Tractor Talk Discussion Board |
Re: Re: Home made snow plow
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by old on November 10, 2003 at 19:51:06 from (63.189.40.78):
In Reply to: Re: Home made snow plow posted by RayP(MI) on November 10, 2003 at 19:07:26:
I use this on an 801 ford with front end loader. I took and old boiler tank and cut two pieces out of it 5'X2' and made a V plow, at the bottom if it I took a piece of U iron to fit the bottom lip of the bucket and welded it to the V with 2 angle iron pieces slanted in words make it easy to line it up with the bucket and on top of the V made a piece that goes back to the top of the bucket and a piece of U iron there also. when its up to the bucket I put a couple chains around it and bommer it tight and off I go. works very well and the V keeps it from pushing the front of the tractor to one side or the other. Makeing the V is the hardest part of the welding/cutting. E-mail me if you would like more and maybe I'll even get some picture of it. If enough people ask.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|