FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 3400 Parts

Category: Drive Train

[Categories] [All 3400 Parts] [All Ford Models]

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $19.30

Bearing Retainer Gasket - This Bearing Retainer Gasket (Shim) is used on Ford New Holland tractors 1965 and later: 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 234, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 3400, 3500, 3600, 3610, 4000, 4110, 4110LCG, 531. Replaces D1NN4229A, 81825098 (Item #: 182922, Ref: D1NN4229A) $42.60

Bearing, Main Input Shaft - Measures 40mm inside diameter, 90mm outside diameter, 23mm wide. Replaces 20943310, 63082RS, 6308, 86511837, 81805130, 81808853, C5NN7A452A, N115069A, 391068X1 (Item #: 183460, Ref: C5NN7A452A) $19.00

Center Housing Gasket - Used on the following, all built 1965 or later: 2000, 2110LCG, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 333, 335, 340, 3400, 340A, 340B, 3500, 3600, 3610, 3900, 4000, 4100, 4110, 4110LCG, 445, 450, 4600, 4610, 515, 530A, 531, 532, 535, 540, 540A, 545, 550, 555, 555A, 555B, 655, 655A. Replaces D4NN4N507A, C5NN4N507A, 86569738 (Item #: 179412, Ref: D4NN4N507A) $14.40

Countershaft - Hollow for tractor models with 6 speed and Trans PTO: 2000, 3000, 2600, 3600, 231, 233, 335, 2110, 3400, 3500, 4500. (Item #: C5NN7111B) $188.87

Countershaft Gear - Replacing Ford / New Holland part numbers 81804753, C5NN7113B, 81869991, this Transmission Countershaft Gear has 16 and 35 teeth. It is used on Ford models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 260C, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5100, 515, 5200, 530, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 7000, 7100, 7200 (Item #: 172893, Ref: C5NN7113B) $383.00

Coupling, Counter Shaft Sliding Gear - 21 teeth, 16 spline. For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5610S, 5640, 5700, 5900, 655, 655A, 6600, 6610, 6610S, 6640, 6700, 6710, 7010, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810S, 7840, 8010, 8240, TS100, TS90 all with 8 speed transmission. Replaces C5NN7106B, C7NN7106E, C5NN7102F, D2NN7106B, C5NN7106D, 81819184, 81826589, 81823632, 81813478, E0NN7106BA, 83934545 (Item #: 170135, Ref: E0NN7106BA) $65.00

Cover - Cover Assembly, transmission case. For tractor models 2000 3 Cyl Tractor, 2150, 2300, 2310, 3000, 3055, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550 Indust/Const, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 4500 Indust/Const, 5000, 5190, 5340 (Item #: 119858, Ref: C5NN7211F) $13.98

Deep Groove Ball Bearing Single Row - This bearing measures 50mm inside diameter, 90mm outside diameter, 20mm wide. It is used as PTO Input Shaft Bearing with live PTO. It also has other applications. Confirm by OEM part numbers. Replaces: 6210, 26794660, C5NN7N166B, C0NN7C246B, N115069B, 81854759, 83908455, 84330059, 255090201, 8101-06210, 391162X1, 24101-62104, 971041, 979537, 971129 (Item #: 177372, Ref: C5NN7N166B) $24.50

Gear 1st and 5th - Gear has 49 and 28 teeth. Verify tooth count. C5NN7N100A was used to describe two different parts. If you a gear with 46 and 28 teeth, use E6NN7N100AA. Replaces (Item #: 166004, Ref: C5NN7N100A) $24.60

Gear Shift Boot - This Gear Shift Boot can be used on multiple Ford/New Holland Tractors built 1965 and later. The top holes is 5/8 inch and the bottom hole is 2 1/2 inches. It replaces original part numbers C5NN27534, C5NN275394, C5NN7277D, D4NN7N309A, 82007346. (Item #: 164365, Ref: C5NN27534) $3.70

Gear Shift Coupler, Rear - 28 teeth, 20 spline. For tractor models 2600, 2610, 2810, 2910, 3100, 340, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4600, 4610, 5100, 5110, 5200, 5610, 5640, 5900, 6410, 6600, 6610, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710, 7740. Replaces D6NN7N072B, E6NN7N072BA. (Item #: 167824, Ref: 82983825) $91.00

Gear Shift Knob - This Gear Shift Knob fits 5/16 inch x 24 thread and approx. 1.299 inch diameter. It replaces original part numbers E440GB9, 81800669 (Item #: 121228, Ref: E440GB9) $2.90

Gear Shift Lever, with Knob, 4-Speed Transmission - This gear shift lever with knob replaces NAA7209A and 8N7209C shift levers. This newer version has 5/16 inch UNF thread for the shift knob (knob included). The early series 3/8 inch knob thread shaft is no longer available. Note: use gear shift knob C5NN7213A (included) if you need a replacement. This gear shift lever fits tractor with single lever 4 speed or torque converter transmission: 2000, 2110LCG, 3000, 340, 3400, 340A, 3500, 3550, 4000, 420, 445, 4500, 532, 535, 540, 540A, 545, 5500, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Jubilee, NAA (Item #: 110007, Ref: C5NN7202B) $94.32

Gear Shift, Rail - High/Low. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 340B, 3430, 345D, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5030. (Item #: 172806, Ref: C5NN7240AD) $56.00

Gear, 1st - 49/28 teeth, 1.775 inch inside diameter, 7.125 inch outside diameter. For tractor models 2000, 2110, 2120, 2300, 2310, 2600, 3000, 3055, 3330, 3400, 3500, 3600, 4000, 4110, 4140, 4330, 4340, 4400, 4410, 4500. (Item #: 172470, Ref: C5NN7100A) $218.91

Gear, 1st - 46/28 tooth. For tractor models 2100, 2600, 2610, 2810, 2910, 3055, 3100, 3400, 3550, 3600, 3610, 3900, 3910, 4100, 4110, 4140, 4410, 4500, 4600, 4610, 5100, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N100A, E6NN7N100AA, C5NN7N100C, 81813521, 83960019 (Item #: 165999, Ref: 83960019) $113.00

Gear, 1st, 4 Speed Transmission - This transmission gear is the 1st gear, in the 4 speed transmission. It is 60/28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Item #: 165266, Ref: 8N7100) $301.00

Gear, 2nd and 5th - 41/28 Tooth, 1.775 inch inside diameter, 6.125 inch outside diameter. For tractor models 2000, 2110LCG, 231, 233, 2600, 3000, 335, 3400, 3500, 3600, 4110LCG, 4400, 4500, 531, Dexta, Super Dexta. All with 6 speed transmissions. Replaces 957E7101B (Item #: 100024, Ref: 957E7101B) $109.00

Gear, 3rd, 4 Speed Transmission - This transmission gear is the 3rd gear in the 4 speed transmission. It is a 52 tooth gear. For tractor models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB. All with 4 speed transmissions. (Item #: 172982, Ref: 8N7102) $257.00

Gear, Mainshaft 2nd - This transmission mainshaft 2nd Gear has 56 teeth. For NAA, Jubilee, all 4-Speed Ford Transmissions (1955-1964), 8N, 4-Speed Transmission, 1948-1952. (Item #: 108536, Ref: B9NN7A381B) $145.00

Gear, Reverse - 28/32 tooth, 1.800 inch inside diameter, 4.800 inch outside diameter. Replaces C5NN7N012B. For tractor models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, 83963585, E2NN7N012AA, E6NN7N012AA, 81872311, 83960462, 81813476 (Item #: 170396, Ref: E6NN7N012AA) $215.72

Gear, Reverse - 28/32 tooth, 1.800 inch inside diameter, 4.800 inch outside diameter. For tractor models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, E6NN7N012AA. (Item #: 170396, Ref: 83960462) $215.72

Gear, Reverse - With 30 Teeth. It replaces part numbers C5NN7K013A, 81813563 (Item #: 165622, Ref: C5NN7K013A) $50.98

Gear, Secondary Output Shaft - 45 big teeth, 28 small teeth. For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 2600, 3000, 3055, 3100, 3330, 335, 3400, 3500, 3600, 4000, 4100, 4110LCG, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 531, Dexta, Super Dexta. Replaces E49GA9 (Item #: 178386, Ref: E49GA9) $122.00

Hi-Low Shift Lever - For Ford tractor models 2000, 2100, 2110, 2120, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5190, 5200, 5340, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345D, 420, 445, 445A, 445D, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545D, Replaces Ford OEM number C5NN7210D, 81804870, C7NN7210A, 81818563, C7NN7210AC, (Item #: 170011) $46.90

No
Picture
Idler Gear Shaft - For Ford tractor models 2000, 3000, 3400, 3500, 4000, 4400, 4500, Replaces Ford OEM number C5NN872A, (Item #: 167631) $27.90

Input Drive Shaft - This Input Drive Shaft is used on 4 speed transmissions. It has 15 Splines, 20 Teeth and it 22.62 Long. Used on 2000, 3000, 3400, 3500. Replaces original part number C5NN7017B (Item #: 179304, Ref: C5NN7017B) $393.61

Input Drive Shaft - This Input Drive Shaft is 17.66 inches long, has 10 splines and 19 teeth. Replaces original part numbers C5NN7017AC, C7NN7017AB, 81813988, 81820864 (Item #: 166070, Ref: C7NN7017AB) $77.00

Input Shaft - This Input Shaft is used on Step Up Step Down Transmissions. It is 9 inches in length. Used in the following tractors, 1965 and later: 2000, 3000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 3400, 3500. Replaces C5NN7015T. (Item #: 179307, Ref: C5NN7015T) $227.00

Input Shaft Tube - The Input Shaft Tube is used on 4 Speed transmissions on 3 cylinder; 2000, 3000, 3400, 3500. Replaces C5NN7A284B (Item #: 178910, Ref: C5NN7A284B) $249.87

Main Shaft Pilot Needle Bearing - This Main Shaft Pilot Needle Bearing is used on 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3600, 3610, 530A, 531, Super Dexta. Measures 0.9973 inches inside diameter x 1.3735 inches outside diameter x 0.875 inches wide. Replaces 960E7120, C5NN7120B, 81821350, C9NN7120A (Item #: 182990, Ref: C5NN7120B) $47.30

Mainshaft Front Bearing - Measuring 30mm inside diameter, 72mm outside diameter, and 20.75mm wide, this bearing replaces OEM numbers D0NNN755B, 46805, 26800340. It is used on Ford models 2000, 2100, 2110, 2600, 2600N, 2600V, 2810, 2910, 3000, 3100, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3900, 3910, 3910N, 3910V, 4000, 4100, 4110, 4110N, 4110V, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 5000, 5100, 515, 5200, 532, 5340, 535, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700 (Item #: 182968, Ref: D0NNN755B) $25.70

Mainshaft, Transmission - This transmission main shaft has 17 teeth, 15 splines and is 17.675 inches long. Replaces C5NN7017H, 81804588. (Item #: 180327, Ref: C5NN7017H) $140.42

Mainshaft, Transmission, Rear - 30 teeth, 17 and 28 splines. For tractor models (2000, 3000, 3600, 3610 all with 8 speed transmission.) Replaces C5NN7C095D, 81804717 (Item #: 166035, Ref: C5NN7C095D) $34.10

Oil Filler Plug - For transmission and rear end. For tractor models 2000 3 cylinder, 231, 233, 234, 2600V, 333, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 2100, 2110, 2120, 2150, 2300, 2600, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3900, 4000 3 cylinder, 4100, 4110, 4140, 4190, 4200, 4300, 4340, 4400, 4410, 4500, 4600, Dexta, Power Major, Super Dexta, Super Major. Please verify the thread size before ordering. This plug measures 1-5/8 inch x 12 thread. Does not come with gasket. Use NAA9160A for gasket. (Item #: 113703, Ref: 957E7010) $15.10

Oil Seal, Secondary Output Shaft - For tractor models 2000, 2600, 3000, 3600, 4000 all with 6 Speed Transmission, Dexta, Super Dexta. Measures 83mm outside diameter x 46mm inside diameter x 14.8mm width. Replaces E42GA9, 81717023 (Item #: 176493, Ref: E42GA9) $7.70

Output Shaft Bearing - Measures 41.3mm inside diameter, 73.4mm outside diameter and 19.8mm wide. Replaces: LM501349/501310, 663558R1, 81277C1, 81278C1, GHB142, 663557R91, 86512015, 5132342, 4999261, WAA4221A, 860270, 860297, WAA4222A, WAA4220A, 05132342, 67370, 67371, 644321, 81803417, 860299, 860301, 860302, 860304, 81803412, 860295, 86512015, 5132342, 83992412, 81854761, 81854361, JD8237, JD8902, 663556R91, 663558R1, 86512015, 663557R91, 109706396, GHB142, MBU1044, 113571M1 (Item #: 150013, Ref: 86512015) $14.60

Output Shaft Bearing Set - Contains C5NN7N041A Cup and C5NN7N042A Cone. These were used on 8 Speed Transmission, 1/1965 - 4/1971. Replaces C5NN7N041A, C5NN7N042A, 86611047, 81804630. (Item #: 150013, Ref: C5NN7N041A) $14.60

Output Shaft Gear - Gear has 28 and 49 Teeth. It is used an many Ford / New Holland Models with 8 speed and 6x4 Manual Reversing Transmissions. Replaces OEM part numbers C5NN7145A, 83960022, E6NN7145BA, 81804812, E6NN7145AA (Item #: 165990, Ref: E6NN7145AA) $358.00

Output Shaft Pilot Bearing - Measures 25mm inside diameter, 52mm outside diameter, 16.25mm wide. It replaces: E76GA9, C5NN7N014A, 86705858, C5NN7N047A, C5NN7N044A, 83990517, 81804636, 81804637, C5NN7N048A, F718701030030, 339482X1, 3010151X91, 194145-11910, 971326, 30205, 30205M-TIM, 30205M (Item #: 185088, Ref: C5NN7N014A) $16.20

PTO Input Bearing Retainer Seal - The Seal Measures Oil seal, 1.878 inches inside diameter, 3.130 inches outside diameter, 0.5000 inches wide. It replaces OEM numbers E59GE9, 83924923, D9NNC729BA, 87712923 (Item #: 172919, Ref: D9NNC729BA) $7.50

PTO Input Housing Gasket - Used on many Ford / New Holland tractors, 1965 and later. It replaces OEM part numbers 81804647, 81804648, 83959976, C5NN7N051A, C5NN7N051B, E7NN7N051AA (Item #: 179416, Ref: C5NN7N051B) $1.00

Rear Axle - This is a Collar Type Rear Axle used on the following 1965 or later: 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 234, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 3400, 3500, 3610, 4000, 4110, 4110LCG, 531. Additional $10 shipping due to size and weight. Replaces D7NN4244A, C5NN4244A, 83912192 (Item #: 182961, Ref: C5NN4244A) $281.00

Rear Axle Inner Seal - This inner rear axle seal is for tractor models 2000, 2600, 2610, 3000, 3400, 3600, 3610. (Item #: 150690, Ref: C9NN4N109A) $4.90

Rear Axle Outer Seal - For tractor models 2000, 2600, 2610, 3000, 3400, 3600, 3610. Replaces C5NN4115B, 86531999, 81803352 (Item #: 126932, Ref: C5NN4115B) $6.60

Secondary Output Shaft Bearing - This Secondary Output Shaft Bearing measures 1.5000 inches inside diameter, 3.2500 inches outside diameter, 0.7500 inches width. Replaces original part numbers E53GA9, 81800632, SKF RLS 12 (Item #: 180301, Ref: E53GA9) $52.00

Select-O-Speed Control Selector Cover - Fits Select-o-Speed Tractors: 1959 and later. Replaces original part numbers 313936, 81814248, C5NN7N013A. For models 1811, 1871, 1881, 2000, 2110, 3000, 3100, 3400, 3500, 4000, 4100, 4110, 4200, 4400, 4500, 5000, 5100, 5200, 611, 671, 681, 771, 811, 871, 881, 971 and 981. (Item #: 115056, Ref: C5NN7N013A) $58.00

Shift Cover Gasket - This Transmission Shift Cover Gasket is used on multiple Ford Tractors, 1965 an later with 6, 7 or 8 speed transmissions. It replaces original part numbers 82004680, 83959206, C5NN7N225C, D5NN7223B, D8NN7223AA, E6NN7223AA, E8NN7223AA. (Item #: 125339, Ref: C5NN7N225A) $4.40

Shift Knob - For tractor models Dexta, Super Dexta, (Major from 8/1958 up to 1964) 2100, 2600, 2610, 3000, 3100, 3120, 3400, 3600, 3610, 4000, 4110, 4140, 4400, 4410, 4500, 4600, 4610, 5000, 5110, 5200, 5600, 5610, 5640, 5900, 6410, 6600, 6610, 6810, 7100, 7200, 7600, 7610, 7740. 5/16 Inch - 24 UNF Thread. 81804882, 957E7213, NAA7209A Note, this part may arrive spherical as shown, or more flattened like BB7213A. This part is differentiated by 5/16 Inch - 24 UNF Thread. (Item #: 116912, Ref: C5NN7213A) $6.30

Shifter Assembly, Cast Iron - For tractor models with 6, 7 and 8 speed transmissions from 10/1966 to 1975. Complete Shift Cover Assembly includes cover, shifter boots. DOES NOT INCLUDE GASKET, KNOBS BOOTS OR PLUGS. We do not have plugs available. Order C5NN7N225A gasket if needed. Replaces: Levers: C5NN7210D, C5NN7210V, Cover only: 81814737, C5NN7211F, C5NN7222L, C5NN7211E. (Item #: 184788, Ref: C5NN7211E) $115.00

Shifter Assembly, Stamped Steel - For tractor models with 6, 7 and 8 speed transmission from 10/1966. Complete Shift Cover Assembly includes cover, levers, shifter knobs, shifter boots. DOES NOT INCLUDE GASKET. Order C5NN7N225A Gasket if needed. Replaces: Levers: C5NN7210D, C5NN7210V, Cover only: 81814737, C5NN7211F, C5NN7222L, C5NN7211E. (Item #: 125338, Ref: S.66211-LG) $78.00

Sliding Coupling - This Sliding Coupling is used in Ford tractors 1965 and later with 6 speed transmission. Replaces C5NN7106A, 81804736 (Item #: C5NN7106A) $47.98

Transmission Bearing - Main Pilot Shaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, Jubilee, NAB. (Item #: 118284, Ref: 9N7120) $97.00

Transmission Gasket Set - Transmission Gasket Set for 3 cylinder Fords, 1965 and up with 6 or 8 speed Non-Synchro Transmissions. (Item #: 178201, Ref: S.65396) $28.80

Transmission Output Shaft Seal - Measures 39.4mm inside diameter x 60.3mm outside diameter x 12.7mm wide. It replaces C5NN77086A, 81808572, D66412, D40772, 363514R93, 70800166, ATY3988, ATY4067, AM848T, AP19243H, ATY4124, 1860325M1, 195506M1, 1077452M1 (Item #: 155727, Ref: C5NN77086A) $5.90

Transmission Rear Coupling - This a a paired set used on many Ford New Holland Models. Replaces OEM part numbers 83908698, 82983825, 83960027, E6NN7N072BA, D6NN7N072B (Item #: 167824, Ref: E6NN7N072BA) $91.00

Universal Parts and Accessories
Category: Drive Train

Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Item #: 108599, Ref: LU10088) $11.10

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $6.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Drive Train

[Categories] [All 3400 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy