Tractor Talk Discussion Board |
Case VAC Generator operation
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ted Ackerson on September 09, 2002 at 16:11:04 from (152.163.188.71):
I have a Case VAC with a generator with a cut-off (no voltage regularor)and I don't think I see more than 6 volts when the light switch is in the first or second position which as I read is suspose to be generating 8 volts. The generator has two connections one to the ampmeter and one to the light switch. I assume the one to the ampmeter gererates the voltage. Is the one to the light switch a field conection? On measuring resistance from the generation connection that goes to the light switch I do see a resistance with the switch off and no resistance with the switch in the first or second position. How does all this work and what does the cut-0ff switch do? I do have an electrical background so a circuit diagram would help. Thanks, Ted A.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|