FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Oliver White 2-70 Tractor Parts

[Categories] [All Oliver Models] [Print]

Brakes

Brake Actuating Spring - Used with disc brakes. For tractor models Cockshutt 35, Cockshutt 40, Cockshutt 50, Cockshutt 540, Cockshutt 560, Cockshutt 570, Cockshutt Golden Arrow, Cockshutt Golden Eagle, Super 55, 550, (77 from serial number 347904 and up), Super 77, (88 from serial number 136899 and up), Super 88, 1550, 1555, 1600, 1650, 1655, 770, 880, White 2-70, White 2-78, White 2-62, White 4-78. Replaces A30897, A41816, 1L-2608, K-260.8. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105 inch. (Item #: 113798, Ref: A155624) $1.70

Brake Actuator Disc - For tractor models White 2-70, (1650, 1655, White 2-78, White 4-78 serial number 147569 and up), (1550, 1555, White 2-62 serial number 160000 and up). (Item #: 105800, Ref: 10P3140) $103.00

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $2.90

Clutch

Clutch Bearing Carrier - Non greasable. For tractor models (1550, 1555 serial number 160000 and up), (1650, 1655 serial number 147569 and up), (White 2-62 serial number 160000 and up), White 2-70, (White 2-78, White 4-78 serial number 147569 and up), (770, 880 serial number 60501 and up). (Item #: 111700, Ref: 303057364) $117.00

Clutch Disc, Organic - 12" x 1-1/2"-19. For tractor models (1655, White 2-78, White 4-78 up to SN# 187586). (Item #: 122776, Ref: 160971AS) $115.00

Clutch Housing Tube - For tractor models 1550, 1555, 1650, 1655, White 2-44, White 2-62, White 2-70, White 2-78, White 4-78, 550. Measures 4.69 inches Length, 1.558 I.D., 1.685 O.D. (Item #: 172638, Ref: K585) $27.80

Clutch Shaft - 12.25 inches long, 19 spline. For tractor models (1600 without hydra power drive), (1650, 1655, White 2-78, White 4-78 serial number 147569 and up without hydra power or creeper drive), (White 2-70 without over/under hydraulic shift). (Item #: 172418, Ref: 155067A) $373.00

Release Bearing Fork - Throwout Bearing Fork for Models: (1550, 1555 SN# 160000 and up), 160, (1650, 1655 SN# 147569 and up), 170 Workhorse, (1750 SN# 180537 and up), 1755, (1800, 1900 SN# 90525 and up), 185, (1850, 1950 SN# 150421 and up), (1855, 1955 SN# 220000 and up), (195 Workhorse, (2050, 2150 SN# 204001 and up), (White 2-105, White 2-110, (White 2-135 SN# 272595 to 292563), (White 2-150, White 2-155, White 2-180, (2255 SN# 235650 and up), 2270, (White 2-62 SN# 160000 and up), White 2-70, (White 2-78, White 4-78 SN# 147569 and up), White 2-85, White 2-88, White 4-150, White 4-175, White 4-180, White 4-225, 60 American, (770, 880 SN# 60501 and up), 80 American. Replaces 101510A. (Item #: 172793, Ref: 72160045) $153.00

Transmission Plate, Driving - Used with over under hydraulic shift, 5.900 inch outside diameter, 4.63 inch inside diameter, 34 teeth. For tractor models 1855, 1870, White 2-105, White 2-110, White 2-150, White 2-70, White 2-85, White 2-88, 2270, White 4-150, (1955 serial number 230894 and up), (2255 serial number 235650 and up), (White 2-135, White 2-155 serial number 272595 and up). Replaces 303061809, 303368483, 303088200. (Item #: 173031, Ref: 303309487) $17.70

Transmission Plate, Seperator - Used with over under trans., 6.315" O.D., 4.570" I.D., 72 teeth. For tractor models 1855, 1870, White 2-105, White 2-110, White 2-150, White 2-70, White 2-85, White 2-88, 2270, White 4-150, (1955 SN# 230894 and up), (2255 SN# 235650 and up), (White 2-135, White 2-155 SN# 272595 and up). Replaces 303061825. (Item #: 160795, Ref: 72161788) $14.50

Cooling System

Fan, 4 Blade - 18" diameter, 1" pilot hole, 2- 4 bolt mount patterns at 2.89" and 1.765". For tractor models (1550, 1555 diesel SN# 160000 and up), 1600, (1650, 1655 diesel SN# 147569 and up), (1750 diesel SN# 180537 and up), (1755 diesel SN# 220000 and up), (White 2-62 diesel SN# 160000 and up), White 2-70 diesel, (White 2-78 diesel SN# 147569 and up), (88 SN# 44281 and up), (880 SN# 60501 and up), (G750 diesel SN# 147569 and up). (Item #: 163816, Ref: 168824A) $125.00

Fan, 4 Blade - 16" diameter, 1.062" pilot hole, 2.875" bolt hole center. For tractor models White 2-44, (White 2-70 gas), 550, (White 2-78, White 4-78, 1650, 1655 gas SN# 147569 and up), (White 2-62, 1550, 1555 gas SN# 160000 and up), (770 SN# 60501 to 73638). (Item #: 163815, Ref: 156539A) $125.00

Radiator - 2 inch inlet, 2-1/8 inch outlet may need to make hose adaptations for some tractors. For tractor models 1550, 1555, 1600, 1650, 1655, White 2-62, White 2-70, White 2-78, White 4-78 all with gas or diesel engines. Replaces OEM numbers 163342AS, 163343AS, MFG0176, 163272A, 163273A, 1652570. (Item #: 111845, Ref: R5089) $558.00

Radiator Hose, Bypass - 1.75" I.D.. For tractor models 1650, 1655, (1750 SN# 180537 and up), (1755, 1855, 1955 SN# 220000 and up), 1800, (1850 SN# 150421 and up), 1900, 1950, (1950T SN# 195080 and up), White 2-78, White 4-78, White 2-70. (Item #: 159289, Ref: 168494A) $34.30

Radiator Hose, Upper - 2.00" I.D.. For tractor models (1655, 1650 SN# 147569 and up), White 2-70 diesel. (Item #: 159234, Ref: 158664A) $15.10

Radiator Hose, Upper - 2.00" I.D.. For tractor models (1650, 1655 gas-tube to radiator SN# 147569 and up), (White 2-70 gas). (Item #: 159227, Ref: 157434A) $17.40

Thermostat - This thermostat is 3.50 inches outside diameter and opens from 167-192 F. Used on Waukesha engines: F265GA, F265LPA, F310DBT, F310DBLT, VRG310, F283DLA, F310DL, F283GB, F283GB, F283DL, F310DB, F283DB, F265G, F265LP, 195GL, F283G, F283LP, 195DLB, F310GA, F310LPA, F310DB. Used on Oliver 1650, 1655, 1750, 1755, 1850, 1855, 1955, 99, Super 99, 950. Used one White 2-70, 2-78, 4-78. Used on Minneapolis Moline G940, G750, G850. Replaces 30-3056430, 303061272, 162492A, 106700AS, 303056430, 303056430, 303049744. (Item #: 187374, Ref: 162492A) $114.00

No
Picture
Water Pump Pulley - For tractor models (White 2-70, 2-78, 4-78 ALL GAS), (1650, 1655 ALL GAS SN# 178174 and up). (Item #: 165146, Ref: 164451A) $39.40

Water Pump with Pulley - For tractor models (1650, 1655 with gas engine SN# 178174 and up), White 2-70, White 2-78, White 4-78 all with gas engine. (Item #: 172651, Ref: 163365AS) $185.00

Drive Train

Coupler Sprocket - 2 used, 14 teeth, 19 spline. For tractor models (1550, 1555, White 2-62 SN# 160000 and up with Rev-o-torc drive), (1650, 1655, White 2-78, White 4-78 SN# 147569 and up without hydro power or creeper drive), (White 2-70 without Over under hydro shift). (Item #: 172428, Ref: 107275A) $186.00

Gear Shift Boot - For tractor models 550, 660, 770, 880, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150, 2255, (White 2-70, 2-85, 2-105, 4-150, 4-180), 60 American, 80 American, Super 55, 60, 66, Super 66, 70, 77, Super 77, 88, Super 88. (Item #: 114539, Ref: BA916A) $10.00

Gear, Transmission Input Shaft, Front - 19 teeth, 25 spline. For tractor models (1600 serial number 124420 and up), (1650, 1655 serial number 147569 and up), White 2-70, (White 2-78, White 4-78 serial number 147569 and up), 80 American. (Item #: 172426, Ref: 107303A) $356.00

Thrust Washer - Transmission input shaft. For tractor models (1600 serial number 124420 and up), (1650, 1655 serial number 147569 and up), White 2-70, (White 2-78, White 4-78 serial number 147569 and up), 80 American. (Item #: 173008, Ref: 155100A) $28.10

Transmission Input Shaft - For tractor models 1600, 1650, 1655, White 2-70, White 2-78. This shaft is 11.530 inches long. (Item #: 109470, Ref: 155090A) $376.00

Transmission Input Shaft, Drive Collar - 25 teeth, 25 spline. For tractor models White 2-70, (1600 S 124420 and up), (1650, 1655, White 2-78, White 4-78 serial number 147569 and up), 80 American. (Item #: 172454, Ref: 107266A) $121.98

Transmission Input Shaft Gear Mounting Sleeve - 25 spline. For tractor models (1600 SN# 124420 and up), (1650, 1655 SN# 147569 and up), White 2-70, (White 2-78, White 4-78 SN# 147569 and up), 80 American. (Item #: 172434, Ref: 107268A) $91.00

Electrical System

Combo Switch Lever - Used with switches AM1866T, 10A971, 1K7654A, AR20430, AA5397R, 168089A, 30-3365891. For tractor models 1555, 66, 77, 88, Super 66, Super 77, Super 88, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955, 2050, 2150, 2255, White 2-70, White 2-78, White 2-85, White 2-105, White 2-110, White 2-150, White 4-78. (Item #: 105695, Ref: A4653R) $7.00

Distributor - This New Distributor, with Tach Drive is complete with points, condenser, rotor and cap. It is used on (Cockshutt; 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855), (Oliver; 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 77, 770, 88, 880, Super 77, Super 88), (White; 2-62, 2-70, 2-78, 4-78). This distributor will be a direct replacement for distributors with tachometer drives. If you have a tachometer drive just below your distributor, you will have to remove the drive assembly and create a cover plate and gasket to cover the hole where the tachometer drive is removed. You will then use the tachometer drive on the distributor. This is a mechanical advance distributor. If you have a vacuum advance, you will no longer use vacuum advance. For tune up, order ATK1DCR points, rotor and condenser, and 21A443 Cap. Replaces 158859AS, 1K7324, 1111702, 1111750, 1KA7324, 101129AS, 60261-C, 60261C, 30-3417778, D2563-1AA, 156126-AS, 156126AS, 1112632, 1112603, 106106AS. (Item #: 163591, Ref: R8119) $362.00

Key Switch - 5 terminal, with keys and jam nut. For tractor models Cockshutt 550, Cockshutt 560, Cockshutt 570, Super 55, 550, 660, 770, 880, 950, 1555, 1600, 1650, 1655, 1750, 1755, 1850, 1855, 2255, 1950, 1955, 2150, White 100, White 140, White 160, White 2-70, White 2-85, White 2-88, White 2-105, White 2-110, White 2-135, White 2-150, White 2-155. Replaces 100423ASA, 105232AS, 611064AS, 721146A. (Item #: 115836, Ref: T18021B) $36.10

Light Switch - 4 position, uses A4653R lever.DOES NOT COME WITH LEVER. For tractor models 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955, 2050, 2150, 2255, White 2-70, White 2-78, White 2-85, White 2-105, White 2-110, White 2-150, White 4-78. (Item #: 107949, Ref: 30-3365891) $66.00

Starter - 12 volt, 10 tooth, clockwise rotation. For White Models: (2-70 1978 to 1982 with Waukesha 283), (2-85 1975 to 1982 with Perkins 6-354), (2-88 1983 to 1984 with Perkins 6-354), (2-105 1975 to 1982 with Perkins 6-354), (2-110 1982 to 1984 with Perkins 6-354). Replaces 113656. (Item #: 102202, Ref: SDR0076) $285.00

No
Picture
Starter - 12 volt, 10 tooth, clockwise rotation. For model s: (550 Diesel 1958-69), (550D 1967-69), (550 Diesel 1971-73), (1555 1975 with 232 dsl), (1655 1975 with 283 dsl), (White 2-70 1975-77 with Waukesha 283). Replaces 1108648, 1107539, 1108253. (Item #: 116954, Ref: SNK0004) $134.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 105386A, 105386A, 1K7392A, 1K7392C, 72160068, 7A7392, K7392A, T18524, TG07803, TO18117, TO7803. (Item #: 121141, Ref: R7994) $13.90

Tune-up Kit, Mallory Distributors - Includes points, condenser. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, White 2-70. (Item #: 182843, Ref: 6806R) $32.70

Engine Gaskets

No
Picture
Conversion Gasket Set - Converts head gasket set into overhaul gasket set. For tractor models (1650, 1655, White 2-70 diesel up to SN# 187585), (1750, 1755 gas or diesel), (1800 from SN# 124396 gas or diesel), (1850, 1855, 1950 with 310 Waukesha gas). (Item #: 131602, Ref: CS3809) $111.00

Head Gasket Set - For 1650, 1655, White 2-70 Diesel (To S#187585) (Item #: 107620, Ref: HS3809) $248.00

No
Picture
Head Gasket Set - For tractor models (1650, 1655, White 2-70 Diesel From S#187586) (Item #: 107468, Ref: HS3842VC) $125.00

Engine Parts

Crankshaft Retainer, Rear - For tractor models White 2-70, (1650, 1655, White 2-78, White 4-78 SN# 147569 and up), (1850 SN# 150421 and up), (1550, 1555, White 2-62 SN# 160000 and up), (1750 SN# 180537 and up), (1950T SN# 194080), (1755, 1855, 1955 SN# 220000 and up). Replaces 162508AS, 155717AS, 303142574. (Item #: 172640, Ref: 168150AS) $52.98

Flywheel, Less Ring Gear - For tractor models 1655, White 2-70, (1650 SN# 187586 and up). Replaces 164605AS. Additional $25 shipping due to size and weight. (Item #: 159123, Ref: 168805AS) $702.00

Engine Pistons and Sleeves

Sleeve and Piston Kit, Single Cylinder - 3 7/8 Bore, Recessed Head Piston. For tractor models 1650, 1655, White 2-70 Diesel (From SN# 187586). (Item #: 166227, Ref: R3463) $136.00

Fuel System / Air Intake

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Oliver and White tractors, it is used on the following carburetors: TSX49, TSX120, TSX138, TSX168, TSX181, TSX186, TSX221, TSX363, TSX374, TSX380, TSX384, TSX397, TSX399, TSX405, TSX418, TSX477, TSX581, TSX603, TSX610, TSX665, TSX738, TSX755, TSX791, TSX807, TSX811, TSX868, TSX880, TSX903, USX29, USX32, USX32-1. These carburetors are possible on the following models 2-44, 2-70, 60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, 99, Super 99, Super 44, Super 55, Super 66, 440, 550, 900, 950, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, OC-4, OC-9, OC-12. Replaces 1H7610, H7610 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor Float - Use with Marvel Schebler Carbs: TSX168, TSX394, TSX396, TSX399, TSX477, TSX581, TSX807, TSX868, TSX880 For 99, 900, 1600, 1650, 1655, 1800, OC-12, White 2-70. (Item #: 108451, Ref: R4012) $31.70

Fuel Injection Return, T Boot - For tractor models 1650, 1655, 1750, 1755, 1855, 1950T, 1955, White 2-70, White 2-78, White 4-78, (78 Forklift), (7815, 7817 Backhoes). ***Price is for package of 12*** (Item #: 154222, Ref: 163670A) $23.30

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 1J-5304, 1J5304. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Precleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractor models 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1855 gas only, 1900, 1950, White 2-70. Can replace Donaldson Bowl part number P02-0227. Replaces 101965A. (Item #: 157279, Ref: R28794) $8.20

Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet Includes a 5/16" line compression adapter fitting. Fuel Strainer Assembly. For tractor models 550, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950T, 2150, White 2-44, White 2-62, White 2-70, White 2-78, (66, Super 66, 77, Super 77, 88, Super 88 with modification, shorten stand pipe to fit). Fuel Strainer Assembly with 3/8 inch pipe connection to tank, 1/8 inch pipe outlet. Replaces JAS841. (Item #: 105370, Ref: 61782C91) $18.30

Sediment Bowl Assembly - Fits on models: 550, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950T, 2050, 2150, White 2-44, White 2-62, White 2-70, White 2-78, (66, Super 66, 77, Super 77, 88, Super 88 with modification-Shorten pipe stand to fit). Also replaces OEM #WJAS841. (61578S) (Item #: 105362, Ref: JAS841) $22.50

Gauges

Tachometer Cable-60 Inches Long - For tractor models 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150, 2255 (4WD), 1550, 1555, 1650, 1655, White 2-78, White 2-70 (diesel only). (Item #: 122466, Ref: 100579AS) $54.00

Hitch / Drawbar

Sway Block, LH - For tractor models White 2-70, 80 American, (1550, 1555, White 2-62 SN# 206349 and up), (1650, 1655, White 2-78, White 4-78 SN# 206824 and up). (Item #: 172786, Ref: 167570A) $83.00

Sway Block, RH - For tractor models White 2-70, 80 American, (1550, 1555, White 2-62 SN# 206349 and up), (1650, 1655, White 2-78, White 4-78 SN# 206824 and up). (Item #: 172784, Ref: 167569A) $86.00

Hydraulic System

Hydraulic Gear Pump, Main - For tractor models 1600, 1650, 1750, 1800, 1850, 1950, White 2-70. This pump is for open center system. Notice: If old pump has bolt-on cast iron suction discharge fitting with relief valve, this pump will not fit applications. (Item #: 104244, Ref: 303062449) $620.00

Hydraulic Power Drive Filter - Fits tractor models 1550, 1555, 1750, 1755, 1800, 1900, 1950T, 1955. Used as Trans Pressure Lube Filter on models 1650, 1655, 1750, 1755, 1800, 1900, 1950T, 1955, 2050, 2255, White 2-70, White 2-85, White 2-88, White 2-105, White 2-110, White 4-150, White 4-175, White 4-180. Used as Reverse-O-Torc Filter on models White 2-62, White 2-78, White 4-78. Used as Over-under-Hydraulic Shift Filter on models: 1650, 1655, 1750, 1755, 1950T, 1955, 2050, 2255, White 2-70, White 2-85, White 2-88, White 2-105, White 2-110, White 2-135, White 2-155, White 4-150. (Item #: 126304, Ref: 156513A) $8.40

Lights

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $39.00

PTO / Driveline

PTO Clutch Plate, Driven - For tractor models 1550, 1555, 1650, 1655, 1750, 1800, 1850, 1900, 1950, White 2-62, White 2-70, White 2-78, White 4-78. Replaces 105651A. (Item #: 111893, Ref: 159097A) $16.10

PTO Clutch Plate, Driven - 6.00 inch outside diameter, 4.255 inch inside diameter. For tractor models 1550, 1555, 1650, 1655, 1750, 1800, 1850, 1900, 1950, White 2-62, White 2-70, White 2-78, White 4-78. (Item #: 111892, Ref: 105650A) $185.00

PTO Clutch Spider - For tractor models White 2-70, (1650, 1655, White 2-78, White 4-78 serial number 147569 and up), (1550, 1555, White 2-62 serial number 160000 and up). (Item #: 172637, Ref: 163297A) $392.00

PTO Output Shaft Bearing - The measurements on the bearing are 1-17/32 inches inside diameter, 3-9/64 inches outside diameter. Used on White 2-78, White 4-78, 100, 120, 125 Workhorse, 145 Workhorse, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1870, 1950, 1950T, 1955, White 2-105, White 2-110, White 2-135, White 2-150, White 2-155, White 2-62, White 2-70, White 2-85, White 2-88, 2050, 2150, 2255, 2270, White 4-150, White 4-175, White 4-180, 60 American, 80 American. Replaces OEM numbers JD8524, 158363A, 662519R1, 71131910, 88128R, 88128RA, 72161731. Note, many models listed have more than one PTO configuration. Verify OEM numbers or measurements before ordering. (Item #: 114890, Ref: 88128R) $15.90

PTO Shaft, 540 RPM - 23 spline. For tractor models White 2-70, 60 American, 80 American, (1650, 1655, White 2-78, White 4-78 serial number 147569 and up), (1550, 1555, White 2-62 serial number 160000 and up). (Item #: 116894, Ref: 158287A) $197.00

Sheet Metal / Body Parts

Battery Box - For tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1800, 1850, 1900, 1950, White 2-70. Battery box is base with back, tappered sides, and front lip. 2 of these boxes are used on some models. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104167, Ref: 108016A) $73.00

Battery Clamp Kit - This Kit includes Clamp, J-Bolts, and Nuts. Replaces 157011A, 108021A (Item #: 187376, Ref: 157011A) $28.50

Grill Screen - For tractor models White 2-110, White 2-70, White 2-88, White 2-85 SN# 268142 and up), (White 2-105 SN# 276762). Replaces 303191036. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 127265, Ref: 303441784) $168.00

Steering

Jam Nut - For the following tractors: 100, 120, 125, 1355, 145, 1555, 1600, 1655, 170, 1750, 1755, 1800, 1850, 1855, 195, 1955, White 100, White 120, White 125, White 145, White 170, White 2-110, White 2-135, White 2-150, White 2-155, White 2-180, White 2-70, White 2-88, White 2-105 with serial number below 255216, White 2-85 with serial number below 263341. Replaces 72161733. (Item #: 105244, Ref: 192928M1) $9.00

Rubber Dust Cover For Tilt Steering Wheel - The measurements on this Dust Cover are 2.498 inch outside diameter and 1.350 inches tall. Replaces 30-3346595, 30-3080080, 10A30798, 10A23441, 30A158, 70266946. Used on Oliver Tractors: 1800, 1855, 1900, 1955, 2155, 2255, 2655. Used on White Tractor: 2-70, 2-85, 2-88, 2-105, 2-110, 2-135, 2-150, 2-155, 2-180 (s/n 301922-later), 4-180, 60 American, 80 American (Item #: 115580) $26.10

Spindle, LH - Measures A= 10.750", B= 1.747", C= 1.750", D= 1.375". For tractor models White 2-105, White 2-70, White 2-85 all with Wheatland axle. The wheel bearing kit used on this spindle is kit part number WBKWH1. (Item #: 105274, Ref: 303117006) $270.00

Spindle, RH - Measures A= 10.750", B= 1.747", C= 1.750", D= 1.375". For tractor models White 2-105, White 2-70, White 2-85 all with Wheatland axle. The wheel bearing kit used on this spindle is kit part number WBKWH1. (Item #: 105273, Ref: 303116999) $238.00

$Oliver White 2-70 Spindle, RH\LH$
Spindle, RH/LH - Measures A= 16.250", B= 1.747", C= 1.750", D= 1.375". For tractor models 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1950T, 1955, White 2-105, White 2-110, White 2-70, White 2-78, White 85, White 2-88, White 4-78. The wheel bearing kit used on this spindle is kit part number WBKWH1. (Item #: 102698, Ref: 161959A) $230.00

Steering Arm, Center - 6 spline center hole, for use with small tie rods and 72160341 shaft. For tractor models (1550, 1555 regular tread SN# 160000 and up), (1650, 1655 row crop SN# 147569 and up), (1755 regular tread SN# 220000 and up), (1855, 1955 row crop SN# 220000 and up), (White 2-105 SN# 255216 to 271913), (2255 SN# 235650 and up), (White 2-62 regular tread SN# 160000 and up), White 2-70, (White 2-78 row crop SN# 147569 and up), (White 2-85 SN# 263341 to 271719), (White 4-78 row crop SN# 147569 and up). (Item #: 105239, Ref: 303089991) $291.00

Steering Arm, Center - For tractor models (White 2-105, White 2-70, White 2-85 all with wheatland axle and power steering). (Item #: 105238, Ref: 303117057) $266.00

Steering Arm, LH - For tractor models (White 2-105 SN# 255216 to 271913 with adj. or wheatland from axle), (White 2-70 with adj. or wheatland front axle), (White 2-85 SN# 263341 to 271719 with adj. or wheatland front axle). (Item #: 172667, Ref: 303089983) $93.00

Steering Arm, RH - For tractor models (White 2-105 SN# 255216 to 271913 with adj. or wheatland from axle), (White 2-70 with adj. or wheatland front axle), (White 2-85 SN# 263341 to 271719 with adj. or wheatland front axle). (Item #: 172668, Ref: 303089975) $63.00

Steering Shaft, Pitman - 10.062" long, 6 tapered splines. For tractor models GTW100, GTW120, GTW125, GTW145, White 2-105, White 2-110, White 2-135, White 2-155, White 2-70, White 2-85, White 2-88, (1555, 1655, 1755, 1855, 1955, 2255 all late models). Replaces 303045625, 303099423. (Item #: 105230, Ref: 72160341) $219.00

Steering Wheel Boot with Retainer - For tractor models 1755, 1855, 1955, 2255, White 2-70, White 2-85, White 2-105. (Item #: 179935, Ref: 30-3019616) $59.48

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Tie Rod Assembly - For tractor models 1555, 1600, 1655, 1750, 1755, 1800, 1850, 1855, 1955, White 2-70, (White 2-105 SN# 255216 TO 271913), (White 2-85 SN# 263341 TO 271719), 1650. Replaces 662201. (Item #: 102700, Ref: 164210AS) $66.00

Tie Rod End - Sliding, notched (15) 18-3/4" to center of post, 15/16 diameter rod with 15 notches. For row crop adjustement from axles with power steering, except narrow. For White Models: 2-70, 2-85 SN# 263341 to SN# 271719, 2-105 SN# 255216 to SN# 271913; Oliver Models: 1555, 1655, 1755, 1855, 1955. (Item #: 102710, Ref: 164365A) $34.95

Tie Rod End - Threaded, RH threads, 4" to center of post 1 inch diameter. For row crop adjustable front axles with power steering except narrow. For White Models: 2-70, 2-85 SN# 263341 to SN# 284964, 2-105 SN# 255216 to SN# 285182; Oliver Models: 1555, 1655, 1755, 1855, 1955. Replaces 164366A, 25-1004897. (Item #: 100866, Ref: 25-1001398) $16.00

Wheels

Front Rim-Heavy Duty - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces 100014A, 30-3040003, K905277, K907805, G57046, K914312, 3114166R91 (Item #: 116854, Ref: FW55166) $70.00

Front Wheel Hub - For tractor models White 2-70, White 2-85, (1750, 1755 all with adj. tread), (1650, 1655, White 2-78, White 4-78 all with extra hi-clearance), (1850, 1855 all with reg narrow adj. tread). (Item #: 105224, Ref: 161963A) $78.00

Front Wheel Hub, 6 Bolt - Outer brg. cup 2.873" O.D. check dimensions before ordering hub. For tractor models 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1950T, 1955, White 2-105, White 2-110, White 2-70, White 2-78, White 2-85, White 2-88, White 4-78. (Item #: 102714, Ref: 303363651) $172.00

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 100094A, T14752. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

No
Picture
Wheel Bearing Kit - Kit conains 1 of each of the following 25877 bearing, 25821 bearing cup, 25580 bearing, 25520 bearing cup, 163101A seal. For tractor models Field Boss 185, 1650, 1655, 1750, 1755, 1850, 1855, 1870, 1950, 1950T, 1955, White 2-105, White 2-110, White 2-150, White 2-70, White 2-78, White 2-85, White 2-88, White 4-78, Field Boss 185. (Item #: 100007, Ref: WBKWH1) $37.90

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Oliver Shield Decal - 3/4 inch. printed on vinyl. Decal size is 3/4 inch by 3/4 inch. (Item #: 178286, Ref: R5239) $2.50

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $98.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Item #: 179436, Ref: AL65) $4.40

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Switch - Used on models with 6 volt manual starters. Replaces B7392A (Item #: 105684, Ref: 9N11450A) $10.30

Starter Switch - 4-position: LEFT=accessories, CENTER=off, RIGHT accessories and ignition, FAR RIGHT start. 4 stud terminals. 7/16 inch long mounting stem with 3/4 inch dia. 2 brass keys. 1 1/8 inch mounting nut. This does not fit all models. (Item #: 109511, Ref: 782979) $19.90

$Oliver White 2-70 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $104.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $166.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $149.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Oliver White 2-70 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Oliver White 2-70 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Oliver White 2-70 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Oliver White 2-70 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Oliver White 2-70 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Oliver White 2-70 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.30

Carburetor Elbow and Strainer - Fits some Oliver and Cockshutt models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

$Oliver White 2-70 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF2-25 filter assembly. (Item #: 159754, Ref: 1A9253) $42.60

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.50

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $18.40

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $242.80

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $97.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.70

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $67.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.90

No
Picture
Paint, Cockshutt Red, 1 Quart - This Cockshutt Red is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on models from 1969-1975, 1555, 1655, 1755, 1855.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108385, Ref: TP185QT) $29.80

No
Picture
Paint, Cockshutt Red, Spray Can - This Cockshutt Red is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on models from 1969-1975, 1555, 1655, 1755, 1855.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108018, Ref: TP185SP) $9.80

No
Picture
Paint, Cockshutt Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108392, Ref: TP175GAL) $111.00

No
Picture
Paint, Cockshutt Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108391, Ref: TP175QT) $46.20

No
Picture
Paint, Cockshutt Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108390, Ref: TP175SP) $9.10

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Grey Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Med. Green, 1 Gallon - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102964, Ref: TP221GAL) $63.00

No
Picture
Paint, Med. Green, 1 Quart - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102963, Ref: TP221QT) $23.30

No
Picture
Paint, Med. Green, Spray Can - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102962, Ref: TP221SP) $8.30

No
Picture
Paint, Oliver Yellow, 1 Gallon - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108392, Ref: TP224GAL) $111.00

No
Picture
Paint, Oliver Yellow, 1 Quart - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108391, Ref: TP224QT) $46.20

No
Picture
Paint, Oliver Yellow, Spray Can - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108390, Ref: TP224SP) $9.10

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056) $2161.57

Tie-on Seat Cover - Green and Red, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179515, Ref: R2603) $51.00

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $408.00

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref: S.04352) $3.20

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 100014A, 30-3040003 (Item #: 103768, Ref: FW60166) $94.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $103.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $63.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00