FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 6600 Parts

Category: Steering

[Categories] [All 6600 Parts] [All Ford Models]

Axle Carrier Housing, LH - Used on ZF Axle APL1351. This left side hub carrier replaces OEM numbers L35603, P4468358031, 3230954R1, 83953218. Verify axle number before ordering. Used on Ford models: 5600, 5700, 6600, 6700 (Item #: 124660, Ref: L35603) $382.00

Axle Carrier Housing, RH - Used on ZF Axle APL1351. This right side hub carrier replaces OEM numbers L35604, ZP4468358032, 3230955R1, 83953219, ZP1927585. Verify axle number before ordering. Used on Ford models: 5600, 5700, 6600, 6700 (Item #: 124661, Ref: L35604) $181.98

Axle Knee, Left Hand - This is a Left Hand Axle Knee used on Ford 5000, 7000, 5600, 6600, 7600, 5610, 6610, 7610. It replaces original part number C5NN3007A (Item #: 169481, Ref: C5NN3007A) $273.00

Axle Knee, Right Hand - This is a Right Hand Axle Knee used on Ford 5000, 7000, 5600, 6600, 7600, 5610, 6610, 7610. It replaces original part number C5NN3006A (Item #: 192769, Ref: C5NN3006A) $345.65

Axle Pin Locking Plate - This locking plate is used with 312659 Pin. Replaces C5NN3128B. (Item #: 153968, Ref: C5NN3128B) $11.70

Axle Pin, Front - This Heavy Duty Front Axle Pin is threaded. 1.750 inch outside diameter, 4.71 inch long, 4.00 inch usable length. For the following models built after 7/1958: 601, 701, 801, 901, 2000, 2100, 2600, 2610, 2810, 2910, 3100, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 5100, 5600, 5610, 6600, 6610, 7100, 7600, 7610. Uses C5NN3128B Flange. (Item #: 172932, Ref: 312659) $101.00

Axle Pivot Pin Bushing - For Ford tractor models TW10, TW20, TW30, 3500, 4400, 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740, 8000, 8240, 8340, 8600, 8700, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 3550, Replaces Ford OEM number C5NN3446A, 81802940, 81941357, 1.50" O.D., 1.247" I.D., 1.375" Long, Rear Bushing, (Item #: 111730) $3.60

Axle Pivot Pin, Front - For Ford tractor models 3600 (1/75-12/81), 4100 (1/75-12/81), 4600 (1/75-12/81), 5200 ('67-later), 6600 ('75-9/76), 7000 ('67-later), 7200 ('67-later), 7600 ('75-9/76), Replaces New Holland OEM number C5NN3N159C, Front Axle Pivot Pin, (Item #: 170380) $92.00

Axle Shaft - Used in ZF Mechanical Four Wheel Drive axles, this part replaces AL33349, ZP1927860, 1502272C1, 3232082R91, 81927860. (Item #: 124723, Ref: AL33349) $240.62

Axle Shaft and Yoke, MFWD - Used on ZF APL1351 Mechanical Four Wheel Drive front end, this shaft is 9.39 inches long with 21 teeth. Replaces OEM numbers 3216599R91, 81927571, AL32883, ZP1927571. Ford models: 5600, 5700, 6600, 6700 (Item #: 115716, Ref: AL32883) $141.00

Axle Shaft with Yoke - Used on ZF APL351 Mechanical Four Wheel Drive front ends, this shaft and yoke is 35.50 inches from center of the u-joint to the end. It has 21 teeth. This part replaces OEM numbers ZP1927573, 3230278R1, AL32884. Ford models: 5600, 5700, 6600, 6700 (Item #: 160162, Ref: AL32884) $338.00

Axle Spacer - For tractor models 4000, 5000, 5900, 7000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, 4600, 5600, 6600, 6700, 7600, 7700, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8210. (Item #: 182791, Ref: C5NN3N030G) $5.40

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $15.98

Ball Bearing, Steering Gear - Used with E1ADKN3556 Ball Race. 14 used for main nut, 10 used in upper shaft bearing, 10 used in lower shaft bearing. For tractor models Major, Super Major, 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600. Replaces 353075S. (Item #: 167684, Ref: 83424343) $0.50

Bushing - Bushing Assembly, Upper. For tractor models 2600, 3600, 4100, 4600 (4/1976-1981); 5600, 6600, 7600 with manual steering (4/1976-1981);2610, 3610, 4110, 4610, 5610, 6610, 7610 with power steering (1981-3/1985).D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.20

Bushing - Bushing, 1.375 long. For Power Steering Center Arm Pivot Shaft, Upper Bushing. For tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 153967, Ref: C5NN3179B) $4.10

Center Arm - Center Arm, for Power Steering Pivot Shaft. For tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 100667, Ref: D6NN3N670A) $84.00

Drag Link - Drag Link for power steering, 50.50 inch center post to center post. For 5000, 5600, 6600, 7000, 7600. Replaces C7NN3304B, E0NN3308CA, 81822052, 83925158. (Item #: 100689, Ref: E0NN3304CA) $61.00

Drag Link End - Front - For Ford tractor models 5000, 5100, 5600, 5610, 6410, 6600, 6610 (81 with manual steering), 7000 (68 - 75), 7100 (with manual steering), 7600 (75 - 81 with manual steering), Replaces Ford OEM number C7NN3A300A, 81825395, 877554825, C5NN3A300D, Front Drag Link End, Length 7.875", Diameter .935", (Item #: 104617) $31.00

Drag Link End - Rear - For Ford tractor models 3430, 3930, 4610, 4630, 4830, 5030, 5600, 6600, 7600 (All with Power Steering), Replaces Ford OEM number E1NN3307AA, 83932651, Diameter 1.125", Length 41.190" from center of ball stud to end of tube, (Item #: 104588) $70.00

Drag Link End - Rear - For Ford tractor models 5000 (65-75 replacement thread style link used 65-12/67), 5100 (with manual steering), 5600 (71-81 with manual steering), 5610 (81 with manual steering), 6410 (with manual steering), 6600 (71-81 with manual steering), 6610 (81 with manual steering), 7000 (65-75 replacement thread style link used 65-12/67), 7100 (with manual steering), 7600 (71-81 with manual steering), Replaces Ford OEM number C7NN3304C, C5NN3304T, Length 47.500" long from center of ball joint to end, (Item #: 104615) $133.00

Drop Arm - For Ford tractor models 5000, 5600, 5610, 5900, 6600, 6610, 7000, 7600, 7610, Replaces Ford OEM number C7NN3590B, 81822063, (Item #: 154911) $81.00

Drop Arm, Used - For Ford tractor models 5000, 5600, 5610, 5900, 6600, 6610, 7000, 7600, 7610, Replaces Ford OEM number C7NN3590B, 81822063, For a new version of this item use Item #: 154911, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454911) $80.01

Front Axle Bushing - This Front Axle Pin Bushing is used on 5000, 5100, 7000, 7100, 5600, 6600, 7600, 5610, 6610, 7610, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 3500, 4400. It has a 2.132 inch outside diameter, a 1.893 inch inside diameter and is 2 inches long. It replaces original part number C5NN3153A (Item #: 111728, Ref: C5NN3153A) $5.90

Front Axle Pin, Front - Front Axle Pin, Manual or Power Steering. For tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 162989, Ref: C5NN3N159A) $34.90

Front Axle Pin, Rear - 1.250 inch outside diameter, 5.150 inches long, Manual or Power Steering. For tractor models 3550, 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces C5NN3N160A, 81802839, 81802839GV, E6NN3N160AA (Item #: 128484, Ref: C5NN3N160A) $28.80

Front Axle Support - For models: (5000 from 9/1970 and up), 7000, 5600, 5900, 6600, 7600, 5610, 6610, 7610. Steering Shaft Bushings (C5NN3179B and C5NN3179A) not included. Replaces Part Numbers E5NN3029BA D0NN3029A. (Item #: 153934, Ref: E5NN3029BA) $960.00

No
Picture
Hydraulic Lift Cylinder Piston Ring - For Ford tractor models 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700, Replaces Ford OEM number D1NN473B, Piston Diameter: 3.75", (Item #: 176453) $5.10

MFWD Universal Joint - Used on APL axles 335, 325, 350, 345, 1351, 1551, this universal joint measures 34mm (1.339 inches) x 97mm (3.819 inches). Replaces OEM numbers ZP1927603, ZP1927831, 83934998, 81927603, 81927831, 81927603, ZP0501205340, 83956477, E3NN4635AA (Item #: 173025, Ref: E3NN4635AA) $143.28

Pitman Arm - This Steering Pitman Arm is used on manual and power steering gear boxes with a single drop arm. It has 36 splines and replaces original part numbers C5NN3590A and 81803153. For tractor models 2310, 2610, 2910, 3430, 3610, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 535, 5100, 5110, 5600, 5610, 6600, 6610 and 7600. (Item #: 104740, Ref: C5NN3590A) $189.54

Power Steering Control Valve Housing - This Power Steering Control Valve Housing is used on Ford Models: 5000, 7000, 5600, 6600, 7600. It replaces original part number C9NN3C516B (Item #: 180253, Ref: C9NN3C516B) $133.51

No
Picture
Power Steering Conversion Kit - Ford - For Ford tractor models 5000, 5610, 6600, 6610, Includes: Oil Reservoir, Hydraulic Steering Pump, Cylinder Bracket, Steering Cylinder, Drag Link, 5/8" Hose Clamp, 5/16" Pressure Hose, 3/8" Return Hose, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108167) $535.00

Power Steering Cylinder End - Power Steering End right hand (inner), .875 inch-14 thread female, 3.625 inches long to center of post. Tractors: 3010S, 4010S, 5100, 5110, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6710, 6810, 6810S, 7010, 7100, 7600, 7610, 7610S, 7810, 7810S, 8010. Verify Part number to ensure proper fit. (Item #: 100683, Ref: E3NN3B539AA) $32.80

Power Steering Hose Assembly - Flexible Power Steering Hose designed to replace rigid Ford tube assemblies. 54 inches long, 3/8 inch inside diameter. SAE 100 R1A single wire braid hose with 5/8 inch-18 thread, straight SAE flare female swivel on one end, 5/8 inch-18 thread SAE straight inverted flare on other. For tractor models 2000, 2600, 3000, 3500, 3600, 4000, 4600, 5000, 5600, 6600, 7000, 7600. Can replace tube assemblies C5NN3A562C, C7NN3A562C, C5NN3A541A, C7NN3A541A, C7NN3A541B, D0NN3A562A. (Item #: 178207, Ref: FPH54) $60.00

No
Picture
Power Steering Hydraulic Pump - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number D7NN3A674B, E6NN3K514DA, 83959532, Front inlet hole size: 9/16" UNF, Front outlet hole size: 5/8" UNF, Inner maximum liters per minute: 12.5, Inner maximum gallon per minute: 2.75, Top hole spacing: 107, (Item #: 170931) $522.48

Power Steering O-Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530, 530A, 531, 532, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655C, 655D, 675, 675D, 750, 755, 755A, 755B, Replaces Ford OEM number D2NN3D587A, D7NN3D587A, (Item #: 154787) $2.20

Power Steering Pump - This power steering pump used with flair fitting on models using Steering Gear Box, pump has Relief Valve. For tractor models 2310, 234, 2610, 2810, 2910, 3230, 334, 335, 3430, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 5100, 5600, 5610, 5900, 6600, 6610, 6710, 7100, 7600, 7610, 7710. Rated Pressure 725-1305 at 500-2000rpm. Safety valve Opening Pressure 942-1087 PSI, Safety Valve Full Open: 1087-1305 PSI. Unit designed for o-ring fitting, not supplied w/pump. This pump fits tractors with JIC fittings. Replaces 82858430, E6NN3K514PA99M (Item #: 113208, Ref: E6NN3K514PA99M) $285.00

Power Steering Pump - This Power Steering Pump replaces pumps with an internal Relief Valve (will not replace external relief valve. For 3500, 3550 5/1970 and up, 5100, 7100 7/1970 and up, 4100 4/1970 and up, 4600, 5600, 6600, 7600 5/1981 and up, 5610, 6610, 7610 4/1985 and up. Power Steering Pump with reservoir. Pressure relief valves set at 1100 PSI, 2.74 GPM. This pump can replace: 83949432, E6NN3K514DA. 2000, 3000 10/1968 and up, 2600, 3600, 4100, 2610, 3610, 4110 less cab, 83959550 - E6NN3K514CA. 4000 (10/1968-3/1970), 2600, 3600, 4110 with cab. Fits others replacing the following OEM numbers: D8NN3K514GA, D8NN3K514GB, D8NN3K514GC, E6NN3K514EA, 83917191, 83923736, 83924995, 83959533, 87759440, A709527 (Item #: 113209, Ref: E6NN3K514EA) $182.80

Power Steering Pump - E6NN3K514CA - For Ford tractor models 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2600 (1/75-12/81), 2600 (R (1/75-12/81), 2600 (N (1/75-12/81), 2600 (V (10/75-9/76), 3000 (1/65-12/74), 3100 (1/65-12/74), 3600 (R (1/75-12/77), 3600 (1/75-12/81), 3600 (N (1/75-12/81), 3600 (NO, V (1/75-12/81), 3900 (1/75-12/81), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4600 (1/75-12/81), 4600 (O (1/75-12/81), 4600 (NO (10/75-12/81), 4600SU (1/75-7/78), 5000 (1/65-1/75), 5100 (1/65-12/74), 5200 (1/67-12/74), 5600, 5700, 6600, 6600 (O), 6600, 6700, 7000, 7100, 7200, 7600, 7600, 7700, For Ford Construction and industrial models 231, 233, 333, 335, 420, 515, 531, 532, Replaces Ford OEM number E6NN3K514CA, 83959550, 850 PSI at 1000 RPM, 2.74 GPM, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157811) $307.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. For tractor models (2000, 3000, 4000, 5000 1965-9/1968), (8000, 8600, 9000, 9600 1/1968-2/1973), (Industrials 3400, 3500, 4400, 4500 1965-4/1970). NOTE: This kit is for pumps that used 2 - single lip seals. If your pump uses one double lip seal, use kit 83910651. (Item #: 113930, Ref: DHPN3A674B) $11.20

Power Steering Pump Repair Kit - This Seal and O-Ring Kit is for Power Steering Pumps with External Reservoirs. Fits; (2000, 3000, 4000 and 5000 1/1965-9/1968), (7000, 8000, 8600, 9000, 9600 1/1968-2/1973), Industrial; (3400, 3500, 4400, 4500 1/1965-4/1970), (2110LCG, 4110LCG 1965-9/1968). Contains: (2) D2NN3R542A O-Ring, (2) D2NN3R543A O-Ring, (2) E0NN3N529AA Seal, (1) E1ADKN994567 Seal, (2) 9861410 O-Ring, (1) 134373 O-Ring, (1) 9991976 O-Ring, (1) 379275S94 O-Ring, (1) 9617873 O-Ring. Replaces OEM part number DHPN3A674A. (Item #: 168490, Ref: DHPN3A674A) $56.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $12.60

No
Picture
Power Steering Pump, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number E6NN3K514DA, 83959532, Replaces Ford Casting nos C7NN3K514A, For a new version of this item use Item #: 170931, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 457518) $291.01

Power Steering Seal Kit - Orbital Control Valve and Gear Box Gasket and Seal Kit. For tractor models (4000, 5000 from 7/1970 and up), 4600, 5600. 5610, 6600, 6610, 7000, 7600, 7610. NOTE If you are working on a 5600, 6600, 7600, 5610, 6610 or 7610 you will also need three E0NN3A590AA Teflon seals, sold seperately. Replaces EGPN3N503AA, C9NN3R668A, E1NN3N632AA, C9NN3N598A, C9NN3R669A, C9NN3C615A, 81803034. (Item #: 164631, Ref: EDPN3500A) $15.50

Power Steering Seal Kit - This Power Steering Seal Kit is used on steering gear assemblies. It contains (1) C9NN3747A, (1) C9NN3E614A, (2) C9NN3A590A, (2) C9NN3D624B, (1) E1NN3N632AA. Replaces EGPN3N503AA, 83957121 (Item #: 168433, Ref: EGPN3N503AA) $8.70

Power Steering Valve Seal - Teflon Seals for Steering Valve. This Seal is used with EDPN3500A Power Steering Seal Kit when used on 5600, 6600, 7600, 5610, 6610, 7610. Order 3. Price is for one. (Item #: 185754, Ref: E0NN3A590AA) $7.40

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.60

Roller Bearing - Used in many Four Wheel Drive Systems, this bearing measures 109.5mm (4.311 inches) inside diameter, 158.8mm (6.25 inches) outside diameter and 21.2mm (o.834 inches) wide. Replaces OEM numbers ZP0735370150, 81676C1, 84592016, 47724311, 5133737, 83952531, K395101, H1482196, CAR118370, 9967690, CAR045180, CAR142088, K395101, ZP0735370150, 83952531, 47724311, 5133737, 84592016, 6914441, 9967690, 83985020, 89967690, CAR118370, 81676C1, 05133737, 47724311, H1482196, K395101, 81676C1 (Item #: 156047, Ref: JD10249) $78.00

Sector Shaft Oil Seal - Oil Seal, inner for Pitman Arm Sector Shaft. Used on 5000, 7000 (1965-1975), 5600, 6600, 7600 (1975-1981), 5610, 6610 (1981 and UP), POWER STEERING 5000, 7000 (1965-7/1970). Measures 2.000 Inches Outside Diameter, 1.500 Inches Inside Diameter and 0.250 Inches Wide. Wide. Replaces 81803190, C5NN3C615B (Item #: 161888, Ref: C5NN3C615B) $7.90

Shaft - Pivot Shaft for Center Power Steering Arm, 4.28 inches long. For tractor models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 152060, Ref: C5NN3N703C) $28.00

Spindle Bushing, Bearing and Seal Kit - This Spindle Bushing, Bearing and Seal Kit contains: 2 - C5NN3109A (1 5/8 inch X 2 inch X 1 7/8 inch) Bushings, 2 - C5NN3110A (1 3/4 inch X 2 inch X 1 7/8 inch) Bushings, 2 C0NN3A299A (2 inch ID X 2 7/8 inch OD) Thrust Bearings, 2 - C0NN3A208A (1 1/2 inch X 2 inch X 1/4 inch) Dust Seals. Used on Ford New Holland 5000, 5100, 5110, 5200, 5600, 6410, 6600, 6610, 6810, 7000, 7100, 7200, 7600, 7610 (Item #: 104568, Ref: SBBSKIT05) $36.00

Spindle Bushing, Lower - This Lower Spindle Bushing is measures 2.004 inch outside diameter, 1.760 inch inside diameter, wall thickness .119 inch, 1.860 inch long. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802797, C5NN3110A (Item #: 100641, Ref: C5NN3110A) $4.80

Spindle Bushing, Upper - This Upper Spindle Bushing measures 2 inch outside diameter, 1.645 inch inside diameter, 1.856 inch long, and wall thickness .176 inches. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802792, C5NN3109A (Item #: 100640, Ref: C5NN3109A) $5.40

Spindle Left Hand - If you are using 10.00 x 16 inch tires on your Ford Tractor, this may be the left hand spindle you need. The measurements are A - 10.687 inches, B - 1.498 inches, C - 1.748 inches, D - 1.797 inches, E - 1.125\ inches. This spindle uses C0NN3A299A Thrust Bearing, C5NN3109A Upper Bushing, C5NN3110A Lower Bushing, -WBKFD7 Wheel Bearing Kit and 313020 Front Wheel Hub, 6 Bolt. Used on some of the following models: 3600, 4100, 4600, 5000, 5100, 5600, 6600, 7000, 7100, 7600. (Item #: 100639, Ref: D2NN3106C) $319.00

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle Nut - Fits on front spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle Seal MFWD - On Mechanical Front Wheel Drive tractors, the seal (o-ring) goes between the axle housing and the spindle. It is used on many ZF Axles. Replaces OEM part numbers 81296C1, 83946009, 8603728, 3147244R1, ZP0634303409, 1390411028, 81296C1, 1964258C1, 3147244R1 (Item #: 124682, Ref: 83946009) $0.50

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.40

Spindle, Heat Treated - Left Hand - For Ford tractor models 5100, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number D6NN3106A, Dimension A: 16.000", Dimension B: 1.498", Dimension C: 1.638", Dimension D: 1.784", Dimension E: 1.625", Dimension F: .842", Left Side, Front wheel bearing kit use Item #: 100663, (Item #: 104547) $168.98

Spindle, Heat Treated - Right Hand - For Ford tractor models 5100, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7600, 7610, Replaces Ford OEM number D6NN3105A, Dimension A: 16.000", Dimension B: 1.498", Dimension C: 1.638", Dimension D: 1.748", Dimension E: 1.625", Dimension F: .842", Right Side, (Item #: 104549) $260.00

Spindle, High Clearance - LH - For Ford tractor models 5100 (1/1968-later), 5200, 5340 (1/1968-later), 5600 (1/1975-10/31/75), 6600 (1/1975-10/31/75), 7000 (10/1971-12/74), 7100 (1/1968-later), 7200, 7600 (1/1975-10/31/75), Replaces Ford OEM number C5NN3106K, Length: 16", Diameter: 1.75", Stem Diameter: 1.625", Stem Diameter: .843", Fits Left Hand Side, (Item #: 161169) $541.00

Spindle, High Clearance - RH - For Ford tractor models 5100 (1/1968-later), 5200, 5340 (1/1968-later), 5600 (1/1975-10/31/75), 6600 (1/1975-10/31/75), 7000 (10/1971-12/74), 7100 (1/1968-later), 7200, 7600 (1/1975-10/31/75), Replaces Ford OEM number C5NN3105N, Length: 16", Diameter: 1.75", Stem Diameter; 1.625", Stem Diameter: 0.843", Fits Right hand side, (Item #: 160192) $597.00

Spindle, LH - This spindle is used on tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Uses Bushing Kit SBK6581. Uses front wheel hub part number C9NN1104D. Also uses wheel bearing kit part number WBKFD6. (Item #: 100643, Ref: C5NN3106J) $85.00

Spindle, RH - This spindle is for tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Uses Bushing Kit SBK6581. Uses front wheel hub part number C9NN1104D. Also uses wheel bearing kit part number WBKFD6. (Item #: 100642, Ref: C5NN3105M) $87.00

Spindle, Right Hand - If you are using 10.00 x 16 inch tires on your Ford Tractor, this may be the right hand spindle you need. The measurements are A - 10.687 inches, B - 1.498 inches, C - 1.748 inches, D - 1.797 inches, E - 1.125\ inches. This spindle uses C0NN3A299A Thrust Bearing, C5NN3109A Upper Bushing, C5NN3110A Lower Bushing, -WBKFD7 Wheel Bearing Kit and 313020 Front Wheel Hub, 6 Bolt. Used on some of the following models: 3600, 4100, 4600, 5000, 5100, 5600, 6600, 7000, 7100, 7600. (Item #: 100638, Ref: D2NN3105C) $281.00

Steering Arm - Left Hand - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3131A, All Models With Power Steering, Left Side, Tie Rod attaches from bottom of steering arm, (Item #: 100665) $69.30

Steering Arm - Left Hand - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, Replaces Ford OEM number E3NN3131AA, LH Steering Arm, (Item #: 104739) $125.00

Steering Arm - Left Hand, Used - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3131A, All Models With Power Steering, Left Side, Tie Rod attaches from bottom of steering arm, For a new version of this item use Item #: 100665, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410665) $35.01

Steering Arm - Left Hand, Used - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, Replaces Ford OEM number E3NN3131AA, Left Hand Steering Arm, For a new version of this item use Item #: 104739, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446689) $70.01

Steering Arm - Right Hand - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3130A, With Power Steering, Right Side, Tie Rod attaches from bottom of steering arm, (Item #: 100666) $71.44

Steering Arm - Right Hand - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number E3NN3130AA, RH Steering Arm, Tie rod attaches to top of steering arm, (Item #: 104738) $142.00

Steering Arm - Right Hand, Used - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3130A, With Power Steering, Tie Rod attaches from bottom of steering arm, Right Hand, For a new version of this item use Item #: 100666, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410666) $44.01

Steering Arm - Right Hand, Used - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number E3NN3130AA, Tie rod attaches to top of steering arm, Right Hand Steering Arm, For a new version of this item use Item #: 104738, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446688) $78.01

Steering Arm Dust Seal - This Steering Arm Dust Seal fits between the Steering Arm and the Spindle. It measures 1 7/8 Inches (48mm) Outside Diameter, 1 1/2 Inches (38mm) Inside Diameter, 1/4 Inches (6mm) Thick. Replaces 81802845, C0NN3A208A (Item #: 104573, Ref: C0NN3A208A) $4.00

Steering Arm Right Hand - For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7700. Right Hand Steering Arm used with D2NN3105C, C5NN3105M, C7NN3105D. (Item #: 104736, Ref: C5NN3130J) $62.00

Steering Arm, Left Hand - This Left Hand Steering Arm is used on Ford / New Holland Tractors: 5000, 5100, 5340, 5600, 5610, 6600, 6610, 7000, 7100, 7200, 7600. Replaces C5NN3131B, C5NN3131J, 81813163 (Item #: 104737, Ref: C5NN3131B) $208.00

Steering Column Grommet - For tractor models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6000, 6600, 7000, 7600, 2310, 2610, 2810, 2910, 3010, 3110, 3310, 3610, 3910, 4010, 4110, 4410, 4610, 5010, 5110, 5610, 5910, 6410, 6610, 6710, 6810, 7010, 7310, 7410, 7610. 2-7/8 inch outside diameter X 1-1/4 inch inside diameter. (Item #: 126705, Ref: D2NN3A566B) $3.90

Steering Gear Assembly, Manual - Manual Steering Gear, does not include drop arm. (Fits some models with power assist steering). Fits: 5100, 5110, 5340, 5600, 5610, 5900, 6410, 6600, 6600C, 6600O, 6700, 7100, 7600, 7600C, 7600O. Replaces D2NN3503A, D7NN3503A, D5NN3503D, 83912775, C5NN3503F. Note: When making a right hand turn, the steering are moves counter clockwise. (Item #: 161569, Ref: D7NN3503A) $654.00

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476 (Item #: 124494, Ref: 8N3586) $2.10

Steering Shaft Bearing - Bearing is for the upper and lower ends of the steering shaft. Verify measurements of .49 inches wide, 2.04 inches outside diameter and 1.18 inches inside diameter. For tractor models Major, Power Major, Super major. Replaces 353075S. (Item #: 169746, Ref: E1ADKN3556) $11.60

Steering Shaft Bushing - Bushing assembly, upper consists of a rubber splined piece with a metal bushing. Fits many Ford Tractors 1965 and up, with manual and power steering. Replaces C5NN3517A, 81811803, 83903807, D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.20

Steering Shaft Seal - This Steering Shaft Seal is for 2-wheel drive models steering box with 2 arms. Goes in the base of the steering shaft. It measures 1.386 inch outside diameter, 0.866 inch inside diameter and 0.374 inch in width. Tractors: 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140, 4410 (1965-1975), 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or w/o cab, 1975-3/1976; w/o cab 4/1976-1981), 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (w/o cab 1981-9/1984). Replaces D5NN3N632A, E1NN3N632AA and 83929295. (Item #: 164336, Ref: E1NN3N632AA) $9.90

Steering Shaft with Nut - This Steering Shaft for manual steering is 28.750 inches long. It has right hand spiral. Turning the steering wheel clockwise causes the worm nut to travel up the shaft. It replaces original part numbers C5NN3A710B, D2NN3A710A and 81842811. If you need steering wheel nut order D5NN3N602A also. (Item #: 114039, Ref: D2NN3A710A) $73.00

Steering Wheel - This Steering wheel is 15 inch diameter with a 36 spline center hub. PVC grained cover material with covered spokes. For tractor models 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5110, 5610, 5900, 6410, 6600, 6610, 6810, 7010, 7610, 8010, Industrials: 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 545A, 555B. Replaces OEM number D2NN3600A, D7NN3600A. (Item #: 101427, Ref: D7NN3600A) $56.00

Steering Wheel - This 3 spoke (covered spoke) steering wheel measures 18 inches in diameter on an 11/16 (tapered) 36 splined hub. Not like original. For 4 cylinder models, 8N, NAA, 600, 700, 800, 801, 900, 2000, 4000, 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 6610, 7000. (Item #: 101425, Ref: D6NN3600B) $33.00

No
Picture
Steering Wheel Cap - Black Cap only fits 17 5/8 diameter steering wheels on models: (2000, 3000, 4000, 5000, 7000 1965-1975), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-1981), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2/90), (5610, 5900, 7610 1981-1991), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-1982), (3230, 3430, 3930, 4130, 4630 3/1990 and up), (4830, 5030 7/1990 and up), (5610S, 6610S, 7610S 1994 and up). (Item #: 152187, Ref: C7NN3655B) $5.70

Steering Wheel Nut - Steering Wheel Retaining Nut. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 7000, 7600. 11/16 inch - 20 NF thread. Replaces 356130S8, 83906211, C5NN3N602A, D5NN3N602A. (Item #: 101426, Ref: D5NN3N602A) $6.10

Steering center arm pivot shaft bushing - Bushing, 1 inch long, for power steering center arm pivot shaft. Tractors 5000, 7000, 2 used from 1965 to 1/1966. Upper bushing for center arm pivot shaft, 1 used on tractors 5000, 7000 (2/1966-1975); 5600, 6600, 7600 (1975-1981); 5610, 6610, 7610 (1981-3/1985). (Item #: 153962, Ref: C5NN3179A) $4.50

Taper Roller Bearing - Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349/819310, 819349 (Item #: 156177, Ref: ZP0750117062) $70.00

Tie Rod - For Ford tractor models 5100, 5110, 5600, 5610, 6410, 6600, 6610, 7600, 7710, Replaces Ford OEM number 81816513, C5NN3282F, Dimension A: 18:625", Dimension B: .937", (Item #: 104638) $17.50

Tie Rod - Right Hand - For Ford tractor models 5600 (Hi-Clearance), 5610 (L/ FWD), 5900 (L/ FWD), 6600 (Hi-Clearance), 7600 (Hi-Clearance), 7610 (L/ FWD), Replaces Ford OEM number D8NN3280GA, Length: 12.562", Diameter: 0.937", Fits Right Hand Side, (Item #: 161155) $34.98

Tie Rod Assembly - For Ford tractor models 5600, 5700, 6600, 6700 (APL1351 4WD Front Axle), Replaces Ford OEM number 81927851, 81927505, (Item #: 160203) $383.00

Tie Rod Clamp - For Ford tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610 (All 01/65 - later), Replaces Ford OEM number C5NN3287C, 81816724, (Item #: 104623) $9.50

Tie Rod End - End, Tie Rod, right hand outer, female end 0.937 inch 16 right hand threads, 4.250 inches to center of post. For tractor models: 5000, 5600, 5610, 6600, 6610, 7000, 7600. (Item #: 104622, Ref: C7NN3289E) $34.41

Tie Rod End - For Ford tractor models 4400, 4410, 5000, 5100, 5200, 5600, 5610, 6000, 6600, 6610, 7000, 7100, 7200, 7600, 7610, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number E3NN3307AA, C5NN3307F, 3.812" Long, 1" Diameter, 16 Right Hand Thread, (Item #: 100687) $19.10

Tie Rod Inner - End, right hand inner, 1.00 inch-16 thread. For tie rod with power steering, 3.75 inch to center of post. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610, 8000, 8200, 8600, 9000, 9200, 9600. (Item #: 100682, Ref: C7NN3289D) $14.50

Tie Rod Inner - End, left hand inner, for tie rod with power steering, 18.125 inches to center of post. For tractor models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces 81822048, D6NN3B161A. (Item #: 100681, Ref: C7NN3B161A) $22.50

Tie Rod Outer - End, right hand outer, 15.375 inch to center of post, .937 inch diameter. For Tie Rod with Power Steering. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces C5NN3280E, 1802851, 81802851, 81822049, 1822049, 81859488, C5NN3208B, C5NN3280C. (Item #: 100680, Ref: C7NN3280E) $23.10

Tie Rod Outer - End, left hand outer, 15.375 inches to center of post. Rod diameter is 0.937 inches. For Tie Rod with Power Steering. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces C5NN3281B, C5NN3281B, 81822050, 1822050. (Item #: 100679, Ref: C7NN3281A) $27.00

Tie Rod Tube - This is a Right Hand Tie Rod Tube used on 5000, 7000, 5600, 6600, 7600, 5610, 6610, 7610 (1981-3/1985). 16 inches. Replaces 86547157, C7NN3B624B. (Item #: 153561, Ref: C7NN3B624B) $37.00

Tie Rod Tube - This Tie Rod Tube measures 19.15 inches. If a 16 inch tube is needed, order part number C7NN3B624B. Replaces 86547157, C5NN3B624B. (Item #: 104613) $120.00

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Wheel Hub Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL1351 Mechanical Four Wheel Drive front ends. This part replaces, L35606, ZP1927576, 3216588R1, 81927576. Some of the models listed used more than one 4 wheel drive front end. Verify part number or axle number before ordering. Used on Ford 5600, 5700, 6600, 6700 (Item #: 124686, Ref: L35606) $29.90

Universal Parts and Accessories
Category: Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $123.80

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $42.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 6600 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy