mm outside diameter, 124mm inside diameter, 42 mm wide. This part replaces OEM part numbers CAR1234751, CAR123475, 83971641, 9968007, 83957129, 337255A1 (Item #: 156147, Ref: CAR1234751) $32.30

Axle Spacer - For tractor models 4000, 5000, 5900, 7000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, 4600, 5600, 6600, 6700, 7600, 7700, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8210. (Item #: 182791, Ref: C5NN3N030G) $5.10

Axle Support Bushing - Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575/1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1 (Item #: 156131, Ref: CAR1015751) $92.58

Ball Joint and Rod - This Ball Joint is 7.030 inches long and has M20 X 1.5 right hand thread in both sides. It replaces ZP0750125014. (Item #: 105181, Ref: ZP0750125014) $51.00

Cross and Bearing Kit - A= 1.18 inch, B= 1.18 inch, C= 3.62 inch, D= 3.62 inch. For tractor models 5110, 5610, 5610S, 6410, 6610, 6610S, 6810, 6810S, 7010, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210 all with MFWD. Replaces E7NN4635AA. (Item #: 156127, Ref: 83959516) $48.40

Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1) $42.10

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $42.10

Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 335 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA) $2.20

Final Drive Shaft - Used in Mechanical Four Wheel Drive front ends, this part replaces: E1NN3A328AB, L40029, 81453C1, 83927740, 83934903. It has 18 teeth on both ends. (Item #: 124721, Ref: L40029) $95.00

Front Axle - Differential Housing Bushing - The measurements on this bushing are: 4.525 inches outside diameter, 4.127 inches inside diameter, 1.730 inches long. This bushing is used on Carraro 4WD front end. Replaces OEM numbers 101565, K965266, CAR1015651, 83945601, CAR101565/1, CAR123478, 83930062, 9967993, R113766, 3541396M1, 040953R1 (Item #: 156132, Ref: CAR1015651) $79.00

Front Axle O-Ring - Many Carraro 4WD front axle equipped use this o-ring at the front of the pivot assembly. This part replaces OEM numbers 83957130, 83959520, CAR28556, N805193S91, 85807958, K965267, 28103 (Item #: 156146, Ref: CAR28556) $1.20

Front Axle Oil Seal - Used on some Carraro 4WD front ends, the seal replaces OEM numbers 153326217, 5122548, 5105932, CAR115715, 83944350, K262811, K395039, EQ501510 (Item #: 156134, Ref: CAR115715) $8.70

Front Axle Sleeve - Used on the pivot pin assembly on Carraro 4WD front axles, this bushing measures 115mm inside diameter, 125mm outside diameter, and 44mm wide. Replaces OEM numbers 09968010, 83957128, 83961191, 337253A1, 9968010, CAR123476, CAR124592 (Item #: 156145, Ref: CAR124592) $75.00

Front Axle Thrust Washer - Used in some Carraro Mechanical Four Wheel Drive front axles, this part replaces CAR115776, 47109296, CAR123478, 83944351, 9967994, K395022 (Item #: 156133, Ref: CAR115776) $23.90

Half Shaft Bushing - Used on ZF MFWD Axles this busing measures 1.462 inches inside diameter, 1.616 outside diameter, and 1.259 long. Replaces OEM numbers 81429C2, 81429C1, 83956842, L40017, L60747, ZP0730260617. Used on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210, 8210 (Item #: 124593, Ref: L60747) $13.30

Half Shaft Bushing - Measuring 1.457 inches inside diameter, 1.638 inches outside diameter and 1.024 inches wide, this is the inner bushing on ZF APL325 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81410C2, 83956843, L60748, L40018, ZP0730260616. This front axle can be found on the following Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124592, Ref: L60748) $15.20

Half Shaft Bushing - Many Carraro Mechanical Four Wheel Drive front axles use this inner half shaft bearing. This part replaces OEM numbers 09968000, 9968000, 87313791, 83952334, CAR118547, K395019 (Item #: 156140, Ref: CAR118547) $11.02

Half Shaft Bushing - Many Carraro Mechanical Four Wheel Drive front axles use this inner half shaft bearing. This part replaces OEM numbers 381410A1, 47110070, 6914496, 6190247M1, CAR116962, D142950, 85807965, 82848085, 195207A1, 1-33-741-643, D142950, 3541401M1 (Item #: 156141, Ref: CAR116962) $5.60

Half Shaft Bushing - This bushing is closest to the wheel on the Carraro front axle shaft. Replaces OEM numbers 09968019, 109972, 5194292, CAR109972, 83930156, 9968019, 1967535C1, 05194292 (Item #: 156143, Ref: CAR109972) $9.60

Half Shaft Inner Seal - The measurements on this seal are: 62mm outside diameter, 42mm inside diameter, 14mm wide. This seal is used on the inner portion of a half shaft on Carraro front axles. Replaces OEM numbers 9968001, 73403999, CAR116723, 83952335, 1966164C1, 09968001, 3475332M1, KH1213, VKH1213 (Item #: 129289, Ref: CAR116723) $14.50

Hub Inner Seal - The measurements on this seal are 1.575 inches inside diameter, 2.169 inches outside diameter, and 0.315 inches thick. It is used in the hub of Carraro 4WD front axles. This part replaces 6190246M1, 118675, 1967605C1, CAR118675, 82848086, 3946626, 83946626, 83937304, 85807964, 83930043, 96839, 47110069, N8897, K260142, K205152, K965236, 1-33-741-636, 3541488M1, 3426192M1, 3019957X1 (Item #: 104714, Ref: CAR118675) $9.60

Hub Seal - Used on ZF Mechanical For Wheel Drive hubs, this seal measures 5.374 inches inside diameter, 6.516 inches outside diameter and 0.507 inches wide. Replaces AL68616, ZP0750110156, 1964236C1, 81867542, 83946555, ZP0750110156, E2NN1N049CA, ZP0734317057, ZP4472353256 (Item #: 104717, Ref: AL68616) $48.50

Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147) $62.00

Hub Seal, MFWD - Extensively used on Carraro mechanical four wheel drive front axles, this hub seal measures 149mm (5.86614 inches) x 176mm (5.86614 inches) x 16mm (0.629921 inches). Replaces OEM numbers 9968085, K395102, 47108806, 83996064, 82920209, 294169A1, 247877A1, 130182A1, 1349265C1, CAR126324, CAR47705, 3225110, 0003225110, 82920209, 3996064, 83996064, 83957862, 9968085, 153326219, 153326621, 1349265C1, 153326301, 09968085, 83952509, 83952530, CAR118556, CAR126324, CAR47705, CAR126390, 3501510M1, 3475598M1, 3475533M1, 3523062M1, 3541510M1 (Item #: 157753, Ref: 247877A1) $58.00

Hub Seal, Outer - Used on many MFWD (mechanical four wheel drive) front ends, this seal has an Inside Diameter of 1.814 inches, Outside Diameter of 2.568 inches, and Width of 0.671 inches. It replaces OEM numbers 1429645, 81288C1, 81288C3, 83959483, ZP0750110134, AL61448, AL39338, 31372000, V31372000 (Item #: 104716, Ref: ZP0750110134) $16.80

Joint Assembly, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this part replaces OEM part numbers 1968450C1, 81430C1, 83961165, AL63606, AL38018, AL64250, ZP7029910201. This axle was used on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 156193, Ref: AL63606) $627.00

King Pin Thrust Bearing - Used on several Carraro 4WD front ends, this 2 piece bearing set replaces OEM numbers N14373, 47109506, 3523057M1, 47895578, 123726, 137700410834, 153326668, 1964243C1, 14373, 83982416, 83944349, 87523063, K395040, 87521218, 47123701, 9968002, CAR123726, CAR115714, 3541402M1, 3475530M1, 3523057M1, EQ501557, ER123726 (Item #: 156136, Ref: CAR123726) $25.00

MFWD Shaft Bushing - The dimensions of this bushing are 1.815 inside diameter x 1.971 outside diameter x 0.985 long. It is used in many MFWD (Mechanical Four Wheel Drive) front ends. Replaces OEM part numbers 9579217, 87791108, ZP0750101010, ZP0730260618, 83956845, 81287C2, 84996796, 81287C1, 83945712, 81287C1, 81287C2, L60147 (Item #: 158091, Ref: ZP0730260618) $34.70

MFWD Universal Joint - Used on APL axles 335, 325, 350, 345, 1351, 1551, this universal joint measures 34mm (1.339 inches) x 97mm (3.819 inches). Replaces OEM numbers ZP1927603, ZP1927831, 83934998, 81927603, 81927831, 81927603, ZP0501205340, 83956477, E3NN4635AA (Item #: 173025, Ref: E3NN4635AA) $143.28

$Ford 8210 O-Ring \ Seal$
O-Ring / Seal - Made of Nitrile Rubber, this o-ring measures 7.874 inches inside diameter with a 0.118 inch thickness. It is used in many mechanical four wheel drive systems. Replaces OEM numbers 81313C1, 81326C1, 1-31-742-032, 71452157, E1NN1N050AA, 83927797, L40317, AL40317 (Item #: 156198, Ref: E1NN1N050AA) $6.70

Outer Bushing, MFWD - Used on ZF Axles APL345, APL350, APL1351, APL1551, this bushing measures 1.813 inches inside diameter, 1.973 inches outside diameter and 1.182 inches wide. The bushing replaces OEM numbers 83956846, 87791108, L60088, 81306C1, ZP0730260619. Used on Ford / New Holland models: TW5, TW15, TW25, 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, 7910, 8210 (Item #: 156192, Ref: L60088) $47.50

Pinion Shaft - For tractor models 6710, 7610, 7710, 7910, 8210, TW15, TW25, TW5 with mechanical four wheel drive. Replaces L40267, 83945674, ZP4472353158, 81683C1. Used on APL345 or APL350 front axles. 18 and 22 teeth. (Item #: 114884, Ref: L41123) $78.00

Pivot Pin Seal, MFWD - For ZF APL325 or APL350 Mechanical Four Wheel Drive front axles, this o-ring has a 1.346 inch inside diameter and is 0.118 inches thick. Replaces OEM numbers 81419C1, 83927817, E1NN3125AA, L53819. These axles can be found on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124690, Ref: L53819) $2.40

Planetary Carrier Housing - Used on ZF APL-325 Axles on Ford 5610, 6610, 6710, 7610, 7710, 7910, 8210. This part replaces 81454C1, 135700420748, 83927791, E1NN1N045AA, L40041 (Item #: 127236, Ref: VPR6067) $1199.01

Planetary Gear - Used on Ford models 5610, 6610, 6710, 7610, 7710, 7910, 8210 with Mechanical 4 Wheel Drive. Three are used per housing. Sold individually. This part replaces 81455C1, E1NN4044AB, L40028 (Item #: 124631, Ref: VPJ7852) $116.08

Planetary Gear - Used on Ford models 6710, 7610, 7710, 7910, 8210, TW15, TW25, TW5 all with Mechanical Four Wheel Drive. This Gear has 34 teeth. Replaces 81688C1, 83985466, L39994, L41120, ZP4472353463 (Item #: 114883, Ref: L39994) $111.00

Planetary Ring Gear - Used on ZF Axle Mechanical Four Wheel Drive. This planetary ring gear is 8.14 inches outside diameter and has 90 teeth. Used on Ford / New Holland models: 6710, 7710, 7910, 8210, TW15, TW25, TW5. Replaces part numbers ZP4472353076, L40010, 83934014, E2NN1N043EA, VPJ7844 (Item #: 164180, Ref: L40010) $279.00

Planetary Ring Gear - For Mechanical Four Wheel Drive, this planetary ring gear has 114 spines and an outside diameter of 8.16 inches. This part replaces OEM numbers 81452C1, 83927789, L40043 (Item #: 124630, Ref: L40043) $367.00

Power Steering - Pump with Reservoir, OEM Number: E6NN3K514TA. For tractor models 6700, 6710, 7700, 7710, 7810, 7910, 8210. (Item #: 157655, Ref: R4107) $500.00

Power Steering Cylinder Seal Kit - This Power Steering Cylinder Seal Kit is used with D5NN3N797A Shaft on 5700, 6700, 6710, 7700, 7710, 7910, 8210. (Item #: 179352, Ref: DGPN3301B) $39.00

Power Steering Cylinder Shaft - This Power Steering Cylinder Piston and Rod and a 2.234 Outside Diameter. It is used on 5700, 6700, 7700, 7710, 7910, 8210, 8700, 9700, TW10, TW20, TW30. Use with DGPN3301B Seal Kit. Replaces original part number D5NN3N797A, D5NN3N699A (Item #: 179350, Ref: D5NN3N797A) $168.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. For tractor models (2000, 3000, 4000, 5000 1965-9/1968), (8000, 8600, 9000, 9600 1/1968-2/1973), (Industrials 3400, 3500, 4400, 4500 1965-4/1970). NOTE: This kit is for pumps that used 2 - single lip seals. If your pump uses one double lip seal, use kit 83910651. (Item #: 113930, Ref: DHPN3A674B) $12.40

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $13.20

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.60

Roller Bearing - Used in many Four Wheel Drive Systems, this bearing measures 109.5mm (4.311 inches) inside diameter, 158.8mm (6.25 inches) outside diameter and 21.2mm (o.834 inches) wide. Replaces OEM numbers ZP0735370150, 81676C1, 84592016, 47724311, 5133737, 83952531, K395101, H1482196, CAR118370, 9967690, CAR045180, CAR142088, K395101, ZP0735370150, 83952531, 47724311, 5133737, 84592016, 6914441, 9967690, 83985020, 89967690, CAR118370, 81676C1, 05133737, 47724311, H1482196, K395101, 81676C1 (Item #: 156047, Ref: JD10249) $79.00

Roller Bearing with Cup MFWD - Used on ZF APL315, APL325, and APL330 Mechanical Four Wheel Drive Axles, the pivot bearing replaces OEM part numbers 1342525C2, 1342525C1, 81416C1, 81417C1, 83958377, AL63617, ZP0750117306, LM72848 and LM72810. These axles can be found on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124691, Ref: AL63617) $45.90

Spindle Bushing - This is a Lower Spindle Bushing used in multiple Ford Tractors. Measures 1.94 inches ID, 2.06 inches OD, and 1.75 inches long. Replace original part numbers C0NN3110A and 81812242. (Item #: 100243, Ref: C0NN3110A) $9.80

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.40

Spindle, LH - This left spindle for tractor models 5700, 6700, 6710, 7700, 7710, 7910, 8210. The Vertical Shaft measures 12.875 inches long, has a diameter of 1.722 inches and tapers to 1.934 inches at the base. The wheel bearing kit used for this spindle is part number FW96WS. (Item #: 104541, Ref: D5NN3106F) $402.22

Spindle, RH - This spindle is for tractor models 5700, 6700, 6710, 7700, 7710, 7910, 8210. Vertical Shaft is 12.875 long, diameter at center is 1.722 and 1.934 at base. The wheel bearing kit used for this spindle is part number FW96WS. (Item #: 104540, Ref: D5NN3105F) $284.00

Steering Arm - This Steering Arm is used on Ford/New Holland Models: 5700, 6700, 7700, 6710, 7710, 7810, 7910, 8210, 8700, 9700, TW10, TW20, TW30 Replaces original part number D5NN3131B (Item #: 104744, Ref: D5NN3131B) $242.00

Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $40.00

Steering Motor - For Ford tractor models TW5, TW10, TW20, TW30, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 9000, 9700, Replaces Ford OEM number 81875266, E3NN3A244CB, Fits 6 cylinder engines, Steering control unit with "Roll Pin" type shaft, 146 cc, (Item #: 155280) $1059.01

Steering Motor - For Ford tractor models 7810, 7910, 8210, 8530, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 455C (12/88-8/31/92), 455D (12/88-8/31/92), 555C (11/88-1/92), 555D (11/88-1/92), 575D (11/88-1/92), 655C (11/88-1/92), 655D (11/88-1/92), 675D (11/88-1/92) Replaces Ford OEM number F1NN3A244AB, 868585452, , Compatible with International tractor models 986, Replaces International OEM number 928751C96, Ports are labeled as: P-Pressure, T-Return, A-RH, B-LH, (Item #: 160074) $1029.01

Steering Motor Seal Kit - This Steering Motor Seal Kit has a 1.776 inch seal. It is used on Ford / New Holland models 5110, 5610, 5900, 6410, 6610, 7610, 7710, 7810, 8210, 8530, 8630, 8730, 8830, TW5, TW15, TW25, TW35, 445C, 445D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655C, 655D, 675D. Replaces 83945793, F1NN3N991AA, E3NN3R513BA, E3NN3N991BA, 81871236, 86585241 (Item #: 178956, Ref: F1NN3N991AA) $183.00

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.20

Taper Roller Bearing - Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349/819310, 819349 (Item #: 156177, Ref: ZP0750117062) $86.82

Thrust Washer - Used on the pivot pin assembly on some Carraro 4WD axles, this thrust washer replaces OEM numbers 1-33-741-646, 83957128, 09968006, 83961192, 9968006, CAR124591, CAR123476 (Item #: 156144, Ref: CAR123476) $35.30

Tie Rod - Tie Rod is 1.187 diameter rod, left hand, straight, drilled, 8 holes, 31 inches to center of post. For 4600, 532, 5610, 5700, 6610, 6700, 6710, 7410, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 3600. Replaces 83906922, 83929292, E1NN3280AA (Item #: 100688, Ref: E1NN3280AA) $52.45

Tie Rod - Right Hand - For Ford tractor model 8210, Replaces Ford OEM number CAR48981, CAR49014, Length: 6.75", M24 x 1.5 RH Thread, (Item #: 160193) $104.00

Tie Rod Assembly - Used on MFWD ZF Axle APL 345, this part fits the right hand side. This axle was used on Ford TW5, TW15, TW25, 7910, 8210. Replaces OEm numbers 83953210, E2NN3A302BA, ZP0750137057 (Item #: 104679) $306.00

Tie Rod Assembly - Left Hand - For Ford tractor models TW5, TW15, TW25, 6710, 7610, 7710, 7910, 8210 (All 03/1984 - later), Replaces Ford OEM number 83945661, ZP0501205350, Fits Left Hand Side, (Item #: 104657) $255.14

Tie Rod Assembly - Right Hand - For Ford tractor models TW5, TW15, TW25, 6710, 7610, 7710, 7910, 8210, Replaces Ford OEM number ZP0501205349, 83945660, Fits Right Hand Side, (Item #: 104658) $341.35

Tie Rod Center - Measuring 8.20 inches overall, with M22 X 1.5 Right Hand thread on one side and M24 x 1.5 Right Hand thread on the other. For the following FORD models: 5640, 6640, 7630, 7740, 7840, 7910, 8030, 8210, 8240, 8340, LM500, TW15, TW25, TW5. Replaces ZP0750125010, ZP0501205010, ZP0501205167, 9968015, CAR49013, 83962754, 9968018, 83957096, 83957792, 48038758, 1429647. (Item #: 128527, Ref: AL80542) $74.00

Tie Rod End, Economy - Left Hand - For Ford tractor model 8210, Replaces Ford OEM number 87761564, CAR48980, CAR49012, Replaces Carraro manufacturer number 49012, 48980, Fits Left Hand Side, Length 6.750", M24 x 1.5 Left Hand Thread, For Carraro Version use Item #: 156171, (Item #: 104664) $127.68

Tie Rod, Left Hand - This is a Left Hand Tie Rod for ZF Mechanical Four Wheel Drive axles. It is 12.625 inches long. It has M18 X 1.5 RH Thread Used on 6710, 7610, 7710, 7910, 8210, TW5, TW15, TW25 (Item #: 104675, Ref: ZP0501205463) $82.20

Tie Rod, Right Hand - This is a Right Hand Tie Rod for ZF Mechanical Four Wheel Drive Axles. It is 12.625 inches long. It has M18 X 1.5 right hand thread. Used on 6710, 7610, 7710, 7910, 8210, TW5, TW15, TW25 Replaces 83959471, ZP0501205464. (Item #: 104677, Ref: ZP0501205464) $106.37

Universal Joint - Measuring 27mm 1 1/16 inches) x 70mm (2 3/4 inches) this universal joint is used on the axle of APL 335, 325, 345, 350, and 300. Replaces OEM numbers ZP7029457207, 83964587, 84355357, ZP7029457210, 1342711C1, 81873051, 144465A1, 1342715C1, 83956476, ZP0501205345, 9968059, 247543A1, AL64126 (Item #: 124613, Ref: 1342711C1) $106.00

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Wheel Half Shaft Seal, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this seal measures 1.388 inches inside diameter, 2.055 inches outside diameter and is 0.588 inches wide. Replaces OEM numbers 81411C2, 83956841, 83961163, AL63351, AL68702, ZP07050110133. Ford / New Holland models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124717, Ref: AL63351) $24.20

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL325 Mechanical Four Wheel Drive front ends. This part replaces L40036, ZP4472351239, 81428C1, 83946561, E1NN3B626AA. Verify your axle before ordering. Some of the models listed used more than one 4 wheel drive front end. Used on Ford / New Holland 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124687, Ref: E1NN3B626AA) $80.00

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL345, APL350, APL1351, APL1551 Mechanical Four Wheel Drive front ends. This part replaces E2NN3B626CA, 87759380, 87772879, L40004, 81670C1, ZP4472353195, ZP4472353682. Some of the models listed used more than one 4 wheel drive front end. Used on Ford / New Holland TW5, TW15, TW25, 6710, 7610, 7710, 7910, 8210 (Item #: 156197, Ref: L40004) $93.00

Universal Parts and Accessories
Category: Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $127.00

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 8210 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy