FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 6700 Parts

Category: PTO / Driveline

[Categories] [All 6700 Parts] [All Ford Models]

Brake Band - Brake Band, for PTO Drive Clutch. For tractor models 5000, 5110, 5600, 5610, 5700, 5910, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710. Replaces 47124034, 82003457, 9845550, E0NNB726AA, E0NNB726AB. (Item #: 128506, Ref: E0NNB726AB) $32.00

Clutch Pack Assembly, Independent PTO - Includes 3 Discs and 3 Plates. For tractor models 5000, 7000. Replaces D5NNN751D, D5NNN751A, D3NNN786A, D3NNP743A, D5NNN751B, D3NNN751D, C3NN7D211A, PBB77573A, C0NN7B421A, 83908229, E3NN7R007AA, 373227S. (Item #: 152062, Ref: D5NNN751D) $247.00

$Ford 6700 Dual Power\ PTO Disc$
Dual Power/ PTO Disc - This Dual Power/PTO Disc measures 5.84 inches outside diameter, 4.500 inside diameter with 52 teeth. It replaces original part numbers C9NNP743A, C9NNP743D, D3NNP743A, 81822308, 81830023, 81830026. (Item #: 109833, Ref: C9NNP743D) $12.50

Hub - Hub, PTO Drive Clutch, 25 teeth and 52 teeth. For 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710. (Item #: 165269, Ref: F1NNN750AA) $138.00

Idler Gear Support - Hydraulic Pump Idler Gear Support part number C7NN7049D has a 2.999 inch bearing outside diameter. The tube is 2.060 inches in length. It is used on the following, all 01/01/1965 through 04/30/1971: 5000, 5100, 5200, 7000, 7100, 7200, 5600, 6600, 7600, 6700, 7700, 5610, 6610, 7610, 6710, 7710 It replaces original part number C7NN7049D C7NN7N085B, D9NN7N087A. (Item #: 179989, Ref: C7NN7049D) $45.90

Idler Gear Support - Hydraulic Pump Idler Gear Support part number C7NN7049D has a 2.890 inch Bearing outside diameter. The tube is 1.610 inches in length. This is used on (5000, 5100, 5200, 7000, 7100, 7200, All 05/01/1971 and up) 5600, 6600, 7600, 6700, 7700, 5610, 6610, 7610, 6710, 7710. Replaces C9NN7049C. (Item #: 170969, Ref: C9NN7049C) $84.00

Oil Seal, PTO Input Shaft - This PTO Input Shaft Oil Seal measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. For models 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8600, 8700, 9000, 9600, 9700. All for tractors with a 7 or 8 speed transmission. Replaces 81801990, C5NN2N258A, C5NN2N258C, C5NN799A, C5NNE2A258B. (Item #: 165141, Ref: 195501M1) $5.48

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Cap - This PTO Cap is 4 inches long. It will not work on 5 inch PTO shafts. It has 65mm outside threads. It replaces OEM numbers: C5NN726B C5NN726A, SBA378110020, 81801856, 47811118 (Item #: 155020, Ref: C5NN726A) $22.10

PTO Clutch Pack Sealing Ring - This PTO Clutch Pack Sealing Ring is used with D2NNN751D and E0NNN751BA Clutch Packs. 2.375 Inch Outside Diameter. Three used per tractor. Replaces 8313283, 81809513 and 313283. (Item #: 168315, Ref: 313283) $4.10

PTO Clutch Plate - This is a Steel PTO Clutch Plate. It measures 6.062 inches outside diameter, 4.448 inch inside diameter and has 60 teeth. It replaces original part numbers 81808607, D6NNC730A, PBB77573A, PBB77573AA, 1102-5506, 81565601. (Item #: 104211, Ref: PBB77573A) $5.10

PTO Drive Clutch Housing - Is some applications require replacing OE C9NN7R007A with OE D5NN7R007A when used with single speed PTO. Used on 3600, 4600, 5000, 5100, 5110, 5190, 5200, 532, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700. This part replaces Ford New Holland part numbers: D5NNN707A, D5NNN07A, 83903939, 81827131 (Item #: 151874, Ref: D5NNN707A) $259.00

PTO Drive Clutch Hub - For 5700, 5900, 6410, 6810, 7410, 7810, 7910, 8210, (5000, 7000, both 1965 and up with Single/Two Speed), (5600, 5610, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, all with Single/Two Speed). PTO Drive Clutch Hub replaces D2NNN750A. For tractor models with 8 or 10 Plate Independent PTO Clutch. 25 teeth and 52 teeth. (Item #: 165269, Ref: E0NNN750AA) $138.00

PTO Drive Plate - Drive Plate, 15 spline, PTO drive. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 Replaces C5NN777A, C5NNN777A, 81801947 (Item #: 154416, Ref: C5NNN777A) $55.00

PTO Drive Plate - This PTO Drive Plate has 20 splines. If you need 15 splines, order C5NNN777A. Used on 5000, 5600, 5610, 5610S, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8000, 8010, 9000. Replaces E1NNN777AB, E2NN777AA (Item #: 104264, Ref: E1NNN777AB) $79.00

PTO Drive Shaft - Shaft, 15/25 teeth, PTO drive. 39.81 inches long. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Replaces 81805444, C5NN7A684A, E1NNN777AB, 83936827. (Item #: 150954, Ref: C5NN7A684AA) $167.00

PTO Drive Shaft - PTO Drive Shaft, 20/25 teeth, 39.870 inches long PTO Drive. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Item #: 115412, Ref: E4NN7A684AA) $200.91

PTO Friction Disc - PTO Friction Disc with Internal Splines, Single-Speed. For tractor models: 5000, 7000 (1965-1975), 5600, 5700, 6600, 6700, 7600, 7700 (1975-1981), 5610, 6610, 6710, 7610, 7710 (single and 2-speed, 1981 and up), 8000 (10/1969-1978), 9000 (1969-1978).D1NNP743A (Item #: 109833, Ref: C9NNP743D) $12.50

PTO Friction Disc - PTO Friction Disc with Internal Splines. Used on PTO with 2-Speed Transmission. For tractor models 5000, 7000 (6/1973-1975), 5600, 5700, 6600, 6700, 7600 (single and 2-speed, 1975-1981). (Item #: 109833, Ref: D3NNP743A) $12.50

PTO Output Cover Gasket - Used on many Ford / New Holland Tractors built 1965 and later. Replaces OEM part numbers C5NN7086A, 81815558 (Item #: 179414, Ref: C5NN7086A) $0.90

PTO Output Shaft Seal - Note that two size seals were used on the output shaft on many of the models listed. Verify measurements or OEM number before ordering. This seal measures 74.62mm inside diameter x 95.24mm outside diameter x 9.5mm wide (3.75 inches x 2.85 inches x 0.375 inches wide). Used on Ford 3600, 4600, 5000, 5100, 5110, 5190, 5200, 532, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8010, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces Ford / New Holland part numbers D9NNN710BB, D9NNN710B, 83944032 (Item #: 189274, Ref: D9NNN710B) $12.10

PTO Output Shaft Seal - Note that two size seals were used on the output shaft on many of the models listed. Verify measurements or OEM number before ordering. This seal measures 74.6mm inside diameter x 95.6 outside diameter x 12.5mm wide (3.75 inches x 2.85 inches x 0.56 inches wide). Used on Ford / New Holland 3600, 4600, 5110, 532, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 6810S, 7010, 7410, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8670, 8670A, 8700, 8730, 8770, 8770A, 8830, 8870, 8870A, 8970, 8970A, 9200, 9700, TS100, TS100 Brazilian, TS110, TS110 Brazilian, TS115, TS120 Brazilian, TS80, TS90, TV140, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 81819768, 83955173, 9823545, 89823545, D9NNN710BC, D9NN710BC (Item #: 128143, Ref: 9823545) $26.80

PTO Piston O-Ring - This is the Inner PTO Piston O-Ring Seal. Replaces 373227S 83416992. (Item #: 172963, Ref: 373227S) $1.70

PTO Piston O-Ring - This is the Outer PTO Piston O-Ring Seal. It replaces C0NN7A548A, CFPN6333A/B, 81805281 (Item #: 172955, Ref: C0NN7A548A) $4.10

PTO Piston Return Spring - Replacing Ford / New Holland part numbers 81871420, 83935173, C0NN7C151A, 9823824, D7NNC732A, 81804819, this Spring is used in tractors with independent PTOs. Used on Ford / New Holland models: 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8010, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TS100, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Item #: 124549, Ref: D7NNC732A) $20.40

PTO Shaft - For tractor models (5100, 5200, 7100, 7200, all with 2 Speed after 6/1973), (8000, 9000, both with 2 speed 1968-1978), (5600, 5700, 6600, 6700, 7600, 7700, all with 2 speed after 1975). PTO Shaft 540 RPM. 11.475 inches Long. 36 and 38 tooth splines. (Item #: 109834, Ref: D2NNB728A) $92.00

PTO Shaft - For tractor models (5100, 5200, 7100, 7200, all with 2 speed after 6/1973), (8000, 9000, both with 2 speed 1968-1978), (5600, 5700, 6600, 6700, 7600 both with 2 speed 1975 and later). PTO Shaft 1000 RPM. 11.475 inches long, 38 tooth splines on tractor side, 21 splines on implement side. Replaces D2NNB728B, C7NNB728E, 81827171 (Item #: 110628, Ref: D2NNB728B) $212.00

PTO Shaft - For tractor models (5110, 5610, 5900, 6410, 5410 UK, 6610, 6710, 6810, 7610, 7710, all with single speed PTO 10/1989 and later), (5640, 6650, 7740 all with single speed 11/1990 and later). PTO Shaft 540 RPM. 11.764 inches long, 28 tooth drive splines. (Item #: 111990, Ref: E8NN710AA) $336.00

PTO Shaft - For 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710, all less sync trans. PTO Shaft 39.87 inches long, 20 and 25 spline. (Item #: 111991, Ref: E1NN7A684AB) $141.00

PTO Shaft Bearing, Front - For tractor models: Dexta, Super Dexta, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 3900, 4000, 4100, 4110, 4110LCG, 4400, 4500, 4600, 4610, 5000, 5600, 5610, 5610S, 5900, 6600, 6610, 6610S, 6700, 6710, 6810, 7600, 7610, 7610S, 7700, 7710, 7810S, 8010. All WITH 1 3/8 Inch DIAMETER PTO SHAFT. WILL NOT FIT 1 1/8 Inch DIAMETER PTO SHAFT. Replaces 81800755, C5NN7118A, 20705250, E75GE9 (Item #: 178129, Ref: E75GE9) $7.00

PTO Shaft Seal - This new PTO Shaft Seal fits the following tractors with single speed PTO's: 5000, 5600, 5610, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7600, 7610, 7700, 7710. It has an inside diameter of 1.42 inches (36.07 mm), outside diameter of 2.5 inches (63.65 mm) and a thickness of 0.30 inch (7.84 mm). It replaces original part numbers C5NN701B, C5NN710B, C5NNN710A, C5NNN710B, D9NNN710CA, D9NNN710DA, 81819064. (Item #: 164442, Ref: C5NN710B) $4.70

PTO Shaft Support - Support, for PTO Shaft and Drive Clutch Valve. DOES NOT have relief oil hole in support. For tractor models 5000, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Replaces original part numbers C2NNN776A, D2NNN776A and 81826819. (Item #: 111897, Ref: D2NNN776A) $23.30

PTO Shaft, 540 RPM - 1 3/8 inch 6 Spline Shaft, PTO Drive Output, 540 RPM. For tractor models 5000, 5600, 5610S, 5610, 5700, 6600, 6610S, 6610, 6700, 6710, 7000, 7600, 7610S, 7610, 7700, 7710, 7810, 7910, 8210, 8670, TW5, TW15, TW25, TS90, TS100, TS110, TW10, TW20. Replaces E6NN728AA, E6NNB728AA, 9823572, 83959984, 83913106 (Item #: 109919, Ref: E6NNB728AA) $142.00

PTO Shaft, Rear Lower - This PTO shaft measures 12.03 inches in length and has 29 splines. It is for Single-Speed 540 RPM Independent PTO Drive Shaft. Tractors: 5000, 7000 (6/1973-1975), 5600, 5700, 6600, 6700, 7600, 7700 (1975-1981), 5610, 6610, 6710, 7610, 7710 (1981-9/1989), 5610S, 6610S, 7610S (1/1994-12/1994). Replaces D2NNN752B, E3NNN752AA. (Item #: 129295, Ref: E4NNN752AA) $99.00

PTO Thrust Washer - This PTO Thrust Washer is used on 5000, 5600, 5610, 5610S, 5640, 5900, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7610S, 7700, 7710, 7740, 8000, 8210, 8240, 8340, 8530, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9000, 9600, 9700, TS100, TS110, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces C5NNN783A, 81801955 (Item #: 178082, Ref: C5NNN783A) $5.70

Spring - Feathering Spring, standard, .165 inch thick. For Independent PTO, 540 RPM single speed or 2 speed 540/1000 RPM. Tractors: 5000, 7000 (1965-1975), 5600, 5700, 6600, 6700, 7600, 7700 (1975-1981), 5610, 6610, 6710, 7610, 7710 (1981-10/1991), 5610S, 6610S, 7610S, 7810S (1/1994 and up). (Item #: 172542, Ref: D3NNP733A) $22.70

Universal Parts and Accessories
Category: PTO / Driveline

Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124837, Ref: AB4111WY138) $122.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

Overrun Coupler with Quick Release - This Overrun Coupler features a Quick Release. It fits applications needing a male and female end of 6 splines and 1 3/8 inches. Rated up to 70 horsepower. (Item #: 182532, Ref: S.23639) $56.00

PTO Adapter - I.D. 1.125 inch 6 spline Female to O.D. 1.375 inch 6 spline Male, ExtendsL 1.125 inches, Length: 3 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103190, Ref: PA01) $10.88

PTO Adapter - Inside diameter 1.375 inch 21 spline female to outside diameter 1.375 inch 6 spline male. Extends: 4.125 inch, length: 6.375 inch. Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103188, Ref: PA08) $30.48

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends: 4.125 inches, Length: 6.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103187, Ref: PA09) $70.00

PTO Adapter - Extends and increases: 1 1/8" female 6 spline to 1 3/8" male 6 spline. 4-5/8" length. Extends PTO 2-3/4" . Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". Also Replaces T353F. (Item #: 103191, Ref: PA04) $21.00

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.125 inch 6 spline male, Extends: 2.750 inches, Length: 5.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103192, Ref: PA05) $20.00

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends PTO Shaft 4.00 inches, Length: 5.75 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 121311, Ref: PA06) $26.00

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.125 inches, Length: 5.875 inches, Max HP: 70 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 152729, Ref: PA11) $39.70

PTO Adapter - I.D. 1.750" 20 spline female to O.D. 1.375" 6 spline inch male, Extends: 4.625", Length: 7.50", Max HP: 100. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: PA12) $64.58

PTO Adapter - I.D. 1.750 inch 20 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.625 inches, Length: 7.00 inches, Max HP: 100 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103195, Ref: PA14) $50.00

PTO Driveline - Weasler Driveline 14006127ST is designed for fertilizer spreader and general applications., Designed for fertilizer spreader general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 1, Compressed (Closed) Length: 27", Extended Length: 30", Compressed Overall Length: 34.08", Extended Overall Length: 37.08", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, Rated for 15 HP at 540 RPMS and 23 HP at 1000 RPMS, (Item #: 131232) $124.00

PTO Driveline - Weasler Driveline 14006340ST is designed for fertilizer spreader and general applications., Designed for finishing mower general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 3, Compressed (Closed) Length: 31.89", Compressed Overall Length: 39.93", Extended Length: 48.94", Extended Overall Length: 56.98", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, Rated for 29 HP at 540 RPMS and 44 HP at 1000 RPMS, (Item #: 131234) $154.00

PTO Driveline - Weasler Driveline 14006430ST is designed for for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 4, Compressed (Closed) Length: 22.05", Compressed Overall Length: 30.00", Extended Length: 30.28", Extended Overall Length: 40.23", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, Rated for 36 HP at 540 RPMS and 56 HP at 1000 RPMS, (Item #: 131238) $165.98

PTO Driveline - Weasler Driveline 14006432ST is designed designed for rotary cutter general applications�, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 24.02", Compressed Overall Length: 31.97", Extended Length: 35.55", Extended Overall Length: 43.50", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131239) $157.00

PTO Driveline - Weasler Driveline 14006437ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 37.00", Compressed Overall Length: 46.39", Extended Length: 43.67", Extended Overall Length: 53.06", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131241) $170.00

PTO Driveline - Weasler Driveline 14006442ST is designed designed for rotary cutter general applications�, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 33.86", Compressed Overall Length: 41.81", Extended Length: 53.88", Extended Overall Length: 63.27", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round�, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131242) $183.00

PTO Driveline - Weasler Driveline 14006448ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 39.76", Compressed Overall Length: 48.18", Extended Length: 61.81", Extended Overall Length: 70.23", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131243) $169.00

PTO Driveline - Weasler Driveline 14006542ST is designed designed for rotary cutter general applications, Designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 5, Compressed (Closed) Length: 33.86", Compressed Overall Length: 42.44", Extended Length: 51.26", Extended Overall Length: 59.84", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 52, HP@1000RPM: 81, (Item #: 131246) $204.00

PTO Driveline - Weasler Driveline 14006546ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 5, Compressed (Closed) Length: 37.80", Compressed Overall Length: 46.70", Extended Length: 57.83", Extended Overall Length: 63.73", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, HP@540RPM: 52, HP@1000RPM: 81, (Item #: 131248) $202.00

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $52.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $79.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $67.80

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103167, Ref: C690F) $67.80

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 191020, Ref: C680F) $79.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 3/8 inch male, 6-Spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103168, Ref: C660F) $63.00

PTO Overide Clutch - Override coupler for converting 1 1/8 inch female to 1 3/8 inch male, (has 1 1/8 inch female at one end and 1 3/8 inch male at the other end) 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103169, Ref: C670F) $52.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 5/8 inch round bore with keyway. (Item #: 183772, Ref: B6691) $55.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 3/4 inch round bore with 1/4 inch keyway. (Item #: 183766, Ref: B2711) $60.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 7/8 inch round bore with keyway. (Item #: 183768, Ref: B2712) $52.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 1 inch round bore with keyway. (Item #: 183770, Ref: B2713) $45.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 21 spline (standard 1000 RPM PTO) to 3/4 inch round bore with keyway. (Item #: 183763, Ref: B2902) $55.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 21 spline (standard 1000 RPM PTO) to 7/8 inch round bore with keyway. (Item #: 183764, Ref: B2903) $52.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: PTO / Driveline

[Categories] [All 6700 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy