FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers WD Parts

Category: Steering

[Categories] [All WD Parts] [All Allis Chalmers Models]

Seal, Power Steering Pump Driveshaft - For tractor models D10, D12, D14, D15, D17, WD, WD45. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.30

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Used on Allis Chalmers D14, D15, D17, D19, RC when using later style steering joint # 224825, WC when using later style steering joint # 224825, WD, WD45 Diesel, WF when using later style steering joint # 224825. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.60

Steering Wheel - Steering wheel, 3 spoke. 18 inch diameter, 7/8 inch shaft. Round hub with pinhole. For tractor models WC, WD, WD45, (D14 serial number 19001 and up), (D17 serial number 24001 and up). Replaces: 70229677, 70202260, 229677, 202260. (Item #: 101404, Ref: 70229677) $49.40

Steering Wheel - For WD, WD45, Styled, WC, Early D14, This steering wheel is for tractor models D15, and D17 with 18 inch diameter, 7/8 inch Smooth Hub with pin hole. Replaces OEM numbers V2260 and 202260. (Item #: 101404, Ref: 202260) $49.40

Tie Rod Assembly - Consists of OEM part numbers 70250140 and 70250141. Replaces: 249418, 225280, 225279, 254662, 254661. For (D14, D15, D17, D19, WD, WD45 Fits these models if cut to length), (170, 175, 180, 185, 190XT, 200 fits these models with standard front end). (Item #: 100082, Ref: 70254660) $57.00

Tie Rod End, Female - 17.500 inches long. For tractor models 180, 185, 190, 190XT, 200. Will also fit 170, D14, D15, D17, D19 if cut to proper length. Can also replace 250142 used on WD, WD45 if cut to length. (Item #: 100083, Ref: 70254661) $24.90

U-Joint - Steering universal joints assembly kit handles a 1 inch and a 7/8 inch shaft. For RC, WC, WD, WD45. This joint is non repairable and must be replaced when worn out. (Item #: 110269, Ref: 202152) $127.00

U-Joint - Steering universal joints assembly kit. For WD, WD45. This joint is repairable. (Item #: 110269, Ref: 70224825) $127.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All WD Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy