FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers 185 Parts

Category: Hydraulic System

[Categories] [All 185 Parts] [All Allis Chalmers Models]

Hydraulic Filter - Oil filter element, spin on type. For 180, 185, 190, 190XT, D15, D17, D19, D21 (Item #: 119292, Ref: 70239930) $15.70

No
Picture
Hydraulic Pump (Triple) - For tractor models 180 and 185. (Item #: 104234, Ref: 70249437) $2249.01

Hydraulic Pump Repair Kit - Repairs triple pumps 70249828, 70256067, 7029437. For tractor models 170, 175, 180, 185. (Item #: 172881, Ref: 24D002) $258.00

Hydraulic Pump Seal Kit - For Allis Chalmers tractor models D17, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6080, 7000, 7580, 8550, Replaces Allis Chalmers OEM number 70255947, For single stage pumps, (Item #: 167583) $167.00

Hydraulic Pump, Dual - For tractor models 180, 185. (Item #: 70249469) $1475.07

No
Picture
Hydraulic Pump, Dual - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 210, 7000, Replaces Allis Chalmers OEM number 70260831, With standard and heavy duty front axle, Priority flow control hose connection out the side of the pump, Front hose connection has a #12 O-ring, Flow Rate: 4 GPM, Relief valve setting of the controlled flow section is 1, 700 psi, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 159049) $2309.01

Hydraulic Pump, Used - For Allis Chalmers tractor models 180, 185, Replaces Allis Chalmers OEM nos 70249469, Replaces Casting nos 249469, Dual Gear Pump, Splines: 13, Exposed Shaft Length: 1.75", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434154) $980.01

Universal Parts and Accessories
Category: Hydraulic System

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Item #: 118260, Ref: H42-2M-36) $15.20

Hydraulic Pump Mounting Bracket - This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8 inch diameter, 4-3/16 inch center to center. Also 2 foot mount holes 3/8 inch diameter, 5 inch center to center. Center pilot hole 3-1/4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref: 33020-1) $359.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE A Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref: 40P018LAJSA) $696.00

Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Item #: 112243, Ref: L78-13) $20.98

PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommended hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 120040, Ref: HC-PTO-1A) $1307.44

Universal Pressure Gauge, Hydraulic - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 184977, Ref: GG300) $11.70

Universal Pressure Gauge, Hydraulic - 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1/4 inch NPT male brass fitting. (Item #: 178343, Ref: GG3000) $12.30

Universal Pressure Gauge, Hydraulic - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref: GG600) $14.40

Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Item #: 178202, Ref: GG400) $8.98

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories] [All 185 Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy