FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 3930 Parts

Category: Steering

[Categories] [All 3930 Parts] [All Ford Models]

Axle Support Bushing - Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575/1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1 (Item #: 156131, Ref: CAR1015751) $92.58

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $15.98

Cylinder End - Left Hand - For Ford tractor models 3430, 3930, 4630, 4830, 5030, Replaces Ford OEM number E7NN3N981AA, 83983437, A: 2.400", B: 1.250", 12 UNF RH Thread, Fits Left Hand Side, (Item #: 124295) $187.00

Cylinder End - Right Hand - For Ford tractor models 3230, 3430, 3930, 4630, 4830, 5030, Replaces Ford OEM number E7NN3B539AB, A: 3.280", B: 7/8", 14 UNF RH Thread, Fits Right Hand Side, (Item #: 124294) $116.72

Drag Link End - Rear - For Ford tractor models 3430, 3930, 4610, 4630, 4830, 5030, 5600, 6600, 7600 (All with Power Steering), Replaces Ford OEM number E1NN3307AA, 83932651, Diameter 1.125", Length 41.190" from center of ball stud to end of tube, (Item #: 104588) $70.00

Front Axle - Differential Housing Bushing - The measurements on this bushing are: 4.525 inches outside diameter, 4.127 inches inside diameter, 1.730 inches long. This bushing is used on Carraro 4WD front end. Replaces OEM numbers 101565, K965266, CAR1015651, 83945601, CAR101565/1, CAR123478, 83930062, 9967993, R113766, 3541396M1, 040953R1 (Item #: 156132, Ref: CAR1015651) $79.00

Front Axle Bracket - Less Bushing - Fits 3230, 3430, 3930, 4000 (1965 and newer), 4100, 4130, 4330, 4340, 4600, 4610, 4630, 4830, 5030. Bushing part number C5NN3N052A is available separately. (Item #: 125388, Ref: C5NN3N050B) $116.00

Front Axle Bracket Bushing - This Front Axle Bracket Bushing is used with C5NN3N050B Front Axle Bracket. It replaces C5NN3N052A, 81802773 (Item #: 153973, Ref: C5NN3N052A) $8.10

Front Axle Differential Shaft - Carraro - For Ford tractor models 3230, 3430, 3930, 4130, 4630, 4830, 5030 Replaces Ford OEM number CAR113494, , Compatible with John Deere tractor models 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5325, 5400, 5410, 5415, 5420, 5425, 5500, 5510, 5520, 5525, 5615 (Turkish), 5715 (Turkish) Replaces John Deere OEM number R113949, , Compatible with New Holland tractor models T4020V, T4030V, T4040V, T4050V, TN60VA, TN65V, TN70VA, TN75V, TN75VA, TN95VA, Replaces Carraro manufacturer number 113494, Replaces OEM number 83983349, 5194185, Manufactured by Carraro to exact OEM specifications, (Item #: 154723) $34.10

No
Picture
Front Axle Housing - Carraro - For Ford tractor models 3230, 3430, 3930, 4130, 4630, 4830, 5030 Replaces Ford OEM number CAR128053, , Compatible with John Deere tractor models 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5420, 5500, 5510, 5615, 5715, Replaces John Deere OEM number RE45902, Replaces Carraro manufacturer number 128053, Manufactured by Carraro to exact OEM specifications, (Item #: 154570) $483.00

Front Axle Support Bushing - For Ford tractor models 3230, 3430, 3930, 4000, 4100, 4130, 4330, 4340, 4600, 4610, 4630, 4830, 5030, Replaces Ford OEM number C5NN3A443A, 81802938, Length: 1.26" (32mm), I.D.: 1.63" (41.7mm), Wall Thickness: .07" (1.7mm), (Item #: 146706) $7.40

Front Axle Thrust Washer - Used in some Carraro Mechanical Four Wheel Drive front axles, this part replaces CAR115776, 47109296, CAR123478, 83944351, 9967994, K395022 (Item #: 156133, Ref: CAR115776) $24.10

Front Socket - Drag Link End, front, 9.00 inch to center of post for drag link. 7/8 diameter, used with manual or power steering. Tractors: 3430, 3930, 4000 (1965 to 1975), 4130, 4600 (1975 to 1981), 4830, 5030 (with manual steering, 4/1970 and up). Replaces C5NN3A300A, 81825595, 83980679. (Item #: 100675, Ref: D0NN3A300A) $23.20

Pitman Arm - This Steering Pitman Arm is used on manual and power steering gear boxes with a single drop arm. It has 36 splines and replaces original part numbers C5NN3590A and 81803153. For tractor models 2310, 2610, 2910, 3430, 3610, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 535, 5100, 5110, 5600, 5610, 6600, 6610 and 7600. (Item #: 104740, Ref: C5NN3590A) $189.54

No
Picture
Planetary Gear - For Ford tractor models 2310, 2810, 2910, 3055, 3230, 3430, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, Compatible with Ford Construction and industrial models 250C, 260C, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 575E, 655, 655A, 655C, 655D, 675D, 675E Replaces Ford OEM number 86584272, 81803330, , Compatible with New Holland tractor models TV140, TV145, TV6070, Compatible with New Holland Construction and industrial models B95, B95LR, B95TC, B110, B110B, LB75, LB75B, LB90, LB90B, LB110, LB110B, Replaces New Holland OEM number 86584272, (Item #: 176413) $102.00

Power Steering - Pump with Reservoir. Use with o-ring fittings. For 2830, 2930, 3930, 4130, 4630, 4830, 5030. Replaces OEM number F1NN3K514BA99. (Item #: 114295, Ref: R4104) $532.00

Power Steering Cylinder - This Power Steering Cylinder is used on Ford Tractors: 3230, 3430, 3930, 3930H, 4130, 4630, 4630O, 4830, 4830O, 5030, 5030O. Replaces 83981561, E7NN3A739BB (Item #: 169526, Ref: E7NN3A739BB) $483.00

Power Steering Cylinder Repair Kit - Used to repair original equipment E7NN3A739AA, E7NN3A739BB, E7NN3A540CB, E7NN3A540BA cylinders. Compatible with Ford Tractor(s) 3230 (05/31/1994-earlier), 3430 (05/31/1994-earlier), 3930 (05/31/1994-earlier), 4630 (05/31/1994-earlier), 4830 (05/31/1994-earlier), 5030 (05/31/1994-earlier) (Item #: 182509, Ref: FP526) $63.00

Power Steering Cylinder Seal Kit - For Ford tractor models 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5610, 6610, 6810, 7610, 7710, 7810, 7910 Replaces Ford OEM number CAR49101, 83957762, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, 6610S, 7610S, 8010, Replaces Carraro manufacturer number 49101, For 4WD only, (Item #: 114027) $47.00

Power Steering Filter Kit - Power Steering Filter - Power Steering Filter for Pump Reservoir. For 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 5600, 5610, 5610S, 5700, 5900, 6600, 6610, 6610S, 6700, 6710, 7000, 7600, 7610, 7610S, 7700, 7710, 7810S, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5 Replaces 81818748, 84536381, 83936985, 83923728, EDPN3K758A, E0NN3K58AA, E0NN3K758AA, EDPN3K58A, K964924, K964931, K964954, 1004, CR1004, CR665, 665, 84419022, K262979, K964954. (Item #: 113433, Ref: EDPN3K758A) $11.20

Power Steering O-Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530, 530A, 531, 532, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655C, 655D, 675, 675D, 750, 755, 755A, 755B, Replaces Ford OEM number D2NN3D587A, D7NN3D587A, (Item #: 154787) $2.20

Power Steering Pump - This power steering pump used with flair fitting on models using Steering Gear Box, pump has Relief Valve. For tractor models 2310, 234, 2610, 2810, 2910, 3230, 334, 335, 3430, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 5100, 5600, 5610, 5900, 6600, 6610, 6710, 7100, 7600, 7610, 7710. Rated Pressure 725-1305 at 500-2000rpm. Safety valve Opening Pressure 942-1087 PSI, Safety Valve Full Open: 1087-1305 PSI. Unit designed for o-ring fitting, not supplied w/pump. This pump fits tractors with JIC fittings. Replaces 82858430, E6NN3K514PA99M (Item #: 113208, Ref: E6NN3K514PA99M) $285.00

Power Steering Pump - For Ford tractor models 3230 (3/90-9/93), 3430 (3/90-1/93), 3930 (3/90-7/99), 3930 (NO, 3/90-8/99), 3930 (N, 3/90-6/95), 3930 (H, 3/90-8/99), 4130 (3/90-7/99), 4130 (NO, 3/90-8/99), 4130 (N, 3/90-6/95), 4630 (3/90-7/99), 4630 (NO, 3/90-8/99), 4630 (N, 3/90-6/95), 4630 (O, 3/90-up), 4830 (N, O, 7/90-5/94), 5030 (10/92-4/98), 5030 (O, 6/94-4/98), Replaces Ford OEM number E8NN3K514BA, 83983181, With Flat Face Fittings, (Item #: 112160) $531.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $12.60

Power Steering Seal Kit - This Power Steering Seal Kit is used on steering gear assemblies. It contains (1) C9NN3747A, (1) C9NN3E614A, (2) C9NN3A590A, (2) C9NN3D624B, (1) E1NN3N632AA. Replaces EGPN3N503AA, 83957121 (Item #: 168433, Ref: EGPN3N503AA) $8.70

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.60

Ring Gear - For Ford tractor models 3230, 3430, 3930, 4130, 4630, 4830, 5030 Replaces Ford OEM number CAR125339, , Compatible with John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5420, 5500, 5520, 5615, 5715, Replaces John Deere OEM number R113991, Replaces Carraro manufacturer number 125339, (Item #: 154606) $326.00

Self Locking Nut - Tie Rod End - For Ford tractor models 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5110, 5610, 6410, 6610, 6810, 7610, 7710, 7810, 7910 Replaces Ford OEM number CAR22437, 85805982, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, 6610S, 7010, 7610S, 8010, Replaces New Holland OEM number CAR22437, 85805982, Replaces Carraro manufacturer number 22437, M18 x 1.5, (Item #: 159936) $2.50

Spindle - LH - Used on High-Clearance models 3230, 3430, 3930, 4130, 4630, 4830, 5030, the dimensions on the spindle are A: 12.312 inches, B: 1.464 inches, C: 1.375 inches, 0.750 inches. The part replaces E9NN3106AA, 82859846. The following associated parts are sold separately: C5NN3A299A Thrust Bearing, C5NN3110B Spindle Bushing (2 used), C9NN1104E Front Wheel Hub, EHPN1200C Wheel Bearing Kit. (Item #: 104532, Ref: E9NN3106AA) $267.00

Spindle - LH - Used on Low-Clearance, Orchard, Vineyard and some 2WD industrial models, the dimensions on the spindle are A: 8.625 inches, B: 1.464 inches, C: 1.375 inches, 0.750 inches. The keyway is located at 9 o'clock. The following associated parts are sold separately: C5NN3A299A Thrust Bearing, C5NN3110B Spindle Bushing (2 used), C9NN1104E Front Wheel Hub, EHPN1200C Wheel Bearing Kit. (Item #: 104535, Ref: E9NN3106BA) $260.00

Spindle - LH, Low Profile - The measurements on the spindle are A: 8.625 inches, B: 1.495 inches, C: 1.624 inches 0.999 inches. This spindle is used on Low Profile models of Ford / New Holland: 3430, 3930, 4130, 4630, 4830, 5030, TN55, TN55D, TN65, TN65D, TN70, TN70D, TN75, TN75D. Uses wheel bearing kit WBKFI01 and hub 5166086 each sold separately. (Item #: 104558, Ref: 5166111) $390.00

Spindle - RH - Used on High-Clearance models 3230, 3430, 3930, 4130, 4630, 4830, 5030, the dimensions on the spindle are A: 12.312 inches, B: 1.464 inches, C: 1.375 inches, 0.750 inches. The part replaces E9NN3105AA, 82859849. The following associated parts are sold separately: C5NN3A299A Thrust Bearing, C5NN3110B Spindle Bushing (2 used), C9NN1104E Front Wheel Hub, EHPN1200C Wheel Bearing Kit. (Item #: 104533, Ref: E9NN3105AA) $275.00

Spindle - RH - Used on Low-Clearance, Orchard, Vineyard and some 2WD industrial models, the dimensions on the spindle are A: 8.625 inches, B: 1.464 inches, C: 1.375 inches, 0.750 inches. The keyway is located at 9 o'clock. The following associated parts are sold separately: C5NN3A299A Thrust Bearing, C5NN3110B Spindle Bushing (2 used), C9NN1104E Front Wheel Hub, EHPN1200C Wheel Bearing Kit. (Item #: 104534, Ref: E9NN3105BA) $268.00

Spindle - RH, Low Profile - The measurements on the spindle are A: 8.625 inches, B: 1.495 inches, C: 1.624 inches 0.999 inches. This spindle is used on Low Profile models of Ford / New Holland: 3430, 3930, 4130, 4630, 4830, 5030, TN55, TN55D, TN65, TN65D, TN70, TN70D, TN75, TN75D. Uses wheel bearing kit WBKFI01 and hub 5166086 each sold separately. (Item #: 104553, Ref: 5166109) $396.00

Spindle Bushing - Used on multiple Ford Tractors. It measures 1.6 inches outside diameter, 1.5 inches inside diameter and is 1.5 inches long. It replaces original part number C5NN3110B and 81802798. (Item #: 100628, Ref: C5NN3110B) $4.20

Spindle Thrust Bearing - This spindle bearing is for models 2310, 2600, 2610, 2910, 3430, 3600, 3610, 3910, 3930, 4000, 4110, 4130, 4200, 4600, 4610, 4630 all replacing part numbers 81802806, and 81802871. Inside Diameter 1.496 inches. Outside Diameter 2.208 inches. Width 0.624 inches. (Item #: 100635, Ref: C5NN3A299A) $7.20

Spindle, High-Profile (LH) - The measurements on the spindle are A: 11.375 inches, B: 1.495 inches, C: 1.624 inches 0.999 inches. This spindle is used on the left side High Profile models of Ford / New Holland: 3430, 3930, 4130, 4630, 4830, 5030, TN55, TN55D, TN65, TN65D, TN70, TN70D, TN75, TN75D. Used wheel bearing kit WBKFI01 and hub 5166086 each sold separately. (Item #: 104537, Ref: 5166101) $563.50

Spindle, High-Profile (RH) - The measurements on the spindle are A: 11.375 inches, B: 1.495 inches, C: 1.624 inches 0.999 inches. This spindle is used on High Profile models of Ford / New Holland: 3430, 3930, 4130, 4630, 4830, 5030, TN55, TN55D, TN65, TN65D, TN70, TN70D, TN75, TN75D. Used wheel bearing kit WBKFI01 and hub 5166086 each sold separately. (Item #: 104536, Ref: 5166099) $535.00

Steering Arm, LH - This Left Hand Steering Arm is used on multiple Ford / New Holland Models. It replaces original part numbers 5166080 (Item #: 166292, Ref: 5166080) $66.98

Steering Arm, RH - This Right hand Steering Arm is used on multiple Ford / New Holland Tractorts. It Replaces part numbers 5166081 and 87621271 (Item #: 166288, Ref: 5166081) $199.00

Steering Joint - This Steering Joint is 7.040 over all length. The Inner Thread is M20 X 1.5 RH Thread. The Outer Thread is M18 X 1.5 LH Thread. Replaces 1966127C1, 83957148, CAR49006, 1-33-743-602, 112508A1 (Item #: 104634, Ref: CAR49006) $63.00

Steering Motor - This Steering Motor is used on the Ford New Holland Tractors: 3230, 3430, 3930, 4130, 4630, 4830, 5030. It is used on 2 wheel drive from 3/90 and on 4 wheel drive from 10/96 on (for select models). It replaces original part numbers 83986295, E9NN3A244BA (Item #: 160075, Ref: E9NN3A244BA) $479.00

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.10

Steering Shaft Bearing - Bearing is for the upper and lower ends of the steering shaft. Verify measurements of .49 inches wide, 2.04 inches outside diameter and 1.18 inches inside diameter. For tractor models Major, Power Major, Super major. Replaces 353075S. (Item #: 169746, Ref: E1ADKN3556) $11.60

Steering Shaft Bushing - Bushing assembly, upper consists of a rubber splined piece with a metal bushing. Fits many Ford Tractors 1965 and up, with power or manual steering. Replaces C5NN3517A, 81811803, 83903807, D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.20

Steering Shaft Bushing - For Ford tractor models 2310, 2600, 2610, 2910, 3000, 3230, 3430, 3500, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4330, 4340, 4400, 4500, 4600, 4610, 4630, 4830, 5030, Compatible with Ford Construction and industrial models 233, 234, 333, 334, 335, 420, 515, 535, Replaces Ford OEM number E1ADKN3558, (Item #: 161602) $4.70

Steering Shaft Seal - This Steering Shaft Seal is for 2-wheel drive models steering box with 2 arms. Goes in the base of the steering shaft. It measures 1.386 inch outside diameter, 0.866 inch inside diameter and 0.374 inch in width. Tractors: 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140, 4410 (1965-1975), 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or w/o cab, 1975-3/1976; w/o cab 4/1976-1981), 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (w/o cab 1981-9/1984). Replaces D5NN3N632A, E1NN3N632AA and 83929295. (Item #: 164336, Ref: E1NN3N632AA) $9.90

Steering Wheel - This Steering wheel is 15 inch diameter with a 36 spline center hub. PVC grained cover material with covered spokes. For tractor models 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5110, 5610, 5900, 6410, 6600, 6610, 6810, 7010, 7610, 8010, Industrials: 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 545A, 555B. Replaces OEM number D2NN3600A, D7NN3600A. (Item #: 101427, Ref: D7NN3600A) $56.00

No
Picture
Steering Wheel Cap - Black Cap only fits 17 5/8 diameter steering wheels on models: (2000, 3000, 4000, 5000, 7000 1965-1975), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-1981), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2/90), (5610, 5900, 7610 1981-1991), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-1982), (3230, 3430, 3930, 4130, 4630 3/1990 and up), (4830, 5030 7/1990 and up), (5610S, 6610S, 7610S 1994 and up). (Item #: 152187, Ref: C7NN3655B) $5.70

Taper Roller Bearing - Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349/819310, 819349 (Item #: 156177, Ref: ZP0750117062) $70.00

Tie Rod (Steering Cylinder) - This Tie Rod End is 6.750 from center of ball joint to end of rod. 18mm x 1.5 right hand thread. Replaces CAR48998, 81875595, 81878543, 1537612C1, 137048A1 (Item #: 104374, Ref: CAR48998) $88.00

Tie Rod Assembly - For Ford tractor models 3430, 3930, 4130, 4630, 4830, 5030, Replaces Ford OEM number 5166076, 5166077, 5166075, 5109553, 587302, 4997704, Tie Rod Length: 37.250", Tie Rod Width: 1.10", (Item #: 160141) $307.00

Tie Rod End - For Ford tractor models 3230, 3430, 3930, 4630, 4830, 5030, Compatible with International Construction and industrial models 3500A, Replaces OEM number E7NN3278AA, Dimension A: 17.812", Dimension B: .935", (Item #: 104642) $117.00

Tie Rod End (LH) - This Tie Rod End measures 15/16 inch - 16 thread. It is 3.940 inches from center of ball joint to end of threads. It is used on some Ford models: 3230, 3430, 3930, 4130, 4630, 4830, 5030. Replaces OEM E7NN3289DA (Item #: 104643, Ref: E7NN3289DA) $108.00

Tie Rod Outer - Tie Rod End, left hand, 19.00 inches by 3/4 inch diameter, for manual or power steering equipped tractors. Left hand and right hand 1965 to 5/1967; Left hand only 6 of 1967 to 1975. Tie Rod End for diesel and gas applications. For 4000, 4600, 4610. (Item #: 100677, Ref: C5NN3278A) $22.50

Tie Rod Outer - End, right hand outer, female, .750 inch-16 thread, 3.75 inch to center of post, for tie rod with manual or power steering. For 3430, 3930, 4000, 4000 US Built, 4100, 4130, 4600, 4610, 4630, 4830, 5030. Replaces C5NN3289C, 81815989, 1815989 (Item #: 100676, Ref: C5NN3289C) $19.30

Tie Rod Shaft - This Tie rod shaft is right side. 0.740 inch diameter, with 7 notches, 19 inches long. Tractors: 3430, 3930, 4000, 4130, 4610, 4630, 4830, 5030 (Item #: 104609, Ref: C5NN3282E) $44.90

No
Picture
Tie Rod Tube - For Ford tractor models 3430, 3930, 4130, 4630, 4830, 5030 Replaces Ford OEM number 5166076, , Compatible with New Holland tractor models TN55, TN55D, TN60A, TN60DA, TN65, TN65D, TN70, TN70A, TN70D, TN70DA, TN75, TN75A, TN75D, TN75DA, TN85DA, Replaces New Holland OEM number 5166076, Overall length: 37.25", Width: 1.125", M20 x 1.0 RH Thread, (Item #: 174177) $130.00

Universal Parts and Accessories
Category: Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $123.80

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $42.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.00

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 3930 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy