FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 5700 Parts

Category: PTO / Driveline

[Categories] [All 5700 Parts] [All Ford Models]

Brake Band - Brake Band, for PTO Drive Clutch. For tractor models 5000, 5110, 5600, 5610, 5700, 5910, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710. Replaces 47124034, 82003457, 9845550, E0NNB726AA, E0NNB726AB. (Item #: 128506, Ref: E0NNB726AB) $32.00

Clutch Pack Assembly, Independent PTO - Includes 3 Discs and 3 Plates. For tractor models 5000, 7000. Replaces D5NNN751D, D5NNN751A, D3NNN786A, D3NNP743A, D5NNN751B, D3NNN751D, C3NN7D211A, PBB77573A, C0NN7B421A, 83908229, E3NN7R007AA, 373227S. (Item #: 152062, Ref: D5NNN751D) $247.00

Hub - Hub, PTO Drive Clutch, 25 teeth and 52 teeth. For 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710. (Item #: 165269, Ref: F1NNN750AA) $138.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Cap - This PTO Cap is 4 inches long. It will not work on 5 inch PTO shafts. It has 65mm outside threads. It replaces OEM numbers: C5NN726B C5NN726A, SBA378110020, 81801856, 47811118 (Item #: 155020, Ref: C5NN726A) $22.10

PTO Drive Clutch Housing - Is some applications require replacing OE C9NN7R007A with OE D5NN7R007A when used with single speed PTO. Used on 3600, 4600, 5000, 5100, 5110, 5190, 5200, 532, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700. This part replaces Ford New Holland part numbers: D5NNN707A, D5NNN07A, 83903939, 81827131 (Item #: 151874, Ref: D5NNN707A) $259.00

PTO Drive Clutch Hub - For 5700, 5900, 6410, 6810, 7410, 7810, 7910, 8210, (5000, 7000, both 1965 and up with Single/Two Speed), (5600, 5610, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, all with Single/Two Speed). PTO Drive Clutch Hub replaces D2NNN750A. For tractor models with 8 or 10 Plate Independent PTO Clutch. 25 teeth and 52 teeth. (Item #: 165269, Ref: E0NNN750AA) $138.00

PTO Drive Plate - Drive Plate, 15 spline, PTO drive. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 Replaces C5NN777A, C5NNN777A, 81801947 (Item #: 154416, Ref: C5NNN777A) $55.00

PTO Drive Shaft - Shaft, 15/25 teeth, PTO drive. 39.81 inches long. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Replaces 81805444, C5NN7A684A, E1NNN777AB, 83936827. (Item #: 150954, Ref: C5NN7A684AA) $167.00

PTO Drive Shaft - PTO Drive Shaft, 20/25 teeth, 39.870 inches long PTO Drive. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Item #: 115412, Ref: E4NN7A684AA) $200.91

PTO Friction Disc - PTO Friction Disc with Internal Splines, Single-Speed. For tractor models: 5000, 7000 (1965-1975), 5600, 5700, 6600, 6700, 7600, 7700 (1975-1981), 5610, 6610, 6710, 7610, 7710 (single and 2-speed, 1981 and up), 8000 (10/1969-1978), 9000 (1969-1978).D1NNP743A (Item #: 109833, Ref: C9NNP743D) $12.50

PTO Friction Disc - PTO Friction Disc with Internal Splines. Used on PTO with 2-Speed Transmission. For tractor models 5000, 7000 (6/1973-1975), 5600, 5700, 6600, 6700, 7600 (single and 2-speed, 1975-1981). (Item #: 109833, Ref: D3NNP743A) $12.50

PTO Output Cover Gasket - Used on many Ford / New Holland Tractors built 1965 and later. Replaces OEM part numbers C5NN7086A, 81815558 (Item #: 179414, Ref: C5NN7086A) $0.90

PTO Output Shaft Seal - Note that two size seals were used on the output shaft on many of the models listed. Verify measurements or OEM number before ordering. This seal measures 74.62mm inside diameter x 95.24mm outside diameter x 9.5mm wide (3.75 inches x 2.85 inches x 0.375 inches wide). Used on Ford 3600, 4600, 5000, 5100, 5110, 5190, 5200, 532, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8010, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces Ford / New Holland part numbers D9NNN710BB, D9NNN710B, 83944032 (Item #: 189274, Ref: D9NNN710B) $12.10

PTO Output Shaft Seal - Note that two size seals were used on the output shaft on many of the models listed. Verify measurements or OEM number before ordering. This seal measures 74.6mm inside diameter x 95.6 outside diameter x 12.5mm wide (3.75 inches x 2.85 inches x 0.56 inches wide). Used on Ford / New Holland 3600, 4600, 5110, 532, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 6810S, 7010, 7410, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8670, 8670A, 8700, 8730, 8770, 8770A, 8830, 8870, 8870A, 8970, 8970A, 9200, 9700, TS100, TS100 Brazilian, TS110, TS110 Brazilian, TS115, TS120 Brazilian, TS80, TS90, TV140, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 81819768, 83955173, 9823545, 89823545, D9NNN710BC, D9NN710BC (Item #: 128143, Ref: 9823545) $26.80

PTO Piston Return Spring - Replacing Ford / New Holland part numbers 81871420, 83935173, C0NN7C151A, 9823824, D7NNC732A, 81804819, this Spring is used in tractors with independent PTOs. Used on Ford / New Holland models: 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8010, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TS100, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Item #: 124549, Ref: D7NNC732A) $20.40

PTO Shaft - For tractor models (5100, 5200, 7100, 7200, all with 2 Speed after 6/1973), (8000, 9000, both with 2 speed 1968-1978), (5600, 5700, 6600, 6700, 7600, 7700, all with 2 speed after 1975). PTO Shaft 540 RPM. 11.475 inches Long. 36 and 38 tooth splines. (Item #: 109834, Ref: D2NNB728A) $92.00

PTO Shaft - For tractor models (5100, 5200, 7100, 7200, all with 2 speed after 6/1973), (8000, 9000, both with 2 speed 1968-1978), (5600, 5700, 6600, 6700, 7600 both with 2 speed 1975 and later). PTO Shaft 1000 RPM. 11.475 inches long, 38 tooth splines on tractor side, 21 splines on implement side. Replaces D2NNB728B, C7NNB728E, 81827171 (Item #: 110628, Ref: D2NNB728B) $212.00

PTO Shaft, 540 RPM - 1 3/8 inch 6 Spline Shaft, PTO Drive Output, 540 RPM. For tractor models 5000, 5600, 5610S, 5610, 5700, 6600, 6610S, 6610, 6700, 6710, 7000, 7600, 7610S, 7610, 7700, 7710, 7810, 7910, 8210, 8670, TW5, TW15, TW25, TS90, TS100, TS110, TW10, TW20. Replaces E6NN728AA, E6NNB728AA, 9823572, 83959984, 83913106 (Item #: 109919, Ref: E6NNB728AA) $142.00

PTO Shaft, Rear Lower - This PTO shaft measures 12.03 inches in length and has 29 splines. It is for Single-Speed 540 RPM Independent PTO Drive Shaft. Tractors: 5000, 7000 (6/1973-1975), 5600, 5700, 6600, 6700, 7600, 7700 (1975-1981), 5610, 6610, 6710, 7610, 7710 (1981-9/1989), 5610S, 6610S, 7610S (1/1994-12/1994). Replaces D2NNN752B, E3NNN752AA. (Item #: 129295, Ref: E4NNN752AA) $99.00

Spring - Feathering Spring, standard, .165 inch thick. For Independent PTO, 540 RPM single speed or 2 speed 540/1000 RPM. Tractors: 5000, 7000 (1965-1975), 5600, 5700, 6600, 6700, 7600, 7700 (1975-1981), 5610, 6610, 6710, 7610, 7710 (1981-10/1991), 5610S, 6610S, 7610S, 7810S (1/1994 and up). (Item #: 172542, Ref: D3NNP733A) $22.70

Universal Parts and Accessories
Category: PTO / Driveline

Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124837, Ref: AB4111WY138) $122.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

Overrun Coupler with Quick Release - This Overrun Coupler features a Quick Release. It fits applications needing a male and female end of 6 splines and 1 3/8 inches. Rated up to 70 horsepower. (Item #: 182532, Ref: S.23639) $56.00

PTO Adapter - I.D. 1.125 inch 6 spline Female to O.D. 1.375 inch 6 spline Male, ExtendsL 1.125 inches, Length: 3 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103190, Ref: PA01) $10.88

PTO Adapter - Inside diameter 1.375 inch 21 spline female to outside diameter 1.375 inch 6 spline male. Extends: 4.125 inch, length: 6.375 inch. Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103188, Ref: PA08) $30.48

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends: 4.125 inches, Length: 6.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103187, Ref: PA09) $70.00

PTO Adapter - Extends and increases: 1 1/8" female 6 spline to 1 3/8" male 6 spline. 4-5/8" length. Extends PTO 2-3/4" . Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". Also Replaces T353F. (Item #: 103191, Ref: PA04) $21.00

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.125 inch 6 spline male, Extends: 2.750 inches, Length: 5.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103192, Ref: PA05) $20.00

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends PTO Shaft 4.00 inches, Length: 5.75 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 121311, Ref: PA06) $26.00

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.125 inches, Length: 5.875 inches, Max HP: 70 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 152729, Ref: PA11) $39.70

PTO Adapter - I.D. 1.750" 20 spline female to O.D. 1.375" 6 spline inch male, Extends: 4.625", Length: 7.50", Max HP: 100. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: PA12) $64.58

PTO Adapter - I.D. 1.750 inch 20 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.625 inches, Length: 7.00 inches, Max HP: 100 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103195, Ref: PA14) $50.00

PTO Driveline - Weasler Driveline 14006127ST is designed for fertilizer spreader and general applications., Designed for fertilizer spreader general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 1, Compressed (Closed) Length: 27", Extended Length: 30", Compressed Overall Length: 34.08", Extended Overall Length: 37.08", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, Rated for 15 HP at 540 RPMS and 23 HP at 1000 RPMS, (Item #: 131232) $124.00

PTO Driveline - Weasler Driveline 14006340ST is designed for fertilizer spreader and general applications., Designed for finishing mower general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 3, Compressed (Closed) Length: 31.89", Compressed Overall Length: 39.93", Extended Length: 48.94", Extended Overall Length: 56.98", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, Rated for 29 HP at 540 RPMS and 44 HP at 1000 RPMS, (Item #: 131234) $154.00

PTO Driveline - Weasler Driveline 14006430ST is designed for for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 4, Compressed (Closed) Length: 22.05", Compressed Overall Length: 30.00", Extended Length: 30.28", Extended Overall Length: 40.23", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, Rated for 36 HP at 540 RPMS and 56 HP at 1000 RPMS, (Item #: 131238) $165.98

PTO Driveline - Weasler Driveline 14006432ST is designed designed for rotary cutter general applications�, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 24.02", Compressed Overall Length: 31.97", Extended Length: 35.55", Extended Overall Length: 43.50", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131239) $157.00

PTO Driveline - Weasler Driveline 14006437ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 37.00", Compressed Overall Length: 46.39", Extended Length: 43.67", Extended Overall Length: 53.06", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131241) $170.00

PTO Driveline - Weasler Driveline 14006442ST is designed designed for rotary cutter general applications�, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 33.86", Compressed Overall Length: 41.81", Extended Length: 53.88", Extended Overall Length: 63.27", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round�, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131242) $183.00

PTO Driveline - Weasler Driveline 14006448ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 39.76", Compressed Overall Length: 48.18", Extended Length: 61.81", Extended Overall Length: 70.23", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131243) $169.00

PTO Driveline - Weasler Driveline 14006542ST is designed designed for rotary cutter general applications, Designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 5, Compressed (Closed) Length: 33.86", Compressed Overall Length: 42.44", Extended Length: 51.26", Extended Overall Length: 59.84", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 52, HP@1000RPM: 81, (Item #: 131246) $204.00

PTO Driveline - Weasler Driveline 14006546ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 5, Compressed (Closed) Length: 37.80", Compressed Overall Length: 46.70", Extended Length: 57.83", Extended Overall Length: 63.73", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, HP@540RPM: 52, HP@1000RPM: 81, (Item #: 131248) $202.00

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $52.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $79.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $67.80

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103167, Ref: C690F) $67.80

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 191020, Ref: C680F) $79.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 3/8 inch male, 6-Spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103168, Ref: C660F) $63.00

PTO Overide Clutch - Override coupler for converting 1 1/8 inch female to 1 3/8 inch male, (has 1 1/8 inch female at one end and 1 3/8 inch male at the other end) 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103169, Ref: C670F) $52.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 5/8 inch round bore with keyway. (Item #: 183772, Ref: B6691) $55.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 3/4 inch round bore with 1/4 inch keyway. (Item #: 183766, Ref: B2711) $60.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 7/8 inch round bore with keyway. (Item #: 183768, Ref: B2712) $52.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 1 inch round bore with keyway. (Item #: 183770, Ref: B2713) $45.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 21 spline (standard 1000 RPM PTO) to 3/4 inch round bore with keyway. (Item #: 183763, Ref: B2902) $55.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 21 spline (standard 1000 RPM PTO) to 7/8 inch round bore with keyway. (Item #: 183764, Ref: B2903) $52.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: PTO / Driveline

[Categories] [All 5700 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy