FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers G Parts

Category: Lights

[Categories] [All G Parts] [All Allis Chalmers Models]

Bullet Tail Light - This Bullet style Tail Light is for models B, C, CA, G, WD, WD45, D10, D12, D14, D15. Bullet Tail Light. 6 Volt with Glass Lense. Also available in 12 Volt, order PART R4383 Instead. (Item #: 105309, Ref: R4384) $48.50

Bullet Tail Light - 12 Volt - For B, C, CA, G, WD, WD45, D10, D12, D15. Bullet Tail Light. 12 volt with glass lens. Also available in 6 volt, order part number R4384 instead. (Item #: 105310, Ref: R4383) $48.50

Headlight Bracket - This new headlight bracket fits the Allis Chalmers G tractor and replaces original part numbers 800117 and 70800117. (Item #: 180239, Ref: 70800117) $36.70

Headlight, 6 Volt - This 6 Volt headlight measures 4 3/4 inch diameter and has a 1/2 inch diameter stud for mounting. Single wire light. May come black or gray. For B, C, CA, G, D10, D12, D14. Headlight. This is a radiator mount for the D10, D12 and D14. For 12 Volt, order R4003 bulb. Replaces OEM numbers 210921, 210922, 70210921, 70210922. (Item #: 105306, Ref: R3997) $57.00

Light Switch - 3 Position - Fits B, C, CA, G, IB, RC, WC, WD, WD45, WF. Can be used to replace OEM number 70227233. (Item #: 105312, Ref: 70208197) $25.80

Universal Parts and Accessories
Category: Lights

Bulb, 12V, 5W, BAY15D Base - This Stop/Tail light Bulb is 12 Volts, 5 Watts with a BAY15D Base. It replaces: (Allis Chalmers 70928348, 72010038), (Ford / New Holland 81AG13464AA, 839336590), (Massey Ferguson 908543D1, 908543M1), International 14144690, Lucas 380, Neglin 11437, Osram 7528, Phillips 12499, Splendor 8510, Tifra 3351, Toplamp 265. (Item #: 128030, Ref: S.5074) $3.40

$Allis Chalmers G Bulb, Side \ Indicator 12V, 21W, BA15S Base$
Bulb, Side / Indicator 12V, 21W, BA15S Base - This Side / Indicator Bulb is 12 Volt, 21 Watts with a BA15S Base. It replaces 81781C1, A41264, A42295, B50218, L32258, 1-9065, 22-667, 3025210R91, 7797137, 9417866, A40855, 376902A1, 87720314, 80529068, 9970121, BN300874, SBA385120280, SFD019065, C3DB13465A, 81AG13466AA, 83BG13466AA, 83948319, 83918332, 1271735C1, AF1638, B1SB1156, LF522, LF522J, VLC0382, W164178A, 1018729M1, 14148190, 2300969, 529068, 621235D1, 621235M1, 72010005, 72097583, 81AG13466AA, 83933658, SW01855, 70251859, 71164984, Lucas 382, Neglin 13092, Osram 7506, Philips 12498, Philips 12498LLB2, Splendor 9042, Tifra 381, Toplamp 264. (Item #: 151842, Ref: S.5079) $0.50

Fender and Cab Warning Light - Super bright, this 4-1/4 inch diameter warning light has 48 LED x 1 W (48 Watts) diodes (24 per side). This is a double sided light and works with 12-30 volts. Features water dust resistance rating ip67. It has an aluminium body with mounting stud that is 1/2 inch diameter x 1-7/8 inches long. Includes washers and nut. Polycarbonate Lens. This light requires a flasher unit. If you need a flasher, order part number LED90. (Item #: 152414, Ref: 28A43) $65.00

Flashing Warning Light - Double Sided Flashing Warning Light with Flasher, with Switch. Replaces C5NN13N359E, D3NN13R300E11M, D3NN13R300E30M, D4NN13N359C (Item #: 122131, Ref: D3NN13R300E11M) $89.00

Implement Light - Tractor Implement Light. Durable, molded weatherproof housing cushions the par 36 sealed beam from road shock and vibration. Universal, 5/16 inch stud and adjustable zinc-plated bracket allow mounting in any position. 10 inch lead wire exits through the back of the housing. Sealed beam snaps into housing for fast and easy service. (Item #: 107961, Ref: L505-12V) $28.12

Implement Lights Socket, 7 Pin - Used across many brands of North American produced equipment, this 7 pin light socket features a metal housing. It replaces manufacturer part numbers 70269642, 30-3130576, 3715923M91, 73764, AR75695, A145795, A177539, A67470, E4NN13N426BA, V60345, 121645C1, 22-789, 30-3130576, 3121645C1, 3666764M1, 3713127M1, 3715923M91, 402431A2, 70269642, 737641, 82001021, 84117C1, 87451540 (Item #: 124730, Ref: 5407S) $18.30

LED Combination Flash and Turn Lamp - With many applications, this light is a replacement for OEM numbers 92185C1, 216044C91, 216044C92, 92260C1, 130882C91, 107324C91, V93104, V77050, 9706415, 86014019, 86023276, 86016518, 86012669, 87053368, 83977683. It can also be used as a universal warning / turn signal light. The lamp measures in inches 3 1/8 inches tall and 6 3/4 wide. The mounting holes are 5 3/4 inches center to center. Works for 12-24 volts. This is a 2 wire unit. Black wire is ground, Red wire is power. This light does not flash without an external flasher unit. If needed, order LED90. (Item #: 124673, Ref: WL3630) $50.00

LED Flasher - Only needed when typical flasher will not operate LED warning lights due to the lack of power draw and low resistance which is required to make lights flash. Unit flashes 50 time per minute. Voltage 12V. Amperage 0.05A -10A. Used with LED Warning lights: WL3630, WL6025, 28A43, 28A44. (Item #: 156502, Ref: LED90) $14.20

$Allis Chalmers G LED Warning \ Turn Signal Light$
LED Warning / Turn Signal Light - While this part replaces many Original Equipment Manufacture's part numbers, including 20-1950T91, 22-665, 22-665T1, 586743M91, 586743M92, 592544, 60-6246T1, 70577137, 72160876, 72160876, 72160876, A187626, AR60250, this LED lamp can also be used as a universal light. Using e LED lights, it measures 7-3/4 inches in length, 2 inches high, with 7 inch center-to-center mounting holes. It is 1-1/2 inches deep. It operates in a 10-30 Volt range. Used in Negative ground systems (black wire is the ground), this lamp features an ABS housing and is IP67 waterproof and shock proof rated. This light will outlast conventional incandescent lamps with a 50000 hours expected lifetime. The operating temperature is -40 to 140 degrees Fahrenheit. No bulbs or ballast to replace. Requires LED90 Flasher Unit to make it flash (sold separately). (Item #: 151962, Ref: WL6025) $38.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Item #: 182640, Ref: L100MAG) $37.50

Red Lens Tail Lamp - Lamp complete with bulb. Tail light assembly, 4-1/2 inch diameter red lens, body includes license lamp window. 12 volt. 1-7/8 inch mounting bolt spacing. This is a universal part and not listed for specific applications. Verify measurements before ordering. Serviceable replacement for the following OEM numbers 10A24895, 121846C91, 155005A, 162009AS, 30-3393747, 35A3316, 370306R91, 370716R91, 376850R91, 379789R91, 404418R1, 45645HA, 602603AS, 967696R92, A36831 (Item #: 182647, Ref: L428-12V) $14.30

Tail Lamp - There is no reason that this can't be used for your tractor if you need tail lights. This Round tail light is 4 inches around, with 2 1/2 inch center to center mounting holes. It is 1 1/2 inches deep and has 2 wire. If you need this light as a warning light or turn signal, order LED90 to go with it. This part is for 12 volt systems. (Item #: 182906, Ref: 131183C91) $61.00

Warning Light, Red LED - Be seen with this universal Red LED Warning light! This is a Super Bright LED featuring 25 diodes per side. It is for 12 Volt Systems. The 3 Wires are White-Ground, Black-Low Brightness and Red-High Brightness. The Lens Size is 4.000 inches. The lens is Acrylic and the body is metal. Nuts and Washers are included. This lamp can blink by using part number LED90 (not included). (Item #: 122130, Ref: 28A44) $64.00

Worklight 12 Volt - Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Item #: 178998, Ref: S.42792) $34.50

Worklight 12 Volt Black - 12 Volt worklight with handle, on/off switch, swivels and rotates. Mounting holes measure 4 3/8 inch center to center. (Item #: 178271, Ref: S.67771) $39.20

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Lights

[Categories] [All G Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy