Tractor Talk Discussion Board |
Re: Round Up ????
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by super99 on June 21, 2007 at 17:35:25 from (207.144.199.88):
In Reply to: Round Up ???? posted by Devin Sparks on June 21, 2007 at 10:07:39:
You said you calibrated your spray rig, What figures did you end up with? That should tell you. The nozzles have a name and number on them, then you can look at a nozzle chart and figure your speed and gallons per acre. Did you measure off 100 ft. and time the run to check MPH? Need to keep your speed as uniform as possible. Run full throtttle or if you have a tach, same RPM all the time, speed changes will throw off you gallons/acre. Was the tank full when you checked you mph? depends on how big your tractor is, full tank can slow you down and pick speed as it empties. I just don't understand, you said you calibrated the sprayer. If you did, then you should know how fast you are going and how many gallons/acre you are applying. Divide 325 by the gallons/acre you are spraying and take that times 1 qt/acre. If you don't have any, get some anti-foam and use it!!! If you fill from the top, you HAVE to have anti-foam in water first!!! Chris
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|