FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 1206 Parts

Category: Steering

[Categories] [All 1206 Parts] [All Farmall Models]

Axle Center Tube - For all models listed with factory IH wide front with tie rods behind center tube: H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, 1026, 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 666, 706, 756, 806, 826, 856 Axle Center Tube with bushings (48841D) is 42 1/2 inches long and 4 1/2 inches in diameter. Replaces: 358976R31, 383926R21, Bushing: 48841D (Item #: 109489, Ref: 358976R31) $450.00

Axle Clamp, Front, Used - For International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, MTA, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM nos 350556R1, Front Axle Clamp, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434540) $31.01

Axle Pivot Ball - Thread is 3/4 inch diameter, 16 thread. Ball is 1.75 inches in diameter. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 544, 560, 656, 666, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 70, (66 series with block type power steering cylinder end (late with axle pivot ball, NOT pin), (86, 88 series with axle pivot ball NOT pin). (Item #: 108885, Ref: 65320C3) $21.70

Bolster Pivot Pin - 1 1/4 inch diameter, 8 1/2 inches long. If you need a 1 1/2 inch Diameter Pin, order 379941R1. For tractor models H, Hydro 70, M, MD, MTA, Super H, Super M, 1206, 1256, 400, 450, 460, 544, 560, 656, 666, 686, 706, 756, 806, 826, 856. Replaces 358978R1, 358978R2 (Item #: 109487, Ref: 358978R2) $27.70

Bull Pinion and Brake Shaft, Used - For International tractor models 1066 (Gear Drive), 1206, 1256, 4366, 4386, 21206, 21256, Replaces International OEM nos 391690R1, 70680C1, With out Differential Lock, Splines: 12 - 13 - 14, Solid Center, Overall Length: 13.75�, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499802) $140.01

Differential Assembly, Used - For International tractor models 1066 (s/n 22999-earlier), 1206, 1256, 21206, 21256, Replaces International OEM nos 391681R91, Consist of Case 380188R2 and Case 391682R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499803) $590.01

Front Axle Clamp Pin - For International / Farmall tractor models H, HV, Hydro 70, Hydro 100, Hydro 186, M, MD, Super H, Super M, 300, 350, 400 (FARMALL), 450, 460, 544, 560, 656, 660, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, Compatible with International Construction and industrial models 21206, 21256, Replaces Case IH OEM number 350557R1, 0.739" Dia., 6.616" Long, 1.125" Head, For applications with steel center axle tube, but depending on the model it can be used on standard and high center front axle., With adjustable wide front axle, (Item #: 158235) $12.10

Jam Nut - For the following tractors: Hydro 100, Hydro 185, Hydro 70, 1026, 1066, 1086, 1206, 1256, 1466, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 460, 544, 560, 660, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 2WD STD AXLE: 5088, 5288, 5488. Replaces 374062R1 (Item #: 105244, Ref: 192928M1) $9.00

Knee Extension - With bushings 3 7/8 inch diameter. For 460, 544, 560, 660, 666, 686, 706, 806, 1206, 1256, Hydro 70. 370689R21 (Item #: 110386, Ref: R2953) $231.00

Pivot Bolster - For tractor models 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 1026, 1206, 1256, Hydro 70. Pivot Bolster. (0011R) (Item #: 109484, Ref: 383909R4) $318.54

Pivot Bolster Pin - 1 1/2 inch diameter, 8 1/2 inches long. For 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 1026, 1206, 1256, Hydro 70. Pivot Bolster Pin. (2961R) (Item #: 173188, Ref: 379941R1) $64.00

Pivot Pin Retaining Pin - For International / Farmall tractor models Hydro 70, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, Replaces International OEM number 251105R1, Dimensions: 3/8" x 4 7/8", (Item #: 170357) $4.30

RV Pivot Arm Kit - Pivot arm kit, contains 380312R13 reverse pilot arm and 380115R2 roller. 06 Series tractor models: 706, 806, 1206, (1963 to 1967). For 1206, 706, 806. (Item #: 111423, Ref: 380312KIT) $74.00

Rear Housing Overhaul Gasket Set - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388 (s/n 10490-earlier, Does not include Pump drive Housing Gasket), 3588 (s/n 130114-earlier, Does not include Pump Drive Housing Gasket), 3788 (s/n 9786-earlier, Does not include Pump Drive Housing Gasket), Replaces International OEM number 386683R96, (Item #: 168749) $190.00

No
Picture
Ring Gear and Pinion Kit - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3088, 3288, 3388, 3488, 3588, 3688, 6388, 6588, Replaces International OEM number 135770C2, 528684R91, 528707R93, 395828R1, Kit Includes: Ring Gear and Pinion, Lock Plate, Nut, Shim (.004"), (2) Shims (.007"), and Bearing and Retainer Assembly, For Bearing and Retainer Kit use Item #: 160584, (Item #: 177076) $2299.01

Shaft, Cam Pivot - Cam pivot shaft. For tractor models 706, 806, 1206, (1963 to 1967). (Item #: 111209, Ref: 391018R21) $24.20

Spindle - Left Hand, Used - For International tractor models 544 (with heavy duty steering knuckles), 560, 656 (with heavy duty steering knuckles), 706, 756, 806, 826, 856, 1026, 1206, 1256, Replaces International OEM number 383912R92, 370791R91, Left Side, Dimension A: 12.375", Dimension B: 1.667", Dimension C: 1.780", Dimension D: 1.375", For a new version of this item use Item #: 100843, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400843) $105.01

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.80

Spindle Bushing Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 186, 404, 424, 444, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 786, 806, 826, 856, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 358958R2, 185106C1, 15943DA, (4) 358958R2 Bushings: 1-43/64" x 1-7/8" x 2", (2) 185106C1 Thrust Bearings: 1-3/4" ID x 2-3/4" OD, (2) 15943DA Dust Seals: 2-3/8" x 3" x 1/4", For Bushing use Item #: 102176, (Item #: 104350) $64.00

No
Picture
Spindle Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Replaces International OEM number 427546, 1-3/8"-12, (Item #: 100852) $4.00

Spindle, LH - This spindle measures A= 12.375 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 1026, 1206, 1256, 560, 656, 706, 756, 806, 826, 856. The wheel bearing kit used for this spindle is part number FW120FS. (Item #: 100843, Ref: 383912R92) $156.00

Spindle, RH - This spindle measures A= 12.375 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 1026, 1206, 1256, 560, 656, 706, 756, 806, 826, 856. The wheel bearing kit used for this spindle is part number FW120FS. (Item #: 100842, Ref: 383913R92) $207.00

Stay Rod Assembly - Stay Rod Assembly "Wishbone" fits wide front end tractors. For tractor models 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, H, Hydro 70, M, Super H, Super M, Super MD. Replaces 10546D, 360405R11 VERIFY PART NUMBER IN PARTS MANUAL FOR YOUR TRACTOR. (Item #: 167990, Ref: 360405R11) $500.00

Stay Rod Assembly, Used - For International tractor models H, HV, M, MD, Super H (s/n 19234-later), Super M (s/n 60001-later), 300, 350, 400, 450, 460, 544, 560, 656, 660, 706, 756, 806, 826, 856, 1026, 1206, 1256, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 360405R11, Wishbone, Adjustable Wide Front Axle, For a new version of this item use Item #: 167990, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429882) $325.01

Stay Rod Cap - For tractor models 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 856, Hydro 70. (Item #: 108884, Ref: 60763DB) $15.00

No
Picture
Stay Rod Cap Shim - For Hydro 70, 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 856. (Item #: 111364, Ref: 60762D) $4.80

Stay Rod Cap, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 379953R1, 2 Bolt, For a new version of this item use Item #: 110265, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410265) $8.51

Stay Rod Socket - For tractor models 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 826, 856, Hydro 70. (Item #: 108814, Ref: 535861R1) $27.30

Steering Arm - Center For 544, 560, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256 (Item #: 100881, Ref: 358970R1) $95.00

Steering Arm - Left or right hand - keyed. For tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Item #: 100884, Ref: R2949) $114.00

No
Picture
Steering Arm - Left hand - 2 inch diameter splined. For tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Item #: 100886, Ref: R0264) $167.00

Steering Arm - Right hand - 2 spline. For tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Item #: 100885, Ref: R0265) $182.00

No
Picture
Steering Pilot Valve, Used - For International tractor models 504, 606, 656, 706, 806, 1206, 2504, 2606, 2656, 2706, 2806, Compatible with International Combine(s) 403, Compatible with International Hay Cutting(s) 375, Replaces International OEM nos 379645R93, 379645R91, 379645R92, 534502R91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438492) $153.01

Steering Wheel - 16 inch diameter. Mounts on 13/16 inch (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. (Item #: 101432, Ref: 385156R1) $52.00

Steering Wheel - Tilt type 36 spline, 7/8 inch shaft, 3 covered spokes. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. Uses cap 400220R1. (Item #: 122473, Ref: 400217R1) $92.00

Steering Wheel Boot - Rubber cover for Orbit Motor. For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 4156, 4166, 4186, Hydro 70, Hydro 86, Hydro 100. Replaces IHS682. (Item #: 126655, Ref: 382587R1) $17.20

Steering Wheel Cap - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 108550, Ref: 68837C3) $8.40

Steering Wheel Cap - For Models with Power Steering. Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101433, Ref: 366566R1) $63.00

Steering Wheel Cap - Use with steering wheel 400217R1. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. Gasket available as p/n 402434R1. (Item #: 124179, Ref: 400220R1) $114.30

Steering Wheel Cap Gasket - Use with steering wheel cap 400220R1. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 109446, Ref: 402434R1) $12.00

Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101434, Ref: 366558R1) $70.00

Steering Wheel Cover, Tilt - Made of plastic. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 179248, Ref: 400213R1) $75.01

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

No
Picture
Steering Wheel Release Lever Knob - Use with 400214R21 release lever. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 180477, Ref: R5148) $15.00

No
Picture
Steering Wheel Release Lever, Tilt - For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 179955, Ref: 400214R21) $16.67

Taper Lock Snap Ring - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128038) $2.70

Taper Lock Washer - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128039) $4.10

Taper Lok Nut - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128037) $5.00

Taper-Lok Assembly Set of 2 - The two Taper-Lok spindles measure 12.875 inches shaft, 1.667 inches shaft diameter, 1.780 inches inner bearing, 1.375 inches outer bearing, and a Spline Count of 17. This is a set of TAPER-LOK Spindles, 1 left hand steering arm, 1 right had steering arm, snap rings, nuts, and washers. If wheel bearings are needed, order FW120FS, (Item #: 111392, Ref: 71785TLS) $555.00

Thrust Bearing - Fits Models: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 1822, 1844, 2022, 2044, 21026, 2400A, 2500A, 2656, 2706, 2756, 2826, 2856, 300, 3088, 3288, 350, 3688, 380B, 385, 395, 400, 450, 454, 484, 485, 495, 504, 5088, 5288, 544, 5488, 560, 574, 584, 585, 595, 595XL, 656, 66, 666, 674 with STRAIGHT AXLE. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $13.10

Tie Rod Assembly - Complete assembly contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. Fits HYDRO 100, HYDRO 186, HYDRO 70, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1568, 1586, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986. Fits Factory International wide front axles only. Will not fit Schwartz, Speeco, Norden or other aftermarket wide front axles. (Item #: 100869, Ref: 223313) $85.00

Tie Rod Clamp - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 359986R1, (Item #: 104414) $3.20

No
Picture
Tie Rod End, Inner - Left Hand - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 384005R91, 3.75" Long, 1" Diameter, 16 Left Hand Thread, (Item #: 100873) $19.00

Tie Rod Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 374062R1, 1.000" - 16 RH thread, (Item #: 104411) $8.20

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 1206 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy